* mips.h (INSN_*): Changed values. Removed unused definitions.

	Added INSN_COND_BRANCH_LIKELY, INSN_ISA2 and INSN_ISA3.  Split
	INSN_LOAD_DELAY into INSN_LOAD_MEMORY_DELAY and
	INSN_LOAD_COPROC_DELAY.  Split INSN_COPROC_DELAY into
	INSN_COPROC_MOVE_DELAY and INSN_COPROC_MEMORY_DELAY.
	(M_*): Added new values for r6000 and r4000 macros.
	(ANY_DELAY): Removed.

diff --git a/include/opcode/ChangeLog b/include/opcode/ChangeLog
index 1208680..57bc1cb 100644 (file)
--- a/include/opcode/ChangeLog
+++ b/include/opcode/ChangeLog
@@ -1,3 +1,13 @@
+Thu Aug 19 15:08:37 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
+
+       * mips.h (INSN_*): Changed values.  Removed unused definitions.
+       Added INSN_COND_BRANCH_LIKELY, INSN_ISA2 and INSN_ISA3.  Split
+       INSN_LOAD_DELAY into INSN_LOAD_MEMORY_DELAY and
+       INSN_LOAD_COPROC_DELAY.  Split INSN_COPROC_DELAY into
+       INSN_COPROC_MOVE_DELAY and INSN_COPROC_MEMORY_DELAY.
+       (M_*): Added new values for r6000 and r4000 macros.
+       (ANY_DELAY): Removed.
+
 Wed Aug 18 15:37:48 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
 
        * mips.h: Added M_LI_S and M_LI_SS.

diff --git a/include/opcode/mips.h b/include/opcode/mips.h
index 948c308..e746d75 100644 (file)
--- a/include/opcode/mips.h
+++ b/include/opcode/mips.h
@@ -95,7 +95,9 @@ struct mips_opcode
   const char *args;
   /* The basic opcode for the instruction.  When assembling, this
      opcode is modified by the arguments to produce the actual opcode
-     that is used.  */
+     that is used.  If pinfo is INSN_MACRO, then this is instead the
+     ISA level of the macro (0 or 1 is always supported, 2 is ISA 2,
+     etc.).  */
   unsigned long match;
   /* If pinfo is not INSN_MACRO, then this is a bit mask for the
      relevant portions of the opcode when disassembling.  If the
@@ -134,6 +136,7 @@ struct mips_opcode
    "w" 5 bit same register used as both target and destination (OP_*_RT)
    "C" 25 bit coprocessor function code (OP_*_COPZ)
    "B" 20 bit syscall function code (OP_*_SYSCALL)
+   "x" accept and ignore register name
 
    Floating point instructions:
    "D" 5 bit destination register (OP_*_FD)
@@ -160,62 +163,62 @@ struct mips_opcode
 
 /* Modifies the general purpose register in OP_*_RD.  */
 #define INSN_WRITE_GPR_D            0x00000001
-/* Modifies the general purpose register in OP_*_RS (FIXME: not used).  */
-#define INSN_WRITE_GPR_S            0x00000002
 /* Modifies the general purpose register in OP_*_RT.  */
-#define INSN_WRITE_GPR_T            0x00000004
+#define INSN_WRITE_GPR_T            0x00000002
 /* Modifies general purpose register 31.  */
-#define INSN_WRITE_GPR_31           0x00000008
+#define INSN_WRITE_GPR_31           0x00000004
 /* Modifies the floating point register in OP_*_FD.  */
-#define INSN_WRITE_FPR_D            0x00000010
-/* Modifies the floating point register in OP_*_FS (FIXME: not used).  */
-#define INSN_WRITE_FPR_S            0x00000020
+#define INSN_WRITE_FPR_D            0x00000008
+/* Modifies the floating point register in OP_*_FS.  */
+#define INSN_WRITE_FPR_S            0x00000010
 /* Modifies the floating point register in OP_*_FT.  */
-#define INSN_WRITE_FPR_T            0x00000040
-/* Reads the general purpose register in OP_*_RD (FIXME: not used).  */
-#define INSN_READ_GPR_D             0x00000080
+#define INSN_WRITE_FPR_T            0x00000020
 /* Reads the general purpose register in OP_*_RS.  */
-#define INSN_READ_GPR_S             0x00000100
+#define INSN_READ_GPR_S             0x00000040
 /* Reads the general purpose register in OP_*_RT.  */
-#define INSN_READ_GPR_T             0x00000200
-/* Reads general purpose register 31 (FIXME: not used).  */
-#define INSN_READ_GPR_31            0x00000400
-/* Reads the floating point register in OP_*_FD (FIXME: not used).  */
-#define INSN_READ_FPR_D             0x00000800
+#define INSN_READ_GPR_T             0x00000080
 /* Reads the floating point register in OP_*_FS.  */
-#define INSN_READ_FPR_S             0x00001000
+#define INSN_READ_FPR_S             0x00000100
 /* Reads the floating point register in OP_*_FT.  */
-#define INSN_READ_FPR_T             0x00002000
+#define INSN_READ_FPR_T             0x00000200
 /* Modifies coprocessor condition code.  */
-#define INSN_WRITE_COND_CODE        0x00004000
+#define INSN_WRITE_COND_CODE        0x00000400
 /* Reads coprocessor condition code.  */
-#define INSN_READ_COND_CODE         0x00008000
+#define INSN_READ_COND_CODE         0x00000800
 /* TLB operation.  */
-#define INSN_TLB                    0x00010000
+#define INSN_TLB                    0x00001000
 /* RFE (return from exception) instruction.  */
-#define INSN_RFE                    0x00020000
+#define INSN_RFE                    0x00002000
 /* Reads coprocessor register other than floating point register.  */
-#define INSN_COP                    0x00040000
-/* Instruction destination requires load delay.  */
-#define INSN_LOAD_DELAY             0x00080000
+#define INSN_COP                    0x00004000
+/* Instruction loads value from memory, requiring delay.  */
+#define INSN_LOAD_MEMORY_DELAY      0x00008000
+/* Instruction loads value from coprocessor, requiring delay.  */
+#define INSN_LOAD_COPROC_DELAY     0x00010000
 /* Instruction has unconditional branch delay slot.  */
-#define INSN_UNCOND_BRANCH_DELAY    0x00100000
+#define INSN_UNCOND_BRANCH_DELAY    0x00020000
 /* Instruction has conditional branch delay slot.  */
-#define INSN_COND_BRANCH_DELAY      0x00200000
-/* Writes coprocessor register, requiring delay.  */
-#define INSN_COPROC_DELAY           0x00400000
+#define INSN_COND_BRANCH_DELAY      0x00040000
+/* Conditional branch likely: if branch not taken, insn nullified.  */
+#define INSN_COND_BRANCH_LIKELY            0x00080000
+/* Moves to coprocessor register, requiring delay.  */
+#define INSN_COPROC_MOVE_DELAY      0x00100000
+/* Loads coprocessor register from memory, requiring delay.  */
+#define INSN_COPROC_MEMORY_DELAY    0x00200000
 /* Reads the HI register.  */
-#define INSN_READ_HI               0x00800000
+#define INSN_READ_HI               0x00400000
 /* Reads the LO register.  */
-#define INSN_READ_LO               0x01000000
+#define INSN_READ_LO               0x00800000
 /* Modifies the HI register.  */
-#define INSN_WRITE_HI              0x02000000
+#define INSN_WRITE_HI              0x01000000
 /* Modifies the LO register.  */
-#define INSN_WRITE_LO              0x04000000
+#define INSN_WRITE_LO              0x02000000
 /* Takes a trap (FIXME: why is this interesting?).  */
-#define INSN_TRAP                   0x08000000
-/* R4000 instruction.  */
-#define INSN_R4000                 0x80000000
+#define INSN_TRAP                   0x04000000
+/* MIPS ISA 2 instruction (R6000 or R4000).  */
+#define INSN_ISA2                  0x10000000
+/* MIPS ISA 3 instruction (R4000).  */
+#define INSN_ISA3                  0x20000000
 
 /* Instruction is actually a macro.  It should be ignored by the
    disassembler, and requires special treatment by the assembler.  */
@@ -236,27 +239,63 @@ enum {
     M_ADDU_I,
     M_AND_I,
     M_BEQ_I,
+    M_BEQL_I,
     M_BGE,
+    M_BGEL,
     M_BGE_I,
+    M_BGEL_I,
     M_BGEU,
+    M_BGEUL,
     M_BGEU_I,
+    M_BGEUL_I,
     M_BGT,
+    M_BGTL,
     M_BGT_I,
+    M_BGTL_I,
     M_BGTU,
+    M_BGTUL,
     M_BGTU_I,
+    M_BGTUL_I,
     M_BLE,
+    M_BLEL,
     M_BLE_I,
+    M_BLEL_I,
     M_BLEU,
+    M_BLEUL,
     M_BLEU_I,
+    M_BLEUL_I,
     M_BLT,
+    M_BLTL,
     M_BLT_I,
+    M_BLTL_I,
     M_BLTU,
+    M_BLTUL,
     M_BLTU_I,
+    M_BLTUL_I,
     M_BNE_I,
+    M_BNEL_I,
+    M_DADD_I,
+    M_DADDU_I,
+    M_DDIV_3,
+    M_DDIV_3I,
+    M_DDIVU_3,
+    M_DDIVU_3I,
     M_DIV_3,
     M_DIV_3I,
     M_DIVU_3,
     M_DIVU_3I,
+    M_DMUL,
+    M_DMUL_I, 
+    M_DMULO,
+    M_DMULO_I, 
+    M_DMULOU,
+    M_DMULOU_I, 
+    M_DREM_3,
+    M_DREM_3I,
+    M_DREMU_3,
+    M_DREMU_3I,
+    M_DSUB_I,
+    M_DSUBU_I,
     M_L_DOB,
     M_L_DAB,
     M_LA,
@@ -268,6 +307,11 @@ enum {
     M_LD_A,
     M_LD_OB,
     M_LD_AB,
+    M_LDC1_AB,
+    M_LDC2_AB,
+    M_LDC3_AB,
+    M_LDL_AB,
+    M_LDR_AB,
     M_LH_A,
     M_LH_AB,
     M_LHU_A,
@@ -277,6 +321,8 @@ enum {
     M_LI_DD,
     M_LI_S,
     M_LI_SS,
+    M_LL_AB,
+    M_LLD_AB,
     M_LS_A,
     M_LW_A,
     M_LW_AB,
@@ -292,6 +338,7 @@ enum {
     M_LWL_AB,
     M_LWR_A,
     M_LWR_AB,
+    M_LWU_AB,
     M_MUL,
     M_MUL_I, 
     M_MULO,
@@ -312,9 +359,16 @@ enum {
     M_S_DOB,
     M_S_DAB,
     M_S_S,
+    M_SC_AB,
+    M_SCD_AB,
     M_SD_A,
     M_SD_OB,
     M_SD_AB,
+    M_SDC1_AB,
+    M_SDC2_AB,
+    M_SDC3_AB,
+    M_SDL_AB,
+    M_SDR_AB,
     M_SEQ,
     M_SEQ_I,
     M_SGE,
@@ -353,6 +407,12 @@ enum {
     M_SWR_AB,
     M_SUB_I,
     M_SUBU_I,
+    M_TEQ_I,
+    M_TGE_I,
+    M_TGEU_I,
+    M_TLT_I,
+    M_TLTU_I,
+    M_TNE_I,
     M_TRUNCWD,
     M_TRUNCWS,
     M_ULH,
@@ -368,12 +428,6 @@ enum {
     M_XOR_I
 };
 
-/* True if this instruction may require a delay slot.  */
-#define ANY_DELAY (INSN_LOAD_DELAY | INSN_UNCOND_BRANCH_DELAY \
-                  | INSN_COND_BRANCH_DELAY | INSN_COPROC_DELAY \
-                  | INSN_READ_HI | INSN_READ_LO \
-                  | INSN_READ_COND_CODE | INSN_WRITE_COND_CODE)
-
 /* The order of overloaded instructions matters.  Label arguments and
    register arguments look the same. Instructions that can have either
    for arguments must apear in the correct order in this table for the