FMC: add a software mezzanine driver
authorAlessandro Rubini <rubini@gnudd.com>
Tue, 18 Jun 2013 21:47:46 +0000 (23:47 +0200)
committerGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Tue, 18 Jun 2013 22:41:04 +0000 (15:41 -0700)
This simple do-nothing mezzanine driver shows how to write a mezzanine
driver, that can also handle interrupts reported by the carrier.

Signed-off-by: Alessandro Rubini <rubini@gnudd.com>
Acked-by: Juan David Gonzalez Cobas <dcobas@cern.ch>
Acked-by: Emilio G. Cota <cota@braap.org>
Acked-by: Samuel Iglesias Gonsalvez <siglesias@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Documentation/fmc/00-INDEX
Documentation/fmc/fmc-trivial.txt [new file with mode: 0644]
drivers/fmc/Kconfig
drivers/fmc/Makefile
drivers/fmc/fmc-trivial.c [new file with mode: 0644]

index 34df5cf..c22d687 100644 (file)
@@ -27,3 +27,6 @@ identifiers.txt
 
 fmc-fakedev.txt
        - about drivers/fmc/fmc-fakedev.ko
+
+fmc-trivial.txt
+       - about drivers/fmc/fmc-trivial.ko
diff --git a/Documentation/fmc/fmc-trivial.txt b/Documentation/fmc/fmc-trivial.txt
new file mode 100644 (file)
index 0000000..d1910bc
--- /dev/null
@@ -0,0 +1,17 @@
+fmc-trivial
+===========
+
+The simple module fmc-trivial is just a simple client that registers an
+interrupt handler. I used it to verify the basic mechanism of the FMC
+bus and how interrupts worked.
+
+The module implements the generic FMC parameters, so it can program a
+different gateware file in each card. The whole list of parameters it
+accepts are:
+
+`busid='
+`gateware='
+     Generic parameters. See mezzanine.txt
+
+
+This driver is worth reading, in my opinion.
index 505e96b..7eacef9 100644 (file)
@@ -25,4 +25,11 @@ config FMC_FAKEDEV
          that can be rewritten at run time and usef for matching
          mezzanines.
 
+config FMC_TRIVIAL
+       tristate "FMC trivial mezzanine driver (software testing)"
+       help
+         This is a fake mezzanine driver, to show how FMC works and test it.
+         The driver also handles interrupts (we used it with a real carrier
+         before the mezzanines were produced)
+
 endif # FMC
index 9832b79..52624e6 100644 (file)
@@ -8,3 +8,4 @@ fmc-y += fru-parse.o
 fmc-y += fmc-dump.o
 
 obj-$(CONFIG_FMC_FAKEDEV) += fmc-fakedev.o
+obj-$(CONFIG_FMC_TRIVIAL) += fmc-trivial.o
diff --git a/drivers/fmc/fmc-trivial.c b/drivers/fmc/fmc-trivial.c
new file mode 100644 (file)
index 0000000..6c590f5
--- /dev/null
@@ -0,0 +1,107 @@
+/*
+ * Copyright (C) 2012 CERN (www.cern.ch)
+ * Author: Alessandro Rubini <rubini@gnudd.com>
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * The software is provided "as is"; the copyright holders disclaim
+ * all warranties and liabilities, to the extent permitted by
+ * applicable law.
+ */
+
+/* A trivial fmc driver that can load a gateware file and reports interrupts */
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/gpio.h>
+#include <linux/fmc.h>
+
+static struct fmc_driver t_drv; /* initialized later */
+
+static irqreturn_t t_handler(int irq, void *dev_id)
+{
+       struct fmc_device *fmc = dev_id;
+
+       fmc->op->irq_ack(fmc);
+       dev_info(&fmc->dev, "received irq %i\n", irq);
+       return IRQ_HANDLED;
+}
+
+static struct fmc_gpio t_gpio[] = {
+       {
+               .gpio = FMC_GPIO_IRQ(0),
+               .mode = GPIOF_DIR_IN,
+               .irqmode = IRQF_TRIGGER_RISING,
+       }, {
+               .gpio = FMC_GPIO_IRQ(1),
+               .mode = GPIOF_DIR_IN,
+               .irqmode = IRQF_TRIGGER_RISING,
+       }
+};
+
+static int t_probe(struct fmc_device *fmc)
+{
+       int ret;
+       int index = 0;
+
+       if (fmc->op->validate)
+               index = fmc->op->validate(fmc, &t_drv);
+       if (index < 0)
+               return -EINVAL; /* not our device: invalid */
+
+       ret = fmc->op->irq_request(fmc, t_handler, "fmc-trivial", IRQF_SHARED);
+       if (ret < 0)
+               return ret;
+       /* ignore error code of call below, we really don't care */
+       fmc->op->gpio_config(fmc, t_gpio, ARRAY_SIZE(t_gpio));
+
+       /* Reprogram, if asked to. ESRCH == no filename specified */
+       ret = -ESRCH;
+       if (fmc->op->reprogram)
+               ret = fmc->op->reprogram(fmc, &t_drv, "");
+       if (ret == -ESRCH)
+               ret = 0;
+       if (ret < 0)
+               fmc->op->irq_free(fmc);
+
+       /* FIXME: reprogram LM32 too */
+       return ret;
+}
+
+static int t_remove(struct fmc_device *fmc)
+{
+       fmc->op->irq_free(fmc);
+       return 0;
+}
+
+static struct fmc_driver t_drv = {
+       .version = FMC_VERSION,
+       .driver.name = KBUILD_MODNAME,
+       .probe = t_probe,
+       .remove = t_remove,
+       /* no table, as the current match just matches everything */
+};
+
+ /* We accept the generic parameters */
+FMC_PARAM_BUSID(t_drv);
+FMC_PARAM_GATEWARE(t_drv);
+
+static int t_init(void)
+{
+       int ret;
+
+       ret = fmc_driver_register(&t_drv);
+       return ret;
+}
+
+static void t_exit(void)
+{
+       fmc_driver_unregister(&t_drv);
+}
+
+module_init(t_init);
+module_exit(t_exit);
+
+MODULE_LICENSE("Dual BSD/GPL");