*
* The message objects 1..14 can be used for TX and RX while the message
* objects 15 is optimized for RX. It has a shadow register for reliable
- * data receiption under heavy bus load. Therefore it makes sense to use
+ * data reception under heavy bus load. Therefore it makes sense to use
* this message object for the needed use case. The frame type (EFF/SFF)
* for the message object 15 can be defined via kernel module parameter
* "msgobj15_eff". If not equal 0, it will receive 29-bit EFF frames,
/**
* can_rx_unregister - unsubscribe CAN frames from a specific interface
- * @dev: pointer to netdevice (NULL => unsubcribe from 'all' CAN devices list)
+ * @dev: pointer to netdevice (NULL => unsubscribe from 'all' CAN devices list)
* @can_id: CAN identifier
* @mask: CAN mask
* @func: callback function on filter match
/* mark as used and throttled by default */
lastdata->can_dlc |= (RX_RECV|RX_THR);
- /* throtteling mode inactive ? */
+ /* throttling mode inactive ? */
if (!op->kt_ival2.tv64) {
/* send RX_CHANGED to the user immediately */
bcm_rx_changed(op, lastdata);
if (hrtimer_active(&op->thrtimer))
return;
- /* first receiption with enabled throttling mode */
+ /* first reception with enabled throttling mode */
if (!op->kt_lastmsg.tv64)
goto rx_changed_settime;
const struct can_frame *rxdata)
{
/*
- * no one uses the MSBs of can_dlc for comparation,
+ * no one uses the MSBs of can_dlc for comparison,
* so we use it here to detect the first time of reception
*/
}
/*
- * bcm_rx_starttimer - enable timeout monitoring for CAN frame receiption
+ * bcm_rx_starttimer - enable timeout monitoring for CAN frame reception
*/
static void bcm_rx_starttimer(struct bcm_op *op)
{
}
/*
- * bcm_rx_timeout_handler - when the (cyclic) CAN frame receiption timed out
+ * bcm_rx_timeout_handler - when the (cyclic) CAN frame reception timed out
*/
static enum hrtimer_restart bcm_rx_timeout_handler(struct hrtimer *hrtimer)
{
}
/*
- * bcm_rx_handler - handle a CAN frame receiption
+ * bcm_rx_handler - handle a CAN frame reception
*/
static void bcm_rx_handler(struct sk_buff *skb, void *data)
{
* The Controller Area Network controllers only accept CAN frames with
* correct CRCs - which are not visible in the controller registers.
* According to skbuff.h documentation the csum_start element for IP
- * checksums is undefined/unsued when ip_summed == CHECKSUM_UNNECESSARY.
+ * checksums is undefined/unused when ip_summed == CHECKSUM_UNNECESSARY.
* Only CAN skbs can be processed here which already have this property.
*/