struct lpfc_hba {
/* SCSI interface function jump table entries */
- int (*lpfc_new_scsi_buf)
- (struct lpfc_vport *, int);
struct lpfc_scsi_buf * (*lpfc_get_scsi_buf)
(struct lpfc_hba *, struct lpfc_nodelist *);
int (*lpfc_scsi_prep_dma_buf)
uint32_t cfg_enable_fc4_type;
uint32_t cfg_enable_bbcr; /* Enable BB Credit Recovery */
uint32_t cfg_enable_dpp; /* Enable Direct Packet Push */
- uint32_t cfg_xri_split;
#define LPFC_ENABLE_FCP 1
#define LPFC_ENABLE_NVME 2
#define LPFC_ENABLE_BOTH 3
struct list_head lpfc_scsi_buf_list_get;
struct list_head lpfc_scsi_buf_list_put;
uint32_t total_scsi_bufs;
- spinlock_t nvme_buf_list_get_lock; /* NVME buf alloc list lock */
- spinlock_t nvme_buf_list_put_lock; /* NVME buf free list lock */
- struct list_head lpfc_nvme_buf_list_get;
- struct list_head lpfc_nvme_buf_list_put;
- uint32_t total_nvme_bufs;
- uint32_t get_nvme_bufs;
- uint32_t put_nvme_bufs;
+ spinlock_t common_buf_list_get_lock; /* Common buf alloc list lock */
+ spinlock_t common_buf_list_put_lock; /* Common buf free list lock */
+ struct list_head lpfc_common_buf_list_get;
+ struct list_head lpfc_common_buf_list_put;
+ uint32_t total_common_bufs;
+ uint32_t get_common_bufs;
+ uint32_t put_common_bufs;
struct list_head lpfc_iocb_list;
uint32_t total_iocbq_bufs;
struct list_head active_rrq_list;
rcu_read_lock();
scnprintf(tmp, sizeof(tmp),
- "XRI Dist lpfc%d Total %d NVME %d SCSI %d ELS %d\n",
+ "XRI Dist lpfc%d Total %d IO %d ELS %d\n",
phba->brd_no,
phba->sli4_hba.max_cfg_param.max_xri,
- phba->sli4_hba.nvme_xri_max,
- phba->sli4_hba.scsi_xri_max,
+ phba->sli4_hba.common_xri_max,
lpfc_sli4_get_els_iocb_cnt(phba));
if (strlcat(buf, tmp, PAGE_SIZE) >= PAGE_SIZE)
goto buffer_done;
"Enable FC4 Protocol support - FCP / NVME");
/*
- * lpfc_xri_split: Defines the division of XRI resources between SCSI and NVME
- * This parameter is only used if:
- * lpfc_enable_fc4_type is 3 - register both FCP and NVME and
- * port is not configured for NVMET.
- *
- * ELS/CT always get 10% of XRIs, up to a maximum of 250
- * The remaining XRIs get split up based on lpfc_xri_split per port:
- *
- * Supported Values are in percentages
- * the xri_split value is the percentage the SCSI port will get. The remaining
- * percentage will go to NVME.
- */
-LPFC_ATTR_R(xri_split, 50, 10, 90,
- "Percentage of FCP XRI resources versus NVME");
-
-/*
# lpfc_log_verbose: Only turn this flag on if you are willing to risk being
# deluged with LOTS of information.
# You can set a bit mask to record specific types of verbose messages:
&dev_attr_lpfc_nodev_tmo,
&dev_attr_lpfc_devloss_tmo,
&dev_attr_lpfc_enable_fc4_type,
- &dev_attr_lpfc_xri_split,
&dev_attr_lpfc_fcp_class,
&dev_attr_lpfc_use_adisc,
&dev_attr_lpfc_first_burst_size,
phba->cfg_soft_wwnn = 0L;
phba->cfg_soft_wwpn = 0L;
- lpfc_xri_split_init(phba, lpfc_xri_split);
lpfc_sg_seg_cnt_init(phba, lpfc_sg_seg_cnt);
lpfc_hba_queue_depth_init(phba, lpfc_hba_queue_depth);
lpfc_hba_log_verbose_init(phba, lpfc_log_verbose);
void lpfc_sli4_node_prep(struct lpfc_hba *);
int lpfc_sli4_els_sgl_update(struct lpfc_hba *phba);
int lpfc_sli4_nvmet_sgl_update(struct lpfc_hba *phba);
-int lpfc_sli4_scsi_sgl_update(struct lpfc_hba *phba);
-int lpfc_sli4_nvme_sgl_update(struct lpfc_hba *phba);
+int lpfc_sli4_common_sgl_update(struct lpfc_hba *phba);
+int lpfc_sli4_post_common_sgl_list(struct lpfc_hba *phba,
+ struct list_head *blist, int xricnt);
+int lpfc_new_common_buf(struct lpfc_hba *phba, int num_to_alloc);
void lpfc_free_sgl_list(struct lpfc_hba *, struct list_head *);
uint32_t lpfc_sli_port_speed_get(struct lpfc_hba *);
int lpfc_sli4_request_firmware_update(struct lpfc_hba *, uint8_t);
spin_unlock_irq(&phba->hbalock);
- list_for_each_entry_safe(psb, psb_next, &aborts, list) {
- psb->pCmd = NULL;
- psb->status = IOSTAT_SUCCESS;
+ if (phba->cfg_enable_fc4_type & LPFC_ENABLE_FCP) {
+ list_for_each_entry_safe(psb, psb_next, &aborts, list) {
+ psb->pCmd = NULL;
+ psb->status = IOSTAT_SUCCESS;
+ }
+ spin_lock_irqsave(&phba->common_buf_list_put_lock, iflag);
+ list_splice(&aborts, &phba->lpfc_common_buf_list_put);
+ spin_unlock_irqrestore(&phba->common_buf_list_put_lock, iflag);
}
- spin_lock_irqsave(&phba->scsi_buf_list_put_lock, iflag);
- list_splice(&aborts, &phba->lpfc_scsi_buf_list_put);
- spin_unlock_irqrestore(&phba->scsi_buf_list_put_lock, iflag);
if (phba->cfg_enable_fc4_type & LPFC_ENABLE_NVME) {
cnt = 0;
psb->status = IOSTAT_SUCCESS;
cnt++;
}
- spin_lock_irqsave(&phba->nvme_buf_list_put_lock, iflag);
- phba->put_nvme_bufs += cnt;
- list_splice(&nvme_aborts, &phba->lpfc_nvme_buf_list_put);
- spin_unlock_irqrestore(&phba->nvme_buf_list_put_lock, iflag);
+ spin_lock_irqsave(&phba->common_buf_list_put_lock, iflag);
+ phba->put_common_bufs += cnt;
+ list_splice(&nvme_aborts, &phba->lpfc_common_buf_list_put);
+ spin_unlock_irqrestore(&phba->common_buf_list_put_lock, iflag);
list_for_each_entry_safe(ctxp, ctxp_next, &nvmet_aborts, list) {
ctxp->flag &= ~(LPFC_NVMET_XBUSY | LPFC_NVMET_ABORT_OP);
"6132 NVME restore reg failed "
"on nvmei error x%x\n", error);
}
+ /* Don't post more new bufs if repost already recovered
+ * the nvme sgls.
+ */
+ if (phba->sli4_hba.common_xri_cnt == 0) {
+ i = lpfc_new_common_buf(phba,
+ phba->sli4_hba.common_xri_max);
+ if (i == 0) {
+ lpfc_unblock_mgmt_io(phba);
+ return 1;
+ }
+ phba->total_common_bufs += i;
+ }
} else {
lpfc_sli_queue_init(phba);
if (lpfc_sli_hba_setup(phba)) { /* Initialize SLI2/SLI3 HBA */
spin_unlock(&phba->scsi_buf_list_get_lock);
spin_unlock_irq(&phba->hbalock);
}
+
/**
- * lpfc_nvme_free - Free all the NVME buffers and IOCBs from driver lists
+ * lpfc_common_free - Free all the IO buffers and IOCBs from driver lists
* @phba: pointer to lpfc hba data structure.
*
- * This routine is to free all the NVME buffers and IOCBs from the driver
+ * This routine is to free all the IO buffers and IOCBs from the driver
* list back to kernel. It is called from lpfc_pci_remove_one to free
* the internal resources before the device is removed from the system.
**/
static void
-lpfc_nvme_free(struct lpfc_hba *phba)
+lpfc_common_free(struct lpfc_hba *phba)
{
struct lpfc_nvme_buf *lpfc_ncmd, *lpfc_ncmd_next;
- if (!(phba->cfg_enable_fc4_type & LPFC_ENABLE_NVME))
- return;
-
spin_lock_irq(&phba->hbalock);
/* Release all the lpfc_nvme_bufs maintained by this host. */
- spin_lock(&phba->nvme_buf_list_put_lock);
+ spin_lock(&phba->common_buf_list_put_lock);
list_for_each_entry_safe(lpfc_ncmd, lpfc_ncmd_next,
- &phba->lpfc_nvme_buf_list_put, list) {
+ &phba->lpfc_common_buf_list_put, list) {
list_del(&lpfc_ncmd->list);
- phba->put_nvme_bufs--;
+ phba->put_common_bufs--;
dma_pool_free(phba->lpfc_sg_dma_buf_pool, lpfc_ncmd->data,
lpfc_ncmd->dma_handle);
kfree(lpfc_ncmd);
- phba->total_nvme_bufs--;
+ phba->total_common_bufs--;
}
- spin_unlock(&phba->nvme_buf_list_put_lock);
+ spin_unlock(&phba->common_buf_list_put_lock);
- spin_lock(&phba->nvme_buf_list_get_lock);
+ spin_lock(&phba->common_buf_list_get_lock);
list_for_each_entry_safe(lpfc_ncmd, lpfc_ncmd_next,
- &phba->lpfc_nvme_buf_list_get, list) {
+ &phba->lpfc_common_buf_list_get, list) {
list_del(&lpfc_ncmd->list);
- phba->get_nvme_bufs--;
+ phba->get_common_bufs--;
dma_pool_free(phba->lpfc_sg_dma_buf_pool, lpfc_ncmd->data,
lpfc_ncmd->dma_handle);
kfree(lpfc_ncmd);
- phba->total_nvme_bufs--;
+ phba->total_common_bufs--;
}
- spin_unlock(&phba->nvme_buf_list_get_lock);
+ spin_unlock(&phba->common_buf_list_get_lock);
spin_unlock_irq(&phba->hbalock);
}
+
/**
* lpfc_sli4_els_sgl_update - update ELS xri-sgl sizing and mapping
* @phba: pointer to lpfc hba data structure.
}
/**
- * lpfc_sli4_scsi_sgl_update - update xri-sgl sizing and mapping
+ * lpfc_sli4_common_sgl_update - update xri-sgl sizing and mapping
* @phba: pointer to lpfc hba data structure.
*
* This routine first calculates the sizes of the current els and allocated
* 0 - successful (for now, it always returns 0)
**/
int
-lpfc_sli4_scsi_sgl_update(struct lpfc_hba *phba)
+lpfc_sli4_common_sgl_update(struct lpfc_hba *phba)
{
- struct lpfc_scsi_buf *psb, *psb_next;
- uint16_t i, lxri, els_xri_cnt, scsi_xri_cnt;
- LIST_HEAD(scsi_sgl_list);
- int rc;
+ struct lpfc_nvme_buf *lpfc_ncmd = NULL, *lpfc_ncmd_next = NULL;
+ uint16_t i, lxri, els_xri_cnt;
+ uint16_t common_xri_cnt, common_xri_max;
+ LIST_HEAD(common_sgl_list);
+ int rc, cnt;
- /*
- * update on pci function's els xri-sgl list
- */
- els_xri_cnt = lpfc_sli4_get_els_iocb_cnt(phba);
- phba->total_scsi_bufs = 0;
+ phba->total_common_bufs = 0;
+ phba->get_common_bufs = 0;
+ phba->put_common_bufs = 0;
/*
- * update on pci function's allocated scsi xri-sgl list
+ * update on pci function's allocated nvme xri-sgl list
*/
- /* maximum number of xris available for scsi buffers */
- phba->sli4_hba.scsi_xri_max = phba->sli4_hba.max_cfg_param.max_xri -
- els_xri_cnt;
- if (!(phba->cfg_enable_fc4_type & LPFC_ENABLE_FCP))
- return 0;
-
- if (phba->cfg_enable_fc4_type & LPFC_ENABLE_NVME)
- phba->sli4_hba.scsi_xri_max = /* Split them up */
- (phba->sli4_hba.scsi_xri_max *
- phba->cfg_xri_split) / 100;
-
- spin_lock_irq(&phba->scsi_buf_list_get_lock);
- spin_lock(&phba->scsi_buf_list_put_lock);
- list_splice_init(&phba->lpfc_scsi_buf_list_get, &scsi_sgl_list);
- list_splice(&phba->lpfc_scsi_buf_list_put, &scsi_sgl_list);
- spin_unlock(&phba->scsi_buf_list_put_lock);
- spin_unlock_irq(&phba->scsi_buf_list_get_lock);
+ /* maximum number of xris available for nvme buffers */
+ els_xri_cnt = lpfc_sli4_get_els_iocb_cnt(phba);
+ common_xri_max = phba->sli4_hba.max_cfg_param.max_xri - els_xri_cnt;
+ phba->sli4_hba.common_xri_max = common_xri_max;
lpfc_printf_log(phba, KERN_INFO, LOG_SLI,
- "6060 Current allocated SCSI xri-sgl count:%d, "
- "maximum SCSI xri count:%d (split:%d)\n",
- phba->sli4_hba.scsi_xri_cnt,
- phba->sli4_hba.scsi_xri_max, phba->cfg_xri_split);
-
- if (phba->sli4_hba.scsi_xri_cnt > phba->sli4_hba.scsi_xri_max) {
- /* max scsi xri shrinked below the allocated scsi buffers */
- scsi_xri_cnt = phba->sli4_hba.scsi_xri_cnt -
- phba->sli4_hba.scsi_xri_max;
- /* release the extra allocated scsi buffers */
- for (i = 0; i < scsi_xri_cnt; i++) {
- list_remove_head(&scsi_sgl_list, psb,
- struct lpfc_scsi_buf, list);
- if (psb) {
+ "6074 Current allocated XRI sgl count:%d, "
+ "maximum XRI count:%d\n",
+ phba->sli4_hba.common_xri_cnt,
+ phba->sli4_hba.common_xri_max);
+
+ spin_lock_irq(&phba->common_buf_list_get_lock);
+ spin_lock(&phba->common_buf_list_put_lock);
+ list_splice_init(&phba->lpfc_common_buf_list_get, &common_sgl_list);
+ list_splice(&phba->lpfc_common_buf_list_put, &common_sgl_list);
+ cnt = phba->get_common_bufs + phba->put_common_bufs;
+ phba->get_common_bufs = 0;
+ phba->put_common_bufs = 0;
+ spin_unlock(&phba->common_buf_list_put_lock);
+ spin_unlock_irq(&phba->common_buf_list_get_lock);
+
+ if (phba->sli4_hba.common_xri_cnt > phba->sli4_hba.common_xri_max) {
+ /* max nvme xri shrunk below the allocated nvme buffers */
+ spin_lock_irq(&phba->common_buf_list_get_lock);
+ common_xri_cnt = phba->sli4_hba.common_xri_cnt -
+ phba->sli4_hba.common_xri_max;
+ spin_unlock_irq(&phba->common_buf_list_get_lock);
+ /* release the extra allocated nvme buffers */
+ for (i = 0; i < common_xri_cnt; i++) {
+ list_remove_head(&common_sgl_list, lpfc_ncmd,
+ struct lpfc_nvme_buf, list);
+ if (lpfc_ncmd) {
dma_pool_free(phba->lpfc_sg_dma_buf_pool,
- psb->data, psb->dma_handle);
- kfree(psb);
+ lpfc_ncmd->data,
+ lpfc_ncmd->dma_handle);
+ kfree(lpfc_ncmd);
}
}
- spin_lock_irq(&phba->scsi_buf_list_get_lock);
- phba->sli4_hba.scsi_xri_cnt -= scsi_xri_cnt;
- spin_unlock_irq(&phba->scsi_buf_list_get_lock);
+ spin_lock_irq(&phba->common_buf_list_get_lock);
+ phba->sli4_hba.common_xri_cnt -= common_xri_cnt;
+ spin_unlock_irq(&phba->common_buf_list_get_lock);
}
- /* update xris associated to remaining allocated scsi buffers */
- psb = NULL;
- psb_next = NULL;
- list_for_each_entry_safe(psb, psb_next, &scsi_sgl_list, list) {
+ /* update xris associated to remaining allocated nvme buffers */
+ lpfc_ncmd = NULL;
+ lpfc_ncmd_next = NULL;
+ list_for_each_entry_safe(lpfc_ncmd, lpfc_ncmd_next,
+ &common_sgl_list, list) {
lxri = lpfc_sli4_next_xritag(phba);
if (lxri == NO_XRI) {
lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
- "2560 Failed to allocate xri for "
- "scsi buffer\n");
+ "6075 Failed to allocate xri for "
+ "nvme buffer\n");
rc = -ENOMEM;
goto out_free_mem;
}
- psb->cur_iocbq.sli4_lxritag = lxri;
- psb->cur_iocbq.sli4_xritag = phba->sli4_hba.xri_ids[lxri];
+ lpfc_ncmd->cur_iocbq.sli4_lxritag = lxri;
+ lpfc_ncmd->cur_iocbq.sli4_xritag = phba->sli4_hba.xri_ids[lxri];
}
- spin_lock_irq(&phba->scsi_buf_list_get_lock);
- spin_lock(&phba->scsi_buf_list_put_lock);
- list_splice_init(&scsi_sgl_list, &phba->lpfc_scsi_buf_list_get);
- INIT_LIST_HEAD(&phba->lpfc_scsi_buf_list_put);
- spin_unlock(&phba->scsi_buf_list_put_lock);
- spin_unlock_irq(&phba->scsi_buf_list_get_lock);
+ spin_lock_irq(&phba->common_buf_list_get_lock);
+ spin_lock(&phba->common_buf_list_put_lock);
+ list_splice_init(&common_sgl_list, &phba->lpfc_common_buf_list_get);
+ phba->get_common_bufs = cnt;
+ INIT_LIST_HEAD(&phba->lpfc_common_buf_list_put);
+ spin_unlock(&phba->common_buf_list_put_lock);
+ spin_unlock_irq(&phba->common_buf_list_get_lock);
return 0;
out_free_mem:
- lpfc_scsi_free(phba);
+ lpfc_common_free(phba);
return rc;
}
+/**
+ * lpfc_new_common_buf - IO buffer allocator for HBA with SLI4 IF spec
+ * @vport: The virtual port for which this call being executed.
+ * @num_to_allocate: The requested number of buffers to allocate.
+ *
+ * This routine allocates nvme buffers for device with SLI-4 interface spec,
+ * the nvme buffer contains all the necessary information needed to initiate
+ * an I/O. After allocating up to @num_to_allocate IO buffers and put
+ * them on a list, it post them to the port by using SGL block post.
+ *
+ * Return codes:
+ * int - number of nvme buffers that were allocated and posted.
+ * 0 = failure, less than num_to_alloc is a partial failure.
+ **/
+int
+lpfc_new_common_buf(struct lpfc_hba *phba, int num_to_alloc)
+{
+ struct lpfc_nvme_buf *lpfc_ncmd;
+ struct lpfc_iocbq *pwqeq;
+ uint16_t iotag, lxri = 0;
+ int bcnt, num_posted;
+ LIST_HEAD(prep_nblist);
+ LIST_HEAD(post_nblist);
+ LIST_HEAD(nvme_nblist);
+
+ /* Sanity check to ensure our sizing is right for both SCSI and NVME */
+ if ((sizeof(struct lpfc_scsi_buf) > LPFC_COMMON_IO_BUF_SZ) ||
+ (sizeof(struct lpfc_nvme_buf) > LPFC_COMMON_IO_BUF_SZ)) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_FCP,
+ "6426 Common buffer size mismatch: %ld %ld\n",
+ sizeof(struct lpfc_scsi_buf),
+ sizeof(struct lpfc_nvme_buf));
+ return 0;
+ }
+
+ for (bcnt = 0; bcnt < num_to_alloc; bcnt++) {
+ lpfc_ncmd = kzalloc(LPFC_COMMON_IO_BUF_SZ, GFP_KERNEL);
+ if (!lpfc_ncmd)
+ break;
+ /*
+ * Get memory from the pci pool to map the virt space to
+ * pci bus space for an I/O. The DMA buffer includes the
+ * number of SGE's necessary to support the sg_tablesize.
+ */
+ lpfc_ncmd->data = dma_pool_alloc(phba->lpfc_sg_dma_buf_pool,
+ GFP_KERNEL,
+ &lpfc_ncmd->dma_handle);
+ if (!lpfc_ncmd->data) {
+ kfree(lpfc_ncmd);
+ break;
+ }
+ memset(lpfc_ncmd->data, 0, phba->cfg_sg_dma_buf_size);
+
+ /*
+ * 4K Page alignment is CRITICAL to BlockGuard, double check
+ * to be sure.
+ */
+ if ((phba->sli3_options & LPFC_SLI3_BG_ENABLED) &&
+ (((unsigned long)(lpfc_ncmd->data) &
+ (unsigned long)(SLI4_PAGE_SIZE - 1)) != 0)) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_FCP,
+ "3369 Memory alignment err: addr=%lx\n",
+ (unsigned long)lpfc_ncmd->data);
+ dma_pool_free(phba->lpfc_sg_dma_buf_pool,
+ lpfc_ncmd->data, lpfc_ncmd->dma_handle);
+ kfree(lpfc_ncmd);
+ break;
+ }
+
+ lxri = lpfc_sli4_next_xritag(phba);
+ if (lxri == NO_XRI) {
+ dma_pool_free(phba->lpfc_sg_dma_buf_pool,
+ lpfc_ncmd->data, lpfc_ncmd->dma_handle);
+ kfree(lpfc_ncmd);
+ break;
+ }
+ pwqeq = &lpfc_ncmd->cur_iocbq;
+
+ /* Allocate iotag for lpfc_ncmd->cur_iocbq. */
+ iotag = lpfc_sli_next_iotag(phba, pwqeq);
+ if (iotag == 0) {
+ dma_pool_free(phba->lpfc_sg_dma_buf_pool,
+ lpfc_ncmd->data, lpfc_ncmd->dma_handle);
+ kfree(lpfc_ncmd);
+ lpfc_printf_log(phba, KERN_ERR, LOG_NVME_IOERR,
+ "6121 Failed to allocate IOTAG for"
+ " XRI:0x%x\n", lxri);
+ lpfc_sli4_free_xri(phba, lxri);
+ break;
+ }
+ pwqeq->sli4_lxritag = lxri;
+ pwqeq->sli4_xritag = phba->sli4_hba.xri_ids[lxri];
+ pwqeq->context1 = lpfc_ncmd;
+
+ /* Initialize local short-hand pointers. */
+ lpfc_ncmd->dma_sgl = lpfc_ncmd->data;
+ lpfc_ncmd->dma_phys_sgl = lpfc_ncmd->dma_handle;
+ lpfc_ncmd->cur_iocbq.context1 = lpfc_ncmd;
+
+ /* add the nvme buffer to a post list */
+ list_add_tail(&lpfc_ncmd->list, &post_nblist);
+ spin_lock_irq(&phba->common_buf_list_get_lock);
+ phba->sli4_hba.common_xri_cnt++;
+ spin_unlock_irq(&phba->common_buf_list_get_lock);
+ }
+ lpfc_printf_log(phba, KERN_INFO, LOG_NVME,
+ "6114 Allocate %d out of %d requested new NVME "
+ "buffers\n", bcnt, num_to_alloc);
+
+ /* post the list of nvme buffer sgls to port if available */
+ if (!list_empty(&post_nblist))
+ num_posted = lpfc_sli4_post_common_sgl_list(
+ phba, &post_nblist, bcnt);
+ else
+ num_posted = 0;
+
+ return num_posted;
+}
+
static uint64_t
lpfc_get_wwpn(struct lpfc_hba *phba)
{
}
/**
- * lpfc_sli4_nvme_sgl_update - update xri-sgl sizing and mapping
- * @phba: pointer to lpfc hba data structure.
- *
- * This routine first calculates the sizes of the current els and allocated
- * scsi sgl lists, and then goes through all sgls to updates the physical
- * XRIs assigned due to port function reset. During port initialization, the
- * current els and allocated scsi sgl lists are 0s.
- *
- * Return codes
- * 0 - successful (for now, it always returns 0)
- **/
-int
-lpfc_sli4_nvme_sgl_update(struct lpfc_hba *phba)
-{
- struct lpfc_nvme_buf *lpfc_ncmd = NULL, *lpfc_ncmd_next = NULL;
- uint16_t i, lxri, els_xri_cnt;
- uint16_t nvme_xri_cnt, nvme_xri_max;
- LIST_HEAD(nvme_sgl_list);
- int rc, cnt;
-
- phba->total_nvme_bufs = 0;
- phba->get_nvme_bufs = 0;
- phba->put_nvme_bufs = 0;
-
- if (!(phba->cfg_enable_fc4_type & LPFC_ENABLE_NVME))
- return 0;
- /*
- * update on pci function's allocated nvme xri-sgl list
- */
-
- /* maximum number of xris available for nvme buffers */
- els_xri_cnt = lpfc_sli4_get_els_iocb_cnt(phba);
- nvme_xri_max = phba->sli4_hba.max_cfg_param.max_xri - els_xri_cnt;
- phba->sli4_hba.nvme_xri_max = nvme_xri_max;
- phba->sli4_hba.nvme_xri_max -= phba->sli4_hba.scsi_xri_max;
-
- lpfc_printf_log(phba, KERN_INFO, LOG_SLI,
- "6074 Current allocated NVME xri-sgl count:%d, "
- "maximum NVME xri count:%d\n",
- phba->sli4_hba.nvme_xri_cnt,
- phba->sli4_hba.nvme_xri_max);
-
- spin_lock_irq(&phba->nvme_buf_list_get_lock);
- spin_lock(&phba->nvme_buf_list_put_lock);
- list_splice_init(&phba->lpfc_nvme_buf_list_get, &nvme_sgl_list);
- list_splice(&phba->lpfc_nvme_buf_list_put, &nvme_sgl_list);
- cnt = phba->get_nvme_bufs + phba->put_nvme_bufs;
- phba->get_nvme_bufs = 0;
- phba->put_nvme_bufs = 0;
- spin_unlock(&phba->nvme_buf_list_put_lock);
- spin_unlock_irq(&phba->nvme_buf_list_get_lock);
-
- if (phba->sli4_hba.nvme_xri_cnt > phba->sli4_hba.nvme_xri_max) {
- /* max nvme xri shrunk below the allocated nvme buffers */
- spin_lock_irq(&phba->nvme_buf_list_get_lock);
- nvme_xri_cnt = phba->sli4_hba.nvme_xri_cnt -
- phba->sli4_hba.nvme_xri_max;
- spin_unlock_irq(&phba->nvme_buf_list_get_lock);
- /* release the extra allocated nvme buffers */
- for (i = 0; i < nvme_xri_cnt; i++) {
- list_remove_head(&nvme_sgl_list, lpfc_ncmd,
- struct lpfc_nvme_buf, list);
- if (lpfc_ncmd) {
- dma_pool_free(phba->lpfc_sg_dma_buf_pool,
- lpfc_ncmd->data,
- lpfc_ncmd->dma_handle);
- kfree(lpfc_ncmd);
- }
- }
- spin_lock_irq(&phba->nvme_buf_list_get_lock);
- phba->sli4_hba.nvme_xri_cnt -= nvme_xri_cnt;
- spin_unlock_irq(&phba->nvme_buf_list_get_lock);
- }
-
- /* update xris associated to remaining allocated nvme buffers */
- lpfc_ncmd = NULL;
- lpfc_ncmd_next = NULL;
- list_for_each_entry_safe(lpfc_ncmd, lpfc_ncmd_next,
- &nvme_sgl_list, list) {
- lxri = lpfc_sli4_next_xritag(phba);
- if (lxri == NO_XRI) {
- lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
- "6075 Failed to allocate xri for "
- "nvme buffer\n");
- rc = -ENOMEM;
- goto out_free_mem;
- }
- lpfc_ncmd->cur_iocbq.sli4_lxritag = lxri;
- lpfc_ncmd->cur_iocbq.sli4_xritag = phba->sli4_hba.xri_ids[lxri];
- }
- spin_lock_irq(&phba->nvme_buf_list_get_lock);
- spin_lock(&phba->nvme_buf_list_put_lock);
- list_splice_init(&nvme_sgl_list, &phba->lpfc_nvme_buf_list_get);
- phba->get_nvme_bufs = cnt;
- INIT_LIST_HEAD(&phba->lpfc_nvme_buf_list_put);
- spin_unlock(&phba->nvme_buf_list_put_lock);
- spin_unlock_irq(&phba->nvme_buf_list_get_lock);
- return 0;
-
-out_free_mem:
- lpfc_nvme_free(phba);
- return rc;
-}
-
-/**
* lpfc_create_port - Create an FC port
* @phba: pointer to lpfc hba data structure.
* @instance: a unique integer ID to this FC port.
"NVME" : " "),
(phba->nvmet_support ? "NVMET" : " "));
- if (phba->cfg_enable_fc4_type & LPFC_ENABLE_FCP) {
- /* Initialize the scsi buffer list used by driver for scsi IO */
- spin_lock_init(&phba->scsi_buf_list_get_lock);
- INIT_LIST_HEAD(&phba->lpfc_scsi_buf_list_get);
- spin_lock_init(&phba->scsi_buf_list_put_lock);
- INIT_LIST_HEAD(&phba->lpfc_scsi_buf_list_put);
- }
+ /* Initialize the IO buffer list used by driver for SLI3 SCSI */
+ spin_lock_init(&phba->scsi_buf_list_get_lock);
+ INIT_LIST_HEAD(&phba->lpfc_scsi_buf_list_get);
+ spin_lock_init(&phba->scsi_buf_list_put_lock);
+ INIT_LIST_HEAD(&phba->lpfc_scsi_buf_list_put);
- if ((phba->cfg_enable_fc4_type & LPFC_ENABLE_NVME) &&
- (phba->nvmet_support == 0)) {
- /* Initialize the NVME buffer list used by driver for NVME IO */
- spin_lock_init(&phba->nvme_buf_list_get_lock);
- INIT_LIST_HEAD(&phba->lpfc_nvme_buf_list_get);
- phba->get_nvme_bufs = 0;
- spin_lock_init(&phba->nvme_buf_list_put_lock);
- INIT_LIST_HEAD(&phba->lpfc_nvme_buf_list_put);
- phba->put_nvme_bufs = 0;
- }
+ /* Initialize the IO buffer list used by driver for SLI4 SCSI/NVME */
+ spin_lock_init(&phba->common_buf_list_get_lock);
+ INIT_LIST_HEAD(&phba->lpfc_common_buf_list_get);
+ phba->get_common_bufs = 0;
+ spin_lock_init(&phba->common_buf_list_put_lock);
+ INIT_LIST_HEAD(&phba->lpfc_common_buf_list_put);
+ phba->put_common_bufs = 0;
/* Initialize the fabric iocb list */
INIT_LIST_HEAD(&phba->fabric_iocb_list);
static int
lpfc_sli_driver_resource_setup(struct lpfc_hba *phba)
{
- int rc;
+ int rc, entry_sz;
/*
* Initialize timers used by driver
lpfc_template_no_hr.sg_tablesize = phba->cfg_sg_seg_cnt;
lpfc_template.sg_tablesize = phba->cfg_sg_seg_cnt;
+ if (phba->sli_rev == LPFC_SLI_REV4)
+ entry_sz = sizeof(struct sli4_sge);
+ else
+ entry_sz = sizeof(struct ulp_bde64);
+
/* There are going to be 2 reserved BDEs: 1 FCP cmnd + 1 FCP rsp */
if (phba->cfg_enable_bg) {
/*
*/
phba->cfg_sg_dma_buf_size = sizeof(struct fcp_cmnd) +
sizeof(struct fcp_rsp) +
- (LPFC_MAX_SG_SEG_CNT * sizeof(struct ulp_bde64));
+ (LPFC_MAX_SG_SEG_CNT * entry_sz);
if (phba->cfg_sg_seg_cnt > LPFC_MAX_SG_SEG_CNT_DIF)
phba->cfg_sg_seg_cnt = LPFC_MAX_SG_SEG_CNT_DIF;
*/
phba->cfg_sg_dma_buf_size = sizeof(struct fcp_cmnd) +
sizeof(struct fcp_rsp) +
- ((phba->cfg_sg_seg_cnt + 2) * sizeof(struct ulp_bde64));
+ ((phba->cfg_sg_seg_cnt + 2) * entry_sz);
/* Total BDEs in BPL for scsi_sg_list */
phba->cfg_total_seg_cnt = phba->cfg_sg_seg_cnt + 2;
/* els xri-sgl book keeping */
phba->sli4_hba.els_xri_cnt = 0;
- /* scsi xri-buffer book keeping */
- phba->sli4_hba.scsi_xri_cnt = 0;
-
/* nvme xri-buffer book keeping */
- phba->sli4_hba.nvme_xri_cnt = 0;
+ phba->sli4_hba.common_xri_cnt = 0;
}
/**
lpfc_sli4_xri_exchange_busy_wait(struct lpfc_hba *phba)
{
int wait_time = 0;
- int nvme_xri_cmpl = 1;
+ int common_xri_cmpl = 1;
int nvmet_xri_cmpl = 1;
int fcp_xri_cmpl = 1;
int els_xri_cmpl = list_empty(&phba->sli4_hba.lpfc_abts_els_sgl_list);
fcp_xri_cmpl =
list_empty(&phba->sli4_hba.lpfc_abts_scsi_buf_list);
if (phba->cfg_enable_fc4_type & LPFC_ENABLE_NVME) {
- nvme_xri_cmpl =
+ common_xri_cmpl =
list_empty(&phba->sli4_hba.lpfc_abts_nvme_buf_list);
nvmet_xri_cmpl =
list_empty(&phba->sli4_hba.lpfc_abts_nvmet_ctx_list);
}
- while (!fcp_xri_cmpl || !els_xri_cmpl || !nvme_xri_cmpl ||
+ while (!fcp_xri_cmpl || !els_xri_cmpl || !common_xri_cmpl ||
!nvmet_xri_cmpl) {
if (wait_time > LPFC_XRI_EXCH_BUSY_WAIT_TMO) {
if (!nvmet_xri_cmpl)
"6424 NVMET XRI exchange busy "
"wait time: %d seconds.\n",
wait_time/1000);
- if (!nvme_xri_cmpl)
+ if (!common_xri_cmpl)
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
"6100 NVME XRI exchange busy "
"wait time: %d seconds.\n",
wait_time += LPFC_XRI_EXCH_BUSY_WAIT_T1;
}
if (phba->cfg_enable_fc4_type & LPFC_ENABLE_NVME) {
- nvme_xri_cmpl = list_empty(
+ common_xri_cmpl = list_empty(
&phba->sli4_hba.lpfc_abts_nvme_buf_list);
nvmet_xri_cmpl = list_empty(
&phba->sli4_hba.lpfc_abts_nvmet_ctx_list);
* corresponding pools here.
*/
lpfc_scsi_free(phba);
+ lpfc_free_iocb_list(phba);
+
lpfc_mem_free_all(phba);
dma_free_coherent(&pdev->dev, lpfc_sli_hbq_size(),
struct lpfc_hba *phba;
struct lpfc_vport *vport = NULL;
struct Scsi_Host *shost = NULL;
- int error;
+ int error, len;
uint32_t cfg_mode, intr_mode;
/* Allocate memory for HBA structure */
/* NVME support in FW earlier in the driver load corrects the
* FC4 type making a check for nvme_support unnecessary.
*/
- if ((phba->nvmet_support == 0) &&
- (phba->cfg_enable_fc4_type & LPFC_ENABLE_NVME)) {
- /* Create NVME binding with nvme_fc_transport. This
- * ensures the vport is initialized. If the localport
- * create fails, it should not unload the driver to
- * support field issues.
+ if (phba->nvmet_support == 0) {
+ if (phba->cfg_enable_fc4_type & LPFC_ENABLE_NVME) {
+ /* Create NVME binding with nvme_fc_transport. This
+ * ensures the vport is initialized. If the localport
+ * create fails, it should not unload the driver to
+ * support field issues.
+ */
+ error = lpfc_nvme_create_localport(vport);
+ if (error) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "6004 NVME registration "
+ "failed, error x%x\n",
+ error);
+ }
+ }
+ /* Don't post more new bufs if repost already recovered
+ * the nvme sgls.
*/
- error = lpfc_nvme_create_localport(vport);
- if (error) {
- lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
- "6004 NVME registration failed, "
- "error x%x\n",
- error);
+ if (phba->sli4_hba.common_xri_cnt == 0) {
+ len = lpfc_new_common_buf(
+ phba, phba->sli4_hba.common_xri_max);
+ if (len == 0) {
+ error = -ENOMEM;
+ goto out_disable_intr;
+ }
+ phba->total_common_bufs += len;
}
}
/* Perform scsi free before driver resource_unset since scsi
* buffers are released to their corresponding pools here.
*/
- lpfc_scsi_free(phba);
- lpfc_nvme_free(phba);
+ lpfc_common_free(phba);
lpfc_free_iocb_list(phba);
lpfc_unset_driver_resource_phase2(phba);
* rather than the virtual memory to ease the restore
* operation.
*/
- sgl = lpfc_ncmd->nvme_sgl;
+ sgl = lpfc_ncmd->dma_sgl;
sgl->sge_len = cpu_to_le32(nCmd->cmdlen);
if (phba->cfg_nvme_embed_cmd) {
sgl->addr_hi = 0;
struct lpfc_hba *phba = vport->phba;
struct nvmefc_fcp_req *nCmd = lpfc_ncmd->nvmeCmd;
union lpfc_wqe128 *wqe = &lpfc_ncmd->cur_iocbq.wqe;
- struct sli4_sge *sgl = lpfc_ncmd->nvme_sgl;
+ struct sli4_sge *sgl = lpfc_ncmd->dma_sgl;
struct scatterlist *data_sg;
struct sli4_sge *first_data_sgl;
struct ulp_bde64 *bde;
}
} else {
+ lpfc_ncmd->seg_cnt = 0;
+
/* For this clause to be valid, the payload_length
* and sg_cnt must zero.
*/
freqpriv->nvme_buf = lpfc_ncmd;
lpfc_ncmd->nvmeCmd = pnvme_fcreq;
lpfc_ncmd->ndlp = ndlp;
- lpfc_ncmd->start_time = jiffies;
+ lpfc_ncmd->qidx = lpfc_queue_info->qidx;
/*
* Issue the IO on the WQ indicated by index in the hw_queue_handle.
.fcprqst_priv_sz = sizeof(struct lpfc_nvme_fcpreq_priv),
};
-/**
- * lpfc_sli4_post_nvme_sgl_block - post a block of nvme sgl list to firmware
- * @phba: pointer to lpfc hba data structure.
- * @nblist: pointer to nvme buffer list.
- * @count: number of scsi buffers on the list.
- *
- * This routine is invoked to post a block of @count scsi sgl pages from a
- * SCSI buffer list @nblist to the HBA using non-embedded mailbox command.
- * No Lock is held.
- *
- **/
-static int
-lpfc_sli4_post_nvme_sgl_block(struct lpfc_hba *phba,
- struct list_head *nblist,
- int count)
-{
- struct lpfc_nvme_buf *lpfc_ncmd;
- struct lpfc_mbx_post_uembed_sgl_page1 *sgl;
- struct sgl_page_pairs *sgl_pg_pairs;
- void *viraddr;
- LPFC_MBOXQ_t *mbox;
- uint32_t reqlen, alloclen, pg_pairs;
- uint32_t mbox_tmo;
- uint16_t xritag_start = 0;
- int rc = 0;
- uint32_t shdr_status, shdr_add_status;
- dma_addr_t pdma_phys_bpl1;
- union lpfc_sli4_cfg_shdr *shdr;
-
- /* Calculate the requested length of the dma memory */
- reqlen = count * sizeof(struct sgl_page_pairs) +
- sizeof(union lpfc_sli4_cfg_shdr) + sizeof(uint32_t);
- if (reqlen > SLI4_PAGE_SIZE) {
- lpfc_printf_log(phba, KERN_WARNING, LOG_INIT,
- "6118 Block sgl registration required DMA "
- "size (%d) great than a page\n", reqlen);
- return -ENOMEM;
- }
- mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
- if (!mbox) {
- lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
- "6119 Failed to allocate mbox cmd memory\n");
- return -ENOMEM;
- }
-
- /* Allocate DMA memory and set up the non-embedded mailbox command */
- alloclen = lpfc_sli4_config(phba, mbox, LPFC_MBOX_SUBSYSTEM_FCOE,
- LPFC_MBOX_OPCODE_FCOE_POST_SGL_PAGES, reqlen,
- LPFC_SLI4_MBX_NEMBED);
-
- if (alloclen < reqlen) {
- lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
- "6120 Allocated DMA memory size (%d) is "
- "less than the requested DMA memory "
- "size (%d)\n", alloclen, reqlen);
- lpfc_sli4_mbox_cmd_free(phba, mbox);
- return -ENOMEM;
- }
-
- /* Get the first SGE entry from the non-embedded DMA memory */
- viraddr = mbox->sge_array->addr[0];
-
- /* Set up the SGL pages in the non-embedded DMA pages */
- sgl = (struct lpfc_mbx_post_uembed_sgl_page1 *)viraddr;
- sgl_pg_pairs = &sgl->sgl_pg_pairs;
-
- pg_pairs = 0;
- list_for_each_entry(lpfc_ncmd, nblist, list) {
- /* Set up the sge entry */
- sgl_pg_pairs->sgl_pg0_addr_lo =
- cpu_to_le32(putPaddrLow(lpfc_ncmd->dma_phys_sgl));
- sgl_pg_pairs->sgl_pg0_addr_hi =
- cpu_to_le32(putPaddrHigh(lpfc_ncmd->dma_phys_sgl));
- if (phba->cfg_sg_dma_buf_size > SGL_PAGE_SIZE)
- pdma_phys_bpl1 = lpfc_ncmd->dma_phys_sgl +
- SGL_PAGE_SIZE;
- else
- pdma_phys_bpl1 = 0;
- sgl_pg_pairs->sgl_pg1_addr_lo =
- cpu_to_le32(putPaddrLow(pdma_phys_bpl1));
- sgl_pg_pairs->sgl_pg1_addr_hi =
- cpu_to_le32(putPaddrHigh(pdma_phys_bpl1));
- /* Keep the first xritag on the list */
- if (pg_pairs == 0)
- xritag_start = lpfc_ncmd->cur_iocbq.sli4_xritag;
- sgl_pg_pairs++;
- pg_pairs++;
- }
- bf_set(lpfc_post_sgl_pages_xri, sgl, xritag_start);
- bf_set(lpfc_post_sgl_pages_xricnt, sgl, pg_pairs);
- /* Perform endian conversion if necessary */
- sgl->word0 = cpu_to_le32(sgl->word0);
-
- if (!phba->sli4_hba.intr_enable)
- rc = lpfc_sli_issue_mbox(phba, mbox, MBX_POLL);
- else {
- mbox_tmo = lpfc_mbox_tmo_val(phba, mbox);
- rc = lpfc_sli_issue_mbox_wait(phba, mbox, mbox_tmo);
- }
- shdr = (union lpfc_sli4_cfg_shdr *)&sgl->cfg_shdr;
- shdr_status = bf_get(lpfc_mbox_hdr_status, &shdr->response);
- shdr_add_status = bf_get(lpfc_mbox_hdr_add_status, &shdr->response);
- if (rc != MBX_TIMEOUT)
- lpfc_sli4_mbox_cmd_free(phba, mbox);
- if (shdr_status || shdr_add_status || rc) {
- lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
- "6125 POST_SGL_BLOCK mailbox command failed "
- "status x%x add_status x%x mbx status x%x\n",
- shdr_status, shdr_add_status, rc);
- rc = -ENXIO;
- }
- return rc;
-}
-
-/**
- * lpfc_post_nvme_sgl_list - Post blocks of nvme buffer sgls from a list
- * @phba: pointer to lpfc hba data structure.
- * @post_nblist: pointer to the nvme buffer list.
- *
- * This routine walks a list of nvme buffers that was passed in. It attempts
- * to construct blocks of nvme buffer sgls which contains contiguous xris and
- * uses the non-embedded SGL block post mailbox commands to post to the port.
- * For single NVME buffer sgl with non-contiguous xri, if any, it shall use
- * embedded SGL post mailbox command for posting. The @post_nblist passed in
- * must be local list, thus no lock is needed when manipulate the list.
- *
- * Returns: 0 = failure, non-zero number of successfully posted buffers.
- **/
-static int
-lpfc_post_nvme_sgl_list(struct lpfc_hba *phba,
- struct list_head *post_nblist, int sb_count)
-{
- struct lpfc_nvme_buf *lpfc_ncmd, *lpfc_ncmd_next;
- int status, sgl_size;
- int post_cnt = 0, block_cnt = 0, num_posting = 0, num_posted = 0;
- dma_addr_t pdma_phys_sgl1;
- int last_xritag = NO_XRI;
- int cur_xritag;
- LIST_HEAD(prep_nblist);
- LIST_HEAD(blck_nblist);
- LIST_HEAD(nvme_nblist);
-
- /* sanity check */
- if (sb_count <= 0)
- return -EINVAL;
-
- sgl_size = phba->cfg_sg_dma_buf_size;
-
- list_for_each_entry_safe(lpfc_ncmd, lpfc_ncmd_next, post_nblist, list) {
- list_del_init(&lpfc_ncmd->list);
- block_cnt++;
- if ((last_xritag != NO_XRI) &&
- (lpfc_ncmd->cur_iocbq.sli4_xritag != last_xritag + 1)) {
- /* a hole in xri block, form a sgl posting block */
- list_splice_init(&prep_nblist, &blck_nblist);
- post_cnt = block_cnt - 1;
- /* prepare list for next posting block */
- list_add_tail(&lpfc_ncmd->list, &prep_nblist);
- block_cnt = 1;
- } else {
- /* prepare list for next posting block */
- list_add_tail(&lpfc_ncmd->list, &prep_nblist);
- /* enough sgls for non-embed sgl mbox command */
- if (block_cnt == LPFC_NEMBED_MBOX_SGL_CNT) {
- list_splice_init(&prep_nblist, &blck_nblist);
- post_cnt = block_cnt;
- block_cnt = 0;
- }
- }
- num_posting++;
- last_xritag = lpfc_ncmd->cur_iocbq.sli4_xritag;
-
- /* end of repost sgl list condition for NVME buffers */
- if (num_posting == sb_count) {
- if (post_cnt == 0) {
- /* last sgl posting block */
- list_splice_init(&prep_nblist, &blck_nblist);
- post_cnt = block_cnt;
- } else if (block_cnt == 1) {
- /* last single sgl with non-contiguous xri */
- if (sgl_size > SGL_PAGE_SIZE)
- pdma_phys_sgl1 =
- lpfc_ncmd->dma_phys_sgl +
- SGL_PAGE_SIZE;
- else
- pdma_phys_sgl1 = 0;
- cur_xritag = lpfc_ncmd->cur_iocbq.sli4_xritag;
- status = lpfc_sli4_post_sgl(phba,
- lpfc_ncmd->dma_phys_sgl,
- pdma_phys_sgl1, cur_xritag);
- if (status) {
- /* failure, put on abort nvme list */
- lpfc_ncmd->flags |= LPFC_SBUF_XBUSY;
- } else {
- /* success, put on NVME buffer list */
- lpfc_ncmd->flags &= ~LPFC_SBUF_XBUSY;
- lpfc_ncmd->status = IOSTAT_SUCCESS;
- num_posted++;
- }
- /* success, put on NVME buffer sgl list */
- list_add_tail(&lpfc_ncmd->list, &nvme_nblist);
- }
- }
-
- /* continue until a nembed page worth of sgls */
- if (post_cnt == 0)
- continue;
-
- /* post block of NVME buffer list sgls */
- status = lpfc_sli4_post_nvme_sgl_block(phba, &blck_nblist,
- post_cnt);
-
- /* don't reset xirtag due to hole in xri block */
- if (block_cnt == 0)
- last_xritag = NO_XRI;
-
- /* reset NVME buffer post count for next round of posting */
- post_cnt = 0;
-
- /* put posted NVME buffer-sgl posted on NVME buffer sgl list */
- while (!list_empty(&blck_nblist)) {
- list_remove_head(&blck_nblist, lpfc_ncmd,
- struct lpfc_nvme_buf, list);
- if (status) {
- /* failure, put on abort nvme list */
- lpfc_ncmd->flags |= LPFC_SBUF_XBUSY;
- } else {
- /* success, put on NVME buffer list */
- lpfc_ncmd->flags &= ~LPFC_SBUF_XBUSY;
- lpfc_ncmd->status = IOSTAT_SUCCESS;
- num_posted++;
- }
- list_add_tail(&lpfc_ncmd->list, &nvme_nblist);
- }
- }
- /* Push NVME buffers with sgl posted to the available list */
- while (!list_empty(&nvme_nblist)) {
- list_remove_head(&nvme_nblist, lpfc_ncmd,
- struct lpfc_nvme_buf, list);
- lpfc_release_nvme_buf(phba, lpfc_ncmd);
- }
- return num_posted;
-}
-
-/**
- * lpfc_repost_nvme_sgl_list - Repost all the allocated nvme buffer sgls
- * @phba: pointer to lpfc hba data structure.
- *
- * This routine walks the list of nvme buffers that have been allocated and
- * repost them to the port by using SGL block post. This is needed after a
- * pci_function_reset/warm_start or start. The lpfc_hba_down_post_s4 routine
- * is responsible for moving all nvme buffers on the lpfc_abts_nvme_sgl_list
- * to the lpfc_nvme_buf_list. If the repost fails, reject all nvme buffers.
- *
- * Returns: 0 = success, non-zero failure.
- **/
-int
-lpfc_repost_nvme_sgl_list(struct lpfc_hba *phba)
-{
- LIST_HEAD(post_nblist);
- int num_posted, rc = 0;
-
- /* get all NVME buffers need to repost to a local list */
- spin_lock_irq(&phba->nvme_buf_list_get_lock);
- spin_lock(&phba->nvme_buf_list_put_lock);
- list_splice_init(&phba->lpfc_nvme_buf_list_get, &post_nblist);
- list_splice(&phba->lpfc_nvme_buf_list_put, &post_nblist);
- phba->get_nvme_bufs = 0;
- phba->put_nvme_bufs = 0;
- spin_unlock(&phba->nvme_buf_list_put_lock);
- spin_unlock_irq(&phba->nvme_buf_list_get_lock);
-
- /* post the list of nvme buffer sgls to port if available */
- if (!list_empty(&post_nblist)) {
- num_posted = lpfc_post_nvme_sgl_list(phba, &post_nblist,
- phba->sli4_hba.nvme_xri_cnt);
- /* failed to post any nvme buffer, return error */
- if (num_posted == 0)
- rc = -EIO;
- }
- return rc;
-}
-
-/**
- * lpfc_new_nvme_buf - Scsi buffer allocator for HBA with SLI4 IF spec
- * @vport: The virtual port for which this call being executed.
- * @num_to_allocate: The requested number of buffers to allocate.
- *
- * This routine allocates nvme buffers for device with SLI-4 interface spec,
- * the nvme buffer contains all the necessary information needed to initiate
- * a NVME I/O. After allocating up to @num_to_allocate NVME buffers and put
- * them on a list, it post them to the port by using SGL block post.
- *
- * Return codes:
- * int - number of nvme buffers that were allocated and posted.
- * 0 = failure, less than num_to_alloc is a partial failure.
- **/
-static int
-lpfc_new_nvme_buf(struct lpfc_vport *vport, int num_to_alloc)
-{
- struct lpfc_hba *phba = vport->phba;
- struct lpfc_nvme_buf *lpfc_ncmd;
- struct lpfc_iocbq *pwqeq;
- union lpfc_wqe128 *wqe;
- struct sli4_sge *sgl;
- dma_addr_t pdma_phys_sgl;
- uint16_t iotag, lxri = 0;
- int bcnt, num_posted;
- LIST_HEAD(prep_nblist);
- LIST_HEAD(post_nblist);
- LIST_HEAD(nvme_nblist);
-
- for (bcnt = 0; bcnt < num_to_alloc; bcnt++) {
- lpfc_ncmd = kzalloc(sizeof(struct lpfc_nvme_buf), GFP_KERNEL);
- if (!lpfc_ncmd)
- break;
- /*
- * Get memory from the pci pool to map the virt space to
- * pci bus space for an I/O. The DMA buffer includes the
- * number of SGE's necessary to support the sg_tablesize.
- */
- lpfc_ncmd->data = dma_pool_zalloc(phba->lpfc_sg_dma_buf_pool,
- GFP_KERNEL,
- &lpfc_ncmd->dma_handle);
- if (!lpfc_ncmd->data) {
- kfree(lpfc_ncmd);
- break;
- }
-
- lxri = lpfc_sli4_next_xritag(phba);
- if (lxri == NO_XRI) {
- dma_pool_free(phba->lpfc_sg_dma_buf_pool,
- lpfc_ncmd->data, lpfc_ncmd->dma_handle);
- kfree(lpfc_ncmd);
- break;
- }
- pwqeq = &(lpfc_ncmd->cur_iocbq);
- wqe = &pwqeq->wqe;
-
- /* Allocate iotag for lpfc_ncmd->cur_iocbq. */
- iotag = lpfc_sli_next_iotag(phba, pwqeq);
- if (iotag == 0) {
- dma_pool_free(phba->lpfc_sg_dma_buf_pool,
- lpfc_ncmd->data, lpfc_ncmd->dma_handle);
- kfree(lpfc_ncmd);
- lpfc_printf_log(phba, KERN_ERR, LOG_NVME_IOERR,
- "6121 Failed to allocated IOTAG for"
- " XRI:0x%x\n", lxri);
- lpfc_sli4_free_xri(phba, lxri);
- break;
- }
- pwqeq->sli4_lxritag = lxri;
- pwqeq->sli4_xritag = phba->sli4_hba.xri_ids[lxri];
- pwqeq->iocb_flag |= LPFC_IO_NVME;
- pwqeq->context1 = lpfc_ncmd;
- pwqeq->wqe_cmpl = lpfc_nvme_io_cmd_wqe_cmpl;
-
- /* Initialize local short-hand pointers. */
- lpfc_ncmd->nvme_sgl = lpfc_ncmd->data;
- sgl = lpfc_ncmd->nvme_sgl;
- pdma_phys_sgl = lpfc_ncmd->dma_handle;
- lpfc_ncmd->dma_phys_sgl = pdma_phys_sgl;
-
- /* Rsp SGE will be filled in when we rcv an IO
- * from the NVME Layer to be sent.
- * The cmd is going to be embedded so we need a SKIP SGE.
- */
- bf_set(lpfc_sli4_sge_type, sgl, LPFC_SGE_TYPE_SKIP);
- bf_set(lpfc_sli4_sge_last, sgl, 0);
- sgl->word2 = cpu_to_le32(sgl->word2);
- /* Fill in word 3 / sgl_len during cmd submission */
-
- lpfc_ncmd->cur_iocbq.context1 = lpfc_ncmd;
-
- /* Initialize WQE */
- memset(wqe, 0, sizeof(union lpfc_wqe));
-
- /* add the nvme buffer to a post list */
- list_add_tail(&lpfc_ncmd->list, &post_nblist);
- spin_lock_irq(&phba->nvme_buf_list_get_lock);
- phba->sli4_hba.nvme_xri_cnt++;
- spin_unlock_irq(&phba->nvme_buf_list_get_lock);
- }
- lpfc_printf_log(phba, KERN_INFO, LOG_NVME,
- "6114 Allocate %d out of %d requested new NVME "
- "buffers\n", bcnt, num_to_alloc);
-
- /* post the list of nvme buffer sgls to port if available */
- if (!list_empty(&post_nblist))
- num_posted = lpfc_post_nvme_sgl_list(phba,
- &post_nblist, bcnt);
- else
- num_posted = 0;
-
- return num_posted;
-}
-
static inline struct lpfc_nvme_buf *
lpfc_nvme_buf(struct lpfc_hba *phba)
{
struct lpfc_nvme_buf *lpfc_ncmd, *lpfc_ncmd_next;
list_for_each_entry_safe(lpfc_ncmd, lpfc_ncmd_next,
- &phba->lpfc_nvme_buf_list_get, list) {
+ &phba->lpfc_common_buf_list_get, list) {
list_del_init(&lpfc_ncmd->list);
- phba->get_nvme_bufs--;
+ phba->get_common_bufs--;
return lpfc_ncmd;
}
return NULL;
}
/**
- * lpfc_get_nvme_buf - Get a nvme buffer from lpfc_nvme_buf_list of the HBA
+ * lpfc_get_nvme_buf - Get a nvme buffer from lpfc_common_buf_list of the HBA
* @phba: The HBA for which this call is being executed.
*
- * This routine removes a nvme buffer from head of @phba lpfc_nvme_buf_list list
+ * This routine removes a nvme buffer from head of @phba lpfc_common_buf_list
* and returns to caller.
*
* Return codes:
int expedite)
{
struct lpfc_nvme_buf *lpfc_ncmd = NULL;
+ struct sli4_sge *sgl;
+ struct lpfc_iocbq *pwqeq;
+ union lpfc_wqe128 *wqe;
unsigned long iflag = 0;
- spin_lock_irqsave(&phba->nvme_buf_list_get_lock, iflag);
- if (phba->get_nvme_bufs > LPFC_NVME_EXPEDITE_XRICNT || expedite)
+ spin_lock_irqsave(&phba->common_buf_list_get_lock, iflag);
+ if (phba->get_common_bufs > LPFC_NVME_EXPEDITE_XRICNT || expedite)
lpfc_ncmd = lpfc_nvme_buf(phba);
if (!lpfc_ncmd) {
- spin_lock(&phba->nvme_buf_list_put_lock);
- list_splice(&phba->lpfc_nvme_buf_list_put,
- &phba->lpfc_nvme_buf_list_get);
- phba->get_nvme_bufs += phba->put_nvme_bufs;
- INIT_LIST_HEAD(&phba->lpfc_nvme_buf_list_put);
- phba->put_nvme_bufs = 0;
- spin_unlock(&phba->nvme_buf_list_put_lock);
- if (phba->get_nvme_bufs > LPFC_NVME_EXPEDITE_XRICNT || expedite)
+ spin_lock(&phba->common_buf_list_put_lock);
+ list_splice(&phba->lpfc_common_buf_list_put,
+ &phba->lpfc_common_buf_list_get);
+ phba->get_common_bufs += phba->put_common_bufs;
+ INIT_LIST_HEAD(&phba->lpfc_common_buf_list_put);
+ phba->put_common_bufs = 0;
+ spin_unlock(&phba->common_buf_list_put_lock);
+ if (phba->get_common_bufs > LPFC_NVME_EXPEDITE_XRICNT ||
+ expedite)
lpfc_ncmd = lpfc_nvme_buf(phba);
}
- spin_unlock_irqrestore(&phba->nvme_buf_list_get_lock, iflag);
+ spin_unlock_irqrestore(&phba->common_buf_list_get_lock, iflag);
+
+ if (lpfc_ncmd) {
+ pwqeq = &(lpfc_ncmd->cur_iocbq);
+ wqe = &pwqeq->wqe;
+
+ /* Setup key fields in buffer that may have been changed
+ * if other protocols used this buffer.
+ */
+ pwqeq->iocb_flag = LPFC_IO_NVME;
+ pwqeq->wqe_cmpl = lpfc_nvme_io_cmd_wqe_cmpl;
+ lpfc_ncmd->start_time = jiffies;
+ lpfc_ncmd->flags = 0;
+
+ /* Rsp SGE will be filled in when we rcv an IO
+ * from the NVME Layer to be sent.
+ * The cmd is going to be embedded so we need a SKIP SGE.
+ */
+ sgl = lpfc_ncmd->dma_sgl;
+ bf_set(lpfc_sli4_sge_type, sgl, LPFC_SGE_TYPE_SKIP);
+ bf_set(lpfc_sli4_sge_last, sgl, 0);
+ sgl->word2 = cpu_to_le32(sgl->word2);
+ /* Fill in word 3 / sgl_len during cmd submission */
+
+ /* Initialize WQE */
+ memset(wqe, 0, sizeof(union lpfc_wqe));
- if (lpfc_ndlp_check_qdepth(phba, ndlp) && lpfc_ncmd) {
- atomic_inc(&ndlp->cmd_pending);
- lpfc_ncmd->flags |= LPFC_BUMP_QDEPTH;
+ if (lpfc_ndlp_check_qdepth(phba, ndlp)) {
+ atomic_inc(&ndlp->cmd_pending);
+ lpfc_ncmd->flags |= LPFC_BUMP_QDEPTH;
+ }
}
return lpfc_ncmd;
}
* @lpfc_ncmd: The nvme buffer which is being released.
*
* This routine releases @lpfc_ncmd nvme buffer by adding it to tail of @phba
- * lpfc_nvme_buf_list list. For SLI4 XRI's are tied to the nvme buffer
+ * lpfc_common_buf_list list. For SLI4 XRI's are tied to the nvme buffer
* and cannot be reused for at least RA_TOV amount of time if it was
* aborted.
**/
if ((lpfc_ncmd->flags & LPFC_BUMP_QDEPTH) && lpfc_ncmd->ndlp)
atomic_dec(&lpfc_ncmd->ndlp->cmd_pending);
- lpfc_ncmd->nonsg_phys = 0;
lpfc_ncmd->ndlp = NULL;
lpfc_ncmd->flags &= ~LPFC_BUMP_QDEPTH;
spin_unlock_irqrestore(&phba->sli4_hba.abts_nvme_buf_list_lock,
iflag);
} else {
+ /* MUST zero fields if buffer is reused by another protocol */
lpfc_ncmd->nvmeCmd = NULL;
- lpfc_ncmd->cur_iocbq.iocb_flag = LPFC_IO_NVME;
- spin_lock_irqsave(&phba->nvme_buf_list_put_lock, iflag);
- list_add_tail(&lpfc_ncmd->list, &phba->lpfc_nvme_buf_list_put);
- phba->put_nvme_bufs++;
- spin_unlock_irqrestore(&phba->nvme_buf_list_put_lock, iflag);
+ lpfc_ncmd->cur_iocbq.wqe_cmpl = NULL;
+ spin_lock_irqsave(&phba->common_buf_list_put_lock, iflag);
+ list_add_tail(&lpfc_ncmd->list,
+ &phba->lpfc_common_buf_list_put);
+ phba->put_common_bufs++;
+ spin_unlock_irqrestore(&phba->common_buf_list_put_lock, iflag);
}
}
struct nvme_fc_local_port *localport;
struct lpfc_nvme_lport *lport;
struct lpfc_nvme_ctrl_stat *cstat;
- int len, i;
+ int i;
/* Initialize this localport instance. The vport wwn usage ensures
* that NPIV is accounted for.
atomic_set(&cstat->fc4NvmeControlRequests, 0);
atomic_set(&cstat->fc4NvmeIoCmpls, 0);
}
-
- /* Don't post more new bufs if repost already recovered
- * the nvme sgls.
- */
- if (phba->sli4_hba.nvme_xri_cnt == 0) {
- len = lpfc_new_nvme_buf(vport,
- phba->sli4_hba.nvme_xri_max);
- vport->phba->total_nvme_bufs += len;
- }
- } else {
+ } else
kfree(cstat);
- }
return ret;
}
};
struct lpfc_nvme_buf {
+ /* Common fields */
struct list_head list;
+ void *data;
+ dma_addr_t dma_handle;
+ dma_addr_t dma_phys_sgl;
+ struct sli4_sge *dma_sgl;
+ struct lpfc_iocbq cur_iocbq;
+
+ /* NVME specific fields */
struct nvmefc_fcp_req *nvmeCmd;
struct lpfc_nodelist *ndlp;
#define LPFC_SBUF_XBUSY 0x1 /* SLI4 hba reported XB on WCQE cmpl */
#define LPFC_BUMP_QDEPTH 0x2 /* bumped queue depth counter */
uint16_t exch_busy; /* SLI4 hba reported XB on complete WCQE */
- uint16_t status; /* From IOCB Word 7- ulpStatus */
uint16_t cpu;
- uint16_t qidx;
- uint16_t sqid;
+ uint16_t status; /* From IOCB Word 7- ulpStatus */
uint32_t result; /* From IOCB Word 4. */
uint32_t seg_cnt; /* Number of scatter-gather segments returned by
* dma_map_sg. The driver needs this for calls
* to dma_unmap_sg.
*/
- dma_addr_t nonsg_phys; /* Non scatter-gather physical address. */
-
- /*
- * data and dma_handle are the kernel virtual and bus address of the
- * dma-able buffer containing the fcp_cmd, fcp_rsp and a scatter
- * gather bde list that supports the sg_tablesize value.
- */
- void *data;
- dma_addr_t dma_handle;
-
- struct sli4_sge *nvme_sgl;
- dma_addr_t dma_phys_sgl;
-
- /* cur_iocbq has phys of the dma-able buffer.
- * Iotag is in here
- */
- struct lpfc_iocbq cur_iocbq;
-
wait_queue_head_t *waitq;
unsigned long start_time;
+
+ uint16_t qidx;
+
#ifdef CONFIG_SCSI_LPFC_DEBUG_FS
uint64_t ts_cmd_start;
uint64_t ts_last_cmd;
lpfc_sli4_set_rsp_sgl_last(struct lpfc_hba *phba,
struct lpfc_scsi_buf *lpfc_cmd)
{
- struct sli4_sge *sgl = (struct sli4_sge *)lpfc_cmd->fcp_bpl;
+ struct sli4_sge *sgl = (struct sli4_sge *)lpfc_cmd->dma_sgl;
if (sgl) {
sgl += 1;
sgl->word2 = le32_to_cpu(sgl->word2);
IOCB_t *iocb;
dma_addr_t pdma_phys_fcp_cmd;
dma_addr_t pdma_phys_fcp_rsp;
- dma_addr_t pdma_phys_bpl;
+ dma_addr_t pdma_phys_sgl;
uint16_t iotag;
int bcnt, bpl_size;
psb->fcp_cmnd = psb->data;
psb->fcp_rsp = psb->data + sizeof(struct fcp_cmnd);
- psb->fcp_bpl = psb->data + sizeof(struct fcp_cmnd) +
+ psb->dma_sgl = psb->data + sizeof(struct fcp_cmnd) +
sizeof(struct fcp_rsp);
/* Initialize local short-hand pointers. */
- bpl = psb->fcp_bpl;
+ bpl = psb->dma_sgl;
pdma_phys_fcp_cmd = psb->dma_handle;
pdma_phys_fcp_rsp = psb->dma_handle + sizeof(struct fcp_cmnd);
- pdma_phys_bpl = psb->dma_handle + sizeof(struct fcp_cmnd) +
+ pdma_phys_sgl = psb->dma_handle + sizeof(struct fcp_cmnd) +
sizeof(struct fcp_rsp);
/*
iocb->un.fcpi64.bdl.bdeSize =
(2 * sizeof(struct ulp_bde64));
iocb->un.fcpi64.bdl.addrLow =
- putPaddrLow(pdma_phys_bpl);
+ putPaddrLow(pdma_phys_sgl);
iocb->un.fcpi64.bdl.addrHigh =
- putPaddrHigh(pdma_phys_bpl);
+ putPaddrHigh(pdma_phys_sgl);
iocb->ulpBdeCount = 1;
iocb->ulpLe = 1;
}
}
/**
- * lpfc_sli4_post_scsi_sgl_list - Post blocks of scsi buffer sgls from a list
- * @phba: pointer to lpfc hba data structure.
- * @post_sblist: pointer to the scsi buffer list.
- *
- * This routine walks a list of scsi buffers that was passed in. It attempts
- * to construct blocks of scsi buffer sgls which contains contiguous xris and
- * uses the non-embedded SGL block post mailbox commands to post to the port.
- * For single SCSI buffer sgl with non-contiguous xri, if any, it shall use
- * embedded SGL post mailbox command for posting. The @post_sblist passed in
- * must be local list, thus no lock is needed when manipulate the list.
- *
- * Returns: 0 = failure, non-zero number of successfully posted buffers.
- **/
-static int
-lpfc_sli4_post_scsi_sgl_list(struct lpfc_hba *phba,
- struct list_head *post_sblist, int sb_count)
-{
- struct lpfc_scsi_buf *psb, *psb_next;
- int status, sgl_size;
- int post_cnt = 0, block_cnt = 0, num_posting = 0, num_posted = 0;
- dma_addr_t pdma_phys_bpl1;
- int last_xritag = NO_XRI;
- LIST_HEAD(prep_sblist);
- LIST_HEAD(blck_sblist);
- LIST_HEAD(scsi_sblist);
-
- /* sanity check */
- if (sb_count <= 0)
- return -EINVAL;
-
- sgl_size = phba->cfg_sg_dma_buf_size -
- (sizeof(struct fcp_cmnd) + sizeof(struct fcp_rsp));
-
- list_for_each_entry_safe(psb, psb_next, post_sblist, list) {
- list_del_init(&psb->list);
- block_cnt++;
- if ((last_xritag != NO_XRI) &&
- (psb->cur_iocbq.sli4_xritag != last_xritag + 1)) {
- /* a hole in xri block, form a sgl posting block */
- list_splice_init(&prep_sblist, &blck_sblist);
- post_cnt = block_cnt - 1;
- /* prepare list for next posting block */
- list_add_tail(&psb->list, &prep_sblist);
- block_cnt = 1;
- } else {
- /* prepare list for next posting block */
- list_add_tail(&psb->list, &prep_sblist);
- /* enough sgls for non-embed sgl mbox command */
- if (block_cnt == LPFC_NEMBED_MBOX_SGL_CNT) {
- list_splice_init(&prep_sblist, &blck_sblist);
- post_cnt = block_cnt;
- block_cnt = 0;
- }
- }
- num_posting++;
- last_xritag = psb->cur_iocbq.sli4_xritag;
-
- /* end of repost sgl list condition for SCSI buffers */
- if (num_posting == sb_count) {
- if (post_cnt == 0) {
- /* last sgl posting block */
- list_splice_init(&prep_sblist, &blck_sblist);
- post_cnt = block_cnt;
- } else if (block_cnt == 1) {
- /* last single sgl with non-contiguous xri */
- if (sgl_size > SGL_PAGE_SIZE)
- pdma_phys_bpl1 = psb->dma_phys_bpl +
- SGL_PAGE_SIZE;
- else
- pdma_phys_bpl1 = 0;
- status = lpfc_sli4_post_sgl(phba,
- psb->dma_phys_bpl,
- pdma_phys_bpl1,
- psb->cur_iocbq.sli4_xritag);
- if (status) {
- /* failure, put on abort scsi list */
- psb->exch_busy = 1;
- } else {
- /* success, put on SCSI buffer list */
- psb->exch_busy = 0;
- psb->status = IOSTAT_SUCCESS;
- num_posted++;
- }
- /* success, put on SCSI buffer sgl list */
- list_add_tail(&psb->list, &scsi_sblist);
- }
- }
-
- /* continue until a nembed page worth of sgls */
- if (post_cnt == 0)
- continue;
-
- /* post block of SCSI buffer list sgls */
- status = lpfc_sli4_post_scsi_sgl_block(phba, &blck_sblist,
- post_cnt);
-
- /* don't reset xirtag due to hole in xri block */
- if (block_cnt == 0)
- last_xritag = NO_XRI;
-
- /* reset SCSI buffer post count for next round of posting */
- post_cnt = 0;
-
- /* put posted SCSI buffer-sgl posted on SCSI buffer sgl list */
- while (!list_empty(&blck_sblist)) {
- list_remove_head(&blck_sblist, psb,
- struct lpfc_scsi_buf, list);
- if (status) {
- /* failure, put on abort scsi list */
- psb->exch_busy = 1;
- } else {
- /* success, put on SCSI buffer list */
- psb->exch_busy = 0;
- psb->status = IOSTAT_SUCCESS;
- num_posted++;
- }
- list_add_tail(&psb->list, &scsi_sblist);
- }
- }
- /* Push SCSI buffers with sgl posted to the availble list */
- while (!list_empty(&scsi_sblist)) {
- list_remove_head(&scsi_sblist, psb,
- struct lpfc_scsi_buf, list);
- lpfc_release_scsi_buf_s4(phba, psb);
- }
- return num_posted;
-}
-
-/**
- * lpfc_sli4_repost_scsi_sgl_list - Repost all the allocated scsi buffer sgls
- * @phba: pointer to lpfc hba data structure.
- *
- * This routine walks the list of scsi buffers that have been allocated and
- * repost them to the port by using SGL block post. This is needed after a
- * pci_function_reset/warm_start or start. The lpfc_hba_down_post_s4 routine
- * is responsible for moving all scsi buffers on the lpfc_abts_scsi_sgl_list
- * to the lpfc_scsi_buf_list. If the repost fails, reject all scsi buffers.
- *
- * Returns: 0 = success, non-zero failure.
- **/
-int
-lpfc_sli4_repost_scsi_sgl_list(struct lpfc_hba *phba)
-{
- LIST_HEAD(post_sblist);
- int num_posted, rc = 0;
-
- /* get all SCSI buffers need to repost to a local list */
- spin_lock_irq(&phba->scsi_buf_list_get_lock);
- spin_lock(&phba->scsi_buf_list_put_lock);
- list_splice_init(&phba->lpfc_scsi_buf_list_get, &post_sblist);
- list_splice(&phba->lpfc_scsi_buf_list_put, &post_sblist);
- spin_unlock(&phba->scsi_buf_list_put_lock);
- spin_unlock_irq(&phba->scsi_buf_list_get_lock);
-
- /* post the list of scsi buffer sgls to port if available */
- if (!list_empty(&post_sblist)) {
- num_posted = lpfc_sli4_post_scsi_sgl_list(phba, &post_sblist,
- phba->sli4_hba.scsi_xri_cnt);
- /* failed to post any scsi buffer, return error */
- if (num_posted == 0)
- rc = -EIO;
- }
- return rc;
-}
-
-/**
- * lpfc_new_scsi_buf_s4 - Scsi buffer allocator for HBA with SLI4 IF spec
- * @vport: The virtual port for which this call being executed.
- * @num_to_allocate: The requested number of buffers to allocate.
- *
- * This routine allocates scsi buffers for device with SLI-4 interface spec,
- * the scsi buffer contains all the necessary information needed to initiate
- * a SCSI I/O. After allocating up to @num_to_allocate SCSI buffers and put
- * them on a list, it post them to the port by using SGL block post.
- *
- * Return codes:
- * int - number of scsi buffers that were allocated and posted.
- * 0 = failure, less than num_to_alloc is a partial failure.
- **/
-static int
-lpfc_new_scsi_buf_s4(struct lpfc_vport *vport, int num_to_alloc)
-{
- struct lpfc_hba *phba = vport->phba;
- struct lpfc_scsi_buf *psb;
- struct sli4_sge *sgl;
- IOCB_t *iocb;
- dma_addr_t pdma_phys_fcp_cmd;
- dma_addr_t pdma_phys_fcp_rsp;
- dma_addr_t pdma_phys_bpl;
- uint16_t iotag, lxri = 0;
- int bcnt, num_posted, sgl_size;
- LIST_HEAD(prep_sblist);
- LIST_HEAD(post_sblist);
- LIST_HEAD(scsi_sblist);
-
- sgl_size = phba->cfg_sg_dma_buf_size -
- (sizeof(struct fcp_cmnd) + sizeof(struct fcp_rsp));
-
- lpfc_printf_vlog(vport, KERN_INFO, LOG_FCP,
- "9068 ALLOC %d scsi_bufs: %d (%d + %d + %d)\n",
- num_to_alloc, phba->cfg_sg_dma_buf_size, sgl_size,
- (int)sizeof(struct fcp_cmnd),
- (int)sizeof(struct fcp_rsp));
-
- for (bcnt = 0; bcnt < num_to_alloc; bcnt++) {
- psb = kzalloc(sizeof(struct lpfc_scsi_buf), GFP_KERNEL);
- if (!psb)
- break;
- /*
- * Get memory from the pci pool to map the virt space to
- * pci bus space for an I/O. The DMA buffer includes space
- * for the struct fcp_cmnd, struct fcp_rsp and the number
- * of bde's necessary to support the sg_tablesize.
- */
- psb->data = dma_pool_zalloc(phba->lpfc_sg_dma_buf_pool,
- GFP_KERNEL, &psb->dma_handle);
- if (!psb->data) {
- kfree(psb);
- break;
- }
-
- /*
- * 4K Page alignment is CRITICAL to BlockGuard, double check
- * to be sure.
- */
- if ((phba->sli3_options & LPFC_SLI3_BG_ENABLED) &&
- (((unsigned long)(psb->data) &
- (unsigned long)(SLI4_PAGE_SIZE - 1)) != 0)) {
- lpfc_printf_log(phba, KERN_ERR, LOG_FCP,
- "3369 Memory alignment error "
- "addr=%lx\n",
- (unsigned long)psb->data);
- dma_pool_free(phba->lpfc_sg_dma_buf_pool,
- psb->data, psb->dma_handle);
- kfree(psb);
- break;
- }
-
-
- lxri = lpfc_sli4_next_xritag(phba);
- if (lxri == NO_XRI) {
- dma_pool_free(phba->lpfc_sg_dma_buf_pool,
- psb->data, psb->dma_handle);
- kfree(psb);
- break;
- }
-
- /* Allocate iotag for psb->cur_iocbq. */
- iotag = lpfc_sli_next_iotag(phba, &psb->cur_iocbq);
- if (iotag == 0) {
- dma_pool_free(phba->lpfc_sg_dma_buf_pool,
- psb->data, psb->dma_handle);
- kfree(psb);
- lpfc_printf_log(phba, KERN_ERR, LOG_FCP,
- "3368 Failed to allocate IOTAG for"
- " XRI:0x%x\n", lxri);
- lpfc_sli4_free_xri(phba, lxri);
- break;
- }
- psb->cur_iocbq.sli4_lxritag = lxri;
- psb->cur_iocbq.sli4_xritag = phba->sli4_hba.xri_ids[lxri];
- psb->cur_iocbq.iocb_flag |= LPFC_IO_FCP;
- psb->fcp_bpl = psb->data;
- psb->fcp_cmnd = (psb->data + sgl_size);
- psb->fcp_rsp = (struct fcp_rsp *)((uint8_t *)psb->fcp_cmnd +
- sizeof(struct fcp_cmnd));
-
- /* Initialize local short-hand pointers. */
- sgl = (struct sli4_sge *)psb->fcp_bpl;
- pdma_phys_bpl = psb->dma_handle;
- pdma_phys_fcp_cmd = (psb->dma_handle + sgl_size);
- pdma_phys_fcp_rsp = pdma_phys_fcp_cmd + sizeof(struct fcp_cmnd);
-
- /*
- * The first two bdes are the FCP_CMD and FCP_RSP.
- * The balance are sg list bdes. Initialize the
- * first two and leave the rest for queuecommand.
- */
- sgl->addr_hi = cpu_to_le32(putPaddrHigh(pdma_phys_fcp_cmd));
- sgl->addr_lo = cpu_to_le32(putPaddrLow(pdma_phys_fcp_cmd));
- sgl->word2 = le32_to_cpu(sgl->word2);
- bf_set(lpfc_sli4_sge_last, sgl, 0);
- sgl->word2 = cpu_to_le32(sgl->word2);
- sgl->sge_len = cpu_to_le32(sizeof(struct fcp_cmnd));
- sgl++;
-
- /* Setup the physical region for the FCP RSP */
- sgl->addr_hi = cpu_to_le32(putPaddrHigh(pdma_phys_fcp_rsp));
- sgl->addr_lo = cpu_to_le32(putPaddrLow(pdma_phys_fcp_rsp));
- sgl->word2 = le32_to_cpu(sgl->word2);
- bf_set(lpfc_sli4_sge_last, sgl, 1);
- sgl->word2 = cpu_to_le32(sgl->word2);
- sgl->sge_len = cpu_to_le32(sizeof(struct fcp_rsp));
-
- /*
- * Since the IOCB for the FCP I/O is built into this
- * lpfc_scsi_buf, initialize it with all known data now.
- */
- iocb = &psb->cur_iocbq.iocb;
- iocb->un.fcpi64.bdl.ulpIoTag32 = 0;
- iocb->un.fcpi64.bdl.bdeFlags = BUFF_TYPE_BDE_64;
- /* setting the BLP size to 2 * sizeof BDE may not be correct.
- * We are setting the bpl to point to out sgl. An sgl's
- * entries are 16 bytes, a bpl entries are 12 bytes.
- */
- iocb->un.fcpi64.bdl.bdeSize = sizeof(struct fcp_cmnd);
- iocb->un.fcpi64.bdl.addrLow = putPaddrLow(pdma_phys_fcp_cmd);
- iocb->un.fcpi64.bdl.addrHigh = putPaddrHigh(pdma_phys_fcp_cmd);
- iocb->ulpBdeCount = 1;
- iocb->ulpLe = 1;
- iocb->ulpClass = CLASS3;
- psb->cur_iocbq.context1 = psb;
- psb->dma_phys_bpl = pdma_phys_bpl;
-
- /* add the scsi buffer to a post list */
- list_add_tail(&psb->list, &post_sblist);
- spin_lock_irq(&phba->scsi_buf_list_get_lock);
- phba->sli4_hba.scsi_xri_cnt++;
- spin_unlock_irq(&phba->scsi_buf_list_get_lock);
- }
- lpfc_printf_log(phba, KERN_INFO, LOG_BG | LOG_FCP,
- "3021 Allocate %d out of %d requested new SCSI "
- "buffers\n", bcnt, num_to_alloc);
-
- /* post the list of scsi buffer sgls to port if available */
- if (!list_empty(&post_sblist))
- num_posted = lpfc_sli4_post_scsi_sgl_list(phba,
- &post_sblist, bcnt);
- else
- num_posted = 0;
-
- return num_posted;
-}
-
-/**
- * lpfc_new_scsi_buf - Wrapper funciton for scsi buffer allocator
- * @vport: The virtual port for which this call being executed.
- * @num_to_allocate: The requested number of buffers to allocate.
- *
- * This routine wraps the actual SCSI buffer allocator function pointer from
- * the lpfc_hba struct.
- *
- * Return codes:
- * int - number of scsi buffers that were allocated.
- * 0 = failure, less than num_to_alloc is a partial failure.
- **/
-static inline int
-lpfc_new_scsi_buf(struct lpfc_vport *vport, int num_to_alloc)
-{
- return vport->phba->lpfc_new_scsi_buf(vport, num_to_alloc);
-}
-
-/**
* lpfc_get_scsi_buf_s3 - Get a scsi buffer from lpfc_scsi_buf_list of the HBA
* @phba: The HBA for which this call is being executed.
*
return lpfc_cmd;
}
/**
- * lpfc_get_scsi_buf_s4 - Get a scsi buffer from lpfc_scsi_buf_list of the HBA
+ * lpfc_get_scsi_buf_s4 - Get a scsi buffer from lpfc_common_buf_list of the HBA
* @phba: The HBA for which this call is being executed.
*
- * This routine removes a scsi buffer from head of @phba lpfc_scsi_buf_list list
+ * This routine removes a scsi buffer from head of @phba lpfc_common_buf_list
* and returns to caller.
*
* Return codes:
{
struct lpfc_scsi_buf *lpfc_cmd, *lpfc_cmd_next;
unsigned long iflag = 0;
+ struct sli4_sge *sgl;
+ IOCB_t *iocb;
+ dma_addr_t pdma_phys_fcp_rsp;
+ dma_addr_t pdma_phys_fcp_cmd;
+ uint32_t sgl_size;
int found = 0;
- spin_lock_irqsave(&phba->scsi_buf_list_get_lock, iflag);
+ spin_lock_irqsave(&phba->common_buf_list_get_lock, iflag);
list_for_each_entry_safe(lpfc_cmd, lpfc_cmd_next,
- &phba->lpfc_scsi_buf_list_get, list) {
+ &phba->lpfc_common_buf_list_get, list) {
if (lpfc_test_rrq_active(phba, ndlp,
lpfc_cmd->cur_iocbq.sli4_lxritag))
continue;
list_del_init(&lpfc_cmd->list);
+ phba->get_common_bufs--;
found = 1;
break;
}
if (!found) {
- spin_lock(&phba->scsi_buf_list_put_lock);
- list_splice(&phba->lpfc_scsi_buf_list_put,
- &phba->lpfc_scsi_buf_list_get);
- INIT_LIST_HEAD(&phba->lpfc_scsi_buf_list_put);
- spin_unlock(&phba->scsi_buf_list_put_lock);
+ spin_lock(&phba->common_buf_list_put_lock);
+ list_splice(&phba->lpfc_common_buf_list_put,
+ &phba->lpfc_common_buf_list_get);
+ phba->get_common_bufs += phba->put_common_bufs;
+ INIT_LIST_HEAD(&phba->lpfc_common_buf_list_put);
+ phba->put_common_bufs = 0;
+ spin_unlock(&phba->common_buf_list_put_lock);
list_for_each_entry_safe(lpfc_cmd, lpfc_cmd_next,
- &phba->lpfc_scsi_buf_list_get, list) {
+ &phba->lpfc_common_buf_list_get,
+ list) {
if (lpfc_test_rrq_active(
phba, ndlp, lpfc_cmd->cur_iocbq.sli4_lxritag))
continue;
list_del_init(&lpfc_cmd->list);
+ phba->get_common_bufs--;
found = 1;
break;
}
}
- spin_unlock_irqrestore(&phba->scsi_buf_list_get_lock, iflag);
+ spin_unlock_irqrestore(&phba->common_buf_list_get_lock, iflag);
if (!found)
return NULL;
+ sgl_size = phba->cfg_sg_dma_buf_size -
+ (sizeof(struct fcp_cmnd) + sizeof(struct fcp_rsp));
+
+ /* Setup key fields in buffer that may have been changed
+ * if other protocols used this buffer.
+ */
+ lpfc_cmd->cur_iocbq.iocb_flag = LPFC_IO_FCP;
+ lpfc_cmd->prot_seg_cnt = 0;
+ lpfc_cmd->seg_cnt = 0;
+ lpfc_cmd->waitq = NULL;
+ lpfc_cmd->timeout = 0;
+ lpfc_cmd->flags = 0;
+ lpfc_cmd->start_time = jiffies;
+ lpfc_cmd->waitq = NULL;
+ lpfc_cmd->cpu = smp_processor_id();
+#ifdef CONFIG_SCSI_LPFC_DEBUG_FS
+ lpfc_cmd->prot_data_type = 0;
+#endif
+
+ lpfc_cmd->fcp_cmnd = (lpfc_cmd->data + sgl_size);
+ lpfc_cmd->fcp_rsp = (struct fcp_rsp *)((uint8_t *)lpfc_cmd->fcp_cmnd +
+ sizeof(struct fcp_cmnd));
+
+ /*
+ * The first two SGEs are the FCP_CMD and FCP_RSP.
+ * The balance are sg list bdes. Initialize the
+ * first two and leave the rest for queuecommand.
+ */
+ sgl = (struct sli4_sge *)lpfc_cmd->dma_sgl;
+ pdma_phys_fcp_cmd = (lpfc_cmd->dma_handle + sgl_size);
+ sgl->addr_hi = cpu_to_le32(putPaddrHigh(pdma_phys_fcp_cmd));
+ sgl->addr_lo = cpu_to_le32(putPaddrLow(pdma_phys_fcp_cmd));
+ sgl->word2 = le32_to_cpu(sgl->word2);
+ bf_set(lpfc_sli4_sge_last, sgl, 0);
+ sgl->word2 = cpu_to_le32(sgl->word2);
+ sgl->sge_len = cpu_to_le32(sizeof(struct fcp_cmnd));
+ sgl++;
+
+ /* Setup the physical region for the FCP RSP */
+ pdma_phys_fcp_rsp = pdma_phys_fcp_cmd + sizeof(struct fcp_cmnd);
+ sgl->addr_hi = cpu_to_le32(putPaddrHigh(pdma_phys_fcp_rsp));
+ sgl->addr_lo = cpu_to_le32(putPaddrLow(pdma_phys_fcp_rsp));
+ sgl->word2 = le32_to_cpu(sgl->word2);
+ bf_set(lpfc_sli4_sge_last, sgl, 1);
+ sgl->word2 = cpu_to_le32(sgl->word2);
+ sgl->sge_len = cpu_to_le32(sizeof(struct fcp_rsp));
+
+ /*
+ * Since the IOCB for the FCP I/O is built into this
+ * lpfc_scsi_buf, initialize it with all known data now.
+ */
+ iocb = &lpfc_cmd->cur_iocbq.iocb;
+ iocb->un.fcpi64.bdl.ulpIoTag32 = 0;
+ iocb->un.fcpi64.bdl.bdeFlags = BUFF_TYPE_BDE_64;
+ /* setting the BLP size to 2 * sizeof BDE may not be correct.
+ * We are setting the bpl to point to out sgl. An sgl's
+ * entries are 16 bytes, a bpl entries are 12 bytes.
+ */
+ iocb->un.fcpi64.bdl.bdeSize = sizeof(struct fcp_cmnd);
+ iocb->un.fcpi64.bdl.addrLow = putPaddrLow(pdma_phys_fcp_cmd);
+ iocb->un.fcpi64.bdl.addrHigh = putPaddrHigh(pdma_phys_fcp_cmd);
+ iocb->ulpBdeCount = 1;
+ iocb->ulpLe = 1;
+ iocb->ulpClass = CLASS3;
+
if (lpfc_ndlp_check_qdepth(phba, ndlp)) {
atomic_inc(&ndlp->cmd_pending);
lpfc_cmd->flags |= LPFC_SBUF_BUMP_QDEPTH;
unsigned long iflag = 0;
psb->seg_cnt = 0;
- psb->nonsg_phys = 0;
psb->prot_seg_cnt = 0;
spin_lock_irqsave(&phba->scsi_buf_list_put_lock, iflag);
* @psb: The scsi buffer which is being released.
*
* This routine releases @psb scsi buffer by adding it to tail of @phba
- * lpfc_scsi_buf_list list. For SLI4 XRI's are tied to the scsi buffer
+ * lpfc_common_buf_list list. For SLI4 XRI's are tied to the scsi buffer
* and cannot be reused for at least RA_TOV amount of time if it was
* aborted.
**/
unsigned long iflag = 0;
psb->seg_cnt = 0;
- psb->nonsg_phys = 0;
psb->prot_seg_cnt = 0;
if (psb->exch_busy) {
spin_unlock_irqrestore(&phba->sli4_hba.abts_scsi_buf_list_lock,
iflag);
} else {
+ /* MUST zero fields if buffer is reused by another protocol */
psb->pCmd = NULL;
- psb->cur_iocbq.iocb_flag = LPFC_IO_FCP;
- spin_lock_irqsave(&phba->scsi_buf_list_put_lock, iflag);
- list_add_tail(&psb->list, &phba->lpfc_scsi_buf_list_put);
- spin_unlock_irqrestore(&phba->scsi_buf_list_put_lock, iflag);
+ psb->cur_iocbq.iocb_cmpl = NULL;
+ spin_lock_irqsave(&phba->common_buf_list_put_lock, iflag);
+ list_add_tail(&psb->list, &phba->lpfc_common_buf_list_put);
+ phba->put_common_bufs++;
+ spin_unlock_irqrestore(&phba->common_buf_list_put_lock, iflag);
}
}
struct scsi_cmnd *scsi_cmnd = lpfc_cmd->pCmd;
struct scatterlist *sgel = NULL;
struct fcp_cmnd *fcp_cmnd = lpfc_cmd->fcp_cmnd;
- struct ulp_bde64 *bpl = lpfc_cmd->fcp_bpl;
+ struct ulp_bde64 *bpl = lpfc_cmd->dma_sgl;
struct lpfc_iocbq *iocbq = &lpfc_cmd->cur_iocbq;
IOCB_t *iocb_cmd = &lpfc_cmd->cur_iocbq.iocb;
struct ulp_bde64 *data_bde = iocb_cmd->unsli3.fcp_ext.dbde;
{
struct scsi_cmnd *scsi_cmnd = lpfc_cmd->pCmd;
struct fcp_cmnd *fcp_cmnd = lpfc_cmd->fcp_cmnd;
- struct ulp_bde64 *bpl = lpfc_cmd->fcp_bpl;
+ struct ulp_bde64 *bpl = lpfc_cmd->dma_sgl;
IOCB_t *iocb_cmd = &lpfc_cmd->cur_iocbq.iocb;
uint32_t num_bde = 0;
int datasegcnt, protsegcnt, datadir = scsi_cmnd->sc_data_direction;
struct scsi_cmnd *scsi_cmnd = lpfc_cmd->pCmd;
struct scatterlist *sgel = NULL;
struct fcp_cmnd *fcp_cmnd = lpfc_cmd->fcp_cmnd;
- struct sli4_sge *sgl = (struct sli4_sge *)lpfc_cmd->fcp_bpl;
+ struct sli4_sge *sgl = (struct sli4_sge *)lpfc_cmd->dma_sgl;
struct sli4_sge *first_data_sgl;
IOCB_t *iocb_cmd = &lpfc_cmd->cur_iocbq.iocb;
dma_addr_t physaddr;
{
struct scsi_cmnd *scsi_cmnd = lpfc_cmd->pCmd;
struct fcp_cmnd *fcp_cmnd = lpfc_cmd->fcp_cmnd;
- struct sli4_sge *sgl = (struct sli4_sge *)(lpfc_cmd->fcp_bpl);
+ struct sli4_sge *sgl = (struct sli4_sge *)(lpfc_cmd->dma_sgl);
IOCB_t *iocb_cmd = &lpfc_cmd->cur_iocbq.iocb;
uint32_t num_sge = 0;
int datasegcnt, protsegcnt, datadir = scsi_cmnd->sc_data_direction;
if (phba->cfg_fcp_io_sched == LPFC_FCP_SCHED_BY_CPU
&& phba->cfg_fcp_io_channel > 1) {
- cpu = smp_processor_id();
+ cpu = lpfc_cmd->cpu;
if (cpu < phba->sli4_hba.num_present_cpu) {
cpup = phba->sli4_hba.cpu_map;
cpup += cpu;
switch (dev_grp) {
case LPFC_PCI_DEV_LP:
- phba->lpfc_new_scsi_buf = lpfc_new_scsi_buf_s3;
phba->lpfc_scsi_prep_dma_buf = lpfc_scsi_prep_dma_buf_s3;
phba->lpfc_bg_scsi_prep_dma_buf = lpfc_bg_scsi_prep_dma_buf_s3;
phba->lpfc_release_scsi_buf = lpfc_release_scsi_buf_s3;
phba->lpfc_get_scsi_buf = lpfc_get_scsi_buf_s3;
break;
case LPFC_PCI_DEV_OC:
- phba->lpfc_new_scsi_buf = lpfc_new_scsi_buf_s4;
phba->lpfc_scsi_prep_dma_buf = lpfc_scsi_prep_dma_buf_s4;
phba->lpfc_bg_scsi_prep_dma_buf = lpfc_bg_scsi_prep_dma_buf_s4;
phba->lpfc_release_scsi_buf = lpfc_release_scsi_buf_s4;
lpfc_cmd->pCmd = cmnd;
lpfc_cmd->rdata = rdata;
lpfc_cmd->ndlp = ndlp;
- lpfc_cmd->timeout = 0;
- lpfc_cmd->start_time = jiffies;
cmnd->host_scribble = (unsigned char *)lpfc_cmd;
if (scsi_get_prot_op(cmnd) != SCSI_PROT_NORMAL) {
}
sdev_cnt = atomic_inc_return(&phba->sdev_cnt);
+ /* For SLI4, all IO buffers are pre-allocated */
+ if (phba->sli_rev == LPFC_SLI_REV4)
+ return 0;
+
+ /* This code path is now ONLY for SLI3 adapters */
+
/*
* Populate the cmds_per_lun count scsi_bufs into this host's globally
* available list of scsi buffers. Don't allocate more than the
(phba->cfg_hba_queue_depth - total));
num_to_alloc = phba->cfg_hba_queue_depth - total;
}
- num_allocated = lpfc_new_scsi_buf(vport, num_to_alloc);
+ num_allocated = lpfc_new_scsi_buf_s3(vport, num_to_alloc);
if (num_to_alloc != num_allocated) {
lpfc_printf_vlog(vport, KERN_ERR, LOG_FCP,
"0708 Allocation request of %d "
};
struct lpfc_scsi_buf {
+ /* Common fields */
struct list_head list;
+ void *data;
+ dma_addr_t dma_handle;
+ dma_addr_t dma_phys_sgl;
+ struct ulp_bde64 *dma_sgl;
+ struct lpfc_iocbq cur_iocbq;
+
+ /* SCSI specific fields */
struct scsi_cmnd *pCmd;
struct lpfc_rport_data *rdata;
struct lpfc_nodelist *ndlp;
uint32_t timeout;
uint16_t flags; /* TBD convert exch_busy to flags */
-#define LPFC_SBUF_XBUSY 0x1 /* SLI4 hba reported XB on WCQE cmpl */
-#define LPFC_SBUF_BUMP_QDEPTH 0x8 /* bumped queue depth counter */
+#define LPFC_SBUF_XBUSY 0x1 /* SLI4 hba reported XB on WCQE cmpl */
+#define LPFC_SBUF_BUMP_QDEPTH 0x2 /* bumped queue depth counter */
uint16_t exch_busy; /* SLI4 hba reported XB on complete WCQE */
+ uint16_t cpu;
uint16_t status; /* From IOCB Word 7- ulpStatus */
uint32_t result; /* From IOCB Word 4. */
* to dma_unmap_sg. */
uint32_t prot_seg_cnt; /* seg_cnt's counterpart for protection data */
- dma_addr_t nonsg_phys; /* Non scatter-gather physical address. */
-
/*
* data and dma_handle are the kernel virtual and bus address of the
* dma-able buffer containing the fcp_cmd, fcp_rsp and a scatter
* gather bde list that supports the sg_tablesize value.
*/
- void *data;
- dma_addr_t dma_handle;
-
struct fcp_cmnd *fcp_cmnd;
struct fcp_rsp *fcp_rsp;
- struct ulp_bde64 *fcp_bpl;
-
- dma_addr_t dma_phys_bpl;
-
- /* cur_iocbq has phys of the dma-able buffer.
- * Iotag is in here
- */
- struct lpfc_iocbq cur_iocbq;
- uint16_t cpu;
wait_queue_head_t *waitq;
unsigned long start_time;
list_add_tail(&rsrc_blks->list, ext_blk_list);
rsrc_start = rsrc_id;
if ((type == LPFC_RSC_TYPE_FCOE_XRI) && (j == 0)) {
- phba->sli4_hba.scsi_xri_start = rsrc_start +
+ phba->sli4_hba.common_xri_start = rsrc_start +
lpfc_sli4_get_iocb_cnt(phba);
- phba->sli4_hba.nvme_xri_start =
- phba->sli4_hba.scsi_xri_start +
- phba->sli4_hba.scsi_xri_max;
}
while (rsrc_id < (rsrc_start + rsrc_size)) {
return total_cnt;
}
+/**
+ * lpfc_sli4_repost_common_sgl_list - Repost all the allocated nvme buffer sgls
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine walks the list of nvme buffers that have been allocated and
+ * repost them to the port by using SGL block post. This is needed after a
+ * pci_function_reset/warm_start or start. The lpfc_hba_down_post_s4 routine
+ * is responsible for moving all nvme buffers on the lpfc_abts_nvme_sgl_list
+ * to the lpfc_common_buf_list. If the repost fails, reject all nvme buffers.
+ *
+ * Returns: 0 = success, non-zero failure.
+ **/
+int
+lpfc_sli4_repost_common_sgl_list(struct lpfc_hba *phba)
+{
+ LIST_HEAD(post_nblist);
+ int num_posted, rc = 0;
+
+ /* get all NVME buffers need to repost to a local list */
+ spin_lock_irq(&phba->common_buf_list_get_lock);
+ spin_lock(&phba->common_buf_list_put_lock);
+ list_splice_init(&phba->lpfc_common_buf_list_get, &post_nblist);
+ list_splice(&phba->lpfc_common_buf_list_put, &post_nblist);
+ phba->get_common_bufs = 0;
+ phba->put_common_bufs = 0;
+ spin_unlock(&phba->common_buf_list_put_lock);
+ spin_unlock_irq(&phba->common_buf_list_get_lock);
+
+ /* post the list of nvme buffer sgls to port if available */
+ if (!list_empty(&post_nblist)) {
+ num_posted = lpfc_sli4_post_common_sgl_list(
+ phba, &post_nblist, phba->sli4_hba.common_xri_cnt);
+ /* failed to post any nvme buffer, return error */
+ if (num_posted == 0)
+ rc = -EIO;
+ }
+ return rc;
+}
+
void
lpfc_set_host_data(struct lpfc_hba *phba, LPFC_MBOXQ_t *mbox)
{
/* We need 1 iocbq for every SGL, for IO processing */
cnt += phba->sli4_hba.nvmet_xri_cnt;
} else {
- /* update host scsi xri-sgl sizes and mappings */
- rc = lpfc_sli4_scsi_sgl_update(phba);
+ /* update host common xri-sgl sizes and mappings */
+ rc = lpfc_sli4_common_sgl_update(phba);
if (unlikely(rc)) {
lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_SLI,
- "6309 Failed to update scsi-sgl size "
+ "6082 Failed to update nvme-sgl size "
"and mapping: %d\n", rc);
goto out_destroy_queue;
}
- /* update host nvme xri-sgl sizes and mappings */
- rc = lpfc_sli4_nvme_sgl_update(phba);
+ /* register the allocated common sgl pool to the port */
+ rc = lpfc_sli4_repost_common_sgl_list(phba);
if (unlikely(rc)) {
lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_SLI,
- "6082 Failed to update nvme-sgl size "
- "and mapping: %d\n", rc);
+ "6116 Error %d during nvme sgl post "
+ "operation\n", rc);
+ /* Some NVME buffers were moved to abort nvme list */
+ /* A pci function reset will repost them */
+ rc = -ENODEV;
goto out_destroy_queue;
}
-
cnt = phba->cfg_iocb_cnt * 1024;
}
}
}
- if (phba->cfg_enable_fc4_type & LPFC_ENABLE_FCP) {
- /* register the allocated scsi sgl pool to the port */
- rc = lpfc_sli4_repost_scsi_sgl_list(phba);
- if (unlikely(rc)) {
- lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_SLI,
- "0383 Error %d during scsi sgl post "
- "operation\n", rc);
- /* Some Scsi buffers were moved to abort scsi list */
- /* A pci function reset will repost them */
- rc = -ENODEV;
- goto out_destroy_queue;
- }
- }
-
- if ((phba->cfg_enable_fc4_type & LPFC_ENABLE_NVME) &&
- (phba->nvmet_support == 0)) {
-
- /* register the allocated nvme sgl pool to the port */
- rc = lpfc_repost_nvme_sgl_list(phba);
- if (unlikely(rc)) {
- lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_SLI,
- "6116 Error %d during nvme sgl post "
- "operation\n", rc);
- /* Some NVME buffers were moved to abort nvme list */
- /* A pci function reset will repost them */
- rc = -ENODEV;
- goto out_destroy_queue;
- }
- }
-
/* Post the rpi header region to the device. */
rc = lpfc_sli4_post_all_rpi_hdrs(phba);
if (unlikely(rc)) {
/* 128 byte wqe support here */
lpfc_cmd = iocbq->context1;
- sgl = (struct sli4_sge *)lpfc_cmd->fcp_bpl;
+ sgl = (struct sli4_sge *)lpfc_cmd->dma_sgl;
fcp_cmnd = lpfc_cmd->fcp_cmnd;
/* Word 0-2 - FCP_CMND */
/* 128 byte wqe support here */
lpfc_cmd = iocbq->context1;
- sgl = (struct sli4_sge *)lpfc_cmd->fcp_bpl;
+ sgl = (struct sli4_sge *)lpfc_cmd->dma_sgl;
fcp_cmnd = lpfc_cmd->fcp_cmnd;
/* Word 0-2 - FCP_CMND */
/* 128 byte wqe support here */
lpfc_cmd = iocbq->context1;
- sgl = (struct sli4_sge *)lpfc_cmd->fcp_bpl;
+ sgl = (struct sli4_sge *)lpfc_cmd->dma_sgl;
fcp_cmnd = lpfc_cmd->fcp_cmnd;
/* Word 0-2 - FCP_CMND */
}
/**
- * lpfc_sli4_post_scsi_sgl_block - post a block of scsi sgl list to firmware
+ * lpfc_sli4_post_common_sgl_block - post a block of nvme sgl list to firmware
* @phba: pointer to lpfc hba data structure.
- * @sblist: pointer to scsi buffer list.
+ * @nblist: pointer to nvme buffer list.
* @count: number of scsi buffers on the list.
*
* This routine is invoked to post a block of @count scsi sgl pages from a
- * SCSI buffer list @sblist to the HBA using non-embedded mailbox command.
+ * SCSI buffer list @nblist to the HBA using non-embedded mailbox command.
* No Lock is held.
*
**/
-int
-lpfc_sli4_post_scsi_sgl_block(struct lpfc_hba *phba,
- struct list_head *sblist,
- int count)
+static int
+lpfc_sli4_post_common_sgl_block(struct lpfc_hba *phba,
+ struct list_head *nblist,
+ int count)
{
- struct lpfc_scsi_buf *psb;
+ struct lpfc_nvme_buf *lpfc_ncmd;
struct lpfc_mbx_post_uembed_sgl_page1 *sgl;
struct sgl_page_pairs *sgl_pg_pairs;
void *viraddr;
sizeof(union lpfc_sli4_cfg_shdr) + sizeof(uint32_t);
if (reqlen > SLI4_PAGE_SIZE) {
lpfc_printf_log(phba, KERN_WARNING, LOG_INIT,
- "0217 Block sgl registration required DMA "
+ "6118 Block sgl registration required DMA "
"size (%d) great than a page\n", reqlen);
return -ENOMEM;
}
mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
if (!mbox) {
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
- "0283 Failed to allocate mbox cmd memory\n");
+ "6119 Failed to allocate mbox cmd memory\n");
return -ENOMEM;
}
/* Allocate DMA memory and set up the non-embedded mailbox command */
alloclen = lpfc_sli4_config(phba, mbox, LPFC_MBOX_SUBSYSTEM_FCOE,
- LPFC_MBOX_OPCODE_FCOE_POST_SGL_PAGES, reqlen,
- LPFC_SLI4_MBX_NEMBED);
+ LPFC_MBOX_OPCODE_FCOE_POST_SGL_PAGES,
+ reqlen, LPFC_SLI4_MBX_NEMBED);
if (alloclen < reqlen) {
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
- "2561 Allocated DMA memory size (%d) is "
+ "6120 Allocated DMA memory size (%d) is "
"less than the requested DMA memory "
"size (%d)\n", alloclen, reqlen);
lpfc_sli4_mbox_cmd_free(phba, mbox);
sgl_pg_pairs = &sgl->sgl_pg_pairs;
pg_pairs = 0;
- list_for_each_entry(psb, sblist, list) {
+ list_for_each_entry(lpfc_ncmd, nblist, list) {
/* Set up the sge entry */
sgl_pg_pairs->sgl_pg0_addr_lo =
- cpu_to_le32(putPaddrLow(psb->dma_phys_bpl));
+ cpu_to_le32(putPaddrLow(lpfc_ncmd->dma_phys_sgl));
sgl_pg_pairs->sgl_pg0_addr_hi =
- cpu_to_le32(putPaddrHigh(psb->dma_phys_bpl));
+ cpu_to_le32(putPaddrHigh(lpfc_ncmd->dma_phys_sgl));
if (phba->cfg_sg_dma_buf_size > SGL_PAGE_SIZE)
- pdma_phys_bpl1 = psb->dma_phys_bpl + SGL_PAGE_SIZE;
+ pdma_phys_bpl1 = lpfc_ncmd->dma_phys_sgl +
+ SGL_PAGE_SIZE;
else
pdma_phys_bpl1 = 0;
sgl_pg_pairs->sgl_pg1_addr_lo =
cpu_to_le32(putPaddrHigh(pdma_phys_bpl1));
/* Keep the first xritag on the list */
if (pg_pairs == 0)
- xritag_start = psb->cur_iocbq.sli4_xritag;
+ xritag_start = lpfc_ncmd->cur_iocbq.sli4_xritag;
sgl_pg_pairs++;
pg_pairs++;
}
/* Perform endian conversion if necessary */
sgl->word0 = cpu_to_le32(sgl->word0);
- if (!phba->sli4_hba.intr_enable)
+ if (!phba->sli4_hba.intr_enable) {
rc = lpfc_sli_issue_mbox(phba, mbox, MBX_POLL);
- else {
+ } else {
mbox_tmo = lpfc_mbox_tmo_val(phba, mbox);
rc = lpfc_sli_issue_mbox_wait(phba, mbox, mbox_tmo);
}
- shdr = (union lpfc_sli4_cfg_shdr *) &sgl->cfg_shdr;
+ shdr = (union lpfc_sli4_cfg_shdr *)&sgl->cfg_shdr;
shdr_status = bf_get(lpfc_mbox_hdr_status, &shdr->response);
shdr_add_status = bf_get(lpfc_mbox_hdr_add_status, &shdr->response);
if (rc != MBX_TIMEOUT)
lpfc_sli4_mbox_cmd_free(phba, mbox);
if (shdr_status || shdr_add_status || rc) {
lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
- "2564 POST_SGL_BLOCK mailbox command failed "
+ "6125 POST_SGL_BLOCK mailbox command failed "
"status x%x add_status x%x mbx status x%x\n",
shdr_status, shdr_add_status, rc);
rc = -ENXIO;
}
/**
+ * lpfc_sli4_post_common_sgl_list - Post blocks of nvme buffer sgls from a list
+ * @phba: pointer to lpfc hba data structure.
+ * @post_nblist: pointer to the nvme buffer list.
+ *
+ * This routine walks a list of nvme buffers that was passed in. It attempts
+ * to construct blocks of nvme buffer sgls which contains contiguous xris and
+ * uses the non-embedded SGL block post mailbox commands to post to the port.
+ * For single NVME buffer sgl with non-contiguous xri, if any, it shall use
+ * embedded SGL post mailbox command for posting. The @post_nblist passed in
+ * must be local list, thus no lock is needed when manipulate the list.
+ *
+ * Returns: 0 = failure, non-zero number of successfully posted buffers.
+ **/
+int
+lpfc_sli4_post_common_sgl_list(struct lpfc_hba *phba,
+ struct list_head *post_nblist, int sb_count)
+{
+ struct lpfc_nvme_buf *lpfc_ncmd, *lpfc_ncmd_next;
+ int status, sgl_size;
+ int post_cnt = 0, block_cnt = 0, num_posting = 0, num_posted = 0;
+ dma_addr_t pdma_phys_sgl1;
+ int last_xritag = NO_XRI;
+ int cur_xritag;
+ unsigned long iflag;
+ LIST_HEAD(prep_nblist);
+ LIST_HEAD(blck_nblist);
+ LIST_HEAD(nvme_nblist);
+
+ /* sanity check */
+ if (sb_count <= 0)
+ return -EINVAL;
+
+ sgl_size = phba->cfg_sg_dma_buf_size;
+ list_for_each_entry_safe(lpfc_ncmd, lpfc_ncmd_next, post_nblist, list) {
+ list_del_init(&lpfc_ncmd->list);
+ block_cnt++;
+ if ((last_xritag != NO_XRI) &&
+ (lpfc_ncmd->cur_iocbq.sli4_xritag != last_xritag + 1)) {
+ /* a hole in xri block, form a sgl posting block */
+ list_splice_init(&prep_nblist, &blck_nblist);
+ post_cnt = block_cnt - 1;
+ /* prepare list for next posting block */
+ list_add_tail(&lpfc_ncmd->list, &prep_nblist);
+ block_cnt = 1;
+ } else {
+ /* prepare list for next posting block */
+ list_add_tail(&lpfc_ncmd->list, &prep_nblist);
+ /* enough sgls for non-embed sgl mbox command */
+ if (block_cnt == LPFC_NEMBED_MBOX_SGL_CNT) {
+ list_splice_init(&prep_nblist, &blck_nblist);
+ post_cnt = block_cnt;
+ block_cnt = 0;
+ }
+ }
+ num_posting++;
+ last_xritag = lpfc_ncmd->cur_iocbq.sli4_xritag;
+
+ /* end of repost sgl list condition for NVME buffers */
+ if (num_posting == sb_count) {
+ if (post_cnt == 0) {
+ /* last sgl posting block */
+ list_splice_init(&prep_nblist, &blck_nblist);
+ post_cnt = block_cnt;
+ } else if (block_cnt == 1) {
+ /* last single sgl with non-contiguous xri */
+ if (sgl_size > SGL_PAGE_SIZE)
+ pdma_phys_sgl1 =
+ lpfc_ncmd->dma_phys_sgl +
+ SGL_PAGE_SIZE;
+ else
+ pdma_phys_sgl1 = 0;
+ cur_xritag = lpfc_ncmd->cur_iocbq.sli4_xritag;
+ status = lpfc_sli4_post_sgl(
+ phba, lpfc_ncmd->dma_phys_sgl,
+ pdma_phys_sgl1, cur_xritag);
+ if (status) {
+ /* failure, put on abort nvme list */
+ lpfc_ncmd->flags |= LPFC_SBUF_XBUSY;
+ } else {
+ /* success, put on NVME buffer list */
+ lpfc_ncmd->flags &= ~LPFC_SBUF_XBUSY;
+ lpfc_ncmd->status = IOSTAT_SUCCESS;
+ num_posted++;
+ }
+ /* success, put on NVME buffer sgl list */
+ list_add_tail(&lpfc_ncmd->list, &nvme_nblist);
+ }
+ }
+
+ /* continue until a nembed page worth of sgls */
+ if (post_cnt == 0)
+ continue;
+
+ /* post block of NVME buffer list sgls */
+ status = lpfc_sli4_post_common_sgl_block(phba, &blck_nblist,
+ post_cnt);
+
+ /* don't reset xirtag due to hole in xri block */
+ if (block_cnt == 0)
+ last_xritag = NO_XRI;
+
+ /* reset NVME buffer post count for next round of posting */
+ post_cnt = 0;
+
+ /* put posted NVME buffer-sgl posted on NVME buffer sgl list */
+ while (!list_empty(&blck_nblist)) {
+ list_remove_head(&blck_nblist, lpfc_ncmd,
+ struct lpfc_nvme_buf, list);
+ if (status) {
+ /* failure, put on abort nvme list */
+ lpfc_ncmd->flags |= LPFC_SBUF_XBUSY;
+ } else {
+ /* success, put on NVME buffer list */
+ lpfc_ncmd->flags &= ~LPFC_SBUF_XBUSY;
+ lpfc_ncmd->status = IOSTAT_SUCCESS;
+ num_posted++;
+ }
+ list_add_tail(&lpfc_ncmd->list, &nvme_nblist);
+ }
+ }
+ /* Push NVME buffers with sgl posted to the available list */
+ while (!list_empty(&nvme_nblist)) {
+ list_remove_head(&nvme_nblist, lpfc_ncmd,
+ struct lpfc_nvme_buf, list);
+ lpfc_ncmd->cur_iocbq.wqe_cmpl = NULL;
+ lpfc_ncmd->cur_iocbq.iocb_cmpl = NULL;
+ spin_lock_irqsave(&phba->common_buf_list_put_lock, iflag);
+ list_add_tail(&lpfc_ncmd->list,
+ &phba->lpfc_common_buf_list_put);
+ phba->put_common_bufs++;
+ spin_unlock_irqrestore(&phba->common_buf_list_put_lock, iflag);
+ }
+ return num_posted;
+}
+
+/**
* lpfc_fc_frame_check - Check that this frame is a valid frame to handle
* @phba: pointer to lpfc_hba struct that the frame was received on
* @fc_hdr: A pointer to the FC Header data (In Big Endian Format)
#define LPFC_FCP_IO_CHAN_DEF 4
#define LPFC_NVME_IO_CHAN_DEF 0
+/* Common buffer size to accomidate SCSI and NVME IO buffers */
+#define LPFC_COMMON_IO_BUF_SZ 768
+
/* Number of channels used for Flash Optimized Fabric (FOF) operations */
#define LPFC_FOF_IO_CHAN_NUM 1
uint16_t rpi_hdrs_in_use; /* must post rpi hdrs if set. */
uint16_t next_xri; /* last_xri - max_cfg_param.xri_base = used */
uint16_t next_rpi;
- uint16_t nvme_xri_max;
- uint16_t nvme_xri_cnt;
- uint16_t nvme_xri_start;
- uint16_t scsi_xri_max;
- uint16_t scsi_xri_cnt;
- uint16_t scsi_xri_start;
+ uint16_t common_xri_max;
+ uint16_t common_xri_cnt;
+ uint16_t common_xri_start;
uint16_t els_xri_cnt;
uint16_t nvmet_xri_cnt;
uint16_t nvmet_io_wait_cnt;
int lpfc_sli4_queue_setup(struct lpfc_hba *);
void lpfc_sli4_queue_unset(struct lpfc_hba *);
int lpfc_sli4_post_sgl(struct lpfc_hba *, dma_addr_t, dma_addr_t, uint16_t);
-int lpfc_sli4_repost_scsi_sgl_list(struct lpfc_hba *);
-int lpfc_repost_nvme_sgl_list(struct lpfc_hba *phba);
+int lpfc_repost_common_sgl_list(struct lpfc_hba *phba);
uint16_t lpfc_sli4_next_xritag(struct lpfc_hba *);
void lpfc_sli4_free_xri(struct lpfc_hba *, int);
int lpfc_sli4_post_async_mbox(struct lpfc_hba *);
-int lpfc_sli4_post_scsi_sgl_block(struct lpfc_hba *, struct list_head *, int);
struct lpfc_cq_event *__lpfc_sli4_cq_event_alloc(struct lpfc_hba *);
struct lpfc_cq_event *lpfc_sli4_cq_event_alloc(struct lpfc_hba *);
void __lpfc_sli4_cq_event_release(struct lpfc_hba *, struct lpfc_cq_event *);
projects / platform / kernel / linux-rpi.git / commitdiff