+=== release 1.13.90 ===
+
+2018-03-03 23:00:59 +0000 Tim-Philipp Müller <tim@centricular.com>
+
+ * NEWS:
+ * RELEASE:
+ * configure.ac:
+ * gst-omx.doap:
+ * meson.build:
+ Release 1.13.90
+
+2018-03-03 20:21:06 +0000 Tim-Philipp Müller <tim@centricular.com>
+
+ * config/Makefile.am:
+ config: dist tizonia config files
+
+2018-03-02 11:06:08 -0500 Nicolas Dufresne <nicolas.dufresne@collabora.com>
+
+ * omx/gstomx.c:
+ Revert "omx: wait for flush complete and buffers being released when flushing"
+ This reverts commit 4211e4c29a262f110cb92ddf9c06b403ced233ef.
+
+2018-02-21 12:50:42 +0100 Guillaume Desmottes <guillaume.desmottes@collabora.co.uk>
+
+ * omx/gstomxvideoenc.c:
+ videoenc: don't set stride padding to 0 when copying frames
+ Padding can be left undefined there is no point filling it with 0.
+ https://bugzilla.gnome.org/show_bug.cgi?id=793694
+
+2018-02-16 11:50:35 +0100 Guillaume Desmottes <guillaume.desmottes@collabora.co.uk>
+
+ * omx/gstomxbufferpool.c:
+ * omx/gstomxh264enc.c:
+ * omx/gstomxh265enc.c:
+ * omx/gstomxvideo.c:
+ * omx/gstomxvideodec.c:
+ * omx/gstomxvideoenc.c:
+ add support for NV12_10LE32 and NV16_10LE32 on zynqultrascaleplus
+ The encoder and decoder on zynqultrascaleplus support these new 10 bits
+ format.
+ https://bugzilla.gnome.org/show_bug.cgi?id=793694
+
+2018-02-16 11:46:47 +0100 Guillaume Desmottes <guillaume.desmottes@collabora.co.uk>
+
+ * omx/gstomxvideoenc.c:
+ omxvideoenc: factor out gst_omx_video_enc_nv12_manual_copy()
+ No semantic change, I'm going to re-use it to copy the NV12_10LE32
+ format.
+ https://bugzilla.gnome.org/show_bug.cgi?id=793694
+
+2018-01-17 10:40:49 +0100 Guillaume Desmottes <guillaume.desmottes@collabora.co.uk>
+
+ * omx/gstomxvideoenc.c:
+ omxvideoenc: display the computed buffer size when configuring input
+ https://bugzilla.gnome.org/show_bug.cgi?id=793694
+
+2018-02-06 14:25:57 +0100 Guillaume Desmottes <guillaume.desmottes@collabora.co.uk>
+
+ * omx/gstomxvideoenc.c:
+ * omx/gstomxvideoenc.h:
+ videoenc: implement ROI on zynqultrascaleplus
+ Check input buffers for ROI meta and pass them to the encoder by using
+ zynqultrascaleplus's custom OMX extension. Also add a new
+ "default-roi-quality" in order to tell the encoder what quality level
+ should be applied to ROI by default.
+ https://bugzilla.gnome.org/show_bug.cgi?id=793696
+
+2018-02-14 17:23:39 +0100 Guillaume Desmottes <guillaume.desmottes@collabora.co.uk>
+
+ * omx/gstomxvideoenc.c:
+ omxvideoenc: remove GST_PARAM_MUTABLE_PLAYING from 'max-bitrate' property
+ This property isn't actually mutable in the PLAYING state.
+ https://bugzilla.gnome.org/show_bug.cgi?id=793458
+
+2018-02-14 17:20:02 +0100 Guillaume Desmottes <guillaume.desmottes@collabora.co.uk>
+
+ * omx/gstomxvideoenc.c:
+ * omx/gstomxvideoenc.h:
+ omxvideoenc: protect target_bitrate with the object lock
+ The 'target-bitrate' property can be changed while PLAYING
+ (GST_PARAM_MUTABLE_PLAYING). Make it thread-safe to prevent concurrent
+ accesses between the application and streaming thread.
+ https://bugzilla.gnome.org/show_bug.cgi?id=793458
+
+2018-02-20 11:46:49 +0100 Guillaume Desmottes <guillaume.desmottes@collabora.co.uk>
+
+ * omx/gstomxbufferpool.c:
+ omxbufferpool: add PERFORMANCE DEBUG message when copying output frames
+ I spent quiet some time figuring out why performance of my pipeline were
+ terrible. Turned out it was because of output frames being copied
+ because of stride/offset mismatch.
+ Add a PERFORMANCE DEBUG message to make it easier to spot and debug from logs.
+ https://bugzilla.gnome.org/show_bug.cgi?id=793637
+
+2018-02-15 19:44:37 +0000 Tim-Philipp Müller <tim@centricular.com>
+
+ * configure.ac:
+ * meson.build:
+ Back to development
+
+=== release 1.13.1 ===
+
+2018-02-15 17:50:14 +0000 Tim-Philipp Müller <tim@centricular.com>
+
+ * Makefile.am:
+ * NEWS:
+ * configure.ac:
+ * gst-omx.doap:
+ * meson.build:
+ Release 1.13.1
+
+2017-06-30 15:15:06 +0200 Guillaume Desmottes <guillaume.desmottes@collabora.co.uk>
+
+ * omx/gstomxh265enc.c:
+ omxh265enc: fix typo in "periodicty-idr" property name
+ Also fix the 'nick' of the property.
+ omxh265enc is based on the code from omxh264enc and suffers the same
+ typo as we fixed in https://bugzilla.gnome.org/show_bug.cgi?id=784370
+ This element isn't part of a stable release yet so it's not an API
+ break.
+ https://bugzilla.gnome.org/show_bug.cgi?id=793390
+
+2018-02-08 19:18:59 +0000 Tim-Philipp Müller <tim@centricular.com>
+
+ * meson.build:
+ meson: make version numbers ints and fix int/string comparison
+ WARNING: Trying to compare values of different types (str, int).
+ The result of this is undefined and will become a hard error
+ in a future Meson release.
+ Also remove unused libversion/soversion.
+
+2017-12-12 16:50:00 +0100 Guillaume Desmottes <guillaume.desmottes@collabora.co.uk>
+
+ * configure.ac:
+ * meson.build:
+ * omx/gstomx.h:
+ include all OMX extension headers if present
+ The OMX specs defines 8 headers that implementations can use to define
+ their custom extensions. We were checking and including 3 and ignoring
+ the other ones.
+ https://bugzilla.gnome.org/show_bug.cgi?id=792043
+
+2018-01-30 10:31:03 +0100 Guillaume Desmottes <guillaume.desmottes@collabora.co.uk>
+
+ * meson.build:
+ * omx/meson.build:
+ * tools/meson.build:
+ meson: simplify OMX extensions detection
+ We are now always checking which files are present or not, even when using our
+ internal copy of OMX, rather than hardcoding the ones present in it.
+ https://bugzilla.gnome.org/show_bug.cgi?id=792043
+
+2018-01-30 11:54:24 +0000 Nicolas Dufresne <nicolas.dufresne@collabora.com>
+
+ * meson.build:
+ * omx/meson.build:
+ * tools/meson.build:
+ Revert "meson: use include_directories() with external OMX headers path"
+ This reverts commit 9d37a92a615e54e8ee12f8c65bcfe386ec9de2d0.
+
+2017-11-27 14:52:10 +0100 Guillaume Desmottes <guillaume.desmottes@collabora.co.uk>
+
+ * omx/gstomxh265enc.c:
+ * omx/gstomxh265enc.h:
+ omxh265enc: add some encoding properties
+ constrained-intra-prediction and loop-filter-mode.
+ Those map standard OMX settings.
+ https://bugzilla.gnome.org/show_bug.cgi?id=792528
+
+2017-11-23 15:54:15 +0100 Guillaume Desmottes <guillaume.desmottes@collabora.co.uk>
+
+ * omx/gstomxh264enc.c:
+ * omx/gstomxh264enc.h:
+ omxh264enc: add some encoding properties
+ entropy-mode, constrained-intra-prediction and loop-filter-mode.
+ Those map standard OMX settings.
+ https://bugzilla.gnome.org/show_bug.cgi?id=792528
+
+2017-06-08 12:31:21 +0200 Guillaume Desmottes <guillaume.desmottes@collabora.co.uk>
+
+ * omx/gstomxvideoenc.c:
+ * omx/gstomxvideoenc.h:
+ omxvideoenc: add zynqultrascaleplus specific properties
+ https://bugzilla.gnome.org/show_bug.cgi?id=792528
+
+2017-10-31 12:24:39 +0100 Guillaume Desmottes <guillaume.desmottes@collabora.co.uk>
+
+ * omx/gstomxvideoenc.c:
+ omxvideoenc: document unit of target-bitrate property
+ nTargetBitrate and nEncodeBitrate are defined in bits per second in the
+ OMX spec.
+ https://bugzilla.gnome.org/show_bug.cgi?id=792528
+
+2017-07-06 10:18:48 +0200 Guillaume Desmottes <guillaume.desmottes@collabora.co.uk>
+
+ * omx/gstomxvideodec.c:
+ * omx/gstomxvideodec.h:
+ omxvideodec: add internal-entropy-buffers property on zynqultrascaleplus
+ Custom property to control the number of internal buffers used in the
+ decoder to smooth out entropy decoding performance.
+ https://bugzilla.gnome.org/show_bug.cgi?id=792528
+
+2018-01-30 10:31:03 +0100 Guillaume Desmottes <guillaume.desmottes@collabora.co.uk>
+
+ * meson.build:
+ * omx/meson.build:
+ * tools/meson.build:
+ meson: use include_directories() with external OMX headers path
+ It seems cleaner to use the proper meson tools to include this path
+ rather than manually tweak the build flags.
+ This also allows us to simplify the OMX extensions detection code. We
+ are now always checking which files are present, even when using our
+ internal copy of OMX, rather than hardcoding the ones present in it.
+ https://bugzilla.gnome.org/show_bug.cgi?id=792043
+
+2017-11-07 15:09:35 +0100 Guillaume Desmottes <guillaume.desmottes@collabora.co.uk>
+
+ * omx/gstomxvideoenc.c:
+ omxvideoenc: expose chroma format and bit depth in output caps
+ As we added in the parser (bgo#792039) expose the chroma and bit
+ depth information in output caps.
+ https://bugzilla.gnome.org/show_bug.cgi?id=792040
+
+2017-11-07 14:30:45 +0100 Guillaume Desmottes <guillaume.desmottes@collabora.co.uk>
+
+ * omx/gstomxvideoenc.c:
+ omxvideoenc: factor out get_output_caps()
+ No semantic change so far.
+ https://bugzilla.gnome.org/show_bug.cgi?id=792040
+
+2017-12-29 11:59:36 +0100 Guillaume Desmottes <guillaume.desmottes@collabora.co.uk>
+
+ * config/zynqultrascaleplus/gstomx.conf:
+ * omx/gstomx.c:
+ * omx/gstomx.h:
+ * omx/gstomxvideodec.c:
+ omxvideodec: add hack to pass color format from caps to OMX decoder
+ This hack tries to pass as much information as possible from caps to the
+ decoder before it receives any buffer. These information can be used by
+ the OMX decoder to, for example, pre-allocate its internal buffers
+ before starting to decode and so reduce its initial latency.
+ This mechanism is currently supported by the zynqultrascaleplus decoder.
+ https://bugzilla.gnome.org/show_bug.cgi?id=792040
+
+2017-12-01 12:43:19 +0100 Guillaume Desmottes <guillaume.desmottes@collabora.co.uk>
+
+ * omx/gstomx.c:
+ log failing OMX calls as errors
+ I find it confusing when debugging that OMX calls returning an error
+ where not logged as GST_LEVEL_ERROR making them harder to spot.
+ Fix this by introducing simple log macros checking the return value of
+ the OMX call and logging failures as errors.
+ https://bugzilla.gnome.org/show_bug.cgi?id=791069
+
+2017-10-30 11:59:19 +0100 Guillaume Desmottes <guillaume.desmottes@collabora.co.uk>
+
+ * omx/gstomx.c:
+ add OMX_PERFORMANCE debug category
+ Can be used to log buffers exchange between OMX and gst-omx to profile
+ performances of the OMX component.
+ Ideally this should be done using tracer hooks but it's currently not
+ possible to define custom hooks outside of core.
+ Use GST_DEBUG="OMX_PERFORMANCE:8" to enable it.
+ See also
+ https://github.com/gdesmott/gst-log-parser/blob/master/src/bin/omx-perf.rs
+ as a simple program consuming those logs to generate gnuplot files and
+ stats.
+ https://bugzilla.gnome.org/show_bug.cgi?id=791093
+
+2017-07-27 11:21:59 +0200 Guillaume Desmottes <guillaume.desmottes@collabora.co.uk>
+
+ * omx/gstomx.c:
+ * omx/gstomx.h:
+ * omx/gstomxvideoenc.c:
+ * omx/gstomxvideoenc.h:
+ omxvideoenc: implement dmabuf import on zynqultrascaleplus
+ The Zynq UltraScale+ encoder implements a custom OMX extension to
+ directly import dmabuf saving the need of mapping input buffers.
+ This can be use with either 'v4l2src io-mode=dmabuf' or an OMX video
+ decoder upstream.
+ https://bugzilla.gnome.org/show_bug.cgi?id=792361
+
+2017-09-22 16:02:40 +0200 Guillaume Desmottes <guillaume.desmottes@collabora.co.uk>
+
+ * omx/gstomxvideoenc.c:
+ omxvideoenc: drop late input frames if QoS is enabled
+ Make use of the new GstVideoEncoder QoS API to drop late input frames. This may
+ help a live pipeline to catch up if it's being late and all frames end up
+ being dropped at the sink.
+ https://bugzilla.gnome.org/show_bug.cgi?id=792783
+
+2018-01-19 15:18:23 +0530 Ashish Kumar <kr.ashish@samsung.com>
+
+ * examples/egl/testegl.c:
+ TestEgl: Removed redundant/unused code
+ https://bugzilla.gnome.org/show_bug.cgi?id=788550
+
+2018-01-03 16:07:18 +0100 Guillaume Desmottes <guillaume.desmottes@collabora.co.uk>
+
+ * omx/gstomxvideoenc.c:
+ omxvideoenc: early return in fill_buffer() if something goes wrong
+ If something goes wrong while trying to manually copy the input buffer,
+ the 'break' was moving us out of the 'for' loop but not out of the switch block.
+ So we ended up calling gst_video_frame_unmap() a second time (raising
+ assertions) and returning TRUE rather than FALSE.
+ Reproduced with a WIP zynqultrascaleplus OMX branch reporting wrong
+ buffer sizes and so triggering this bug.
+ https://bugzilla.gnome.org/show_bug.cgi?id=792167
+
+2017-12-19 16:09:41 +0000 Tim-Philipp Müller <tim@centricular.com>
+
+ * meson.build:
+ meson: gl: the winsys and platform list in the .pc file is space-separated
+
+2017-12-19 16:08:58 +0000 Tim-Philipp Müller <tim@centricular.com>
+
+ * meson.build:
+ meson: fix subproject fallback for gstreamer-gl-1.0
+ It's now in -base.
+
+2017-12-12 17:30:27 +0000 Julien Isorce <jisorce@oblong.com>
+
+ * omx/gstomxvideo.c:
+ * omx/gstomxvideo.h:
+ * omx/gstomxvideodec.c:
+ omxvideodec: ignore very little variations of the framerate
+ If less than 1%.
+ The dynamic format change should not happen when the
+ resolution does not change and when only the framerate
+ changes but very slightly, i.e. from 50000/1677=29.81
+ to 89/3=29.66 so a "percentage change" of less than 1%
+ (i.e. 100*(29.81-29.66)/29.66 = 0.50 < 1 ). In that case
+ just ignore it to avoid unnecessary renegotiation.
+ https://bugzilla.gnome.org/show_bug.cgi?id=759043
+
+2017-08-09 12:07:33 -0400 Guillaume Desmottes <guillaume.desmottes@collabora.co.uk>
+
+ * omx/gstomxvideodec.c:
+ * omx/gstomxvideodec.h:
+ omxvideodec: use dynamic buffer mode on input if possible
+ Prevent from copying the input buffers between GStreamer and OMX.
+ Tested on zynqultrascaleplus and rpi (without dynamic buffers).
+ https://bugzilla.gnome.org/show_bug.cgi?id=787093
+
+2017-07-20 16:35:31 +0200 Guillaume Desmottes <guillaume.desmottes@collabora.co.uk>
+
+ * omx/gstomxvideoenc.c:
+ * omx/gstomxvideoenc.h:
+ omxvideoenc: use dynamic buffer mode on input if possible
+ If the OMX component supports dynamic buffer mode and the input buffers
+ are properly aligned avoid copying each input frame between OMX and
+ GStreamer.
+ Tested on zynqultrascaleplus and rpi (without dynamic buffers).
+ https://bugzilla.gnome.org/show_bug.cgi?id=787093
+
+2017-07-20 12:56:37 +0200 Guillaume Desmottes <guillaume.desmottes@collabora.co.uk>
+
+ * omx/gstomxvideodec.c:
+ * omx/gstomxvideoenc.c:
+ omxvideoenc/dec: factor out input buffer allocation
+ No semantic change so far. I'm going to add an alternate way to allocate
+ input buffers.
+ https://bugzilla.gnome.org/show_bug.cgi?id=787093
+
+2017-07-20 16:31:54 +0200 Guillaume Desmottes <guillaume.desmottes@collabora.co.uk>
+
+ * omx/gstomx.c:
+ * omx/gstomx.h:
+ omx: add API to implement dynamic buffers support
+ OMX 1.2.0 introduced a third way to manage buffers by allowing
+ components to only allocate buffers header during their initialization
+ and change their pBuffer pointer at runtime.
+ This new feature can save us a copy between GStreamer and OMX for each
+ input buffer.
+ This patch adds API to allocate and use such buffers.
+ https://bugzilla.gnome.org/show_bug.cgi?id=787093
+
+2017-12-14 14:53:17 +1100 Matthew Waters <matthew@centricular.com>
+
+ * common:
+ Automatic update of common submodule
+ From e8c7a71 to 3fa2c9e
+
+2017-12-13 12:06:40 +0000 Julien Isorce <jisorce@oblong.com>
+
+ * omx/gstomxvideodec.c:
+ omxvideodec: consolidate the decision to try UseBuffer
+ The tee element can call gst_query_add_allocation_pool with pool as NULL.
+ Checking nth > 0 is not enough so we need to verify if there is a pool.
+ https://bugzilla.gnome.org/show_bug.cgi?id=730758
+ https://bugzilla.gnome.org/show_bug.cgi?id=784069
+
+2017-12-12 14:45:30 +0000 Julien Isorce <jisorce@oblong.com>
+
+ * omx/gstomxvideo.c:
+ * omx/gstomxvideo.h:
+ * omx/gstomxvideodec.c:
+ * omx/gstomxvideoenc.c:
+ gstomxvideodec: fix framerate overflow
+ Some live streams can set the framerate to 50000/1677 (=29.81).
+ GstVideoInfo.fps_n << 16 is wrong if the fps_n is 50000
+ (i.e. greater than 32767).
+ https://bugzilla.gnome.org/show_bug.cgi?id=759043
+
+2017-08-22 13:48:26 +0100 Julien Isorce <jisorce@oblong.com>
+
+ * configure.ac:
+ * examples/egl/Makefile.am:
+ * examples/egl/meson.build:
+ * examples/egl/testegl.c:
+ * meson.build:
+ example: port testegl.c to desktop
+ Will be easier to maintain.
+ Also uniformize autotool build with meson build which is
+ already retrieving the gl libs.
+ https://bugzilla.gnome.org/show_bug.cgi?id=781606
+
+2017-12-11 15:55:44 +0000 Julien Isorce <jisorce@oblong.com>
+
+ * meson.build:
+ meson: move omx features check after target selection
+ And uses gst_omx_args instead of add_global_arguments.
+ Similar to c69232852120d064c689caef07b3c68ad8fe6288
+ which was only for configure.ac
+ Useful to get omxvp8dec with meson too:
+ meson . buildtmp -D with_omx_target=tizonia
+ https://bugzilla.gnome.org/show_bug.cgi?id=782800
+
+2017-12-04 17:11:04 +0000 Julien Isorce <jisorce@oblong.com>
+
+ * config/tizonia/gstomx.conf.in:
+ config: add OMX.Aratelia.audio_decoder.aac to Tizonia config
+ Useful mostly for testing/debugging purpose as this is a software
+ based decoder (libfaad) for which GStreamer provides a direct
+ wrapper.
+ https://bugzilla.gnome.org/show_bug.cgi?id=791482
+
+2017-11-29 14:18:41 +0100 Guillaume Desmottes <guillaume.desmottes@collabora.co.uk>
+
+ * omx/gstomxvideodec.c:
+ omxvideodec: retrieve OMX_IndexParamVideoPortFormat before setting it
+ The usual pattern when setting OMX params is to first get the struct
+ param, override the values we want to set and then set the updated
+ param.
+ We were not doing this with OMX_IndexParamVideoPortFormat and so were
+ resetting some fields such as OMX_VIDEO_PARAM_PORTFORMATTYPE.xFramerate
+ https://bugzilla.gnome.org/show_bug.cgi?id=790979
+
+2017-05-21 17:34:51 +0100 Julien Isorce <jisorce@oblong.com>
+
+ * omx/gstomxaacenc.c:
+ omxaacenc: also set 'profile' if mpegversion is 4
+ Like done by gst_codec_utils_aac_caps_set_level_and_profile
+ which is called by avenc_aac, ffaac and voaacenc.
+ https://bugzilla.gnome.org/show_bug.cgi?id=735208
+
+2017-10-24 12:19:50 +0200 Guillaume Desmottes <guillaume.desmottes@collabora.co.uk>
+
+ * omx/gstomx.c:
+ omx: wait for flush complete and buffers being released when flushing
+ As stated in the existing comment, when flusing we should wait for OMX
+ to send the flush command complete event AND all ports being released.
+ We were stopping as soon as one of those condition was met.
+ Fix a race between FillThisBufferDone/EmptyBufferDone and the flush
+ EventCmdComplete messages. The OMX implementation is supposed to release
+ its buffers before posting the EventCmdComplete event but the ordering
+ isn't guaranteed as the FillThisBufferDone/EmptyBufferDone and
+ EventHandler callbacks can be called from different threads (cf 2.7
+ 'Thread Safety' in the spec).
+ https://bugzilla.gnome.org/show_bug.cgi?id=789475
+
+2017-10-24 11:45:20 +0200 Guillaume Desmottes <guillaume.desmottes@collabora.co.uk>
+
+ * omx/gstomx.c:
+ gst_omx_port_set_flushing: simplify waiting loop
+ No semantic change so far, I just made the 'while' end condition easier
+ to understand as a first step before changing it.
+ - move error/time out checks inside the loop to make it clearer on what
+ we are actually waiting for.
+ - group port->buffers checks together with parenthesis as they are part
+ of the same conceptual check: waiting for all buffers to be released.
+ https://bugzilla.gnome.org/show_bug.cgi?id=789475
+
+2017-11-27 20:17:17 +1100 Matthew Waters <matthew@centricular.com>
+
+ * common:
+ Automatic update of common submodule
+ From 3f4aa96 to e8c7a71
+
+2017-11-23 15:03:48 +0100 Guillaume Desmottes <guillaume.desmottes@collabora.co.uk>
+
+ * omx/gstomxh264enc.c:
+ * omx/gstomxh264utils.c:
+ zynqultrascaleplus: add support for extra AVC levels
+ The Zynqultrascaleplus has support for extra AVC levels not defined in
+ the OMX spec as a customer extension.
+ https://bugzilla.gnome.org/show_bug.cgi?id=790758
+
+2017-10-16 14:47:07 +0200 Guillaume Desmottes <guillaume.desmottes@collabora.co.uk>
+
+ * .gitignore:
+ * Makefile.am:
+ * config/meson.build:
+ * configure.ac:
+ * meson.build:
+ * tests/Makefile.am:
+ * tests/check/.gitignore:
+ * tests/check/Makefile.am:
+ * tests/check/generic/.gitignore:
+ * tests/check/generic/states.c:
+ * tests/check/meson.build:
+ * tests/meson.build:
+ add test support
+ Most of the boilerplate and the states test has been copied from
+ gst-plugins-good.
+ https://bugzilla.gnome.org/show_bug.cgi?id=789094
+
+2017-10-17 13:07:05 +0200 Guillaume Desmottes <guillaume.desmottes@collabora.co.uk>
+
+ * meson.build:
+ * tools/meson.build:
+ meson: add tools support
+ Looks like the tools directory was left out during the initial port to
+ meson.
+ https://bugzilla.gnome.org/show_bug.cgi?id=789090
+
+2017-10-16 14:24:50 +0200 Guillaume Desmottes <guillaume.desmottes@collabora.co.uk>
+
+ * omx/gstomx.c:
+ omx: fix build on rpi
+ The nTimeStamp field is a OMX_TICKS struct on the rpi so use the proper
+ macro to set it.
+ Fix build on the build which has been broken by
+ b3173144b7c1b12c9e1b7571f78659be45d813f6
+ https://bugzilla.gnome.org/show_bug.cgi?id=789052
+
+2017-10-17 12:11:04 +0200 Guillaume Desmottes <guillaume.desmottes@collabora.co.uk>
+
+ * configure.ac:
+ * meson.build:
+ check if Allegro headers are present when building zynqultrascaleplus
+ The Zynq UltraScale+ uses a custom version of OMX implementing several
+ 3rd party extensions. Make sure those are present when building this
+ target.
+ https://bugzilla.gnome.org/show_bug.cgi?id=788064
+
+2017-10-16 12:42:44 +0200 Guillaume Desmottes <guillaume.desmottes@collabora.co.uk>
+
+ * omx/gstomxvideodec.c:
+ omxvideodec: remove redundant debug message
+ We have already a debug message right after.
+ https://bugzilla.gnome.org/show_bug.cgi?id=789058
+
+2017-10-16 13:26:38 +0200 Guillaume Desmottes <guillaume.desmottes@collabora.co.uk>
+
+ * omx/gstomxh265enc.c:
+ * omx/gstomxh265utils.c:
+ omxh265: fix enum casting when using Allegro HEVC extensions
+ Allegro's HEVC implementation defines a superset of the profiles and
+ enums from the Android implementation.
+ Properly cast to fix -Wenum-conversion warnings from clang.
+ https://bugzilla.gnome.org/show_bug.cgi?id=789057
+
+2017-10-16 13:08:12 +0200 Guillaume Desmottes <guillaume.desmottes@collabora.co.uk>
+
+ * omx/gstomxh265enc.c:
+ * omx/gstomxvp8dec.c:
+ properly cast extension enums
+ OMX's allow 3rds party to define extensions using their own enums
+ (like OMX_VIDEO_CODINGEXTTYPE) and to be used as the general
+ ones (like OMX_VIDEO_CODINGTYPE).
+ Properly cast those to fix -Wenum-conversion warnings from some
+ compilers such as clang.
+ https://bugzilla.gnome.org/show_bug.cgi?id=789057
+
+2017-10-09 13:12:35 +0200 Guillaume Desmottes <guillaume.desmottes@collabora.co.uk>
+
+ * omx/gstomx.c:
+ omx: also reset nTimeStamp when re-using buffers
+ Some OMX implementations may check if the timestamp of the output buffers
+ they receive is actually not set.
+ https://bugzilla.gnome.org/show_bug.cgi?id=788711
+
+2017-10-04 17:11:55 +0200 Guillaume Desmottes <guillaume.desmottes@collabora.co.uk>
+
+ * omx/gstomx.c:
+ omx: factor out gst_omx_buffer_reset()
+ https://bugzilla.gnome.org/show_bug.cgi?id=788711
+
+2017-10-09 17:27:22 +0200 Guillaume Desmottes <guillaume.desmottes@collabora.co.uk>
+
+ * omx/gstomx.c:
+ * omx/gstomx.h:
+ * omx/gstomxvideodec.c:
+ * omx/gstomxvideoenc.c:
+ add gst_omx_buffer_flags_to_string()
+ Make debug logs more readable so users don't have to manually figure out
+ the meaning of flags.
+ https://bugzilla.gnome.org/show_bug.cgi?id=788767
+
+2017-09-27 19:47:29 +0530 Ponnam Srinivas <p.srinivas@samsung.com>
+
+ * omx/gstomxh263enc.c:
+ h263enc: fix caps leak in error code path
+ https://bugzilla.gnome.org/show_bug.cgi?id=788245
+
+2017-09-21 15:21:36 +0530 Ponnam Srinivas <p.srinivas@samsung.com>
+
+ * omx/gstomxh264enc.c:
+ omxh264enc: fix caps leak
+ https://bugzilla.gnome.org/show_bug.cgi?id=787711
+
+2017-09-21 11:36:46 +0530 Ponnam Srinivas <p.srinivas@samsung.com>
+
+ * omx/gstomxh265enc.c:
+ omxh265enc: fix caps leak
+ https://bugzilla.gnome.org/show_bug.cgi?id=787714
+
+2017-09-13 15:32:51 +0200 Guillaume Desmottes <guillaume.desmottes@collabora.co.uk>
+
+ * omx/gstomxvideodec.c:
+ omxvideodec: log info about frame before releasing it
+ gst_video_decoder_release_frame() takes ownership of the frame and will
+ destroy it. So we should no longer use it after calling it.
+ https://bugzilla.gnome.org/show_bug.cgi?id=787628
+
+2017-08-20 20:19:33 +0530 Gurkirpal Singh <gurkirpal204@gmail.com>
+
+ * configure.ac:
+ configure: Show tizonia target in help
+ https://bugzilla.gnome.org/show_bug.cgi?id=786544
+
+2017-07-12 14:35:10 +0200 Guillaume Desmottes <guillaume.desmottes@collabora.co.uk>
+
+ * config/zynqultrascaleplus/gstomx.conf:
+ * omx/Makefile.am:
+ * omx/gstomx.c:
+ * omx/gstomxh265dec.c:
+ * omx/gstomxh265dec.h:
+ * omx/meson.build:
+ omxh265dec: add H265 decoder
+ Add HEVC decoder for the zynqultrascaleplus platform.
+ I used the H264 decoder code as a template.
+ https://bugzilla.gnome.org/show_bug.cgi?id=785434
+
+2017-07-12 11:01:15 +0200 Guillaume Desmottes <guillaume.desmottes@collabora.co.uk>
+
+ * config/zynqultrascaleplus/gstomx.conf:
+ * configure.ac:
+ * meson.build:
+ * omx/Makefile.am:
+ * omx/gstomx.c:
+ * omx/gstomxh265enc.c:
+ * omx/gstomxh265enc.h:
+ * omx/gstomxh265utils.c:
+ * omx/gstomxh265utils.h:
+ * omx/meson.build:
+ omxh265enc: add H265 encoder
+ The OMX spec doesn't support HEVC but the OMX stack of the
+ zynqultrascaleplus adds it as a custom extension.
+ It uses the same API as the one of Android's OMX stack.
+ I used the H264 encoder code as a template.
+ https://bugzilla.gnome.org/show_bug.cgi?id=785434
+
+2017-08-28 13:56:22 +0200 Guillaume Desmottes <guillaume.desmottes@collabora.co.uk>
+
+ * omx/gstomxvideoenc.c:
+ omxvideoenc: use caps from query in propose_allocation
+ Prevent crash by not deferencing a NULL pointer if self->input_state
+ isn't defined when propose_allocation() is called.
+ https://bugzilla.gnome.org/show_bug.cgi?id=786442
+
+2017-09-04 09:34:03 +0200 Guillaume Desmottes <guillaume.desmottes@collabora.co.uk>
+
+ * omx/gstomx.c:
+ omx: display states as string if changing failed
+ Improve the error message by displaying the states in their string
+ representation rather than their numerical value.
+ https://bugzilla.gnome.org/show_bug.cgi?id=787235
+
+2017-08-22 10:22:45 +0100 Julien Isorce <jisorce@oblong.com>
+
+ * omx/gstomxvideodec.c:
+ omxvideodec: EGLDisplay is not indirectly defined by gstgl headers inclusion
+ Just use gpointer as done in GstGL to not include
+ EGL/egl.h just for EGLDisplay.
+ https://bugzilla.gnome.org/show_bug.cgi?id=784779
+
+2017-07-14 16:34:04 +0530 Gurkirpal Singh <gurkirpal204@gmail.com>
+
+ * config/tizonia/gstomx.conf.in:
+ config: expose OMX.mesa h264 decoder and encoder in Tizonia config
+ https://bugzilla.gnome.org/show_bug.cgi?id=783976
+
+2017-08-11 07:48:37 -0700 Julien Isorce <jisorce@oblong.com>
+
+ * omx/gstomxvideodec.c:
+ omxvideodec: remove wrong SettingsChanged ack
+ Partially revert 1b7d0b8:
+ omxvideodec: handle IL 1.2 behavior for OMX_SetParameter
+ It turned out it was a problem in the decoder which was
+ not updating some local variables upon SetParameter.
+ https://bugzilla.gnome.org/show_bug.cgi?id=783976
+
+2017-07-20 09:43:19 +0100 Julien Isorce <jisorce@oblong.com>
+
+ * omx/gstomxaudiodec.c:
+ * omx/gstomxaudioenc.c:
+ * omx/gstomxvideodec.c:
+ * omx/gstomxvideoenc.c:
+ omx{audio,video}{dec,enc}: sequentially disable ports because buffers are not shared
+ For the history, the parallel disable port has been introduced by:
+ "00be69f omxvideodec: Disable output port when setting a new format"
+ and then replicated to videoenc, audiodec and audioenc.
+ This is only required to do 'parallel' if buffers are shared between ports.
+ But for decoders and encoders the input and output buffer are of different
+ nature by definition (bitstream vs images). So they cannot be shared.
+ Also starting from IL 1.2.0 it is written in the spec that the parallel
+ disable is not allowed and will return an error. Except when buffers are
+ shared.
+ Again here we know in advance that they are not shared so let's always
+ do a sequential disable.
+ Tested on Desktop, rpi and zynqultrascaleplus.
+ https://bugzilla.gnome.org/show_bug.cgi?id=786348
+
+2017-08-17 12:26:05 +0100 Tim-Philipp Müller <tim@centricular.com>
+
+ * common:
+ Automatic update of common submodule
+ From 48a5d85 to 3f4aa96
+
+2017-08-10 12:16:53 -0400 Guillaume Desmottes <guillaume.desmottes@collabora.co.uk>
+
+ * omx/gstomxvideodec.c:
+ omxvideodec: use the decoder API to set latency
+ https://bugzilla.gnome.org/show_bug.cgi?id=785125
+
+2017-07-06 14:19:19 +0200 Guillaume Desmottes <guillaume.desmottes@collabora.co.uk>
+
+ * omx/gstomxvideodec.c:
+ * omx/gstomxvideoenc.c:
+ omxvideoenc/dec: declare latency on zynqultrascaleplus
+ The OMX specification doesn't provide any API to expose the latency
+ introduced by encoders and decoders. We implemented this as a custom
+ extension as declaring the latency is needed for live pipelines like
+ video conferencing.
+ https://bugzilla.gnome.org/show_bug.cgi?id=785125
+
+2017-08-07 13:16:01 -0400 Guillaume Desmottes <guillaume.desmottes@collabora.co.uk>
+
+ * omx/gstomxvideoenc.c:
+ omxvideoenc: adjust stride and slice height from input
+ Use the stride and slice height information from the first buffer meta
+ data to adjust the settings of the input port.
+ This will ensure that the OMX input buffers match the GStreamer ones
+ and so will save us from having to copy line-by-line each one.
+ This is also the first step to allow the OMX encoder to receive dmabuf.
+ Tested on rpi and zynqultrascaleplus.
+ https://bugzilla.gnome.org/show_bug.cgi?id=785967
+
+2017-08-07 11:45:29 -0400 Guillaume Desmottes <guillaume.desmottes@collabora.co.uk>
+
+ * omx/gstomxvideoenc.c:
+ omxvideoenc: delay buffer configuration until component is enabled
+ No significant change for now. Just delay the input port configuration
+ of the buffer size related fields (stride, slice height, buffer size)
+ until the component is activated.
+ This will allow us to use the actual stride/height of the first input
+ and so avoid the buffer copying code path in most cases.
+ Tested on rpi and zynqultrascaleplus.
+ https://bugzilla.gnome.org/show_bug.cgi?id=785967
+
+2017-07-24 13:52:35 +0200 Guillaume Desmottes <guillaume.desmottes@collabora.co.uk>
+
+ * omx/gstomxvideodec.c:
+ * omx/gstomxvideoenc.c:
+ omxvideodec/enc: delay allocation after the allocation query
+ Allocating OMX components buffers in set_format() is too early.
+ Doing it when receiving the first buffers will allow the element to use
+ the information from the allocation query and/or the first incoming
+ buffer to pick to best allocation mode.
+ Tested on raspberry pi with dynamic resolution changes on decoder and
+ encoder input.
+ https://bugzilla.gnome.org/show_bug.cgi?id=785967
+
+2017-07-25 14:27:45 +0200 Guillaume Desmottes <guillaume.desmottes@collabora.co.uk>
+
+ * omx/gstomxvideoenc.c:
+ omxvideoenc: start src thread in handle_frame()
+ Makes the code simpler as we no longer need to restart the thread in
+ gst_omx_video_enc_flush() and It's more symetric which the omxvideodec
+ implementation.
+ I'm also going to move the enabling of the OMX component in
+ handle_frame() and the src pad thread needs to be started after it.
+ https://bugzilla.gnome.org/show_bug.cgi?id=785967
+
+2017-07-25 14:07:30 +0200 Guillaume Desmottes <guillaume.desmottes@collabora.co.uk>
+
+ * omx/gstomxvideodec.c:
+ omxvideodec: earlier return if downstream_flow_ret is not OK
+ There is no point to (re)start the src thread if, for example, we are
+ flushing.
+ https://bugzilla.gnome.org/show_bug.cgi?id=785967
+
+2017-07-24 12:31:37 +0200 Guillaume Desmottes <guillaume.desmottes@collabora.co.uk>
+
+ * omx/gstomxvideodec.c:
+ * omx/gstomxvideodec.h:
+ omxvideodec: factor out enable and disable code
+ No semantic change, just factor out the code enabling and disabling the
+ component to their own functions.
+ Makes the code easier to read as the set_format() method was already
+ pretty big. Will also allow us to easily change the enabling logic.
+ https://bugzilla.gnome.org/show_bug.cgi?id=785967
+
+2017-07-24 12:31:37 +0200 Guillaume Desmottes <guillaume.desmottes@collabora.co.uk>
+
+ * omx/gstomxvideoenc.c:
+ * omx/gstomxvideoenc.h:
+ omxvideoenc: factor out enable and disable code
+ No semantic change, just factor out the code enabling and disabling the
+ component to their own functions.
+ Makes the code easier to read as the set_format() method was already
+ pretty big. Will also allow us to easily change the enabling logic.
+ https://bugzilla.gnome.org/show_bug.cgi?id=785967
+
+2017-07-27 12:12:01 +0200 Guillaume Desmottes <guillaume.desmottes@collabora.co.uk>
+
+ * omx/gstomx.c:
+ omx: also reset nFilledLen before calling OMX_FillThisBuffer()
+ The spec states that the buffer passed to OMX_FillThisBuffer() needs to be
+ empty. Some implementation may check it actually is by checking its
+ nFilledLen field, so best to reset it as well.
+ https://bugzilla.gnome.org/show_bug.cgi?id=785623
+
+2017-07-17 21:06:47 +0100 Julien Isorce <jisorce@oblong.com>
+
+ * omx/gstomxvideodec.c:
+ * omx/gstomxvideodec.h:
+ omxvideodec: make generic the OMX_UseEGLImage code path
+ Will be easier to maintain and to make enhancements.
+ Tested with Tizonia on Desktop.
+ Also tested with Bellagio to make sure it does not crash when
+ calling OMX_UseEGLImage and indeed it returns NotImplemented.
+ Then gst-omx fallback to OMX_UseBuffer if it can and so on.
+ Also tested on rpi to make sure there is no regression.
+ https://bugzilla.gnome.org/show_bug.cgi?id=784365
+
+2017-07-21 11:52:00 -0400 Nicolas Dufresne <nicolas.dufresne@collabora.com>
+
+ * omx/gstomxvideodec.c:
+ omxvideodec: Fix segment seek
+ On segment seek, unlike EOS, we drain, but we cannot expect a flush
+ later to reset the decoder state. As a side effect, the decoder would
+ remain in EOS state and ignore any new incoming buffers.
+ To fix this, we call _flush() inside the _drain() function, and
+ _finish() becomes what _drain() was before. This way, for _finish() (the
+ eos case) we only drain, for _drain() triggered by segment seek or new
+ caps, we also reset the decoder state so it's ready to accept buffers.
+ https://bugzilla.gnome.org/show_bug.cgi?id=785237
+
+2017-07-10 15:00:58 +0200 Guillaume Desmottes <guillaume.desmottes@collabora.co.uk>
+
+ * omx/gstomxvideoenc.c:
+ omxvideoenc: ensure enough buffers are allocated in the pool
+ Handle allocation query and ensure enough buffers are allocated in
+ the negotiated pool. This help preventing buffer starvation in the pipeline.
+ https://bugzilla.gnome.org/show_bug.cgi?id=785122
+
+2017-07-04 12:16:39 +0200 Guillaume Desmottes <guillaume.desmottes@collabora.co.uk>
+
+ * configure.ac:
+ * meson.build:
+ * omx/Makefile.am:
+ * omx/gstomxbufferpool.c:
+ * omx/gstomxbufferpool.h:
+ * omx/gstomxvideodec.c:
+ * omx/gstomxvideodec.h:
+ * omx/meson.build:
+ omxvideodec: add dmabuf support for output
+ The zynqultrascaleplus OMX implementation has a custom extension
+ allowing decoders to output dmabuf and so avoid buffers copy between OMX
+ and GStreamer.
+ Make use of this extension when built on the zynqultrascaleplus. The
+ buffer pool code should be re-usable for other platforms as well.
+ https://bugzilla.gnome.org/show_bug.cgi?id=784847
+
+2017-06-20 00:13:33 +0100 Julien Isorce <jisorce@oblong.com>
+
+ * config/tizonia/gstomx.conf.in:
+ config: add OMX.Aratelia.video_decoder.vp8 to Tizonia config
+ Useful mostly for testing/debugging purpose as this is a software
+ based encoder (libvpxdec) for which GStreamer provides a direct
+ wrapper.
+ https://bugzilla.gnome.org/show_bug.cgi?id=783976
+
+2017-06-19 23:56:02 +0100 Julien Isorce <jisorce@oblong.com>
+
+ * omx/gstomxvideodec.c:
+ omxvideodec: handle IL 1.2 behavior for OMX_SetParameter
+ It triggers SettingsChanged on the other port and it is up to
+ the client to decide if it should lead to a port reconfiguration.
+ Settings are propagated to the other port for fields they have
+ in common. But this event is only triggered on the other port
+ if it actually change a setting.
+ https://bugzilla.gnome.org/show_bug.cgi?id=783976
+
+2017-07-18 23:41:17 +0100 Julien Isorce <jisorce@oblong.com>
+
+ * config/tizonia/gstomx.conf.in:
+ config: set rank to 0 for Tizonia's mp3 decoder
+ Should have been 0 from the initial commit
+ eed49b4231a063639f90279c8044404c2149902a
+
+2017-07-17 21:03:55 +0100 Julien Isorce <jisorce@oblong.com>
+
+ * omx/gstomxvideodec.c:
+ omxvideodec: fix file permissions
+ Introduced by ebc9b4903cbdac2793c24b05a1bb7acc3b67fae5
+
+2017-06-29 23:17:26 +0100 Julien Isorce <jisorce@oblong.com>
+
+ * omx/gstomxvideodec.c:
+ omxvideodec: fix buffer leak when eglimage setup fails
+ Can happen if gst_buffer_pool_acquire_buffer succeeds but
+ gst_buffer_n_memory (buffer) is not exactly 1.
+ In theory this should not happen because the decoder requests
+ EGLImage(RGBA) but better to fix any leak on corner cases.
+ https://bugzilla.gnome.org/show_bug.cgi?id=784365
+
+2017-07-17 18:36:36 +0530 Satya Prakash Gupta <sp.gupta@samsung.com>
+
+ * omx/gstomx.c:
+ omx: Possible Memory leak in gst_caps_from_string
+ https://bugzilla.gnome.org/show_bug.cgi?id=784978
+
+2017-07-17 15:48:44 +0530 Satya Prakash Gupta <sp.gupta@samsung.com>
+
+ * omx/gstomxvideoenc.c:
+ omxvideoenc: Fix deadlock in error case when draining
+ https://bugzilla.gnome.org/show_bug.cgi?id=784972
+
+2017-07-17 13:44:54 +0530 Satya Prakash Gupta <sp.gupta@samsung.com>
+
+ * omx/gstomxaudioenc.c:
+ omxaudioenc: Fix deadlock in error case when draining
+ https://bugzilla.gnome.org/show_bug.cgi?id=784967
+
+2017-06-02 12:36:30 +0200 Guillaume Desmottes <guillaume.desmottes@collabora.co.uk>
+
+ * configure.ac:
+ * meson.build:
+ * omx/gstomx.h:
+ build: include OMX_IndexExt and OMX_ComponentExt if present
+ These files may be used by OMX implementation to define custom extensions.
+ Include them if present as we are already doing with OMX_VideoExt.h
+ https://bugzilla.gnome.org/show_bug.cgi?id=784847
+
+2017-07-13 16:40:26 +1000 Jan Schmidt <jan@centricular.com>
+
+ * omx/gstomxh264enc.c:
+ omxh264enc: Re-add periodicty-idr property for backward compat
+ Retain backwards compatibility by adding a duplicate
+ property for periodicty-idr
+ https://bugzilla.gnome.org/show_bug.cgi?id=784370
+
+2017-06-30 15:15:06 +0200 Guillaume Desmottes <guillaume.desmottes@collabora.co.uk>
+
+ * omx/gstomxh264enc.c:
+ omxh264enc: fix typo in "periodicty-idr" property name
+ Also fix the 'nick' of the property.
+ https://bugzilla.gnome.org/show_bug.cgi?id=784370
+
+2017-06-29 22:48:47 +0100 Julien Isorce <jisorce@oblong.com>
+
+ * omx/gstomxvideodec.c:
+ * omx/gstomxvideodec.h:
+ omxvideodec: use OMX_UseBuffer
+ For example this allows the omx decoder to directly fill the
+ pixmaps coming from the video sink.
+ It only avoids a buffer copy when the decoder uses a pool provided
+ by a downstream element. So let's restrict this usage to situations
+ where the decoder decides to use a downstream buffer pool.
+ Tested with Tizonia/OMX.Aratelia.video_decoder.vp8
+ and with Bellagio/OMX.mesa.video_decoder.avc.
+ If it fails to setup buffers with OMX_UseBuffer the decoders
+ fallbacks to usual OMX_AllocateBuffer.
+ Also it allows to test on desktop the GstOMXBufferPool->other_pool
+ management which was previously only used in the OMX_UseEGLImage
+ case, i.e. on Rpi.
+ https://bugzilla.gnome.org/show_bug.cgi?id=784069
+
+2017-07-12 10:29:16 +0100 Julien Isorce <jisorce@oblong.com>
+
+ * omx/gstomx.c:
+ omx: do not always print an error if OMX_{UseBuffer,EGLImage} fails
+ Let the caller decide to print an error. Because it can be part of
+ a normal trial path.
+ https://bugzilla.gnome.org/show_bug.cgi?id=784069
+
+2017-07-12 16:00:53 +0200 Guillaume Desmottes <guillaume.desmottes@collabora.co.uk>
+
+ * omx/meson.build:
+ meson: add gstomxmp3enc
+ Commit 02d493e85921596f7cac7ef4af02fde500e9a5d8 didn't add
+ gstomxmp3enc.c to meson.
+ https://bugzilla.gnome.org/show_bug.cgi?id=784848
+
+2017-05-23 10:32:58 +0100 Julien Isorce <jisorce@oblong.com>
+
+ * config/tizonia/gstomx.conf.in:
+ config: add OMX.Aratelia.audio_encoder.mp3 to Tizonia config
+ Useful mostly for testing/debugging purpose as this is a software
+ based encoder (libmp3lame) for which GStreamer provides a direct
+ wrapper.
+ https://bugzilla.gnome.org/show_bug.cgi?id=782988
+
+2017-05-23 10:32:06 +0100 Julien Isorce <jisorce@oblong.com>
+
+ * omx/Makefile.am:
+ * omx/gstomx.c:
+ * omx/gstomxmp3enc.c:
+ * omx/gstomxmp3enc.h:
+ omx: add gstomxmp3enc
+ Initial support and only tested with the software based
+ encoder OMX.Aratelia.audio_encoder.mp3 from Tizonia which
+ internally uses libmp3lame.
+ https://bugzilla.gnome.org/show_bug.cgi?id=782988
+
+2017-03-28 16:27:10 +0200 Guillaume Desmottes <guillaume.desmottes@collabora.co.uk>
+
+ * config/zynqultrascaleplus/gstomx.conf:
+ * omx/gstomx.c:
+ * omx/gstomx.h:
+ * omx/gstomxh264dec.c:
+ h264dec: add hack to pass profile and level to OMX
+ This information can be useful to zynqultrascaleplus decoders. They may
+ use this information to reduce startup latency by configuring itself
+ before receiving the first frames.
+ We also have a custom OMX extension allowing the decoder to report the
+ latency. The profile/level information helps it reporting a more
+ accurate latency earlier.
+ https://bugzilla.gnome.org/show_bug.cgi?id=783114
+
+2017-07-03 13:17:11 +0200 Guillaume Desmottes <guillaume.desmottes@collabora.co.uk>
+
+ * omx/Makefile.am:
+ * omx/gstomxh264enc.c:
+ * omx/gstomxh264utils.c:
+ * omx/gstomxh264utils.h:
+ * omx/meson.build:
+ omxh264enc: move profile and level parsing functions to their own files
+ Will allow to re-use them in the decoder element.
+ https://bugzilla.gnome.org/show_bug.cgi?id=783114
+
+2017-07-04 03:15:00 +0530 Gurkirpal Singh <gurkirpal204@gmail.com>
+
+ * config/meson.build:
+ * config/tizonia/meson.build:
+ * meson.build:
+ * meson_options.txt:
+ meson: Add tizonia option
+ https://bugzilla.gnome.org/show_bug.cgi?id=782800
+
+2017-04-29 02:56:59 +0530 Gurkirpal Singh <gurkirpal204@gmail.com>
+
+ * .gitignore:
+ * config/tizonia/Makefile.am:
+ * config/tizonia/gstomx.conf.in:
+ * config/tizonia/meson.build:
+ * configure.ac:
+ config: add omxmp3dec config for tizonia
+ GST_OMX_CONFIG_DIR=$HOME/gst/master/gst-omx/config/tizonia/ \
+ gst-launch-1.0 filesrc location=mpthreetest.mp3 ! id3demux ! \
+ mpegaudioparse ! omxmp3dec ! audioconvert ! pulsesink
+ v2: [Nicolas] Use template to create gstomx.conf using pkg-config
+ v3: [Nicolas] Ignore only config/tizonia/gstomx.conf
+ v4: [Nicolas] Add "/" for single occurence
+ https://bugzilla.gnome.org/show_bug.cgi?id=782800
+
+2017-05-07 20:09:54 +0530 Gurkirpal Singh <gurkirpal204@gmail.com>
+
+ * omx/gstomx.c:
+ omx: always ignore OMX_ErrorPortUnpopulated
+ It is safe to ignore it always. Tizonia notifies this error to pass
+ some khronos conformance tests. Problem is that gst-omx saves this
+ error in comp->last_error and then gst_omx_port_set_enabled early
+ error out which fails the pipeline.
+ https://bugzilla.gnome.org/show_bug.cgi?id=782800
+
+2017-04-29 02:53:26 +0530 Gurkirpal Singh <gurkirpal204@gmail.com>
+
+ * omx/gstomx.c:
+ * omx/gstomx.h:
+ omx: guard some omx enums with IL version
+ Some enums that existed in 1.1.2 just do not exit in 1.2.0
+ See https://www.khronos.org/registry/OpenMAX-IL/specs/OpenMAX_IL_1_2_0_Specification_redline.pdf
+ https://bugzilla.gnome.org/show_bug.cgi?id=782800
+
+2017-04-29 01:56:01 +0530 Gurkirpal Singh <gurkirpal204@gmail.com>
+
+ * configure.ac:
+ configure.ac: add tizonia target for --with-omx-target flag.
+ This will check for tizilheaders.pc which adds path to omx-il
+ headers its cflags. Can be installed all together with the 1.2 headers
+ with package tizilheaders if not building from sources:
+ https://github.com/tizonia/tizonia-openmax-il
+ It is also adviced to remove libomxil-bellagio-dev package because
+ it installs headers /usr/include directly, ex: /usr/include/OMX_Video.h.
+ https://bugzilla.gnome.org/show_bug.cgi?id=782800
+
+2017-07-05 10:47:41 +0100 Julien Isorce <jisorce@oblong.com>
+
+ * omx/gstomxaudioenc.c:
+ omxaudioenc: update local port_def after reopening the component
+ gst_omx_audio_enc_open will only update GstOMXAudioEnc->port->port_def.
+ Note that the component is reopen only if the flag
+ GST_OMX_HACK_NO_COMPONENT_RECONFIGURE is set.
+ https://bugzilla.gnome.org/show_bug.cgi?id=782418
+
+2017-07-05 10:48:52 +0100 Julien Isorce <jisorce@oblong.com>
+
+ * omx/gstomxvideoenc.c:
+ omxvideoenc: update local port_def after reopening the component
+ gst_omx_video_enc_open will only update GstOMXVideoEnc->port->port_def.
+ Note that the component is reopen only if the flag
+ GST_OMX_HACK_NO_COMPONENT_RECONFIGURE is set.
+ https://bugzilla.gnome.org/show_bug.cgi?id=782418
+
+2017-05-10 12:38:39 +0900 Sejun Park <sejun79.park@samsung.com>
+
+ * omx/gstomxvideodec.c:
+ omxvideodec: update local port_def after reopening the component
+ gst_omx_video_dec_open will only update GstOMXVideoDec->port->port_def.
+ Note that the component is reopen only if the flag
+ GST_OMX_HACK_NO_COMPONENT_RECONFIGURE is set.
+ https://bugzilla.gnome.org/show_bug.cgi?id=782418
+
+2017-07-03 16:33:06 +0200 Guillaume Desmottes <guillaume.desmottes@collabora.co.uk>
+
+ * omx/gstomxvideodec.c:
+ omxvideodec: increase the minimum number of allocated buffers
+ Ensure that enough buffers are allocated by adding up component's own
+ minimal plus the number of buffers requested by downstream.
+ This should prevent buffers starvation problem if downstream elements
+ are holding some of the buffers they required.
+ Also simplify the check on the maximum on buffers. What we actually care
+ about is to make sure the pool can hold the minimum of required buffers.
+ https://bugzilla.gnome.org/show_bug.cgi?id=784479
+
+2017-07-03 10:54:50 +0200 Guillaume Desmottes <guillaume.desmottes@collabora.co.uk>
+
+ * omx/gstomxh264enc.c:
+ omxh264enc: raise a warning if AVCIntraPeriod is not supported
+ Some platforms may not implement OMX_IndexConfigVideoAVCIntraPeriod and
+ use OMX_IndexParamVideoAvc instead to configure the GOP pattern.
+ So raise a warning instead of an error if this API is not implemented.
+ https://bugzilla.gnome.org/show_bug.cgi?id=784379
+
+2017-06-29 14:16:19 +0200 Guillaume Desmottes <guillaume.desmottes@collabora.co.uk>
+
+ * omx/gstomxh264enc.c:
+ * omx/gstomxh264enc.h:
+ omxh264enc: add 'b-frames' property
+ Add a property to control the number of B-frames produced by the
+ encoder using the OMX_VIDEO_PARAM_AVCTYPE OMX API.
+ https://bugzilla.gnome.org/show_bug.cgi?id=784379
+
+2017-06-30 14:18:35 +0200 Guillaume Desmottes <guillaume.desmottes@collabora.co.uk>
+
+ * omx/gstomxh264enc.c:
+ omxh264enc: fix typo in 'set_avc_intra_period'
+ https://bugzilla.gnome.org/show_bug.cgi?id=784379
+
+2017-05-22 11:23:33 +0200 Guillaume Desmottes <guillaume.desmottes@collabora.co.uk>
+
+ * config/Makefile.am:
+ * config/meson.build:
+ * config/zynqultrascaleplus/Makefile.am:
+ * config/zynqultrascaleplus/gstomx.conf:
+ * config/zynqultrascaleplus/meson.build:
+ * configure.ac:
+ * meson.build:
+ * meson_options.txt:
+ add 'zynqultrascaleplus' as OMX target
+ Adding support for the 'Zynq UltraScale+' as a new OMX target.
+ See https://www.xilinx.com/products/silicon-devices/soc/zynq-ultrascale-mpsoc.html
+ for details about the platform.
+ https://bugzilla.gnome.org/show_bug.cgi?id=783097
+
+2017-05-21 15:23:09 +0100 Julien Isorce <jisorce@oblong.com>
+
+ * config/bellagio/gstomx.conf:
+ config: add OMX.mesa.video_decoder.{avc,mpeg2} for Bellagio config
+ Install libomxil-bellagio0 and make sure mesa has been built with
+ --enable-omx. Check there is /usr/lib/libomxil-bellagio0/libomx_mesa.so
+ then run omxregister-bellagio to regenerate $XDG_DATA_HOME/.omxregister
+ Then omxh264dec and omxmpeg2dec should load.
+ https://bugzilla.gnome.org/show_bug.cgi?id=782926
+
+2017-05-18 13:50:56 +0100 Julien Isorce <jisorce@oblong.com>
+
+ * configure.ac:
+ configure.ac: move omx features check after target selection
+ Does not change anything, except this will be useful for future commits.
+ Indeed some targets provide a .pc file where to look for the omx headers.
+ https://bugzilla.gnome.org/show_bug.cgi?id=782800
+
+2017-06-29 16:48:07 +0200 Guillaume Desmottes <guillaume.desmottes@collabora.co.uk>
+
+ * omx/gstomxh264dec.c:
+ omxh264dec: remove 'parsed=true' from sink pad
+ The decoder only requires to receive one frame per buffer which is
+ already enforced with 'alignment=au'. There is no need to require to
+ have a parser upstream.
+ Allow to run "encode ! decode" pipeline without having a parser.
+ https://bugzilla.gnome.org/show_bug.cgi?id=784344
+
+2017-06-16 13:28:33 +0200 Guillaume Desmottes <guillaume.desmottes@collabora.co.uk>
+
+ * omx/gstomxh264enc.c:
+ omxh264enc: set profile/level using OMX_VIDEO_PARAM_AVCTYPE as well
+ The OMX specification defines two API to set the AVC profile and level:
+ using OMX_VIDEO_PARAM_PROFILELEVELTYPE and OMX_VIDEO_PARAM_AVCTYPE.
+ We were already supporting the former but not the latter. We are now
+ setting both so implementation don't have to rely on a specific one.
+ https://bugzilla.gnome.org/show_bug.cgi?id=783862
+
+2017-06-16 13:19:33 +0200 Guillaume Desmottes <guillaume.desmottes@collabora.co.uk>
+
+ * omx/gstomxh264enc.c:
+ omxh264enc: factor out update_param_profile_level()
+ https://bugzilla.gnome.org/show_bug.cgi?id=783862
+
+2017-06-16 12:53:15 +0200 Guillaume Desmottes <guillaume.desmottes@collabora.co.uk>
+
+ * omx/gstomxh264enc.c:
+ omxh264enc: factor out string to profile/level enum conversion
+ https://bugzilla.gnome.org/show_bug.cgi?id=783862
+
+2017-06-28 15:06:10 +0200 Guillaume Desmottes <guillaume.desmottes@collabora.co.uk>
+
+ * omx/gstomxh264enc.c:
+ omxh264enc: use OMX_IndexConfigBrcmVideoIntraPeriod on pi
+ The OMX_VIDEO_CONFIG_AVCINTRAPERIOD.nPFrames setting isn't of any use on
+ the raspbery pi. Instead it uses a custom extension to define the I
+ frame period.
+ https://bugzilla.gnome.org/show_bug.cgi?id=783829
+
+2017-06-28 15:03:52 +0200 Guillaume Desmottes <guillaume.desmottes@collabora.co.uk>
+
+ * omx/gstomxh264enc.c:
+ omxh264enc: factor out set_avc_intra_perdiod()
+ https://bugzilla.gnome.org/show_bug.cgi?id=783829
+
+2017-06-02 12:48:57 +0200 Guillaume Desmottes <guillaume.desmottes@collabora.co.uk>
+
+ * meson.build:
+ meson: define HAVE_VIDEO_EXT if OMX_VideoExt.h is present
+ Meson build wasn't defining the HAVE_VIDEO_EXT like configure.ac does.
+ https://bugzilla.gnome.org/show_bug.cgi?id=783346
+
+2017-06-11 12:32:01 +0000 Graham Leggett <minfrin@sharp.fm>
+
+ * omx/gstomxvideoenc.c:
+ omxvideoenc: Improve debug output when setting codec state due to new codec_data fails
+ https://bugzilla.gnome.org/show_bug.cgi?id=783657
+
+2017-05-20 14:49:20 +0100 Julien Isorce <jisorce@oblong.com>
+
+ * omx/gstomx.c:
+ omx: allow 0 feature
+ Previously the omx plugin was blacklisted if GST_OMX_CONFIG_DIR
+ points to an invalid path or if the gstomx.conf contains 0 valid
+ component.
+ Problem is that once the plugin is blacklisted, a rescan is not
+ triggered upon changes of the env var or the gstomx.conf file
+ despite being setup with gst_plugin_add_dependency.
+ This also makes it more consistent with other plugins that auto
+ generate features. For example gst-{ffmeg,libav}, gstreamer-vaapi,
+ v4l2 video dec.
+ To clarify the diff, the plugin_init func will return TRUE even if
+ g_key_file_get_groups returns 0 element and even if
+ g_key_file_load_from_dirs fails.
+ https://bugzilla.gnome.org/show_bug.cgi?id=782867
+
+2017-04-26 22:52:17 +0530 Gurkirpal Singh <gurkirpal204@gmail.com>
+
+ * config/bellagio/gstomx.conf:
+ config: add OMX.st.audio_decoder.mp3.mad for Bellagio config
+ MP3 Software decoder (libmad based) but useful for testing
+ and to compare with other targets.
+ GST_OMX_CONFIG_DIR=$HOME/gst/master/gst-omx/config/bellagio/ \
+ gst-launch-1.0 filesrc location=mpthreetest.mp3 ! id3demux ! \
+ mpegaudioparse ! omxmp3dec ! audioconvert ! pulsesink
+ Didn't add 'local' in core-name path compared to other components
+ in that same gstomx.conf file because OMX.st.audio_decoder.mp3.mad
+ comes with the Ubuntu package 'libomxil-bellagio0-components-mad'.
+ All other components listed in this gstomx.conf for Bellagio, are
+ not provided by any Ubuntu packages. It could explain the 'local',
+ i.e. requiring to build them from source.
+ dpkg -L libomxil-bellagio0
+ /usr/lib/libomxil-bellagio.so.0
+ https://bugzilla.gnome.org/show_bug.cgi?id=781786
+ Signed-off-by: Gurkirpal Singh <gurkirpal204@gmail.com>
+ Signed-off-by: Julien Isorce <jisorce@oblong.com>
+
+2017-05-16 14:39:04 -0400 Nicolas Dufresne <nicolas.dufresne@collabora.com>
+
+ * configure.ac:
+ Remove plugin specific static build option
+ Static and dynamic plugins now have the same interface. The standard
+ --enable-static/--enable-shared toggle are sufficient.
+
+2017-05-10 12:10:10 +0900 Sejun Park <sejun79.park@samsung.com>
+
+ * omx/gstomxvideodec.c:
+ omxvideodec: Removed unreachable code
+ https://bugzilla.gnome.org/show_bug.cgi?id=782416
+
+2017-05-09 16:26:44 +0200 Guillaume Desmottes <guillaume.desmottes@collabora.co.uk>
+
+ * omx/meson.build:
+ meson: add dep on GModule
+ libgstomx uses the GModule API and so needs it in its dependencies list.
+ https://bugzilla.gnome.org/show_bug.cgi?id=782387
+
+2017-05-09 13:27:28 +0000 Tim-Philipp Müller <tim@centricular.com>
+
+ * meson.build:
+ meson: fix config.h generation
+ "No such input file config.h.meson", but it's not needed anyway.
+ https://bugzilla.gnome.org/show_bug.cgi?id=782382
+
+2017-05-04 18:59:33 +0300 Sebastian Dröge <sebastian@centricular.com>
+
+ * configure.ac:
+ * meson.build:
+ Back to development
+
=== release 1.12.0 ===
-2017-05-04 Sebastian Dröge <slomo@coaxion.net>
+2017-05-04 15:48:56 +0300 Sebastian Dröge <sebastian@centricular.com>
+ * ChangeLog:
+ * NEWS:
+ * RELEASE:
* configure.ac:
- releasing 1.12.0
+ * gst-omx.doap:
+ * meson.build:
+ Release 1.12.0
=== release 1.11.91 ===
-# GStreamer 1.14 Release Notes
+
+
+GSTREAMER 1.14 RELEASE NOTES
+
GStreamer 1.14.0 has not been released yet. It is scheduled for release
-in late February / early March 2018.
+in early March 2018.
-There are unstable pre-releases available for testing and development purposes.
-The latest pre-release is version 1.13.1 and was released on 15 February 2018.
+There are unstable pre-releases available for testing and development
+purposes. The latest pre-release is version 1.13.90 (rc1) and was
+released on 03 March 2018.
-See [https://gstreamer.freedesktop.org/releases/1.14/][latest] for the latest
+See https://gstreamer.freedesktop.org/releases/1.14/ for the latest
version of this document.
-*Last updated: Thursday 15 February 2018, 16:30 UTC [(log)][gitlog]*
+_Last updated: Saturday 03 March 2018, 16:30 UTC (log)_
+
+
+Introduction
+
+The GStreamer team is proud to announce a new major feature release in
+the stable 1.x API series of your favourite cross-platform multimedia
+framework!
+
+As always, this release is again packed with new features, bug fixes and
+other improvements.
+
+
+Highlights
-[latest]: https://gstreamer.freedesktop.org/releases/1.14/
-[gitlog]: https://cgit.freedesktop.org/gstreamer/www/log/src/htdocs/releases/1.14/release-notes-1.14.md
+- this section will be completed shortly
-## Introduction
-The GStreamer team is proud to announce a new major feature release in the
-stable 1.x API series of your favourite cross-platform multimedia framework!
+Major new features and changes
-As always, this release is again packed with new features, bug fixes and other
-improvements.
+Noteworthy new API
-## Highlights
+- this section will be filled in shortly
-- this section will be completed shortly
+New Elements
-## Major new features and changes
+- this section will be filled in shortly
-### Noteworthy new API
+New element features and additions
-- this section will be filled in shortly
+- this section will be filled in shortly
-### New Elements
+Plugin and library moves
-- this section will be filled in shortly
+- this section will be filled in shortly
-### New element features and additions
+Plugin removals
-- this section will be filled in shortly
+- this section will be filled in shortly
-### Plugin and library moves
-- this section will be filled in shortly
+Miscellaneous API additions
-### Plugin removals
+- this section will be filled in shortly
-- this section will be filled in shortly
+GstPlayer
+- this section will be filled in shortly
-## Miscellaneous API additions
-- this section will be filled in shortly
+Miscellaneous changes
-### GstPlayer
+- this section will be filled in shortly
-- this section will be filled in shortly
+OpenGL integration
-## Miscellaneous changes
+- this section will be filled in shortly
-- this section will be filled in shortly
-### OpenGL integration
+Tracing framework and debugging improvements
-- this section will be filled in shortly
+- this section will be filled in shortly
-## Tracing framework and debugging improvements
-- this section will be filled in shortly
+Tools
-## Tools
+- this section will be filled in shortly
-- this section will be filled in shortly
-## GStreamer RTSP server
+GStreamer RTSP server
-- this section will be filled in shortly
+- this section will be filled in shortly
-## GStreamer VAAPI
-- this section will be filled in shortly
+GStreamer VAAPI
-## GStreamer Editing Services and NLE
+- this section will be filled in shortly
-- this section will be filled in shortly
-## GStreamer validate
+GStreamer Editing Services and NLE
-- this section will be filled in shortly
+- this section will be filled in shortly
-## GStreamer Python Bindings
-- this section will be filled in shortly
+GStreamer validate
-## Build and Dependencies
+- this section will be filled in shortly
-- this section will be filled in shortly
-## Platform-specific improvements
+GStreamer Python Bindings
-### Android
+- this section will be filled in shortly
-- this section will be filled in shortly
-### macOS and iOS
+Build and Dependencies
-- this section will be filled in shortly
+- this section will be filled in shortly
-### Windows
-- this section will be filled in shortly
+Platform-specific improvements
-## Contributors
+Android
-- this section will be filled in shortly
+- this section will be filled in shortly
+
+macOS and iOS
+
+- this section will be filled in shortly
+
+Windows
+
+- this section will be filled in shortly
+
+
+Contributors
+
+Aaron Boxer, Adrián Pardini, Adrien SCH, Akinobu Mita, Alban Bedel,
+Alessandro Decina, Alex Ashley, Alicia Boya García, Alistair Buxton,
+Alvaro Margulis, Anders Jonsson, Andreas Frisch, Andrejs Vasiljevs,
+Andrew Bott, Antoine Jacoutot, Antonio Ospite, Antoni Silvestre, Anton
+Obzhirov, Anuj Jaiswal, Arjen Veenhuizen, Arnaud Bonatti, Arun Raghavan,
+Ashish Kumar, Aurélien Zanelli, Ayaka, Branislav Katreniak, Branko
+Subasic, Brion Vibber, Carlos Rafael Giani, Cassandra Rommel, Chris
+Bass, Chris Paulson-Ellis, Christoph Reiter, Claudio Saavedra, Clemens
+Lang, Cyril Lashkevich, Daniel van Vugt, Dave Craig, Dave Johnstone,
+David Evans, David Schleef, Deepak Srivastava, Dimitrios Katsaros,
+Dmitry Zhadinets, Dongil Park, Dustin Spicuzza, Eduard Sinelnikov,
+Edward Hervey, Enrico Jorns, Eunhae Choi, Ezequiel Garcia, fengalin,
+Filippo Argiolas, Florent Thiéry, Florian Zwoch, Francisco Velazquez,
+François Laignel, fvanzile, George Kiagiadakis, Georg Lippitsch, Graham
+Leggett, Guillaume Desmottes, Gurkirpal Singh, Gwang Yoon Hwang, Gwenole
+Beauchesne, Haakon Sporsheim, Haihua Hu, Håvard Graff, Heekyoung Seo,
+Heinrich Fink, Holger Kaelberer, Hoonhee Lee, Hosang Lee, Hyunjun Ko,
+Ian Jamison, James Stevenson, Jan Alexander Steffens (heftig), Jan
+Schmidt, Jason Lin, Jens Georg, Jeremy Hiatt, Jérôme Laheurte, Jimmy
+Ohn, Jochen Henneberg, John Ludwig, John Nikolaides, Jonathan Karlsson,
+Josep Torra, Juan Navarro, Juan Pablo Ugarte, Julien Isorce, Jun Xie,
+Jussi Kukkonen, Justin Kim, Lasse Laursen, Lubosz Sarnecki, Luc
+Deschenaux, Luis de Bethencourt, Marcin Lewandowski, Mario Alfredo
+Carrillo Arevalo, Mark Nauwelaerts, Martin Kelly, Matej Knopp, Mathieu
+Duponchelle, Matteo Valdina, Matt Fischer, Matthew Waters, Matthieu
+Bouron, Matthieu Crapet, Matt Staples, Michael Catanzaro, Michael
+Olbrich, Michael Shigorin, Michael Tretter, Michał Dębski, Michał Górny,
+Michele Dionisio, Miguel París, Mikhail Fludkov, Munez, Nael Ouedraogo,
+Neos3452, Nicholas Panayis, Nick Kallen, Nicola Murino, Nicolas
+Dechesne, Nicolas Dufresne, Nirbheek Chauhan, Ognyan Tonchev, Ole André
+Vadla Ravnås, Oleksij Rempel, Olivier Crête, Omar Akkila, Orestis
+Floros, Patricia Muscalu, Patrick Radizi, Paul Kim, Per-Erik Brodin,
+Peter Seiderer, Philip Craig, Philippe Normand, Philippe Renon, Philipp
+Zabel, Pierre Pouzol, Piotr Drąg, Ponnam Srinivas, Pratheesh Gangadhar,
+Raimo Järvi, Ramprakash Jelari, Ravi Kiran K N, Reynaldo H. Verdejo
+Pinochet, Rico Tzschichholz, Robert Rosengren, Roland Peffer, Руслан
+Ижбулатов, Sam Hurst, Sam Thursfield, Sangkyu Park, Sanjay NM, Satya
+Prakash Gupta, Scott D Phillips, Sean DuBois, Sebastian Cote, Sebastian
+Dröge, Sebastian Rasmussen, Sejun Park, Sergey Borovkov, Seungha Yang,
+Shakin Chou, Shinya Saito, Simon Himmelbauer, Sky Juan, Song Bing,
+Sreerenj Balachandran, Stefan Kost, Stefan Popa, Stefan Sauer, Stian
+Selnes, Thiago Santos, Thibault Saunier, Thijs Vermeir, Tim Allen,
+Tim-Philipp Müller, Ting-Wei Lan, Tomas Rataj, Tom Bailey, Tonu Jaansoo,
+U. Artie Eoff, Umang Jain, Ursula Maplehurst, VaL Doroshchuk, Vasilis
+Liaskovitis, Víctor Manuel Jáquez Leal, vijay, Vincent Penquerc'h,
+Vineeth T M, Vivia Nikolaidou, Wang Xin-yu (王昕宇), Wei Feng, Wim
+Taymans, Wonchul Lee, Xabier Rodriguez Calvar, Xavier Claessens,
+XuGuangxin, Yasushi SHOJI, Yi A Wang, Youness Alaoui,
... and many others who have contributed bug reports, translations, sent
suggestions or helped testing.
-## Bugs fixed in 1.14
-- this section will be filled in shortly
+Bugs fixed in 1.14
-More than [704 bugs][bugs-fixed-in-1.14] have been fixed during
-the development of 1.14.
+- this section will be filled in shortly
+
+More than 704 bugs have been fixed during the development of 1.14.
This list does not include issues that have been cherry-picked into the
-stable 1.12 branch and fixed there as well, all fixes that ended up in the
-1.12 branch are also included in 1.14.
+stable 1.12 branch and fixed there as well, all fixes that ended up in
+the 1.12 branch are also included in 1.14.
+
+This list also does not include issues that have been fixed without a
+bug report in bugzilla, so the actual number of fixes is much higher.
-This list also does not include issues that have been fixed without a bug
-report in bugzilla, so the actual number of fixes is much higher.
-[bugs-fixed-in-1.14]: https://bugzilla.gnome.org/buglist.cgi?bug_status=RESOLVED&bug_status=VERIFIED&classification=Platform&limit=0&list_id=213265&order=bug_id&product=GStreamer&query_format=advanced&resolution=FIXED&target_milestone=1.12.1&target_milestone=1.12.2&target_milestone=1.12.3&target_milestone=1.12.4&target_milestone=1.13.1&target_milestone=1.13.2&target_milestone=1.13.3&target_milestone=1.13.4&target_milestone=1.13.90&target_milestone=1.13.91&target_milestone=1.14.0
+Stable 1.14 branch
-## Stable 1.14 branch
+After the 1.14.0 release there will be several 1.14.x bug-fix releases
+which will contain bug fixes which have been deemed suitable for a
+stable branch, but no new features or intrusive changes will be added to
+a bug-fix release usually. The 1.14.x bug-fix releases will be made from
+the git 1.14 branch, which is a stable branch.
-After the 1.14.0 release there will be several 1.14.x bug-fix releases which
-will contain bug fixes which have been deemed suitable for a stable branch,
-but no new features or intrusive changes will be added to a bug-fix release
-usually. The 1.14.x bug-fix releases will be made from the git 1.14 branch,
-which is a stable branch.
+1.14.0
-### 1.14.0
+1.14.0 is scheduled to be released in early March 2018.
-1.14.0 is scheduled to be released in late February / early March 2018.
-## Known Issues
+Known Issues
-- The `webrtcdsp` element is currently not shipped as part of the Windows
- binary packages due to a [build system issue][bug-770264].
+- The webrtcdsp element is currently not shipped as part of the
+ Windows binary packages due to a build system issue.
-[bug-770264]: https://bugzilla.gnome.org/show_bug.cgi?id=770264
-## Schedule for 1.16
+Schedule for 1.16
-Our next major feature release will be 1.16, and 1.15 will be the unstable
-development version leading up to the stable 1.16 release. The development
-of 1.15/1.16 will happen in the git master branch.
+Our next major feature release will be 1.16, and 1.15 will be the
+unstable development version leading up to the stable 1.16 release. The
+development of 1.15/1.16 will happen in the git master branch.
-The plan for the 1.16 development cycle is yet to be confirmed, but it is
-expected that feature freeze will be around August 2017
-followed by several 1.15 pre-releases and the new 1.16 stable release
-in September.
+The plan for the 1.16 development cycle is yet to be confirmed, but it
+is expected that feature freeze will be around August 2017 followed by
+several 1.15 pre-releases and the new 1.16 stable release in September.
-1.16 will be backwards-compatible to the stable 1.14, 1.12, 1.10, 1.8, 1.6, 1.4,
-1.2 and 1.0 release series.
+1.16 will be backwards-compatible to the stable 1.14, 1.12, 1.10, 1.8,
+1.6, 1.4, 1.2 and 1.0 release series.
-- - -
+------------------------------------------------------------------------
-*These release notes have been prepared by Tim-Philipp Müller.*
+_These release notes have been prepared by Tim-Philipp Müller._
-*License: [CC BY-SA 4.0](http://creativecommons.org/licenses/by-sa/4.0/)*
+_License: CC BY-SA 4.0_
projects / platform / upstream / gstreamer.git / commitdiff