int hci_register_cb(struct hci_cb *hcb);
int hci_unregister_cb(struct hci_cb *hcb);
-struct hci_request {
- struct hci_dev *hdev;
- struct sk_buff_head cmd_q;
-
- /* If something goes wrong when building the HCI request, the error
- * value is stored in this field.
- */
- int err;
-};
-
-void hci_req_init(struct hci_request *req, struct hci_dev *hdev);
-int hci_req_run(struct hci_request *req, hci_req_complete_t complete);
-void hci_req_add(struct hci_request *req, u16 opcode, u32 plen,
- const void *param);
-void hci_req_add_ev(struct hci_request *req, u16 opcode, u32 plen,
- const void *param, u8 event);
-void hci_req_cmd_complete(struct hci_dev *hdev, u16 opcode, u8 status);
bool hci_req_pending(struct hci_dev *hdev);
-void hci_req_add_le_scan_disable(struct hci_request *req);
-void hci_req_add_le_passive_scan(struct hci_request *req);
-
-void hci_update_page_scan(struct hci_dev *hdev);
-void __hci_update_page_scan(struct hci_request *req);
-
struct sk_buff *__hci_cmd_sync(struct hci_dev *hdev, u16 opcode, u32 plen,
const void *param, u32 timeout);
struct sk_buff *__hci_cmd_sync_ev(struct hci_dev *hdev, u16 opcode, u32 plen,
void hci_le_start_enc(struct hci_conn *conn, __le16 ediv, __le64 rand,
__u8 ltk[16]);
-int hci_update_random_address(struct hci_request *req, bool require_privacy,
- u8 *own_addr_type);
void hci_copy_identity_address(struct hci_dev *hdev, bdaddr_t *bdaddr,
u8 *bdaddr_type);
bluetooth-y := af_bluetooth.o hci_core.o hci_conn.o hci_event.o mgmt.o \
hci_sock.o hci_sysfs.o l2cap_core.o l2cap_sock.o smp.o sco.o lib.o \
- a2mp.o amp.o ecc.o
+ a2mp.o amp.o ecc.o hci_request.o
subdir-ccflags-y += -D__CHECK_ENDIAN__
#include <net/bluetooth/hci_core.h>
#include <net/bluetooth/l2cap.h>
+#include "hci_request.h"
#include "smp.h"
#include "a2mp.h"
#include <net/bluetooth/l2cap.h>
#include <net/bluetooth/mgmt.h>
+#include "hci_request.h"
#include "smp.h"
static void hci_rx_work(struct work_struct *work);
BT_ERR("Disable LE scanning request failed: err %d", err);
}
-static void set_random_addr(struct hci_request *req, bdaddr_t *rpa)
-{
- struct hci_dev *hdev = req->hdev;
-
- /* If we're advertising or initiating an LE connection we can't
- * go ahead and change the random address at this time. This is
- * because the eventual initiator address used for the
- * subsequently created connection will be undefined (some
- * controllers use the new address and others the one we had
- * when the operation started).
- *
- * In this kind of scenario skip the update and let the random
- * address be updated at the next cycle.
- */
- if (test_bit(HCI_LE_ADV, &hdev->dev_flags) ||
- hci_conn_hash_lookup_state(hdev, LE_LINK, BT_CONNECT)) {
- BT_DBG("Deferring random address update");
- set_bit(HCI_RPA_EXPIRED, &hdev->dev_flags);
- return;
- }
-
- hci_req_add(req, HCI_OP_LE_SET_RANDOM_ADDR, 6, rpa);
-}
-
-int hci_update_random_address(struct hci_request *req, bool require_privacy,
- u8 *own_addr_type)
-{
- struct hci_dev *hdev = req->hdev;
- int err;
-
- /* If privacy is enabled use a resolvable private address. If
- * current RPA has expired or there is something else than
- * the current RPA in use, then generate a new one.
- */
- if (test_bit(HCI_PRIVACY, &hdev->dev_flags)) {
- int to;
-
- *own_addr_type = ADDR_LE_DEV_RANDOM;
-
- if (!test_and_clear_bit(HCI_RPA_EXPIRED, &hdev->dev_flags) &&
- !bacmp(&hdev->random_addr, &hdev->rpa))
- return 0;
-
- err = smp_generate_rpa(hdev, hdev->irk, &hdev->rpa);
- if (err < 0) {
- BT_ERR("%s failed to generate new RPA", hdev->name);
- return err;
- }
-
- set_random_addr(req, &hdev->rpa);
-
- to = msecs_to_jiffies(hdev->rpa_timeout * 1000);
- queue_delayed_work(hdev->workqueue, &hdev->rpa_expired, to);
-
- return 0;
- }
-
- /* In case of required privacy without resolvable private address,
- * use an non-resolvable private address. This is useful for active
- * scanning and non-connectable advertising.
- */
- if (require_privacy) {
- bdaddr_t nrpa;
-
- while (true) {
- /* The non-resolvable private address is generated
- * from random six bytes with the two most significant
- * bits cleared.
- */
- get_random_bytes(&nrpa, 6);
- nrpa.b[5] &= 0x3f;
-
- /* The non-resolvable private address shall not be
- * equal to the public address.
- */
- if (bacmp(&hdev->bdaddr, &nrpa))
- break;
- }
-
- *own_addr_type = ADDR_LE_DEV_RANDOM;
- set_random_addr(req, &nrpa);
- return 0;
- }
-
- /* If forcing static address is in use or there is no public
- * address use the static address as random address (but skip
- * the HCI command if the current random address is already the
- * static one.
- */
- if (test_bit(HCI_FORCE_STATIC_ADDR, &hdev->dbg_flags) ||
- !bacmp(&hdev->bdaddr, BDADDR_ANY)) {
- *own_addr_type = ADDR_LE_DEV_RANDOM;
- if (bacmp(&hdev->static_addr, &hdev->random_addr))
- hci_req_add(req, HCI_OP_LE_SET_RANDOM_ADDR, 6,
- &hdev->static_addr);
- return 0;
- }
-
- /* Neither privacy nor static address is being used so use a
- * public address.
- */
- *own_addr_type = ADDR_LE_DEV_PUBLIC;
-
- return 0;
-}
-
/* Copy the Identity Address of the controller.
*
* If the controller has a public BD_ADDR, then by default use that one.
}
}
-void hci_req_init(struct hci_request *req, struct hci_dev *hdev)
-{
- skb_queue_head_init(&req->cmd_q);
- req->hdev = hdev;
- req->err = 0;
-}
-
-int hci_req_run(struct hci_request *req, hci_req_complete_t complete)
-{
- struct hci_dev *hdev = req->hdev;
- struct sk_buff *skb;
- unsigned long flags;
-
- BT_DBG("length %u", skb_queue_len(&req->cmd_q));
-
- /* If an error occurred during request building, remove all HCI
- * commands queued on the HCI request queue.
- */
- if (req->err) {
- skb_queue_purge(&req->cmd_q);
- return req->err;
- }
-
- /* Do not allow empty requests */
- if (skb_queue_empty(&req->cmd_q))
- return -ENODATA;
-
- skb = skb_peek_tail(&req->cmd_q);
- bt_cb(skb)->req.complete = complete;
-
- spin_lock_irqsave(&hdev->cmd_q.lock, flags);
- skb_queue_splice_tail(&req->cmd_q, &hdev->cmd_q);
- spin_unlock_irqrestore(&hdev->cmd_q.lock, flags);
-
- queue_work(hdev->workqueue, &hdev->cmd_work);
-
- return 0;
-}
-
bool hci_req_pending(struct hci_dev *hdev)
{
return (hdev->req_status == HCI_REQ_PEND);
}
-static struct sk_buff *hci_prepare_cmd(struct hci_dev *hdev, u16 opcode,
- u32 plen, const void *param)
-{
- int len = HCI_COMMAND_HDR_SIZE + plen;
- struct hci_command_hdr *hdr;
- struct sk_buff *skb;
-
- skb = bt_skb_alloc(len, GFP_ATOMIC);
- if (!skb)
- return NULL;
-
- hdr = (struct hci_command_hdr *) skb_put(skb, HCI_COMMAND_HDR_SIZE);
- hdr->opcode = cpu_to_le16(opcode);
- hdr->plen = plen;
-
- if (plen)
- memcpy(skb_put(skb, plen), param, plen);
-
- BT_DBG("skb len %d", skb->len);
-
- bt_cb(skb)->pkt_type = HCI_COMMAND_PKT;
- bt_cb(skb)->opcode = opcode;
-
- return skb;
-}
-
/* Send HCI command */
int hci_send_cmd(struct hci_dev *hdev, __u16 opcode, __u32 plen,
const void *param)
return 0;
}
-/* Queue a command to an asynchronous HCI request */
-void hci_req_add_ev(struct hci_request *req, u16 opcode, u32 plen,
- const void *param, u8 event)
-{
- struct hci_dev *hdev = req->hdev;
- struct sk_buff *skb;
-
- BT_DBG("%s opcode 0x%4.4x plen %d", hdev->name, opcode, plen);
-
- /* If an error occurred during request building, there is no point in
- * queueing the HCI command. We can simply return.
- */
- if (req->err)
- return;
-
- skb = hci_prepare_cmd(hdev, opcode, plen, param);
- if (!skb) {
- BT_ERR("%s no memory for command (opcode 0x%4.4x)",
- hdev->name, opcode);
- req->err = -ENOMEM;
- return;
- }
-
- if (skb_queue_empty(&req->cmd_q))
- bt_cb(skb)->req.start = true;
-
- bt_cb(skb)->req.event = event;
-
- skb_queue_tail(&req->cmd_q, skb);
-}
-
-void hci_req_add(struct hci_request *req, u16 opcode, u32 plen,
- const void *param)
-{
- hci_req_add_ev(req, opcode, plen, param, 0);
-}
-
/* Get data from the previously sent command */
void *hci_sent_cmd_data(struct hci_dev *hdev, __u16 opcode)
{
}
}
-void hci_req_add_le_scan_disable(struct hci_request *req)
-{
- struct hci_cp_le_set_scan_enable cp;
-
- memset(&cp, 0, sizeof(cp));
- cp.enable = LE_SCAN_DISABLE;
- hci_req_add(req, HCI_OP_LE_SET_SCAN_ENABLE, sizeof(cp), &cp);
-}
-
-static void add_to_white_list(struct hci_request *req,
- struct hci_conn_params *params)
-{
- struct hci_cp_le_add_to_white_list cp;
-
- cp.bdaddr_type = params->addr_type;
- bacpy(&cp.bdaddr, ¶ms->addr);
-
- hci_req_add(req, HCI_OP_LE_ADD_TO_WHITE_LIST, sizeof(cp), &cp);
-}
-
-static u8 update_white_list(struct hci_request *req)
-{
- struct hci_dev *hdev = req->hdev;
- struct hci_conn_params *params;
- struct bdaddr_list *b;
- uint8_t white_list_entries = 0;
-
- /* Go through the current white list programmed into the
- * controller one by one and check if that address is still
- * in the list of pending connections or list of devices to
- * report. If not present in either list, then queue the
- * command to remove it from the controller.
- */
- list_for_each_entry(b, &hdev->le_white_list, list) {
- struct hci_cp_le_del_from_white_list cp;
-
- if (hci_pend_le_action_lookup(&hdev->pend_le_conns,
- &b->bdaddr, b->bdaddr_type) ||
- hci_pend_le_action_lookup(&hdev->pend_le_reports,
- &b->bdaddr, b->bdaddr_type)) {
- white_list_entries++;
- continue;
- }
-
- cp.bdaddr_type = b->bdaddr_type;
- bacpy(&cp.bdaddr, &b->bdaddr);
-
- hci_req_add(req, HCI_OP_LE_DEL_FROM_WHITE_LIST,
- sizeof(cp), &cp);
- }
-
- /* Since all no longer valid white list entries have been
- * removed, walk through the list of pending connections
- * and ensure that any new device gets programmed into
- * the controller.
- *
- * If the list of the devices is larger than the list of
- * available white list entries in the controller, then
- * just abort and return filer policy value to not use the
- * white list.
- */
- list_for_each_entry(params, &hdev->pend_le_conns, action) {
- if (hci_bdaddr_list_lookup(&hdev->le_white_list,
- ¶ms->addr, params->addr_type))
- continue;
-
- if (white_list_entries >= hdev->le_white_list_size) {
- /* Select filter policy to accept all advertising */
- return 0x00;
- }
-
- if (hci_find_irk_by_addr(hdev, ¶ms->addr,
- params->addr_type)) {
- /* White list can not be used with RPAs */
- return 0x00;
- }
-
- white_list_entries++;
- add_to_white_list(req, params);
- }
-
- /* After adding all new pending connections, walk through
- * the list of pending reports and also add these to the
- * white list if there is still space.
- */
- list_for_each_entry(params, &hdev->pend_le_reports, action) {
- if (hci_bdaddr_list_lookup(&hdev->le_white_list,
- ¶ms->addr, params->addr_type))
- continue;
-
- if (white_list_entries >= hdev->le_white_list_size) {
- /* Select filter policy to accept all advertising */
- return 0x00;
- }
-
- if (hci_find_irk_by_addr(hdev, ¶ms->addr,
- params->addr_type)) {
- /* White list can not be used with RPAs */
- return 0x00;
- }
-
- white_list_entries++;
- add_to_white_list(req, params);
- }
-
- /* Select filter policy to use white list */
- return 0x01;
-}
-
-void hci_req_add_le_passive_scan(struct hci_request *req)
-{
- struct hci_cp_le_set_scan_param param_cp;
- struct hci_cp_le_set_scan_enable enable_cp;
- struct hci_dev *hdev = req->hdev;
- u8 own_addr_type;
- u8 filter_policy;
-
- /* Set require_privacy to false since no SCAN_REQ are send
- * during passive scanning. Not using an non-resolvable address
- * here is important so that peer devices using direct
- * advertising with our address will be correctly reported
- * by the controller.
- */
- if (hci_update_random_address(req, false, &own_addr_type))
- return;
-
- /* Adding or removing entries from the white list must
- * happen before enabling scanning. The controller does
- * not allow white list modification while scanning.
- */
- filter_policy = update_white_list(req);
-
- /* When the controller is using random resolvable addresses and
- * with that having LE privacy enabled, then controllers with
- * Extended Scanner Filter Policies support can now enable support
- * for handling directed advertising.
- *
- * So instead of using filter polices 0x00 (no whitelist)
- * and 0x01 (whitelist enabled) use the new filter policies
- * 0x02 (no whitelist) and 0x03 (whitelist enabled).
- */
- if (test_bit(HCI_PRIVACY, &hdev->dev_flags) &&
- (hdev->le_features[0] & HCI_LE_EXT_SCAN_POLICY))
- filter_policy |= 0x02;
-
- memset(¶m_cp, 0, sizeof(param_cp));
- param_cp.type = LE_SCAN_PASSIVE;
- param_cp.interval = cpu_to_le16(hdev->le_scan_interval);
- param_cp.window = cpu_to_le16(hdev->le_scan_window);
- param_cp.own_address_type = own_addr_type;
- param_cp.filter_policy = filter_policy;
- hci_req_add(req, HCI_OP_LE_SET_SCAN_PARAM, sizeof(param_cp),
- ¶m_cp);
-
- memset(&enable_cp, 0, sizeof(enable_cp));
- enable_cp.enable = LE_SCAN_ENABLE;
- enable_cp.filter_dup = LE_SCAN_FILTER_DUP_ENABLE;
- hci_req_add(req, HCI_OP_LE_SET_SCAN_ENABLE, sizeof(enable_cp),
- &enable_cp);
-}
-
static void update_background_scan_complete(struct hci_dev *hdev, u8 status)
{
if (status)
#include <net/bluetooth/hci_core.h>
#include <net/bluetooth/mgmt.h>
+#include "hci_request.h"
#include "a2mp.h"
#include "amp.h"
#include "smp.h"
--- /dev/null
+/*
+ BlueZ - Bluetooth protocol stack for Linux
+
+ Copyright (C) 2014 Intel Corporation
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License version 2 as
+ published by the Free Software Foundation;
+
+ THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
+ OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OF THIRD PARTY RIGHTS.
+ IN NO EVENT SHALL THE COPYRIGHT HOLDER(S) AND AUTHOR(S) BE LIABLE FOR ANY
+ CLAIM, OR ANY SPECIAL INDIRECT OR CONSEQUENTIAL DAMAGES, OR ANY DAMAGES
+ WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+
+ ALL LIABILITY, INCLUDING LIABILITY FOR INFRINGEMENT OF ANY PATENTS,
+ COPYRIGHTS, TRADEMARKS OR OTHER RIGHTS, RELATING TO USE OF THIS
+ SOFTWARE IS DISCLAIMED.
+*/
+
+#include <net/bluetooth/bluetooth.h>
+#include <net/bluetooth/hci_core.h>
+
+#include "smp.h"
+#include "hci_request.h"
+
+void hci_req_init(struct hci_request *req, struct hci_dev *hdev)
+{
+ skb_queue_head_init(&req->cmd_q);
+ req->hdev = hdev;
+ req->err = 0;
+}
+
+int hci_req_run(struct hci_request *req, hci_req_complete_t complete)
+{
+ struct hci_dev *hdev = req->hdev;
+ struct sk_buff *skb;
+ unsigned long flags;
+
+ BT_DBG("length %u", skb_queue_len(&req->cmd_q));
+
+ /* If an error occurred during request building, remove all HCI
+ * commands queued on the HCI request queue.
+ */
+ if (req->err) {
+ skb_queue_purge(&req->cmd_q);
+ return req->err;
+ }
+
+ /* Do not allow empty requests */
+ if (skb_queue_empty(&req->cmd_q))
+ return -ENODATA;
+
+ skb = skb_peek_tail(&req->cmd_q);
+ bt_cb(skb)->req.complete = complete;
+
+ spin_lock_irqsave(&hdev->cmd_q.lock, flags);
+ skb_queue_splice_tail(&req->cmd_q, &hdev->cmd_q);
+ spin_unlock_irqrestore(&hdev->cmd_q.lock, flags);
+
+ queue_work(hdev->workqueue, &hdev->cmd_work);
+
+ return 0;
+}
+
+struct sk_buff *hci_prepare_cmd(struct hci_dev *hdev, u16 opcode, u32 plen,
+ const void *param)
+{
+ int len = HCI_COMMAND_HDR_SIZE + plen;
+ struct hci_command_hdr *hdr;
+ struct sk_buff *skb;
+
+ skb = bt_skb_alloc(len, GFP_ATOMIC);
+ if (!skb)
+ return NULL;
+
+ hdr = (struct hci_command_hdr *) skb_put(skb, HCI_COMMAND_HDR_SIZE);
+ hdr->opcode = cpu_to_le16(opcode);
+ hdr->plen = plen;
+
+ if (plen)
+ memcpy(skb_put(skb, plen), param, plen);
+
+ BT_DBG("skb len %d", skb->len);
+
+ bt_cb(skb)->pkt_type = HCI_COMMAND_PKT;
+ bt_cb(skb)->opcode = opcode;
+
+ return skb;
+}
+
+/* Queue a command to an asynchronous HCI request */
+void hci_req_add_ev(struct hci_request *req, u16 opcode, u32 plen,
+ const void *param, u8 event)
+{
+ struct hci_dev *hdev = req->hdev;
+ struct sk_buff *skb;
+
+ BT_DBG("%s opcode 0x%4.4x plen %d", hdev->name, opcode, plen);
+
+ /* If an error occurred during request building, there is no point in
+ * queueing the HCI command. We can simply return.
+ */
+ if (req->err)
+ return;
+
+ skb = hci_prepare_cmd(hdev, opcode, plen, param);
+ if (!skb) {
+ BT_ERR("%s no memory for command (opcode 0x%4.4x)",
+ hdev->name, opcode);
+ req->err = -ENOMEM;
+ return;
+ }
+
+ if (skb_queue_empty(&req->cmd_q))
+ bt_cb(skb)->req.start = true;
+
+ bt_cb(skb)->req.event = event;
+
+ skb_queue_tail(&req->cmd_q, skb);
+}
+
+void hci_req_add(struct hci_request *req, u16 opcode, u32 plen,
+ const void *param)
+{
+ hci_req_add_ev(req, opcode, plen, param, 0);
+}
+
+void hci_req_add_le_scan_disable(struct hci_request *req)
+{
+ struct hci_cp_le_set_scan_enable cp;
+
+ memset(&cp, 0, sizeof(cp));
+ cp.enable = LE_SCAN_DISABLE;
+ hci_req_add(req, HCI_OP_LE_SET_SCAN_ENABLE, sizeof(cp), &cp);
+}
+
+static void add_to_white_list(struct hci_request *req,
+ struct hci_conn_params *params)
+{
+ struct hci_cp_le_add_to_white_list cp;
+
+ cp.bdaddr_type = params->addr_type;
+ bacpy(&cp.bdaddr, ¶ms->addr);
+
+ hci_req_add(req, HCI_OP_LE_ADD_TO_WHITE_LIST, sizeof(cp), &cp);
+}
+
+static u8 update_white_list(struct hci_request *req)
+{
+ struct hci_dev *hdev = req->hdev;
+ struct hci_conn_params *params;
+ struct bdaddr_list *b;
+ uint8_t white_list_entries = 0;
+
+ /* Go through the current white list programmed into the
+ * controller one by one and check if that address is still
+ * in the list of pending connections or list of devices to
+ * report. If not present in either list, then queue the
+ * command to remove it from the controller.
+ */
+ list_for_each_entry(b, &hdev->le_white_list, list) {
+ struct hci_cp_le_del_from_white_list cp;
+
+ if (hci_pend_le_action_lookup(&hdev->pend_le_conns,
+ &b->bdaddr, b->bdaddr_type) ||
+ hci_pend_le_action_lookup(&hdev->pend_le_reports,
+ &b->bdaddr, b->bdaddr_type)) {
+ white_list_entries++;
+ continue;
+ }
+
+ cp.bdaddr_type = b->bdaddr_type;
+ bacpy(&cp.bdaddr, &b->bdaddr);
+
+ hci_req_add(req, HCI_OP_LE_DEL_FROM_WHITE_LIST,
+ sizeof(cp), &cp);
+ }
+
+ /* Since all no longer valid white list entries have been
+ * removed, walk through the list of pending connections
+ * and ensure that any new device gets programmed into
+ * the controller.
+ *
+ * If the list of the devices is larger than the list of
+ * available white list entries in the controller, then
+ * just abort and return filer policy value to not use the
+ * white list.
+ */
+ list_for_each_entry(params, &hdev->pend_le_conns, action) {
+ if (hci_bdaddr_list_lookup(&hdev->le_white_list,
+ ¶ms->addr, params->addr_type))
+ continue;
+
+ if (white_list_entries >= hdev->le_white_list_size) {
+ /* Select filter policy to accept all advertising */
+ return 0x00;
+ }
+
+ if (hci_find_irk_by_addr(hdev, ¶ms->addr,
+ params->addr_type)) {
+ /* White list can not be used with RPAs */
+ return 0x00;
+ }
+
+ white_list_entries++;
+ add_to_white_list(req, params);
+ }
+
+ /* After adding all new pending connections, walk through
+ * the list of pending reports and also add these to the
+ * white list if there is still space.
+ */
+ list_for_each_entry(params, &hdev->pend_le_reports, action) {
+ if (hci_bdaddr_list_lookup(&hdev->le_white_list,
+ ¶ms->addr, params->addr_type))
+ continue;
+
+ if (white_list_entries >= hdev->le_white_list_size) {
+ /* Select filter policy to accept all advertising */
+ return 0x00;
+ }
+
+ if (hci_find_irk_by_addr(hdev, ¶ms->addr,
+ params->addr_type)) {
+ /* White list can not be used with RPAs */
+ return 0x00;
+ }
+
+ white_list_entries++;
+ add_to_white_list(req, params);
+ }
+
+ /* Select filter policy to use white list */
+ return 0x01;
+}
+
+void hci_req_add_le_passive_scan(struct hci_request *req)
+{
+ struct hci_cp_le_set_scan_param param_cp;
+ struct hci_cp_le_set_scan_enable enable_cp;
+ struct hci_dev *hdev = req->hdev;
+ u8 own_addr_type;
+ u8 filter_policy;
+
+ /* Set require_privacy to false since no SCAN_REQ are send
+ * during passive scanning. Not using an non-resolvable address
+ * here is important so that peer devices using direct
+ * advertising with our address will be correctly reported
+ * by the controller.
+ */
+ if (hci_update_random_address(req, false, &own_addr_type))
+ return;
+
+ /* Adding or removing entries from the white list must
+ * happen before enabling scanning. The controller does
+ * not allow white list modification while scanning.
+ */
+ filter_policy = update_white_list(req);
+
+ /* When the controller is using random resolvable addresses and
+ * with that having LE privacy enabled, then controllers with
+ * Extended Scanner Filter Policies support can now enable support
+ * for handling directed advertising.
+ *
+ * So instead of using filter polices 0x00 (no whitelist)
+ * and 0x01 (whitelist enabled) use the new filter policies
+ * 0x02 (no whitelist) and 0x03 (whitelist enabled).
+ */
+ if (test_bit(HCI_PRIVACY, &hdev->dev_flags) &&
+ (hdev->le_features[0] & HCI_LE_EXT_SCAN_POLICY))
+ filter_policy |= 0x02;
+
+ memset(¶m_cp, 0, sizeof(param_cp));
+ param_cp.type = LE_SCAN_PASSIVE;
+ param_cp.interval = cpu_to_le16(hdev->le_scan_interval);
+ param_cp.window = cpu_to_le16(hdev->le_scan_window);
+ param_cp.own_address_type = own_addr_type;
+ param_cp.filter_policy = filter_policy;
+ hci_req_add(req, HCI_OP_LE_SET_SCAN_PARAM, sizeof(param_cp),
+ ¶m_cp);
+
+ memset(&enable_cp, 0, sizeof(enable_cp));
+ enable_cp.enable = LE_SCAN_ENABLE;
+ enable_cp.filter_dup = LE_SCAN_FILTER_DUP_ENABLE;
+ hci_req_add(req, HCI_OP_LE_SET_SCAN_ENABLE, sizeof(enable_cp),
+ &enable_cp);
+}
+
+static void set_random_addr(struct hci_request *req, bdaddr_t *rpa)
+{
+ struct hci_dev *hdev = req->hdev;
+
+ /* If we're advertising or initiating an LE connection we can't
+ * go ahead and change the random address at this time. This is
+ * because the eventual initiator address used for the
+ * subsequently created connection will be undefined (some
+ * controllers use the new address and others the one we had
+ * when the operation started).
+ *
+ * In this kind of scenario skip the update and let the random
+ * address be updated at the next cycle.
+ */
+ if (test_bit(HCI_LE_ADV, &hdev->dev_flags) ||
+ hci_conn_hash_lookup_state(hdev, LE_LINK, BT_CONNECT)) {
+ BT_DBG("Deferring random address update");
+ set_bit(HCI_RPA_EXPIRED, &hdev->dev_flags);
+ return;
+ }
+
+ hci_req_add(req, HCI_OP_LE_SET_RANDOM_ADDR, 6, rpa);
+}
+
+int hci_update_random_address(struct hci_request *req, bool require_privacy,
+ u8 *own_addr_type)
+{
+ struct hci_dev *hdev = req->hdev;
+ int err;
+
+ /* If privacy is enabled use a resolvable private address. If
+ * current RPA has expired or there is something else than
+ * the current RPA in use, then generate a new one.
+ */
+ if (test_bit(HCI_PRIVACY, &hdev->dev_flags)) {
+ int to;
+
+ *own_addr_type = ADDR_LE_DEV_RANDOM;
+
+ if (!test_and_clear_bit(HCI_RPA_EXPIRED, &hdev->dev_flags) &&
+ !bacmp(&hdev->random_addr, &hdev->rpa))
+ return 0;
+
+ err = smp_generate_rpa(hdev, hdev->irk, &hdev->rpa);
+ if (err < 0) {
+ BT_ERR("%s failed to generate new RPA", hdev->name);
+ return err;
+ }
+
+ set_random_addr(req, &hdev->rpa);
+
+ to = msecs_to_jiffies(hdev->rpa_timeout * 1000);
+ queue_delayed_work(hdev->workqueue, &hdev->rpa_expired, to);
+
+ return 0;
+ }
+
+ /* In case of required privacy without resolvable private address,
+ * use an non-resolvable private address. This is useful for active
+ * scanning and non-connectable advertising.
+ */
+ if (require_privacy) {
+ bdaddr_t nrpa;
+
+ while (true) {
+ /* The non-resolvable private address is generated
+ * from random six bytes with the two most significant
+ * bits cleared.
+ */
+ get_random_bytes(&nrpa, 6);
+ nrpa.b[5] &= 0x3f;
+
+ /* The non-resolvable private address shall not be
+ * equal to the public address.
+ */
+ if (bacmp(&hdev->bdaddr, &nrpa))
+ break;
+ }
+
+ *own_addr_type = ADDR_LE_DEV_RANDOM;
+ set_random_addr(req, &nrpa);
+ return 0;
+ }
+
+ /* If forcing static address is in use or there is no public
+ * address use the static address as random address (but skip
+ * the HCI command if the current random address is already the
+ * static one.
+ */
+ if (test_bit(HCI_FORCE_STATIC_ADDR, &hdev->dbg_flags) ||
+ !bacmp(&hdev->bdaddr, BDADDR_ANY)) {
+ *own_addr_type = ADDR_LE_DEV_RANDOM;
+ if (bacmp(&hdev->static_addr, &hdev->random_addr))
+ hci_req_add(req, HCI_OP_LE_SET_RANDOM_ADDR, 6,
+ &hdev->static_addr);
+ return 0;
+ }
+
+ /* Neither privacy nor static address is being used so use a
+ * public address.
+ */
+ *own_addr_type = ADDR_LE_DEV_PUBLIC;
+
+ return 0;
+}
--- /dev/null
+/*
+ BlueZ - Bluetooth protocol stack for Linux
+ Copyright (C) 2014 Intel Corporation
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License version 2 as
+ published by the Free Software Foundation;
+
+ THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
+ OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OF THIRD PARTY RIGHTS.
+ IN NO EVENT SHALL THE COPYRIGHT HOLDER(S) AND AUTHOR(S) BE LIABLE FOR ANY
+ CLAIM, OR ANY SPECIAL INDIRECT OR CONSEQUENTIAL DAMAGES, OR ANY DAMAGES
+ WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+
+ ALL LIABILITY, INCLUDING LIABILITY FOR INFRINGEMENT OF ANY PATENTS,
+ COPYRIGHTS, TRADEMARKS OR OTHER RIGHTS, RELATING TO USE OF THIS
+ SOFTWARE IS DISCLAIMED.
+*/
+
+struct hci_request {
+ struct hci_dev *hdev;
+ struct sk_buff_head cmd_q;
+
+ /* If something goes wrong when building the HCI request, the error
+ * value is stored in this field.
+ */
+ int err;
+};
+
+void hci_req_init(struct hci_request *req, struct hci_dev *hdev);
+int hci_req_run(struct hci_request *req, hci_req_complete_t complete);
+void hci_req_add(struct hci_request *req, u16 opcode, u32 plen,
+ const void *param);
+void hci_req_add_ev(struct hci_request *req, u16 opcode, u32 plen,
+ const void *param, u8 event);
+void hci_req_cmd_complete(struct hci_dev *hdev, u16 opcode, u8 status);
+
+struct sk_buff *hci_prepare_cmd(struct hci_dev *hdev, u16 opcode, u32 plen,
+ const void *param);
+
+void hci_req_add_le_scan_disable(struct hci_request *req);
+void hci_req_add_le_passive_scan(struct hci_request *req);
+
+void hci_update_page_scan(struct hci_dev *hdev);
+void __hci_update_page_scan(struct hci_request *req);
+
+int hci_update_random_address(struct hci_request *req, bool require_privacy,
+ u8 *own_addr_type);
#include <net/bluetooth/l2cap.h>
#include <net/bluetooth/mgmt.h>
+#include "hci_request.h"
#include "smp.h"
#define MGMT_VERSION 1
projects / platform / kernel / linux-rpi.git / commitdiff