mmc: sdhci-msm: Update dll_config_3 as per HSR

Update dll_config_3 as per the host clock frequency as specified in the
DLL Hardware Reference Guide.

Signed-off-by: Sarthak Garg <sartgarg@codeaurora.org>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/1590139950-7288-5-git-send-email-sartgarg@codeaurora.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

diff --git a/drivers/mmc/host/sdhci-msm.c b/drivers/mmc/host/sdhci-msm.c
index 6588077..054b151 100644 (file)
--- a/drivers/mmc/host/sdhci-msm.c
+++ b/drivers/mmc/host/sdhci-msm.c
@@ -62,6 +62,9 @@
 #define FINE_TUNE_MODE_EN      BIT(27)
 #define BIAS_OK_SIGNAL         BIT(29)
 
+#define DLL_CONFIG_3_LOW_FREQ_VAL      0x08
+#define DLL_CONFIG_3_HIGH_FREQ_VAL     0x10
+
 #define CORE_VENDOR_SPEC_POR_VAL 0xa9c
 #define CORE_CLK_PWRSAVE       BIT(1)
 #define CORE_HC_MCLK_SEL_DFLT  (2 << 8)
@@ -695,6 +698,16 @@ static int msm_init_cm_dll(struct sdhci_host *host)
                        ENABLE_DLL_LOCK_STATUS | BIAS_OK_SIGNAL;
                writel_relaxed(config, host->ioaddr +
                                msm_offset->core_dll_usr_ctl);
+
+               config = readl_relaxed(host->ioaddr +
+                               msm_offset->core_dll_config_3);
+               config &= ~0xFF;
+               if (msm_host->clk_rate < 150000000)
+                       config |= DLL_CONFIG_3_LOW_FREQ_VAL;
+               else
+                       config |= DLL_CONFIG_3_HIGH_FREQ_VAL;
+               writel_relaxed(config, host->ioaddr +
+                       msm_offset->core_dll_config_3);
        }
 
        config = readl_relaxed(host->ioaddr +