#include <linux/of_device.h>
#include <linux/phy/phy.h>
#include <linux/regmap.h>
+#include <linux/reset.h>
#include <linux/of.h>
#include <linux/firmware/xlnx-zynqmp.h>
return 0;
}
+static int sdhci_zynqmp_set_dynamic_config(struct device *dev,
+ struct sdhci_arasan_data *sdhci_arasan)
+{
+ struct sdhci_host *host = sdhci_arasan->host;
+ struct clk_hw *hw = &sdhci_arasan->clk_data.sdcardclk_hw;
+ struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+ const char *clk_name = clk_hw_get_name(hw);
+ u32 mhz, node_id = !strcmp(clk_name, "clk_out_sd0") ? NODE_SD_0 : NODE_SD_1;
+ struct reset_control *rstc;
+ int ret;
+
+ /* Obtain SDHC reset control */
+ rstc = devm_reset_control_get_optional_exclusive(dev, NULL);
+ if (IS_ERR(rstc)) {
+ dev_err(dev, "Cannot get SDHC reset.\n");
+ return PTR_ERR(rstc);
+ }
+
+ ret = reset_control_assert(rstc);
+ if (ret)
+ return ret;
+
+ ret = zynqmp_pm_set_sd_config(node_id, SD_CONFIG_FIXED, 0);
+ if (ret)
+ return ret;
+
+ ret = zynqmp_pm_set_sd_config(node_id, SD_CONFIG_EMMC_SEL,
+ !!(host->mmc->caps & MMC_CAP_NONREMOVABLE));
+ if (ret)
+ return ret;
+
+ mhz = DIV_ROUND_CLOSEST_ULL(clk_get_rate(pltfm_host->clk), 1000000);
+ if (mhz > 100 && mhz <= 200)
+ mhz = 200;
+ else if (mhz > 50 && mhz <= 100)
+ mhz = 100;
+ else if (mhz > 25 && mhz <= 50)
+ mhz = 50;
+ else
+ mhz = 25;
+
+ ret = zynqmp_pm_set_sd_config(node_id, SD_CONFIG_BASECLK, mhz);
+ if (ret)
+ return ret;
+
+ ret = zynqmp_pm_set_sd_config(node_id, SD_CONFIG_8BIT,
+ !!(host->mmc->caps & MMC_CAP_8_BIT_DATA));
+ if (ret)
+ return ret;
+
+ ret = reset_control_deassert(rstc);
+ if (ret)
+ return ret;
+
+ usleep_range(1000, 1500);
+
+ return 0;
+}
+
static int sdhci_arasan_add_host(struct sdhci_arasan_data *sdhci_arasan)
{
struct sdhci_host *host = sdhci_arasan->host;
goto unreg_clk;
}
+ if (of_device_is_compatible(np, "xlnx,zynqmp-8.9a")) {
+ ret = zynqmp_pm_is_function_supported(PM_IOCTL, IOCTL_SET_SD_CONFIG);
+ if (!ret) {
+ ret = sdhci_zynqmp_set_dynamic_config(dev, sdhci_arasan);
+ if (ret)
+ goto unreg_clk;
+ }
+ }
+
sdhci_arasan->phy = ERR_PTR(-ENODEV);
if (of_device_is_compatible(np, "arasan,sdhci-5.1")) {
sdhci_arasan->phy = devm_phy_get(dev, "phy_arasan");