ASoC: rt5682s: Fix hp pop produced immediately after resuming

When the system plays a sound immediately after resuming from S3,
it could hear a little pop from headphones.
It is due to the HP was unmuted before the completion of
jack re-detection finished in parallel.

This patch adds a lock to make sure the HP unmute after jack detect handler,
and adds a few depop changes.

Signed-off-by: Derek Fang <derek.fang@realtek.com>
Link: https://lore.kernel.org/r/20211007085519.12543-1-derek.fang@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>

diff --git a/sound/soc/codecs/rt5682s.c b/sound/soc/codecs/rt5682s.c
index 639a50fa95e2b1ec78f27b529591cd17994eccab..9dd1796f33398da589b5aaad02b176daeef5ff89 100644 (file)
--- a/sound/soc/codecs/rt5682s.c
+++ b/sound/soc/codecs/rt5682s.c
@@ -790,6 +790,7 @@ static int rt5682s_headset_detect(struct snd_soc_component *component, int jack_
                snd_soc_component_update_bits(component, RT5682S_HP_CHARGE_PUMP_2,
                        RT5682S_OSW_L_MASK | RT5682S_OSW_R_MASK,
                        RT5682S_OSW_L_EN | RT5682S_OSW_R_EN);
+               usleep_range(35000, 40000);
        } else {
                rt5682s_sar_power_mode(component, SAR_PWR_OFF, 1);
                rt5682s_disable_push_button_irq(component);
@@ -829,6 +830,7 @@ static void rt5682s_jack_detect_handler(struct work_struct *work)
        while (!rt5682s->component->card->instantiated)
                usleep_range(10000, 15000);
 
+       mutex_lock(&rt5682s->jdet_mutex);
        mutex_lock(&rt5682s->calibrate_mutex);
 
        val = snd_soc_component_read(rt5682s->component, RT5682S_AJD1_CTRL)
@@ -896,6 +898,7 @@ static void rt5682s_jack_detect_handler(struct work_struct *work)
                cancel_delayed_work_sync(&rt5682s->jd_check_work);
 
        mutex_unlock(&rt5682s->calibrate_mutex);
+       mutex_unlock(&rt5682s->jdet_mutex);
 }
 
 static void rt5682s_jd_check_handler(struct work_struct *work)
@@ -1318,34 +1321,41 @@ static int rt5682s_hp_amp_event(struct snd_soc_dapm_widget *w,
                struct snd_kcontrol *kcontrol, int event)
 {
        struct snd_soc_component *component = snd_soc_dapm_to_component(w->dapm);
+       struct rt5682s_priv *rt5682s = snd_soc_component_get_drvdata(component);
 
        switch (event) {
-       case SND_SOC_DAPM_PRE_PMU:
+       case SND_SOC_DAPM_POST_PMU:
                snd_soc_component_update_bits(component, RT5682S_DEPOP_1,
                        RT5682S_OUT_HP_L_EN | RT5682S_OUT_HP_R_EN,
                        RT5682S_OUT_HP_L_EN | RT5682S_OUT_HP_R_EN);
+               usleep_range(15000, 20000);
                snd_soc_component_update_bits(component, RT5682S_DEPOP_1,
                        RT5682S_LDO_PUMP_EN | RT5682S_PUMP_EN |
                        RT5682S_CAPLESS_L_EN | RT5682S_CAPLESS_R_EN,
                        RT5682S_LDO_PUMP_EN | RT5682S_PUMP_EN |
                        RT5682S_CAPLESS_L_EN | RT5682S_CAPLESS_R_EN);
-               break;
-
-       case SND_SOC_DAPM_POST_PMU:
-               usleep_range(30000, 35000);
                snd_soc_component_write(component, RT5682S_BIAS_CUR_CTRL_11, 0x6666);
                snd_soc_component_write(component, RT5682S_BIAS_CUR_CTRL_12, 0xa82a);
+
+               mutex_lock(&rt5682s->jdet_mutex);
+
                snd_soc_component_update_bits(component, RT5682S_HP_CTRL_2,
                        RT5682S_HPO_L_PATH_MASK | RT5682S_HPO_R_PATH_MASK |
                        RT5682S_HPO_SEL_IP_EN_SW, RT5682S_HPO_L_PATH_EN |
                        RT5682S_HPO_R_PATH_EN | RT5682S_HPO_IP_EN_GATING);
-               snd_soc_component_write(component, RT5682S_HP_AMP_DET_CTL_1, 0x3050);
+               usleep_range(5000, 10000);
+               snd_soc_component_update_bits(component, RT5682S_HP_AMP_DET_CTL_1,
+                       RT5682S_CP_SW_SIZE_MASK, RT5682S_CP_SW_SIZE_L | RT5682S_CP_SW_SIZE_S);
+
+               mutex_unlock(&rt5682s->jdet_mutex);
                break;
 
        case SND_SOC_DAPM_POST_PMD:
                snd_soc_component_update_bits(component, RT5682S_HP_CTRL_2,
                        RT5682S_HPO_L_PATH_MASK | RT5682S_HPO_R_PATH_MASK |
                        RT5682S_HPO_SEL_IP_EN_SW, 0);
+               snd_soc_component_update_bits(component, RT5682S_HP_AMP_DET_CTL_1,
+                       RT5682S_CP_SW_SIZE_MASK, RT5682S_CP_SW_SIZE_M);
                snd_soc_component_update_bits(component, RT5682S_DEPOP_1,
                        RT5682S_LDO_PUMP_EN | RT5682S_PUMP_EN |
                        RT5682S_CAPLESS_L_EN | RT5682S_CAPLESS_R_EN, 0);
@@ -1734,7 +1744,7 @@ static const struct snd_soc_dapm_widget rt5682s_dapm_widgets[] = {
 
        /* HPO */
        SND_SOC_DAPM_PGA_S("HP Amp", 1, SND_SOC_NOPM, 0, 0, rt5682s_hp_amp_event,
-               SND_SOC_DAPM_POST_PMD | SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMU),
+               SND_SOC_DAPM_POST_PMD | SND_SOC_DAPM_POST_PMU),
 
        /* CLK DET */
        SND_SOC_DAPM_SUPPLY("CLKDET SYS", RT5682S_CLK_DET,
@@ -3061,6 +3071,7 @@ static int rt5682s_i2c_probe(struct i2c_client *i2c,
 
        mutex_init(&rt5682s->calibrate_mutex);
        mutex_init(&rt5682s->sar_mutex);
+       mutex_init(&rt5682s->jdet_mutex);
        rt5682s_calibrate(rt5682s);
 
        regmap_update_bits(rt5682s->regmap, RT5682S_MICBIAS_2,
@@ -3072,6 +3083,8 @@ static int rt5682s_i2c_probe(struct i2c_client *i2c,
                RT5682S_HP_SIG_SRC_MASK, RT5682S_HP_SIG_SRC_1BIT_CTL);
        regmap_update_bits(rt5682s->regmap, RT5682S_HP_CHARGE_PUMP_2,
                RT5682S_PM_HP_MASK, RT5682S_PM_HP_HV);
+       regmap_update_bits(rt5682s->regmap, RT5682S_HP_AMP_DET_CTL_1,
+               RT5682S_CP_SW_SIZE_MASK, RT5682S_CP_SW_SIZE_M);
 
        /* DMIC data pin */
        switch (rt5682s->pdata.dmic1_data_pin) {

diff --git a/sound/soc/codecs/rt5682s.h b/sound/soc/codecs/rt5682s.h
index 59ba4ea3b0626f7e2d048d5ea92c3363d950718a..1bf2ef7ce57843b423c7277323df6d53c945f924 100644 (file)
--- a/sound/soc/codecs/rt5682s.h
+++ b/sound/soc/codecs/rt5682s.h
@@ -1366,6 +1366,11 @@
 #define RT5682S_SAR_SOUR_BTN                   (0x3f)
 #define RT5682S_SAR_SOUR_TYPE                  (0x0)
 
+/* Headphone Amp Detection Control 1 (0x3b00) */
+#define RT5682S_CP_SW_SIZE_MASK                        (0x7 << 4)
+#define RT5682S_CP_SW_SIZE_L                   (0x4 << 4)
+#define RT5682S_CP_SW_SIZE_M                   (0x2 << 4)
+#define RT5682S_CP_SW_SIZE_S                   (0x1 << 4)
 
 #define RT5682S_STEREO_RATES SNDRV_PCM_RATE_8000_192000
 #define RT5682S_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S20_3LE | \
@@ -1441,6 +1446,7 @@ struct rt5682s_priv {
        struct delayed_work jd_check_work;
        struct mutex calibrate_mutex;
        struct mutex sar_mutex;
+       struct mutex jdet_mutex;
 
 #ifdef CONFIG_COMMON_CLK
        struct clk_hw dai_clks_hw[RT5682S_DAI_NUM_CLKS];