unsigned int offset, machine_mode ymode,
struct subreg_info *info)
{
- int nregs_xmode, nregs_ymode;
- int mode_multiple, nregs_multiple;
- int offset_adj, y_offset, y_offset_adj;
- int regsize_xmode, regsize_ymode;
- bool rknown;
+ unsigned int nregs_xmode, nregs_ymode;
gcc_assert (xregno < FIRST_PSEUDO_REGISTER);
- rknown = false;
+ unsigned int xsize = GET_MODE_SIZE (xmode);
+ unsigned int ysize = GET_MODE_SIZE (ymode);
+ bool rknown = false;
- /* If there are holes in a non-scalar mode in registers, we expect
- that it is made up of its units concatenated together. */
+ /* If the register representation of a non-scalar mode has holes in it,
+ we expect the scalar units to be concatenated together, with the holes
+ distributed evenly among the scalar units. Each scalar unit must occupy
+ at least one register. */
if (HARD_REGNO_NREGS_HAS_PADDING (xregno, xmode))
{
- machine_mode xmode_unit;
-
nregs_xmode = HARD_REGNO_NREGS_WITH_PADDING (xregno, xmode);
- xmode_unit = GET_MODE_INNER (xmode);
+ unsigned int nunits = GET_MODE_NUNITS (xmode);
+ machine_mode xmode_unit = GET_MODE_INNER (xmode);
gcc_assert (HARD_REGNO_NREGS_HAS_PADDING (xregno, xmode_unit));
gcc_assert (nregs_xmode
- == (GET_MODE_NUNITS (xmode)
+ == (nunits
* HARD_REGNO_NREGS_WITH_PADDING (xregno, xmode_unit)));
gcc_assert (hard_regno_nregs[xregno][xmode]
- == (hard_regno_nregs[xregno][xmode_unit]
- * GET_MODE_NUNITS (xmode)));
+ == hard_regno_nregs[xregno][xmode_unit] * nunits);
/* You can only ask for a SUBREG of a value with holes in the middle
if you don't cross the holes. (Such a SUBREG should be done by
3 for each part, but in memory it's two 128-bit parts.
Padding is assumed to be at the end (not necessarily the 'high part')
of each unit. */
- if ((offset / GET_MODE_SIZE (xmode_unit) + 1
- < GET_MODE_NUNITS (xmode))
+ if ((offset / GET_MODE_SIZE (xmode_unit) + 1 < nunits)
&& (offset / GET_MODE_SIZE (xmode_unit)
- != ((offset + GET_MODE_SIZE (ymode) - 1)
- / GET_MODE_SIZE (xmode_unit))))
+ != ((offset + ysize - 1) / GET_MODE_SIZE (xmode_unit))))
{
info->representable_p = false;
rknown = true;
nregs_ymode = hard_regno_nregs[xregno][ymode];
/* Paradoxical subregs are otherwise valid. */
- if (!rknown
- && offset == 0
- && GET_MODE_PRECISION (ymode) > GET_MODE_PRECISION (xmode))
+ if (!rknown && offset == 0 && ysize > xsize)
{
info->representable_p = true;
/* If this is a big endian paradoxical subreg, which uses more
actual hard registers than the original register, we must
return a negative offset so that we find the proper highpart
- of the register. */
- if (GET_MODE_SIZE (ymode) > UNITS_PER_WORD
- ? REG_WORDS_BIG_ENDIAN : BYTES_BIG_ENDIAN)
- info->offset = nregs_xmode - nregs_ymode;
+ of the register.
+
+ We assume that the ordering of registers within a multi-register
+ value has a consistent endianness: if bytes and register words
+ have different endianness, the hard registers that make up a
+ multi-register value must be at least word-sized. */
+ if (REG_WORDS_BIG_ENDIAN)
+ info->offset = (int) nregs_xmode - (int) nregs_ymode;
else
info->offset = 0;
info->nregs = nregs_ymode;
modes, we cannot generally form this subreg. */
if (!HARD_REGNO_NREGS_HAS_PADDING (xregno, xmode)
&& !HARD_REGNO_NREGS_HAS_PADDING (xregno, ymode)
- && (GET_MODE_SIZE (xmode) % nregs_xmode) == 0
- && (GET_MODE_SIZE (ymode) % nregs_ymode) == 0)
+ && (xsize % nregs_xmode) == 0
+ && (ysize % nregs_ymode) == 0)
{
- regsize_xmode = GET_MODE_SIZE (xmode) / nregs_xmode;
- regsize_ymode = GET_MODE_SIZE (ymode) / nregs_ymode;
- if (!rknown && regsize_xmode > regsize_ymode && nregs_ymode > 1)
- {
- info->representable_p = false;
- info->nregs
- = (GET_MODE_SIZE (ymode) + regsize_xmode - 1) / regsize_xmode;
- info->offset = offset / regsize_xmode;
- return;
- }
- if (!rknown && regsize_ymode > regsize_xmode && nregs_xmode > 1)
+ int regsize_xmode = xsize / nregs_xmode;
+ int regsize_ymode = ysize / nregs_ymode;
+ if (!rknown
+ && ((nregs_ymode > 1 && regsize_xmode > regsize_ymode)
+ || (nregs_xmode > 1 && regsize_ymode > regsize_xmode)))
{
info->representable_p = false;
- info->nregs
- = (GET_MODE_SIZE (ymode) + regsize_xmode - 1) / regsize_xmode;
+ info->nregs = CEIL (ysize, regsize_xmode);
info->offset = offset / regsize_xmode;
return;
}
/* It's not valid to extract a subreg of mode YMODE at OFFSET that
would go outside of XMODE. */
- if (!rknown
- && GET_MODE_SIZE (ymode) + offset > GET_MODE_SIZE (xmode))
+ if (!rknown && ysize + offset > xsize)
{
info->representable_p = false;
info->nregs = nregs_ymode;
info->representable_p = true;
info->nregs = nregs_ymode;
info->offset = offset / regsize_ymode;
- gcc_assert (info->offset + info->nregs <= nregs_xmode);
+ gcc_assert (info->offset + info->nregs <= (int) nregs_xmode);
return;
}
}
}
}
- /* This should always pass, otherwise we don't know how to verify
- the constraint. These conditions may be relaxed but
- subreg_regno_offset would need to be redesigned. */
- gcc_assert ((GET_MODE_SIZE (xmode) % GET_MODE_SIZE (ymode)) == 0);
+ /* Set NUM_BLOCKS to the number of independently-representable YMODE
+ values there are in (reg:XMODE XREGNO). We can view the register
+ as consisting of this number of independent "blocks", where each
+ block occupies NREGS_YMODE registers and contains exactly one
+ representable YMODE value. */
gcc_assert ((nregs_xmode % nregs_ymode) == 0);
+ unsigned int num_blocks = nregs_xmode / nregs_ymode;
- if (WORDS_BIG_ENDIAN != REG_WORDS_BIG_ENDIAN
- && GET_MODE_SIZE (xmode) > UNITS_PER_WORD)
- {
- HOST_WIDE_INT xsize = GET_MODE_SIZE (xmode);
- HOST_WIDE_INT ysize = GET_MODE_SIZE (ymode);
- HOST_WIDE_INT off_low = offset & (ysize - 1);
- HOST_WIDE_INT off_high = offset & ~(ysize - 1);
- offset = (xsize - ysize - off_high) | off_low;
- }
- /* The XMODE value can be seen as a vector of NREGS_XMODE
- values. The subreg must represent a lowpart of given field.
- Compute what field it is. */
- offset_adj = offset;
- offset_adj -= subreg_lowpart_offset (ymode,
- mode_for_size (GET_MODE_BITSIZE (xmode)
- / nregs_xmode,
- MODE_INT, 0));
-
- /* Size of ymode must not be greater than the size of xmode. */
- mode_multiple = GET_MODE_SIZE (xmode) / GET_MODE_SIZE (ymode);
- gcc_assert (mode_multiple != 0);
-
- y_offset = offset / GET_MODE_SIZE (ymode);
- y_offset_adj = offset_adj / GET_MODE_SIZE (ymode);
- nregs_multiple = nregs_xmode / nregs_ymode;
-
- gcc_assert ((offset_adj % GET_MODE_SIZE (ymode)) == 0);
- gcc_assert ((mode_multiple % nregs_multiple) == 0);
+ /* Calculate the number of bytes in each block. This must always
+ be exact, otherwise we don't know how to verify the constraint.
+ These conditions may be relaxed but subreg_regno_offset would
+ need to be redesigned. */
+ gcc_assert ((xsize % num_blocks) == 0);
+ unsigned int bytes_per_block = xsize / num_blocks;
+
+ /* Get the number of the first block that contains the subreg and the byte
+ offset of the subreg from the start of that block. */
+ unsigned int block_number = offset / bytes_per_block;
+ unsigned int subblock_offset = offset % bytes_per_block;
if (!rknown)
{
- info->representable_p = (!(y_offset_adj % (mode_multiple / nregs_multiple)));
+ /* Only the lowpart of each block is representable. */
+ info->representable_p
+ = (subblock_offset
+ == subreg_size_lowpart_offset (ysize, bytes_per_block));
rknown = true;
}
- info->offset = (y_offset / (mode_multiple / nregs_multiple)) * nregs_ymode;
+
+ /* We assume that the ordering of registers within a multi-register
+ value has a consistent endianness: if bytes and register words
+ have different endianness, the hard registers that make up a
+ multi-register value must be at least word-sized. */
+ if (WORDS_BIG_ENDIAN != REG_WORDS_BIG_ENDIAN)
+ /* The block number we calculated above followed memory endianness.
+ Convert it to register endianness by counting back from the end.
+ (Note that, because of the assumption above, each block must be
+ at least word-sized.) */
+ info->offset = (num_blocks - block_number - 1) * nregs_ymode;
+ else
+ info->offset = block_number * nregs_ymode;
info->nregs = nregs_ymode;
}
projects / platform / upstream / gcc.git / commitdiff