rtl8192u: Don't use create_proc_read_entry()
authorDavid Howells <dhowells@redhat.com>
Mon, 8 Apr 2013 14:17:33 +0000 (15:17 +0100)
committerAl Viro <viro@zeniv.linux.org.uk>
Mon, 29 Apr 2013 19:41:50 +0000 (15:41 -0400)
Don't use create_proc_read_entry() as that is deprecated, but rather use
proc_create_data() and seq_file instead.  Whilst we're at it, reduce the
number of show functions where we can share them.

Note: proc_get_stats_ap() should probably use seq_file iteration rather than
list_for_each_entry().

Further note: There appears to be a lot of locking missing in this file to
defend against concurrent access by the driver doing normal operations.
Notably, ieee->network_list traversal and RWCAM/RCAMO command/response access.
Further, do any of the registers read have side effects upon reading?

Signed-off-by: David Howells <dhowells@redhat.com>
cc: Jerry Chuang <jerry-chuang@realtek.com>
cc: Mauro Carvalho Chehab <mchehab@redhat.com>
cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
cc: linux-wireless@vger.kernel.org
cc: devel@driverdev.osuosl.org
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
drivers/staging/rtl8192u/r8192U_core.c

index f7de2f6..433c3df 100644 (file)
@@ -71,6 +71,8 @@ double __extendsfdf2(float a) {return a;}
 //#include "r8192xU_phyreg.h"
 #include <linux/usb.h>
 #include <linux/slab.h>
+#include <linux/proc_fs.h>
+#include <linux/seq_file.h>
 // FIXME: check if 2.6.7 is ok
 
 #ifdef CONFIG_RTL8192_PM
@@ -472,103 +474,73 @@ void watch_dog_timer_callback(unsigned long data);
 
 static struct proc_dir_entry *rtl8192_proc;
 
-static int proc_get_stats_ap(char *page, char **start, off_t offset, int count,
-                                                       int *eof, void *data)
+static int proc_get_stats_ap(struct seq_file *m, void *v)
 {
-       struct net_device *dev = data;
+       struct net_device *dev = m->private;
        struct r8192_priv *priv = (struct r8192_priv *)ieee80211_priv(dev);
        struct ieee80211_device *ieee = priv->ieee80211;
        struct ieee80211_network *target;
 
-       int len = 0;
-
        list_for_each_entry(target, &ieee->network_list, list) {
-
-               len += snprintf(page + len, count - len, "%s ", target->ssid);
-
+               const char *wpa = "non_WPA";
                if (target->wpa_ie_len > 0 || target->rsn_ie_len > 0)
-                       len += snprintf(page + len, count - len, "WPA\n");
-               else
-                       len += snprintf(page + len, count - len, "non_WPA\n");
+                       wpa = "WPA";
+
+               seq_printf(m, "%s %s\n", target->ssid, wpa);
        }
 
-       *eof = 1;
-       return len;
+       return 0;
 }
 
-static int proc_get_registers(char *page, char **start,
-                         off_t offset, int count,
-                         int *eof, void *data)
+static int proc_get_registers(struct seq_file *m, void *v)
 {
-       struct net_device *dev = data;
-//     struct r8192_priv *priv = (struct r8192_priv *)ieee80211_priv(dev);
-
-       int len = 0;
-       int i,n;
+       struct net_device *dev = m->private;
+       int i,n, max = 0xff;
 
-       int max=0xff;
-
-       /* This dump the current register page */
-       len += snprintf(page + len, count - len,
-                       "\n####################page 0##################\n ");
+       seq_puts(m, "\n####################page 0##################\n ");
 
        for (n=0;n<=max;) {
                //printk( "\nD: %2x> ", n);
-               len += snprintf(page + len, count - len,
-                       "\nD:  %2x > ",n);
+               seq_printf(m, "\nD:  %2x > ",n);
 
                for (i=0;i<16 && n<=max;i++,n++)
-                       len += snprintf(page + len, count - len,
-                                       "%2x ",read_nic_byte(dev,0x000|n));
+                       seq_printf(m, "%2x ",read_nic_byte(dev,0x000|n));
 
                //      printk("%2x ",read_nic_byte(dev,n));
        }
-       len += snprintf(page + len, count - len,
-                       "\n####################page 1##################\n ");
+
+       seq_puts(m, "\n####################page 1##################\n ");
        for (n=0;n<=max;) {
                //printk( "\nD: %2x> ", n);
-               len += snprintf(page + len, count - len,
-                               "\nD:  %2x > ",n);
+               seq_printf(m, "\nD:  %2x > ",n);
 
                for (i=0;i<16 && n<=max;i++,n++)
-                       len += snprintf(page + len, count - len,
-                                       "%2x ",read_nic_byte(dev,0x100|n));
+                       seq_printf(m, "%2x ",read_nic_byte(dev,0x100|n));
 
                //      printk("%2x ",read_nic_byte(dev,n));
        }
-       len += snprintf(page + len, count - len,
-                       "\n####################page 3##################\n ");
+
+       seq_puts(m, "\n####################page 3##################\n ");
        for (n=0;n<=max;) {
                //printk( "\nD: %2x> ", n);
-               len += snprintf(page + len, count - len,
-                       "\nD:  %2x > ",n);
+               seq_printf(m, "\nD:  %2x > ",n);
 
                for(i=0;i<16 && n<=max;i++,n++)
-                       len += snprintf(page + len, count - len,
-                                       "%2x ",read_nic_byte(dev,0x300|n));
+                       seq_printf(m, "%2x ",read_nic_byte(dev,0x300|n));
 
                //      printk("%2x ",read_nic_byte(dev,n));
        }
 
-       len += snprintf(page + len, count - len,"\n");
-       *eof = 1;
-       return len;
+       seq_putc(m, '\n');
+       return 0;
 }
 
-
-
-
-
-static int proc_get_stats_tx(char *page, char **start,
-                         off_t offset, int count,
-                         int *eof, void *data)
+static int proc_get_stats_tx(struct seq_file *m, void *v)
 {
-       struct net_device *dev = data;
+       struct net_device *dev = m->private;
        struct r8192_priv *priv = (struct r8192_priv *)ieee80211_priv(dev);
 
-       int len = 0;
-
-       len += snprintf(page + len, count - len,
+       seq_printf(m,
                "TX VI priority ok int: %lu\n"
                "TX VI priority error int: %lu\n"
                "TX VO priority ok int: %lu\n"
@@ -629,22 +601,15 @@ static int proc_get_stats_tx(char *page, char **start,
 //             priv->stats.txbeaconerr
                );
 
-       *eof = 1;
-       return len;
+       return 0;
 }
 
-
-
-static int proc_get_stats_rx(char *page, char **start,
-                         off_t offset, int count,
-                         int *eof, void *data)
+static int proc_get_stats_rx(struct seq_file *m, void *v)
 {
-       struct net_device *dev = data;
+       struct net_device *dev = m->private;
        struct r8192_priv *priv = (struct r8192_priv *)ieee80211_priv(dev);
 
-       int len = 0;
-
-       len += snprintf(page + len, count - len,
+       seq_printf(m,
                "RX packets: %lu\n"
                "RX urb status error: %lu\n"
                "RX invalid urb error: %lu\n",
@@ -652,9 +617,9 @@ static int proc_get_stats_rx(char *page, char **start,
                priv->stats.rxstaterr,
                priv->stats.rxurberr);
 
-       *eof = 1;
-       return len;
+       return 0;
 }
+
 void rtl8192_proc_module_init(void)
 {
        RT_TRACE(COMP_INIT, "Initializing proc filesystem");
@@ -667,74 +632,77 @@ void rtl8192_proc_module_remove(void)
        remove_proc_entry(RTL819xU_MODULE_NAME, init_net.proc_net);
 }
 
-
-void rtl8192_proc_remove_one(struct net_device *dev)
+/*
+ * seq_file wrappers for procfile show routines.
+ */
+static int rtl8192_proc_open(struct inode *inode, struct file *file)
 {
-       struct r8192_priv *priv = (struct r8192_priv *)ieee80211_priv(dev);
-
+       struct net_device *dev = PDE(inode)->parent->data;
+       int (*show)(struct seq_file *, void *) = PDE_DATA(inode);
 
-       if (priv->dir_dev) {
-       //      remove_proc_entry("stats-hw", priv->dir_dev);
-               remove_proc_entry("stats-tx", priv->dir_dev);
-               remove_proc_entry("stats-rx", priv->dir_dev);
-       //      remove_proc_entry("stats-ieee", priv->dir_dev);
-               remove_proc_entry("stats-ap", priv->dir_dev);
-               remove_proc_entry("registers", priv->dir_dev);
-       //      remove_proc_entry("cck-registers",priv->dir_dev);
-       //      remove_proc_entry("ofdm-registers",priv->dir_dev);
-               //remove_proc_entry(dev->name, rtl8192_proc);
-               remove_proc_entry("wlan0", rtl8192_proc);
-               priv->dir_dev = NULL;
-       }
+       return single_open(file, show, dev);
 }
 
+static const struct file_operations rtl8192_proc_fops = {
+       .open           = rtl8192_proc_open,
+       .read           = seq_read,
+       .llseek         = seq_lseek,
+       .release        = seq_release,
+};
+
+/*
+ * Table of proc files we need to create.
+ */
+struct rtl8192_proc_file {
+       char name[12];
+       int (*show)(struct seq_file *, void *);
+};
+
+static const struct rtl8192_proc_file rtl8192_proc_files[] = {
+       { "stats-rx",   &proc_get_stats_rx },
+       { "stats-tx",   &proc_get_stats_tx },
+       { "stats-ap",   &proc_get_stats_ap },
+       { "registers",  &proc_get_registers },
+       { "" }
+};
 
 void rtl8192_proc_init_one(struct net_device *dev)
 {
-       struct proc_dir_entry *e;
+       const struct rtl8192_proc_file *f;
        struct r8192_priv *priv = (struct r8192_priv *)ieee80211_priv(dev);
-       priv->dir_dev = proc_mkdir(dev->name, rtl8192_proc);
-       if (!priv->dir_dev) {
-               RT_TRACE(COMP_ERR, "Unable to initialize /proc/net/rtl8192/%s\n",
-                     dev->name);
-               return;
-       }
-       e = create_proc_read_entry("stats-rx", S_IFREG | S_IRUGO,
-                                  priv->dir_dev, proc_get_stats_rx, dev);
-
-       if (!e) {
-               RT_TRACE(COMP_ERR,"Unable to initialize "
-                     "/proc/net/rtl8192/%s/stats-rx\n",
-                     dev->name);
-       }
-
 
-       e = create_proc_read_entry("stats-tx", S_IFREG | S_IRUGO,
-                                  priv->dir_dev, proc_get_stats_tx, dev);
-
-       if (!e) {
-               RT_TRACE(COMP_ERR, "Unable to initialize "
-                     "/proc/net/rtl8192/%s/stats-tx\n",
-                     dev->name);
+       if (rtl8192_proc) {
+               priv->dir_dev = proc_mkdir(dev->name, rtl8192_proc);
+               if (!priv->dir_dev) {
+                       RT_TRACE(COMP_ERR, "Unable to initialize /proc/net/rtl8192/%s\n",
+                                dev->name);
+                       return;
+               }
+               priv->dir_dev->data = dev;
+
+               for (f = rtl8192_proc_files; f->name[0]; f++) {
+                       if (!proc_create_data(f->name, S_IFREG | S_IRUGO,
+                                             priv->dir_dev,
+                                             rtl8192_proc_fops, f->show)) {
+                               RT_TRACE(COMP_ERR, "Unable to initialize "
+                                        "/proc/net/rtl8192/%s/%s\n",
+                                        dev->name, f->name);
+                               return;
+                       }
+               }
        }
+}
 
-       e = create_proc_read_entry("stats-ap", S_IFREG | S_IRUGO,
-                                  priv->dir_dev, proc_get_stats_ap, dev);
-
-       if (!e) {
-               RT_TRACE(COMP_ERR, "Unable to initialize "
-                     "/proc/net/rtl8192/%s/stats-ap\n",
-                     dev->name);
-       }
+void rtl8192_proc_remove_one(struct net_device *dev)
+{
+       struct r8192_priv *priv = (struct r8192_priv *)ieee80211_priv(dev);
 
-       e = create_proc_read_entry("registers", S_IFREG | S_IRUGO,
-                                  priv->dir_dev, proc_get_registers, dev);
-       if (!e) {
-               RT_TRACE(COMP_ERR, "Unable to initialize "
-                     "/proc/net/rtl8192/%s/registers\n",
-                     dev->name);
+       if (priv->dir_dev) {
+               remove_proc_subtree(dev->name, rtl8192_proc);
+               priv->dir_dev = NULL;
        }
 }
+
 /****************************************************************************
    -----------------------------MISC STUFF-------------------------
 *****************************************************************************/