wait_op_done(host, TROP_US_DELAY, addr, islast);
}
-/* This function requests the NANDFC to initate the transfer
- * of data currently in the NANDFC RAM buffer to the NAND device. */
-static void send_prog_page(struct mxc_nand_host *host, uint8_t buf_id,
- int spare_only)
+static void send_page(struct mxc_nand_host *host, uint8_t buf_id,
+ int spare_only, unsigned int ops)
{
- DEBUG(MTD_DEBUG_LEVEL3, "send_prog_page (%d)\n", spare_only);
+ DEBUG(MTD_DEBUG_LEVEL3, "send_page (%d)\n", spare_only);
/* NANDFC buffer 0 is used for page read/write */
writew(buf_id, host->regs + NFC_BUF_ADDR);
writew(config1, host->regs + NFC_CONFIG1);
}
- writew(NFC_INPUT, host->regs + NFC_CONFIG2);
-
- /* Wait for operation to complete */
- wait_op_done(host, TROP_US_DELAY, spare_only, true);
-}
-
-/* Requests NANDFC to initated the transfer of data from the
- * NAND device into in the NANDFC ram buffer. */
-static void send_read_page(struct mxc_nand_host *host, uint8_t buf_id,
- int spare_only)
-{
- DEBUG(MTD_DEBUG_LEVEL3, "send_read_page (%d)\n", spare_only);
-
- /* NANDFC buffer 0 is used for page read/write */
- writew(buf_id, host->regs + NFC_BUF_ADDR);
-
- /* Configure spare or page+spare access */
- if (!host->pagesize_2k) {
- uint32_t config1 = readw(host->regs + NFC_CONFIG1);
- if (spare_only)
- config1 |= NFC_SP_EN;
- else
- config1 &= ~NFC_SP_EN;
- writew(config1, host->regs + NFC_CONFIG1);
- }
-
- writew(NFC_OUTPUT, host->regs + NFC_CONFIG2);
+ writew(ops, host->regs + NFC_CONFIG2);
/* Wait for operation to complete */
wait_op_done(host, TROP_US_DELAY, spare_only, true);
break;
case NAND_CMD_PAGEPROG:
- send_prog_page(host, 0, host->spare_only);
+ send_page(host, 0, host->spare_only, NFC_INPUT);
if (host->pagesize_2k) {
/* data in 4 areas datas */
- send_prog_page(host, 1, host->spare_only);
- send_prog_page(host, 2, host->spare_only);
- send_prog_page(host, 3, host->spare_only);
+ send_page(host, 1, host->spare_only, NFC_INPUT);
+ send_page(host, 2, host->spare_only, NFC_INPUT);
+ send_page(host, 3, host->spare_only, NFC_INPUT);
}
break;
/* send read confirm command */
send_cmd(host, NAND_CMD_READSTART, true);
/* read for each AREA */
- send_read_page(host, 0, host->spare_only);
- send_read_page(host, 1, host->spare_only);
- send_read_page(host, 2, host->spare_only);
- send_read_page(host, 3, host->spare_only);
+ send_page(host, 0, host->spare_only, NFC_OUTPUT);
+ send_page(host, 1, host->spare_only, NFC_OUTPUT);
+ send_page(host, 2, host->spare_only, NFC_OUTPUT);
+ send_page(host, 3, host->spare_only, NFC_OUTPUT);
} else
- send_read_page(host, 0, host->spare_only);
+ send_page(host, 0, host->spare_only, NFC_OUTPUT);
break;
case NAND_CMD_READID: