i2c: altera: Add Altera I2C Controller driver
authorThor Thayer <thor.thayer@linux.intel.com>
Mon, 11 Sep 2017 21:17:20 +0000 (16:17 -0500)
committerWolfram Sang <wsa@the-dreams.de>
Wed, 13 Sep 2017 21:37:16 +0000 (23:37 +0200)
Add driver support for the Altera I2C Controller. The I2C
controller is soft IP for use in FPGAs.

Signed-off-by: Thor Thayer <thor.thayer@linux.intel.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
MAINTAINERS
drivers/i2c/busses/Kconfig
drivers/i2c/busses/Makefile
drivers/i2c/busses/i2c-altera.c [new file with mode: 0644]

index 2093060..4b914dd 100644 (file)
@@ -644,6 +644,11 @@ ALPS PS/2 TOUCHPAD DRIVER
 R:     Pali Rohár <pali.rohar@gmail.com>
 F:     drivers/input/mouse/alps.*
 
+ALTERA I2C CONTROLLER DRIVER
+M:     Thor Thayer <thor.thayer@linux.intel.com>
+S:     Maintained
+F:     drivers/i2c/busses/i2c-altera.c
+
 ALTERA MAILBOX DRIVER
 M:     Ley Foon Tan <lftan@altera.com>
 L:     nios2-dev@lists.rocketboards.org (moderated for non-subscribers)
index edc0cfb..47165d7 100644 (file)
@@ -336,6 +336,16 @@ config I2C_POWERMAC
 
 comment "I2C system bus drivers (mostly embedded / system-on-chip)"
 
+config I2C_ALTERA
+       tristate "Altera Soft IP I2C"
+       depends on (ARCH_SOCFPGA || NIOS2) && OF
+       help
+         If you say yes to this option, support will be included for the
+         Altera Soft IP I2C interfaces on SoCFPGA and Nios2 architectures.
+
+         This driver can also be built as a module.  If so, the module
+         will be called i2c-altera.
+
 config I2C_ASPEED
        tristate "Aspeed I2C Controller"
        depends on ARCH_ASPEED || COMPILE_TEST
index 562daf7..a57812f 100644 (file)
@@ -30,6 +30,7 @@ obj-$(CONFIG_I2C_HYDRA)               += i2c-hydra.o
 obj-$(CONFIG_I2C_POWERMAC)     += i2c-powermac.o
 
 # Embedded system I2C/SMBus host controller drivers
+obj-$(CONFIG_I2C_ALTERA)       += i2c-altera.o
 obj-$(CONFIG_I2C_ASPEED)       += i2c-aspeed.o
 obj-$(CONFIG_I2C_AT91)         += i2c-at91.o
 obj-$(CONFIG_I2C_AU1550)       += i2c-au1550.o
diff --git a/drivers/i2c/busses/i2c-altera.c b/drivers/i2c/busses/i2c-altera.c
new file mode 100644 (file)
index 0000000..f5e1941
--- /dev/null
@@ -0,0 +1,511 @@
+/*
+ *  Copyright Intel Corporation (C) 2017.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ * Based on the i2c-axxia.c driver.
+ */
+#include <linux/clk.h>
+#include <linux/clkdev.h>
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/iopoll.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+
+#define ALTR_I2C_TFR_CMD       0x00    /* Transfer Command register */
+#define     ALTR_I2C_TFR_CMD_STA       BIT(9)  /* send START before byte */
+#define     ALTR_I2C_TFR_CMD_STO       BIT(8)  /* send STOP after byte */
+#define     ALTR_I2C_TFR_CMD_RW_D      BIT(0)  /* Direction of transfer */
+#define ALTR_I2C_RX_DATA       0x04    /* RX data FIFO register */
+#define ALTR_I2C_CTRL          0x08    /* Control register */
+#define     ALTR_I2C_CTRL_RXT_SHFT     4       /* RX FIFO Threshold */
+#define     ALTR_I2C_CTRL_TCT_SHFT     2       /* TFER CMD FIFO Threshold */
+#define     ALTR_I2C_CTRL_BSPEED       BIT(1)  /* Bus Speed (1=Fast) */
+#define     ALTR_I2C_CTRL_EN   BIT(0)  /* Enable Core (1=Enable) */
+#define ALTR_I2C_ISER          0x0C    /* Interrupt Status Enable register */
+#define     ALTR_I2C_ISER_RXOF_EN      BIT(4)  /* Enable RX OVERFLOW IRQ */
+#define     ALTR_I2C_ISER_ARB_EN       BIT(3)  /* Enable ARB LOST IRQ */
+#define     ALTR_I2C_ISER_NACK_EN      BIT(2)  /* Enable NACK DET IRQ */
+#define     ALTR_I2C_ISER_RXRDY_EN     BIT(1)  /* Enable RX Ready IRQ */
+#define     ALTR_I2C_ISER_TXRDY_EN     BIT(0)  /* Enable TX Ready IRQ */
+#define ALTR_I2C_ISR           0x10    /* Interrupt Status register */
+#define     ALTR_I2C_ISR_RXOF          BIT(4)  /* RX OVERFLOW IRQ */
+#define     ALTR_I2C_ISR_ARB           BIT(3)  /* ARB LOST IRQ */
+#define     ALTR_I2C_ISR_NACK          BIT(2)  /* NACK DET IRQ */
+#define     ALTR_I2C_ISR_RXRDY         BIT(1)  /* RX Ready IRQ */
+#define     ALTR_I2C_ISR_TXRDY         BIT(0)  /* TX Ready IRQ */
+#define ALTR_I2C_STATUS                0x14    /* Status register */
+#define     ALTR_I2C_STAT_CORE         BIT(0)  /* Core Status (0=idle) */
+#define ALTR_I2C_TC_FIFO_LVL   0x18    /* Transfer FIFO LVL register */
+#define ALTR_I2C_RX_FIFO_LVL   0x1C    /* Receive FIFO LVL register */
+#define ALTR_I2C_SCL_LOW       0x20    /* SCL low count register */
+#define ALTR_I2C_SCL_HIGH      0x24    /* SCL high count register */
+#define ALTR_I2C_SDA_HOLD      0x28    /* SDA hold count register */
+
+#define ALTR_I2C_ALL_IRQ       (ALTR_I2C_ISR_RXOF | ALTR_I2C_ISR_ARB | \
+                                ALTR_I2C_ISR_NACK | ALTR_I2C_ISR_RXRDY | \
+                                ALTR_I2C_ISR_TXRDY)
+
+#define ALTR_I2C_THRESHOLD     0       /* IRQ Threshold at 1 element */
+#define ALTR_I2C_DFLT_FIFO_SZ  4
+#define ALTR_I2C_TIMEOUT       100000  /* 100ms */
+#define ALTR_I2C_XFER_TIMEOUT  (msecs_to_jiffies(250))
+
+/**
+ * altr_i2c_dev - I2C device context
+ * @base: pointer to register struct
+ * @msg: pointer to current message
+ * @msg_len: number of bytes transferred in msg
+ * @msg_err: error code for completed message
+ * @msg_complete: xfer completion object
+ * @dev: device reference
+ * @adapter: core i2c abstraction
+ * @i2c_clk: clock reference for i2c input clock
+ * @bus_clk_rate: current i2c bus clock rate
+ * @buf: ptr to msg buffer for easier use.
+ * @fifo_size: size of the FIFO passed in.
+ * @isr_mask: cached copy of local ISR enables.
+ * @isr_status: cached copy of local ISR status.
+ * @lock: spinlock for IRQ synchronization.
+ */
+struct altr_i2c_dev {
+       void __iomem *base;
+       struct i2c_msg *msg;
+       size_t msg_len;
+       int msg_err;
+       struct completion msg_complete;
+       struct device *dev;
+       struct i2c_adapter adapter;
+       struct clk *i2c_clk;
+       u32 bus_clk_rate;
+       u8 *buf;
+       u32 fifo_size;
+       u32 isr_mask;
+       u32 isr_status;
+       spinlock_t lock;        /* IRQ synchronization */
+};
+
+static void
+altr_i2c_int_enable(struct altr_i2c_dev *idev, u32 mask, bool enable)
+{
+       unsigned long flags;
+       u32 int_en;
+
+       spin_lock_irqsave(&idev->lock, flags);
+
+       int_en = readl(idev->base + ALTR_I2C_ISER);
+       if (enable)
+               idev->isr_mask = int_en | mask;
+       else
+               idev->isr_mask = int_en & ~mask;
+
+       writel(idev->isr_mask, idev->base + ALTR_I2C_ISER);
+
+       spin_unlock_irqrestore(&idev->lock, flags);
+}
+
+static void altr_i2c_int_clear(struct altr_i2c_dev *idev, u32 mask)
+{
+       u32 int_en = readl(idev->base + ALTR_I2C_ISR);
+
+       writel(int_en | mask, idev->base + ALTR_I2C_ISR);
+}
+
+static void altr_i2c_core_disable(struct altr_i2c_dev *idev)
+{
+       u32 tmp = readl(idev->base + ALTR_I2C_CTRL);
+
+       writel(tmp & ~ALTR_I2C_CTRL_EN, idev->base + ALTR_I2C_CTRL);
+}
+
+static void altr_i2c_core_enable(struct altr_i2c_dev *idev)
+{
+       u32 tmp = readl(idev->base + ALTR_I2C_CTRL);
+
+       writel(tmp | ALTR_I2C_CTRL_EN, idev->base + ALTR_I2C_CTRL);
+}
+
+static void altr_i2c_reset(struct altr_i2c_dev *idev)
+{
+       altr_i2c_core_disable(idev);
+       altr_i2c_core_enable(idev);
+}
+
+static inline void altr_i2c_stop(struct altr_i2c_dev *idev)
+{
+       writel(ALTR_I2C_TFR_CMD_STO, idev->base + ALTR_I2C_TFR_CMD);
+}
+
+static void altr_i2c_init(struct altr_i2c_dev *idev)
+{
+       u32 divisor = clk_get_rate(idev->i2c_clk) / idev->bus_clk_rate;
+       u32 clk_mhz = clk_get_rate(idev->i2c_clk) / 1000000;
+       u32 tmp = (ALTR_I2C_THRESHOLD << ALTR_I2C_CTRL_RXT_SHFT) |
+                 (ALTR_I2C_THRESHOLD << ALTR_I2C_CTRL_TCT_SHFT);
+       u32 t_high, t_low;
+
+       if (idev->bus_clk_rate <= 100000) {
+               tmp &= ~ALTR_I2C_CTRL_BSPEED;
+               /* Standard mode SCL 50/50 */
+               t_high = divisor * 1 / 2;
+               t_low = divisor * 1 / 2;
+       } else {
+               tmp |= ALTR_I2C_CTRL_BSPEED;
+               /* Fast mode SCL 33/66 */
+               t_high = divisor * 1 / 3;
+               t_low = divisor * 2 / 3;
+       }
+       writel(tmp, idev->base + ALTR_I2C_CTRL);
+
+       dev_dbg(idev->dev, "rate=%uHz per_clk=%uMHz -> ratio=1:%u\n",
+               idev->bus_clk_rate, clk_mhz, divisor);
+
+       /* Reset controller */
+       altr_i2c_reset(idev);
+
+       /* SCL High Time */
+       writel(t_high, idev->base + ALTR_I2C_SCL_HIGH);
+       /* SCL Low Time */
+       writel(t_low, idev->base + ALTR_I2C_SCL_LOW);
+       /* SDA Hold Time, 300ns */
+       writel(div_u64(300 * clk_mhz, 1000), idev->base + ALTR_I2C_SDA_HOLD);
+
+       /* Mask all master interrupt bits */
+       altr_i2c_int_enable(idev, ALTR_I2C_ALL_IRQ, false);
+}
+
+/**
+ * altr_i2c_transfer - On the last byte to be transmitted, send
+ * a Stop bit on the last byte.
+ */
+static void altr_i2c_transfer(struct altr_i2c_dev *idev, u32 data)
+{
+       /* On the last byte to be transmitted, send STOP */
+       if (idev->msg_len == 1)
+               data |= ALTR_I2C_TFR_CMD_STO;
+       if (idev->msg_len > 0)
+               writel(data, idev->base + ALTR_I2C_TFR_CMD);
+}
+
+/**
+ * altr_i2c_empty_rx_fifo - Fetch data from RX FIFO until end of
+ * transfer. Send a Stop bit on the last byte.
+ */
+static void altr_i2c_empty_rx_fifo(struct altr_i2c_dev *idev)
+{
+       size_t rx_fifo_avail = readl(idev->base + ALTR_I2C_RX_FIFO_LVL);
+       int bytes_to_transfer = min(rx_fifo_avail, idev->msg_len);
+
+       while (bytes_to_transfer-- > 0) {
+               *idev->buf++ = readl(idev->base + ALTR_I2C_RX_DATA);
+               idev->msg_len--;
+               altr_i2c_transfer(idev, 0);
+       }
+}
+
+/**
+ * altr_i2c_fill_tx_fifo - Fill TX FIFO from current message buffer.
+ * @return: Number of bytes left to transfer.
+ */
+static int altr_i2c_fill_tx_fifo(struct altr_i2c_dev *idev)
+{
+       size_t tx_fifo_avail = idev->fifo_size - readl(idev->base +
+                                                      ALTR_I2C_TC_FIFO_LVL);
+       int bytes_to_transfer = min(tx_fifo_avail, idev->msg_len);
+       int ret = idev->msg_len - bytes_to_transfer;
+
+       while (bytes_to_transfer-- > 0) {
+               altr_i2c_transfer(idev, *idev->buf++);
+               idev->msg_len--;
+       }
+
+       return ret;
+}
+
+static irqreturn_t altr_i2c_isr_quick(int irq, void *_dev)
+{
+       struct altr_i2c_dev *idev = _dev;
+       irqreturn_t ret = IRQ_HANDLED;
+
+       /* Read IRQ status but only interested in Enabled IRQs. */
+       idev->isr_status = readl(idev->base + ALTR_I2C_ISR) & idev->isr_mask;
+       if (idev->isr_status)
+               ret = IRQ_WAKE_THREAD;
+
+       return ret;
+}
+
+static irqreturn_t altr_i2c_isr(int irq, void *_dev)
+{
+       int ret;
+       bool read, finish = false;
+       struct altr_i2c_dev *idev = _dev;
+       u32 status = idev->isr_status;
+
+       if (!idev->msg) {
+               dev_warn(idev->dev, "unexpected interrupt\n");
+               altr_i2c_int_clear(idev, ALTR_I2C_ALL_IRQ);
+               return IRQ_HANDLED;
+       }
+       read = (idev->msg->flags & I2C_M_RD) != 0;
+
+       /* handle Lost Arbitration */
+       if (unlikely(status & ALTR_I2C_ISR_ARB)) {
+               altr_i2c_int_clear(idev, ALTR_I2C_ISR_ARB);
+               idev->msg_err = -EAGAIN;
+               finish = true;
+       } else if (unlikely(status & ALTR_I2C_ISR_NACK)) {
+               dev_dbg(idev->dev, "Could not get ACK\n");
+               idev->msg_err = -ENXIO;
+               altr_i2c_int_clear(idev, ALTR_I2C_ISR_NACK);
+               altr_i2c_stop(idev);
+               finish = true;
+       } else if (read && unlikely(status & ALTR_I2C_ISR_RXOF)) {
+               /* handle RX FIFO Overflow */
+               altr_i2c_empty_rx_fifo(idev);
+               altr_i2c_int_clear(idev, ALTR_I2C_ISR_RXRDY);
+               altr_i2c_stop(idev);
+               dev_err(idev->dev, "RX FIFO Overflow\n");
+               finish = true;
+       } else if (read && (status & ALTR_I2C_ISR_RXRDY)) {
+               /* RX FIFO needs service? */
+               altr_i2c_empty_rx_fifo(idev);
+               altr_i2c_int_clear(idev, ALTR_I2C_ISR_RXRDY);
+               if (!idev->msg_len)
+                       finish = true;
+       } else if (!read && (status & ALTR_I2C_ISR_TXRDY)) {
+               /* TX FIFO needs service? */
+               altr_i2c_int_clear(idev, ALTR_I2C_ISR_TXRDY);
+               if (idev->msg_len > 0)
+                       altr_i2c_fill_tx_fifo(idev);
+               else
+                       finish = true;
+       } else {
+               dev_warn(idev->dev, "Unexpected interrupt: 0x%x\n", status);
+               altr_i2c_int_clear(idev, ALTR_I2C_ALL_IRQ);
+       }
+
+       if (finish) {
+               /* Wait for the Core to finish */
+               ret = readl_poll_timeout_atomic(idev->base + ALTR_I2C_STATUS,
+                                               status,
+                                               !(status & ALTR_I2C_STAT_CORE),
+                                               1, ALTR_I2C_TIMEOUT);
+               if (ret)
+                       dev_err(idev->dev, "message timeout\n");
+               altr_i2c_int_enable(idev, ALTR_I2C_ALL_IRQ, false);
+               altr_i2c_int_clear(idev, ALTR_I2C_ALL_IRQ);
+               complete(&idev->msg_complete);
+               dev_dbg(idev->dev, "Message Complete\n");
+       }
+
+       return IRQ_HANDLED;
+}
+
+static int altr_i2c_xfer_msg(struct altr_i2c_dev *idev, struct i2c_msg *msg)
+{
+       u32 imask = ALTR_I2C_ISR_RXOF | ALTR_I2C_ISR_ARB | ALTR_I2C_ISR_NACK;
+       unsigned long time_left;
+       u32 value;
+       u8 addr = i2c_8bit_addr_from_msg(msg);
+
+       idev->msg = msg;
+       idev->msg_len = msg->len;
+       idev->buf = msg->buf;
+       idev->msg_err = 0;
+       reinit_completion(&idev->msg_complete);
+       altr_i2c_core_enable(idev);
+
+       /* Make sure RX FIFO is empty */
+       do {
+               readl(idev->base + ALTR_I2C_RX_DATA);
+       } while (readl(idev->base + ALTR_I2C_RX_FIFO_LVL));
+
+       writel(ALTR_I2C_TFR_CMD_STA | addr, idev->base + ALTR_I2C_TFR_CMD);
+
+       if ((msg->flags & I2C_M_RD) != 0) {
+               imask |= ALTR_I2C_ISER_RXOF_EN | ALTR_I2C_ISER_RXRDY_EN;
+               altr_i2c_int_enable(idev, imask, true);
+               /* write the first byte to start the RX */
+               altr_i2c_transfer(idev, 0);
+       } else {
+               imask |= ALTR_I2C_ISR_TXRDY;
+               altr_i2c_int_enable(idev, imask, true);
+               altr_i2c_fill_tx_fifo(idev);
+       }
+
+       time_left = wait_for_completion_timeout(&idev->msg_complete,
+                                               ALTR_I2C_XFER_TIMEOUT);
+       altr_i2c_int_enable(idev, imask, false);
+
+       value = readl(idev->base + ALTR_I2C_STATUS) & ALTR_I2C_STAT_CORE;
+       if (value)
+               dev_err(idev->dev, "Core Status not IDLE...\n");
+
+       if (time_left == 0) {
+               idev->msg_err = -ETIMEDOUT;
+               dev_dbg(idev->dev, "Transaction timed out.\n");
+       }
+
+       altr_i2c_core_disable(idev);
+
+       return idev->msg_err;
+}
+
+static int
+altr_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num)
+{
+       struct altr_i2c_dev *idev = i2c_get_adapdata(adap);
+       int i, ret;
+
+       for (i = 0; i < num; i++) {
+               ret = altr_i2c_xfer_msg(idev, msgs++);
+               if (ret)
+                       return ret;
+       }
+       return num;
+}
+
+static u32 altr_i2c_func(struct i2c_adapter *adap)
+{
+       return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
+}
+
+static const struct i2c_algorithm altr_i2c_algo = {
+       .master_xfer = altr_i2c_xfer,
+       .functionality = altr_i2c_func,
+};
+
+static int altr_i2c_probe(struct platform_device *pdev)
+{
+       struct altr_i2c_dev *idev = NULL;
+       struct resource *res;
+       int irq, ret;
+       u32 val;
+
+       idev = devm_kzalloc(&pdev->dev, sizeof(*idev), GFP_KERNEL);
+       if (!idev)
+               return -ENOMEM;
+
+       res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+       idev->base = devm_ioremap_resource(&pdev->dev, res);
+       if (IS_ERR(idev->base))
+               return PTR_ERR(idev->base);
+
+       irq = platform_get_irq(pdev, 0);
+       if (irq < 0) {
+               dev_err(&pdev->dev, "missing interrupt resource\n");
+               return irq;
+       }
+
+       idev->i2c_clk = devm_clk_get(&pdev->dev, NULL);
+       if (IS_ERR(idev->i2c_clk)) {
+               dev_err(&pdev->dev, "missing clock\n");
+               return PTR_ERR(idev->i2c_clk);
+       }
+
+       idev->dev = &pdev->dev;
+       init_completion(&idev->msg_complete);
+       spin_lock_init(&idev->lock);
+
+       val = device_property_read_u32(idev->dev, "fifo-size",
+                                      &idev->fifo_size);
+       if (val) {
+               dev_err(&pdev->dev, "FIFO size set to default of %d\n",
+                       ALTR_I2C_DFLT_FIFO_SZ);
+               idev->fifo_size = ALTR_I2C_DFLT_FIFO_SZ;
+       }
+
+       val = device_property_read_u32(idev->dev, "clock-frequency",
+                                      &idev->bus_clk_rate);
+       if (val) {
+               dev_err(&pdev->dev, "Default to 100kHz\n");
+               idev->bus_clk_rate = 100000;    /* default clock rate */
+       }
+
+       if (idev->bus_clk_rate > 400000) {
+               dev_err(&pdev->dev, "invalid clock-frequency %d\n",
+                       idev->bus_clk_rate);
+               return -EINVAL;
+       }
+
+       ret = devm_request_threaded_irq(&pdev->dev, irq, altr_i2c_isr_quick,
+                                       altr_i2c_isr, IRQF_ONESHOT,
+                                       pdev->name, idev);
+       if (ret) {
+               dev_err(&pdev->dev, "failed to claim IRQ %d\n", irq);
+               return ret;
+       }
+
+       ret = clk_prepare_enable(idev->i2c_clk);
+       if (ret) {
+               dev_err(&pdev->dev, "failed to enable clock\n");
+               return ret;
+       }
+
+       altr_i2c_init(idev);
+
+       i2c_set_adapdata(&idev->adapter, idev);
+       strlcpy(idev->adapter.name, pdev->name, sizeof(idev->adapter.name));
+       idev->adapter.owner = THIS_MODULE;
+       idev->adapter.algo = &altr_i2c_algo;
+       idev->adapter.dev.parent = &pdev->dev;
+       idev->adapter.dev.of_node = pdev->dev.of_node;
+
+       platform_set_drvdata(pdev, idev);
+
+       ret = i2c_add_adapter(&idev->adapter);
+       if (ret) {
+               clk_disable_unprepare(idev->i2c_clk);
+               return ret;
+       }
+       dev_info(&pdev->dev, "Altera SoftIP I2C Probe Complete\n");
+
+       return 0;
+}
+
+static int altr_i2c_remove(struct platform_device *pdev)
+{
+       struct altr_i2c_dev *idev = platform_get_drvdata(pdev);
+
+       clk_disable_unprepare(idev->i2c_clk);
+       i2c_del_adapter(&idev->adapter);
+
+       return 0;
+}
+
+/* Match table for of_platform binding */
+static const struct of_device_id altr_i2c_of_match[] = {
+       { .compatible = "altr,softip-i2c-v1.0" },
+       {},
+};
+MODULE_DEVICE_TABLE(of, altr_i2c_of_match);
+
+static struct platform_driver altr_i2c_driver = {
+       .probe = altr_i2c_probe,
+       .remove = altr_i2c_remove,
+       .driver = {
+               .name = "altera-i2c",
+               .of_match_table = altr_i2c_of_match,
+       },
+};
+
+module_platform_driver(altr_i2c_driver);
+
+MODULE_DESCRIPTION("Altera Soft IP I2C bus driver");
+MODULE_AUTHOR("Thor Thayer <thor.thayer@linux.intel.com>");
+MODULE_LICENSE("GPL v2");