/*
* Try to release the slave device <slave> from the bond device <master>
* It is legal to access curr_active_slave without a lock because all the function
- * is write-locked.
+ * is write-locked. If "all" is true it means that the function is being called
+ * while destroying a bond interface and all slaves are being released.
*
* The rules for slave state should be:
* for Active/Backup:
* for Bonded connections:
* The first up interface should be left on and all others downed.
*/
-int bond_release(struct net_device *bond_dev, struct net_device *slave_dev)
+static int __bond_release_one(struct net_device *bond_dev,
+ struct net_device *slave_dev,
+ bool all)
{
struct bonding *bond = netdev_priv(bond_dev);
struct slave *slave, *oldcurrent;
synchronize_net();
write_lock_bh(&bond->lock);
- if (!bond->params.fail_over_mac) {
+ if (!all && !bond->params.fail_over_mac) {
if (ether_addr_equal(bond_dev->dev_addr, slave->perm_hwaddr) &&
bond->slave_cnt > 1)
pr_warning("%s: Warning: the permanent HWaddr of %s - %pM - is still in use by %s. Set the HWaddr of %s to a different address to avoid conflicts.\n",
write_lock_bh(&bond->lock);
}
- if (oldcurrent == slave) {
+ if (all) {
+ bond->curr_active_slave = NULL;
+ } else if (oldcurrent == slave) {
/*
* Note that we hold RTNL over this sequence, so there
* is no concern that another slave add/remove event
return 0; /* deletion OK */
}
+/* A wrapper used because of ndo_del_link */
+int bond_release(struct net_device *bond_dev, struct net_device *slave_dev)
+{
+ return __bond_release_one(bond_dev, slave_dev, false);
+}
+
/*
* First release a slave and then destroy the bond if no more slaves are left.
* Must be under rtnl_lock when this function is called.
}
/*
- * This function releases all slaves.
- */
-static int bond_release_all(struct net_device *bond_dev)
-{
- struct bonding *bond = netdev_priv(bond_dev);
- struct slave *slave;
- struct net_device *slave_dev;
- struct sockaddr addr;
-
- write_lock_bh(&bond->lock);
-
- netif_carrier_off(bond_dev);
-
- if (bond->slave_cnt == 0)
- goto out;
-
- bond->current_arp_slave = NULL;
- bond->primary_slave = NULL;
- bond_change_active_slave(bond, NULL);
-
- while ((slave = bond->first_slave) != NULL) {
- /* Inform AD package of unbinding of slave
- * before slave is detached from the list.
- */
- if (bond->params.mode == BOND_MODE_8023AD)
- bond_3ad_unbind_slave(slave);
-
- slave_dev = slave->dev;
- bond_detach_slave(bond, slave);
-
- /* now that the slave is detached, unlock and perform
- * all the undo steps that should not be called from
- * within a lock.
- */
- write_unlock_bh(&bond->lock);
-
- /* unregister rx_handler early so bond_handle_frame wouldn't
- * be called for this slave anymore.
- */
- netdev_rx_handler_unregister(slave_dev);
- synchronize_net();
-
- if (bond_is_lb(bond)) {
- /* must be called only after the slave
- * has been detached from the list
- */
- bond_alb_deinit_slave(bond, slave);
- }
-
- bond_destroy_slave_symlinks(bond_dev, slave_dev);
- bond_del_vlans_from_slave(bond, slave_dev);
-
- /* If the mode USES_PRIMARY, then we should only remove its
- * promisc and mc settings if it was the curr_active_slave, but that was
- * already taken care of above when we detached the slave
- */
- if (!USES_PRIMARY(bond->params.mode)) {
- /* unset promiscuity level from slave */
- if (bond_dev->flags & IFF_PROMISC)
- dev_set_promiscuity(slave_dev, -1);
-
- /* unset allmulti level from slave */
- if (bond_dev->flags & IFF_ALLMULTI)
- dev_set_allmulti(slave_dev, -1);
-
- /* flush master's mc_list from slave */
- netif_addr_lock_bh(bond_dev);
- bond_mc_list_flush(bond_dev, slave_dev);
- netif_addr_unlock_bh(bond_dev);
- }
-
- bond_upper_dev_unlink(bond_dev, slave_dev);
-
- slave_disable_netpoll(slave);
-
- /* close slave before restoring its mac address */
- dev_close(slave_dev);
-
- if (!bond->params.fail_over_mac) {
- /* restore original ("permanent") mac address*/
- memcpy(addr.sa_data, slave->perm_hwaddr, ETH_ALEN);
- addr.sa_family = slave_dev->type;
- dev_set_mac_address(slave_dev, &addr);
- }
-
- kfree(slave);
-
- /* re-acquire the lock before getting the next slave */
- write_lock_bh(&bond->lock);
- }
-
- eth_hw_addr_random(bond_dev);
- bond->dev_addr_from_first = true;
-
- if (bond_vlan_used(bond)) {
- pr_warning("%s: Warning: clearing HW address of %s while it still has VLANs.\n",
- bond_dev->name, bond_dev->name);
- pr_warning("%s: When re-adding slaves, make sure the bond's HW address matches its VLANs'.\n",
- bond_dev->name);
- }
-
- pr_info("%s: released all slaves\n", bond_dev->name);
-
-out:
- write_unlock_bh(&bond->lock);
-
- bond_compute_features(bond);
-
- return 0;
-}
-
-/*
* This function changes the active slave to slave <slave_dev>.
* It returns -EINVAL in the following cases.
* - <slave_dev> is not found in the list.
bond_netpoll_cleanup(bond_dev);
/* Release the bonded slaves */
- bond_release_all(bond_dev);
+ while (bond->first_slave != NULL)
+ __bond_release_one(bond_dev, bond->first_slave->dev, true);
+ pr_info("%s: released all slaves\n", bond_dev->name);
list_del(&bond->bond_list);