+ 2011-01-29 Stefano Lattarini <stefano.lattarini@gmail.com>
+
+ tests: fix spurious failures in lflags*.test
+ * tests/lflags.test: Remove 'LEX' from the environment, so
+ that it won't be erroneously picked up by `make -e'.
+ * tests/lflags2.test: Likewise.
+
+2011-01-29 Stefano Lattarini <stefano.lattarini@gmail.com>
+
+ coverage: more on 'yacc -d' and recovery from deleted headers
+ * tests/yacc-deleted-headers.test: New test.
+ * tests/Makefile.am (TESTS): Update.
+
+2011-01-29 Stefano Lattarini <stefano.lattarini@gmail.com>
+
+ tests: remove redundancy from silent lex/yacc tests
+ * tests/silent-yacc-gcc.test, tests/silent-yacc-generic.test: Merge
+ these two testcases into ...
+ * tests/silent-yacc.test: ... this new one, which doesn't fiddle
+ which dependency tracking, as that shouldn't impact on generation
+ of yacc-derived C source and header files (and, for what concerns
+ compilation of C files, is already tested in other testcases).
+ * tests/silent-lex-gcc.test, tests/silent-lex-generic.test: Merge
+ these two testcases into ...
+ * tests/silent-lex.test: ... this new test, for similar reasons.
+ * tests/Makefile.am (TESTS): Update.
+
+2011-01-29 Stefano Lattarini <stefano.lattarini@gmail.com>
+ Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
+
+ tests init: better messages for 'yacc' and 'lex' requirements
+ * tests/defs.in: Give better diagnostic messages when a test must
+ be skipped to the unavailability of yacc or lex program. Also,
+ improve syncing between code for requiring yacc and lex.
+
+2011-01-28 Stefano Lattarini <stefano.lattarini@gmail.com>
+
+ configure: look for a lex program to be used by the testsuite
+ This will allow the testcases requiring a 'lex' program to run also
+ with vendor/legacy lex implementations, not only with 'flex'.
+ * configure.ac: Look for a lex program, using AC_CHECK_PROGS.
+ * tests/defs.in: New required entry 'lex'.
+ ($LEX): Let the user override the lex program to be used by the
+ testsuite.
+ * tests/cond35.test ($required): Require 'lex', not 'flex'.
+ * tests/cond36.test: Likewise.
+ * tests/lexv3.test: Likewise.
+ * tests/lexv3.test: Likewise.
+ * tests/silent-lex-gcc.test: Likewise.
+ * tests/silent-lex-generic.test: Likewise.
+ * tests/silent-many-gcc.test: Likewise.
+ * tests/silent-many-generic.test:likewise.
+ * tests/lexvpath.test: Likewise, and fix typo in comments.
+
+2011-01-22 Stefano Lattarini <stefano.lattarini@gmail.com>
+
+ configure: look for a yacc program to be used by the testsuite
+ Instead of forcing the user to manually export 'YACC' in the
+ testsuite to use a non-bison yacc, we now look for a yacc program
+ at configure time, and use that as the default in the testsuite.
+ * configure.ac: Look for a yacc program, using AC_CHECK_PROGS.
+ * tests/defs.in: Updated to use the value of $YACC precomputed by
+ configure, unless the user overrides that in the environment.
+
+2011-01-22 Stefano Lattarini <stefano.lattarini@gmail.com>
+
+ tests: more coverage on yacc/lex silent-rules, plus minor cleanups
+ * tests/silent-yacc-gcc.test: Add sanity checks verifying that the
+ generated Makefile.in files really contains the non-generic rules
+ we expect. Do not redundantly manually remove files we know to be
+ already removed "make maintainer-clean".
+ (Makefile.am): Ensure we cover also non-generic yacc rules, by
+ setting target-specific YFLAGS.
+ (sub/Makefile.am): Likewise.
+ * tests/silent-yacc-generic.test: Likewise.
+ * tests/silent-lex-gcc.test: Likewise, but with LFLAGS instead of
+ YFLAGS.
+ * tests/silent-lex-generic.test: Likewise.
+ * tests/silent-many-gcc.test: Likewise, but with both LFLAGS and
+ YFLAGS. Also ...
+ (do_and_check_verbose_build): Remove redundant blank line.
+ * tests/silent-many-generic.test: Likewise.
+ * tests/silent-yacc-headers.test: New test.
+ * tests/Makefile.am (TESTS): Update.
+
+2011-01-22 Stefano Lattarini <stefano.lattarini@gmail.com>
+
+ tests: fix spurious failures in yflags*.test
+ * tests/yflags.test: Remove 'YACC' from the environment, so
+ that it won't be erroneously picked up by `make -e'.
+ * tests/yflags2.test: Likewise.
+
+2011-01-22 Stefano Lattarini <stefano.lattarini@gmail.com>
+
+ tests: cover yacc target-specific flags, and `-v' flag handling
+ * tests/yacc-basic.test: Also try to build a parser having `-v'
+ as target-specific flags. Add a couple of `ls -l' commands, for
+ debugging. Update and extend comments. Escape literal dots in
+ grep regular expressions.
+
+2011-01-12 Stefano Lattarini <stefano.lattarini@gmail.com>
+
+ docs: clustered '-d' not recognized in YFLAGS
+ This change fixes automake bug#7828.
+ * doc/automake.texi (Yacc and Lex): Document that automake
+ recognizes '-d' in AM_YFLAGS only if it's not clustered with
+ other options.
+ From a report by Юрий Пухальский.
+
+2011-01-11 Stefano Lattarini <stefano.lattarini@gmail.com>
+
+ tests: do not force yacc-requiring tests to use bison
+ * tests/defs.in: New required entry 'yacc'. Remove old
+ required entry 'bison'.
+ * tests/cond35.test ($required): Require yacc, not bison.
+ * tests/cond36.test: Likewise.
+ * tests/pr204.test: Likewise.
+ * tests/silent-many-gcc.test: Likewise.
+ * tests/silent-many-generic.test: Likewise.
+ * tests/silent-yacc-gcc.test: Likewise.
+ * tests/silent-yacc-generic.test: Likewise.
+ * tests/subpkg.test: Likewise.
+ * tests/suffix10.test: Likewise.
+ * tests/yacc-basic.test: Likewise.
+ * tests/yacc-clean.test: Likewise.
+ * tests/yacc-d-basic.test: Likewise.
+ * tests/yacc-d-vpath.test: Likewise.
+ * tests/yacc-dist-nobuild.test: Likewise.
+ * tests/yacc-nodist.test: Likewise.
+ * tests/yacc4.test: Likewise.
+ * tests/yacc6.test: Likewise.
+ * tests/yacc7.test: Likewise.
+ * tests/yacc8.test: Likewise.
+ * tests/yaccdry.test: Likewise.
+ * tests/yaccvpath.test: Likewise.
+
+2011-01-10 Stefano Lattarini <stefano.lattarini@gmail.com>
+
+ yacc: warn about conditional content in *YFLAGS variables
+ This change fixes automake bug#7804.
+ * automake.in (lang_yacc_target_hook): Warn if any of the relevant
+ *YFLAGS variables has conditional contents (not only a conditional
+ definition). Related refactoring.
+ * NEWS: Updated.
+ * tests/yflags-conditional.test: Updated and extended.
+ * tests/yflags-conditional-force.test: New test.
+ * tests/Makefile.am (TESTS): Updated.
+
+2011-01-08 Stefano Lattarini <stefano.lattarini@gmail.com>
+
+ yacc: support variable expansions in *YFLAGS definition.
+ This change fixes automake bug#7800.
+ * automake.in (lang_yacc_target_hook): Use 'value_as_list_recursive'
+ instead of 'variable_value' to get the value of *YFLAGS variables.
+ Related changes.
+ ($DASH_D_PATTERN): Removed.
+ * tests/Makefile.am (XFAIL_TESTS): Remove yflags-var-expand.test.
+ * tests/yacc-clean.test: Remove workaround for now-fixed bug.
+ * NEWS: Update.
+
+2011-01-08 Stefano Lattarini <stefano.lattarini@gmail.com>
+
+ yacc: more tests on *YFLAGS support
+ * tests/yflags-var-expand.test: New test, still xfailing. It
+ exposes automake bug#7800 -- "automake fails to honor `-d' in
+ AM_YFLAGS when variable expansions are involved".
+ * tests/yflags-d-false-positive.test: New test, checking that
+ automake do not spuriously see `-d' in *YFLAGS when that isn't
+ really there.
+ * tests/yflags-force-override.test: New test, checking that
+ automake can cope with definition of the YFLAGS variable in
+ Makefile.am (even if that is an extremely bad practice, as that
+ variable is user-reserved).
+ * tests/yflags-cmdline-override.test: New test, checking that
+ automake can cope with user-redefinition of YFLAGS at configure
+ time and/or at make time.
+ * tests/yflags-conditional.test: New test, checks that automake
+ warns on conditionally-defined *YFLAGS variables.
+ * tests/Makefile.am (TESTS, XFAIL_TESTS): Update.
+
+2011-01-08 Stefano Lattarini <stefano.lattarini@gmail.com>
+
+ yacc: extend and improve tests
+ * tests/yacc-basic.test: Also check that the intermediate C file
+ is mentioned in the generated Makefile.in, and that it is created
+ by the first make invocation.
+ * tests/yacc3.test: Test removed, superseded by ...
+ * tests/yacc-d-basic.test: ... this new test.
+ * tests/yacc2.test: Add reference to that new test in the heading
+ comments.
+ * tests/yacc-d-vpath.test: New test.
+ * tests/yaccvpath.test: Updated heading comments. Do not require
+ gcc anymore, as any working C compiler should be enough. Remove
+ redundant comments.
+ * tests/yacc-nodist.test: New test.
+ * tests/yacc-dist-nobuild.test: New test.
+ * tests/Makefile.am (TESTS): Update.
+
+2010-12-13 Stefano Lattarini <stefano.lattarini@gmail.com>
+
+ Extend, fix and improve tests on Lex and Yacc support.
+ * tests/lexcpp.test: New test script, on support for Lex + C++.
+ * tests/lexvpath.test: New test script, test build and rebuild
+ rules for lexers in VPATH setup.
+ * tests/yacc-basic.test: New test script, run simple "semantic"
+ checks on basic Yacc support (similarly to what lex3.test does
+ for Lex support).
+ * tests/lex.test: Don't create useless dummy source file joe.l.
+ Remove extra blank lines.
+ * tests/lex4.test: Add trailing `:' command. Do not create dummy
+ useless lex source file.
+ * tests/lex2.test: Likewise. Call automake with the `-a' option,
+ so that it doesn't fail for the absence of `ylwrap' script. Make
+ grepping of automake stderr stricter.
+ * tests/yacc7.test: Add trailing `:' command. Enable `errexit'
+ shell flag earlier (just after having sourced ./defs).
+ * tests/yacc4.test: Likewise. Also ...
+ (configure.in): Use pre-populated skeleton set up by ./defs,
+ instead of writing one from scratch.
+ Other minor cosmetic changes.
+ * tests/yacc5.test: Likewise.
+ * tests/yaccvpath.test: Likewise. Also ...
+ ($distdir): New variable.
+ Use it throughout.
+ * tests/lex5.test: Likewise.
+ * tests/lex3.test: Likewise. Check the distdir, rather than
+ grepping the distribution tarball. Extend the test on the
+ created binary, and be sure to avoid hangs. Add some comments.
+ * tests/yacc.test: Use stricter grepping. Add trailing `:'.
+ * tests/yacc6.test: Likewise.
+ * tests/yacc3.test: Likewise. Do not create the unused file
+ `Makefile.sed'. Remove useless rules from Makefile.am. Other
+ minor cosmetic changes.
+ * tests/yacc2.test: Make grepping of generated `Makefile.in' and
+ of automake error messages stricter. Do not redirect output of
+ grep to /dev/null. Move call to aclocal earlier. Reduce the
+ number of empty blank lines. Fix a typo in comments.
+ * tests/yacc8.test: Fixed bugs that reduced the completeness of
+ the tests. Added trailing `:' command.
+ (configure.in): Use pre-populated skeleton set up by ./defs,
+ instead of writing one from scratch.
+ * tests/yaccpp.test: Test also extensions `.y++', `.ypp', and
+ `.yxx', rather than only `.yy'.
+ * tests/Makefile.am (TESTS): Update.
+
+2011-01-07 Stefano Lattarini <stefano.lattarini@gmail.com>
+
+ yacc: "make clean" removes .c and .h files from non-distributed .y
+ Previously, while automake did *not* distribute C source and header
+ files derived from non-distributed Yacc sources, it still caused
+ them to be removed only by "make maintainer-clean" only, and not by
+ simply "make clean" or "make distclean".
+ This caused "make distcheck" to fail, unless the developer put
+ those generated .c and .h files in CLEANFILES or in DISTCLEANFILES
+ by hand.
+ This change fixes this issue, by making non-distributed `.c' and
+ `.h' files generated by non-distributed Yacc sources cleaned by
+ "make clean".
+ * tests/automake.in (lang_yacc_target_hook): Make C source and
+ header files derived from non-distributed Yacc files cleaned by
+ "make clean", not only by "make maintainer-clean".
+ * tests/yacc-clean.test: New test.
+ * tests/Makefile.am (TESTS): Update.
+ * NEWS: Update.
+
+2011-01-02 Stefano Lattarini <stefano.lattarini@gmail.com>
+
+ * NEWS: Fix typo (forgotten word).
+
+2011-01-02 Stefano Lattarini <stefano.lattarini@gmail.com>
+ Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
+
+ docs: how to work around checks on invalid primary/directory couples
+ * doc/automake.texi (Uniform): Document the blessed idiom which can
+ be used to work around automake checks on invalid primary/directory
+ couples (such as `lib_PROGRAMS' or `doc_LIBRARIES').
+
+2011-01-02 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
+
+ Sync auxiliary files from upstream.
+ * lib/config.guess, lib/config.sub, lib/texinfo.tex:
+ Sync from upstream.
+
+ Fix maintainer-check regression.
+ * tests/subobj11a.test: Pass DISTCHECK_CONFIGURE_FLAGS in the
+ environment.
+
+ Bump copyright years.
+ * aclocal.in (write_aclocal, version): Bump copyright years.
+ * automake.in (gen_copyright, version): Likewise.
+ * doc/automake.texi: Likewise.
+
+2010-12-23 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
+ Stefano Lattarini <stefano.lattarini@gmail.com>
+
+ Work around a bug in file-inclusion mechanism of Solaris make.
+ * automake.in (handle_single_transform): In the name of the
+ dependency file: collapse multiple slash characters into a single
+ one.
+ * tests/subobj11a.test: New test.
+ * tests/subobj11b.test: Likewise.
+ * tests/subobj11c.test: Likewise.
+ * tests/depcomp8a.test: Likewise.
+ * tests/depcomp8b.test: Likewise.
+ * tests/Makefile.am (TESTS): Updated.
+ * NEWS: Updated.
+ Report by Stefano Lattarini, quick fix by Ralf Wildenhues, final
+ patch and tests by Stefano Lattarini.
+
+2010-12-22 Stefano Lattarini <stefano.lattarini@gmail.com>
+
+ Fix two spurious testsuite failures on IRIX 6.5.
+ * tests/suffix13.test (Makefile.am): Account for VPATH issues on
+ weaker make implementations (e.g. IRIX 6.5).
+ * tests/parallel-tests8.test: Likewise, plus a required related
+ change.
+ Reported by Ralf Wildenhues. The bugs have been there from the
+ first versions of the affected test scripts.
+
+2010-12-22 Stefano Lattarini <stefano.lattarini@gmail.com>
+
+ docs: cygnus mode doesn't require AM_CYGWIN32 macro.
+ * doc/automake.texi (Cygnus): Mode 'cygnus' does not require
+ the AM_CYGWIN32 macro (and indeed hasn't required it since at
+ least commit Release-1-2-31-g3038064 "merged changes from
+ Cygnus" of 1997-08-25).
+
+2010-12-22 Stefano Lattarini <stefano.lattarini@gmail.com>
+
+ distlinksbrk.test: Work around botched "make -k".
+ * tests/distlinksbrk.test: Run "make" multiple times and grep
+ its output each time for a single error message, rather than
+ running "make -k" one single time and grepping its output for
+ all the expected error messages. This should work around make
+ implementations with limited (broken?) `-k' support; for more
+ information, see these subthreads on the automake-patches list:
+ - 2010-11-15, "Testsuite failures on HP-UX 11.23",
+ <http://lists.gnu.org/archive/html/automake-patches/2010-11/msg00162.html>
+ - 2010-11-15, "Testsuite failures on IRIX 6.5",
+ <http://lists.gnu.org/archive/html/automake-patches/2010-11/msg00166.html>
+
+2010-12-21 Stefano Lattarini <stefano.lattarini@gmail.com>
+
+ Fix sed-related buglet in test "subdir5.test"
+ * tests/subdir5.test: Always terminate text passed to the
+ `i' sed command with a newline, to work around limitations
+ in e.g. older OpenBSD sed.
+
+2010-12-18 Stefano Lattarini <stefano.lattarini@gmail.com>
+
+ docs: fix blunder in example about python extension modules
+ * doc/automake.texi (Python): Use `quaternion_la_SOURCES',
+ not `quaternion_SOURCES', to declare the sources of python
+ extension module `quaternion.la'.
+
+2010-12-16 Stefano Lattarini <stefano.lattarini@gmail.com>
+
+ docs: list LTLIBRARIES among Automake primaries
+ * doc/automake.texi (Uniform): List `LTLIBRARIES' among
+ the Automake primaries.
+
+2010-12-14 Stefano Lattarini <stefano.lattarini@gmail.com>
+
+ Improve tests on generated portions of configure help screen.
+ * tests/help-depend.test: Grepping of configure help screen
+ relaxed to cater for possible line wrapping, and tightened in
+ other respects.
+ * tests/help-depend2.test: Likewise.
+ * tests/help-dmalloc.test: Likewise.
+ * tests/help-lispdir.test: Likewise.
+ * tests/help-maintainer.test: Likewise.
+ * tests/help-multilib.test: Likewise.
+ * tests/help-silent.test: Likewise.
+ * tests/help-upc.test: Likewise.
+ * tests/help-init.test: Grepping of configure help screen
+ tightened.
+
+2010-12-10 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
+
+ Avoid running installed automake from 'libtool --help'.
+ * tests/subobj9.test: Export AUTOCONF and AUTOMAKE.
+ Together with fixed Libtool, this fixes check-coverage to not
+ invoke installed automake.
+
+2010-11-25 Stefano Lattarini <stefano.lattarini@gmail.com>
+
+ Fix spurious failures in `silent*.test' for $CC != gcc
+ In some tests on automake-produced silent rules, we forced the
+ use of gcc depmode to improve testsuite coverage; but this has
+ unsurprisingly led to spurious failures when some non-GNU C
+ compilers were used. So we are now careful to require GCC in
+ tests that force gcc depmode.
+ From reports by Ralf Wildenhues.
+ * silent5.test: Test removed, its content split into ...
+ * silent-many-generic.test, silent-many-gcc.test: ... these new
+ sister tests, the latter of which forces gcc depmode and lists
+ "gcc" in $required.
+ * silentlex.test: Test removed, its content split into ...
+ * silent-lex-generic.test, silent-lex-gcc.test: ... these new
+ sister tests, the latter of which forces gcc depmode and lists
+ "gcc" in $required.
+ * silentyacc.test: Test removed, its content split into ...
+ * silent-yacc-generic.test, silent-yacc-gcc.test: ... these new
+ sister tests, the latter of which forces gcc depmode and lists
+ "gcc" in $required.
+ * tests/Makefile.am (TESTS): Updated.
+
+2010-11-21 Stefano Lattarini <stefano.lattarini@gmail.com>
+
+ Tests: consistently use "|| Exit 1" after ". ./defs".
+ * tests/autohdr.test: Use `. ./defs || Exit 1', not bare
+ `. ./defs', for consistency with other tests.
+ * tests/autohdr2.test: Likewise.
+ * tests/autohdr3.test: Likewise.
+ * tests/autohdr4.test: Likewise.
+ * tests/cond23.test: Likewise.
+ * tests/cond24.test: Likewise.
+ * tests/cond25.test: Likewise.
+ * tests/cond26.test: Likewise.
+ * tests/cond27.test: Likewise.
+ * tests/cond28.test: Likewise.
+ * tests/cond29.test: Likewise.
+ * tests/cond30.test: Likewise.
+ * tests/cond31.test: Likewise.
+ * tests/cond32.test: Likewise.
+ * tests/cond33.test: Likewise.
+ * tests/cond34.test: Likewise.
+ * tests/cond35.test: Likewise.
+ * tests/cond36.test: Likewise.
+ * tests/cond37.test: Likewise.
+ * tests/cond38.test: Likewise.
+ * tests/cond39.test: Likewise.
+ * tests/cond40.test: Likewise.
+ * tests/cond41.test: Likewise.
+ * tests/cond42.test: Likewise.
+ * tests/cond43.test: Likewise.
+ * tests/cond44.test: Likewise.
+ * tests/cond45.test: Likewise.
+ * tests/dollarvar.test: Likewise.
+ * tests/dollarvar2.test: Likewise.
+ * tests/hfs.test: Likewise.
+ * tests/libobj14.test: Likewise.
+ * tests/percent.test: Likewise.
+ * tests/percent2.test: Likewise.
+ * tests/phony.test: Likewise.
+ * tests/silent.test: Likewise.
+ * tests/silent2.test: Likewise.
+ * tests/silent3.test: Likewise.
+ * tests/silent4.test: Likewise.
+ * tests/silent5.test: Likewise.
+ * tests/silent6.test: Likewise.
+ * tests/silent7.test: Likewise.
+ * tests/silent9.test: Likewise.
+ * tests/silentcxx.test: Likewise.
+ * tests/silentf77.test: Likewise.
+ * tests/silentf90.test: Likewise.
+ * tests/silentlex.test: Likewise.
+ * tests/silentyacc.test: Likewise.
+
+ Avoid useless cleaning in some `silent*.test' tests.
+ * tests/silentf77.test: Removed useless calls to "make clean"
+ and "make maintainer-clean".
+ * tests/silentf90.test: Likewise.
+ * tests/silent3.test: Removed useless call to "make distclean".
+ * tests/silent4.test: Likewise.
+ * tests/silent9.test: Likewise.
+
+2010-11-19 Ian Lance Taylor <iant@google.com>
+
+ Sync config-ml.in from GCC.
+ * config-ml.in: Add Go support: treat GOC and GOCFLAGS like other
+ compiler/flag environment variables.
+
+2010-11-19 Stefano Lattarini <stefano.lattarini@gmail.com>
+
+ Automake::Config: remove extra trailing semicolon.
+ * lib/Automake/Config.in: Remove extra trailing semicolon.
+
+ help4.test: fix botched heading comment.
+ * tests/help4.test: Fixed the heading comment, since it
+ didn't correctly describe what checks the testcase was
+ supposed to perform.
+
+ help2.test: add checks on aclocal too.
+ * tests/help2.test: Check that also `aclocal --version' and
+ `aclocal --help' work with configure.in and acinclude.m4 both
+ broken.
+
+2010-11-17 Stefano Lattarini <stefano.lattarini@gmail.com>
+
+ Fix spurious failures of silent-rules tests with Sun Fortran.
+ * tests/silentf77.test: Strip from the make output some verbose
+ messages possibly printed by the SunStudio fortran compilers, to
+ avoid spurious failures. Add a trailing `:' command.
+ * tests/silentf90.test: Likewise.
+
+2010-11-17 Stefano Lattarini <stefano.lattarini@gmail.com>
+
+ Fix spurious failures of silent5.test with Sun Fortran.
+ * tests/silent5.test: Strip from the make output some verbose
+ messages possibly printed by the SunStudio fortran compilers,
+ to avoid spurious failures. This bug has been there from the
+ very first version of this test script.
+
+2010-11-16 Stefano Lattarini <stefano.lattarini@gmail.com>
+
+ Fix regression in colon{5,6}.test (failures on AIX 5.3).
+ * tests/colon5.test: Also substitute `@SHELL@' with `$SHELL' when
+ post-processing the generated Makefile.in, to work around a bug
+ of AIX 5.3 make which doesn't allow setting the `$(SHELL)' macro
+ on the commend line. Calls to `$MAKE' adjusted accordingly.
+ * tests/colon6.test: Likewise.
+ Regression introduced in commit v1.11-175-gf9fe878 "Modernize,
+ improve and/or extend tests `colon*.test", and reported by Ralf
+ Wildenhues.
+
+2010-11-16 Stefano Lattarini <stefano.lattarini@gmail.com>
+
+ Fix regression in ansi.test (failure on AIX 5.3).
+ * tests/ansi.test: Remove redundant hackish check done using a
+ hand-postprocessed Makefile.in. This check worked by setting
+ the `$(SHELL)' macro on the command line of make, but this is
+ not supported by the AIX 5.3 make implementation.
+ This bug has been lurking for a long time, and was activated by
+ commit v1.11-125-gc1f6cdb "Enable `errexit' shell flag in various
+ tests". Report by Ralf Wildenhues.
+
+2010-11-16 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
+
+ tests: avoid '##'-style comments inside recipe commands.
+ * tests/confh.test, tests/confh8.test: Remove
+ double-hash comments from makefile rule commands, they
+ are not part of the Automake API.
+
+2010-11-14 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
+
+ tests: work around dash quoting issue in case statements.
+ * tests/color.test, tests/color2.test: Quote variable in case
+ pattern, to avoid skipping tests with dash 0.5.5.1.
+
+2010-11-14 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
+
+ Rebuild menus in the manual.
+ * doc/automake.texi: Rebuild menus (using ^C ^U ^A in emacs).
+ Thanks to Ian Lance Taylor for the suggestion.
+
+ Fix install-strip when $(STRIP) contains several words.
+ * lib/am/install.am (install-strip): Update comment. Use
+ separate sub-make invocations for empty and nonempty $(STRIP),
+ to fix quoting issues.
+ * tests/strip2.test, tests/strip3.test: New tests.
+ * tests/Makefile.am (TESTS): Adjust.
+
+2010-11-10 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
+
+ Fix yaccdry.test failure: require bison.
+ * tests/yaccdry.test: Require bison.
+ Found by NixOS Hydra.
+
+2010-11-07 Stefano Lattarini <stefano.lattarini@gmail.com>
+
+ Fix a bug in variable concatenation with `+='.
+ * lib/Automake/VarDef.pm (append): Since the content of the
+ "appended-to" variable is going to be unconditionally normalized
+ later, simply separate the appended value with a single whitespace
+ character, instead of trying to be uselessly smarter by using
+ escaped newlines. This fixes a bug in which extra backslashes
+ where erroneously inserted in the variable's final value.
+ * tests/pluseq11.test: New test, exposing the bug.
+ * tests/Makefile.am (TESTS): Update.
+ Reported by Andy Wingo.
+
+2010-11-06 Stefano Lattarini <stefano.lattarini@gmail.com>
+
+ Fix bug in rules for creating vala vapi/header files.
+ * automake.in (lang_vala_finish_target): Add forgotten "fi" in an
+ if control structure in a generated make rules. Bug introduced
+ by previous commit `v1.11-221-gd7c1679', and revealed by failure
+ of test `vala2.test'.
+
+2010-11-01 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
+
+ Fix and document rules to not touch the tree with `make -n'.
+ * doc/automake.texi (Multiple Outputs): Document the problem of
+ modifications during dry-run execution, propose solution.
+ * NEWS: Update.
+ * automake.in (lang_vala_finish_target): Split recipe so the
+ stamp file is not removed with GNU `make -n'.
+ (lang_yacc_target_hook): Separate removal of parser output file
+ and header remaking.
+ * lib/am/lisp.am ($(am__ELCFILES)): Determine whether -n was
+ passed to make, take care not to remove any files in that case.
+ * lib/am/remake-hdr.am (%CONFIG_H%): Separate removal of
+ %STAMP% file from induced remaking of config header.
+ * tests/autohdrdry.test, tests/lispdry.test, tests/yaccdry.test:
+ New tests.
+ * tests/Makefile.am (TESTS): Update.
+
+2010-11-01 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
+
+ Add FAQ entry for bug reporting instructions.
+ * doc/automake.texi (Reporting Bugs): New section.
+ (Introduction): Refer to it.
+
+2010-10-04 Stefano Lattarini <stefano.lattarini@gmail.com>
+
+ Add support for newer python versions.
+ * m4/python.m4 (AM_PATH_PYTHON): Add python2.7 and python3.2 to
+ _AM_PYTHON_INTERPRETER_LIST. Since we are at it, break a long
+ line and fix indentation.
+ * THANKS: Updated.
+ From a report by Thomas Klausner.
+
+ Add test for `AM_WITH_DMALLOC' macro.
+ * tests/dmalloc.test: New test.
+ * tests/Makefile.am (TESTS): Update.
+
+ Fix nits and bugs in tests `help*.test'.
+ * tests/help4.test: Fix broken sed commands used to strip `-W...'
+ flags away from "$AUTOMAKE" and "$ACLOCAL".
+ * tests/help3.test: Likewise, and fix a botched comment.
+ * tests/help.test: Likewise. Also, use "AUTOMAKE_fails ..."
+ instead of "$AUTOMAKE ... && Exit 1", for consistency and to
+ please maintainer-check.
+ * tests/help2.test: Likewise.
+
+2010-10-03 Stefano Lattarini <stefano.lattarini@gmail.com>
+ Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
+
+ Improve tests `help*.test' (also fixes maintcheck failures).
+ * tests/help.test: To run automake, use `$AUTOMAKE' with all `-W'
+ flags stripped away rather than hard-coded `automake-$APIVERSION',
+ to better honour user-overrides. Similarly for aclocal.
+ * tests/help2.test: Likewise.
+ * tests/help3.test: Likewise.
+ * tests/help4.test: Likewise.
+
+2010-10-03 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
+
+ Document and fix expansion of variables before rules.
+ * doc/automake.texi (General Operation): Document that variables
+ are expanded before rules.
+ * lib/am/check.am (am__check_post): Reword a bit so it does not
+ get matched as a rule.
+ Suggestion by Ben Pfaff.
+
+2010-10-02 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
+
+ Revert "parallel-tests: avoid command-line length limit issue."
+ This reverts commit 24e3b4ee2f8cb9f72dd94a05a893f3d4e88b7835,
+ because it re-opened the bug fixed by v1.11-10-g218e678.
+
+ 2010-09-07 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
+
+ parallel-tests: avoid command-line length limit issue.
+ * automake.in (handle_tests): New argument $makefile, new
+ substitution %MAKEFILE%.
+ (generate_makefile): Adjust.
+ * lib/am/check.am [%?PARALLEL_TESTS%] (check-TESTS): Pass
+ sanitized TEST_LOGS value as makefile snippet on standard
+ input to $(MAKE), to avoid exceeding the command line limit on
+ w32 (MSYS).
+ * NEWS: Update.
+ Report by Bob Friesenhahn.
+
+2010-09-26 Stefano Lattarini <stefano.lattarini@gmail.com>
+
+ Extend tests on `--help' and `--version' options.
+ * tests/help.test: Create a new empty directory and chdir into
+ it, rather than removing already present files. Run the aclocal
+ and automake wrapper scripts directly, instead of relying on
+ $AUTOMAKE and $ACLOCAL. Be sure to correctly match literal dots
+ in aclocal's and automake's stderr. Add a trailing `:' command.
+ * tests/help2.test: New test, checking that options `--help' and
+ `--version' works in directories with broken `configure.in'.
+ * tests/help3.test: New test, checking that options `--help' and
+ `--version' take precedence on the other options.
+ * tests/help4.test: New test, checking that the first among the
+ `--help' and `--version' options to be specified on the command
+ line wins.
+ * tests/Makefile.am (TESTS): Updated.
+
+2010-09-25 Stefano Lattarini <stefano.lattarini@gmail.com>
+
+ Testsuite: Use `$PATH_SEPARATOR', not `:', when extending PATH.
+ * tests/compile2.test: Do no uselessly (implicitly) repeat the
+ computation of PATH_SEPARATOR again.
+ * tests/instmany-mans.test: Use `$PATH_SEPARATOR', not `:', when
+ extending/redefining PATH.
+ * tests/instmany-python.test: Likewise.
+ * tests/instmany.test: Likewise.
+ * tests/man4.test: Likewise.
+ * tests/mkinst3.test: Likewise.
+ * tests/mmodely.test: Likewise.
+ * tests/multlib.test: Likewise.
+ * tests/txinfo30.test: Likewise.
+ * tests/README (Section "Writing test cases" subsection "Do"):
+ Updated.
+ * Makefile.am (sc_tests_PATH_SEPARATOR): New maintainer check.
+ (syntax_check_rules): Updated.
+
+ Testsuite: new variables `$PATH_SEPARATOR' and `$APIVERSION'.
+ * tests/defs.in ($APIVERSION): New AC_SUBST'd variable.
+ ($ACLOCAL, $AUTOMAKE): Use it.
+ ($PATH_SEPARATOR): New AC_SUBST'd variables.
+ ($PATH): Use it.
+
+2010-09-22 Stefano Lattarini <stefano.lattarini@gmail.com>
+
+ Manual: be more agnostic w.r.t. version control system used.
+ * doc/automake.texi (Basics of Distribution): Also refer to `.svn'
+ directories as a type of probably-unwanted files that are copied
+ regardless when adding directories to EXTRA_DIST.
+ (The dist Hook): Show a dist-hook example which removes Subversion
+ `.svn' private directories from distdir, rather than CVS private
+ directories.
+ (missing and AM_MAINTAINER_MODE): Try to be more agnostic w.r.t.
+ the version control system used.
+
+ Manual: index refer to target "git-dist", not "cvs-dist".
+ * doc/automake.texi (General Operation): Index the non-standard
+ example about "git-dist" under the "git-dist" label, not under
+ the "cvs-dist" one.
+
+ Perl modules: remove references to "Automake CVS repository".
+ * lib/Automake/Channels.pm: Update comments to refer to "Automke's
+ git repository" rather than to "Automake's CVS repository".
+ * lib/Automake/Configure_ac.pm: Likewise.
+ * lib/Automake/FileUtils.pm: Likewise.
+ * lib/Automake/Struct.pm: Likewise.
+ * lib/Automake/XFile.pm: Likewise.
+ * lib/Automake/Version.pm (=head1 DESCRIPTION): Refer to "git
+ branches" rather than "CVS branches".
+
+ Remove obsolete .cvsignore files.
+ * .cvsignore, doc/.cvsignore, lib/.cvsignore, lib/am/.cvsignore,
+ lib/Automake/.cvsignore, lib/Automake/tests/.cvsignore,
+ m4/.cvsignore, tests/.cvsignore: Files deleted. Even when using
+ savannah's CVS readonly mirror there's no way to commit back to
+ the real repository, so this files are not worth maintaining or
+ keeping around.
+
+2010-09-21 Stefano Lattarini <stefano.lattarini@gmail.com>
+
+ * m4/dmalloc.m4: Bump serial number and copyright years.
+
+2010-09-20 Stefano Lattarini <stefano.lattarini@gmail.com>
+
+ Fix broken link in `AM_WITH_DMALLOC' help screen.
+ * m4/dmalloc.m4 (AM_WITH_DMALLOC): Refer only to the dmalloc site
+ `http://www.dmalloc.com', not to the dmalloc tarball there (which
+ seems to have been removed, substituted by multiple release
+ tarballs now).
+
+2010-09-17 Eric Blake <eblake@redhat.com>
+
+ Avoid triple-space after period.
+ * automake.in (handle_single_transform): Avoid 3 spaces at
+ sentence end.
+ * ChangeLog.03: Likewise.
+ * lib/Automake/ChannelDefs.pm: Likewise.
+ * lib/Automake/Channels.pm (_print_message): Likewise.
+ * lib/Automake/Rule.pm (rule): Likewise.
+ * lib/Automake/Variable.pm (var): Likewise.
+ * lib/am/distdir.am: Likewise.
+ * tests/insthook.test: Likewise.
+
+2010-09-15 Stefano Lattarini <stefano.lattarini@gmail.com>
+
+ Test automake-generated portions of configure help screen.
+ * tests/help-depend.test: New test.
+ * tests/help-depend2.test: Likewise.
+ * tests/help-dmalloc.test: Likewise.
+ * tests/help-init.test: Likewise.
+ * tests/help-lispdir.test: Likewise.
+ * tests/help-maintainer.test: Likewise.
+ * tests/help-multilib.test: Likewise.
+ * tests/help-regex.test: Likewise.
+ * tests/help-silent.test: Likewise.
+ * tests/help-upc.test: Likewise.
+ * tests/mmode.test: Remove tests on `configure --help' output,
+ they are superseded by tests in `help-maintainer.test'.
+ * tests/Makefile.am (TESTS): Update.
+
+2010-09-14 Stefano Lattarini <stefano.lattarini@gmail.com>
+
+ * tests/README: Don't put GCS mandated tools in $required.
+
+2010-09-13 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
+
+ * HACKING: Hint at old commits with `git describe' output.
+
+2010-09-12 Stefano Lattarini <stefano.lattarini@gmail.com>
+
+ Fix regression in test `colon4.test'.
+ * tests/colon4.test: Fix botched editing to `configure.in'
+ that made the test useless. Since we are at it, improve
+ comments and make grepping of generated Makefile.in slightly
+ stricter.
+ Regression introduced by change "Modernize, improve and/or
+ extend tests `colon*.test" (Stefano Lattarini, 2010-08-08).
+
+2010-09-08 Stefano Lattarini <stefano.lattarini@gmail.com>
+
+ Do not require "gzip" explicitly in tests.
+ The gzip utility is simply expected to be present on any decent
+ target system for Automake. So it's pointless to put it in
+ $required.
+ * tests/install2.test ($required): Do not require "gzip".
+ * tests/lex3.test: Likewise.
+ * tests/pr9.test: Likewise.
+ From a suggestion by Ralf Wildenhues.
+
+ Make some `confh*.test' tests more "semantic" (plus tweakings).
+ * tests/confh.test: Run "autoconf", "configure" and "make check",
+ instead of munging/grepping the generated `Makefile.in'.
+ * tests/confh4.test: Relax the grepping of Makefile.in w.r.t.
+ white spaces. Do not create useless dummy source file `foo.c'
+ and useless dummy header file `acconfig.h'.
+ (configure.in): Remove superfluous call to `AC_OUTPUT'.
+ * tests/confh6.test: Add trailing `:' command.
+ * tests/confh7.test: In comments, add reference to ...
+ * tests/confh8.test: ... this new test, "semantic" sister
+ of `confh7.test'.
+ * tests/Makefile.am (TESTS): Updated.
+ Prompted by a report from Ralf Wildenhues.
+
+ Remove useless whitespace padding in XFAIL_TESTS definition.
+ * tests/Makefile.am (XFAIL_TESTS): Remove whitespace padding.
+
+2010-09-07 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
+
+ parallel-tests: avoid command-line length limit issue.
+ * automake.in (handle_tests): New argument $makefile, new
+ substitution %MAKEFILE%.
+ (generate_makefile): Adjust.
+ * lib/am/check.am [%?PARALLEL_TESTS%] (check-TESTS): Pass
+ sanitized TEST_LOGS value as makefile snippet on standard
+ input to $(MAKE), to avoid exceeding the command line limit on
+ w32 (MSYS).
+ * NEWS: Update.
+ Report by Bob Friesenhahn.
+
+ Posix 2008 requires make to set errexit.
+ * lib/am/check.am: Update comment.
+
+2010-08-27 Stefano Lattarini <stefano.lattarini@gmail.com>
+
+ Fix bug in test missing6.test.
+ * tests/missing6.test: Fix the hack used to edit `configure.in',
+ to avoid producing a configure script that breaks with shells
+ that do not support $LINENO. Also throw in a couple of cosmetic
+ changes.
+
+2010-08-21 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
+
+ Improve robustness of mdate-sh script.
+ * lib/mdate-sh: Sanitize zsh behavior on startup, to ensure
+ $ls_command is word-split properly upon invocation.
+ (error): New function.
+ (main): Use it. Improve error checking to avoid endless loop
+ in case $ls_command gave bogus output. Fix eval quotation.
+ * tests/mdate6.test: New test, to expose eval quotation error.
+ * tests/Makefile.am: Update.
+
+2010-08-18 Stefano Lattarini <stefano.lattarini@gmail.com>
+
+ Fix potential regressions in depcomp{3,5}.test.
+ * tests/depcomp3.test: Do not uselessly escape the character `$'
+ in makefile rules, when it's used to expand a make macro.
+ * tests/depcomp5.test: Likewise.
+
+2010-08-17 Stefano Lattarini <stefano.lattarini@gmail.com>
+ Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
+
+ Docs: clarify how to avoid automatic dependencies tracking.
+ * doc/automake.texi (Automatic dependency tracking): Mention that
+ automatic dependencies tracking is enabled by default, but that
+ the package developer can disable it altogether. Add a reference
+ to the proper section for a more in-depth explanation.
+
+ Fix typo in manual (`Makefile.in' instead of `Makefile.am').
+ * doc/automake.texi (Automatic dependency tracking): Fix typo.
+
+2010-08-16 Bruno Haible <bruno@clisp.org>
+
+ Don't hide the table of contents.
+ * doc/automake.texi: Move the table of contents to the beginning.
+
+2010-08-10 Stefano Lattarini <stefano.lattarini@gmail.com>
+
+ Tweak and/or extend some `acloca*.test' tests.
+ * tests/aclocal8.test: Ensure verbose printing of captured
+ output.
+ * tests/aclocal.test: Likewise. Also, add trailing `:'
+ command.
+ * tests/acloca19.test: Likewise.
+ * tests/aclocal5.test: Add trailing `:' command, and prefer
+ `$me' over hard-coded test name.
+ * tests/aclocal6.test: Likewise.
+ * tests/aclocal18.test: Add trailing `:' command, and make
+ some grepping slightly stricter.
+ * tests/acloca14.test: Likewise. Also, prefer `diff' over
+ `cmp', and add some "cosmetic" blank lines.
+
+2010-08-09 Stefano Lattarini <stefano.lattarini@gmail.com>
+
+ Tweak and extend tests `pr[!0-9]*.test'.
+ * tests/primary3.test: Add trailing `:' command.
+ * tests/primary.test: Make grepping of Automake's stderr stricter.
+ Also, add trailing `:' command, and cosmetic changes in spacing.
+ * tests/primary2.test: Likewise.
+ * tests/prefix.test: Enable `errexit' shell flags, and related
+ changes. Add a trailing `:' command.
+ * tests/proginst.test: Likewise.
+
+ Modernize, improve and extend tests for PR (`pr[0-9]*.test').
+ * tests/pr2.test: Add trailing `:' command.
+ * tests/pr229.test: Likewise.
+ * tests/pr401.test: Likewise.
+ * tests/pr401b.test: Likewise.
+ * tests/pr401c.test: Likewise.
+ * tests/pr300-prog.test: Likewise, plus cosmetic changes in
+ spacing.
+ * tests/pr300-lib.test: Likewise.
+ * tests/pr300-ltlib.test: Likewise, and ensure verbose printing
+ of captured make stdout.
+ * tests/pr211.test: Add trailing `:' command. Also, use the
+ `configure.in' stub created by ./defs, rather than writing it
+ from scratch.
+ * tests/pr204.test: Likewise, plus cosmetic spacing changes.
+ * tests/pr287.test: Likewise, and move setting of `errexit' shell
+ flag earlier in the script (just after inclusion of ./defs).
+ * tests/pr220.test: Make grepping of Automake's stderr stricter.
+ Also, add trailing `:' command, and cosmetic changes in spacing.
+ * tests/pr224.test: Move setting of `errexit' shell flag earlier
+ in the script (just after inclusion of ./defs). Do not export
+ `CC=gcc' to configure explicitly (it's already exported globally
+ in ./defs, since we have "gcc" in $required). Use the stub for
+ `configure.in' created by ./defs, rather than writing it from
+ scratch. Do not create dummy files required by "gnu" mode (e.g.
+ README, NEWS), since we run automake in foreign mode anyway.
+ * tests/pr72.test: Enable `errexit' shell flags, and related
+ changes. Extend existing checks a bit.
+ * tests/pr9.test: Likewise. Also, avoid obsolescent constructs in
+ the generated `configure.in', and extend existing checks over the
+ generated tarball a bit.
+ * tests/pr87.test: Enable `errexit' shell flags, and related
+ changes. Add a trailing `:' command. Also, do not create dummy
+ files required by "gnu" mode (e.g. README, NEWS), since we run
+ automake in foreign mode anyway.
+ * tests/pr243.test: Avoid obsolescent constructs in the generated
+ `configure.in'. Enable the `errexit' shell flag, and related
+ changes. Cosmetic changes to spacing, add trailing `:' command,
+ and add a "FIXME" comment.
+ * tests/pr266.test: Likewise, and add explicit command line switch
+ `--enable-dependecy-tracking' to the ./configure call.
+ * tests/pr279.test: Avoid obsolescent constructs in the generated
+ `configure.in'; also, use the `configure.in' stub created by
+ ./defs, rather than writing it from scratch. Enable `errexit'
+ shell flag, and related changes. Add trailing `:' command.
+ * tests/pr279-2.test: Likewise, and make grepping of Makefile.in
+ stricter.
+ * tests/pr307.test: Move setting of `errexit' shell flag earlier
+ in the script (just after inclusion of ./defs). Escape literal
+ dots in grep regular expressions. Also, add a trailing `:'
+ command, and cosmetic changes to spacing.
+
+ Tests for PR: add excerpts from original bug report, for clarity.
+ * tests/pr2.test: Ditto.
+ * tests/pr9.test: Likewise.
+ * tests/pr72.test: Likewise.
+ * tests/pr87.test: Likewise.
+ * tests/pr211.test: Likewise.
+ * tests/pr220.test: Likewise.
+ * tests/pr224.test: Likewise.
+ * tests/pr229.test: Likewise.
+ * tests/pr243.test: Likewise.
+ * tests/pr266.test: Likewise.
+ * tests/pr279.test: Likewise, and tell to keep it in sync
+ with its sister test.
+ * tests/pr279-2.test: Likewise.
+
+2010-08-08 Stefano Lattarini <stefano.lattarini@gmail.com>
+
+ Tweak, extend and improve tests `cond[a-z]*.test'.
+ * tests/condd.test: Add trailing `:' command. Typofix in
+ comment.
+ * tests/condhook.test: Make sure target `install-data-hook' is
+ not called by `make install', but that data files are installed.
+ Use proper m4 quoting in configure.in. Add trailing `:' command.
+ * tests/condhook2.test: New test, sister test of condhook, with
+ inverted semantic.
+ * tests/condinc2.test: Use proper m4 quoting in configure.in.
+ Prefer trailing `:' command over trailing `Exit 0'.
+ * tests/condman2.test: Enable errexit shell flag, and related
+ changes. Add trailing `:' command.
+ * tests/condman.test: Likewise. Also, do not create useless
+ dummy manpages, and use proper m4 quoting in configure.in.
+ * tests/condman3.test: New test, similar to condman.test, but
+ it also runs ./configure and "make install", and check the
+ installed files.
+ * tests/Makefile.am (TESTS): Updated.
+
+ Modernize, improve and/or extend tests `colon*.test.
+ * tests/colon.test: Rely on the `configure.in' stub created by
+ `./defs', rather than writing one from scratch. Do not create
+ a useless dummy file. Add trailing `:' command.
+ * tests/colon4.test: Enable the `errexit' shell flag, and
+ related changes. Rely on the `configure.in' stub created by
+ `./defs', rather than writing one from scratch.
+ * tests/colon7.test: Enable `errexit' shell flag, and related
+ changes. Improve the generated `configure.in' file. Add
+ trailing `:' command.
+ * tests/colon2.test: Likewise. Also, add some new checks.
+ * tests/colon5.test: Improve the generated `configure.in' file.
+ Add new, much deeper checks. Add trailing `:' command.
+ * tests/colon6.test: Likewise.
+ * tests/colon3.test: Add trailing `:' command. Remove useless
+ comments and echos. Improve the generated `configure.in' file.
+ make some grepping tests stricter. Add a "FIXME" comments about
+ planned improvements.
+
+ Improve and extend tests `asm*.test'.
+ * tests/asm.test: Use configure.in stub generated by ./defs,
+ and avoid obsoleted autoconf constructs. Make grepping of
+ Automake stderr stricter. Do not create useless source file.
+ Improve verbose messages. Minor cosmetic changes. Tell to
+ keep it in sync with other sister tests asm*.test.
+ * tests/asm2.test: Likewise.
+ * tests/asm3.test: Likewise.
+
+ Modernize, improve and/or extend test scripts `conf*.test'.
+ * tests/confh5.test: Cosmetic changes.
+ * tests/conff.test: Likewise.
+ * tests/confdeps.test: Likewise.
+ * tests/conflnk.test: Likewise.
+ * tests/conflnk2.test: Likewise.
+ * tests/confsub.test: Likewise.
+ * tests/confvar.test: Likewise, and make grepping of Makefile.in
+ stricter.
+ * tests/confvar2.test: Likewise.
+ * tests/conflnk3.test: Cosmetic changes. Re-enable a temporarily
+ disabled test (which didn't work with autoconf <= 2.59, but now we
+ are requiring autoconf 2.62, so...)
+ * tests/conflnk4.test: Cosmetic changes, and extend existing tests
+ accordingly to "TODO" comments.
+ * tests/conff2.test: Make grepping of Automake's stderr stricter.
+ Add some comments explaining why we don't use the `configure.in'
+ stub preset be ./defs.
+ * tests/confh.test: Use the `configure.in' stub created by ./defs,
+ rather than writing one from scratch, and do not call AC_OUTPUT.
+ Enable `errexit' shell flag, and related changes. Prefer diff over
+ cmp to compare text files. Prefer perl over sed to fetch the value
+ of $(DIST_COMMON) from Makefile.in. Make grepping of the contents
+ of $(DIST_COMMON) stricter.
+ * tests/confh4.test: Use the `configure.in' stub created by ./defs,
+ rather than writing one from scratch. Make grepping of Makefile.in
+ stricter.
+ * tests/confh5.test: Make grepping of `config.h' stricter. Add a
+ comment.
+ * tests/configure.test: Avoid obsolescent constructs in generated
+ `configure.ac'. Do not write `configure.in' two times. Escape
+ literal dots in grep regular expressions.
+ * tests/confincl.test: Enable `errexit' shell flag, and related
+ changes. Prefer fgrep over grep. Other cosmetic changes.
+ * tests/config.test: Renamed to ...
+ * tests/confh6.test: ... this. Fix m4 quoting in `configure.in',
+ and make grepping of `config.h' and `config.h.in' stricter.
+ * tests/conf2.test: Renamed ...
+ * tests/confh7.test: ... to this. Use the `configure.in' stub
+ created by ./defs, rather than writing one from scratch. Try to
+ run the checks both with and without AC_PROG_CC and AC_OUTPUT in
+ `configure.in'.
+ * tests/Makefile.am (TESTS): Updated.
+
+ Minor improvements and fixes in tests `depcomp*.test'.
+ * tests/depcomp.test: Do not create useless dummy source files.
+ Add a trailing `:' command.
+ * tests/depcomp2.test: Use `unset' on the CFLAG variable to ensure
+ it's not in in the environment, rather than exporting it with an
+ empty value. Do not pass CC=gcc to configure, as that's already
+ done in ./defs since we have gcc in $required. Ensure verbose
+ printing of captured stderr, and normalize its checking. Add a
+ trailing `:' command.
+ * tests/depcomp3.test: Quote literal dots and dollar characters in
+ grep regexps. Always use `: >' rather than `touch' to create empty
+ files. Explicitly declare phony targets as such in the created
+ Makefile.am. Add a trailing `:' command.
+ * tests/depcomp4.test: Quote literal dots and dollar characters in
+ grep regexp. Explicitly declare phony targets as such in the
+ created Makefile.am. Ensure verbose printing of captured makes'
+ stoud/stderr. Add a trailing `:' command.
+ * tests/depcomp5.test: Move setting of `errexit' shell flag earlier
+ in the script (just after inclusion of ./defs). Quote literal dots
+ and dollar characters in grep regexps. Explicitly declare phony
+ targets as such in the created Makefile.am. Add a trailing `:'
+ command.
+ * tests/depcomp6.test: Consistently use m4 quoting in the generated
+ configure.in. Cosmetic fixes to spacing. Make the "dummy" `if'
+ statement required by OpenBSD's sh `set -e' more robust, and add
+ explanatory comments to it.
+ * tests/depcomp7.test: Likewise, and add a trailing `:' command.
+
+ Separate failing part of test `all.test'.
+ * tests/all.test: Keep only (x)failing part of the test. Working
+ checks moved out to ...
+ * tests/all2.test: ... this new test.
+ * tests/Makefile.am (TESTS): Updated.
+
+ Modernize, improve and extend tests `subobj*.test'.
+ * tests/subobjname.test: Add trailing `:' command.
+ * tests/subobj.test: Make grepping of `Makefile.in' stricter.
+ Escape literal dots in grep regexps.
+ * tests/subobj2.test: Add trailing `:' command. Do not use the
+ unportable fgrep option `-e'.
+ * tests/subobj3.test: Add trailing `:' command.
+ (configure.in): Use proper m4 quoting, and avoid obsolescent
+ constructs.
+ * tests/subobj8.test: Likewise. Also, enable `errexit' shell
+ flag, with related changes
+ * tests/subobj4.test: Likewise. Also, make grepping of
+ `Makefile.in' stricter.
+ * tests/subobj5.test: Add trailing `:' command. Move setting of
+ `errexit' shell flag earlier in the script (just after inclusion
+ of ./defs).
+ (configure.in): Use the stub created by `./defs', rather than
+ writing it from scratch, and avoid obsolescent constructs.
+ * tests/subobj6.test: Add trailing `:' command. Move setting of
+ `errexit' shell flag earlier in the script (just after inclusion
+ of ./defs). Do not create useless dummy ac-init file `f'.
+ * tests/subobj7.test: Do not create useless dummy ac-init file
+ `f'.
+ (configure.in): Use the stub created by `./defs', rather than
+ writing it from scratch, and avoid obsolescent constructs.
+ * tests/subobj9.test: Move setting of `errexit' shell flag earlier
+ in the script (just after inclusion of ./defs). Fail the test if
+ `make distcheck' fails. Ensure verbose printing of captured make
+ stdout. Avoid useless fork by doing simple grep instead of using
+ test -n "`COMMAND | grep ...`".
+ (configure.in): Normalize the call to AC_INIT w.r.t. other tests.
+ (Makefile.am): Explicitly mark target "print" as phony.
+ * tests/subobj10.test: Removed duplicated call to `set -e'. Add
+ trailing `:' command.
+ (configure.in): Normalize the call to AC_INIT w.r.t. other tests.
+
+ Remove a couple of obsoleted tests.
+ * tests/fpinstall.test: Removed.
+ * tests/fpinst2.test: Likewise.
+ * tests/Makefile.am (TESTS): Updated.
+
+ Bootstrap: updated HACKING entry.
+ * HACKING ("Working with git"): Explain how to override the
+ autoconf and autom4te programs used by the bootstrap process.
+
+ Bootstrap: fixlet.
+ * bootstrap: Do not remove `lib/Automake/Config.pm' anymore,
+ since we don't generate it. Correctly quote arguments of
+ `eval' builtin. Fixed a botched error message. Removed an
+ extra blank line.
+
+ Bootstrap: don't search perl in $PATH.
+ * bootstrap: Do not explicitly search perl in $PATH anymore.
+ ($PATH_SEPARATOR): Removed, it's no more needed.
+
+ Bootstrap: let the user choose which autoconf to use.
+ * bootstrap ($AUTOCONF): New variable, from the environment.
+ ($AUTOM4TE): Likewise, for clarity.
+ Use "$AUTOCONF" instead of calling "autoconf" directly.
+
+ Minor improvements to tests ar*.test.
+ * tests/ar.test: Add trailing `:' command.
+ * tests/ar2.test: Likewise, and make grepping of generated
+ Makefile.in stricter.
+
+2010-08-08 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
+
+ Fix maintainer-check failure.
+ * tests/cond5.test: Quote sleep argument, this isn't about
+ time stamp differences.
+
+ Sync auxiliary files from upstream.
+ * lib/config.guess, lib/config.sub, lib/texinfo.tex:
+ Sync from upstream.
+
+2010-08-06 Stefano Lattarini <stefano.lattarini@gmail.com>
+
+ Work around a nasty bug (segfault) of Solaris make.
+ * lib/am/check.am (recheck, recheck-html): Trim trailing spaces
+ from $list, to avoid triggering a nasty bug (potential segfault)
+ on Solaris make.
+
+2010-08-06 Peter Rosin <peda@lysator.liu.se>
+
+ Make cond5.test more robust on MSYS.
+ * tests/cond5.test: Add delay before the first kill attempt to
+ cater for problems with MSYS bash.
+
+2010-07-31 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
+
+ Add example git work flow; discuss merge --log in HACKING.
+ * HACKING: Update.
+ Suggestion by Stefano Lattarini.
+
+ Add more hints for debugging make rules.
+ * doc/automake.texi (Debugging Make Rules): Show command to find
+ out expanded values of variables; point to makefile debugger.
+ * THANKS: Update.
+ Prompted by suggestion from Ludovic Courtès and Andy Wingo.
+
+2010-07-27 Patrick Welche <prlw1@cam.ac.uk> (tiny change)
+
+ Fix typo in the manual.
+ * doc/automake.texi (Scripts): Fix typo.
+
+2010-07-27 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
+
+ Document current policy for development with git.
+ * HACKING (Working with git): Overhaul.
+ Prompted by suggestion from Stefano Lattarini.
+
+ Fix AM_COND_IF for gone-invalid condition shell expression.
+ * m4/cond-if.m4 (AM_COND_IF): test contents of $COND_TRUE
+ variable, rather than re-evaluating the shell expression for
+ the condition.
+ * tests/cond40.test: Extend test.
+ * NEWS: Update.
+
+ Avoid syntax error if IF-TRUE part of AM_COND_IF expands empty.
+ * m4/cond-if.m4 (AM_COND_IF): Ensure IF-TRUE part is never empty
+ to avoid shell syntax error if the m4 expansion is empty.
+ * tests/cond40.test: Enhance test.
+
+ Coverage: bogus option to AM_INIT_AUTOMAKE.
+ * tests/init2.test: New test.
+ * tests/Makefile.am: Update.
+
+2010-07-21 Stefano Lattarini <stefano.lattarini@gmail.com>
+
+ Modernize and improve test scripts `subdir*.test'.
+ * tests/subdir.test: Enable `errexit' shell flag, and related
+ changes. Use the `configure.in' stub created by `./defs',
+ rather than writing one from scratch.
+ * tests/subdir2.test: Likewise.
+ * tests/subdir4.test: Likewise.
+ * tests/subdir3.test: Enable `errexit' shell flag, and related
+ changes. Do not create useless dummy source files.
+ * tests/subdir5.test: Make grepping of Makefile.in (in topdir
+ and in subdirs) stricter. Some minor changes to keep it more
+ in sync with the related test `subdir8.test'.
+ * tests/subdir8.test: Likewise (but with the related test being
+ `subdir5.test' here).
+ * tests/subdir6.test: Cosmetic change in spacing.
+ * tests/subdir9.test: Define and use new variable `$distdir'. Add
+ trailing `:' command.
+ * tests/subdir10.test: Cosmetic consistency-related change.
+ * tests/subdirbuiltsources.test: Cosmetic changes in spacings.
+ (configure.in): Use stub created by `./defs', rather than writing
+ it from scratch. Do not use obsoleted and/or deprecated forms of
+ autoconf/automake macros.
+
+ Modernize and improve test scripts `dist*.test'.
+ * tests/distcleancheck.test: Do not add useless `-e' option to
+ a $MAKE call. Extend test by grepping stderr of make.
+ * tests/distcom2.test: Do not run the same test script on the
+ Makefile.in twice, but save its output in an intermediate file
+ instead. Make grepping of DIST_COMMON definition stricter.
+ Display the content of more files, to ease debugging. Add a
+ trailing `:' command. Improved heading comments w.r.t. sister
+ test(s).
+ * tests/distcom6.test: Likewise, and avoid to uselessly run
+ autoconf.
+ * tests/distcom3.test: Ensure verbose printing of captured stdout
+ and stderr. Make grepping of captured stderr stricter. Also,
+ add trailing `:' command.
+ * tests/distcom4.test: Declare the target `test' in the generated
+ Makefile.am as `.PHONY'. Display content of more files, to ease
+ debugging. Add trailing `:' command.
+ * tests/distcom5.test: Likewise. Also, factor out common sed
+ script in subroutine `extract_distcommon'.
+ * tests/distcom7.test: Prefer cat + here-doc over echo to write
+ test Makefile.am files. Add a trailing `:' command.
+ * tests/distname.test: Prefer `gzip -d' over `gunzip'. Move the
+ call to `set -e' earlier. Be stricter and more verbose in the
+ checking of the generated tarball.
+ (configure.in): Use the stub provided by ./defs, instead of
+ writing it from scratch. Avoid obsoleted constructs. Remove
+ useless call to `AM_PROG_CC_C_O'.
+ * tests/distdir.test: Various minor improvements/normalizations.
+ * tests/distlinks.test: Likewise.
+
+2010-07-18 Stefano Lattarini <stefano.lattarini@gmail.com>
+
+ Improve and extend test cond5.test.
+ * tests/cond5.test: Do not blindly sleep 60 seconds before polling
+ the background automake process, but poll it every 10 seconds for
+ at most 30 times (this makes the test both faster on good machines,
+ and more resilient to spurious timeout-due failures when in low
+ priority or on heavily-loaded systems).
+ Check also that automake writes the expected error messages on the
+ standard error.
+ Enable `errexit' flag, and related changes.
+ Rely on the `configure.in' stub created by `./defs', rather than
+ writing one from scratch.
+
+2010-06-26 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
+
+ Update program --help output to match current GCS.
+ * configure.ac: Set and substitute PACKAGE_URL if AC_PACKAGE_URL
+ is not defined, for compatibility to Autoconf < 2.64.
+ * Makefile.am (do_subst): Substitute PACKAGE_BUGREPORT and
+ PACKAGE_URL.
+ (sc_diff_automake_in_automake): Update number of diff lines for
+ additional substitutions.
+ * aclocal.in (usage): Use PACKAGE_BUGREPORT. Point to Automake
+ home page and GNU general help page.
+ * automake.in (usage): Likewise.
+ * doc/automake.texi: New flag PACKAGE_BUGREPORT, to factor email
+ address.
+ (Introduction, Creating amhello, amhello Explained, Options):
+ Use it throughout.
+ * lib/Automake/Makefile.am (do_subst): Substitute
+ PACKAGE_BUGREPORT.
+ * lib/Automake/Config.in ($PACKAGE_BUGREPORT): New global.
+ * lib/Automake/ChannelDefs.pm: Use it for footer of fatal
+ messages.
+
+ Clean up @var handling in the manual.
+ * doc/automake.texi: Throughout the manual, lower-case @var
+ names, replace a few one-character names.
+
+2010-06-26 Stefano Lattarini <stefano.lattarini@gmail.com>
+
+ Fix typo-related bug in test script silent5.test.
+ * tests/silent5.test: Use $EGREP, not $GREP (which is not even
+ defined).
+
+ Tests: remove useless repetitions of `foreign' automake option.
+ * tests/multlib.test (configure.in): Remove useless use of
+ `foreign' option in AM_INIT_AUTOMAKE (the `--foreign' option is
+ already in $AUTOMAKE by default, so no point in repeating it).
+ * tests/subobj10.test: Likewise.
+ * tests/subobj9.test: Likewise.
+ * tests/lex3.test (Makefile.am): Similarly, remove useless use
+ of `foreign' option in AUTOMAKE_OPTIONS.
+ * tests/lex5.test: Likewise.
+ * tests/pr279.test: Likewise.
+ * tests/pr279-2.test: Likewise.
+ * tests/specflg3.test: Likewise.
+ * tests/target-cflags.test: Likewise.
+
+ Drop useless requirement "gzip" in lex5.test.
+ * tests/lex5.test ($required): Do not list "gzip", as it's
+ never used.
+
+2010-06-24 Stefano Lattarini <stefano.lattarini@gmail.com>
+
+ Fix bugs in test script silent5.test.
+ * tests/silent5.test: Fixed a nasty bug (due to the use of grep
+ instead of egrep) that could have led to false negatives.
+
+2010-06-21 Stefano Lattarini <stefano.lattarini@gmail.com>
+
+ Add a test checking that distributed broken symlinks cause
+ `make dist' to fail.
+ * tests/distlinksbrk.test: New test.
+ * tests/Makefile.am (TESTS): Updated.
+
2010-06-21 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
Fix minor testsuite issues, update docs, for Yacc/Lex changes.