arm: zynq: Add identification string to Xilinx boards

It is good to see this string to make sure that u-boot which runs on the
board is the same which should run there.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

diff --git a/configs/zynq_zc702_defconfig b/configs/zynq_zc702_defconfig
index 0d0efc2..1d09701 100644 (file)
--- a/configs/zynq_zc702_defconfig
+++ b/configs/zynq_zc702_defconfig
@@ -2,6 +2,7 @@ CONFIG_ARM=y
 CONFIG_SYS_CONFIG_NAME="zynq_zc70x"
 CONFIG_ARCH_ZYNQ=y
 CONFIG_SYS_TEXT_BASE=0x4000000
+CONFIG_IDENT_STRING=" Xilinx Zynq ZC702"
 CONFIG_SPL_STACK_R_ADDR=0x200000
 CONFIG_DEFAULT_DEVICE_TREE="zynq-zc702"
 CONFIG_DEBUG_UART=y

diff --git a/configs/zynq_zc706_defconfig b/configs/zynq_zc706_defconfig
index 4b186c9..dbcb4de 100644 (file)
--- a/configs/zynq_zc706_defconfig
+++ b/configs/zynq_zc706_defconfig
@@ -2,6 +2,7 @@ CONFIG_ARM=y
 CONFIG_SYS_CONFIG_NAME="zynq_zc70x"
 CONFIG_ARCH_ZYNQ=y
 CONFIG_SYS_TEXT_BASE=0x4000000
+CONFIG_IDENT_STRING=" Xilinx Zynq ZC706"
 CONFIG_SPL_STACK_R_ADDR=0x200000
 CONFIG_DEFAULT_DEVICE_TREE="zynq-zc706"
 CONFIG_DEBUG_UART=y

diff --git a/configs/zynq_zc770_xm010_defconfig b/configs/zynq_zc770_xm010_defconfig
index 2b8fb3c..f38ce4f 100644 (file)
--- a/configs/zynq_zc770_xm010_defconfig
+++ b/configs/zynq_zc770_xm010_defconfig
@@ -1,6 +1,7 @@
 CONFIG_ARM=y
 CONFIG_ARCH_ZYNQ=y
 CONFIG_SYS_TEXT_BASE=0x4000000
+CONFIG_IDENT_STRING=" Xilinx Zynq ZC770 XM010"
 CONFIG_SPL_STACK_R_ADDR=0x200000
 CONFIG_DEFAULT_DEVICE_TREE="zynq-zc770-xm010"
 CONFIG_DEBUG_UART=y

diff --git a/configs/zynq_zc770_xm011_defconfig b/configs/zynq_zc770_xm011_defconfig
index 52ad66a..d462382 100644 (file)
--- a/configs/zynq_zc770_xm011_defconfig
+++ b/configs/zynq_zc770_xm011_defconfig
@@ -1,6 +1,7 @@
 CONFIG_ARM=y
 CONFIG_ARCH_ZYNQ=y
 CONFIG_SYS_TEXT_BASE=0x4000000
+CONFIG_IDENT_STRING=" Xilinx Zynq ZC770 XM011"
 CONFIG_SPL_STACK_R_ADDR=0x200000
 # CONFIG_SPL_FAT_SUPPORT is not set
 CONFIG_DEFAULT_DEVICE_TREE="zynq-zc770-xm011"

diff --git a/configs/zynq_zc770_xm012_defconfig b/configs/zynq_zc770_xm012_defconfig
index a8338f5..3893780 100644 (file)
--- a/configs/zynq_zc770_xm012_defconfig
+++ b/configs/zynq_zc770_xm012_defconfig
@@ -1,6 +1,7 @@
 CONFIG_ARM=y
 CONFIG_ARCH_ZYNQ=y
 CONFIG_SYS_TEXT_BASE=0x4000000
+CONFIG_IDENT_STRING=" Xilinx Zynq ZC770 XM012"
 CONFIG_SPL_STACK_R_ADDR=0x200000
 # CONFIG_SPL_FAT_SUPPORT is not set
 CONFIG_DEFAULT_DEVICE_TREE="zynq-zc770-xm012"

diff --git a/configs/zynq_zc770_xm013_defconfig b/configs/zynq_zc770_xm013_defconfig
index 01e2cfe..6e9c957 100644 (file)
--- a/configs/zynq_zc770_xm013_defconfig
+++ b/configs/zynq_zc770_xm013_defconfig
@@ -1,6 +1,7 @@
 CONFIG_ARM=y
 CONFIG_ARCH_ZYNQ=y
 CONFIG_SYS_TEXT_BASE=0x4000000
+CONFIG_IDENT_STRING=" Xilinx Zynq ZC770 XM013"
 CONFIG_SPL_STACK_R_ADDR=0x200000
 # CONFIG_SPL_FAT_SUPPORT is not set
 CONFIG_DEFAULT_DEVICE_TREE="zynq-zc770-xm013"