md/raid10: change printk() to pr_*()
authorNeilBrown <neilb@suse.com>
Wed, 2 Nov 2016 03:16:50 +0000 (14:16 +1100)
committerShaohua Li <shli@fb.com>
Mon, 7 Nov 2016 23:08:22 +0000 (15:08 -0800)
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Shaohua Li <shli@fb.com>
drivers/md/raid10.c

index 39fddda..25e3fd7 100644 (file)
@@ -404,8 +404,7 @@ static void raid10_end_read_request(struct bio *bio)
                 * oops, read error - keep the refcount on the rdev
                 */
                char b[BDEVNAME_SIZE];
-               printk_ratelimited(KERN_ERR
-                                  "md/raid10:%s: %s: rescheduling sector %llu\n",
+               pr_err_ratelimited("md/raid10:%s: %s: rescheduling sector %llu\n",
                                   mdname(conf->mddev),
                                   bdevname(rdev->bdev, b),
                                   (unsigned long long)r10_bio->sector);
@@ -1589,11 +1588,10 @@ static void raid10_error(struct mddev *mddev, struct md_rdev *rdev)
        set_mask_bits(&mddev->flags, 0,
                      BIT(MD_CHANGE_DEVS) | BIT(MD_CHANGE_PENDING));
        spin_unlock_irqrestore(&conf->device_lock, flags);
-       printk(KERN_ALERT
-              "md/raid10:%s: Disk failure on %s, disabling device.\n"
-              "md/raid10:%s: Operation continuing on %d devices.\n",
-              mdname(mddev), bdevname(rdev->bdev, b),
-              mdname(mddev), conf->geo.raid_disks - mddev->degraded);
+       pr_crit("md/raid10:%s: Disk failure on %s, disabling device.\n"
+               "md/raid10:%s: Operation continuing on %d devices.\n",
+               mdname(mddev), bdevname(rdev->bdev, b),
+               mdname(mddev), conf->geo.raid_disks - mddev->degraded);
 }
 
 static void print_conf(struct r10conf *conf)
@@ -1601,13 +1599,13 @@ static void print_conf(struct r10conf *conf)
        int i;
        struct md_rdev *rdev;
 
-       printk(KERN_DEBUG "RAID10 conf printout:\n");
+       pr_debug("RAID10 conf printout:\n");
        if (!conf) {
-               printk(KERN_DEBUG "(!conf)\n");
+               pr_debug("(!conf)\n");
                return;
        }
-       printk(KERN_DEBUG " --- wd:%d rd:%d\n", conf->geo.raid_disks - conf->mddev->degraded,
-               conf->geo.raid_disks);
+       pr_debug(" --- wd:%d rd:%d\n", conf->geo.raid_disks - conf->mddev->degraded,
+                conf->geo.raid_disks);
 
        /* This is only called with ->reconfix_mutex held, so
         * rcu protection of rdev is not needed */
@@ -1615,10 +1613,10 @@ static void print_conf(struct r10conf *conf)
                char b[BDEVNAME_SIZE];
                rdev = conf->mirrors[i].rdev;
                if (rdev)
-                       printk(KERN_DEBUG " disk %d, wo:%d, o:%d, dev:%s\n",
-                               i, !test_bit(In_sync, &rdev->flags),
-                               !test_bit(Faulty, &rdev->flags),
-                               bdevname(rdev->bdev,b));
+                       pr_debug(" disk %d, wo:%d, o:%d, dev:%s\n",
+                                i, !test_bit(In_sync, &rdev->flags),
+                                !test_bit(Faulty, &rdev->flags),
+                                bdevname(rdev->bdev,b));
        }
 }
 
@@ -2109,10 +2107,8 @@ static void fix_recovery_read_error(struct r10bio *r10_bio)
                                ok = rdev_set_badblocks(rdev2, addr, s, 0);
                                if (!ok) {
                                        /* just abort the recovery */
-                                       printk(KERN_NOTICE
-                                              "md/raid10:%s: recovery aborted"
-                                              " due to read error\n",
-                                              mdname(mddev));
+                                       pr_notice("md/raid10:%s: recovery aborted due to read error\n",
+                                                 mdname(mddev));
 
                                        conf->mirrors[dw].recovery_disabled
                                                = mddev->recovery_disabled;
@@ -2259,14 +2255,11 @@ static void fix_read_error(struct r10conf *conf, struct mddev *mddev, struct r10
                char b[BDEVNAME_SIZE];
                bdevname(rdev->bdev, b);
 
-               printk(KERN_NOTICE
-                      "md/raid10:%s: %s: Raid device exceeded "
-                      "read_error threshold [cur %d:max %d]\n",
-                      mdname(mddev), b,
-                      atomic_read(&rdev->read_errors), max_read_errors);
-               printk(KERN_NOTICE
-                      "md/raid10:%s: %s: Failing raid device\n",
-                      mdname(mddev), b);
+               pr_notice("md/raid10:%s: %s: Raid device exceeded read_error threshold [cur %d:max %d]\n",
+                         mdname(mddev), b,
+                         atomic_read(&rdev->read_errors), max_read_errors);
+               pr_notice("md/raid10:%s: %s: Failing raid device\n",
+                         mdname(mddev), b);
                md_error(mddev, rdev);
                r10_bio->devs[r10_bio->read_slot].bio = IO_BLOCKED;
                return;
@@ -2356,20 +2349,16 @@ static void fix_read_error(struct r10conf *conf, struct mddev *mddev, struct r10
                                             s, conf->tmppage, WRITE)
                            == 0) {
                                /* Well, this device is dead */
-                               printk(KERN_NOTICE
-                                      "md/raid10:%s: read correction "
-                                      "write failed"
-                                      " (%d sectors at %llu on %s)\n",
-                                      mdname(mddev), s,
-                                      (unsigned long long)(
-                                              sect +
-                                              choose_data_offset(r10_bio,
-                                                                 rdev)),
-                                      bdevname(rdev->bdev, b));
-                               printk(KERN_NOTICE "md/raid10:%s: %s: failing "
-                                      "drive\n",
-                                      mdname(mddev),
-                                      bdevname(rdev->bdev, b));
+                               pr_notice("md/raid10:%s: read correction write failed (%d sectors at %llu on %s)\n",
+                                         mdname(mddev), s,
+                                         (unsigned long long)(
+                                                 sect +
+                                                 choose_data_offset(r10_bio,
+                                                                    rdev)),
+                                         bdevname(rdev->bdev, b));
+                               pr_notice("md/raid10:%s: %s: failing drive\n",
+                                         mdname(mddev),
+                                         bdevname(rdev->bdev, b));
                        }
                        rdev_dec_pending(rdev, mddev);
                        rcu_read_lock();
@@ -2397,24 +2386,18 @@ static void fix_read_error(struct r10conf *conf, struct mddev *mddev, struct r10
                                                 READ)) {
                        case 0:
                                /* Well, this device is dead */
-                               printk(KERN_NOTICE
-                                      "md/raid10:%s: unable to read back "
-                                      "corrected sectors"
-                                      " (%d sectors at %llu on %s)\n",
+                               pr_notice("md/raid10:%s: unable to read back corrected sectors (%d sectors at %llu on %s)\n",
                                       mdname(mddev), s,
                                       (unsigned long long)(
                                               sect +
                                               choose_data_offset(r10_bio, rdev)),
                                       bdevname(rdev->bdev, b));
-                               printk(KERN_NOTICE "md/raid10:%s: %s: failing "
-                                      "drive\n",
+                               pr_notice("md/raid10:%s: %s: failing drive\n",
                                       mdname(mddev),
                                       bdevname(rdev->bdev, b));
                                break;
                        case 1:
-                               printk(KERN_INFO
-                                      "md/raid10:%s: read error corrected"
-                                      " (%d sectors at %llu on %s)\n",
+                               pr_info("md/raid10:%s: read error corrected (%d sectors at %llu on %s)\n",
                                       mdname(mddev), s,
                                       (unsigned long long)(
                                               sect +
@@ -2529,23 +2512,19 @@ static void handle_read_error(struct mddev *mddev, struct r10bio *r10_bio)
 read_more:
        rdev = read_balance(conf, r10_bio, &max_sectors);
        if (rdev == NULL) {
-               printk(KERN_ALERT "md/raid10:%s: %s: unrecoverable I/O"
-                      " read error for block %llu\n",
-                      mdname(mddev), b,
-                      (unsigned long long)r10_bio->sector);
+               pr_crit_ratelimited("md/raid10:%s: %s: unrecoverable I/O read error for block %llu\n",
+                                   mdname(mddev), b,
+                                   (unsigned long long)r10_bio->sector);
                raid_end_bio_io(r10_bio);
                return;
        }
 
        do_sync = (r10_bio->master_bio->bi_opf & REQ_SYNC);
        slot = r10_bio->read_slot;
-       printk_ratelimited(
-               KERN_ERR
-               "md/raid10:%s: %s: redirecting "
-               "sector %llu to another mirror\n",
-               mdname(mddev),
-               bdevname(rdev->bdev, b),
-               (unsigned long long)r10_bio->sector);
+       pr_err_ratelimited("md/raid10:%s: %s: redirecting sector %llu to another mirror\n",
+                          mdname(mddev),
+                          bdevname(rdev->bdev, b),
+                          (unsigned long long)r10_bio->sector);
        bio = bio_clone_mddev(r10_bio->master_bio,
                              GFP_NOIO, mddev);
        bio_trim(bio, r10_bio->sector - bio->bi_iter.bi_sector, max_sectors);
@@ -3160,8 +3139,7 @@ static sector_t raid10_sync_request(struct mddev *mddev, sector_t sector_nr,
                                if (!any_working)  {
                                        if (!test_and_set_bit(MD_RECOVERY_INTR,
                                                              &mddev->recovery))
-                                               printk(KERN_INFO "md/raid10:%s: insufficient "
-                                                      "working devices for recovery.\n",
+                                               pr_warn("md/raid10:%s: insufficient working devices for recovery.\n",
                                                       mdname(mddev));
                                        mirror->recovery_disabled
                                                = mddev->recovery_disabled;
@@ -3489,15 +3467,14 @@ static struct r10conf *setup_conf(struct mddev *mddev)
        copies = setup_geo(&geo, mddev, geo_new);
 
        if (copies == -2) {
-               printk(KERN_ERR "md/raid10:%s: chunk size must be "
-                      "at least PAGE_SIZE(%ld) and be a power of 2.\n",
-                      mdname(mddev), PAGE_SIZE);
+               pr_warn("md/raid10:%s: chunk size must be at least PAGE_SIZE(%ld) and be a power of 2.\n",
+                       mdname(mddev), PAGE_SIZE);
                goto out;
        }
 
        if (copies < 2 || copies > mddev->raid_disks) {
-               printk(KERN_ERR "md/raid10:%s: unsupported raid10 layout: 0x%8x\n",
-                      mdname(mddev), mddev->new_layout);
+               pr_warn("md/raid10:%s: unsupported raid10 layout: 0x%8x\n",
+                       mdname(mddev), mddev->new_layout);
                goto out;
        }
 
@@ -3557,9 +3534,6 @@ static struct r10conf *setup_conf(struct mddev *mddev)
        return conf;
 
  out:
-       if (err == -ENOMEM)
-               printk(KERN_ERR "md/raid10:%s: couldn't allocate memory.\n",
-                      mdname(mddev));
        if (conf) {
                mempool_destroy(conf->r10bio_pool);
                kfree(conf->mirrors);
@@ -3656,7 +3630,7 @@ static int raid10_run(struct mddev *mddev)
        }
        /* need to check that every block has at least one working mirror */
        if (!enough(conf, -1)) {
-               printk(KERN_ERR "md/raid10:%s: not enough operational mirrors.\n",
+               pr_err("md/raid10:%s: not enough operational mirrors.\n",
                       mdname(mddev));
                goto out_free_conf;
        }
@@ -3698,11 +3672,9 @@ static int raid10_run(struct mddev *mddev)
        }
 
        if (mddev->recovery_cp != MaxSector)
-               printk(KERN_NOTICE "md/raid10:%s: not clean"
-                      " -- starting background reconstruction\n",
-                      mdname(mddev));
-       printk(KERN_INFO
-               "md/raid10:%s: active with %d out of %d devices\n",
+               pr_notice("md/raid10:%s: not clean -- starting background reconstruction\n",
+                         mdname(mddev));
+       pr_info("md/raid10:%s: active with %d out of %d devices\n",
                mdname(mddev), conf->geo.raid_disks - mddev->degraded,
                conf->geo.raid_disks);
        /*
@@ -3739,7 +3711,7 @@ static int raid10_run(struct mddev *mddev)
 
                if (max(before_length, after_length) > min_offset_diff) {
                        /* This cannot work */
-                       printk("md/raid10: offset difference not enough to continue reshape\n");
+                       pr_warn("md/raid10: offset difference not enough to continue reshape\n");
                        goto out_free_conf;
                }
                conf->offset_diff = min_offset_diff;
@@ -3846,8 +3818,8 @@ static void *raid10_takeover_raid0(struct mddev *mddev, sector_t size, int devs)
        struct r10conf *conf;
 
        if (mddev->degraded > 0) {
-               printk(KERN_ERR "md/raid10:%s: Error: degraded raid0!\n",
-                      mdname(mddev));
+               pr_warn("md/raid10:%s: Error: degraded raid0!\n",
+                       mdname(mddev));
                return ERR_PTR(-EINVAL);
        }
        sector_div(size, devs);
@@ -3887,9 +3859,8 @@ static void *raid10_takeover(struct mddev *mddev)
                /* for raid0 takeover only one zone is supported */
                raid0_conf = mddev->private;
                if (raid0_conf->nr_strip_zones > 1) {
-                       printk(KERN_ERR "md/raid10:%s: cannot takeover raid 0"
-                              " with more than one zone.\n",
-                              mdname(mddev));
+                       pr_warn("md/raid10:%s: cannot takeover raid 0 with more than one zone.\n",
+                               mdname(mddev));
                        return ERR_PTR(-EINVAL);
                }
                return raid10_takeover_raid0(mddev,
@@ -4078,8 +4049,8 @@ static int raid10_start_reshape(struct mddev *mddev)
                sector_t size = raid10_size(mddev, 0, 0);
                if (size < mddev->array_sectors) {
                        spin_unlock_irq(&conf->device_lock);
-                       printk(KERN_ERR "md/raid10:%s: array size must be reduce before number of disks\n",
-                              mdname(mddev));
+                       pr_warn("md/raid10:%s: array size must be reduce before number of disks\n",
+                               mdname(mddev));
                        return -EINVAL;
                }
                mddev->resync_max_sectors = size;