clk: mediatek: make dpi0_sel propagate rate changes
authorPhilipp Zabel <p.zabel@pengutronix.de>
Mon, 4 Jan 2016 17:36:42 +0000 (18:36 +0100)
committerPhilipp Zabel <p.zabel@pengutronix.de>
Fri, 6 May 2016 15:47:39 +0000 (17:47 +0200)
This mux is supposed to select a fitting divider after the PLL
is already set to the correct rate.

Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Acked-by: James Liao <jamesjj.liao@mediatek.com>
Acked-by: Stephen Boyd <sboyd@codeaurora.org>
drivers/clk/mediatek/clk-mt8173.c
drivers/clk/mediatek/clk-mtk.h

index 227e356..85c0bfc 100644 (file)
@@ -558,7 +558,11 @@ static const struct mtk_composite top_muxes[] __initconst = {
        MUX_GATE(CLK_TOP_ATB_SEL, "atb_sel", atb_parents, 0x0090, 16, 2, 23),
        MUX_GATE(CLK_TOP_VENC_LT_SEL, "venclt_sel", venc_lt_parents, 0x0090, 24, 4, 31),
        /* CLK_CFG_6 */
-       MUX_GATE(CLK_TOP_DPI0_SEL, "dpi0_sel", dpi0_parents, 0x00a0, 0, 3, 7),
+       /*
+        * The dpi0_sel clock should not propagate rate changes to its parent
+        * clock so the dpi driver can have full control over PLL and divider.
+        */
+       MUX_GATE_FLAGS(CLK_TOP_DPI0_SEL, "dpi0_sel", dpi0_parents, 0x00a0, 0, 3, 7, 0),
        MUX_GATE(CLK_TOP_IRDA_SEL, "irda_sel", irda_parents, 0x00a0, 8, 2, 15),
        MUX_GATE(CLK_TOP_CCI400_SEL, "cci400_sel", cci400_parents, 0x00a0, 16, 3, 23),
        MUX_GATE(CLK_TOP_AUD_1_SEL, "aud_1_sel", aud_1_parents, 0x00a0, 24, 2, 31),
index 32d2e45..9f24fcf 100644 (file)
@@ -83,7 +83,11 @@ struct mtk_composite {
        signed char num_parents;
 };
 
-#define MUX_GATE(_id, _name, _parents, _reg, _shift, _width, _gate) {  \
+/*
+ * In case the rate change propagation to parent clocks is undesirable,
+ * this macro allows to specify the clock flags manually.
+ */
+#define MUX_GATE_FLAGS(_id, _name, _parents, _reg, _shift, _width, _gate, _flags) {    \
                .id = _id,                                              \
                .name = _name,                                          \
                .mux_reg = _reg,                                        \
@@ -94,9 +98,16 @@ struct mtk_composite {
                .divider_shift = -1,                                    \
                .parent_names = _parents,                               \
                .num_parents = ARRAY_SIZE(_parents),                    \
-               .flags = CLK_SET_RATE_PARENT,                           \
+               .flags = _flags,                                        \
        }
 
+/*
+ * Unless necessary, all MUX_GATE clocks propagate rate changes to their
+ * parent clock by default.
+ */
+#define MUX_GATE(_id, _name, _parents, _reg, _shift, _width, _gate)    \
+       MUX_GATE_FLAGS(_id, _name, _parents, _reg, _shift, _width, _gate, CLK_SET_RATE_PARENT)
+
 #define MUX(_id, _name, _parents, _reg, _shift, _width) {              \
                .id = _id,                                              \
                .name = _name,                                          \