endmenu # "Platform Board Configuration"
+config ARC_CURR_IN_REG
+ bool "Dedicate Register r25 for current_task pointer"
+ default y
+ help
+ This reserved Register R25 to point to Current Task in
+ kernel mode. This saves memory access for each such access
+
config ARC_STACK_NONEXEC
bool "Make stack non-executable"
default n
cflags-y += -Iarch/arc/plat-$(PLATFORM)/include
cflags-y += -mA7 -fno-common -pipe -fno-builtin -D__linux__
+ifdef CONFIG_ARC_CURR_IN_REG
+# For a global register defintion, make sure it gets passed to every file
+# We had a customer reported bug where some code built in kernel was NOT using
+# any kernel headers, and missing the r25 global register
+# Can't do unconditionally (like above) because of recursive include issues
+# due to <linux/thread_info.h>
+LINUXINCLUDE += -include ${src}/arch/arc/include/asm/current.h
+endif
+
atleast_gcc44 := $(call cc-ifversion, -gt, 0402, y)
cflags-$(atleast_gcc44) += -fsection-anchors
generic-y += bitsperlong.h
generic-y += clkdev.h
generic-y += cputime.h
-generic-y += current.h
generic-y += device.h
generic-y += div64.h
generic-y += emergency-restart.h
--- /dev/null
+/*
+ * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Vineetg: May 16th, 2008
+ * - Current macro is now implemented as "global register" r25
+ */
+
+#ifndef _ASM_ARC_CURRENT_H
+#define _ASM_ARC_CURRENT_H
+
+#ifdef __KERNEL__
+
+#ifndef __ASSEMBLY__
+
+#ifdef CONFIG_ARC_CURR_IN_REG
+
+register struct task_struct *curr_arc asm("r25");
+#define current (curr_arc)
+
+#else
+#include <asm-generic/current.h>
+#endif /* ! CONFIG_ARC_CURR_IN_REG */
+
+#endif /* ! __ASSEMBLY__ */
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_ARC_CURRENT_H */
* was being "CLEARED" rather then "SET". Actually "SET" clears ZOL context
*
* Vineetg: May 5th 2008
+ * -Modified CALLEE_REG save/restore macros to handle the fact that
+ * r25 contains the kernel current task ptr
* - Defined Stack Switching Macro to be reused in all intr/excp hdlrs
* - Shaved off 11 instructions from RESTORE_ALL_INT1 by using the
* address Write back load ld.ab instead of seperate ld/add instn
#include <asm/asm-offsets.h>
#include <asm/arcregs.h>
#include <asm/ptrace.h>
+#include <asm/processor.h> /* For VMALLOC_START */
#include <asm/thread_info.h> /* For THREAD_SIZE */
/* Note on the LD/ST addr modes with addr reg wback
st.a r22, [sp, -4]
st.a r23, [sp, -4]
st.a r24, [sp, -4]
+
+#ifdef CONFIG_ARC_CURR_IN_REG
+ ; Retrieve orig r25 and save it on stack
+ ld r12, [r25, TASK_THREAD + THREAD_USER_R25]
+ st.a r12, [sp, -4]
+#else
st.a r25, [sp, -4]
+#endif
/* move up by 1 word to "create" callee_regs->"stack_place_holder" */
sub sp, sp, 4
st.a r22, [sp, -4]
st.a r23, [sp, -4]
st.a r24, [sp, -4]
+#ifdef CONFIG_ARC_CURR_IN_REG
+ sub sp, sp, 8
+#else
st.a r25, [sp, -4]
sub sp, sp, 4
+#endif
.endm
/*--------------------------------------------------------------
*-------------------------------------------------------------*/
.macro RESTORE_CALLEE_SAVED_KERNEL
+
+#ifdef CONFIG_ARC_CURR_IN_REG
+ add sp, sp, 8 /* skip callee_reg gutter and user r25 placeholder */
+#else
add sp, sp, 4 /* skip "callee_regs->stack_place_holder" */
ld.ab r25, [sp, 4]
+#endif
+
ld.ab r24, [sp, 4]
ld.ab r23, [sp, 4]
ld.ab r22, [sp, 4]
*
* Entry : r9 contains pre-IRQ/exception/trap status32
* Exit : SP is set to kernel mode stack pointer
+ * If CURR_IN_REG, r25 set to "current" task pointer
* Clobbers: r9
*-------------------------------------------------------------*/
GET_CURR_TASK_ON_CPU r9
+#ifdef CONFIG_ARC_CURR_IN_REG
+
+ /* If current task pointer cached in r25, time to
+ * -safekeep USER r25 in task->thread_struct->user_r25
+ * -load r25 with current task ptr
+ */
+ st.as r25, [r9, (TASK_THREAD + THREAD_USER_R25)/4]
+ mov r25, r9
+#endif
+
/* With current tsk in r9, get it's kernel mode stack base */
GET_TSK_STACK_BASE r9, r9
.macro SET_CURR_TASK_ON_CPU tsk, tmp
st \tsk, [@_current_task]
+#ifdef CONFIG_ARC_CURR_IN_REG
+ mov r25, \tsk
+#endif
.endm
/* ------------------------------------------------------------------
* Get the ptr to some field of Current Task at @off in task struct
+ * -Uses r25 for Current task ptr if that is enabled
*/
+#ifdef CONFIG_ARC_CURR_IN_REG
+
+.macro GET_CURR_TASK_FIELD_PTR off, reg
+ add \reg, r25, \off
+.endm
+
+#else
+
.macro GET_CURR_TASK_FIELD_PTR off, reg
GET_CURR_TASK_ON_CPU \reg
add \reg, \reg, \off
.endm
+#endif /* CONFIG_ARC_CURR_IN_REG */
+
#endif /* __ASSEMBLY__ */
#endif /* __ASM_ARC_ENTRY_H */
unsigned long callee_reg; /* pointer to callee regs */
unsigned long fault_address; /* dbls as brkpt holder as well */
unsigned long cause_code; /* Exception Cause Code (ECR) */
+#ifdef CONFIG_ARC_CURR_IN_REG
+ unsigned long user_r25;
+#endif
#ifdef CONFIG_ARC_FPU_SAVE_RESTORE
struct arc_fpu fpu;
#endif
DEFINE(THREAD_KSP, offsetof(struct thread_struct, ksp));
DEFINE(THREAD_CALLEE_REG, offsetof(struct thread_struct, callee_reg));
+#ifdef CONFIG_ARC_CURR_IN_REG
+ DEFINE(THREAD_USER_R25, offsetof(struct thread_struct, user_r25));
+#endif
DEFINE(THREAD_FAULT_ADDR,
offsetof(struct thread_struct, fault_address));
unsigned int prev = (unsigned int)prev_task;
unsigned int next = (unsigned int)next_task;
int num_words_to_skip = 1;
+#ifdef CONFIG_ARC_CURR_IN_REG
+ num_words_to_skip++;
+#endif
__asm__ __volatile__(
/* FP/BLINK save generated by gcc (standard function prologue */
"st.a r22, [sp, -4] \n\t"
"st.a r23, [sp, -4] \n\t"
"st.a r24, [sp, -4] \n\t"
+#ifndef CONFIG_ARC_CURR_IN_REG
"st.a r25, [sp, -4] \n\t"
+#endif
"sub sp, sp, %4 \n\t" /* create gutter at top */
/* set ksp of outgoing task in tsk->thread.ksp */
"add sp, sp, %4 \n\t" /* skip gutter at top */
+#ifndef CONFIG_ARC_CURR_IN_REG
"ld.ab r25, [sp, 4] \n\t"
+#endif
"ld.ab r24, [sp, 4] \n\t"
"ld.ab r23, [sp, 4] \n\t"
"ld.ab r22, [sp, 4] \n\t"
* was being "CLEARED" rather then "SET". Since it is Loop INHIBIT Bit,
* setting it and not clearing it clears ZOL context
*
+ * Vineetg: May 16th, 2008
+ * - r25 now contains the Current Task when in kernel
+ *
* Vineetg: Dec 22, 2007
* Minor Surgery of Low Level ISR to make it SMP safe
* - MMU_SCRATCH0 Reg used for freeing up r9 in Level 1 ISR
; XXX can this be optimised out
IRQ_DISABLE_SAVE r9, r10 ;@r10 has prisitine (pre-disable) copy
+#ifdef CONFIG_ARC_CURR_IN_REG
+ ; Restore User R25
+ ; Earlier this used to be only for returning to user mode
+ ; However with 2 levels of IRQ this can also happen even if
+ ; in kernel mode
+ ld r9, [sp, PT_sp]
+ brhs r9, VMALLOC_START, 8f
+ RESTORE_USER_R25
+8:
+#endif
+
; Restore REG File. In case multiple Events outstanding,
; use the same priorty as rtie: EXCPN, L2 IRQ, L1 IRQ, None
; Note that we use realtime STATUS32 (not pt_regs->status32) to