b43: bus: abstract SPROM

SPROM is another frequently used struct. We decided to share SPROM
struct between ssb na bcma as long as we will not need any hacks.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

diff --git a/drivers/net/wireless/b43/bus.c b/drivers/net/wireless/b43/bus.c
index be3d206..c116f12 100644 (file)
--- a/drivers/net/wireless/b43/bus.c
+++ b/drivers/net/wireless/b43/bus.c
@@ -70,6 +70,8 @@ struct b43_bus_dev *b43_bus_dev_ssb_init(struct ssb_device *sdev)
        dev->block_read = b43_bus_ssb_block_read;
        dev->block_write = b43_bus_ssb_block_write;
 
+       dev->bus_sprom = &sdev->bus->sprom;
+
        dev->core_id = sdev->id.coreid;
        dev->core_rev = sdev->id.revision;
 

diff --git a/drivers/net/wireless/b43/bus.h b/drivers/net/wireless/b43/bus.h
index 742f084..6d575d6 100644 (file)
--- a/drivers/net/wireless/b43/bus.h
+++ b/drivers/net/wireless/b43/bus.h
@@ -20,6 +20,8 @@ struct b43_bus_dev {
        void (*block_write)(struct b43_bus_dev *dev, const void *buffer,
                            size_t count, u16 offset, u8 reg_width);
 
+       struct ssb_sprom *bus_sprom;
+
        u16 core_id;
        u8 core_rev;
 };

diff --git a/drivers/net/wireless/b43/leds.c b/drivers/net/wireless/b43/leds.c
index 0cafafe..26d37ef 100644 (file)
--- a/drivers/net/wireless/b43/leds.c
+++ b/drivers/net/wireless/b43/leds.c
@@ -218,10 +218,10 @@ static void b43_led_get_sprominfo(struct b43_wldev *dev,
        struct ssb_bus *bus = dev->sdev->bus;
        u8 sprom[4];
 
-       sprom[0] = bus->sprom.gpio0;
-       sprom[1] = bus->sprom.gpio1;
-       sprom[2] = bus->sprom.gpio2;
-       sprom[3] = bus->sprom.gpio3;
+       sprom[0] = dev->dev->bus_sprom->gpio0;
+       sprom[1] = dev->dev->bus_sprom->gpio1;
+       sprom[2] = dev->dev->bus_sprom->gpio2;
+       sprom[3] = dev->dev->bus_sprom->gpio3;
 
        if (sprom[led_index] == 0xFF) {
                /* There is no LED information in the SPROM

diff --git a/drivers/net/wireless/b43/lo.c b/drivers/net/wireless/b43/lo.c
index 2ef7d4b..b32efd4 100644 (file)
--- a/drivers/net/wireless/b43/lo.c
+++ b/drivers/net/wireless/b43/lo.c
@@ -98,7 +98,7 @@ static u16 lo_measure_feedthrough(struct b43_wldev *dev,
                rfover |= pga;
                rfover |= lna;
                rfover |= trsw_rx;
-               if ((dev->sdev->bus->sprom.boardflags_lo & B43_BFL_EXTLNA)
+               if ((dev->dev->bus_sprom->boardflags_lo & B43_BFL_EXTLNA)
                    && phy->rev > 6)
                        rfover |= B43_PHY_RFOVERVAL_EXTLNA;
 
@@ -387,7 +387,7 @@ struct lo_g_saved_values {
 static void lo_measure_setup(struct b43_wldev *dev,
                             struct lo_g_saved_values *sav)
 {
-       struct ssb_sprom *sprom = &dev->sdev->bus->sprom;
+       struct ssb_sprom *sprom = dev->dev->bus_sprom;
        struct b43_phy *phy = &dev->phy;
        struct b43_phy_g *gphy = phy->g;
        struct b43_txpower_lo_control *lo = gphy->lo_control;

diff --git a/drivers/net/wireless/b43/main.c b/drivers/net/wireless/b43/main.c
index 971ec1b..0f3a104 100644 (file)
--- a/drivers/net/wireless/b43/main.c
+++ b/drivers/net/wireless/b43/main.c
@@ -1427,9 +1427,9 @@ u8 b43_ieee80211_antenna_sanitize(struct b43_wldev *dev,
 
        /* Get the mask of available antennas. */
        if (dev->phy.gmode)
-               antenna_mask = dev->sdev->bus->sprom.ant_available_bg;
+               antenna_mask = dev->dev->bus_sprom->ant_available_bg;
        else
-               antenna_mask = dev->sdev->bus->sprom.ant_available_a;
+               antenna_mask = dev->dev->bus_sprom->ant_available_a;
 
        if (!(antenna_mask & (1 << (antenna_nr - 1)))) {
                /* This antenna is not available. Fall back to default. */
@@ -2599,7 +2599,7 @@ static int b43_gpio_init(struct b43_wldev *dev)
                mask |= 0x0180;
                set |= 0x0180;
        }
-       if (dev->sdev->bus->sprom.boardflags_lo & B43_BFL_PACTRL) {
+       if (dev->dev->bus_sprom->boardflags_lo & B43_BFL_PACTRL) {
                b43_write16(dev, B43_MMIO_GPIO_MASK,
                            b43_read16(dev, B43_MMIO_GPIO_MASK)
                            | 0x0200);
@@ -4204,7 +4204,7 @@ static void setup_struct_wldev_for_init(struct b43_wldev *dev)
 
 static void b43_bluetooth_coext_enable(struct b43_wldev *dev)
 {
-       struct ssb_sprom *sprom = &dev->sdev->bus->sprom;
+       struct ssb_sprom *sprom = dev->dev->bus_sprom;
        u64 hf;
 
        if (!modparam_btcoex)
@@ -4318,7 +4318,7 @@ static void b43_wireless_core_exit(struct b43_wldev *dev)
 static int b43_wireless_core_init(struct b43_wldev *dev)
 {
        struct ssb_bus *bus = dev->sdev->bus;
-       struct ssb_sprom *sprom = &bus->sprom;
+       struct ssb_sprom *sprom = dev->dev->bus_sprom;
        struct b43_phy *phy = &dev->phy;
        int err;
        u64 hf;

diff --git a/drivers/net/wireless/b43/phy_a.c b/drivers/net/wireless/b43/phy_a.c
index b01c8ce..821b516 100644 (file)
--- a/drivers/net/wireless/b43/phy_a.c
+++ b/drivers/net/wireless/b43/phy_a.c
@@ -311,7 +311,7 @@ void b43_phy_inita(struct b43_wldev *dev)
        }
 
        if ((phy->type == B43_PHYTYPE_G) &&
-           (dev->sdev->bus->sprom.boardflags_lo & B43_BFL_PACTRL)) {
+           (dev->dev->bus_sprom->boardflags_lo & B43_BFL_PACTRL)) {
                b43_phy_maskset(dev, B43_PHY_OFDM(0x6E), 0xE000, 0x3CF);
        }
 }
@@ -323,17 +323,17 @@ static int b43_aphy_init_tssi2dbm_table(struct b43_wldev *dev)
        struct b43_phy_a *aphy = phy->a;
        s16 pab0, pab1, pab2;
 
-       pab0 = (s16) (dev->sdev->bus->sprom.pa1b0);
-       pab1 = (s16) (dev->sdev->bus->sprom.pa1b1);
-       pab2 = (s16) (dev->sdev->bus->sprom.pa1b2);
+       pab0 = (s16) (dev->dev->bus_sprom->pa1b0);
+       pab1 = (s16) (dev->dev->bus_sprom->pa1b1);
+       pab2 = (s16) (dev->dev->bus_sprom->pa1b2);
 
        if (pab0 != 0 && pab1 != 0 && pab2 != 0 &&
            pab0 != -1 && pab1 != -1 && pab2 != -1) {
                /* The pabX values are set in SPROM. Use them. */
-               if ((s8) dev->sdev->bus->sprom.itssi_a != 0 &&
-                   (s8) dev->sdev->bus->sprom.itssi_a != -1)
+               if ((s8) dev->dev->bus_sprom->itssi_a != 0 &&
+                   (s8) dev->dev->bus_sprom->itssi_a != -1)
                        aphy->tgt_idle_tssi =
-                           (s8) (dev->sdev->bus->sprom.itssi_a);
+                           (s8) (dev->dev->bus_sprom->itssi_a);
                else
                        aphy->tgt_idle_tssi = 62;
                aphy->tssi2dbm = b43_generate_dyn_tssi2dbm_tab(dev, pab0,

diff --git a/drivers/net/wireless/b43/phy_g.c b/drivers/net/wireless/b43/phy_g.c
index 1758a28..ccb02af 100644 (file)
--- a/drivers/net/wireless/b43/phy_g.c
+++ b/drivers/net/wireless/b43/phy_g.c
@@ -718,7 +718,7 @@ static void b43_calc_nrssi_threshold(struct b43_wldev *dev)
        B43_WARN_ON(phy->type != B43_PHYTYPE_G);
 
        if (!phy->gmode ||
-           !(dev->sdev->bus->sprom.boardflags_lo & B43_BFL_RSSI)) {
+           !(dev->dev->bus_sprom->boardflags_lo & B43_BFL_RSSI)) {
                tmp16 = b43_nrssi_hw_read(dev, 0x20);
                if (tmp16 >= 0x20)
                        tmp16 -= 0x40;
@@ -1114,7 +1114,7 @@ static u16 radio2050_rfover_val(struct b43_wldev *dev,
 {
        struct b43_phy *phy = &dev->phy;
        struct b43_phy_g *gphy = phy->g;
-       struct ssb_sprom *sprom = &(dev->sdev->bus->sprom);
+       struct ssb_sprom *sprom = dev->dev->bus_sprom;
 
        if (!phy->gmode)
                return 0;
@@ -1620,7 +1620,7 @@ static void b43_phy_initb6(struct b43_wldev *dev)
                b43_radio_write16(dev, 0x5A, 0x88);
                b43_radio_write16(dev, 0x5B, 0x6B);
                b43_radio_write16(dev, 0x5C, 0x0F);
-               if (dev->sdev->bus->sprom.boardflags_lo & B43_BFL_ALTIQ) {
+               if (dev->dev->bus_sprom->boardflags_lo & B43_BFL_ALTIQ) {
                        b43_radio_write16(dev, 0x5D, 0xFA);
                        b43_radio_write16(dev, 0x5E, 0xD8);
                } else {
@@ -1787,7 +1787,7 @@ static void b43_calc_loopback_gain(struct b43_wldev *dev)
        b43_phy_set(dev, B43_PHY_RFOVER, 0x0100);
        b43_phy_mask(dev, B43_PHY_RFOVERVAL, 0xCFFF);
 
-       if (dev->sdev->bus->sprom.boardflags_lo & B43_BFL_EXTLNA) {
+       if (dev->dev->bus_sprom->boardflags_lo & B43_BFL_EXTLNA) {
                if (phy->rev >= 7) {
                        b43_phy_set(dev, B43_PHY_RFOVER, 0x0800);
                        b43_phy_set(dev, B43_PHY_RFOVERVAL, 0x8000);
@@ -2053,7 +2053,7 @@ static void b43_phy_initg(struct b43_wldev *dev)
        if (phy->rev >= 6) {
                b43_phy_maskset(dev, B43_PHY_CCK(0x36), 0x0FFF, (gphy->lo_control->tx_bias << 12));
        }
-       if (dev->sdev->bus->sprom.boardflags_lo & B43_BFL_PACTRL)
+       if (dev->dev->bus_sprom->boardflags_lo & B43_BFL_PACTRL)
                b43_phy_write(dev, B43_PHY_CCK(0x2E), 0x8075);
        else
                b43_phy_write(dev, B43_PHY_CCK(0x2E), 0x807F);
@@ -2066,7 +2066,7 @@ static void b43_phy_initg(struct b43_wldev *dev)
                b43_phy_write(dev, B43_PHY_LO_MASK, 0x8078);
        }
 
-       if (!(dev->sdev->bus->sprom.boardflags_lo & B43_BFL_RSSI)) {
+       if (!(dev->dev->bus_sprom->boardflags_lo & B43_BFL_RSSI)) {
                /* The specs state to update the NRSSI LT with
                 * the value 0x7FFFFFFF here. I think that is some weird
                 * compiler optimization in the original driver.
@@ -2105,7 +2105,7 @@ void b43_gphy_channel_switch(struct b43_wldev *dev,
        b43_write16(dev, B43_MMIO_CHANNEL, channel2freq_bg(channel));
 
        if (channel == 14) {
-               if (dev->sdev->bus->sprom.country_code ==
+               if (dev->dev->bus_sprom->country_code ==
                    SSB_SPROM1CCODE_JAPAN)
                        b43_hf_write(dev,
                                     b43_hf_read(dev) & ~B43_HF_ACPR);
@@ -2384,9 +2384,9 @@ static int b43_gphy_init_tssi2dbm_table(struct b43_wldev *dev)
        struct b43_phy_g *gphy = phy->g;
        s16 pab0, pab1, pab2;
 
-       pab0 = (s16) (dev->sdev->bus->sprom.pa0b0);
-       pab1 = (s16) (dev->sdev->bus->sprom.pa0b1);
-       pab2 = (s16) (dev->sdev->bus->sprom.pa0b2);
+       pab0 = (s16) (dev->dev->bus_sprom->pa0b0);
+       pab1 = (s16) (dev->dev->bus_sprom->pa0b1);
+       pab2 = (s16) (dev->dev->bus_sprom->pa0b2);
 
        B43_WARN_ON((dev->sdev->bus->chip_id == 0x4301) &&
                    (phy->radio_ver != 0x2050)); /* Not supported anymore */
@@ -2396,10 +2396,10 @@ static int b43_gphy_init_tssi2dbm_table(struct b43_wldev *dev)
        if (pab0 != 0 && pab1 != 0 && pab2 != 0 &&
            pab0 != -1 && pab1 != -1 && pab2 != -1) {
                /* The pabX values are set in SPROM. Use them. */
-               if ((s8) dev->sdev->bus->sprom.itssi_bg != 0 &&
-                   (s8) dev->sdev->bus->sprom.itssi_bg != -1) {
+               if ((s8) dev->dev->bus_sprom->itssi_bg != 0 &&
+                   (s8) dev->dev->bus_sprom->itssi_bg != -1) {
                        gphy->tgt_idle_tssi =
-                               (s8) (dev->sdev->bus->sprom.itssi_bg);
+                               (s8) (dev->dev->bus_sprom->itssi_bg);
                } else
                        gphy->tgt_idle_tssi = 62;
                gphy->tssi2dbm = b43_generate_dyn_tssi2dbm_tab(dev, pab0,
@@ -2840,7 +2840,7 @@ static void b43_gphy_op_adjust_txpower(struct b43_wldev *dev)
                                    B43_TXCTL_TXMIX;
                                rfatt += 2;
                                bbatt += 2;
-                       } else if (dev->sdev->bus->sprom.
+                       } else if (dev->dev->bus_sprom->
                                   boardflags_lo &
                                   B43_BFL_PACTRL) {
                                bbatt += 4 * (rfatt - 2);
@@ -2914,14 +2914,14 @@ static enum b43_txpwr_result b43_gphy_op_recalc_txpower(struct b43_wldev *dev,
        estimated_pwr = b43_gphy_estimate_power_out(dev, average_tssi);
 
        B43_WARN_ON(phy->type != B43_PHYTYPE_G);
-       max_pwr = dev->sdev->bus->sprom.maxpwr_bg;
-       if (dev->sdev->bus->sprom.boardflags_lo & B43_BFL_PACTRL)
+       max_pwr = dev->dev->bus_sprom->maxpwr_bg;
+       if (dev->dev->bus_sprom->boardflags_lo & B43_BFL_PACTRL)
                max_pwr -= 3; /* minus 0.75 */
        if (unlikely(max_pwr >= INT_TO_Q52(30/*dBm*/))) {
                b43warn(dev->wl,
                        "Invalid max-TX-power value in SPROM.\n");
                max_pwr = INT_TO_Q52(20); /* fake it */
-               dev->sdev->bus->sprom.maxpwr_bg = max_pwr;
+               dev->dev->bus_sprom->maxpwr_bg = max_pwr;
        }
 
        /* Get desired power (in Q5.2) */
@@ -3014,7 +3014,7 @@ static void b43_gphy_op_pwork_60sec(struct b43_wldev *dev)
 {
        struct b43_phy *phy = &dev->phy;
 
-       if (!(dev->sdev->bus->sprom.boardflags_lo & B43_BFL_RSSI))
+       if (!(dev->dev->bus_sprom->boardflags_lo & B43_BFL_RSSI))
                return;
 
        b43_mac_suspend(dev);

diff --git a/drivers/net/wireless/b43/phy_lp.c b/drivers/net/wireless/b43/phy_lp.c
index 012c8da..41d0281 100644 (file)
--- a/drivers/net/wireless/b43/phy_lp.c
+++ b/drivers/net/wireless/b43/phy_lp.c
@@ -85,39 +85,39 @@ static void b43_lpphy_op_free(struct b43_wldev *dev)
 /* http://bcm-v4.sipsolutions.net/802.11/PHY/LP/ReadBandSrom */
 static void lpphy_read_band_sprom(struct b43_wldev *dev)
 {
+       struct ssb_sprom *sprom = dev->dev->bus_sprom;
        struct b43_phy_lp *lpphy = dev->phy.lp;
-       struct ssb_bus *bus = dev->sdev->bus;
        u16 cckpo, maxpwr;
        u32 ofdmpo;
        int i;
 
        if (b43_current_band(dev->wl) == IEEE80211_BAND_2GHZ) {
-               lpphy->tx_isolation_med_band = bus->sprom.tri2g;
-               lpphy->bx_arch = bus->sprom.bxa2g;
-               lpphy->rx_pwr_offset = bus->sprom.rxpo2g;
-               lpphy->rssi_vf = bus->sprom.rssismf2g;
-               lpphy->rssi_vc = bus->sprom.rssismc2g;
-               lpphy->rssi_gs = bus->sprom.rssisav2g;
-               lpphy->txpa[0] = bus->sprom.pa0b0;
-               lpphy->txpa[1] = bus->sprom.pa0b1;
-               lpphy->txpa[2] = bus->sprom.pa0b2;
-               maxpwr = bus->sprom.maxpwr_bg;
+               lpphy->tx_isolation_med_band = sprom->tri2g;
+               lpphy->bx_arch = sprom->bxa2g;
+               lpphy->rx_pwr_offset = sprom->rxpo2g;
+               lpphy->rssi_vf = sprom->rssismf2g;
+               lpphy->rssi_vc = sprom->rssismc2g;
+               lpphy->rssi_gs = sprom->rssisav2g;
+               lpphy->txpa[0] = sprom->pa0b0;
+               lpphy->txpa[1] = sprom->pa0b1;
+               lpphy->txpa[2] = sprom->pa0b2;
+               maxpwr = sprom->maxpwr_bg;
                lpphy->max_tx_pwr_med_band = maxpwr;
-               cckpo = bus->sprom.cck2gpo;
+               cckpo = sprom->cck2gpo;
                /*
                 * We don't read SPROM's opo as specs say. On rev8 SPROMs
                 * opo == ofdm2gpo and we don't know any SSB with LP-PHY
                 * and SPROM rev below 8.
                 */
-               B43_WARN_ON(bus->sprom.revision < 8);
-               ofdmpo = bus->sprom.ofdm2gpo;
+               B43_WARN_ON(sprom->revision < 8);
+               ofdmpo = sprom->ofdm2gpo;
                if (cckpo) {
                        for (i = 0; i < 4; i++) {
                                lpphy->tx_max_rate[i] =
                                        maxpwr - (ofdmpo & 0xF) * 2;
                                ofdmpo >>= 4;
                        }
-                       ofdmpo = bus->sprom.ofdm2gpo;
+                       ofdmpo = sprom->ofdm2gpo;
                        for (i = 4; i < 15; i++) {
                                lpphy->tx_max_rate[i] =
                                        maxpwr - (ofdmpo & 0xF) * 2;
@@ -131,39 +131,39 @@ static void lpphy_read_band_sprom(struct b43_wldev *dev)
                                lpphy->tx_max_rate[i] = maxpwr - ofdmpo;
                }
        } else { /* 5GHz */
-               lpphy->tx_isolation_low_band = bus->sprom.tri5gl;
-               lpphy->tx_isolation_med_band = bus->sprom.tri5g;
-               lpphy->tx_isolation_hi_band = bus->sprom.tri5gh;
-               lpphy->bx_arch = bus->sprom.bxa5g;
-               lpphy->rx_pwr_offset = bus->sprom.rxpo5g;
-               lpphy->rssi_vf = bus->sprom.rssismf5g;
-               lpphy->rssi_vc = bus->sprom.rssismc5g;
-               lpphy->rssi_gs = bus->sprom.rssisav5g;
-               lpphy->txpa[0] = bus->sprom.pa1b0;
-               lpphy->txpa[1] = bus->sprom.pa1b1;
-               lpphy->txpa[2] = bus->sprom.pa1b2;
-               lpphy->txpal[0] = bus->sprom.pa1lob0;
-               lpphy->txpal[1] = bus->sprom.pa1lob1;
-               lpphy->txpal[2] = bus->sprom.pa1lob2;
-               lpphy->txpah[0] = bus->sprom.pa1hib0;
-               lpphy->txpah[1] = bus->sprom.pa1hib1;
-               lpphy->txpah[2] = bus->sprom.pa1hib2;
-               maxpwr = bus->sprom.maxpwr_al;
-               ofdmpo = bus->sprom.ofdm5glpo;
+               lpphy->tx_isolation_low_band = sprom->tri5gl;
+               lpphy->tx_isolation_med_band = sprom->tri5g;
+               lpphy->tx_isolation_hi_band = sprom->tri5gh;
+               lpphy->bx_arch = sprom->bxa5g;
+               lpphy->rx_pwr_offset = sprom->rxpo5g;
+               lpphy->rssi_vf = sprom->rssismf5g;
+               lpphy->rssi_vc = sprom->rssismc5g;
+               lpphy->rssi_gs = sprom->rssisav5g;
+               lpphy->txpa[0] = sprom->pa1b0;
+               lpphy->txpa[1] = sprom->pa1b1;
+               lpphy->txpa[2] = sprom->pa1b2;
+               lpphy->txpal[0] = sprom->pa1lob0;
+               lpphy->txpal[1] = sprom->pa1lob1;
+               lpphy->txpal[2] = sprom->pa1lob2;
+               lpphy->txpah[0] = sprom->pa1hib0;
+               lpphy->txpah[1] = sprom->pa1hib1;
+               lpphy->txpah[2] = sprom->pa1hib2;
+               maxpwr = sprom->maxpwr_al;
+               ofdmpo = sprom->ofdm5glpo;
                lpphy->max_tx_pwr_low_band = maxpwr;
                for (i = 4; i < 12; i++) {
                        lpphy->tx_max_ratel[i] = maxpwr - (ofdmpo & 0xF) * 2;
                        ofdmpo >>= 4;
                }
-               maxpwr = bus->sprom.maxpwr_a;
-               ofdmpo = bus->sprom.ofdm5gpo;
+               maxpwr = sprom->maxpwr_a;
+               ofdmpo = sprom->ofdm5gpo;
                lpphy->max_tx_pwr_med_band = maxpwr;
                for (i = 4; i < 12; i++) {
                        lpphy->tx_max_rate[i] = maxpwr - (ofdmpo & 0xF) * 2;
                        ofdmpo >>= 4;
                }
-               maxpwr = bus->sprom.maxpwr_ah;
-               ofdmpo = bus->sprom.ofdm5ghpo;
+               maxpwr = sprom->maxpwr_ah;
+               ofdmpo = sprom->ofdm5ghpo;
                lpphy->max_tx_pwr_hi_band = maxpwr;
                for (i = 4; i < 12; i++) {
                        lpphy->tx_max_rateh[i] = maxpwr - (ofdmpo & 0xF) * 2;
@@ -215,6 +215,7 @@ static void lpphy_table_init(struct b43_wldev *dev)
 static void lpphy_baseband_rev0_1_init(struct b43_wldev *dev)
 {
        struct ssb_bus *bus = dev->sdev->bus;
+       struct ssb_sprom *sprom = dev->dev->bus_sprom;
        struct b43_phy_lp *lpphy = dev->phy.lp;
        u16 tmp, tmp2;
 
@@ -242,9 +243,9 @@ static void lpphy_baseband_rev0_1_init(struct b43_wldev *dev)
        b43_phy_maskset(dev, B43_LPPHY_CRS_ED_THRESH, 0x00FF, 0xAD00);
        b43_phy_maskset(dev, B43_LPPHY_INPUT_PWRDB,
                        0xFF00, lpphy->rx_pwr_offset);
-       if ((bus->sprom.boardflags_lo & B43_BFL_FEM) &&
+       if ((sprom->boardflags_lo & B43_BFL_FEM) &&
           ((b43_current_band(dev->wl) == IEEE80211_BAND_5GHZ) ||
-          (bus->sprom.boardflags_hi & B43_BFH_PAREF))) {
+          (sprom->boardflags_hi & B43_BFH_PAREF))) {
                ssb_pmu_set_ldo_voltage(&bus->chipco, LDO_PAREF, 0x28);
                ssb_pmu_set_ldo_paref(&bus->chipco, true);
                if (dev->phy.rev == 0) {
@@ -260,7 +261,7 @@ static void lpphy_baseband_rev0_1_init(struct b43_wldev *dev)
        }
        tmp = lpphy->rssi_vf | lpphy->rssi_vc << 4 | 0xA000;
        b43_phy_write(dev, B43_LPPHY_AFE_RSSI_CTL_0, tmp);
-       if (bus->sprom.boardflags_hi & B43_BFH_RSSIINV)
+       if (sprom->boardflags_hi & B43_BFH_RSSIINV)
                b43_phy_maskset(dev, B43_LPPHY_AFE_RSSI_CTL_1, 0xF000, 0x0AAA);
        else
                b43_phy_maskset(dev, B43_LPPHY_AFE_RSSI_CTL_1, 0xF000, 0x02AA);
@@ -268,7 +269,7 @@ static void lpphy_baseband_rev0_1_init(struct b43_wldev *dev)
        b43_phy_maskset(dev, B43_LPPHY_RX_RADIO_CTL,
                        0xFFF9, (lpphy->bx_arch << 1));
        if (dev->phy.rev == 1 &&
-          (bus->sprom.boardflags_hi & B43_BFH_FEM_BT)) {
+          (sprom->boardflags_hi & B43_BFH_FEM_BT)) {
                b43_phy_maskset(dev, B43_LPPHY_TR_LOOKUP_1, 0xFFC0, 0x000A);
                b43_phy_maskset(dev, B43_LPPHY_TR_LOOKUP_1, 0x3F00, 0x0900);
                b43_phy_maskset(dev, B43_LPPHY_TR_LOOKUP_2, 0xFFC0, 0x000A);
@@ -287,7 +288,7 @@ static void lpphy_baseband_rev0_1_init(struct b43_wldev *dev)
                b43_phy_maskset(dev, B43_LPPHY_TR_LOOKUP_8, 0xC0FF, 0x0B00);
        } else if (b43_current_band(dev->wl) == IEEE80211_BAND_5GHZ ||
                  (bus->boardinfo.type == 0x048A) || ((dev->phy.rev == 0) &&
-                 (bus->sprom.boardflags_lo & B43_BFL_FEM))) {
+                 (sprom->boardflags_lo & B43_BFL_FEM))) {
                b43_phy_maskset(dev, B43_LPPHY_TR_LOOKUP_1, 0xFFC0, 0x0001);
                b43_phy_maskset(dev, B43_LPPHY_TR_LOOKUP_1, 0xC0FF, 0x0400);
                b43_phy_maskset(dev, B43_LPPHY_TR_LOOKUP_2, 0xFFC0, 0x0001);
@@ -297,7 +298,7 @@ static void lpphy_baseband_rev0_1_init(struct b43_wldev *dev)
                b43_phy_maskset(dev, B43_LPPHY_TR_LOOKUP_4, 0xFFC0, 0x0002);
                b43_phy_maskset(dev, B43_LPPHY_TR_LOOKUP_4, 0xC0FF, 0x0A00);
        } else if (dev->phy.rev == 1 ||
-                 (bus->sprom.boardflags_lo & B43_BFL_FEM)) {
+                 (sprom->boardflags_lo & B43_BFL_FEM)) {
                b43_phy_maskset(dev, B43_LPPHY_TR_LOOKUP_1, 0xFFC0, 0x0004);
                b43_phy_maskset(dev, B43_LPPHY_TR_LOOKUP_1, 0xC0FF, 0x0800);
                b43_phy_maskset(dev, B43_LPPHY_TR_LOOKUP_2, 0xFFC0, 0x0004);
@@ -316,13 +317,13 @@ static void lpphy_baseband_rev0_1_init(struct b43_wldev *dev)
                b43_phy_maskset(dev, B43_LPPHY_TR_LOOKUP_4, 0xFFC0, 0x0006);
                b43_phy_maskset(dev, B43_LPPHY_TR_LOOKUP_4, 0xC0FF, 0x0700);
        }
-       if (dev->phy.rev == 1 && (bus->sprom.boardflags_hi & B43_BFH_PAREF)) {
+       if (dev->phy.rev == 1 && (sprom->boardflags_hi & B43_BFH_PAREF)) {
                b43_phy_copy(dev, B43_LPPHY_TR_LOOKUP_5, B43_LPPHY_TR_LOOKUP_1);
                b43_phy_copy(dev, B43_LPPHY_TR_LOOKUP_6, B43_LPPHY_TR_LOOKUP_2);
                b43_phy_copy(dev, B43_LPPHY_TR_LOOKUP_7, B43_LPPHY_TR_LOOKUP_3);
                b43_phy_copy(dev, B43_LPPHY_TR_LOOKUP_8, B43_LPPHY_TR_LOOKUP_4);
        }
-       if ((bus->sprom.boardflags_hi & B43_BFH_FEM_BT) &&
+       if ((sprom->boardflags_hi & B43_BFH_FEM_BT) &&
            (bus->chip_id == 0x5354) &&
            (bus->chip_package == SSB_CHIPPACK_BCM4712S)) {
                b43_phy_set(dev, B43_LPPHY_CRSGAIN_CTL, 0x0006);

diff --git a/drivers/net/wireless/b43/phy_n.c b/drivers/net/wireless/b43/phy_n.c
index e395550..46428ad 100644 (file)
--- a/drivers/net/wireless/b43/phy_n.c
+++ b/drivers/net/wireless/b43/phy_n.c
@@ -299,7 +299,7 @@ static void b43_nphy_tx_power_ctrl(struct b43_wldev *dev, bool enable)
 static void b43_nphy_tx_power_fix(struct b43_wldev *dev)
 {
        struct b43_phy_n *nphy = dev->phy.n;
-       struct ssb_sprom *sprom = &(dev->sdev->bus->sprom);
+       struct ssb_sprom *sprom = dev->dev->bus_sprom;
 
        u8 txpi[2], bbmult, i;
        u16 tmp, radio_gain, dac_gain;
@@ -423,7 +423,7 @@ static void b43_radio_init2055_pre(struct b43_wldev *dev)
 static void b43_radio_init2055_post(struct b43_wldev *dev)
 {
        struct b43_phy_n *nphy = dev->phy.n;
-       struct ssb_sprom *sprom = &(dev->sdev->bus->sprom);
+       struct ssb_sprom *sprom = dev->dev->bus_sprom;
        struct ssb_boardinfo *binfo = &(dev->sdev->bus->boardinfo);
        int i;
        u16 val;
@@ -1168,7 +1168,7 @@ static void b43_nphy_adjust_lna_gain_table(struct b43_wldev *dev)
 static void b43_nphy_gain_ctrl_workarounds(struct b43_wldev *dev)
 {
        struct b43_phy_n *nphy = dev->phy.n;
-       struct ssb_sprom *sprom = &(dev->sdev->bus->sprom);
+       struct ssb_sprom *sprom = dev->dev->bus_sprom;
 
        /* PHY rev 0, 1, 2 */
        u8 i, j;
@@ -1374,6 +1374,7 @@ static void b43_nphy_gain_ctrl_workarounds(struct b43_wldev *dev)
 static void b43_nphy_workarounds(struct b43_wldev *dev)
 {
        struct ssb_bus *bus = dev->sdev->bus;
+       struct ssb_sprom *sprom = dev->dev->bus_sprom;
        struct b43_phy *phy = &dev->phy;
        struct b43_phy_n *nphy = phy->n;
 
@@ -1443,9 +1444,9 @@ static void b43_nphy_workarounds(struct b43_wldev *dev)
 
                /* N PHY WAR TX Chain Update with hw_phytxchain as argument */
 
-               if ((bus->sprom.boardflags2_lo & B43_BFL2_APLL_WAR &&
+               if ((sprom->boardflags2_lo & B43_BFL2_APLL_WAR &&
                    b43_current_band(dev->wl) == IEEE80211_BAND_5GHZ) ||
-                   (bus->sprom.boardflags2_lo & B43_BFL2_GPLL_WAR &&
+                   (sprom->boardflags2_lo & B43_BFL2_GPLL_WAR &&
                    b43_current_band(dev->wl) == IEEE80211_BAND_2GHZ))
                        tmp32 = 0x00088888;
                else
@@ -1503,7 +1504,7 @@ static void b43_nphy_workarounds(struct b43_wldev *dev)
                b43_phy_write(dev, B43_NPHY_RFCTL_LUT_TRSW_LO2, 0x2D8);
                b43_phy_write(dev, B43_NPHY_RFCTL_LUT_TRSW_UP2, 0x301);
 
-               if (bus->sprom.boardflags2_lo & 0x100 &&
+               if (sprom->boardflags2_lo & 0x100 &&
                    bus->boardinfo.type == 0x8B) {
                        delays1[0] = 0x1;
                        delays1[5] = 0x14;
@@ -3587,6 +3588,7 @@ static void b43_nphy_set_rx_core_state(struct b43_wldev *dev, u8 mask)
 int b43_phy_initn(struct b43_wldev *dev)
 {
        struct ssb_bus *bus = dev->sdev->bus;
+       struct ssb_sprom *sprom = dev->dev->bus_sprom;
        struct b43_phy *phy = &dev->phy;
        struct b43_phy_n *nphy = phy->n;
        u8 tx_pwr_state;
@@ -3599,7 +3601,7 @@ int b43_phy_initn(struct b43_wldev *dev)
        bool do_cal = false;
 
        if ((dev->phy.rev >= 3) &&
-          (bus->sprom.boardflags_lo & B43_BFL_EXTLNA) &&
+          (sprom->boardflags_lo & B43_BFL_EXTLNA) &&
           (b43_current_band(dev->wl) == IEEE80211_BAND_2GHZ)) {
                chipco_set32(&dev->sdev->bus->chipco, SSB_CHIPCO_CHIPCTL, 0x40);
        }
@@ -3639,7 +3641,7 @@ int b43_phy_initn(struct b43_wldev *dev)
        b43_phy_write(dev, B43_NPHY_AFESEQ_TX2RX_PUD_20M, 0x20);
        b43_phy_write(dev, B43_NPHY_AFESEQ_TX2RX_PUD_40M, 0x20);
 
-       if (bus->sprom.boardflags2_lo & 0x100 ||
+       if (sprom->boardflags2_lo & 0x100 ||
            (bus->boardinfo.vendor == PCI_VENDOR_ID_APPLE &&
             bus->boardinfo.type == 0x8B))
                b43_phy_write(dev, B43_NPHY_TXREALFD, 0xA0);

diff --git a/drivers/net/wireless/b43/tables_lpphy.c b/drivers/net/wireless/b43/tables_lpphy.c
index 59df3c6..aa11755 100644 (file)
--- a/drivers/net/wireless/b43/tables_lpphy.c
+++ b/drivers/net/wireless/b43/tables_lpphy.c
@@ -2416,12 +2416,12 @@ void lpphy_write_gain_table_bulk(struct b43_wldev *dev, int offset, int count,
 
 void lpphy_init_tx_gain_table(struct b43_wldev *dev)
 {
-       struct ssb_bus *bus = dev->sdev->bus;
+       struct ssb_sprom *sprom = dev->dev->bus_sprom;
 
        switch (dev->phy.rev) {
        case 0:
-               if ((bus->sprom.boardflags_hi & B43_BFH_NOPA) ||
-                   (bus->sprom.boardflags_lo & B43_BFL_HGPA))
+               if ((sprom->boardflags_hi & B43_BFH_NOPA) ||
+                   (sprom->boardflags_lo & B43_BFL_HGPA))
                        lpphy_write_gain_table_bulk(dev, 0, 128,
                                        lpphy_rev0_nopa_tx_gain_table);
                else if (b43_current_band(dev->wl) == IEEE80211_BAND_2GHZ)
@@ -2432,8 +2432,8 @@ void lpphy_init_tx_gain_table(struct b43_wldev *dev)
                                        lpphy_rev0_5ghz_tx_gain_table);
                break;
        case 1:
-               if ((bus->sprom.boardflags_hi & B43_BFH_NOPA) ||
-                   (bus->sprom.boardflags_lo & B43_BFL_HGPA))
+               if ((sprom->boardflags_hi & B43_BFH_NOPA) ||
+                   (sprom->boardflags_lo & B43_BFL_HGPA))
                        lpphy_write_gain_table_bulk(dev, 0, 128,
                                        lpphy_rev1_nopa_tx_gain_table);
                else if (b43_current_band(dev->wl) == IEEE80211_BAND_2GHZ)
@@ -2444,7 +2444,7 @@ void lpphy_init_tx_gain_table(struct b43_wldev *dev)
                                        lpphy_rev1_5ghz_tx_gain_table);
                break;
        default:
-               if (bus->sprom.boardflags_hi & B43_BFH_NOPA)
+               if (sprom->boardflags_hi & B43_BFH_NOPA)
                        lpphy_write_gain_table_bulk(dev, 0, 128,
                                        lpphy_rev2_nopa_tx_gain_table);
                else if (b43_current_band(dev->wl) == IEEE80211_BAND_2GHZ)

diff --git a/drivers/net/wireless/b43/wa.c b/drivers/net/wireless/b43/wa.c
index 8f4db44..2829ee1 100644 (file)
--- a/drivers/net/wireless/b43/wa.c
+++ b/drivers/net/wireless/b43/wa.c
@@ -487,6 +487,7 @@ static void b43_wa_boards_a(struct b43_wldev *dev)
 static void b43_wa_boards_g(struct b43_wldev *dev)
 {
        struct ssb_bus *bus = dev->sdev->bus;
+       struct ssb_sprom *sprom = dev->dev->bus_sprom;
        struct b43_phy *phy = &dev->phy;
 
        if (bus->boardinfo.vendor != SSB_BOARDVENDOR_BCM ||
@@ -498,7 +499,7 @@ static void b43_wa_boards_g(struct b43_wldev *dev)
                } else {
                        b43_ofdmtab_write16(dev, B43_OFDMTAB_GAINX, 1, 0x0002);
                        b43_ofdmtab_write16(dev, B43_OFDMTAB_GAINX, 2, 0x0001);
-                       if ((bus->sprom.boardflags_lo & B43_BFL_EXTLNA) &&
+                       if ((sprom->boardflags_lo & B43_BFL_EXTLNA) &&
                            (phy->rev >= 7)) {
                                b43_phy_mask(dev, B43_PHY_EXTG(0x11), 0xF7FF);
                                b43_ofdmtab_write16(dev, B43_OFDMTAB_GAINX, 0x0020, 0x0001);
@@ -510,7 +511,7 @@ static void b43_wa_boards_g(struct b43_wldev *dev)
                        }
                }
        }
-       if (bus->sprom.boardflags_lo & B43_BFL_FEM) {
+       if (sprom->boardflags_lo & B43_BFL_FEM) {
                b43_phy_write(dev, B43_PHY_GTABCTL, 0x3120);
                b43_phy_write(dev, B43_PHY_GTABDATA, 0xC480);
        }

diff --git a/drivers/net/wireless/b43/xmit.c b/drivers/net/wireless/b43/xmit.c
index c8f99ae..488b898 100644 (file)
--- a/drivers/net/wireless/b43/xmit.c
+++ b/drivers/net/wireless/b43/xmit.c
@@ -547,7 +547,7 @@ static s8 b43_rssi_postprocess(struct b43_wldev *dev,
                        else
                                tmp -= 3;
                } else {
-                       if (dev->sdev->bus->sprom.
+                       if (dev->dev->bus_sprom->
                            boardflags_lo & B43_BFL_RSSI) {
                                if (in_rssi > 63)
                                        in_rssi = 63;