net: bcmgenet: reapply manual settings to the PHY

The phy_init_hw() function may reset the PHY to a configuration
that does not match manual network settings stored in the phydev
structure. If the phy state machine is polled rather than event
driven this can create a timing hazard where the phy state machine
might alter the settings stored in the phydev structure from the
value read from the BMCR.

This commit follows invocations of phy_init_hw() by the bcmgenet
driver with invocations of the genphy_config_aneg() function to
ensure that the BMCR is written to match the settings held in the
phydev structure. This prevents the risk of manual settings being
accidentally altered.

Fixes: 1c1008c793fa ("net: bcmgenet: add main driver file")
Signed-off-by: Doug Berger <opendmb@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

diff --git a/drivers/net/ethernet/broadcom/genet/bcmgenet.c b/drivers/net/ethernet/broadcom/genet/bcmgenet.c
index b5255dd082657e821ab4657a612f8d1ba9068c53..1de51811fcb4ac443adaa9fb7ab02ad873fbaf7b 100644 (file)
--- a/drivers/net/ethernet/broadcom/genet/bcmgenet.c
+++ b/drivers/net/ethernet/broadcom/genet/bcmgenet.c
@@ -2612,8 +2612,10 @@ static void bcmgenet_irq_task(struct work_struct *work)
        spin_unlock_irq(&priv->lock);
 
        if (status & UMAC_IRQ_PHY_DET_R &&
-           priv->dev->phydev->autoneg != AUTONEG_ENABLE)
+           priv->dev->phydev->autoneg != AUTONEG_ENABLE) {
                phy_init_hw(priv->dev->phydev);
+               genphy_config_aneg(priv->dev->phydev);
+       }
 
        /* Link UP/DOWN event */
        if (status & UMAC_IRQ_LINK_EVENT)
@@ -3634,6 +3636,7 @@ static int bcmgenet_resume(struct device *d)
        phy_init_hw(dev->phydev);
 
        /* Speed settings must be restored */
+       genphy_config_aneg(dev->phydev);
        bcmgenet_mii_config(priv->dev, false);
 
        bcmgenet_set_hw_addr(priv, dev->dev_addr);