staging: iio: ad7816: Switch to the gpio descriptor interface
authorNishad Kamdar <nishadkamdar@gmail.com>
Wed, 17 Oct 2018 14:47:20 +0000 (20:17 +0530)
committerJonathan Cameron <Jonathan.Cameron@huawei.com>
Sun, 21 Oct 2018 14:51:56 +0000 (15:51 +0100)
Use the gpiod interface for rdwr_pin, convert_pin and busy_pin
instead of the deprecated old non-descriptor interface.

Note that Phil Reid identified that some of this code would never
have worked.  A follow up patch can fix that as this is just
a direct change of interface.

Signed-off-by: Nishad Kamdar <nishadkamdar@gmail.com>
Acked-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
drivers/staging/iio/adc/ad7816.c

index bf76a8620bdbc5fe5f1391033762251a45ace636..12c4e0ab4713f30e7f3f016012d42ce1fe0b7f3f 100644 (file)
@@ -7,7 +7,7 @@
  */
 
 #include <linux/interrupt.h>
-#include <linux/gpio.h>
+#include <linux/gpio/consumer.h>
 #include <linux/device.h>
 #include <linux/kernel.h>
 #include <linux/slab.h>
@@ -44,9 +44,9 @@
 
 struct ad7816_chip_info {
        struct spi_device *spi_dev;
-       u16 rdwr_pin;
-       u16 convert_pin;
-       u16 busy_pin;
+       struct gpio_desc *rdwr_pin;
+       struct gpio_desc *convert_pin;
+       struct gpio_desc *busy_pin;
        u8  oti_data[AD7816_CS_MAX + 1];
        u8  channel_id; /* 0 always be temperature */
        u8  mode;
@@ -61,28 +61,28 @@ static int ad7816_spi_read(struct ad7816_chip_info *chip, u16 *data)
        int ret = 0;
        __be16 buf;
 
-       gpio_set_value(chip->rdwr_pin, 1);
-       gpio_set_value(chip->rdwr_pin, 0);
+       gpiod_set_value(chip->rdwr_pin, 1);
+       gpiod_set_value(chip->rdwr_pin, 0);
        ret = spi_write(spi_dev, &chip->channel_id, sizeof(chip->channel_id));
        if (ret < 0) {
                dev_err(&spi_dev->dev, "SPI channel setting error\n");
                return ret;
        }
-       gpio_set_value(chip->rdwr_pin, 1);
+       gpiod_set_value(chip->rdwr_pin, 1);
 
        if (chip->mode == AD7816_PD) { /* operating mode 2 */
-               gpio_set_value(chip->convert_pin, 1);
-               gpio_set_value(chip->convert_pin, 0);
+               gpiod_set_value(chip->convert_pin, 1);
+               gpiod_set_value(chip->convert_pin, 0);
        } else { /* operating mode 1 */
-               gpio_set_value(chip->convert_pin, 0);
-               gpio_set_value(chip->convert_pin, 1);
+               gpiod_set_value(chip->convert_pin, 0);
+               gpiod_set_value(chip->convert_pin, 1);
        }
 
-       while (gpio_get_value(chip->busy_pin))
+       while (gpiod_get_value(chip->busy_pin))
                cpu_relax();
 
-       gpio_set_value(chip->rdwr_pin, 0);
-       gpio_set_value(chip->rdwr_pin, 1);
+       gpiod_set_value(chip->rdwr_pin, 0);
+       gpiod_set_value(chip->rdwr_pin, 1);
        ret = spi_read(spi_dev, &buf, sizeof(*data));
        if (ret < 0) {
                dev_err(&spi_dev->dev, "SPI data read error\n");
@@ -99,8 +99,8 @@ static int ad7816_spi_write(struct ad7816_chip_info *chip, u8 data)
        struct spi_device *spi_dev = chip->spi_dev;
        int ret = 0;
 
-       gpio_set_value(chip->rdwr_pin, 1);
-       gpio_set_value(chip->rdwr_pin, 0);
+       gpiod_set_value(chip->rdwr_pin, 1);
+       gpiod_set_value(chip->rdwr_pin, 0);
        ret = spi_write(spi_dev, &data, sizeof(data));
        if (ret < 0)
                dev_err(&spi_dev->dev, "SPI oti data write error\n");
@@ -129,10 +129,10 @@ static ssize_t ad7816_store_mode(struct device *dev,
        struct ad7816_chip_info *chip = iio_priv(indio_dev);
 
        if (strcmp(buf, "full")) {
-               gpio_set_value(chip->rdwr_pin, 1);
+               gpiod_set_value(chip->rdwr_pin, 1);
                chip->mode = AD7816_FULL;
        } else {
-               gpio_set_value(chip->rdwr_pin, 0);
+               gpiod_set_value(chip->rdwr_pin, 0);
                chip->mode = AD7816_PD;
        }
 
@@ -345,15 +345,9 @@ static int ad7816_probe(struct spi_device *spi_dev)
 {
        struct ad7816_chip_info *chip;
        struct iio_dev *indio_dev;
-       unsigned short *pins = dev_get_platdata(&spi_dev->dev);
        int ret = 0;
        int i;
 
-       if (!pins) {
-               dev_err(&spi_dev->dev, "No necessary GPIO platform data.\n");
-               return -EINVAL;
-       }
-
        indio_dev = devm_iio_device_alloc(&spi_dev->dev, sizeof(*chip));
        if (!indio_dev)
                return -ENOMEM;
@@ -364,34 +358,28 @@ static int ad7816_probe(struct spi_device *spi_dev)
        chip->spi_dev = spi_dev;
        for (i = 0; i <= AD7816_CS_MAX; i++)
                chip->oti_data[i] = 203;
-       chip->rdwr_pin = pins[0];
-       chip->convert_pin = pins[1];
-       chip->busy_pin = pins[2];
-
-       ret = devm_gpio_request(&spi_dev->dev, chip->rdwr_pin,
-                               spi_get_device_id(spi_dev)->name);
-       if (ret) {
-               dev_err(&spi_dev->dev, "Fail to request rdwr gpio PIN %d.\n",
-                       chip->rdwr_pin);
+
+       chip->rdwr_pin = devm_gpiod_get(&spi_dev->dev, "rdwr", GPIOD_IN);
+       if (IS_ERR(chip->rdwr_pin)) {
+               ret = PTR_ERR(chip->rdwr_pin);
+               dev_err(&spi_dev->dev, "Failed to request rdwr GPIO: %d\n",
+                       ret);
                return ret;
        }
-       gpio_direction_input(chip->rdwr_pin);
-       ret = devm_gpio_request(&spi_dev->dev, chip->convert_pin,
-                               spi_get_device_id(spi_dev)->name);
-       if (ret) {
-               dev_err(&spi_dev->dev, "Fail to request convert gpio PIN %d.\n",
-                       chip->convert_pin);
+       chip->convert_pin = devm_gpiod_get(&spi_dev->dev, "convert", GPIOD_IN);
+       if (IS_ERR(chip->convert_pin)) {
+               ret = PTR_ERR(chip->convert_pin);
+               dev_err(&spi_dev->dev, "Failed to request convert GPIO: %d\n",
+                       ret);
                return ret;
        }
-       gpio_direction_input(chip->convert_pin);
-       ret = devm_gpio_request(&spi_dev->dev, chip->busy_pin,
-                               spi_get_device_id(spi_dev)->name);
-       if (ret) {
-               dev_err(&spi_dev->dev, "Fail to request busy gpio PIN %d.\n",
-                       chip->busy_pin);
+       chip->busy_pin = devm_gpiod_get(&spi_dev->dev, "busy", GPIOD_IN);
+       if (IS_ERR(chip->busy_pin)) {
+               ret = PTR_ERR(chip->busy_pin);
+               dev_err(&spi_dev->dev, "Failed to request busy GPIO: %d\n",
+                       ret);
                return ret;
        }
-       gpio_direction_input(chip->busy_pin);
 
        indio_dev->name = spi_get_device_id(spi_dev)->name;
        indio_dev->dev.parent = &spi_dev->dev;