struct sta_info *sta);
static void rs_fill_link_cmd(const struct iwl_priv *priv,
struct iwl4965_lq_sta *lq_sta,
- u32 rate_n_flags,
- struct iwl_link_quality_cmd *tbl);
+ u32 rate_n_flags);
#ifdef CONFIG_MAC80211_DEBUGFS
lq_sta->action_counter++;
/* Don't change antenna if success has been great */
- /*FIXME:RS:not sure this is really needed*/
if (window->success_ratio >= IWL_RS_GOOD_RATIO)
break;
if (rs_toggle_antenna(valid_tx_ant,
&search_tbl->current_rate, search_tbl)) {
- rs_set_expected_tpt_table(lq_sta, search_tbl);
lq_sta->search_better_tbl = 1;
goto out;
}
switch (tbl->action) {
case IWL_SISO_SWITCH_ANTENNA:
IWL_DEBUG_RATE("LQ: SISO toggle Antenna\n");
- /*FIXME:RS: is this really needed for SISO?*/
if (window->success_ratio >= IWL_RS_GOOD_RATIO)
break;
if (!rate_scale_index_msk)
rate_scale_index_msk = rate_mask;
- /* If current rate is no longer supported on current association,
- * or user changed preferences for rates, find a new supported rate. */
- if (index < 0 || !((1 << index) & rate_scale_index_msk)) {
- index = IWL_INVALID_VALUE;
- update_lq = 1;
-
- /* get the highest available rate */
- for (i = 0; i <= IWL_RATE_COUNT; i++) {
- if ((1 << i) & rate_scale_index_msk)
- index = i;
- }
-
- if (index == IWL_INVALID_VALUE) {
- IWL_WARNING("Can not find a suitable rate\n");
- return;
- }
+ if (!((1 << index) & rate_scale_index_msk)) {
+ IWL_ERROR("Current Rate is not valid\n");
+ return;
}
/* Get expected throughput table and history window for current rate */
- if (!tbl->expected_tpt)
- rs_set_expected_tpt_table(lq_sta, tbl);
+ if (!tbl->expected_tpt) {
+ IWL_ERROR("tbl->expected_tpt is NULL\n");
+ return;
+ }
window = &(tbl->win[index]);
* in current association (use new rate found above).
*/
fail_count = window->counter - window->success_counter;
- if (((fail_count < IWL_RATE_MIN_FAILURE_TH) &&
- (window->success_counter < IWL_RATE_MIN_SUCCESS_TH))
- || (tbl->expected_tpt == NULL)) {
- IWL_DEBUG_RATE("LQ: still below TH succ %d total %d "
+ if ((fail_count < IWL_RATE_MIN_FAILURE_TH) &&
+ (window->success_counter < IWL_RATE_MIN_SUCCESS_TH)) {
+ IWL_DEBUG_RATE("LQ: still below TH. succ=%d total=%d "
"for index %d\n",
window->success_counter, window->counter, index);
* or search for a new one? */
rs_stay_in_table(lq_sta);
- /* Set up new rate table in uCode, if needed */
- if (update_lq) {
- rate = rate_n_flags_from_tbl(tbl, index, is_green);
- rs_fill_link_cmd(priv, lq_sta, rate, &lq_sta->lq);
- iwl_send_lq_cmd(priv, &lq_sta->lq, CMD_ASYNC);
- }
goto out;
/* Else we have enough samples; calculate estimate of
* actual average throughput */
- } else
- window->average_tpt = ((window->success_ratio *
+ } else {
+ /*FIXME:RS remove this else if we don't get this error*/
+ if (window->average_tpt != ((window->success_ratio *
+ tbl->expected_tpt[index] + 64) / 128)) {
+ IWL_ERROR("expected_tpt should have been calculated"
+ " by now\n");
+ window->average_tpt = ((window->success_ratio *
tbl->expected_tpt[index] + 64) / 128);
+ }
+ }
/* If we are searching for better modulation mode, check success. */
if (lq_sta->search_better_tbl) {
- int success_limit = IWL_RATE_SCALE_SWITCH;
/* If good success, continue using the "search" mode;
* no need to send new link quality command, since we're
* continuing to use the setup that we've been trying. */
- if ((window->success_ratio > success_limit) ||
- (window->average_tpt > lq_sta->last_tpt)) {
- if (!is_legacy(tbl->lq_type)) {
- IWL_DEBUG_RATE("LQ: we are switching to HT"
- " rate suc %d current tpt %d"
- " old tpt %d\n",
- window->success_ratio,
- window->average_tpt,
- lq_sta->last_tpt);
+ if (window->average_tpt > lq_sta->last_tpt) {
+
+ IWL_DEBUG_RATE("LQ: SWITCHING TO CURRENT TABLE "
+ "suc=%d cur-tpt=%d old-tpt=%d\n",
+ window->success_ratio,
+ window->average_tpt,
+ lq_sta->last_tpt);
+
+ if (!is_legacy(tbl->lq_type))
lq_sta->enable_counter = 1;
- }
+
/* Swap tables; "search" becomes "active" */
lq_sta->active_tbl = active_tbl;
current_tpt = window->average_tpt;
/* Else poor success; go back to mode in "active" table */
} else {
+
+ IWL_DEBUG_RATE("LQ: GOING BACK TO THE OLD TABLE "
+ "suc=%d cur-tpt=%d old-tpt=%d\n",
+ window->success_ratio,
+ window->average_tpt,
+ lq_sta->last_tpt);
+
/* Nullify "search" table */
tbl->lq_type = LQ_NONE;
/* Need to set up a new rate table in uCode */
update_lq = 1;
- IWL_DEBUG_RATE("XXY GO BACK TO OLD TABLE\n");
}
/* Either way, we've made a decision; modulation mode
/* Replace uCode's rate table for the destination station. */
if (update_lq) {
rate = rate_n_flags_from_tbl(tbl, index, is_green);
- rs_fill_link_cmd(priv, lq_sta, rate, &lq_sta->lq);
+ rs_fill_link_cmd(priv, lq_sta, rate);
iwl_send_lq_cmd(priv, &lq_sta->lq, CMD_ASYNC);
}
IWL_DEBUG_RATE("Switch current mcs: %X index: %d\n",
tbl->current_rate, index);
- rs_fill_link_cmd(priv, lq_sta, tbl->current_rate,
- &lq_sta->lq);
+ rs_fill_link_cmd(priv, lq_sta, tbl->current_rate);
iwl_send_lq_cmd(priv, &lq_sta->lq, CMD_ASYNC);
}
rate = rate_n_flags_from_tbl(tbl, rate_idx, use_green);
tbl->current_rate = rate;
rs_set_expected_tpt_table(lq_sta, tbl);
- rs_fill_link_cmd(NULL, lq_sta, rate, &lq_sta->lq);
+ rs_fill_link_cmd(NULL, lq_sta, rate);
iwl_send_lq_cmd(priv, &lq_sta->lq, CMD_ASYNC);
out:
return;
for (i = 0; i < IWL_RATE_COUNT; i++)
rs_rate_scale_clear_window(&(lq_sta->lq_info[j].win[i]));
- IWL_DEBUG_RATE("rate scale global init\n");
+ IWL_DEBUG_RATE("LQ: *** rate scale global init ***\n");
/* TODO: what is a good starting rate for STA? About middle? Maybe not
* the lowest or the highest rate.. Could consider using RSSI from
* previous packets? Need to have IEEE 802.1X auth succeed immediately
lq_sta->active_mimo3_rate &= ~((u16)0x2);
lq_sta->active_mimo3_rate <<= IWL_FIRST_OFDM_RATE;
- IWL_DEBUG_RATE("SISO RATE %X MIMO2 RATE %X MIMO3 RATE %X\n",
+ IWL_DEBUG_RATE("SISO-RATE=%X MIMO2-RATE=%X MIMO3-RATE=%X\n",
lq_sta->active_siso_rate,
lq_sta->active_mimo2_rate,
lq_sta->active_mimo3_rate);
+ /* These values will be overriden later */
+ lq_sta->lq.general_params.single_stream_ant_msk = ANT_A;
+ lq_sta->lq.general_params.dual_stream_ant_msk = ANT_AB;
+
/* as default allow aggregation for all tids */
lq_sta->tx_agg_tid_en = IWL_AGG_ALL_TID;
#endif /*CONFIG_IWL4965_HT*/
static void rs_fill_link_cmd(const struct iwl_priv *priv,
struct iwl4965_lq_sta *lq_sta,
- u32 new_rate,
- struct iwl_link_quality_cmd *lq_cmd)
+ u32 new_rate)
{
struct iwl4965_scale_tbl_info tbl_type;
int index = 0;
u8 ant_toggle_cnt = 0;
u8 use_ht_possible = 1;
u8 valid_tx_ant = 0;
+ struct iwl_link_quality_cmd *lq_cmd = &lq_sta->lq;
/* Override starting rate (index 0) if needed for debug purposes */
rs_dbgfs_set_mcs(lq_sta, &new_rate, index);
/* Fill 1st table entry (index 0) */
lq_cmd->rs_table[index].rate_n_flags = cpu_to_le32(new_rate);
- /*FIXME:RS*/
- if (is_mimo(tbl_type.lq_type) || (tbl_type.ant_type == ANT_A))
- lq_cmd->general_params.single_stream_ant_msk
- = LINK_QUAL_ANT_A_MSK;
- else
- lq_cmd->general_params.single_stream_ant_msk
- = LINK_QUAL_ANT_B_MSK;
+ if (num_of_ant(tbl_type.ant_type) == 1) {
+ lq_cmd->general_params.single_stream_ant_msk =
+ tbl_type.ant_type;
+ } else if (num_of_ant(tbl_type.ant_type) == 2) {
+ lq_cmd->general_params.dual_stream_ant_msk =
+ tbl_type.ant_type;
+ } /* otherwise we don't modify the existing value */
index++;
repeat_rate--;
repeat_rate--;
}
- lq_cmd->general_params.dual_stream_ant_msk = 3;
lq_cmd->agg_params.agg_dis_start_th = 3;
lq_cmd->agg_params.agg_time_limit = cpu_to_le16(4000);
}
lq_sta->lq.sta_id, lq_sta->dbg_fixed_rate);
if (lq_sta->dbg_fixed_rate) {
- rs_fill_link_cmd(NULL, lq_sta, lq_sta->dbg_fixed_rate,
- &lq_sta->lq);
+ rs_fill_link_cmd(NULL, lq_sta, lq_sta->dbg_fixed_rate);
iwl_send_lq_cmd(lq_sta->drv, &lq_sta->lq, CMD_ASYNC);
}