ARM: dts: imx: replace gpio-key,wakeup with wakeup-source property

Most of the legacy "gpio-key,wakeup" and "enable-sdio-wakeup" boolean
properties are already replaced with "wakeup-source". However few
occurrences of old property has popped up again, probably from the
remnants in downstream trees. Almost all of those were remove couple
of years back.

Replace the legacy properties with the unified "wakeup-source" property
introduced in the commit 700a38b27eef ("Input: gpio_keys - switch to using
generic device properties") and commit 0dbcdc0622ea ("mmc: core: enable
support for the standard "wakeup-source" property")

Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: NXP Linux Team <linux-imx@nxp.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

diff --git a/arch/arm/boot/dts/imx6q-pistachio.dts b/arch/arm/boot/dts/imx6q-pistachio.dts
index 5edf858..a31b17e 100644 (file)
--- a/arch/arm/boot/dts/imx6q-pistachio.dts
+++ b/arch/arm/boot/dts/imx6q-pistachio.dts
@@ -103,7 +103,7 @@
                power {
                        label = "Power Button";
                        gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
-                       gpio-key,wakeup;
+                       wakeup-source;
                        linux,code = <KEY_POWER>;
                };
        };

diff --git a/arch/arm/boot/dts/imx6sll-evk.dts b/arch/arm/boot/dts/imx6sll-evk.dts
index d816370..4a31a41 100644 (file)
--- a/arch/arm/boot/dts/imx6sll-evk.dts
+++ b/arch/arm/boot/dts/imx6sll-evk.dts
@@ -309,7 +309,7 @@
        pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
        cd-gpios = <&gpio3 22 GPIO_ACTIVE_LOW>;
        keep-power-in-suspend;
-       enable-sdio-wakeup;
+       wakeup-source;
        vmmc-supply = <&reg_sd3_vmmc>;
        status = "okay";
 };