riscv: dts: Split Microchip device tree
authorPadmarao Begari <padmarao.begari@microchip.com>
Wed, 17 Nov 2021 12:51:17 +0000 (18:21 +0530)
committerLeo Yu-Chi Liang <ycliang@andestech.com>
Thu, 2 Dec 2021 08:43:51 +0000 (16:43 +0800)
The device tree split into .dtsi and .dts files, common
device node for eMMC/SD, enable I2C1, UART1 for console
instead of UART0, enable the DDR 2GB memory and in
that 288MB memory is reserved for fabric buffer.

Signed-off-by: Padmarao Begari <padmarao.begari@microchip.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
arch/riscv/dts/microchip-mpfs-icicle-kit.dts
arch/riscv/dts/microchip-mpfs.dtsi [new file with mode: 0644]
include/dt-bindings/interrupt-controller/microchip-mpfs-plic.h [new file with mode: 0644]
include/dt-bindings/interrupt-controller/riscv-hart.h [new file with mode: 0644]

index 89c4cf5fb2b0f89d6eafd3e1b18dd505b861e679..287ef3d23b7385e073cafbe95784206d39077411 100644 (file)
-// SPDX-License-Identifier: (GPL-2.0 OR MIT)
-/* Copyright (c) 2020 Microchip Technology Inc */
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2021 Microchip Technology Inc.
+ * Padmarao Begari <padmarao.begari@microchip.com>
+ */
 
 /dts-v1/;
-#include "dt-bindings/clock/microchip-mpfs-clock.h"
+
+#include "microchip-mpfs.dtsi"
 
 /* Clock frequency (in Hz) of the rtcclk */
 #define RTCCLK_FREQ            1000000
 
 / {
-       #address-cells = <2>;
-       #size-cells = <2>;
-       model = "Microchip MPFS Icicle Kit";
-       compatible = "microchip,mpfs-icicle-kit";
+       model = "Microchip PolarFire-SoC Icicle Kit";
+       compatible = "microchip,mpfs-icicle-kit", "microchip,mpfs";
 
        aliases {
-               serial0 = &uart0;
-               ethernet0 = &emac1;
+               serial1 = &uart1;
+               ethernet0 = &mac1;
        };
 
        chosen {
-               stdout-path = "serial0";
+               stdout-path = "serial1";
        };
 
-       cpucomplex: cpus {
-               #address-cells = <1>;
-               #size-cells = <0>;
+       cpus {
                timebase-frequency = <RTCCLK_FREQ>;
-               cpu0: cpu@0 {
-                       clocks = <&clkcfg CLK_CPU>;
-                       compatible = "sifive,e51", "sifive,rocket0", "riscv";
-                       device_type = "cpu";
-                       i-cache-block-size = <64>;
-                       i-cache-sets = <128>;
-                       i-cache-size = <16384>;
-                       reg = <0>;
-                       riscv,isa = "rv64imac";
-                       status = "disabled";
-                       operating-points = <
-                               /* kHz  uV */
-                               600000  1100000
-                               300000   950000
-                               150000   750000
-                       >;
-                       cpu0intc: interrupt-controller {
-                               #interrupt-cells = <1>;
-                               compatible = "riscv,cpu-intc";
-                               interrupt-controller;
-                       };
-               };
-               cpu1: cpu@1 {
-                       clocks = <&clkcfg CLK_CPU>;
-                       compatible = "sifive,u54-mc", "sifive,rocket0", "riscv";
-                       d-cache-block-size = <64>;
-                       d-cache-sets = <64>;
-                       d-cache-size = <32768>;
-                       d-tlb-sets = <1>;
-                       d-tlb-size = <32>;
-                       device_type = "cpu";
-                       i-cache-block-size = <64>;
-                       i-cache-sets = <64>;
-                       i-cache-size = <32768>;
-                       i-tlb-sets = <1>;
-                       i-tlb-size = <32>;
-                       mmu-type = "riscv,sv39";
-                       reg = <1>;
-                       riscv,isa = "rv64imafdc";
-                       tlb-split;
-                       status = "okay";
-                       operating-points = <
-                               /* kHz  uV */
-                               600000  1100000
-                               300000   950000
-                               150000   750000
-                       >;
-                       cpu1intc: interrupt-controller {
-                               #interrupt-cells = <1>;
-                               compatible = "riscv,cpu-intc";
-                               interrupt-controller;
-                       };
-               };
-               cpu2: cpu@2 {
-                       clocks = <&clkcfg CLK_CPU>;
-                       compatible = "sifive,u54-mc", "sifive,rocket0", "riscv";
-                       d-cache-block-size = <64>;
-                       d-cache-sets = <64>;
-                       d-cache-size = <32768>;
-                       d-tlb-sets = <1>;
-                       d-tlb-size = <32>;
-                       device_type = "cpu";
-                       i-cache-block-size = <64>;
-                       i-cache-sets = <64>;
-                       i-cache-size = <32768>;
-                       i-tlb-sets = <1>;
-                       i-tlb-size = <32>;
-                       mmu-type = "riscv,sv39";
-                       reg = <2>;
-                       riscv,isa = "rv64imafdc";
-                       tlb-split;
-                       status = "okay";
-                       operating-points = <
-                               /* kHz  uV */
-                               600000  1100000
-                               300000   950000
-                               150000   750000
-                       >;
-                       cpu2intc: interrupt-controller {
-                               #interrupt-cells = <1>;
-                               compatible = "riscv,cpu-intc";
-                               interrupt-controller;
-                       };
+       };
+
+       reserved-memory {
+               ranges;
+               #size-cells = <2>;
+               #address-cells = <2>;
+
+               fabricbuf0: fabricbuf@0 {
+                       compatible = "shared-dma-pool";
+                       reg = <0x0 0xae000000 0x0 0x2000000>;
+                       label = "fabricbuf0-ddr-c";
                };
-               cpu3: cpu@3 {
-                       clocks = <&clkcfg CLK_CPU>;
-                       compatible = "sifive,u54-mc", "sifive,rocket0", "riscv";
-                       d-cache-block-size = <64>;
-                       d-cache-sets = <64>;
-                       d-cache-size = <32768>;
-                       d-tlb-sets = <1>;
-                       d-tlb-size = <32>;
-                       device_type = "cpu";
-                       i-cache-block-size = <64>;
-                       i-cache-sets = <64>;
-                       i-cache-size = <32768>;
-                       i-tlb-sets = <1>;
-                       i-tlb-size = <32>;
-                       mmu-type = "riscv,sv39";
-                       reg = <3>;
-                       riscv,isa = "rv64imafdc";
-                       tlb-split;
-                       status = "okay";
-                       operating-points = <
-                               /* kHz  uV */
-                               600000  1100000
-                               300000   950000
-                               150000   750000
-                       >;
-                       cpu3intc: interrupt-controller {
-                               #interrupt-cells = <1>;
-                               compatible = "riscv,cpu-intc";
-                               interrupt-controller;
-                       };
+
+               fabricbuf1: fabricbuf@1 {
+                       compatible = "shared-dma-pool";
+                       reg = <0x0 0xc0000000 0x0 0x8000000>;
+                       label = "fabricbuf1-ddr-nc";
                };
-               cpu4: cpu@4 {
-                       clocks = <&clkcfg CLK_CPU>;
-                       compatible = "sifive,u54-mc", "sifive,rocket0", "riscv";
-                       d-cache-block-size = <64>;
-                       d-cache-sets = <64>;
-                       d-cache-size = <32768>;
-                       d-tlb-sets = <1>;
-                       d-tlb-size = <32>;
-                       device_type = "cpu";
-                       i-cache-block-size = <64>;
-                       i-cache-sets = <64>;
-                       i-cache-size = <32768>;
-                       i-tlb-sets = <1>;
-                       i-tlb-size = <32>;
-                       mmu-type = "riscv,sv39";
-                       reg = <4>;
-                       riscv,isa = "rv64imafdc";
-                       tlb-split;
-                       status = "okay";
-                       operating-points = <
-                               /* kHz  uV */
-                               600000  1100000
-                               300000   950000
-                               150000   750000
-                       >;
-                       cpu4intc: interrupt-controller {
-                               #interrupt-cells = <1>;
-                               compatible = "riscv,cpu-intc";
-                               interrupt-controller;
-                       };
+
+               fabricbuf2: fabricbuf@2 {
+                       compatible = "shared-dma-pool";
+                       reg = <0x0 0xd8000000 0x0 0x8000000>;
+                       label = "fabricbuf2-ddr-nc-wcb";
                };
        };
-       refclk: refclk {
-               compatible = "fixed-clock";
-               #clock-cells = <0>;
-               clock-frequency = <600000000>;
-               clock-output-names = "msspllclk";
+
+       udmabuf0 {
+               compatible = "ikwzm,u-dma-buf";
+               device-name = "udmabuf-ddr-c0";
+               minor-number = <0>;
+               size = <0x0 0x2000000>;
+               memory-region = <&fabricbuf0>;
+               sync-mode = <3>;
+       };
+
+       udmabuf1 {
+               compatible = "ikwzm,u-dma-buf";
+               device-name = "udmabuf-ddr-nc0";
+               minor-number = <1>;
+               size = <0x0 0x8000000>;
+               memory-region = <&fabricbuf1>;
+               sync-mode = <3>;
+       };
+
+       udmabuf2 {
+               compatible = "ikwzm,u-dma-buf";
+               device-name = "udmabuf-ddr-nc-wcb0";
+               minor-number = <2>;
+               size = <0x0 0x8000000>;
+               memory-region = <&fabricbuf2>;
+               sync-mode = <3>;
        };
-       ddr: memory@80000000 {
+
+       ddrc_cache_lo: memory@80000000 {
                device_type = "memory";
-               reg = <0x0 0x80000000 0x0 0x40000000>;
+               reg = <0x0 0x80000000 0x0 0x2e000000>;
                clocks = <&clkcfg CLK_DDRC>;
+               status = "okay";
        };
-       soc: soc {
-               #address-cells = <2>;
-               #size-cells = <2>;
-               compatible = "microchip,mpfs-icicle-kit", "simple-bus";
-               ranges;
-               clint0: clint@2000000 {
-                       compatible = "riscv,clint0";
-                       interrupts-extended = <&cpu0intc 3 &cpu0intc 7
-                                               &cpu1intc 3 &cpu1intc 7
-                                               &cpu2intc 3 &cpu2intc 7
-                                               &cpu3intc 3 &cpu3intc 7
-                                               &cpu4intc 3 &cpu4intc 7>;
-                       reg = <0x0 0x2000000 0x0 0x10000>;
-                       reg-names = "control";
-                       clock-frequency = <RTCCLK_FREQ>;
-               };
-               cachecontroller: cache-controller@2010000 {
-                       compatible = "sifive,fu540-c000-ccache", "cache";
-                       cache-block-size = <64>;
-                       cache-level = <2>;
-                       cache-sets = <1024>;
-                       cache-size = <2097152>;
-                       cache-unified;
-                       interrupt-parent = <&plic>;
-                       interrupts = <1 2 3>;
-                       reg = <0x0 0x2010000 0x0 0x1000>;
-               };
-               plic: interrupt-controller@c000000 {
-                       #interrupt-cells = <1>;
-                       compatible = "sifive,plic-1.0.0";
-                       reg = <0x0 0xc000000 0x0 0x4000000>;
-                       riscv,max-priority = <7>;
-                       riscv,ndev = <186>;
-                       interrupt-controller;
-                       interrupts-extended = <
-                               &cpu0intc 11
-                               &cpu1intc 11 &cpu1intc 9
-                               &cpu2intc 11 &cpu2intc 9
-                               &cpu3intc 11 &cpu3intc 9
-                               &cpu4intc 11 &cpu4intc 9>;
-               };
-               uart0: serial@20000000 {
-                       compatible = "ns16550a";
-                       reg = <0x0 0x20000000 0x0 0x400>;
-                       reg-io-width = <4>;
-                       reg-shift = <2>;
-                       interrupt-parent = <&plic>;
-                       interrupts = <90>;
-                       clocks = <&clkcfg CLK_MMUART0>;
-                       status = "okay";
-               };
-               clkcfg: clkcfg@20002000 {
-                       compatible = "microchip,mpfs-clkcfg";
-                       reg = <0x0 0x20002000 0x0 0x1000>;
-                       reg-names = "mss_sysreg";
-                       clocks = <&refclk>;
-                       #clock-cells = <1>;
-                       clock-output-names = "cpu", "axi", "ahb", "envm",
-                                       "mac0", "mac1", "mmc", "timer",
-                                       "mmuart0", "mmuart1", "mmuart2",
-                                       "mmuart3", "mmuart4", "spi0", "spi1",
-                                       "i2c0", "i2c1", "can0", "can1", "usb",
-                                       "reserved", "rtc", "qspi", "gpio0",
-                                       "gpio1", "gpio2", "ddrc", "fic0",
-                                       "fic1", "fic2", "fic3", "athena",
-                                       "cfm";
-               };
-               emmc: mmc@20008000 {
-                       compatible = "cdns,sd4hc";
-                       reg = <0x0 0x20008000 0x0 0x1000>;
-                       interrupt-parent = <&plic>;
-                       interrupts = <88 89>;
-                       pinctrl-names = "default";
-                       clocks = <&clkcfg CLK_MMC>;
-                       bus-width = <4>;
-                       cap-mmc-highspeed;
-                       mmc-ddr-3_3v;
-                       max-frequency = <200000000>;
-                       non-removable;
-                       no-sd;
-                       no-sdio;
-                       voltage-ranges = <3300 3300>;
-                       status = "okay";
-               };
-               sdcard: sd@20008000 {
-                       compatible = "cdns,sd4hc";
-                       reg = <0x0 0x20008000 0x0 0x1000>;
-                       interrupt-parent = <&plic>;
-                       interrupts = <88>;
-                       pinctrl-names = "default";
-                       clocks = <&clkcfg CLK_MMC>;
-                       bus-width = <4>;
-                       disable-wp;
-                       cap-sd-highspeed;
-                       card-detect-delay = <200>;
-                       sd-uhs-sdr12;
-                       sd-uhs-sdr25;
-                       sd-uhs-sdr50;
-                       sd-uhs-sdr104;
-                       max-frequency = <200000000>;
-                       status = "disabled";
-               };
-               uart1: serial@20100000 {
-                       compatible = "ns16550a";
-                       reg = <0x0 0x20100000 0x0 0x400>;
-                       reg-io-width = <4>;
-                       reg-shift = <2>;
-                       interrupt-parent = <&plic>;
-                       interrupts = <91>;
-                       clocks = <&clkcfg CLK_MMUART1>;
-                       status = "okay";
-               };
-               uart2: serial@20102000 {
-                       compatible = "ns16550a";
-                       reg = <0x0 0x20102000 0x0 0x400>;
-                       reg-io-width = <4>;
-                       reg-shift = <2>;
-                       interrupt-parent = <&plic>;
-                       interrupts = <92>;
-                       clocks = <&clkcfg CLK_MMUART2>;
-                       status = "okay";
-               };
-               uart3: serial@20104000 {
-                       compatible = "ns16550a";
-                       reg = <0x0 0x20104000 0x0 0x400>;
-                       reg-io-width = <4>;
-                       reg-shift = <2>;
-                       interrupt-parent = <&plic>;
-                       interrupts = <93>;
-                       clocks = <&clkcfg CLK_MMUART3>;
-                       status = "okay";
-               };
-               i2c0: i2c@2010a000 {
-                       #address-cells = <1>;
-                       #size-cells = <0>;
-                       compatible = "microchip,mpfs-mss-i2c";
-                       reg = <0x0 0x2010a000 0x0 0x1000>;
-                       interrupt-parent = <&plic>;
-                       interrupts = <58>;
-                       clocks = <&clkcfg CLK_I2C0>;
-                       status = "disabled";
-               };
-               i2c1: i2c@2010b000 {
-                       #address-cells = <1>;
-                       #size-cells = <0>;
-                       compatible = "microchip,mpfs-mss-i2c";
-                       reg = <0x0 0x2010b000 0x0 0x1000>;
-                       interrupt-parent = <&plic>;
-                       interrupts = <61>;
-                       clocks = <&clkcfg CLK_I2C1>;
-                       status = "disabled";
-                       pac193x@10 {
-                               compatible = "microchip,pac1934";
-                               reg = <0x10>;
-                               samp-rate = <64>;
-                               status = "disabled";
-                               ch1: channel0 {
-                                       uohms-shunt-res = <10000>;
-                                       rail-name = "VDD";
-                                       channel_enabled;
-                               };
-                               ch2: channel1 {
-                                       uohms-shunt-res = <10000>;
-                                       rail-name = "VDDA25";
-                                       channel_enabled;
-                               };
-                               ch3: channel2 {
-                                       uohms-shunt-res = <10000>;
-                                       rail-name = "VDD25";
-                                       channel_enabled;
-                               };
-                               ch4: channel3 {
-                                       uohms-shunt-res = <10000>;
-                                       rail-name = "VDDA";
-                                       channel_enabled;
-                               };
-                       };
-               };
-               emac0: ethernet@20110000 {
-                       compatible = "microchip,mpfs-mss-gem";
-                       reg = <0x0 0x20110000 0x0 0x2000>;
-                       interrupt-parent = <&plic>;
-                       interrupts = <64 65 66 67>;
-                       local-mac-address = [56 34 00 FC 00 02];
-                       phy-mode = "sgmii";
-                       clocks = <&clkcfg CLK_MAC0>, <&clkcfg CLK_AXI>;
-                       clock-names = "pclk", "hclk";
-                       status = "disabled";
 
-                       #address-cells = <1>;
-                       #size-cells = <0>;
-                       phy-handle = <&phy0>;
-                       phy0: ethernet-phy@8 {
-                               reg = <8>;
-                               ti,fifo-depth = <0x01>;
-                       };
-               };
-               emac1: ethernet@20112000 {
-                       compatible = "microchip,mpfs-mss-gem";
-                       reg = <0x0 0x20112000 0x0 0x2000>;
-                       interrupt-parent = <&plic>;
-                       interrupts = <70 71 72 73>;
-                       local-mac-address = [00 00 00 00 00 00];
-                       phy-mode = "sgmii";
-                       clocks = <&clkcfg CLK_MAC1>, <&clkcfg CLK_AHB>;
-                       clock-names = "pclk", "hclk";
-                       status = "okay";
+       ddrc_cache_hi: memory@1000000000 {
+               device_type = "memory";
+               reg = <0x10 0x0 0x0 0x40000000>;
+               clocks = <&clkcfg CLK_DDRC>;
+               status = "okay";
+       };
+};
 
-                       #address-cells = <1>;
-                       #size-cells = <0>;
-                       phy-handle = <&phy1>;
-                       phy1: ethernet-phy@9 {
-                               reg = <9>;
-                               ti,fifo-depth = <0x01>;
-                       };
-               };
-               gpio: gpio@20122000 {
-                       compatible = "microchip,mpfs-mss-gpio";
-                       interrupt-parent = <&plic>;
-                       interrupts = <13 14 15 16 17 18 19 20 21 22 23 24 25 26
-                                       27 28 29 30 31 32 33 34 35 36 37 38 39
-                                       40 41 42 43 44>;
-                       gpio-controller;
-                       clocks = <&clkcfg CLK_GPIO2>;
-                       reg = <0x00 0x20122000 0x0 0x1000>;
-                       reg-names = "control";
-                       #gpio-cells = <2>;
-                       status = "disabled";
+&uart1 {
+       status = "okay";
+};
+
+&mmc {
+       status = "okay";
+
+       bus-width = <4>;
+       disable-wp;
+       cap-mmc-highspeed;
+       cap-sd-highspeed;
+       card-detect-delay = <200>;
+       mmc-ddr-1_8v;
+       mmc-hs200-1_8v;
+       sd-uhs-sdr12;
+       sd-uhs-sdr25;
+       sd-uhs-sdr50;
+       sd-uhs-sdr104;
+};
+
+&i2c1 {
+       status = "okay";
+       clock-frequency = <100000>;
+
+       pac193x: pac193x@10 {
+               compatible = "microchip,pac1934";
+               reg = <0x10>;
+               samp-rate = <64>;
+               status = "okay";
+               ch1: channel0 {
+                       uohms-shunt-res = <10000>;
+                       rail-name = "VDDREG";
+                       channel_enabled;
+               };
+               ch2: channel1 {
+                       uohms-shunt-res = <10000>;
+                       rail-name = "VDDA25";
+                       channel_enabled;
+               };
+               ch3: channel2 {
+                       uohms-shunt-res = <10000>;
+                       rail-name = "VDD25";
+                       channel_enabled;
+               };
+               ch4: channel3 {
+                       uohms-shunt-res = <10000>;
+                       rail-name = "VDDA_REG";
+                       channel_enabled;
                };
        };
 };
+
+&mac1 {
+       status = "okay";
+       phy-mode = "sgmii";
+       phy-handle = <&phy1>;
+       phy1: ethernet-phy@9 {
+               reg = <9>;
+               ti,fifo-depth = <0x1>;
+       };
+};
diff --git a/arch/riscv/dts/microchip-mpfs.dtsi b/arch/riscv/dts/microchip-mpfs.dtsi
new file mode 100644 (file)
index 0000000..4f449a3
--- /dev/null
@@ -0,0 +1,571 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/* Copyright (c) 2020-2021 Microchip Technology Inc */
+
+#include "dt-bindings/clock/microchip-mpfs-clock.h"
+#include "dt-bindings/interrupt-controller/microchip-mpfs-plic.h"
+#include "dt-bindings/interrupt-controller/riscv-hart.h"
+
+/ {
+       #address-cells = <2>;
+       #size-cells = <2>;
+       model = "Microchip PolarFire SoC";
+       compatible = "microchip,mpfs";
+
+       chosen {
+       };
+
+       cpus {
+               #address-cells = <1>;
+               #size-cells = <0>;
+
+               cpu0: cpu@0 {
+                       compatible = "sifive,e51", "sifive,rocket0", "riscv";
+                       device_type = "cpu";
+                       i-cache-block-size = <64>;
+                       i-cache-sets = <128>;
+                       i-cache-size = <16384>;
+                       reg = <0>;
+                       riscv,isa = "rv64imac";
+                       clocks = <&clkcfg CLK_CPU>;
+                       status = "disabled";
+                       operating-points = <
+                               /* kHz  uV */
+                               600000  1100000
+                               300000   950000
+                               150000   750000
+                       >;
+                       cpu0_intc: interrupt-controller {
+                               #interrupt-cells = <1>;
+                               compatible = "riscv,cpu-intc";
+                               interrupt-controller;
+                       };
+               };
+
+               cpu1: cpu@1 {
+                       compatible = "sifive,u54-mc", "sifive,rocket0", "riscv";
+                       d-cache-block-size = <64>;
+                       d-cache-sets = <64>;
+                       d-cache-size = <32768>;
+                       d-tlb-sets = <1>;
+                       d-tlb-size = <32>;
+                       device_type = "cpu";
+                       i-cache-block-size = <64>;
+                       i-cache-sets = <64>;
+                       i-cache-size = <32768>;
+                       i-tlb-sets = <1>;
+                       i-tlb-size = <32>;
+                       mmu-type = "riscv,sv39";
+                       reg = <1>;
+                       riscv,isa = "rv64imafdc";
+                       clocks = <&clkcfg CLK_CPU>;
+                       tlb-split;
+                       status = "okay";
+                       operating-points = <
+                               /* kHz  uV */
+                               600000  1100000
+                               300000   950000
+                               150000   750000
+                       >;
+                       cpu1_intc: interrupt-controller {
+                               #interrupt-cells = <1>;
+                               compatible = "riscv,cpu-intc";
+                               interrupt-controller;
+                       };
+               };
+
+               cpu2: cpu@2 {
+                       compatible = "sifive,u54-mc", "sifive,rocket0", "riscv";
+                       d-cache-block-size = <64>;
+                       d-cache-sets = <64>;
+                       d-cache-size = <32768>;
+                       d-tlb-sets = <1>;
+                       d-tlb-size = <32>;
+                       device_type = "cpu";
+                       i-cache-block-size = <64>;
+                       i-cache-sets = <64>;
+                       i-cache-size = <32768>;
+                       i-tlb-sets = <1>;
+                       i-tlb-size = <32>;
+                       mmu-type = "riscv,sv39";
+                       reg = <2>;
+                       riscv,isa = "rv64imafdc";
+                       clocks = <&clkcfg CLK_CPU>;
+                       tlb-split;
+                       status = "okay";
+                       operating-points = <
+                               /* kHz  uV */
+                               600000  1100000
+                               300000   950000
+                               150000   750000
+                       >;
+                       cpu2_intc: interrupt-controller {
+                               #interrupt-cells = <1>;
+                               compatible = "riscv,cpu-intc";
+                               interrupt-controller;
+                       };
+               };
+
+               cpu3: cpu@3 {
+                       compatible = "sifive,u54-mc", "sifive,rocket0", "riscv";
+                       d-cache-block-size = <64>;
+                       d-cache-sets = <64>;
+                       d-cache-size = <32768>;
+                       d-tlb-sets = <1>;
+                       d-tlb-size = <32>;
+                       device_type = "cpu";
+                       i-cache-block-size = <64>;
+                       i-cache-sets = <64>;
+                       i-cache-size = <32768>;
+                       i-tlb-sets = <1>;
+                       i-tlb-size = <32>;
+                       mmu-type = "riscv,sv39";
+                       reg = <3>;
+                       riscv,isa = "rv64imafdc";
+                       clocks = <&clkcfg CLK_CPU>;
+                       tlb-split;
+                       status = "okay";
+                       operating-points = <
+                               /* kHz  uV */
+                               600000  1100000
+                               300000   950000
+                               150000   750000
+                       >;
+                       cpu3_intc: interrupt-controller {
+                               #interrupt-cells = <1>;
+                               compatible = "riscv,cpu-intc";
+                               interrupt-controller;
+                       };
+               };
+
+               cpu4: cpu@4 {
+                       compatible = "sifive,u54-mc", "sifive,rocket0", "riscv";
+                       d-cache-block-size = <64>;
+                       d-cache-sets = <64>;
+                       d-cache-size = <32768>;
+                       d-tlb-sets = <1>;
+                       d-tlb-size = <32>;
+                       device_type = "cpu";
+                       i-cache-block-size = <64>;
+                       i-cache-sets = <64>;
+                       i-cache-size = <32768>;
+                       i-tlb-sets = <1>;
+                       i-tlb-size = <32>;
+                       mmu-type = "riscv,sv39";
+                       reg = <4>;
+                       riscv,isa = "rv64imafdc";
+                       clocks = <&clkcfg CLK_CPU>;
+                       tlb-split;
+                       status = "okay";
+                       operating-points = <
+                               /* kHz  uV */
+                               600000  1100000
+                               300000   950000
+                               150000   750000
+                       >;
+                       cpu4_intc: interrupt-controller {
+                               #interrupt-cells = <1>;
+                               compatible = "riscv,cpu-intc";
+                               interrupt-controller;
+                       };
+               };
+       };
+
+       soc {
+               #address-cells = <2>;
+               #size-cells = <2>;
+               compatible = "microchip,mpfs-soc", "simple-bus";
+               ranges;
+
+               clint: clint@2000000 {
+                       compatible = "sifive,clint0";
+                       reg = <0x0 0x2000000 0x0 0xC000>;
+                       interrupts-extended =
+                                       <&cpu0_intc HART_INT_M_SOFT &cpu0_intc HART_INT_M_TIMER
+                                        &cpu1_intc HART_INT_M_SOFT &cpu1_intc HART_INT_M_TIMER
+                                        &cpu2_intc HART_INT_M_SOFT &cpu2_intc HART_INT_M_TIMER
+                                        &cpu3_intc HART_INT_M_SOFT &cpu3_intc HART_INT_M_TIMER
+                                        &cpu4_intc HART_INT_M_SOFT &cpu4_intc HART_INT_M_TIMER>;
+               };
+
+               cachecontroller: cache-controller@2010000 {
+                       compatible = "sifive,fu540-c000-ccache", "cache";
+                       reg = <0x0 0x2010000 0x0 0x1000>;
+                       interrupt-parent = <&plic>;
+                       interrupts = <PLIC_INT_L2_METADATA_CORR
+                               PLIC_INT_L2_METADATA_UNCORR
+                               PLIC_INT_L2_DATA_CORR>;
+                       cache-block-size = <64>;
+                       cache-level = <2>;
+                       cache-sets = <1024>;
+                       cache-size = <2097152>;
+                       cache-unified;
+               };
+
+               pdma: pdma@3000000 {
+                       compatible = "microchip,mpfs-pdma-uio","sifive,fu540-c000-pdma";
+                       reg = <0x0 0x3000000 0x0 0x8000>;
+                       interrupt-parent = <&plic>;
+                       interrupts = <PLIC_INT_DMA_CH0_DONE PLIC_INT_DMA_CH0_ERR
+                               PLIC_INT_DMA_CH1_DONE PLIC_INT_DMA_CH1_ERR
+                               PLIC_INT_DMA_CH2_DONE PLIC_INT_DMA_CH2_ERR
+                               PLIC_INT_DMA_CH3_DONE PLIC_INT_DMA_CH3_ERR>;
+                       #dma-cells = <1>;
+               };
+
+               plic: interrupt-controller@c000000 {
+                       compatible = "sifive,plic-1.0.0";
+                       reg = <0x0 0xc000000 0x0 0x4000000>;
+                       #interrupt-cells = <1>;
+                       riscv,ndev = <186>;
+                       interrupt-controller;
+                       interrupts-extended = <&cpu0_intc HART_INT_M_EXT
+                                       &cpu1_intc HART_INT_M_EXT &cpu1_intc HART_INT_S_EXT
+                                       &cpu2_intc HART_INT_M_EXT &cpu2_intc HART_INT_S_EXT
+                                       &cpu3_intc HART_INT_M_EXT &cpu3_intc HART_INT_S_EXT
+                                       &cpu4_intc HART_INT_M_EXT &cpu4_intc HART_INT_S_EXT>;
+               };
+
+               refclk: refclk {
+                       compatible = "fixed-clock";
+                       #clock-cells = <0>;
+                       clock-frequency = <600000000>;
+                       clock-output-names = "msspllclk";
+               };
+
+               clkcfg: clkcfg@20002000 {
+                       compatible = "microchip,mpfs-clkcfg";
+                       reg = <0x0 0x20002000 0x0 0x1000>;
+                       reg-names = "mss_sysreg";
+                       clocks = <&refclk>;
+                       #clock-cells = <1>;
+                       clock-output-names = "cpu", "axi", "ahb", "envm",       /* 0-3   */
+                               "mac0", "mac1", "mmc", "timer",                         /* 4-7   */
+                               "mmuart0", "mmuart1", "mmuart2", "mmuart3",     /* 8-11  */
+                               "mmuart4", "spi0", "spi1", "i2c0",                      /* 12-15 */
+                               "i2c1", "can0", "can1", "usb",                          /* 16-19 */
+                               "rsvd", "rtc", "qspi", "gpio0",                         /* 20-23 */
+                               "gpio1", "gpio2", "ddrc", "fic0",                       /* 24-27 */
+                               "fic1", "fic2", "fic3", "athena", "cfm";        /* 28-32 */
+               };
+
+               /* Common node entry for eMMC/SD */
+               mmc: mmc@20008000 {
+                       compatible = "microchip,mpfs-sd4hc","cdns,sd4hc";
+                       reg = <0x0 0x20008000 0x0 0x1000>;
+                       clocks = <&clkcfg CLK_MMC>;
+                       interrupt-parent = <&plic>;
+                       interrupts = <PLIC_INT_MMC_MAIN PLIC_INT_MMC_WAKEUP>;
+                       max-frequency = <200000000>;
+                       status = "disabled";
+               };
+
+               uart0: serial@20000000 {
+                       compatible = "ns16550a";
+                       reg = <0x0 0x20000000 0x0 0x400>;
+                       reg-io-width = <4>;
+                       reg-shift = <2>;
+                       interrupt-parent = <&plic>;
+                       interrupts = <PLIC_INT_MMUART0>;
+                       clocks = <&clkcfg CLK_MMUART0>;
+                       status = "disabled"; /* Reserved for the HSS */
+               };
+
+               uart1: serial@20100000 {
+                       compatible = "ns16550a";
+                       reg = <0x0 0x20100000 0x0 0x400>;
+                       reg-io-width = <4>;
+                       reg-shift = <2>;
+                       interrupt-parent = <&plic>;
+                       interrupts = <PLIC_INT_MMUART1>;
+                       clocks = <&clkcfg CLK_MMUART1>;
+                       status = "disabled";
+               };
+
+               uart2: serial@20102000 {
+                       compatible = "ns16550a";
+                       reg = <0x0 0x20102000 0x0 0x400>;
+                       reg-io-width = <4>;
+                       reg-shift = <2>;
+                       interrupt-parent = <&plic>;
+                       interrupts = <PLIC_INT_MMUART2>;
+                       clocks = <&clkcfg CLK_MMUART2>;
+                       status = "disabled";
+               };
+
+               uart3: serial@20104000 {
+                       compatible = "ns16550a";
+                       reg = <0x0 0x20104000 0x0 0x400>;
+                       reg-io-width = <4>;
+                       reg-shift = <2>;
+                       interrupt-parent = <&plic>;
+                       interrupts = <PLIC_INT_MMUART3>;
+                       clocks = <&clkcfg CLK_MMUART3>;
+                       status = "disabled";
+               };
+
+               uart4: serial@20106000 {
+                       compatible = "ns16550a";
+                       reg = <0x0 0x20106000 0x0 0x400>;
+                       reg-io-width = <4>;
+                       reg-shift = <2>;
+                       interrupt-parent = <&plic>;
+                       interrupts = <PLIC_INT_MMUART4>;
+                       clocks = <&clkcfg CLK_MMUART4>;
+                       status = "disabled";
+               };
+
+               spi0: spi@20108000 {
+                       compatible = "microchip,mpfs-spi";
+                       reg = <0x0 0x20108000 0x0 0x1000>;
+                       clocks = <&clkcfg CLK_SPI0>;
+                       interrupt-parent = <&plic>;
+                       interrupts = <PLIC_INT_SPI0>;
+                       num-cs = <8>;
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+                       status = "disabled";
+               };
+
+               spi1: spi@20109000 {
+                       compatible = "microchip,mpfs-spi";
+                       reg = <0x0 0x20109000 0x0 0x1000>;
+                       clocks = <&clkcfg CLK_SPI1>;
+                       interrupt-parent = <&plic>;
+                       interrupts = <PLIC_INT_SPI1>;
+                       num-cs = <8>;
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+                       status = "disabled";
+               };
+
+               i2c0: i2c@2010a000 {
+                       compatible = "microchip,mpfs-i2c";
+                       reg = <0x0 0x2010a000 0x0 0x1000>;
+                       clocks = <&clkcfg CLK_I2C0>;
+                       interrupt-parent = <&plic>;
+                       interrupts = <PLIC_INT_I2C0_MAIN>;
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+                       status = "disabled";
+               };
+
+               i2c1: i2c@2010b000 {
+                       compatible = "microchip,mpfs-i2c";
+                       reg = <0x0 0x2010b000 0x0 0x1000>;
+                       clocks = <&clkcfg CLK_I2C1>;
+                       interrupt-parent = <&plic>;
+                       interrupts = <PLIC_INT_I2C1_MAIN>;
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+                       status = "disabled";
+               };
+
+               can0: can@2010c000 {
+                       compatible = "microchip,mpfs-can-uio";
+                       reg = <0x0 0x2010c000 0x0 0x1000>;
+                       clocks = <&clkcfg CLK_CAN0>;
+                       interrupt-parent = <&plic>;
+                       interrupts = <PLIC_INT_CAN0>;
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+                       status = "disabled";
+               };
+
+               can1: can@2010d000 {
+                       compatible = "microchip,mpfs-can-uio";
+                       reg = <0x0 0x2010d000 0x0 0x1000>;
+                       clocks = <&clkcfg CLK_CAN1>;
+                       interrupt-parent = <&plic>;
+                       interrupts = <PLIC_INT_CAN1>;
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+                       status = "disabled";
+               };
+
+               mac0: ethernet@20110000 {
+                       compatible = "cdns,macb";
+                       reg = <0x0 0x20110000 0x0 0x2000>;
+                       clocks = <&clkcfg CLK_MAC0>, <&clkcfg CLK_AHB>;
+                       clock-names = "pclk", "hclk";
+                       interrupt-parent = <&plic>;
+                       interrupts = <PLIC_INT_MAC0_INT
+                               PLIC_INT_MAC0_QUEUE1
+                               PLIC_INT_MAC0_QUEUE2
+                               PLIC_INT_MAC0_QUEUE3
+                               PLIC_INT_MAC0_EMAC
+                               PLIC_INT_MAC0_MMSL>;
+                       local-mac-address = [00 00 00 00 00 00];
+                       status = "disabled";
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+               };
+
+               mac1: ethernet@20112000 {
+                       compatible = "cdns,macb";
+                       reg = <0x0 0x20112000 0x0 0x2000>;
+                       clocks = <&clkcfg CLK_MAC1>, <&clkcfg CLK_AHB>;
+                       clock-names = "pclk", "hclk";
+                       interrupt-parent = <&plic>;
+                       interrupts = <PLIC_INT_MAC1_INT
+                               PLIC_INT_MAC1_QUEUE1
+                               PLIC_INT_MAC1_QUEUE2
+                               PLIC_INT_MAC1_QUEUE3
+                               PLIC_INT_MAC1_EMAC
+                               PLIC_INT_MAC1_MMSL>;
+                       local-mac-address = [00 00 00 00 00 00];
+                       status = "disabled";
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+               };
+
+               gpio0: gpio@20120000 {
+                       compatible = "microchip,mpfs-gpio";
+                       reg = <0x0 0x20120000 0x0 0x1000>;
+                       reg-names = "control";
+                       clocks = <&clkcfg CLK_GPIO0>;
+                       interrupt-parent = <&plic>;
+                       gpio-controller;
+                       #gpio-cells = <2>;
+                       status = "disabled";
+               };
+
+               gpio1: gpio@20121000 {
+                       compatible = "microchip,mpfs-gpio";
+                       reg = <000 0x20121000 0x0 0x1000>;
+                       reg-names = "control";
+                       clocks = <&clkcfg CLK_GPIO1>;
+                       interrupt-parent = <&plic>;
+                       gpio-controller;
+                       #gpio-cells = <2>;
+                       status = "disabled";
+               };
+
+               gpio2: gpio@20122000 {
+                       compatible = "microchip,mpfs-gpio";
+                       reg = <0x0 0x20122000 0x0 0x1000>;
+                       reg-names = "control";
+                       clocks = <&clkcfg CLK_GPIO2>;
+                       interrupt-parent = <&plic>;
+                       gpio-controller;
+                       #gpio-cells = <2>;
+                       status = "disabled";
+               };
+
+               rtc: rtc@20124000 {
+                       compatible = "microchip,mpfs-rtc";
+                       reg = <0x0 0x20124000 0x0 0x1000>;
+                       clocks = <&clkcfg CLK_RTC>;
+                       clock-names = "rtc";
+                       interrupt-parent = <&plic>;
+                       interrupts = <PLIC_INT_RTC_WAKEUP PLIC_INT_RTC_MATCH>;
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+                       status = "disabled";
+               };
+
+               usb: usb@20201000 {
+                       compatible = "microchip,mpfs-usb-host";
+                       reg = <0x0 0x20201000 0x0 0x1000>;
+                       reg-names = "mc","control";
+                       clocks = <&clkcfg CLK_USB>;
+                       interrupt-parent = <&plic>;
+                       interrupts = <PLIC_INT_USB_DMA PLIC_INT_USB_MC>;
+                       interrupt-names = "dma","mc";
+                       dr_mode = "host";
+                       status = "disabled";
+               };
+
+               qspi: qspi@21000000 {
+                       compatible = "microchip,mpfs-qspi";
+                       reg = <0x0 0x21000000 0x0 0x1000>;
+                       clocks = <&clkcfg CLK_QSPI>;
+                       interrupt-parent = <&plic>;
+                       interrupts = <PLIC_INT_QSPI>;
+                       num-cs = <8>;
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+                       status = "disabled";
+               };
+
+               mbox: mailbox@37020000 {
+                       compatible = "microchip,mpfs-mailbox";
+                       reg = <0x0 0x37020000 0x0 0x1000>, <0x0 0x2000318C 0x0 0x40>;
+                       interrupt-parent = <&plic>;
+                       interrupts = <PLIC_INT_G5C_MESSAGE>;
+                       #mbox-cells = <1>;
+                       status = "disabled";
+               };
+
+               pcie: pcie@2000000000 {
+                       compatible = "microchip,pcie-host-1.0";
+                       #address-cells = <0x3>;
+                       #interrupt-cells = <0x1>;
+                       #size-cells = <0x2>;
+                       device_type = "pci";
+                       reg = <0x20 0x0 0x0 0x8000000 0x0 0x43000000 0x0 0x10000>;
+                       reg-names = "cfg", "apb";
+                       clocks = <&clkcfg CLK_FIC0>, <&clkcfg CLK_FIC1>, <&clkcfg CLK_FIC3>;
+                       clock-names = "fic0", "fic1", "fic3";
+                       bus-range = <0x0 0x7f>;
+                       interrupt-parent = <&plic>;
+                       interrupts = <PLIC_INT_FABRIC_F2H_2>;
+                       interrupt-map = <0 0 0 1 &pcie_intc 0>,
+                                       <0 0 0 2 &pcie_intc 1>,
+                                       <0 0 0 3 &pcie_intc 2>,
+                                       <0 0 0 4 &pcie_intc 3>;
+                       interrupt-map-mask = <0 0 0 7>;
+                       ranges = <0x3000000 0x0 0x8000000 0x20 0x8000000 0x0 0x80000000>;
+                       msi-parent = <&pcie>;
+                       msi-controller;
+                       mchp,axi-m-atr0 = <0x10 0x0>;
+                       status = "disabled";
+                       pcie_intc: legacy-interrupt-controller {
+                               #address-cells = <0>;
+                               #interrupt-cells = <1>;
+                               interrupt-controller;
+                       };
+               };
+
+               syscontroller: syscontroller {
+                       compatible = "microchip,mpfs-sys-controller";
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+                       mboxes = <&mbox 0>;
+               };
+
+               hwrandom: hwrandom {
+                       compatible = "microchip,mpfs-rng";
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+                       syscontroller = <&syscontroller>;
+               };
+
+               serialnum: serialnum {
+                       compatible = "microchip,mpfs-serial-number";
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+                       syscontroller = <&syscontroller>;
+               };
+
+               fpgadigest: fpgadigest {
+                       compatible = "microchip,mpfs-digest";
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+                       syscontroller = <&syscontroller>;
+               };
+
+               devicecert: cert {
+                       compatible = "microchip,mpfs-device-cert";
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+                       syscontroller = <&syscontroller>;
+               };
+
+               signature: signature {
+                       compatible = "microchip,mpfs-signature";
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+                       syscontroller = <&syscontroller>;
+               };
+       };
+};
diff --git a/include/dt-bindings/interrupt-controller/microchip-mpfs-plic.h b/include/dt-bindings/interrupt-controller/microchip-mpfs-plic.h
new file mode 100644 (file)
index 0000000..eba1bac
--- /dev/null
@@ -0,0 +1,196 @@
+/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */
+/* Copyright (c) 2020-2021 Microchip Technology Inc */
+
+#ifndef _DT_BINDINGS_INTERRUPT_CONTROLLER_MICROCHIP_MPFS_PLIC_H
+#define _DT_BINDINGS_INTERRUPT_CONTROLLER_MICROCHIP_MPFS_PLIC_H
+
+#define PLIC_INT_INVALID                                               0
+#define PLIC_INT_L2_METADATA_CORR                              1
+#define PLIC_INT_L2_METADATA_UNCORR                            2
+#define PLIC_INT_L2_DATA_CORR                                  3
+#define PLIC_INT_L2_DATA_UNCORR                                        4
+#define PLIC_INT_DMA_CH0_DONE                                  5
+#define PLIC_INT_DMA_CH0_ERR                                   6
+#define PLIC_INT_DMA_CH1_DONE                                  7
+#define PLIC_INT_DMA_CH1_ERR                                   8
+#define PLIC_INT_DMA_CH2_DONE                                  9
+#define PLIC_INT_DMA_CH2_ERR                                   10
+#define PLIC_INT_DMA_CH3_DONE                                  11
+#define PLIC_INT_DMA_CH3_ERR                                   12
+
+#define PLIC_INT_GPIO0_BIT0_OR_GPIO2_BIT0              13
+#define PLIC_INT_GPIO0_BIT1_OR_GPIO2_BIT1              14
+#define PLIC_INT_GPIO0_BIT2_OR_GPIO2_BIT2              15
+#define PLIC_INT_GPIO0_BIT3_OR_GPIO2_BIT3              16
+#define PLIC_INT_GPIO0_BIT4_OR_GPIO2_BIT4              17
+#define PLIC_INT_GPIO0_BIT5_OR_GPIO2_BIT5              18
+#define PLIC_INT_GPIO0_BIT6_OR_GPIO2_BIT6              19
+#define PLIC_INT_GPIO0_BIT7_OR_GPIO2_BIT7              20
+#define PLIC_INT_GPIO0_BIT8_OR_GPIO2_BIT8              21
+#define PLIC_INT_GPIO0_BIT9_OR_GPIO2_BIT9              22
+#define PLIC_INT_GPIO0_BIT10_OR_GPIO2_BIT10            23
+#define PLIC_INT_GPIO0_BIT11_OR_GPIO2_BIT11            24
+#define PLIC_INT_GPIO0_BIT12_OR_GPIO2_BIT12            25
+#define PLIC_INT_GPIO0_BIT13_OR_GPIO2_BIT13            26
+#define PLIC_INT_GPIO1_BIT0_OR_GPIO2_BIT14             27
+#define PLIC_INT_GPIO1_BIT1_OR_GPIO2_BIT15             28
+#define PLIC_INT_GPIO1_BIT2_OR_GPIO2_BIT16             29
+#define PLIC_INT_GPIO1_BIT3_OR_GPIO2_BIT17             30
+#define PLIC_INT_GPIO1_BIT4_OR_GPIO2_BIT18             31
+#define PLIC_INT_GPIO1_BIT5_OR_GPIO2_BIT19             32
+#define PLIC_INT_GPIO1_BIT6_OR_GPIO2_BIT20             33
+#define PLIC_INT_GPIO1_BIT7_OR_GPIO2_BIT21             34
+#define PLIC_INT_GPIO1_BIT8_OR_GPIO2_BIT22             35
+#define PLIC_INT_GPIO1_BIT9_OR_GPIO2_BIT23             36
+#define PLIC_INT_GPIO1_BIT10_OR_GPIO2_BIT24            37
+#define PLIC_INT_GPIO1_BIT11_OR_GPIO2_BIT25            38
+#define PLIC_INT_GPIO1_BIT12_OR_GPIO2_BIT26            39
+#define PLIC_INT_GPIO1_BIT13_OR_GPIO2_BIT27            40
+#define PLIC_INT_GPIO1_BIT14_OR_GPIO2_BIT28            41
+#define PLIC_INT_GPIO1_BIT15_OR_GPIO2_BIT29            42
+#define PLIC_INT_GPIO1_BIT16_OR_GPIO2_BIT30            43
+#define PLIC_INT_GPIO1_BIT17_OR_GPIO2_BIT31            44
+#define PLIC_INT_GPIO1_BIT18                                   45
+#define PLIC_INT_GPIO1_BIT19                                   46
+#define PLIC_INT_GPIO1_BIT20                                   47
+#define PLIC_INT_GPIO1_BIT21                                   48
+#define PLIC_INT_GPIO1_BIT22                                   49
+#define PLIC_INT_GPIO1_BIT23                                   50
+#define PLIC_INT_GPIO0_NON_DIRECT                              51
+#define PLIC_INT_GPIO1_NON_DIRECT                              52
+#define PLIC_INT_GPIO2_NON_DIRECT                              53
+#define PLIC_INT_SPI0                                                  54
+#define PLIC_INT_SPI1                                                  55
+#define PLIC_INT_CAN0                                                  56
+#define PLIC_INT_CAN1                                                  57
+#define PLIC_INT_I2C0_MAIN                                             58
+#define PLIC_INT_I2C0_ALERT                                            59
+#define PLIC_INT_I2C0_SUS                                              60
+#define PLIC_INT_I2C1_MAIN                                             61
+#define PLIC_INT_I2C1_ALERT                                            62
+#define PLIC_INT_I2C1_SUS                                              63
+#define PLIC_INT_MAC0_INT                                              64
+#define PLIC_INT_MAC0_QUEUE1                                   65
+#define PLIC_INT_MAC0_QUEUE2                                   66
+#define PLIC_INT_MAC0_QUEUE3                                   67
+#define PLIC_INT_MAC0_EMAC                                             68
+#define PLIC_INT_MAC0_MMSL                                             69
+#define PLIC_INT_MAC1_INT                                              70
+#define PLIC_INT_MAC1_QUEUE1                                   71
+#define PLIC_INT_MAC1_QUEUE2                                   72
+#define PLIC_INT_MAC1_QUEUE3                                   73
+#define PLIC_INT_MAC1_EMAC                                             74
+#define PLIC_INT_MAC1_MMSL                                             75
+#define PLIC_INT_DDRC_TRAIN                                            76
+#define PLIC_INT_SCB_INTERRUPT                                 77
+#define PLIC_INT_ECC_ERROR                                             78
+#define PLIC_INT_ECC_CORRECT                                   79
+#define PLIC_INT_RTC_WAKEUP                                            80
+#define PLIC_INT_RTC_MATCH                                             81
+#define PLIC_INT_TIMER1                                                        82
+#define PLIC_INT_TIMER2                                                        83
+#define PLIC_INT_ENVM                                                  84
+#define PLIC_INT_QSPI                                                  85
+#define PLIC_INT_USB_DMA                                               86
+#define PLIC_INT_USB_MC                                                        87
+#define PLIC_INT_MMC_MAIN                                              88
+#define PLIC_INT_MMC_WAKEUP                                            89
+#define PLIC_INT_MMUART0                                               90
+#define PLIC_INT_MMUART1                                               91
+#define PLIC_INT_MMUART2                                               92
+#define PLIC_INT_MMUART3                                               93
+#define PLIC_INT_MMUART4                                               94
+#define PLIC_INT_G5C_DEVRST                                            95
+#define PLIC_INT_G5C_MESSAGE                                   96
+#define PLIC_INT_USOC_VC_INTERRUPT                             97
+#define PLIC_INT_USOC_SMB_INTERRUPT                            98
+#define PLIC_INT_E51_0_MAINTENACE                              99
+#define PLIC_INT_WDOG0_MRVP                                            100
+#define PLIC_INT_WDOG1_MRVP                                            101
+#define PLIC_INT_WDOG2_MRVP                                            102
+#define PLIC_INT_WDOG3_MRVP                                            103
+#define PLIC_INT_WDOG4_MRVP                                            104
+#define PLIC_INT_WDOG0_TOUT                                            105
+#define PLIC_INT_WDOG1_TOUT                                            106
+#define PLIC_INT_WDOG2_TOUT                                            107
+#define PLIC_INT_WDOG3_TOUT                                            108
+#define PLIC_INT_WDOG4_TOUT                                            109
+#define PLIC_INT_G5C_MSS_SPI                                   110
+#define PLIC_INT_VOLT_TEMP_ALARM                               111
+#define PLIC_INT_ATHENA_COMPLETE                               112
+#define PLIC_INT_ATHENA_ALARM                                  113
+#define PLIC_INT_ATHENA_BUS_ERROR                              114
+#define PLIC_INT_USOC_AXIC_US                                  115
+#define PLIC_INT_USOC_AXIC_DS                                  116
+#define PLIC_INT_SPARE                                                 117
+#define PLIC_INT_FABRIC_F2H_0                                  118
+#define PLIC_INT_FABRIC_F2H_1                                  119
+#define PLIC_INT_FABRIC_F2H_2                                  120
+#define PLIC_INT_FABRIC_F2H_3                                  121
+#define PLIC_INT_FABRIC_F2H_4                                  122
+#define PLIC_INT_FABRIC_F2H_5                                  123
+#define PLIC_INT_FABRIC_F2H_6                                  124
+#define PLIC_INT_FABRIC_F2H_7                                  125
+#define PLIC_INT_FABRIC_F2H_8                                  126
+#define PLIC_INT_FABRIC_F2H_9                                  127
+#define PLIC_INT_FABRIC_F2H_10                                 128
+#define PLIC_INT_FABRIC_F2H_11                                 129
+#define PLIC_INT_FABRIC_F2H_12                                 130
+#define PLIC_INT_FABRIC_F2H_13                                 131
+#define PLIC_INT_FABRIC_F2H_14                                 132
+#define PLIC_INT_FABRIC_F2H_15                                 133
+#define PLIC_INT_FABRIC_F2H_16                                 134
+#define PLIC_INT_FABRIC_F2H_17                                 135
+#define PLIC_INT_FABRIC_F2H_18                                 136
+#define PLIC_INT_FABRIC_F2H_19                                 137
+#define PLIC_INT_FABRIC_F2H_20                                 138
+#define PLIC_INT_FABRIC_F2H_21                                 139
+#define PLIC_INT_FABRIC_F2H_22                                 140
+#define PLIC_INT_FABRIC_F2H_23                                 141
+#define PLIC_INT_FABRIC_F2H_24                                 142
+#define PLIC_INT_FABRIC_F2H_25                                 143
+#define PLIC_INT_FABRIC_F2H_26                                 144
+#define PLIC_INT_FABRIC_F2H_27                                 145
+#define PLIC_INT_FABRIC_F2H_28                                 146
+#define PLIC_INT_FABRIC_F2H_29                                 147
+#define PLIC_INT_FABRIC_F2H_30                                 148
+#define PLIC_INT_FABRIC_F2H_31                                 149
+#define PLIC_INT_FABRIC_F2H_32                                 150
+#define PLIC_INT_FABRIC_F2H_33                                 151
+#define PLIC_INT_FABRIC_F2H_34                                 152
+#define PLIC_INT_FABRIC_F2H_35                                 153
+#define PLIC_INT_FABRIC_F2H_36                                 154
+#define PLIC_INT_FABRIC_F2H_37                                 155
+#define PLIC_INT_FABRIC_F2H_38                                 156
+#define PLIC_INT_FABRIC_F2H_39                                 157
+#define PLIC_INT_FABRIC_F2H_40                                 158
+#define PLIC_INT_FABRIC_F2H_41                                 159
+#define PLIC_INT_FABRIC_F2H_42                                 160
+#define PLIC_INT_FABRIC_F2H_43                                 161
+#define PLIC_INT_FABRIC_F2H_44                                 162
+#define PLIC_INT_FABRIC_F2H_45                                 163
+#define PLIC_INT_FABRIC_F2H_46                                 164
+#define PLIC_INT_FABRIC_F2H_47                                 165
+#define PLIC_INT_FABRIC_F2H_48                                 166
+#define PLIC_INT_FABRIC_F2H_49                                 167
+#define PLIC_INT_FABRIC_F2H_50                                 168
+#define PLIC_INT_FABRIC_F2H_51                                 169
+#define PLIC_INT_FABRIC_F2H_52                                 170
+#define PLIC_INT_FABRIC_F2H_53                                 171
+#define PLIC_INT_FABRIC_F2H_54                                 172
+#define PLIC_INT_FABRIC_F2H_55                                 173
+#define PLIC_INT_FABRIC_F2H_56                                 174
+#define PLIC_INT_FABRIC_F2H_57                                 175
+#define PLIC_INT_FABRIC_F2H_58                                 176
+#define PLIC_INT_FABRIC_F2H_59                                 177
+#define PLIC_INT_FABRIC_F2H_60                                 178
+#define PLIC_INT_FABRIC_F2H_61                                 179
+#define PLIC_INT_FABRIC_F2H_62                                 180
+#define PLIC_INT_FABRIC_F2H_63                                 181
+#define PLIC_INT_BUS_ERROR_UNIT_HART_0                 182
+#define PLIC_INT_BUS_ERROR_UNIT_HART_1                 183
+#define PLIC_INT_BUS_ERROR_UNIT_HART_2                 184
+#define PLIC_INT_BUS_ERROR_UNIT_HART_3                 185
+#define PLIC_INT_BUS_ERROR_UNIT_HART_4                 186
+
+#endif /* _DT_BINDINGS_INTERRUPT_CONTROLLER_MICROCHIP_MPFS_PLIC_H */
diff --git a/include/dt-bindings/interrupt-controller/riscv-hart.h b/include/dt-bindings/interrupt-controller/riscv-hart.h
new file mode 100644 (file)
index 0000000..c4331b8
--- /dev/null
@@ -0,0 +1,17 @@
+/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */
+/* Copyright (c) 2020-2021 Microchip Technology Inc */
+
+#ifndef _DT_BINDINGS_INTERRUPT_CONTROLLER_RISCV_HART_H
+#define _DT_BINDINGS_INTERRUPT_CONTROLLER_RISCV_HART_H
+
+#define HART_INT_U_SOFT   0
+#define HART_INT_S_SOFT   1
+#define HART_INT_M_SOFT   3
+#define HART_INT_U_TIMER  4
+#define HART_INT_S_TIMER  5
+#define HART_INT_M_TIMER  7
+#define HART_INT_U_EXT    8
+#define HART_INT_S_EXT    9
+#define HART_INT_M_EXT    11
+
+#endif /* _DT_BINDINGS_INTERRUPT_CONTROLLER_RISCV_HART_H */