Wakeup mhi is needed before pci_read/write only for QCA6390 and WCN6855. Since
wakeup & release mhi is enabled for all hardwares, below mhi assert is seen in
QCN9074 when doing 'rmmod ath11k_pci':
Kernel panic - not syncing: dev_wake != 0
CPU: 2 PID: 13535 Comm: procd Not tainted 4.4.60 #1
Hardware name: Generic DT based system
[<
80316dac>] (unwind_backtrace) from [<
80313700>] (show_stack+0x10/0x14)
[<
80313700>] (show_stack) from [<
805135dc>] (dump_stack+0x7c/0x9c)
[<
805135dc>] (dump_stack) from [<
8032136c>] (panic+0x84/0x1f8)
[<
8032136c>] (panic) from [<
80549b24>] (mhi_pm_disable_transition+0x3b8/0x5b8)
[<
80549b24>] (mhi_pm_disable_transition) from [<
80549ddc>] (mhi_power_down+0xb8/0x100)
[<
80549ddc>] (mhi_power_down) from [<
7f5242b0>] (ath11k_mhi_op_status_cb+0x284/0x3ac [ath11k_pci])
[E][__mhi_device_get_sync] Did not enter M0 state, cur_state:RESET pm_state:SHUTDOWN Process
[E][__mhi_device_get_sync] Did not enter M0 state, cur_state:RESET pm_state:SHUTDOWN Process
[E][__mhi_device_get_sync] Did not enter M0 state, cur_state:RESET pm_state:SHUTDOWN Process
[<
7f5242b0>] (ath11k_mhi_op_status_cb [ath11k_pci]) from [<
7f524878>] (ath11k_mhi_stop+0x10/0x20 [ath11k_pci])
[<
7f524878>] (ath11k_mhi_stop [ath11k_pci]) from [<
7f525b94>] (ath11k_pci_power_down+0x54/0x90 [ath11k_pci])
[<
7f525b94>] (ath11k_pci_power_down [ath11k_pci]) from [<
8056b2a8>] (pci_device_shutdown+0x30/0x44)
[<
8056b2a8>] (pci_device_shutdown) from [<
805cfa0c>] (device_shutdown+0x124/0x174)
[<
805cfa0c>] (device_shutdown) from [<
8033aaa4>] (kernel_restart+0xc/0x50)
[<
8033aaa4>] (kernel_restart) from [<
8033ada8>] (SyS_reboot+0x178/0x1ec)
[<
8033ada8>] (SyS_reboot) from [<
80301b80>] (ret_fast_syscall+0x0/0x34)
Hence, disable wakeup/release mhi using hw_param for other hardwares.
Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.5.0.1-01060-QCAHKSWPL_SILICONZ-1
Fixes: a05bd8513335 ("ath11k: read and write registers below unwindowed address")
Signed-off-by: Seevalamuthu Mariappan <quic_seevalam@quicinc.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1636702019-26142-1-git-send-email-quic_seevalam@quicinc.com
.hal_params = &ath11k_hw_hal_params_ipq8074,
.supports_dynamic_smps_6ghz = false,
.alloc_cacheable_memory = true,
+ .wakeup_mhi = false,
},
{
.hw_rev = ATH11K_HW_IPQ6018_HW10,
.hal_params = &ath11k_hw_hal_params_ipq8074,
.supports_dynamic_smps_6ghz = false,
.alloc_cacheable_memory = true,
+ .wakeup_mhi = false,
},
{
.name = "qca6390 hw2.0",
.hal_params = &ath11k_hw_hal_params_qca6390,
.supports_dynamic_smps_6ghz = false,
.alloc_cacheable_memory = false,
+ .wakeup_mhi = true,
},
{
.name = "qcn9074 hw1.0",
.hal_params = &ath11k_hw_hal_params_ipq8074,
.supports_dynamic_smps_6ghz = true,
.alloc_cacheable_memory = true,
+ .wakeup_mhi = false,
},
{
.name = "wcn6855 hw2.0",
.hal_params = &ath11k_hw_hal_params_qca6390,
.supports_dynamic_smps_6ghz = false,
.alloc_cacheable_memory = false,
+ .wakeup_mhi = true,
},
};
const struct ath11k_hw_hal_params *hal_params;
bool supports_dynamic_smps_6ghz;
bool alloc_cacheable_memory;
+ bool wakeup_mhi;
};
struct ath11k_hw_ops {
/* for offset beyond BAR + 4K - 32, may
* need to wakeup MHI to access.
*/
- if (test_bit(ATH11K_PCI_FLAG_INIT_DONE, &ab_pci->flags) &&
+ if (ab->hw_params.wakeup_mhi &&
+ test_bit(ATH11K_PCI_FLAG_INIT_DONE, &ab_pci->flags) &&
offset >= ACCESS_ALWAYS_OFF)
mhi_device_get_sync(ab_pci->mhi_ctrl->mhi_dev);
}
}
- if (test_bit(ATH11K_PCI_FLAG_INIT_DONE, &ab_pci->flags) &&
+ if (ab->hw_params.wakeup_mhi &&
+ test_bit(ATH11K_PCI_FLAG_INIT_DONE, &ab_pci->flags) &&
offset >= ACCESS_ALWAYS_OFF)
mhi_device_put(ab_pci->mhi_ctrl->mhi_dev);
}
/* for offset beyond BAR + 4K - 32, may
* need to wakeup MHI to access.
*/
- if (test_bit(ATH11K_PCI_FLAG_INIT_DONE, &ab_pci->flags) &&
+ if (ab->hw_params.wakeup_mhi &&
+ test_bit(ATH11K_PCI_FLAG_INIT_DONE, &ab_pci->flags) &&
offset >= ACCESS_ALWAYS_OFF)
mhi_device_get_sync(ab_pci->mhi_ctrl->mhi_dev);
}
}
- if (test_bit(ATH11K_PCI_FLAG_INIT_DONE, &ab_pci->flags) &&
+ if (ab->hw_params.wakeup_mhi &&
+ test_bit(ATH11K_PCI_FLAG_INIT_DONE, &ab_pci->flags) &&
offset >= ACCESS_ALWAYS_OFF)
mhi_device_put(ab_pci->mhi_ctrl->mhi_dev);