--- /dev/null
-COBJS += clock.o
-COBJS += cpu_info.o
-COBJS += sromc.o
-COBJS += timer.o
+ #
+ # (C) Copyright 2000-2003
+ # Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ #
+ # (C) Copyright 2008
+ # Guennadi Liakhovetki, DENX Software Engineering, <lg@denx.de>
+ #
+ # See file CREDITS for list of people who contributed to this
+ # project.
+ #
+ # This program is free software; you can redistribute it and/or
+ # modify it under the terms of the GNU General Public License as
+ # published by the Free Software Foundation; either version 2 of
+ # the License, or (at your option) any later version.
+ #
+ # This program is distributed in the hope that it will be useful,
+ # but WITHOUT ANY WARRANTY; without even the implied warranty of
+ # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ # GNU General Public License for more details.
+ #
+ # You should have received a copy of the GNU General Public License
+ # along with this program; if not, write to the Free Software
+ # Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ # MA 02111-1307 USA
+ #
+
+ include $(TOPDIR)/config.mk
+
+ LIB = $(obj)lib$(SOC).a
+
+ SOBJS = cache.o
+ SOBJS += reset.o
+
-OBJS := $(addprefix $(obj),$(COBJS) $(SOBJS))
++COBJS-y += clock.o
++COBJS-y += cpu_info.o
++COBJS-y += sromc.o
++COBJS-y += timer.o
++COBJS-$(CONFIG_CMD_SLEEP) += sleep.o
++COBJS-$(CONFIG_CMD_SLEEP) += sleep_asm.o
++COBJS-$(CONFIG_SOFT_I2C) += i2c-gpio.o
++COBJS-$(CONFIG_CMD_USBDOWN) += usb-hs-otg.o usb_downloader.o
+
+ SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
++OBJS := $(addprefix $(obj),$(COBJS-y) $(SOBJS))
+
+ all: $(obj).depend $(LIB)
+
+ $(LIB): $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
+
+ #########################################################################
+
+ # defines $(obj).depend target
+ include $(SRCTREE)/rules.mk
+
+ sinclude $(obj).depend
+
+ #########################################################################
--- /dev/null
--- /dev/null
++/*
++ * Copyright (C) 2009 Samsung Electronics
++ * Minkyu Kang <mk7.kang@samsung.com>
++ *
++ * See file CREDITS for list of people who contributed to this
++ * project.
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License as
++ * published by the Free Software Foundation; either version 2 of
++ * the License, or (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
++ * MA 02111-1307 USA
++ */
++
++#include <common.h>
++#include <asm/io.h>
++#include <asm/arch/gpio.h>
++#include <i2c-gpio.h>
++#include <i2c.h>
++
++static struct i2c_gpio_bus *i2c_gpio;
++
++void i2c_gpio_init(struct i2c_gpio_bus *bus, int len, int index)
++{
++ int i;
++ struct s5p_gpio_bank *bank;
++
++ i2c_gpio = bus;
++
++ /* init all i2c gpio buses */
++ for (i = 0; i < len; i++) {
++ bank = (struct s5p_gpio_bank *)i2c_gpio[i].bus->gpio_base;
++
++ if (!bank)
++ continue;
++
++ /* SDA */
++ gpio_direction_output(bank,
++ i2c_gpio[i].bus->sda_pin, 1);
++
++ /* SCL */
++ gpio_direction_output(bank,
++ i2c_gpio[i].bus->scl_pin, 1);
++ }
++
++ /* set default bus */
++ i2c_set_bus_num(index);
++}
++
++void i2c_gpio_set(int line, int value)
++{
++ struct s5p_gpio_bank *bank;
++ unsigned int bus_index;
++
++ bus_index = i2c_get_bus_num();
++
++ bank = (struct s5p_gpio_bank *)i2c_gpio[bus_index].bus->gpio_base;
++ if (!bank)
++ return;
++
++ if (line)
++ line = i2c_gpio[bus_index].bus->sda_pin;
++ else
++ line = i2c_gpio[bus_index].bus->scl_pin;
++
++ gpio_set_value(bank, line, value);
++}
++
++int i2c_gpio_get(void)
++{
++ struct s5p_gpio_bank *bank;
++ unsigned int bus_index;
++
++ bus_index = i2c_get_bus_num();
++
++ bank = (struct s5p_gpio_bank *)i2c_gpio[bus_index].bus->gpio_base;
++ if (!bank)
++ return 0;
++
++ return gpio_get_value(bank, i2c_gpio[bus_index].bus->sda_pin);
++}
++
++void i2c_gpio_dir(int dir)
++{
++ struct s5p_gpio_bank *bank;
++ unsigned int bus_index;
++
++ bus_index = i2c_get_bus_num();
++
++ bank = (struct s5p_gpio_bank *)i2c_gpio[bus_index].bus->gpio_base;
++ if (!bank)
++ return;
++
++ if (dir) {
++ gpio_direction_output(bank,
++ i2c_gpio[bus_index].bus->sda_pin, 0);
++ } else {
++ gpio_direction_input(bank,
++ i2c_gpio[bus_index].bus->sda_pin);
++ }
++}
--- /dev/null
--- /dev/null
++/*
++ * (C) Copyright 2009 Samsung Electronics
++ * Minkyu Kang <mk7.kang@samsung.com>
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License as
++ * published by the Free Software Foundation; either version 2 of
++ * the License, or (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
++ * MA 02111-1307 USA
++ *
++ */
++
++#ifndef __ASM_ARCH_UART_H_
++#define __ASM_ARCH_UART_H_
++
++#ifndef __ASSEMBLY__
++struct s5p_uart {
++ unsigned int ulcon;
++ unsigned int ucon;
++ unsigned int ufcon;
++ unsigned int umcon;
++ unsigned int utrstat;
++ unsigned int uerstat;
++ unsigned int ufstat;
++ unsigned int umstat;
++ unsigned char utxh;
++ unsigned char res1[3];
++ unsigned char urxh;
++ unsigned char res2[3];
++ unsigned int ubrdiv;
++ unsigned short udivslot;
++ unsigned char res3[2];
++ unsigned char res4[0x3d0];
++};
++#endif /* __ASSEMBLY__ */
++
++#endif
--- /dev/null
-$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ #
+ # (C) Copyright 2002-2006
+ # Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ #
+ # See file CREDITS for list of people who contributed to this
+ # project.
+ #
+ # This program is free software; you can redistribute it and/or
+ # modify it under the terms of the GNU General Public License as
+ # published by the Free Software Foundation; either version 2 of
+ # the License, or (at your option) any later version.
+ #
+ # This program is distributed in the hope that it will be useful,
+ # but WITHOUT ANY WARRANTY; without even the implied warranty of
+ # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ # GNU General Public License for more details.
+ #
+ # You should have received a copy of the GNU General Public License
+ # along with this program; if not, write to the Free Software
+ # Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ # MA 02111-1307 USA
+ #
+
+ include $(TOPDIR)/config.mk
+
+ LIB = $(obj)lib$(ARCH).a
+ LIBGCC = $(obj)libgcc.a
+
+ GLSOBJS += _ashldi3.o
+ GLSOBJS += _ashrdi3.o
+ GLSOBJS += _divsi3.o
+ GLSOBJS += _lshrdi3.o
+ GLSOBJS += _modsi3.o
+ GLSOBJS += _udivsi3.o
+ GLSOBJS += _umodsi3.o
+
+ GLCOBJS += div0.o
+
++SOBJS-y += _memcpy32.o
++
+ COBJS-y += board.o
+ COBJS-y += bootm.o
+ COBJS-y += cache.o
+ ifndef CONFIG_SYS_NO_CP15_CACHE
+ COBJS-y += cache-cp15.o
+ endif
+ COBJS-y += interrupts.o
+ COBJS-y += reset.o
+
+ SRCS := $(GLSOBJS:.o=.S) $(GLCOBJS:.o=.c) \
+ $(SOBJS-y:.o=.S) $(COBJS-y:.o=.c)
+ OBJS := $(addprefix $(obj),$(SOBJS-y) $(COBJS-y))
+ LGOBJS := $(addprefix $(obj),$(GLSOBJS)) \
+ $(addprefix $(obj),$(GLCOBJS))
+
+ # Always build libarm.a
+ TARGETS := $(LIB)
+
+ # Build private libgcc only when asked for
+ ifdef USE_PRIVATE_LIBGCC
+ TARGETS += $(LIBGCC)
+ endif
+
+ # For EABI conformant tool chains, provide eabi_compat()
+ ifneq (,$(findstring -mabi=aapcs-linux,$(PLATFORM_CPPFLAGS)))
+ TARGETS += $(obj)eabi_compat.o
+ endif
+
+ all: $(TARGETS)
+
++$(LIB): $(obj).depend $(OBJS) $(SOBJS)
++ $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+
+ $(LIBGCC): $(obj).depend $(LGOBJS)
+ $(AR) $(ARFLAGS) $@ $(LGOBJS)
+
+ #########################################################################
+
+ # defines $(obj).depend target
+ include $(SRCTREE)/rules.mk
+
+ sinclude $(obj).depend
+
+ #########################################################################
--- /dev/null
- static unsigned int get_hw_revision(struct s5pc1xx_gpio_bank *bank)
+/*
+ * Copyright (C) 2009 Samsung Electronics
+ * Kyungmin Park <kyungmin.park@samsung.com>
+ * Minkyu Kang <mk7.kang@samsung.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <i2c.h>
+#include <asm/io.h>
+#include <asm/arch/clk.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/keypad.h>
+#include <asm/arch/mmc.h>
+#include <asm/arch/power.h>
+#include <asm/arch/mem.h>
+#include <asm/errno.h>
+#include <fbutils.h>
+#include <lcd.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#define C100_MACH_START 3000
+#define C110_MACH_START 3100
+
+static unsigned int board_rev;
+static unsigned int battery_soc;
+static struct s5pc110_gpio *s5pc110_gpio;
+
+enum {
+ I2C_2,
+ I2C_GPIO3,
+ I2C_PMIC,
+ I2C_GPIO5,
+ I2C_GPIO6,
+ I2C_GPIO7,
+};
+
+/*
+ * i2c 2
+ * SDA: GPD1[4]
+ * SCL: GPD1[5]
+ */
+static struct i2c_gpio_bus_data i2c_2 = {
+ .sda_pin = 4,
+ .scl_pin = 5,
+};
+
+/*
+ * i2c gpio3
+ * SDA: GPJ3[6]
+ * SCL: GPJ3[7]
+ */
+static struct i2c_gpio_bus_data i2c_gpio3 = {
+ .sda_pin = 6,
+ .scl_pin = 7,
+};
+
+/*
+ * i2c pmic
+ * SDA: GPJ4[0]
+ * SCL: GPJ4[3]
+ */
+static struct i2c_gpio_bus_data i2c_pmic = {
+ .sda_pin = 0,
+ .scl_pin = 3,
+};
+
+/*
+ * i2c gpio5
+ * SDA: MP05[3]
+ * SCL: MP05[2]
+ */
+static struct i2c_gpio_bus_data i2c_gpio5 = {
+ .sda_pin = 3,
+ .scl_pin = 2,
+};
+
+/*
+ * i2c gpio6
+ * SDA: GPJ3[0]
+ * SCL: GPJ3[1]
+ */
+static struct i2c_gpio_bus_data i2c_gpio6 = {
+ .sda_pin = 0,
+ .scl_pin = 1,
+};
+
+/*
+ * i2c gpio6 - cypress
+ * SDA: GPJ3[4]
+ * SCL: GPJ3[5]
+ */
+static struct i2c_gpio_bus_data i2c_cypress_gpio6 = {
+ .sda_pin = 4,
+ .scl_pin = 5,
+};
+
+/*
+ * i2c gpio7 - cypress
+ * SDA: MP05[6]
+ * SCL: MP05[4]
+ */
+static struct i2c_gpio_bus_data i2c_cypress_gpio7 = {
+ .sda_pin = 6,
+ .scl_pin = 4,
+};
+
+static struct i2c_gpio_bus i2c_gpio[] = {
+ {
+ .bus = &i2c_2,
+ }, {
+ .bus = &i2c_gpio3,
+ }, {
+ .bus = &i2c_pmic,
+ }, {
+ .bus = &i2c_gpio5,
+ }, {
+ .bus = &i2c_gpio6,
+ }, {
+ .bus = NULL,
+ }
+};
+
+u32 get_board_rev(void)
+{
+ return board_rev;
+}
+
+static int hwrevision(int rev)
+{
+ return (board_rev & 0xf) == rev;
+}
+
+enum {
+ MACH_UNIVERSAL,
+ MACH_TICKERTAPE,
+ MACH_AQUILA,
+ MACH_P1P2,
+ MACH_GEMINUS,
+ MACH_CYPRESS,
+};
+#ifdef CONFIG_LCD
+typedef enum {
+ LCD_NONE,
+ LCD_AMOLED,
+ LCD_TFT,
+} lcd_type_t;
+
+static lcd_type_t lcd_type;
+#endif
+
+#define SPLIT_SCREEN_FEATURE 0x100
+
+/* board is MACH_AQUILA and board is like below. */
+#define J1_B2_BOARD 0x200
+#define LIMO_UNIVERSAL_BOARD 0x400
+#define LIMO_REAL_BOARD 0x800
+#define MEDIA_BOARD 0x1000
+#define BAMBOO_BOARD 0x2000
+/* board is MACH_P1P2 and board is like below. */
+#define P1_REAL_BOARD 0x200
+#define P2_REAL_BOARD 0x400
+#define HAYDN_BOARD 0x800
+
+#define BOARD_MASK 0xF00
+
+static int c110_machine_id(void)
+{
+ return gd->bd->bi_arch_number - C110_MACH_START;
+}
+
+static int machine_is_p1p2(void)
+{
+ return c110_machine_id() == MACH_P1P2;
+}
+
+static int machine_is_tickertape(void)
+{
+ return c110_machine_id() == MACH_TICKERTAPE;
+}
+
+static int machine_is_geminus(void)
+{
+ return c110_machine_id() == MACH_GEMINUS;
+}
+
+static int machine_is_cypress(void)
+{
+ return c110_machine_id() == MACH_CYPRESS;
+}
+
+static int board_is_limo_universal(void)
+{
+ return machine_is_aquila() && (board_rev & LIMO_UNIVERSAL_BOARD);
+}
+
+static int board_is_limo_real(void)
+{
+ return machine_is_aquila() && (board_rev & LIMO_REAL_BOARD);
+}
+
+static int board_is_media(void)
+{
+ return machine_is_aquila() && (board_rev & MEDIA_BOARD);
+}
+
+static int board_is_bamboo(void)
+{
+ return machine_is_aquila() && (board_rev & BAMBOO_BOARD);
+}
+
+static int board_is_j1b2(void)
+{
+ return machine_is_aquila() && (board_rev & J1_B2_BOARD);
+}
+
+static int board_is_p2_real(void)
+{
+ return machine_is_p1p2() && (board_rev & P2_REAL_BOARD);
+}
+
+#ifdef CONFIG_LCD
+static int lcd_is_amoled(void)
+{
+ return lcd_type == LCD_AMOLED;
+}
+
+static int lcd_is_tft(void)
+{
+ return lcd_type == LCD_TFT;
+}
+#endif
+static void enable_battery(void);
+
+void i2c_init_board(void)
+{
+ struct s5pc110_gpio *gpio = (struct s5pc110_gpio *)S5PC110_GPIO_BASE;
+ int num_bus;
+
+ if (cpu_is_s5pc100())
+ return;
+
+ num_bus = ARRAY_SIZE(i2c_gpio);
+
+ if (machine_is_cypress()) {
+ i2c_gpio[I2C_GPIO6].bus = &i2c_cypress_gpio6;
+ i2c_gpio[I2C_GPIO7].bus = &i2c_cypress_gpio7;
+ i2c_gpio[I2C_GPIO7].bus->gpio_base =
+ (unsigned int)&gpio->gpio_mp0_5;
+ } else {
+ num_bus--;
+ }
+
+ i2c_gpio[I2C_2].bus->gpio_base = (unsigned int)&gpio->gpio_d1;
+ i2c_gpio[I2C_GPIO3].bus->gpio_base = (unsigned int)&gpio->gpio_j3;
+ i2c_gpio[I2C_PMIC].bus->gpio_base = (unsigned int)&gpio->gpio_j4;
+ i2c_gpio[I2C_GPIO5].bus->gpio_base = (unsigned int)&gpio->gpio_mp0_5;
+ i2c_gpio[I2C_GPIO6].bus->gpio_base = (unsigned int)&gpio->gpio_j3;
+
+ i2c_gpio_init(i2c_gpio, num_bus, I2C_PMIC);
+
+ /* Reset on max17040 early */
+ if (battery_soc == 0)
+ enable_battery();
+}
+
+#ifdef CONFIG_MISC_INIT_R
+#define DEV_INFO_LEN 512
+static char device_info[DEV_INFO_LEN];
+static int display_info;
+
+static void dprintf(const char *fmt, ...)
+{
+ va_list args;
+ uint i;
+ char buf[128];
+
+ va_start(args, fmt);
+ i = vsprintf(buf, fmt, args);
+ va_end(args);
+
+ buf[127] = 0;
+
+ if ((strlen(device_info) + strlen(buf)) > (DEV_INFO_LEN - 1)) {
+ puts("Flushing device info...\n");
+ puts(device_info);
+ device_info[0] = 0;
+ }
+ strcat(device_info, buf);
+ puts(buf);
+}
+
+#ifdef CONFIG_S5PC1XXFB
+static void display_device_info(void)
+{
+ if (!display_info)
+ return;
+
+ init_font();
+ set_font_xy(0, 450);
+ set_font_color(FONT_WHITE);
+ fb_printf(device_info);
+ exit_font();
+
+ memset(device_info, 0x0, DEV_INFO_LEN);
+
+ udelay(5 * 1000 * 1000);
+}
+#endif
+
+static const char *board_name[] = {
+ "Universal",
+ "TickerTape",
+ "Aquila",
+ "P1P2",
+ "Geminus",
+ "Cypress",
+};
+
+enum {
+ MEM_4G1G1G,
+ MEM_4G2G1G,
+ MEM_4G3G1G,
+ MEM_4G4G1G,
+};
+
+static char feature_buffer[32];
+
+static char *display_features(int board, int board_rev)
+{
+ int count = 0;
+ char *buf = feature_buffer;
+
+ if (board == MACH_AQUILA) {
+ if (board_rev & SPLIT_SCREEN_FEATURE)
+ count += sprintf(buf + count, " - SplitScreen");
+ if (board_rev & J1_B2_BOARD)
+ count += sprintf(buf + count, " - J1 B2 board");
+ /* Limo Real or Universal */
+ if (board_rev & LIMO_REAL_BOARD)
+ count += sprintf(buf + count, " - Limo Real");
+ else if (board_rev & LIMO_UNIVERSAL_BOARD)
+ count += sprintf(buf + count, " - Limo Universal");
+ if (board_rev & MEDIA_BOARD)
+ count += sprintf(buf + count, " - Media");
+ if (board_rev & BAMBOO_BOARD)
+ count += sprintf(buf + count, " - Bamboo");
+ } else if (board == MACH_P1P2) {
+ /* P1P2 */
+ if (board_rev & P1_REAL_BOARD)
+ count += sprintf(buf + count, " - P1 Real");
+ else if (board_rev & P2_REAL_BOARD)
+ count += sprintf(buf + count, " - P2 Real");
+ else if (board_rev & HAYDN_BOARD)
+ count += sprintf(buf + count, " - Haydn");
+ else
+ count += sprintf(buf + count, " - Universal");
+ }
+
+ return buf;
+}
+
+static void check_board_revision(int board, int rev)
+{
+ switch (board) {
+ case MACH_AQUILA:
+ /* Limo Real or Universal */
+ if (rev & LIMO_UNIVERSAL_BOARD)
+ board_rev &= ~J1_B2_BOARD;
+ if (rev & LIMO_REAL_BOARD) {
+ board_rev &= ~(J1_B2_BOARD |
+ LIMO_UNIVERSAL_BOARD);
+ }
+ if (rev & MEDIA_BOARD)
+ board_rev &= ~(J1_B2_BOARD |
+ LIMO_UNIVERSAL_BOARD);
+ if (rev & BAMBOO_BOARD)
+ board_rev &= ~(J1_B2_BOARD |
+ LIMO_UNIVERSAL_BOARD |
+ LIMO_REAL_BOARD |
+ MEDIA_BOARD);
+ break;
+ case MACH_P1P2:
+ break;
+ case MACH_CYPRESS:
+ /* There's no HWREV_MODE3 */
+ board_rev &= ~(1 << 3);
+ /* Fall through */
+ case MACH_TICKERTAPE:
+ case MACH_GEMINUS:
+ board_rev &= ~BOARD_MASK;
+ break;
+ default:
+ break;
+ }
+}
+
- struct s5pc1xx_gpio_bank *bank;
++static unsigned int get_hw_revision(struct s5p_gpio_bank *bank)
+{
+ unsigned int rev;
+
+ gpio_direction_input(bank, 1);
+ gpio_direction_input(bank, 2);
+ gpio_direction_input(bank, 3);
+ gpio_direction_input(bank, 4);
+
+ gpio_set_pull(bank, 1, GPIO_PULL_NONE); /* HWREV_MODE3 */
+ gpio_set_pull(bank, 2, GPIO_PULL_NONE); /* HWREV_MODE0 */
+ gpio_set_pull(bank, 3, GPIO_PULL_NONE); /* HWREV_MODE1 */
+ gpio_set_pull(bank, 4, GPIO_PULL_NONE); /* HWREV_MODE2 */
+
+ rev = gpio_get_value(bank, 2);
+ rev |= (gpio_get_value(bank, 3) << 1);
+ rev |= (gpio_get_value(bank, 4) << 2);
+ rev |= (gpio_get_value(bank, 1) << 3);
+
+ return rev;
+}
+
+static void check_hw_revision(void)
+{
+ unsigned int board = MACH_UNIVERSAL; /* Default is Universal */
+
+ if (cpu_is_s5pc100()) {
+ struct s5pc100_gpio *gpio =
+ (struct s5pc100_gpio *)S5PC100_GPIO_BASE;
+
+ board_rev = get_hw_revision(&gpio->gpio_j0);
+
+ /* C100 TickerTape */
+ if (board_rev == 3)
+ board = MACH_TICKERTAPE;
+ } else {
+ struct s5pc110_gpio *gpio =
+ (struct s5pc110_gpio *)S5PC110_GPIO_BASE;
+
+ board_rev = get_hw_revision(&gpio->gpio_j0);
+
+ /*
+ * Note Check 'Aquila' board first
+ *
+ * TT: TickerTape
+ * SS: SplitScreen
+ * LRA: Limo Real Aquila
+ * LUA: Limo Universal Aquila
+ * OA: Old Aquila
+ * P1P2: Smart Book
+ * CYP: Cypress
+ * BB: Bamboo
+ *
+ * ADDR = 0xE0200000 + OFF
+ *
+ * OFF Universal BB LRA LUA OA TT SS P1P2 CYP
+ * J1: 0x0264 0x10 0x10 0x00 0x00 0x00 0x00 0x00 0x00
+ * J2: 0x0284 0x01 0x10 0x00
+ * H1: 0x0C24 W 0x28 0xA8 0x1C 0x18 0x0F
+ * H3: 0x0C64 0x03 0x07 0x0F 0xff
+ * D1: 0x00C4 0x0F 0x3F 0x3F 0x0F 0xXC 0x3F
+ * I: 0x0224 0x02 0x00 0x08
+ * MP03: 0x0324 0x9x 0xbx 0x9x
+ * MP05: 0x0364 0x80 0x88
+ */
+#if 0
+ /* C110 Aquila */
+ if (gpio_get_value(&gpio->gpio_j1, 4) == 0) {
+ board = MACH_AQUILA;
+ board_rev |= J1_B2_BOARD;
+
+ gpio_set_pull(&gpio->gpio_j2, 6, GPIO_PULL_NONE);
+ gpio_direction_input(&gpio->gpio_j2, 6);
+
+ /* Check board */
+ if (gpio_get_value(&gpio->gpio_h1, 2) == 0)
+ board_rev |= LIMO_UNIVERSAL_BOARD;
+
+ if (gpio_get_value(&gpio->gpio_h3, 2) == 0)
+ board_rev |= LIMO_REAL_BOARD;
+
+ if (gpio_get_value(&gpio->gpio_j2, 6) == 1)
+ board_rev |= MEDIA_BOARD;
+
+ /* set gpio to default value. */
+ gpio_set_pull(&gpio->gpio_j2, 6, GPIO_PULL_DOWN);
+ gpio_direction_output(&gpio->gpio_j2, 6, 0);
+ }
+ /* Workaround: C110 Aquila Rev0.6 */
+ if (board_rev == 6) {
+ board = MACH_AQUILA;
+ board_rev |= LIMO_REAL_BOARD;
+ }
+ /* C110 Aquila Bamboo */
+ if (gpio_get_value(&gpio->gpio_j2, 0) == 1) {
+ board = MACH_AQUILA;
+ board_rev |= BAMBOO_BOARD;
+ }
+
+ /* C110 TickerTape */
+ if (gpio_get_value(&gpio->gpio_d1, 0) == 0 &&
+ gpio_get_value(&gpio->gpio_d1, 1) == 0)
+ board = MACH_TICKERTAPE;
+
+ /* C110 Cypress: Do first this than P1P2 */
+ gpio_set_pull(&gpio->gpio_j2, 2, GPIO_PULL_NONE);
+ gpio_direction_input(&gpio->gpio_j2, 2);
+ if (gpio_get_value(&gpio->gpio_j2, 2) == 1)
+ board = MACH_CYPRESS;
+ gpio_set_pull(&gpio->gpio_j2, 2, GPIO_PULL_DOWN);
+
+ /* C110 P1P2 */
+ if (gpio_get_value(&gpio->gpio_h3, 7) == 1) {
+ board = MACH_P1P2;
+ board_rev &= ~BOARD_MASK;
+ }
+#endif
+
+ /* set gpio configuration for P1P2. */
+ gpio_direction_input(&gpio->gpio_j0, 6);
+ gpio_direction_input(&gpio->gpio_j0, 7);
+
+ /*
+ * do not change order below
+ * because it needs delay to get gpio value.
+ */
+ /* HWREV_MODE4 */
+ gpio_set_pull(&gpio->gpio_j0, 7, GPIO_PULL_NONE);
+ /* HWREV_MODE5 */
+ gpio_set_pull(&gpio->gpio_j0, 6, GPIO_PULL_NONE);
+
+/*
+ * GPJ0[7:6] 00 : P1_real - EVT1 _ AMOLED
+ * 11 : P1_real - EVT0 _ TFT
+ * */
+
+ if (gpio_get_value(&gpio->gpio_j0, 7) == 1) {
+ board = MACH_P1P2;
+ board_rev &= ~BOARD_MASK;
+ if (gpio_get_value(&gpio->gpio_j0, 6) == 1) {
+ board_rev |= P1_REAL_BOARD;
+ #ifdef CONFIG_LCD
+ lcd_type = LCD_TFT;
+ #endif
+ }
+ if (gpio_get_value(&gpio->gpio_j0, 6) == 0)
+ board_rev |= P2_REAL_BOARD;
+ } else {
+ board = MACH_P1P2;
+ board_rev &= ~BOARD_MASK;
+
+ if (gpio_get_value(&gpio->gpio_h1, 2) == 1)
+ board_rev |= HAYDN_BOARD;
+ else
+ board_rev |= P1_REAL_BOARD;
+
+ #ifdef CONFIG_LCD
+ if (gpio_get_value(&gpio->gpio_j0, 6) == 0) {
+ lcd_type = LCD_AMOLED;
+ }
+ #endif
+ }
+
+ /* set gpio to default value. */
+ /* HWREV_MODE4 */
+ gpio_set_pull(&gpio->gpio_j0, 6, GPIO_PULL_DOWN);
+ /* HWREV_MODE5 */
+ gpio_set_pull(&gpio->gpio_j0, 7, GPIO_PULL_DOWN);
+
+ if(board != MACH_P1P2)
+ {
+ /* C110 Geminus for rev0.0 */
+ gpio_set_pull(&gpio->gpio_j1, 2, GPIO_PULL_NONE);
+ gpio_direction_input(&gpio->gpio_j1, 2);
+ if (gpio_get_value(&gpio->gpio_j1, 2) == 1) {
+ board = MACH_GEMINUS;
+ if ((board_rev & ~BOARD_MASK) == 3)
+ board_rev &= ~0xff;
+ }
+ gpio_set_pull(&gpio->gpio_j1, 2, GPIO_PULL_DOWN);
+ gpio_direction_output(&gpio->gpio_j1, 2, 0);
+
+ /* C110 Geminus for rev0.1 ~ */
+ gpio_set_pull(&gpio->gpio_j0, 6, GPIO_PULL_NONE);
+ gpio_direction_input(&gpio->gpio_j0, 6);
+ if (gpio_get_value(&gpio->gpio_j0, 6) == 1)
+ board = MACH_GEMINUS;
+ gpio_set_pull(&gpio->gpio_j0, 6, GPIO_PULL_DOWN);
+ #ifdef CONFIG_LCD
+ lcd_type = LCD_NONE; /* TODO: if the board is not p1p2, this code should be modified */
+ #endif
+ }
+ }
+
+ /* Set machine id */
+ if (cpu_is_s5pc110())
+ gd->bd->bi_arch_number = C110_MACH_START + board;
+ else
+ gd->bd->bi_arch_number = C100_MACH_START + board;
+
+ /* Architecture Common settings */
+ if (cpu_is_s5pc110()) {
+ setenv("mtdparts", MTDPARTS_DEFAULT_4KB);
+ } else {
+ setenv("bootk", "onenand read 0x30007FC0 0x60000 0x300000; "
+ "bootm 0x30007FC0");
+ setenv("updatek", "onenand erase 0x60000 0x300000; "
+ "onenand write 0x31008000 0x60000 0x300000");
+ }
+}
+
+static void show_hw_revision(void)
+{
+ int board;
+
+ /*
+ * Workaround for Rev 0.3 + CP Ver ES 3.1
+ * it's Rev 0.4
+ */
+ if (board_is_limo_real()) {
+ if (hwrevision(0)) {
+ /* default is Rev 0.4 */
+ board_rev &= ~0xf;
+ board_rev |= 0x4;
+ }
+ }
+
+ if (cpu_is_s5pc110())
+ board = gd->bd->bi_arch_number - C110_MACH_START;
+ else
+ board = gd->bd->bi_arch_number - C100_MACH_START;
+
+ check_board_revision(board, board_rev);
+
+ /* Set CPU Revision */
+ if ((board_rev & 0xf) > 2) {
+ s5pc1xx_set_cpu_rev(0);
+ }
+
+ dprintf("HW Revision:\t%x (%s%s)\n", board_rev, board_name[board],
+ display_features(board, board_rev));
+}
+
+static void check_auto_burn(void)
+{
+ unsigned long magic_base = CONFIG_SYS_SDRAM_BASE + 0x02000000;
+ unsigned int count = 0;
+ char buf[64];
+
+ if (readl(magic_base) == 0x426f6f74) { /* ASICC: Boot */
+ printf("Auto burning bootloader\n");
+ count += sprintf(buf + count, "run updateb; ");
+ }
+ if (readl(magic_base + 0x04) == 0x4b65726e) { /* ASICC: Kern */
+ printf("Auto burning kernel\n");
+ count += sprintf(buf + count, "run updatek; ");
+ }
+
+ if (count) {
+ count += sprintf(buf + count, "reset");
+ setenv("bootcmd", buf);
+ }
+
+ /* Clear the magic value */
+ writel(0xa5a55a5a, magic_base);
+ writel(0xa5a55a5a, magic_base + 0x4);
+}
+
+static void pmic_pin_init(void)
+{
+ unsigned int reg, value;
+
+ if (cpu_is_s5pc100())
+ return;
+
+ /* AP_PS_HOLD: XEINT_0: GPH0[0]
+ * Note: Don't use GPIO PS_HOLD it doesn't work
+ */
+ reg = S5PC110_PS_HOLD_CONTROL;
+ value = readl(reg);
+ value |= S5PC110_PS_HOLD_DIR_OUTPUT |
+ S5PC110_PS_HOLD_DATA_HIGH |
+ S5PC110_PS_HOLD_OUT_EN;
+ writel(value, reg);
+
+ /* nPOWER: XEINT_22: GPH2[6] interrupt mode */
+ gpio_cfg_pin(&s5pc110_gpio->gpio_h2, 6, GPIO_IRQ);
+ gpio_set_pull(&s5pc110_gpio->gpio_h2, 6, GPIO_PULL_UP);
+}
+
+static void enable_ldos(void)
+{
+ if (cpu_is_s5pc100())
+ return;
+
+ if (machine_is_p1p2())
+ return;
+
+ /* TOUCH_EN: XMMC3DATA_3: GPG3[6] output high */
+ gpio_direction_output(&s5pc110_gpio->gpio_g3, 6, 1);
+}
+
+static void enable_t_flash(void)
+{
+ if (!(board_is_limo_universal() || board_is_limo_real()))
+ return;
+
+ /* T_FLASH_EN : XM0ADDR_13: MP0_5[4] output high */
+ gpio_direction_output(&s5pc110_gpio->gpio_mp0_5, 4, 1);
+}
+
+static void setup_limo_real_gpios(void)
+{
+ if (!board_is_limo_real())
+ return;
+
+ /*
+ * Note: Please write GPIO alphabet order
+ */
+ /* CODEC_LDO_EN: XVVSYNC_LDI: GPF3[4] output high */
+ gpio_direction_output(&s5pc110_gpio->gpio_f3, 4, 1);
+
+ if (hwrevision(0))
+ /* RESET_REQ_N: XM0BEN_1: MP0_2[1] output high */
+ gpio_direction_output(&s5pc110_gpio->gpio_mp0_2, 1, 1);
+ else
+ /* RESET_REQ_N: XM0CSn_2: MP0_1[2] output high */
+ gpio_direction_output(&s5pc110_gpio->gpio_mp0_1, 2, 1);
+
+ /* T_FLASH_DETECT: EINT28: GPH3[4] interrupt mode */
+ gpio_cfg_pin(&s5pc110_gpio->gpio_h3, 4, GPIO_IRQ);
+ gpio_set_pull(&s5pc110_gpio->gpio_h3, 4, GPIO_PULL_UP);
+}
+
+static void setup_media_gpios(void)
+{
+ if (!board_is_media())
+ return;
+
+ /*
+ * Note: Please write GPIO alphabet order
+ */
+ /* RESET_REQ_N: XM0CSn_2: MP0_1[2] output high */
+ gpio_direction_output(&s5pc110_gpio->gpio_mp0_1, 2, 1);
+
+ /* T_FLASH_DETECT: EINT28: GPH3[4] interrupt mode */
+ gpio_cfg_pin(&s5pc110_gpio->gpio_h3, 4, GPIO_IRQ);
+ gpio_set_pull(&s5pc110_gpio->gpio_h3, 4, GPIO_PULL_UP);
+}
+
+static void setup_p1p2_gpios(void)
+{
+ if (!machine_is_p1p2())
+ return;
+
+ /*
+ * Note: Please write GPIO alphabet order
+ */
+ /* RESET_REQ_N: XM0FRnB[1]: MP0_3[5] output high */
+ gpio_direction_output(&s5pc110_gpio->gpio_mp0_3, 5, 1);
+ /* CODEC_LDO_EN: XM0FRnB[2]: MP0_3[6] output high */
+ gpio_direction_output(&s5pc110_gpio->gpio_mp0_3, 6, 1);
+}
+
+#define KBR3 (1 << 3)
+#define KBR2 (1 << 2)
+#define KBR1 (1 << 1)
+#define KBR0 (1 << 0)
+
+static void check_p2_keypad(void)
+{
+ unsigned int auto_download = 0;
+ unsigned char addr = 0x34, val[2]; /* adp5587 key controller */
+ int i, ret;
+ i2c_set_bus_num(I2C_2);
+
+ if (i2c_probe(addr)) {
+ printf("Can't found adp5587 key controller\n");
+ return;
+ }
+ /* Row 8, Column 10 */
+ val[0] = 0xf;
+ ret = i2c_write(addr, 0x1D, 1, val, 1); /* Set KP_GPIO1 */
+ val[0] = 0xf;
+ ret |= i2c_write(addr, 0x1E, 1, val, 1); /* Set KP_GPIO2 */
+ val[0] = 0x3;
+ ret |= i2c_write(addr, 0x1F, 1, val, 1); /* Set KP_GPIO3 */
+ val[0] = 0x3f; /* CMP2_INT | CMP1_INT | OVR_FLOW_INT |
+ K_LCK_INT | GPI_INT | KE_INT */
+ ret |= i2c_write(addr, 0x02, 1, val, 1); /* Status is W1C */
+ val[0] = 0x19; /* INT_CFG | OVR_FLOW_IEN | KE_IEN */
+ ret |= i2c_write(addr, 0x01, 1, val, 1);
+ for (i = 0; i < 10; i++) {
+ udelay(1000); /* FIXME */
+ i2c_read(addr, 0x04 + i, 1, val, 1);
+ if (val[0] == 0x94)
+ auto_download = 1;
+ }
+
+ if (auto_download == 1)
+ setenv("bootcmd", "usbdown");
+}
+
+static void check_keypad(void)
+{
+ unsigned int reg, value;
+ unsigned int col_num, row_num;
+ unsigned int col_mask;
+ unsigned int col_mask_shift;
+ unsigned int row_state[4];
+ unsigned int i;
+ unsigned int auto_download = 0;
+
+ writel((readl(0xE010046C) | (0x1 << 21)), 0xE010046C);
+
+ if (cpu_is_s5pc100()) {
+ struct s5pc100_gpio *gpio =
+ (struct s5pc100_gpio *)S5PC100_GPIO_BASE;
+ row_num = 3;
+ col_num = 3;
+ /* Set GPH2[2:0] to KP_COL[2:0] */
+ gpio_cfg_pin(&gpio->gpio_h2, 0, 0x3);
+ gpio_cfg_pin(&gpio->gpio_h2, 1, 0x3);
+ gpio_cfg_pin(&gpio->gpio_h2, 2, 0x3);
+
+ /* Set GPH3[2:0] to KP_ROW[2:0] */
+ gpio_cfg_pin(&gpio->gpio_h3, 0, 0x3);
+ gpio_cfg_pin(&gpio->gpio_h3, 1, 0x3);
+ gpio_cfg_pin(&gpio->gpio_h3, 2, 0x3);
+ reg = S5PC110_KEYPAD_BASE;
+ col_mask = S5PC1XX_KEYIFCOL_MASK;
+ col_mask_shift = 0;
+} else {
+ if (board_is_limo_real() || board_is_limo_universal()) {
+ row_num = 2;
+ col_num = 3;
+ } else if (machine_is_p1p2()){
+ row_num = 2;
+ col_num = 3;
+ }
+ else {
+ row_num = 4;
+ col_num = 4;
+ }
+ for (i = 0; i < row_num; i++) {
+ /* Set GPH3[3:0] to KP_ROW[3:0] */
+ gpio_cfg_pin(&s5pc110_gpio->gpio_h3, i, 0x3);
+ gpio_set_pull(&s5pc110_gpio->gpio_h3, i, GPIO_PULL_UP);
+ }
+
+ for (i = 0; i < col_num; i++){
+ /* Set GPH2[3:0] to KP_COL[3:0] */
+ gpio_cfg_pin(&s5pc110_gpio->gpio_h2, i, 0x3);
+ gpio_set_pull(&s5pc110_gpio->gpio_h2,i, GPIO_PULL_DOWN);
+ }
+ reg = S5PC110_KEYPAD_BASE;
+ col_mask = S5PC110_KEYIFCOLEN_MASK;
+ col_mask_shift = 8;
+ }
+
+ /* KEYIFCOL reg clear */
+ writel(0, reg + S5PC1XX_KEYIFCOL_OFFSET);
+ /* key_scan */
+ for (i = 0; i < col_num; i++) {
+ value = col_mask;
+ value &= ~(1 << i) << col_mask_shift;
+ writel(value, reg + S5PC1XX_KEYIFCOL_OFFSET);
+ udelay(1000);
+ value = readl(reg + S5PC1XX_KEYIFROW_OFFSET);
+ row_state[i] = ~value & ((1 << row_num) - 1);
+ printf("[%d col] row_state: 0x%x :value = 0x%x\n", i, row_state[i], value);
+ }
+ if(row_state[2] & 0x2)
+ setenv("bootcmd","usbdown");
+}
+#if 0
+static void check_keypad(void)
+{
+ unsigned int reg, value;
+ unsigned int col_mask, row_mask;
+ unsigned int auto_download = 0;
+ unsigned int col_value[4], i;
+
+ if (cpu_is_s5pc100()) {
+ struct s5pc100_gpio *gpio =
+ (struct s5pc100_gpio *)S5PC100_GPIO_BASE;
+
+ /* Set GPH2[2:0] to KP_COL[2:0] */
+ gpio_cfg_pin(&gpio->gpio_h2, 0, 0x3);
+ gpio_cfg_pin(&gpio->gpio_h2, 1, 0x3);
+ gpio_cfg_pin(&gpio->gpio_h2, 2, 0x3);
+
+ /* Set GPH3[2:0] to KP_ROW[2:0] */
+ gpio_cfg_pin(&gpio->gpio_h3, 0, 0x3);
+ gpio_cfg_pin(&gpio->gpio_h3, 1, 0x3);
+ gpio_cfg_pin(&gpio->gpio_h3, 2, 0x3);
+
+ reg = S5PC100_KEYPAD_BASE;
+ } else {
+ if (board_is_limo_real() || board_is_limo_universal()) {
+ row_mask = 0x00FF;
+ col_mask = 0x0FFF;
+ } else {
+ row_mask = 0xFFFF;
+ col_mask = 0xFFFF;
+ }
+
+ for (i = 0; i < 4; i++) {
+ /* Set GPH3[3:0] to KP_ROW[3:0] */
+ if (row_mask & (0xF << (i << 2))) {
+ gpio_cfg_pin(&s5pc110_gpio->gpio_h3, i, 0x3);
+ if (!machine_is_p1p2())
+ gpio_set_pull(&s5pc110_gpio->gpio_h3,
+ i, GPIO_PULL_UP);
+ }
+
+ /* Set GPH2[3:0] to KP_COL[3:0] */
+ if (col_mask & (0xF << (i << 2)))
+ gpio_cfg_pin(&s5pc110_gpio->gpio_h2, i, 0x3);
+ if (machine_is_p1p2())
+ gpio_set_pull(&s5pc110_gpio->gpio_h2, i, GPIO_PULL_UP);
+ }
+
+ reg = S5PC110_KEYPAD_BASE;
+ }
+ /* init col */
+ value = 0x00;
+ writel(value, reg + S5PC1XX_KEYIFCOL_OFFSET);
+ value = readl(reg + S5PC1XX_KEYIFROW_OFFSET);
+ /* VOLUMEDOWN and CAM(Half shot) Button */
+ if ((value & KBR1) == 0) {
+ i = 0;
+ while (i < 4) {
+ value = readl(reg + S5PC1XX_KEYIFCOL_OFFSET);
+ value |= 0xff;
+ value &= ~(1 << i);
+ writel(value, reg + S5PC1XX_KEYIFCOL_OFFSET);
+ udelay(10*1000);
+ col_value[i++] = readl(reg + S5PC1XX_KEYIFROW_OFFSET);
+ }
+ writel(0x00, reg + S5PC1XX_KEYIFCOL_OFFSET);
+
+ /* expected value is row_value[0] = 0x00 row_value[1] = 0x01 */
+ /* workaround */
+ if ((col_value[0] & 0x3) == 0x3 && (col_value[1] & 0x3) == 0x3)
+ auto_download = 1;
+
+ if ((col_value[0] & 0x3) == 0x3 && (col_value[1] & 0x3) != 0x3)
+ display_info = 1;
+ if (machine_is_p1p2()) {
+ if ((col_value[0] & 0xd) == 0xd)
+ auto_download = 1;
+ }
+ }
+
+ if (auto_download)
+ setenv("bootcmd", "usbdown");
+}
+#endif
+
+static void enable_battery(void)
+{
+ unsigned char val[2];
+ unsigned char addr = 0x36; /* max17040 fuel gauge */
+
+ if (machine_is_aquila()) {
+ if (board_is_j1b2())
+ return;
+ }
+
+ if (machine_is_tickertape())
+ return;
+
+ if (machine_is_cypress())
+ i2c_set_bus_num(I2C_GPIO7);
+ else
+ i2c_set_bus_num(I2C_GPIO3);
+
+ if(machine_is_p1p2())
+ {
+ return;
+ }
+
+ if (i2c_probe(addr)) {
+ printf("Can't found max17040 fuel gauge\n");
+ return;
+ }
+
+ val[0] = 0x54;
+ val[1] = 0x00;
+ i2c_write(addr, 0xfe, 1, val, 2);
+}
+
+static void check_battery(void)
+{
+ unsigned char val[2];
+ unsigned char addr = 0x36; /* max17040 fuel gauge */
+
+ if(machine_is_p1p2())
+ {
+ return;
+ }
+
+ if (machine_is_aquila()) {
+ if (board_is_j1b2())
+ return;
+ }
+
+ if (machine_is_tickertape())
+ return;
+
+ if (machine_is_cypress())
+ i2c_set_bus_num(I2C_GPIO7);
+ else
+ i2c_set_bus_num(I2C_GPIO3);
+
+ if (i2c_probe(addr)) {
+ printf("Can't found max17040 fuel gauge\n");
+ return;
+ }
+
+ i2c_read(addr, 0x04, 1, val, 1);
+
+ dprintf("battery:\t%d%%\n", val[0]);
+
+ battery_soc = val[0];
+}
+
+static void check_mhl(void)
+{
+ unsigned char val[2];
+ unsigned char addr = 0x39; /* SIL9230 */
+
+ /* MHL Power enable */
+ /* HDMI_EN : GPJ2[2] XMSMDATA_2 output mode */
+ gpio_direction_output(&s5pc110_gpio->gpio_j2, 2, 1);
+
+ /* MHL_RST : MP0_4[7] XM0ADDR_7 output mode */
+ gpio_direction_output(&s5pc110_gpio->gpio_mp0_4, 7, 0);
+
+ /* 10ms required after reset */
+ udelay(10000);
+
+ /* output enable */
+ gpio_set_value(&s5pc110_gpio->gpio_mp0_4, 7, 1);
+
+ i2c_set_bus_num(I2C_GPIO5);
+
+ /* set usb path */
+ if (i2c_probe(addr)) {
+ printf("Can't found MHL Chip\n");
+ return;
+ }
+
+ /*
+ * System Control #1
+ * set to Normal operation
+ */
+ val[0] = 0x35;
+ i2c_write((0x72 >> 1), 0x08, 1, val, 1);
+ i2c_read((0x72 >> 1), 0x08, 1, val, 1);
+
+ /*
+ * MHL TX Control #1
+ * TERM_MODE [7:6]
+ * 00 = MHL termination ON
+ * 11 = MHL termination OFF
+ */
+ val[0] = 0xd0;
+ i2c_write((0x72 >> 1), 0xa0, 1, val, 1);
+ i2c_read((0x72 >> 1), 0xa0, 1, val, 1);
+}
+
+static void into_charge_mode(void)
+{
+ unsigned char addr = 0xCC >> 1; /* max8998 */;
+ unsigned char val[2];
+ unsigned int level;
+ int i, j;
+
+ i2c_set_bus_num(I2C_PMIC);
+
+ if (i2c_probe(addr)) {
+ printf("Can't found max8998\n");
+ return;
+ }
+
+ printf("Charge Mode\n");
+
+ i2c_read(addr, 0x0C, 1, val, 1);
+ val[0] &= ~(0x7 << 0);
+ val[0] |= 5; /* 600mA */
+ i2c_write(addr, 0x0C, 1, val, 1);
+
+#ifdef CONFIG_S5PC1XXFB
+ /* TODO: change to Image animation */
+ init_font();
+ set_font_xy(0, 0);
+ set_font_color(FONT_WHITE);
+ fb_printf("charging");
+
+ level = battery_soc / 25;
+
+ for (i = 0; i < 3; i++) {
+ if (level == 0)
+ udelay(1 * 1000 * 1000);
+
+ for (j = 0; j < 4; j++) {
+ fb_printf("..");
+
+ if (j >= level)
+ udelay(1 * 1000 * 1000);
+ }
+
+ if (level <= 4)
+ udelay(1 * 1000 * 1000);
+
+ set_font_xy(0, 0);
+ set_font_color(FONT_XOR);
+ fb_printf("charging........");
+
+ set_font_xy(0, 0);
+ set_font_color(FONT_WHITE);
+ fb_printf("charging");
+ }
+
+ exit_font();
+#endif
+
+ /* EVT0: sleep 1, EVT1: sleep */
+ if (s5pc1xx_get_cpu_rev() == 0) {
+ run_command("sleep 1", 0);
+ return;
+ }
+
+ run_command("sleep", 0);
+}
+
+static void check_micro_usb(int intr)
+{
+ unsigned char addr;
+ unsigned char val[2];
+
+ if (cpu_is_s5pc100())
+ return;
+
+ if (board_is_limo_real()) {
+ if (hwrevision(0) || hwrevision(1))
+ return;
+ }
+
+ if (machine_is_cypress())
+ i2c_set_bus_num(I2C_GPIO6);
+ else
+ i2c_set_bus_num(I2C_PMIC);
+
+ addr = 0x25; /* fsa9480 */
+ if (i2c_probe(addr)) {
+ printf("Can't found fsa9480\n");
+ return;
+ }
+
+ /* Clear Interrupt */
+ if (intr) {
+ i2c_read(addr, 0x03, 1, val, 2);
+ udelay(500 * 1000);
+ }
+
+ /* Read Device Type 1 */
+ i2c_read(addr, 0x0a, 1, val, 1);
+
+#define FSA_DEDICATED_CHARGER (1 << 6)
+#define FSA_UART (1 << 3)
+#define FSA_USB (1 << 2)
+
+ /*
+ * If USB, use default 475mA
+ * If Charger, use 600mA and go to charge mode
+ */
+ if (val[0] & FSA_DEDICATED_CHARGER)
+ into_charge_mode();
+
+ /* If Factory Mode is Boot ON-USB, go to download mode */
+ i2c_read(addr, 0x07, 1, val, 1);
+
+#define FSA_ADC_FAC_USB 0x19
+#define FSA_ADC_FAC_UART 0x1d
+
+ if (val[0] == FSA_ADC_FAC_USB)
+ setenv("bootcmd", "usbdown");
+}
+
+#define MAX8998_REG_ONOFF1 0x11
+#define MAX8998_REG_ONOFF2 0x12
+#define MAX8998_REG_ONOFF3 0x13
+#define MAX8998_LDO3 (1 << 2)
+#define MAX8998_LDO10 (1 << 3)
+#define MAX8998_LDO11 (1 << 2)
+#define MAX8998_LDO12 (1 << 1)
+#define MAX8998_LDO13 (1 << 0)
+#define MAX8998_LDO14 (1 << 7)
+#define MAX8998_LDO15 (1 << 6)
+#define MAX8998_LDO16 (1 << 5)
+#define MAX8998_LDO17 (1 << 4)
+
+static void init_pmic(void)
+{
+ unsigned char addr;
+ unsigned char val[2];
+
+ if (cpu_is_s5pc100())
+ return;
+
+ i2c_set_bus_num(I2C_PMIC);
+
+ addr = 0xCC >> 1; /* max8998 */
+ if (i2c_probe(addr)) {
+ printf("Can't found max8998\n");
+ return;
+ }
+
+ /* ONOFF1 */
+ i2c_read(addr, MAX8998_REG_ONOFF1, 1, val, 1);
+ val[0] &= ~MAX8998_LDO3;
+ i2c_write(addr, MAX8998_REG_ONOFF1, 1, val, 1);
+
+ /* ONOFF2 */
+ i2c_read(addr, MAX8998_REG_ONOFF2, 1, val, 1);
+ /*
+ * Disable LDO10(VPLL_1.1V), LDO11(CAM_IO_2.8V),
+ * LDO12(CAM_ISP_1.2V), LDO13(CAM_A_2.8V)
+ */
+ val[0] &= ~(MAX8998_LDO10 | MAX8998_LDO11 |
+ MAX8998_LDO12 | MAX8998_LDO13);
+ val[0] |= (1 << 7);
+ i2c_write(addr, MAX8998_REG_ONOFF2, 1, val, 1);
+ i2c_read(addr, MAX8998_REG_ONOFF2, 1, val, 1);
+ /* ONOFF3 */
+ i2c_read(addr, MAX8998_REG_ONOFF3, 1, val, 1);
+ /*
+ * Disable LDO14(CAM_CIF_1.8), LDO15(CAM_AF_3.3V),
+ * LDO16(VMIPI_1.8V), LDO17(CAM_8M_1.8V)
+ */
+ val[0] &= ~(MAX8998_LDO14 | MAX8998_LDO15 |
+ MAX8998_LDO16 | MAX8998_LDO17);
+ i2c_write(addr, MAX8998_REG_ONOFF3, 1, val, 1);
+ i2c_read(addr, MAX8998_REG_ONOFF3, 1, val, 1);
+}
+
+#define PDN_MASK(x) (0x3 << ((x) << 1))
+
+#define CON_INPUT(x) (0x0 << ((x) << 2))
+#define CON_OUTPUT(x) (0x1 << ((x) << 2))
+#define CON_IRQ(x) (0xf << ((x) << 2))
+
+#define DAT_SET(x) (0x1 << (x))
+#define DAT_CLEAR(x) (0x0 << (x))
+
+#define OUTPUT0(x) (0x0 << ((x) << 1))
+#define OUTPUT1(x) (0x1 << ((x) << 1))
+#define INPUT(x) (0x2 << ((x) << 1))
+
+#define PULL_DIS(x) (0x0 << ((x) << 1))
+#define PULL_DOWN(x) (0x1 << ((x) << 1))
+#define PULL_UP(x) (0x2 << ((x) << 1))
+
+#define PREVIOUS(x) (0x3 << ((x) << 1))
+
+struct gpio_powermode {
+ unsigned int conpdn;
+ unsigned int pudpdn;
+};
+
+struct gpio_external {
+ unsigned int con;
+ unsigned int dat;
+ unsigned int pud;
+};
+
+static struct gpio_powermode powerdown_modes[] = {
+ { /* S5PC110_GPIO_A0_OFFSET */
+ INPUT(0) | OUTPUT0(1) | INPUT(2) | OUTPUT0(3) |
+ INPUT(4) | OUTPUT0(5) | INPUT(6) | OUTPUT0(7),
+ PULL_DIS(0) | PULL_DIS(1) | PULL_DIS(2) | PULL_DIS(3) |
+ PULL_DIS(4) | PULL_DIS(5) | PULL_DIS(6) | PULL_DIS(7),
+ }, { /* S5PC110_GPIO_A1_OFFSET */
+ INPUT(0) | OUTPUT0(1) | INPUT(2) | INPUT(3),
+ PULL_DIS(0) | PULL_DIS(1) | PULL_DIS(2) | PULL_DIS(3),
+ }, { /* S5PC110_GPIO_B_OFFSET */
+ OUTPUT0(0) | OUTPUT0(1) | OUTPUT0(2) | OUTPUT0(3) |
+ INPUT(4) | OUTPUT0(5) | OUTPUT0(6) | OUTPUT0(7),
+ PULL_DIS(0) | PULL_DIS(1) | PULL_DIS(2) | PULL_DIS(3) |
+ PULL_DIS(4) | PULL_DIS(5) | PULL_DIS(6) | PULL_DIS(7),
+ }, { /* S5PC110_GPIO_C0_OFFSET */
+ OUTPUT0(0) | OUTPUT0(1) | OUTPUT0(2) | INPUT(3) |
+ OUTPUT0(4),
+ PULL_DIS(0) | PULL_DIS(1) | PULL_DIS(2) | PULL_DIS(3) |
+ PULL_DIS(4),
+ }, { /* S5PC110_GPIO_C1_OFFSET */
+ /* OUTPUT0(0) | OUTPUT0(1) | OUTPUT0(2) | OUTPUT0(3) |
+ OUTPUT0(4), */
+ OUTPUT0(0) | OUTPUT0(1) | OUTPUT0(2) | INPUT(3) |
+ OUTPUT0(4),
+ PULL_DIS(0) | PULL_DIS(1) | PULL_DIS(2) | PULL_DIS(3) |
+ PULL_DIS(4),
+ }, { /* S5PC110_GPIO_D0_OFFSET */
+ OUTPUT0(0) | OUTPUT0(1) | OUTPUT0(2) | OUTPUT0(3),
+ PULL_DIS(0) | PULL_DIS(1) | PULL_DIS(2) | PULL_DIS(3),
+ }, { /* S5PC110_GPIO_D1_OFFSET */
+ INPUT(0) | INPUT(1) | INPUT(2) | INPUT(3) |
+ INPUT(4) | INPUT(5),
+ PULL_DIS(0) | PULL_DIS(1) | PULL_DIS(2) | PULL_DIS(3) |
+ PULL_DIS(4) | PULL_DIS(5),
+ }, { /* S5PC110_GPIO_E0_OFFSET */
+ INPUT(0) | INPUT(1) | INPUT(2) | INPUT(3) |
+ INPUT(4) | INPUT(5) | INPUT(6) | INPUT(7),
+ PULL_DOWN(0) | PULL_DOWN(1) | PULL_DOWN(2) | PULL_DOWN(3) |
+ PULL_DOWN(4) | PULL_DOWN(5) | PULL_DOWN(6) | PULL_DOWN(7),
+ }, { /* S5PC110_GPIO_E1_OFFSET */
+ INPUT(0) | INPUT(1) | INPUT(2) | OUTPUT0(3) |
+ OUTPUT0(4),
+ PULL_DOWN(0) | PULL_DOWN(1) | PULL_DOWN(2) | PULL_DIS(3) |
+ PULL_DIS(4),
+ }, { /* S5PC110_GPIO_F0_OFFSET */
+ OUTPUT0(0) | OUTPUT0(1) | OUTPUT0(2) | OUTPUT0(3) |
+ OUTPUT0(4) | OUTPUT0(5) | OUTPUT0(6) | OUTPUT0(7),
+ PULL_DIS(0) | PULL_DIS(1) | PULL_DIS(2) | PULL_DIS(3) |
+ PULL_DIS(4) | PULL_DIS(5) | PULL_DIS(6) | PULL_DIS(7),
+ }, { /* S5PC110_GPIO_F1_OFFSET */
+ OUTPUT0(0) | OUTPUT0(1) | OUTPUT0(2) | OUTPUT0(3) |
+ OUTPUT0(4) | OUTPUT0(5) | OUTPUT0(6) | OUTPUT0(7),
+ PULL_DIS(0) | PULL_DIS(1) | PULL_DIS(2) | PULL_DIS(3) |
+ PULL_DIS(4) | PULL_DIS(5) | PULL_DIS(6) | PULL_DIS(7),
+ }, { /* S5PC110_GPIO_F2_OFFSET */
+ OUTPUT0(0) | OUTPUT0(1) | OUTPUT0(2) | OUTPUT0(3) |
+ OUTPUT0(4) | OUTPUT0(5) | OUTPUT0(6) | OUTPUT0(7),
+ PULL_DIS(0) | PULL_DIS(1) | PULL_DIS(2) | PULL_DIS(3) |
+ PULL_DIS(4) | PULL_DIS(5) | PULL_DIS(6) | PULL_DIS(7),
+ }, { /* S5PC110_GPIO_F3_OFFSET */
+ OUTPUT0(0) | OUTPUT0(1) | OUTPUT0(2) | OUTPUT0(3) |
+ OUTPUT0(4) | OUTPUT0(5),
+ PULL_DIS(0) | PULL_DIS(1) | PULL_DIS(2) | PULL_DIS(3) |
+ PULL_DIS(4) | PULL_DIS(5),
+ }, { /* S5PC110_GPIO_G0_OFFSET */
+ OUTPUT0(0) | OUTPUT0(1) | OUTPUT0(2) | OUTPUT0(3) |
+ OUTPUT0(4) | OUTPUT0(5) | OUTPUT0(6),
+ PULL_DIS(0) | PULL_DIS(1) | PULL_DIS(2) | PULL_DIS(3) |
+ PULL_DIS(4) | PULL_DIS(5) | PULL_DIS(6),
+ }, { /* S5PC110_GPIO_G1_OFFSET */
+ OUTPUT0(0) | INPUT(1) | OUTPUT0(2) | INPUT(3) |
+ INPUT(4) | INPUT(5) | INPUT(6),
+ PULL_DIS(0) | PULL_UP(1) | PULL_DIS(2) | PULL_UP(3) |
+ PULL_UP(4) | PULL_UP(5) | PULL_UP(6),
+ }, { /* S5PC110_GPIO_G2_OFFSET */
+ OUTPUT0(0) | OUTPUT0(1) | OUTPUT0(2) | OUTPUT0(3) |
+ OUTPUT0(4) | OUTPUT0(5) | OUTPUT0(6),
+ PULL_DIS(0) | PULL_DIS(1) | PULL_DIS(2) | PULL_DIS(3) |
+ PULL_DIS(4) | PULL_DIS(5) | PULL_DIS(6),
+ }, { /* S5PC110_GPIO_G3_OFFSET */
+ OUTPUT0(0) | OUTPUT0(1) | OUTPUT1(2) | INPUT(3) |
+ OUTPUT0(4) | OUTPUT0(5) | OUTPUT0(6),
+ PULL_DIS(0) | PULL_DIS(1) | PULL_DIS(2) | PULL_DIS(3) |
+ PULL_DIS(4) | PULL_DIS(5) | PULL_DIS(6),
+ }, { /* S5PC110_GPIO_I_OFFSET */
+ OUTPUT0(0) | OUTPUT0(1) | OUTPUT0(2) | INPUT(3) |
+ OUTPUT0(4) | OUTPUT0(5) | OUTPUT0(6),
+ PULL_DIS(0) | PULL_DIS(1) | PULL_DIS(2) | PULL_DIS(3) |
+ PULL_DIS(4) | PULL_DIS(5) | PULL_DIS(6),
+ }, { /* S5PC110_GPIO_J0_OFFSET */
+ INPUT(0) | OUTPUT0(1) | INPUT(2) | INPUT(3) |
+ INPUT(4) | INPUT(5) | OUTPUT0(6) | OUTPUT0(7),
+ PULL_DOWN(0) | PULL_DIS(1) | PULL_DIS(2) | PULL_DIS(3) |
+ PULL_DIS(4) | PULL_DIS(5) | PULL_DIS(6) | PULL_DIS(7),
+ }, { /* S5PC110_GPIO_J1_OFFSET */
+ OUTPUT0(0) | OUTPUT0(1) | OUTPUT0(2) | OUTPUT0(3) |
+ OUTPUT0(4) | OUTPUT0(5) | OUTPUT0(6) | OUTPUT0(7),
+ PULL_DIS(0) | PULL_DIS(1) | PULL_DIS(2) | PULL_DIS(3) |
+ PULL_DIS(4) | PULL_DIS(5) | PULL_DIS(6) | PULL_DIS(7),
+ }, { /* S5PC110_GPIO_J2_OFFSET */
+ OUTPUT0(0) | OUTPUT0(1) | OUTPUT0(2) | OUTPUT0(3) |
+ INPUT(4) | OUTPUT0(5) | INPUT(6) | INPUT(7),
+ PULL_DIS(0) | PULL_DIS(1) | PULL_DIS(2) | PULL_DIS(3) |
+ PULL_DIS(4) | PULL_DIS(5) | PULL_DOWN(6) | PULL_DOWN(7),
+ }, { /* S5PC110_GPIO_J3_OFFSET */
+ INPUT(0) | INPUT(1) | OUTPUT0(2) | OUTPUT0(3) |
+ OUTPUT1(4) | OUTPUT0(5) | INPUT(6) | INPUT(7),
+ PULL_DOWN(0) | PULL_DOWN(1) | PULL_DIS(2) | PULL_DIS(3) |
+ PULL_DIS(4) | PULL_DIS(5) | PULL_DIS(6) | PULL_DIS(7),
+ }, { /* S5PC110_GPIO_J4_OFFSET */
+ INPUT(0) | OUTPUT0(1) | OUTPUT0(2) | INPUT(3) |
+ OUTPUT0(4),
+ PULL_DIS(0) | PULL_DIS(1) | PULL_DIS(2) | PULL_DIS(3) |
+ PULL_DIS(4),
+ }, { /* S5PC110_MP0_1_OFFSET */
+ /* XM0CSN[4]: MP0_1[4] -> output high */
+ OUTPUT0(0) | OUTPUT0(1) | OUTPUT1(2) | OUTPUT0(3) |
+ OUTPUT1(4) | OUTPUT0(5) | OUTPUT1(6) | OUTPUT1(7),
+ PULL_DIS(0) | PULL_DIS(1) | PULL_DIS(2) | PULL_DIS(3) |
+ PULL_DIS(4) | PULL_DIS(5) | PULL_DIS(6) | PULL_DIS(7),
+ }, { /* S5PC110_MP0_2_OFFSET */
+ OUTPUT0(0) | OUTPUT0(1) | INPUT(2) | OUTPUT0(3),
+ PULL_DIS(0) | PULL_DIS(1) | PULL_DIS(2) | PULL_DIS(3),
+ }, { /* S5PC110_MP0_3_OFFSET */
+ /* XM0FWEN: MP0_3[2] -> output high */
+ OUTPUT0(0) | OUTPUT0(1) | OUTPUT1(2) | OUTPUT0(3) |
+ INPUT(4) | OUTPUT0(5) | OUTPUT0(6) | OUTPUT0(7),
+ PULL_DIS(0) | PULL_DIS(1) | PULL_DIS(2) | PULL_DIS(3) |
+ PULL_DIS(4) | PULL_DIS(5) | PULL_DIS(6) | PULL_DIS(7),
+ }, { /* S5PC110_MP0_4_OFFSET */
+ OUTPUT0(0) | OUTPUT0(1) | OUTPUT0(2) | INPUT(3) |
+ INPUT(4) | OUTPUT0(5) | OUTPUT0(6) | OUTPUT0(7),
+ PULL_DIS(0) | PULL_DIS(1) | PULL_DIS(2) | PULL_DOWN(3) |
+ PULL_DOWN(4) | PULL_DIS(5) | PULL_DIS(6) | PULL_DIS(7),
+ }, { /* S5PC110_MP0_5_OFFSET */
+ INPUT(0) | OUTPUT0(1) | INPUT(2) | INPUT(3) |
+ OUTPUT0(4) | OUTPUT0(5) | OUTPUT0(6) | OUTPUT0(7),
+ PULL_DOWN(0) | PULL_DIS(1) | PULL_DIS(2) | PULL_DIS(3) |
+ PULL_DIS(4) | PULL_DIS(5) | PULL_DIS(6) | PULL_DIS(7),
+ }, { /* S5PC110_MP0_6_OFFSET */
+ OUTPUT0(0) | OUTPUT0(1) | OUTPUT0(2) | OUTPUT0(3) |
+ OUTPUT0(4) | OUTPUT0(5) | OUTPUT0(6) | OUTPUT0(7),
+ PULL_DIS(0) | PULL_DIS(1) | PULL_DIS(2) | PULL_DIS(3) |
+ PULL_DIS(4) | PULL_DIS(5) | PULL_DIS(6) | PULL_DIS(7),
+ }, { /* S5PC110_MP0_7_OFFSET */
+ OUTPUT0(0) | OUTPUT0(1) | OUTPUT0(2) | OUTPUT0(3) |
+ OUTPUT0(4) | OUTPUT0(5) | OUTPUT0(6) | OUTPUT0(7),
+ PULL_DIS(0) | PULL_DIS(1) | PULL_DIS(2) | PULL_DIS(3) |
+ PULL_DIS(4) | PULL_DIS(5) | PULL_DIS(6) | PULL_DIS(7),
+ },
+};
+
+static struct gpio_external external_powerdown_modes[] = {
+ { /* S5PC110_GPIO_H0_OFFSET */
+ CON_OUTPUT(0) | CON_INPUT(1) | CON_OUTPUT(2) | CON_OUTPUT(3) |
+ CON_OUTPUT(4) | CON_OUTPUT(5) | CON_INPUT(6) | CON_INPUT(7),
+ DAT_SET(0) | DAT_CLEAR(2) | DAT_CLEAR(3) |
+ DAT_CLEAR(4) | DAT_CLEAR(5),
+ PULL_DIS(0) | PULL_DIS(1) | PULL_DIS(2) | PULL_DIS(3) |
+ PULL_DIS(4) | PULL_DIS(5),
+ }, { /* S5PC110_GPIO_H1_OFFSET */
+ /* CON_INPUT(0) | CON_INPUT(1) | CON_OUTPUT(2) | CON_IRQ(3) |
+ CON_IRQ(4) | CON_INPUT(5) | CON_INPUT(6) | CON_INPUT(7),
+ DAT_CLEAR(2),
+ PULL_DOWN(0) | PULL_DOWN(1) |
+ PULL_DOWN(6), */
+ CON_INPUT(0) | CON_INPUT(1) | CON_OUTPUT(2) | CON_IRQ(3) |
+ CON_INPUT(4) | CON_INPUT(5) | CON_OUTPUT(6) | CON_INPUT(7),
+ DAT_SET(0),
+ PULL_DIS(0) | PULL_DIS(1) | PULL_DIS(2) | PULL_DIS(3) |
+ PULL_DOWN(4),
+ }, { /* S5PC110_GPIO_H2_OFFSET */
+ CON_OUTPUT(0) | CON_OUTPUT(1) | CON_OUTPUT(2) | CON_OUTPUT(3) |
+ CON_IRQ(4) | CON_IRQ(5) | CON_IRQ(6) | CON_IRQ(7),
+ DAT_CLEAR(0) | DAT_CLEAR(1) | DAT_CLEAR(2) | DAT_CLEAR(3),
+ 0,
+ }, { /* S5PC110_GPIO_H3_OFFSET */
+ CON_IRQ(0) | CON_IRQ(1) | CON_IRQ(2) | CON_OUTPUT(3) |
+ CON_IRQ(4) | CON_INPUT(5) | CON_IRQ(6) | CON_OUTPUT(7),
+ DAT_CLEAR(3) | DAT_CLEAR(7),
+ 0,
+ },
+};
+
+static void setup_power_down_mode_registers(void)
+{
+ struct s5pc110_gpio *gpio = (struct s5pc110_gpio *)S5PC110_GPIO_BASE;
- struct s5pc1xx_gpio_bank *bank;
++ struct s5p_gpio_bank *bank;
+ struct gpio_powermode *p;
+ struct gpio_external *ge;
+ int i;
+
+ if (cpu_is_s5pc100())
+ return;
+
+ if (!(machine_is_aquila() && board_is_limo_real()))
+ return;
+
+ bank = &gpio->gpio_a0;
+ p = powerdown_modes;
+
+ for (i = 0; i < ARRAY_SIZE(powerdown_modes); i++, p++, bank++) {
+ writel(p->conpdn, &bank->pdn_con);
+ writel(p->pudpdn, &bank->pdn_pull);
+ }
+ /* M299 */
+ writel(0xff0022b0, (unsigned int *)0xF0000000);
+ writel(0xff0022b0, (unsigned int *)0xF1400000);
+
+
+ bank = &gpio->gpio_h0;
+ ge = external_powerdown_modes;
+
+ for (i = 0; i < ARRAY_SIZE(external_powerdown_modes); i++) {
+ writel(ge->con, &bank->con);
+ writel(ge->dat, &bank->dat);
+ writel(ge->pud, &bank->pull);
+
+ bank++;
+ ge++;
+ }
+}
+
+#ifdef CONFIG_LCD
+struct s6e63m0_platform_data {
++ struct s5p_gpio_bank *bank;
+ unsigned int num;
+};
+
+extern void s6e63m0_set_spi_interface(struct s6e63m0_platform_data *cs,
+ struct s6e63m0_platform_data *clk, struct s6e63m0_platform_data *si,
+ struct s6e63m0_platform_data *so);
+
+struct s6e63m0_platform_data pd_cs, pd_clk, pd_si, pd_so;
+struct s5pc110_gpio *gpio_base = (struct s5pc110_gpio *) S5PC110_GPIO_BASE;
+
+int s5p_no_lcd_support(void)
+{
+ return 0;
+}
+
+
+void lcd_cfg_gpio(void)
+{
+ unsigned int i, f3_end = 4;
+
+ for (i = 0; i < 8; i++) {
+ /* set GPF0,1,2[0:7] for RGB Interface and Data lines (32bit) */
+ gpio_cfg_pin(&gpio_base->gpio_f0, i, GPIO_FUNC(2));
+ gpio_cfg_pin(&gpio_base->gpio_f1, i, GPIO_FUNC(2));
+ gpio_cfg_pin(&gpio_base->gpio_f2, i, GPIO_FUNC(2));
+ /* pull-up/down disable */
+ gpio_set_pull(&gpio_base->gpio_f0, i, GPIO_PULL_NONE);
+ gpio_set_pull(&gpio_base->gpio_f1, i, GPIO_PULL_NONE);
+ gpio_set_pull(&gpio_base->gpio_f2, i, GPIO_PULL_NONE);
+
+ /* drive strength to max (24bit) */
+ gpio_set_drv(&gpio_base->gpio_f0, i, GPIO_DRV_4X);
+ gpio_set_rate(&gpio_base->gpio_f0, i, GPIO_DRV_SLOW);
+ gpio_set_drv(&gpio_base->gpio_f1, i, GPIO_DRV_4X);
+ gpio_set_rate(&gpio_base->gpio_f1, i, GPIO_DRV_SLOW);
+ gpio_set_drv(&gpio_base->gpio_f2, i, GPIO_DRV_4X);
+ gpio_set_rate(&gpio_base->gpio_f2, i, GPIO_DRV_SLOW);
+ }
+
+ /* set DISPLAY_DE_B pin for dual rgb mode. */
+ if (board_is_media())
+ f3_end = 5;
+
+ for (i = 0; i < f3_end; i++) {
+ /* set GPF3[0:3] for RGB Interface and Data lines (32bit) */
+ gpio_cfg_pin(&gpio_base->gpio_f3, i, GPIO_PULL_UP);
+ /* pull-up/down disable */
+ gpio_set_pull(&gpio_base->gpio_f3, i, GPIO_PULL_NONE);
+ /* drive strength to max (24bit) */
+ gpio_set_drv(&gpio_base->gpio_f3, i, GPIO_DRV_4X);
+ gpio_set_rate(&gpio_base->gpio_f3, i, GPIO_DRV_SLOW);
+ }
+ /* display output path selection (only [1:0] valid) */
+ writel(0x2, 0xE0107008);
+
+ /* gpio pad configuration for LCD reset. */
+ gpio_cfg_pin(&gpio_base->gpio_mp0_5, 5, GPIO_OUTPUT);
+
+ /* gpio pad configuration for LCD ON. */
+ gpio_cfg_pin(&gpio_base->gpio_j1, 3, GPIO_OUTPUT);
+
+ /* MLCD_ON2 */
+
+ if (board_is_p2_real())
+ gpio_cfg_pin(&gpio_base->gpio_j1, 4, GPIO_OUTPUT);
+ else
+ gpio_cfg_pin(&gpio_base->gpio_j2, 6, GPIO_OUTPUT);
+
+ /* LCD_BACKLIGHT_EN */
+ if (machine_is_geminus())
+ gpio_cfg_pin(&gpio_base->gpio_mp0_5, 0, GPIO_OUTPUT);
+
+ /*
+ * gpio pad configuration for
+ * DISPLAY_CS, DISPLAY_CLK, DISPLAY_SO, DISPLAY_SI.
+ */
+ gpio_cfg_pin(&gpio_base->gpio_mp0_1, 1, GPIO_OUTPUT);
+ gpio_cfg_pin(&gpio_base->gpio_mp0_4, 1, GPIO_OUTPUT);
+ gpio_cfg_pin(&gpio_base->gpio_mp0_4, 2, GPIO_INPUT);
+ gpio_cfg_pin(&gpio_base->gpio_mp0_4, 3, GPIO_OUTPUT);
+
+ if (machine_is_aquila()) {
+ pd_cs.bank = &gpio_base->gpio_mp0_1;
+ pd_cs.num = 1;
+ pd_clk.bank = &gpio_base->gpio_mp0_4;
+ pd_clk.num = 1;
+ pd_si.bank = &gpio_base->gpio_mp0_4;
+ pd_si.num = 3;
+ pd_so.bank = &gpio_base->gpio_mp0_4;
+ pd_so.num = 2;
+
+ /* these data would be sent to s6e63m0 lcd panel driver. */
+ //s6e63m0_set_spi_interface(&pd_cs, &pd_clk, &pd_si, &pd_so);
+ }
+
+ if (machine_is_cypress()) {
+ /* FLCD_CS */
+ gpio_cfg_pin(&gpio_base->gpio_mp0_1, 0, GPIO_OUTPUT);
+ /* FLCD_CLK */
+ gpio_cfg_pin(&gpio_base->gpio_mp0_4, 0, GPIO_OUTPUT);
+ /* FLCD_SDI */
+ gpio_cfg_pin(&gpio_base->gpio_mp0_4, 2, GPIO_OUTPUT);
+ /* FLCD_RST_S */
+ gpio_cfg_pin(&gpio_base->gpio_mp0_4, 5, GPIO_OUTPUT);
+ /* FLCD_ON_S */
+ gpio_cfg_pin(&gpio_base->gpio_g2, 2, GPIO_OUTPUT);
+
+ pd_cs.bank = &gpio_base->gpio_mp0_1;
+ pd_cs.num = 0;
+ pd_clk.bank = &gpio_base->gpio_mp0_4;
+ pd_clk.num = 0;
+ pd_si.bank = &gpio_base->gpio_mp0_4;
+ pd_si.num = 2;
+
+ /* these data would be sent to s6e63m0 lcd panel driver. */
+ //s6e63m0_set_spi_interface(&pd_cs, &pd_clk, &pd_si, NULL);
+ }
+
+ return;
+}
+
+void backlight_on(unsigned int onoff)
+{
+ struct s5pc110_gpio *gpio = (struct s5pc110_gpio *) S5PC110_GPIO_BASE;
+
+ if (onoff) {
+ if (machine_is_geminus())
+ gpio_set_value(&gpio->gpio_mp0_5, 0, 1);
+ } else {
+ if (machine_is_geminus())
+ gpio_set_value(&gpio->gpio_mp0_5, 0, 0);
+ }
+}
+
+void reset_lcd(void)
+{
+ struct s5pc110_gpio *gpio = (struct s5pc110_gpio *) S5PC110_GPIO_BASE;
+
+ if (machine_is_aquila() || machine_is_geminus())
+ gpio_set_value(&gpio->gpio_mp0_5, 5, 1);
+ if (machine_is_cypress())
+ gpio_set_value(&gpio->gpio_mp0_4, 5, 1);
+ if (machine_is_p1p2())
+ {
+ /* set gpio pin for DISPLAY_CS to HIGH */
+ gpio_set_value(&gpio->gpio_mp0_1, 1, 1);
+ /* set gpio pin for DISPLAY_CLK to HIGH */
+ gpio_set_value(&gpio->gpio_mp0_4, 1, 1);
+ /* set gpio pin for DISPLAY_SI to HIGH */
+ gpio_set_value(&gpio->gpio_mp0_4, 3, 1);
+ }
+}
+void lcd_set_RST(void)
+{
+ struct s5pc110_gpio *gpio = (struct s5pc110_gpio *) S5PC110_GPIO_BASE;
+
+ gpio_set_value(&gpio->gpio_mp0_5, 5, 1);
+ udelay(1400000);
+ gpio_set_value(&gpio->gpio_mp0_5, 5, 0);
+ udelay(500000);
+ gpio_set_value(&gpio->gpio_mp0_5, 5, 1);
+ udelay(1000000);
+}
+
+void lcd_power_on(unsigned int onoff)
+{
+ struct s5pc110_gpio *gpio = (struct s5pc110_gpio *) S5PC110_GPIO_BASE;
+
+ if (onoff) {
+ if (machine_is_aquila() || machine_is_geminus() || machine_is_p1p2())
+ {
+ gpio_set_value(&gpio->gpio_j1, 3, 1);
+ udelay(5000);
+ }
+
+ if (machine_is_cypress())
+ gpio_set_value(&gpio->gpio_g2, 2, 1);
+
+ if (board_is_p2_real())
+ gpio_set_value(&gpio->gpio_j1, 4, 1);
+ else if (machine_is_p1p2())
+ {
+ gpio_set_value(&gpio->gpio_j2, 6, 1);
+ udelay(5000);
+ lcd_set_RST();
+ }
+ else
+ gpio_set_value(&gpio->gpio_j2, 6, 1);
+
+ } else {
+ if (machine_is_aquila() || machine_is_geminus() || machine_is_p1p2())
+ gpio_set_value(&gpio->gpio_j1, 3, 0);
+
+ if (machine_is_cypress())
+ gpio_set_value(&gpio->gpio_g2, 2, 0);
+
+ if (board_is_p2_real())
+ gpio_set_value(&gpio->gpio_j1, 4, 0);
+ else if (machine_is_p1p2())
+ gpio_set_value(&gpio->gpio_j2, 6, 0);
+ }
+}
+
+extern void ams701ka_cfg_ldo(void);
+extern void ams701ka_enable_ldo(unsigned int onoff);
+
+void init_panel_info(vidinfo_t *vid)
+{
+ vid->cfg_gpio = NULL;
+ vid->reset_lcd = NULL;
+ vid->backlight_on = NULL;
+ vid->lcd_power_on = NULL;
+
+ vid->cfg_ldo = NULL;
+ vid->enable_ldo = NULL;
+
+ vid->init_delay = 0;
+ vid->reset_delay = 0;
+ vid->power_on_delay = 0;
+
+ vid->dual_lcd_enabled = 0;
+
+ vid->vl_freq = 40;
+ vid->vl_col = 1024,
+ vid->vl_row = 600,
+ vid->vl_width = 1024,
+ vid->vl_height = 600,
+ vid->vl_clkp = CONFIG_SYS_HIGH,
+ vid->vl_hsp = CONFIG_SYS_HIGH,
+ vid->vl_vsp = CONFIG_SYS_HIGH,
+ vid->vl_dp = CONFIG_SYS_LOW,
+ vid->vl_bpix = 32,
+
+ /* AMS701KA AMOLED Panel. */
+ vid->vl_hspw = 30,
+ vid->vl_hbpd = 114,
+ vid->vl_hfpd = 48,
+
+ vid->vl_vspw = 2,
+ vid->vl_vbpd = 6,
+ vid->vl_vfpd = 8,
+
+ vid->cfg_gpio = lcd_cfg_gpio;
+ vid->reset_lcd = reset_lcd;
+ vid->backlight_on = backlight_on;
+ vid->lcd_power_on = lcd_power_on;
+
+ vid->cfg_ldo = ams701ka_cfg_ldo;
+ vid->enable_ldo = ams701ka_enable_ldo;
+
+ vid->init_delay = 25000;
+ vid->reset_delay = 120000;
+
+#if 0
+ vid->vl_freq = 60;
+ vid->vl_col = 480,
+ vid->vl_row = 800,
+ vid->vl_width = 480,
+ vid->vl_height = 800,
+ vid->vl_clkp = CONFIG_SYS_HIGH,
+ vid->vl_hsp = CONFIG_SYS_LOW,
+ vid->vl_vsp = CONFIG_SYS_LOW,
+ vid->vl_dp = CONFIG_SYS_HIGH,
+ vid->vl_bpix = 32,
+
+ /* tl2796 panel. */
+ vid->vl_hpw = 4,
+ vid->vl_blw = 8,
+ vid->vl_elw = 8,
+
+ vid->vl_vpw = 4,
+ vid->vl_bfw = 8,
+ vid->vl_efw = 8,
+#endif
+#if 0
+ vid->vl_freq = 60;
+ vid->vl_col = 1024,
+ vid->vl_row = 600,
+ vid->vl_width = 1024,
+ vid->vl_height = 600,
+ vid->vl_clkp = CONFIG_SYS_HIGH,
+ vid->vl_hsp = CONFIG_SYS_HIGH,
+ vid->vl_vsp = CONFIG_SYS_HIGH,
+ vid->vl_dp = CONFIG_SYS_LOW,
+ vid->vl_bpix = 32,
+
+ /* AMS701KA AMOLED Panel. */
+ vid->vl_hpw = 30,
+ vid->vl_blw = 114,
+ vid->vl_elw = 48,
+
+ vid->vl_vpw = 2,
+ vid->vl_bfw = 6,
+ vid->vl_efw = 8,
+#endif
+}
+#endif
+
+static void setup_meminfo(void)
+{
+ char meminfo[64] = {0, };
+ int count = 0, size, real;
+
+ size = gd->bd->bi_dram[0].size >> 20;
+ count += sprintf(meminfo + count, "mem=%dM", size);
+
+ /* Each Chip Select can't exceed the 256MiB */
+ size = gd->bd->bi_dram[1].size >> 20;
+ real = min(size, 256);
+ count += sprintf(meminfo + count, " mem=%dM@0x%x",
+ real, (unsigned int)gd->bd->bi_dram[1].start);
+
+ size -= real;
+ if (size > 0) {
+ count += sprintf(meminfo + count, " mem=%dM@0x%x", size,
+ (unsigned int)gd->bd->bi_dram[1].start + (real << 20));
+ }
+
+ setenv("meminfo", meminfo);
+}
+
+int misc_init_r(void)
+{
+#ifdef CONFIG_LCD
+ /* It should be located at first */
+ lcd_is_enabled = 0;
+
+ if (board_is_limo_real() ||
+ board_is_limo_universal() ||
+ board_is_j1b2())
+ setenv("lcdinfo", "lcd=s6e63m0");
+ /* it can't classify tl2796 with single-lcd and dual-lcd.
+ else
+ setenv("lcdinfo", "lcd=tl2796-dual");
+ */
+
+ /*
+ * env values below should be added in case that lcd panel of geminus,
+ * p1 and p2 are enabled at u-boot.
+ * setenv means that lcd panel has been turned on at u-boot.
+ */
+ if (machine_is_geminus())
+ setenv("lcdinfo", "lcd=lms480jc01");
+
+ if (board_is_p2_real()) {
+ setenv("lcdinfo", "lcd=ams701");
+ } else if(lcd_is_amoled()) {
+ setenv("lcdinfo", "lcd=ams701");
+ }
+
+#endif
+ setup_meminfo();
+
+ show_hw_revision();
+
+ /* Set proper PMIC pins */
+ pmic_pin_init();
+
+ /* Check auto burning */
+ check_auto_burn();
+
+ /* To power up I2C2 */
+ enable_ldos();
+
+ /* Enable T-Flash at Limo Real or Limo Universal */
+ enable_t_flash();
+
+ /* Setup Limo Real board GPIOs */
+ setup_limo_real_gpios();
+
+ /* Setup Media board GPIOs */
+ setup_media_gpios();
+
+ /* Setup P1P2 board GPIOS */
+ setup_p1p2_gpios();
+
+ /* To usbdown automatically */
+ if (board_is_p2_real())
+ check_p2_keypad();
+ else
+ check_keypad();
+
+ /* check max8998 */
+ init_pmic();
+
+#ifdef CONFIG_S5PC1XXFB
+ display_device_info();
+#endif
+
+ setup_power_down_mode_registers();
+
+ /* check max17040 */
+ check_battery();
+
+ /* check fsa9480 */
+ check_micro_usb(0);
+
+ return 0;
+}
+#endif
+
+int board_init(void)
+{
+ /* Set Initial global variables */
+ s5pc110_gpio = (struct s5pc110_gpio *) S5PC110_GPIO_BASE;
+
+ gd->bd->bi_arch_number = MACH_TYPE;
+ gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100;
+
+ /* Check H/W Revision */
+ check_hw_revision();
+
+ return 0;
+}
+
+int dram_init(void)
+{
+ unsigned int base, memconfig0, size;
+ unsigned int memconfig1, sz = 0;
+
+ if (cpu_is_s5pc100()) {
+ /* In mem setup, we swap the bank. So below size is correct */
+ gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
+ gd->bd->bi_dram[0].size = PHYS_SDRAM_2_SIZE;
+ gd->bd->bi_dram[1].start = S5PC100_PHYS_SDRAM_2;
+ size = 128;
+ } else {
+ /* In S5PC110, we can't swap the DMC0/1 */
+ gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
+ gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
+
+ base = S5PC110_DMC1_BASE;
+ /* DMC configuration */
+ memconfig0 = readl(base + MEMCONFIG0_OFFSET);
+ gd->bd->bi_dram[1].start = memconfig0 & 0xFF000000;
+
+ size = (memconfig0 >> 16) & 0xFF;
+ size = ((unsigned char) ~size) + 1;
+
+ /*
+ * (0x07 + 1) * 16 = 128 MiB
+ * (0x0f + 1) * 16 = 256 MiB
+ */
+ size = size << 4;
+
+ /*
+ * Aquila Rev0.5 4G3G1G
+ * Aquila Rev0.8 4G3G1G
+ */
+ if (machine_is_aquila() && (hwrevision(5) || hwrevision(8))) {
+ memconfig1 = readl(base + MEMCONFIG1_OFFSET);
+
+ sz = (memconfig1 >> 16) & 0xFF;
+ sz = ((unsigned char) ~sz) + 1;
+ sz = sz << 4;
+ }
+
+ }
+ /*
+ * bi_dram[1].size contains all DMC1 memory size
+ */
+ gd->bd->bi_dram[1].size = (size + sz) << 20;
+
+ return 0;
+}
+
+/* Used for sleep test */
+static unsigned char saved_val[4][2];
+void board_sleep_init_late(void)
+{
+ /* CODEC_LDO_EN: GPF3[4] */
+ gpio_direction_output(&s5pc110_gpio->gpio_f3, 4, 0);
+ /* CODEC_XTAL_EN: GPH3[2] */
+ gpio_direction_output(&s5pc110_gpio->gpio_h3, 2, 0);
+
+ /* MMC T_FLASH off */
+ gpio_direction_output(&s5pc110_gpio->gpio_mp0_5, 4, 0);
+ /* MHL off */
+ gpio_direction_output(&s5pc110_gpio->gpio_j2, 2, 0);
+ gpio_direction_output(&s5pc110_gpio->gpio_mp0_4, 7, 0);
+ gpio_direction_output(&s5pc110_gpio->gpio_j2, 3, 0); /* MHL_ON for REV02 or higher */
+
+
+}
+void board_sleep_init(void)
+{
+ unsigned char addr;
+ unsigned char val[2];
+
+ i2c_set_bus_num(I2C_PMIC);
+ addr = 0xCC >> 1;
+ if (i2c_probe(addr)) {
+ printf("Can't find max8998\n");
+ return;
+ }
+
+ /* Set ONOFF1 */
+ i2c_read(addr, MAX8998_REG_ONOFF1, 1, val, 1);
+ saved_val[0][0] = val[0];
+ saved_val[0][1] = val[1];
+ val[0] &= ~((1 << 7) | (1 << 6) | (1 << 4) | (1 << 2) |
+ (1 << 1) | (1 << 0));
+ i2c_write(addr, MAX8998_REG_ONOFF1, 1, val, 1);
+ i2c_read(addr, MAX8998_REG_ONOFF1, 1, val, 1);
+ /* Set ONOFF2 */
+ i2c_read(addr, MAX8998_REG_ONOFF2, 1, val, 1);
+ saved_val[1][0] = val[0];
+ saved_val[1][1] = val[1];
+ val[0] &= ~((1 << 7) | (1 << 6) | (1 << 5) | (1 << 3) |
+ (1 << 2) | (1 << 1) | (1 << 0));
+ val[0] |= (1 << 7);
+ i2c_write(addr, MAX8998_REG_ONOFF2, 1, val, 1);
+ i2c_read(addr, MAX8998_REG_ONOFF2, 1, val, 1);
+ /* Set ONOFF3 */
+ i2c_read(addr, MAX8998_REG_ONOFF3, 1, val, 1);
+ saved_val[2][0] = val[0];
+ saved_val[2][1] = val[1];
+ val[0] &= ~((1 << 7) | (1 << 6) | (1 << 5) | (1 << 4));
+ i2c_write(addr, MAX8998_REG_ONOFF3, 1, val, 1);
+ i2c_read(addr, MAX8998_REG_ONOFF3, 1, val, 1);
+ /* Set ONOFF4 */
+ i2c_read(addr, MAX8998_REG_ONOFF3+1, 1, val, 1);
+ saved_val[3][0] = val[0];
+ saved_val[3][1] = val[1];
+ val[0] &= ~((1 << 7) | (1 << 6) | (1 << 4));
+ i2c_write(addr, MAX8998_REG_ONOFF3+1, 1, val, 1);
+ i2c_read(addr, MAX8998_REG_ONOFF3+1, 1, val, 1);
+ printf("Turned off regulators. Preparing to sleep. [%s:%d]\n",
+ __FILE__, __LINE__);
+}
+
+void board_sleep_resume(void)
+{
+ unsigned char addr;
+ unsigned char val[2];
+
+ show_hw_revision();
+
+ i2c_set_bus_num(I2C_PMIC);
+ addr = 0xCC >> 1;
+ if (i2c_probe(addr)) {
+ printf("Can't find max8998\n");
+ return;
+ }
+
+ /* Set ONOFF1 */
+ i2c_write(addr, MAX8998_REG_ONOFF1, 1, saved_val[0], 1);
+ i2c_read(addr, MAX8998_REG_ONOFF1, 1, val, 1);
+ /* Set ONOFF2 */
+ i2c_write(addr, MAX8998_REG_ONOFF2, 1, saved_val[1], 1);
+ i2c_read(addr, MAX8998_REG_ONOFF2, 1, val, 1);
+ /* Set ONOFF3 */
+ i2c_write(addr, MAX8998_REG_ONOFF3, 1, saved_val[2], 1);
+ i2c_read(addr, MAX8998_REG_ONOFF3, 1, val, 1);
+ /* Set ONOFF4 */
+ i2c_write(addr, MAX8998_REG_ONOFF3+1, 1, saved_val[3], 1);
+ i2c_read(addr, MAX8998_REG_ONOFF3+1, 1, val, 1);
+ printf("Waked up.\n");
+
+ /* check max17040 */
+ check_battery();
+
+ /* check fsa9480 */
+ check_micro_usb(1);
+}
+
+#ifdef CONFIG_CMD_USBDOWN
+int usb_board_init(void)
+{
+#ifdef CONFIG_CMD_PMIC
+ run_command("pmic ldo 3 on", 0);
+#endif
+
+ if (cpu_is_s5pc100()) {
+#ifdef CONFIG_HARD_I2C
+ uchar val[2] = {0,};
+
+ /* PMIC */
+ if (i2c_read(0x66, 0, 1, val, 2)) {
+ printf("i2c_read error\n");
+ return 1;
+ }
+
+ val[0] |= (1 << 3);
+ val[1] |= (1 << 5);
+
+ if (i2c_write(0x66, 0, 1, val, 2)) {
+ printf("i2c_write error\n");
+ return 1;
+ }
+ i2c_read(0x66, 0, 1, val, 2);
+#endif
+ return 0;
+ }
+
+ /* S5PC110 */
+ if (board_is_limo_universal() ||
+ board_is_limo_real() ||
+ board_is_media()) {
+ /* check usb path */
+ if (board_is_limo_real() && !hwrevision(6))
+ check_mhl();
+ }
+
+ if (machine_is_tickertape())
+ /* USB_SEL: XM0ADDR_0: MP04[0] output mode */
+ gpio_direction_output(&s5pc110_gpio->gpio_mp0_4, 0, 0);
+
+ return 0;
+}
+#endif
+
+#ifdef CONFIG_GENERIC_MMC
+int s5p_no_mmc_support(void)
+{
+ return 0;
+}
+
+
+int board_mmc_init(bd_t *bis)
+{
+ unsigned int reg;
+ unsigned int clock;
+ struct s5pc110_clock *clk = (struct s5pc110_clock *)S5PC1XX_CLOCK_BASE;
+ int i;
+
+ /* MMC0 Clock source = SCLKMPLL */
+ reg = readl(&clk->src4);
+ reg &= ~0xf;
+ reg |= 0x6;
+ writel(reg, &clk->src4);
+
+ reg = readl(&clk->div4);
+ reg &= ~0xf;
+
+ /* set div value near 50MHz */
+ clock = get_pll_clk(MPLL) / 1000000;
+ for (i = 0; i < 0xf; i++) {
+ if ((clock / (i + 1)) <= 50) {
+ reg |= i << 0;
+ break;
+ }
+ }
+
+ writel(reg, &clk->div4);
+
+ /*
+ * MMC0 GPIO
+ * GPG0[0] SD_0_CLK
+ * GPG0[1] SD_0_CMD
+ * GPG0[2] SD_0_CDn -> Not used
+ * GPG0[3:6] SD_0_DATA[0:3]
+ */
+ for (i = 0; i < 7; i++) {
+ if (i == 2)
+ continue;
+ /* GPG0[0:6] special function 2 */
+ gpio_cfg_pin(&s5pc110_gpio->gpio_g0, i, 0x2);
+ /* GPG0[0:6] pull disable */
+ gpio_set_pull(&s5pc110_gpio->gpio_g0, i, GPIO_PULL_NONE);
+ /* GPG0[0:6] drv 4x */
+ gpio_set_drv(&s5pc110_gpio->gpio_g0, i, GPIO_DRV_4X);
+ }
+
+ return s5pc1xx_mmc_init(0);
+}
+#endif
+
+#ifdef CONFIG_CMD_PMIC
+static int pmic_status(void)
+{
+ unsigned char addr, val[2];
+ int reg, i;
+
+ i2c_set_bus_num(I2C_PMIC);
+ addr = 0xCC >> 1;
+ if (i2c_probe(addr)) {
+ printf("Can't found max8998\n");
+ return -1;
+ }
+
+ reg = 0x11;
+ i2c_read(addr, reg, 1, val, 1);
+ for (i = 7; i >= 4; i--)
+ printf("BUCK%d %s\n", 7 - i + 1,
+ val[0] & (1 << i) ? "on" : "off");
+ for (; i >= 0; i--)
+ printf("LDO%d %s\n", 5 - i,
+ val[0] & (1 << i) ? "on" : "off");
+ reg = 0x12;
+ i2c_read(addr, reg, 1, val, 1);
+ for (i = 7; i >= 0; i--)
+ printf("LDO%d %s\n", 7 - i + 6,
+ val[0] & (1 << i) ? "on" : "off");
+ reg = 0x13;
+ i2c_read(addr, reg, 1, val, 1);
+ for (i = 7; i >= 4; i--)
+ printf("LDO%d %s\n", 7 - i + 14,
+ val[0] & (1 << i) ? "on" : "off");
+ return 0;
+}
+
+static int pmic_ldo_control(int buck, int ldo, int on)
+{
+ unsigned char addr, val[2];
+ unsigned int reg, shift;
+
+ if (ldo) {
+ if (ldo < 2)
+ return -1;
+ if (ldo <= 5) {
+ reg = 0x11;
+ shift = 5 - ldo;
+ } else if (ldo <= 13) {
+ reg = 0x12;
+ shift = 13 - ldo;
+ } else if (ldo <= 17) {
+ reg = 0x13;
+ shift = 17 - ldo + 4;
+ } else
+ return -1;
+ } else if (buck) {
+ if (buck > 4)
+ return -1;
+ reg = 0x11;
+ shift = 4 - buck + 4;
+ } else
+ return -1;
+
+ i2c_set_bus_num(I2C_PMIC);
+ addr = 0xCC >> 1;
+ if (i2c_probe(addr)) {
+ printf("Can't found max8998\n");
+ return -1;
+ }
+
+ i2c_read(addr, reg, 1, val, 1);
+ if (on)
+ val[0] |= (1 << shift);
+ else
+ val[0] &= ~(1 << shift);
+ i2c_write(addr, reg, 1, val, 1);
+ i2c_read(addr, reg, 1, val, 1);
+ printf("%s %d value 0x%x, %s\n", buck ? "buck" : "ldo", buck ? : ldo,
+ val[0], val[0] & (1 << shift) ? "on" : "off");
+
+ return 0;
+}
+
+static int do_pmic(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+{
+ int buck = 0, ldo = 0, on = -1;
+
+ switch (argc) {
+ case 2:
+ if (strncmp(argv[1], "status", 6) == 0)
+ return pmic_status();
+ break;
+ case 4:
+ if (strncmp(argv[1], "ldo", 3) == 0) {
+ ldo = simple_strtoul(argv[2], NULL, 10);
+ if (strncmp(argv[3], "on", 2) == 0)
+ on = 1;
+ else if (strncmp(argv[3], "off", 3) == 0)
+ on = 0;
+ else
+ break;
+ return pmic_ldo_control(buck, ldo, on);
+ }
+ if (strncmp(argv[1], "buck", 4) == 0) {
+ buck = simple_strtoul(argv[2], NULL, 10);
+ if (strncmp(argv[3], "on", 2) == 0)
+ on = 1;
+ else if (strncmp(argv[3], "off", 3) == 0)
+ on = 0;
+ else
+ break;
+ return pmic_ldo_control(buck, ldo, on);
+ }
+
+ default:
+ break;
+ }
+
+ cmd_usage(cmdtp);
+ return 1;
+}
+
+U_BOOT_CMD(
+ pmic, CONFIG_SYS_MAXARGS, 1, do_pmic,
+ "PMIC LDO & BUCK control",
+ "status - Display PMIC LDO & BUCK status\n"
+ "pmic ldo num on/off - Turn on/off the LDO\n"
+ "pmic buck num on/off - Turn on/off the BUCK\n"
+);
+#endif
+
+#ifdef CONFIG_CMD_DEVICE_POWER
+
+enum {
+ POWER_NONE,
+ POWER_TOUCH,
+ POWER_3_TOUCHKEY,
+ POWER_LCD,
+ POWER_HAPTIC,
+ POWER_AUDIO_CODEC,
+ POWER_FM_RADIO,
+ POWER_BT_WIFI,
+ POWER_HDMI,
+};
+
+static void power_display_devices(void)
+{
+ printf("devices:\n");
+ printf("\t%d - touch\n", POWER_TOUCH);
+ printf("\t%d - 3 touchkey\n", POWER_3_TOUCHKEY);
+ printf("\t%d - LCD\n", POWER_LCD);
+ printf("\t%d - Haptic\n", POWER_HAPTIC);
+ printf("\t%d - Audio Codec\n", POWER_AUDIO_CODEC);
+ printf("\t%d - FM Radio\n", POWER_FM_RADIO);
+ printf("\t%d - BT/WiFi\n", POWER_BT_WIFI);
+ printf("\t%d - HDMI\n", POWER_HDMI);
+}
+
+static int power_hdmi(int on)
+{
+ /* HDMI_EN1: GPJ2[2] */
+ gpio_direction_output(&s5pc110_gpio->gpio_j2, 2, on);
+ /* MHL_ON: GPJ2[3] */
+ gpio_direction_output(&s5pc110_gpio->gpio_j2, 3, on);
+ return 0;
+}
+
+static int power_bt_wifi(int on)
+{
+ /* WLAN_BT_EN: GPB[5] */
+ gpio_direction_output(&s5pc110_gpio->gpio_b, 5, on);
+ return 0;
+}
+
+static int power_fm_radio(int on)
+{
+ /* FM_BUS_nRST: GPJ2[5] */
+ gpio_direction_output(&s5pc110_gpio->gpio_j2, 5, !on);
+ return 0;
+}
+
+static int power_audio_codec(int on)
+{
+ /* CODEC_LDO_EN: GPF3[4] */
+ gpio_direction_output(&s5pc110_gpio->gpio_f3, 4, on);
+ /* CODEC_XTAL_EN: GPH3[2] */
+ gpio_direction_output(&s5pc110_gpio->gpio_h3, 2, on);
+ return 0;
+}
+
+static int power_haptic(int on)
+{
+ /* HAPTIC_ON: GPJ1[1] */
+ gpio_direction_output(&s5pc110_gpio->gpio_j1, 1, on);
+ return 0;
+}
+
+static int power_lcd(int on)
+{
+ /* MLCD_ON: GPJ1[3] */
+ gpio_direction_output(&s5pc110_gpio->gpio_j1, 3, on);
+ return 0;
+}
+
+static int power_touch(int on)
+{
+ /* TOUCH_EN: GPG3[6] */
+ gpio_direction_output(&s5pc110_gpio->gpio_g3, 6, on);
+ return 0;
+}
+
+static int power_3_touchkey(int on)
+{
+ if (on) {
+ /* 3_TOUCH_EN - GPJ3[0] : (J1B2) */
+ /* 3_TOUCH_EN - GPJ3[5] : (not J1B2) */
+ if (board_rev & J1_B2_BOARD)
+ gpio_direction_output(&s5pc110_gpio->gpio_j3, 0, on);
+ else
+ gpio_direction_output(&s5pc110_gpio->gpio_j3, 5, on);
+
+ /* 3_TOUCH_CE - GPJ2[6] */
+ gpio_direction_output(&s5pc110_gpio->gpio_j2, 6, on); /* TOUCH_CE */
+ } else {
+ /* 3_TOUCH_CE - GPJ2[6] */
+ gpio_direction_output(&s5pc110_gpio->gpio_j2, 6, on); /* TOUCH_CE */
+ }
+
+ if (on) {
+ unsigned int reg;
+ unsigned char val[2];
+ unsigned char addr = 0x20; /* mcs5000 3-touchkey */
+
+ /* Require 100ms */
+ udelay(80 * 1000);
+
+ /* 3 touchkey */
+ i2c_set_bus_num(I2C_GPIO6);
+
+ /* Workaround to probe */
+ if (i2c_probe(addr)) {
+ if (i2c_probe(addr)) {
+ printf("Can't found 3 touchkey\n");
+ return -ENODEV;
+ }
+ }
+
+#define MCS5000_TK_HW_VERSION 0x06
+#define MCS5000_TK_FW_VERSION 0x0A
+#define MCS5000_TK_MI_VERSION 0x0B
+
+ reg = MCS5000_TK_MI_VERSION;
+ i2c_read(addr, reg, 1, val, 1);
+ printf("3-touchkey:\tM/I 0x%x, ", val[0]);
+ reg = MCS5000_TK_HW_VERSION;
+ i2c_read(addr, reg, 1, val, 1);
+ printf("H/W 0x%x, ", val[0]);
+ reg = MCS5000_TK_FW_VERSION;
+ i2c_read(addr, reg, 1, val, 1);
+ printf("F/W 0x%x\n", val[0]);
+ }
+ return 0;
+}
+
+static int power_control(int device, int on)
+{
+ switch (device) {
+ case POWER_TOUCH:
+ return power_touch(on);
+ case POWER_3_TOUCHKEY:
+ return power_3_touchkey(on);
+ case POWER_LCD:
+ return power_lcd(on);
+ case POWER_HAPTIC:
+ return power_haptic(on);
+ case POWER_AUDIO_CODEC:
+ return power_audio_codec(on);
+ case POWER_FM_RADIO:
+ return power_fm_radio(on);
+ case POWER_BT_WIFI:
+ return power_bt_wifi(on);
+ case POWER_HDMI:
+ return power_hdmi(on);
+ default:
+ printf("I don't know device %d\n", device);
+ break;
+ }
+ return 0;
+}
+
+static int power_on(int on)
+{
+ power_touch(on);
+ power_3_touchkey(on);
+ power_lcd(on);
+ power_haptic(on);
+ power_audio_codec(on);
+ power_fm_radio(on);
+ power_bt_wifi(on);
+ power_hdmi(on);
+
+ return 0;
+}
+
+static int do_power(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+{
+ int device, on;
+
+ if (!machine_is_aquila())
+ goto out;
+
+ switch (argc) {
+ case 2:
+ if (strncmp(argv[1], "on", 2) == 0)
+ return power_on(1);
+ if (strncmp(argv[1], "off", 3) == 0)
+ return power_on(0);
+ break;
+ case 3:
+ device = simple_strtoul(argv[1], NULL, 10);
+ if (device < 0)
+ break;
+
+ if (strncmp(argv[2], "on", 2) == 0)
+ on = 1;
+ else if (strncmp(argv[2], "off", 3) == 0)
+ on = 0;
+ else
+ break;
+ return power_control(device, on);
+ default:
+ break;
+ }
+out:
+ cmd_usage(cmdtp);
+ power_display_devices();
+ return 1;
+}
+
+U_BOOT_CMD(
+ power, CONFIG_SYS_MAXARGS, 1, do_power,
+ "Device Power Management control",
+ "device on/off - Turn on/off the device\n"
+);
+#endif
--- /dev/null
- struct s5pc1xx_gpio_bank *bank;
+#ifndef __GPIO_SETTING_H
+#define __GPIO_SETTING_H
+
+#include <asm/arch/gpio.h>
+#include <asm/arch/cpu.h>
+
+#define PDN_MASK(x) (0x3 << ((x) << 1))
+
+#define CON_INPUT(x) (0x0 << ((x) << 2))
+#define CON_OUTPUT(x) (0x1 << ((x) << 2))
+#define CON_IRQ(x) (0xf << ((x) << 2))
+
+#define DAT_SET(x) (0x1 << (x))
+#define DAT_CLEAR(x) (0x0 << (x))
+
+#define OUTPUT0(x) (0x0 << ((x) << 1))
+#define OUTPUT1(x) (0x1 << ((x) << 1))
+#define INPUT(x) (0x2 << ((x) << 1))
+#define KEEP_STATE(x) (0x3 << ((x) << 1))
+
+#define PULL_DIS(x) (0x0 << ((x) << 1))
+#define PULL_DOWN(x) (0x1 << ((x) << 1))
+#define PULL_UP(x) (0x2 << ((x) << 1))
+
+#define PREVIOUS(x) (0x3 << ((x) << 1))
+
+#define HWSUGGEST
+#ifdef HWSUGGEST
+#define PDNCON_NC(x) INPUT(x)
+#define PDNPUD_NC(x) PULL_DOWN(x)
+#else
+#define PDNCON_NC(x) OUTPUT0(x)
+#define PDNPUD_NC(x) PULL_DIS(x)
+#endif
+
+/* #define OPTMIZED_SLEEP_CURRENT_BCM4329 */
+
+struct gpio_powermode {
+ unsigned int conpdn;
+ unsigned int pudpdn;
+};
+
+struct gpio_external {
+ unsigned int con;
+ unsigned int dat;
+ unsigned int pud;
+};
+
+#define __GPIO(x) \
+ &((struct s5pc110_gpio *)S5PC110_GPIO_BASE)->gpio_##x
+/* In mirror mode, it sets "I(PD/PU)" according to the
+ * output at the u-boot time. */
+struct s5pc1xx_gpio_item {
++ struct s5p_gpio_bank *bank;
+ unsigned int number;
+};
+
+static struct s5pc1xx_gpio_item aquila_mirror_powerdown_mode[] = {
+};
+
+static struct s5pc1xx_gpio_item kessler_mirror_powerdown_mode[] = {
+ { .bank = __GPIO(j0), .number = 2},
+ { .bank = __GPIO(j0), .number = 3},
+ { .bank = __GPIO(j0), .number = 4},
+ { .bank = __GPIO(j0), .number = 7},
+};
+
+#undef __GPIO
+
+static struct gpio_powermode aquila_powerdown_modes[] = {
+ { /* S5PC110_GPIO_A0_OFFSET */
+ INPUT(0) | OUTPUT0(1) | INPUT(2) | OUTPUT0(3) |
+ INPUT(4) | OUTPUT0(5) | INPUT(6) | OUTPUT0(7),
+ PULL_DIS(0) | PULL_DIS(1) | PULL_DIS(2) | PULL_DIS(3) |
+ PULL_DIS(4) | PULL_DIS(5) | PULL_DIS(6) | PULL_DIS(7),
+ }, { /* S5PC110_GPIO_A1_OFFSET */
+ INPUT(0) | OUTPUT0(1) | INPUT(2) | INPUT(3),
+ PULL_DIS(0) | PULL_DIS(1) | PULL_DIS(2) | PULL_DIS(3),
+ }, { /* S5PC110_GPIO_B_OFFSET */
+ OUTPUT0(0) | OUTPUT0(1) | OUTPUT0(2) | OUTPUT0(3) |
+ INPUT(4) | OUTPUT0(5) | OUTPUT0(6) | OUTPUT0(7),
+ PULL_DIS(0) | PULL_DIS(1) | PULL_DIS(2) | PULL_DIS(3) |
+ PULL_DIS(4) | PULL_DIS(5) | PULL_DIS(6) | PULL_DIS(7),
+ }, { /* S5PC110_GPIO_C0_OFFSET */
+ OUTPUT0(0) | OUTPUT0(1) | OUTPUT0(2) | INPUT(3) |
+ OUTPUT0(4),
+ PULL_DIS(0) | PULL_DIS(1) | PULL_DIS(2) | PULL_DIS(3) |
+ PULL_DIS(4),
+ }, { /* S5PC110_GPIO_C1_OFFSET */
+ OUTPUT0(0) | OUTPUT0(1) | OUTPUT0(2) | INPUT(3) |
+ OUTPUT0(4),
+ PULL_DIS(0) | PULL_DIS(1) | PULL_DIS(2) | PULL_DIS(3) |
+ PULL_DIS(4),
+ }, { /* S5PC110_GPIO_D0_OFFSET */
+ OUTPUT0(0) | OUTPUT0(1) | OUTPUT0(2) | OUTPUT0(3),
+ PULL_DIS(0) | PULL_DIS(1) | PULL_DIS(2) | PULL_DIS(3),
+ }, { /* S5PC110_GPIO_D1_OFFSET */
+ INPUT(0) | INPUT(1) | INPUT(2) | INPUT(3) |
+ INPUT(4) | INPUT(5),
+ PULL_DIS(0) | PULL_DIS(1) | PULL_DIS(2) | PULL_DIS(3) |
+ PULL_DIS(4) | PULL_DIS(5),
+ }, { /* S5PC110_GPIO_E0_OFFSET */
+ INPUT(0) | INPUT(1) | INPUT(2) | INPUT(3) |
+ INPUT(4) | INPUT(5) | INPUT(6) | INPUT(7),
+ PULL_DOWN(0) | PULL_DOWN(1) | PULL_DOWN(2) | PULL_DOWN(3) |
+ PULL_DOWN(4) | PULL_DOWN(5) | PULL_DOWN(6) | PULL_DOWN(7),
+ }, { /* S5PC110_GPIO_E1_OFFSET */
+ INPUT(0) | INPUT(1) | INPUT(2) | OUTPUT0(3) |
+ OUTPUT0(4),
+ PULL_DOWN(0) | PULL_DOWN(1) | PULL_DOWN(2) | PULL_DIS(3) |
+ PULL_DIS(4),
+ }, { /* S5PC110_GPIO_F0_OFFSET */
+ OUTPUT0(0) | OUTPUT0(1) | OUTPUT0(2) | OUTPUT0(3) |
+ OUTPUT0(4) | OUTPUT0(5) | OUTPUT0(6) | OUTPUT0(7),
+ PULL_DIS(0) | PULL_DIS(1) | PULL_DIS(2) | PULL_DIS(3) |
+ PULL_DIS(4) | PULL_DIS(5) | PULL_DIS(6) | PULL_DIS(7),
+ }, { /* S5PC110_GPIO_F1_OFFSET */
+ OUTPUT0(0) | OUTPUT0(1) | OUTPUT0(2) | OUTPUT0(3) |
+ OUTPUT0(4) | OUTPUT0(5) | OUTPUT0(6) | OUTPUT0(7),
+ PULL_DIS(0) | PULL_DIS(1) | PULL_DIS(2) | PULL_DIS(3) |
+ PULL_DIS(4) | PULL_DIS(5) | PULL_DIS(6) | PULL_DIS(7),
+ }, { /* S5PC110_GPIO_F2_OFFSET */
+ OUTPUT0(0) | OUTPUT0(1) | OUTPUT0(2) | OUTPUT0(3) |
+ OUTPUT0(4) | OUTPUT0(5) | OUTPUT0(6) | OUTPUT0(7),
+ PULL_DIS(0) | PULL_DIS(1) | PULL_DIS(2) | PULL_DIS(3) |
+ PULL_DIS(4) | PULL_DIS(5) | PULL_DIS(6) | PULL_DIS(7),
+ }, { /* S5PC110_GPIO_F3_OFFSET */
+ /*
+ * GPF3[4]: CODEC_LDO_EN can be enabled at suspend
+ */
+ OUTPUT0(0) | OUTPUT0(1) | OUTPUT0(2) | OUTPUT0(3) |
+ OUTPUT0(4) | OUTPUT0(5),
+ PULL_DIS(0) | PULL_DIS(1) | PULL_DIS(2) | PULL_DIS(3) |
+ PULL_DIS(4) | PULL_DIS(5),
+ }, { /* S5PC110_GPIO_G0_OFFSET */
+ OUTPUT0(0) | OUTPUT0(1) | OUTPUT0(2) | OUTPUT0(3) |
+ OUTPUT0(4) | OUTPUT0(5) | OUTPUT0(6),
+ PULL_DIS(0) | PULL_DIS(1) | PULL_DIS(2) | PULL_DIS(3) |
+ PULL_DIS(4) | PULL_DIS(5) | PULL_DIS(6),
+ }, { /* S5PC110_GPIO_G1_OFFSET */
+
+ /*
+ * Chip Status: Off On
+ * GPG1[2]: WLAN_nRST low high (need to verify)
+ */
+#ifdef OPTMIZED_SLEEP_CURRENT_BCM4329
+ OUTPUT0(0) | INPUT(1) | OUTPUT0(2) | INPUT(3) |
+#else
+ OUTPUT0(0) | INPUT(1) | KEEP_STATE(2) | INPUT(3) |
+#endif
+ INPUT(4) | INPUT(5) | INPUT(6),
+ PULL_DIS(0) | PULL_UP(1) | PULL_DIS(2) | PULL_UP(3) |
+ PULL_UP(4) | PULL_UP(5) | PULL_UP(6),
+ }, { /* S5PC110_GPIO_G2_OFFSET */
+ OUTPUT0(0) | OUTPUT0(1) | OUTPUT0(2) | OUTPUT0(3) |
+ OUTPUT0(4) | OUTPUT0(5) | OUTPUT0(6),
+ PULL_DIS(0) | PULL_DIS(1) | PULL_DIS(2) | PULL_DIS(3) |
+ PULL_DIS(4) | PULL_DIS(5) | PULL_DIS(6),
+ }, { /* S5PC110_GPIO_G3_OFFSET */
+ OUTPUT0(0) | OUTPUT0(1) | OUTPUT1(2) | INPUT(3) |
+ OUTPUT0(4) | OUTPUT0(5) | OUTPUT0(6),
+ PULL_DIS(0) | PULL_DIS(1) | PULL_DIS(2) | PULL_DIS(3) |
+ PULL_DIS(4) | PULL_DIS(5) | PULL_DIS(6),
+ }, { /* S5PC110_GPIO_I_OFFSET */
+ OUTPUT0(0) | OUTPUT0(1) | OUTPUT0(2) | INPUT(3) |
+ OUTPUT0(4) | OUTPUT0(5) | OUTPUT0(6),
+ PULL_DIS(0) | PULL_DIS(1) | PULL_DIS(2) | PULL_DIS(3) |
+ PULL_DIS(4) | PULL_DIS(5) | PULL_DIS(6),
+ }, { /* S5PC110_GPIO_J0_OFFSET */
+ INPUT(0) | OUTPUT0(1) | INPUT(2) | INPUT(3) |
+ INPUT(4) | INPUT(5) | OUTPUT0(6) | OUTPUT0(7),
+ PULL_DOWN(0) | PULL_DIS(1) | PULL_DIS(2) | PULL_DIS(3) |
+ PULL_DIS(4) | PULL_DIS(5) | PULL_DIS(6) | PULL_DIS(7),
+ }, { /* S5PC110_GPIO_J1_OFFSET */
+ OUTPUT0(0) | OUTPUT0(1) | OUTPUT0(2) | OUTPUT0(3) |
+ OUTPUT0(4) | OUTPUT0(5) | OUTPUT0(6) | OUTPUT0(7),
+ PULL_DIS(0) | PULL_DIS(1) | PULL_DIS(2) | PULL_DIS(3) |
+ PULL_DIS(4) | PULL_DIS(5) | PULL_DIS(6) | PULL_DIS(7),
+ }, { /* S5PC110_GPIO_J2_OFFSET */
+ OUTPUT0(0) | OUTPUT0(1) | OUTPUT0(2) | OUTPUT0(3) |
+ INPUT(4) | OUTPUT0(5) | INPUT(6) | INPUT(7),
+ PULL_DIS(0) | PULL_DIS(1) | PULL_DIS(2) | PULL_DIS(3) |
+ PULL_DIS(4) | PULL_DIS(5) | PULL_DOWN(6) | PULL_DOWN(7),
+ }, { /* S5PC110_GPIO_J3_OFFSET */
+ INPUT(0) | INPUT(1) | OUTPUT0(2) | OUTPUT0(3) |
+ OUTPUT1(4) | OUTPUT0(5) | INPUT(6) | INPUT(7),
+ PULL_DOWN(0) | PULL_DOWN(1) | PULL_DIS(2) | PULL_DIS(3) |
+ PULL_DIS(4) | PULL_DIS(5) | PULL_DIS(6) | PULL_DIS(7),
+ }, { /* S5PC110_GPIO_J4_OFFSET */
+ INPUT(0) | OUTPUT0(1) | OUTPUT0(2) | INPUT(3) |
+ OUTPUT0(4),
+ PULL_DIS(0) | PULL_DIS(1) | PULL_DIS(2) | PULL_DIS(3) |
+ PULL_DIS(4),
+ }, { /* S5PC110_MP0_1_OFFSET */
+ OUTPUT0(0) | OUTPUT0(1) | OUTPUT1(2) | OUTPUT0(3) |
+ OUTPUT1(4) | OUTPUT0(5) | OUTPUT1(6) | OUTPUT1(7),
+ PULL_DIS(0) | PULL_DIS(1) | PULL_DIS(2) | PULL_DIS(3) |
+ PULL_DIS(4) | PULL_DIS(5) | PULL_DIS(6) | PULL_DIS(7),
+ }, { /* S5PC110_MP0_2_OFFSET */
+ OUTPUT0(0) | OUTPUT0(1) | INPUT(2) | OUTPUT0(3),
+ PULL_DIS(0) | PULL_DIS(1) | PULL_DIS(2) | PULL_DIS(3),
+ }, { /* S5PC110_MP0_3_OFFSET */
+ OUTPUT0(0) | OUTPUT0(1) | OUTPUT1(2) | OUTPUT0(3) |
+ INPUT(4) | OUTPUT0(5) | OUTPUT0(6) | OUTPUT0(7),
+ PULL_DIS(0) | PULL_DIS(1) | PULL_DIS(2) | PULL_DIS(3) |
+ PULL_DIS(4) | PULL_DIS(5) | PULL_DIS(6) | PULL_DIS(7),
+ }, { /* S5PC110_MP0_4_OFFSET */
+ OUTPUT0(0) | OUTPUT0(1) | OUTPUT0(2) | INPUT(3) |
+ INPUT(4) | OUTPUT0(5) | OUTPUT0(6) | OUTPUT0(7),
+ PULL_DIS(0) | PULL_DIS(1) | PULL_DIS(2) | PULL_DOWN(3) |
+ PULL_DOWN(4) | PULL_DIS(5) | PULL_DIS(6) | PULL_DIS(7),
+ }, { /* S5PC110_MP0_5_OFFSET */
+ INPUT(0) | OUTPUT0(1) | INPUT(2) | INPUT(3) |
+ OUTPUT0(4) | OUTPUT0(5) | OUTPUT0(6) | OUTPUT0(7),
+ PULL_DOWN(0) | PULL_DIS(1) | PULL_DIS(2) | PULL_DIS(3) |
+ PULL_DIS(4) | PULL_DIS(5) | PULL_DIS(6) | PULL_DIS(7),
+ }, { /* S5PC110_MP0_6_OFFSET */
+ OUTPUT0(0) | OUTPUT0(1) | OUTPUT0(2) | OUTPUT0(3) |
+ OUTPUT0(4) | OUTPUT0(5) | OUTPUT0(6) | OUTPUT0(7),
+ PULL_DIS(0) | PULL_DIS(1) | PULL_DIS(2) | PULL_DIS(3) |
+ PULL_DIS(4) | PULL_DIS(5) | PULL_DIS(6) | PULL_DIS(7),
+ }, { /* S5PC110_MP0_7_OFFSET */
+ OUTPUT0(0) | OUTPUT0(1) | OUTPUT0(2) | OUTPUT0(3) |
+ OUTPUT0(4) | OUTPUT0(5) | OUTPUT0(6) | OUTPUT0(7),
+ PULL_DIS(0) | PULL_DIS(1) | PULL_DIS(2) | PULL_DIS(3) |
+ PULL_DIS(4) | PULL_DIS(5) | PULL_DIS(6) | PULL_DIS(7),
+ },
+};
+
+static struct gpio_external aquila_external_powerdown_modes[] = {
+ { /* S5PC110_GPIO_H0_OFFSET */
+ CON_OUTPUT(0) | CON_INPUT(1) | CON_OUTPUT(2) | CON_OUTPUT(3) |
+ CON_OUTPUT(4) | CON_OUTPUT(5) | CON_INPUT(6) | CON_IRQ(7),
+ DAT_SET(0) | DAT_CLEAR(2) | DAT_CLEAR(3) |
+ DAT_CLEAR(4) | DAT_CLEAR(5),
+ PULL_DIS(0) | PULL_DIS(1) | PULL_DIS(2) | PULL_DIS(3) |
+ PULL_DIS(4) | PULL_DIS(5),
+ }, { /* S5PC110_GPIO_H1_OFFSET */
+ CON_INPUT(0) | CON_INPUT(1) | CON_OUTPUT(2) | CON_IRQ(3) |
+ CON_INPUT(4) | CON_INPUT(5) | CON_OUTPUT(6) | CON_INPUT(7),
+ DAT_SET(0),
+ PULL_DIS(0) | PULL_DIS(1) | PULL_DIS(2) | PULL_DIS(3) |
+ PULL_DOWN(4),
+ }, { /* S5PC110_GPIO_H2_OFFSET */
+ CON_OUTPUT(0) | CON_OUTPUT(1) | CON_OUTPUT(2) | CON_OUTPUT(3) |
+ CON_IRQ(4) | CON_IRQ(5) | CON_IRQ(6) | CON_IRQ(7),
+ DAT_CLEAR(0) | DAT_CLEAR(1) | DAT_CLEAR(2) | DAT_CLEAR(3),
+ 0,
+ }, { /* S5PC110_GPIO_H3_OFFSET */
+ CON_IRQ(0) | CON_IRQ(1) | CON_IRQ(2) | CON_OUTPUT(3) |
+ CON_IRQ(4) | CON_INPUT(5) | CON_IRQ(6) | CON_OUTPUT(7),
+ DAT_CLEAR(3) | DAT_CLEAR(7),
+ 0,
+ },
+};
+
+static struct gpio_powermode kessler_powerdown_modes[] = {
+ { /* S5PC110(ARIES)_GPIO_A0_OFFSET */
+ INPUT(0) | OUTPUT0(1) | INPUT(2) | OUTPUT0(3) |
+ INPUT(4) | OUTPUT0(5) | INPUT(6) | OUTPUT0(7),
+ PULL_DIS(0) | PULL_DIS(1) | PULL_DIS(2) | PULL_DIS(3) |
+ PULL_DIS(4) | PULL_DIS(5) | PULL_DIS(6) | PULL_DIS(7),
+ }, { /* S5PC110(ARIES)_GPIO_A1_OFFSET */
+ INPUT(0) | OUTPUT0(1) | INPUT(2) | INPUT(3),
+ PULL_DIS(0) | PULL_DIS(1) | PULL_DIS(2) | PULL_DIS(3),
+ }, { /* S5PC110(ARIES)_GPIO_B_OFFSET */
+ OUTPUT0(0) | OUTPUT0(1) | OUTPUT0(2) | OUTPUT0(3) |
+ INPUT(4) | OUTPUT0(5) | PDNCON_NC(6) | OUTPUT0(7),
+ PULL_DIS(0) | PULL_DIS(1) | PULL_DIS(2) | PULL_DIS(3) |
+ PULL_DIS(4) | PULL_DIS(5) | PDNPUD_NC(6) | PULL_DIS(7),
+ }, { /* S5PC110(ARIES)_GPIO_C0_OFFSET */
+ OUTPUT0(0) | PDNCON_NC(1) | OUTPUT0(2) | INPUT(3) |
+ OUTPUT0(4),
+ PULL_DIS(0) | PDNPUD_NC(1) | PULL_DIS(2) | PULL_DIS(3) |
+ PULL_DIS(4),
+ }, { /* S5PC110(ARIES)_GPIO_C1_OFFSET */
+ OUTPUT0(0) | PDNCON_NC(1) | OUTPUT0(2) | INPUT(3) |
+ OUTPUT0(4),
+ PULL_DIS(0) | PDNPUD_NC(1) | PULL_DIS(2) | PULL_DIS(3) |
+ PULL_DIS(4),
+ }, { /* S5PC110(ARIES)_GPIO_D0_OFFSET */
+ PDNCON_NC(0) | OUTPUT0(1) | PDNCON_NC(2) | PDNCON_NC(3),
+ PDNPUD_NC(0) | PULL_DIS(1) | PDNPUD_NC(2) | PDNPUD_NC(3),
+ }, { /* S5PC110(ARIES)_GPIO_D1_OFFSET */
+ INPUT(0) | INPUT(1) | INPUT(2) | INPUT(3) |
+ INPUT(4) | INPUT(5),
+ PULL_DIS(0) | PULL_DIS(1) | PULL_DIS(2) | PULL_DIS(3) |
+ PULL_DIS(4) | PULL_DIS(5),
+ }, { /* S5PC110(ARIES)_GPIO_E0_OFFSET */
+ INPUT(0) | INPUT(1) | INPUT(2) | INPUT(3) |
+ INPUT(4) | INPUT(5) | INPUT(6) | INPUT(7),
+ PULL_DOWN(0) | PULL_DOWN(1) | PULL_DOWN(2) | PULL_DOWN(3) |
+ PULL_DOWN(4) | PULL_DOWN(5) | PULL_DOWN(6) | PULL_DOWN(7),
+ }, { /* S5PC110(ARIES)_GPIO_E1_OFFSET */
+ INPUT(0) | INPUT(1) | INPUT(2) | OUTPUT0(3) |
+ PDNCON_NC(4),
+ PULL_DOWN(0) | PULL_DOWN(1) | PULL_DOWN(2) | PULL_DIS(3) |
+ PDNPUD_NC(4),
+ }, { /* S5PC110(ARIES)_GPIO_F0_OFFSET */
+ OUTPUT0(0) | OUTPUT0(1) | OUTPUT0(2) | OUTPUT0(3) |
+ OUTPUT0(4) | OUTPUT0(5) | OUTPUT0(6) | OUTPUT0(7),
+ PULL_DIS(0) | PULL_DIS(1) | PULL_DIS(2) | PULL_DIS(3) |
+ PULL_DIS(4) | PULL_DIS(5) | PULL_DIS(6) | PULL_DIS(7),
+ }, { /* S5PC110(ARIES)_GPIO_F1_OFFSET */
+ OUTPUT0(0) | OUTPUT0(1) | OUTPUT0(2) | OUTPUT0(3) |
+ OUTPUT0(4) | OUTPUT0(5) | OUTPUT0(6) | OUTPUT0(7),
+ PULL_DIS(0) | PULL_DIS(1) | PULL_DIS(2) | PULL_DIS(3) |
+ PULL_DIS(4) | PULL_DIS(5) | PULL_DIS(6) | PULL_DIS(7),
+ }, { /* S5PC110(ARIES)_GPIO_F2_OFFSET */
+ OUTPUT0(0) | OUTPUT0(1) | OUTPUT0(2) | OUTPUT0(3) |
+ OUTPUT0(4) | OUTPUT0(5) | OUTPUT0(6) | OUTPUT0(7),
+ PULL_DIS(0) | PULL_DIS(1) | PULL_DIS(2) | PULL_DIS(3) |
+ PULL_DIS(4) | PULL_DIS(5) | PULL_DIS(6) | PULL_DIS(7),
+ }, { /* S5PC110(ARIES)_GPIO_F3_OFFSET */
+ /*
+ * GPF3[4]: CODEC_LDO_EN can be enabled at suspend
+ */
+ OUTPUT0(0) | OUTPUT0(1) | OUTPUT0(2) | OUTPUT0(3) |
+ INPUT(4) | PDNCON_NC(5),
+ PULL_DIS(0) | PULL_DIS(1) | PULL_DIS(2) | PULL_DIS(3) |
+ PULL_DOWN(4) | PDNPUD_NC(5),
+ }, { /* S5PC110(ARIES)_GPIO_G0_OFFSET */
+ OUTPUT0(0) | OUTPUT0(1) | INPUT(2) | OUTPUT0(3) |
+ OUTPUT0(4) | OUTPUT0(5) | OUTPUT0(6),
+ PULL_DIS(0) | PULL_DIS(1) | PULL_DIS(2) | PULL_DIS(3) |
+ PULL_DIS(4) | PULL_DIS(5) | PULL_DIS(6),
+ }, { /* S5PC110(ARIES)_GPIO_G1_OFFSET */
+#ifdef OPTMIZED_SLEEP_CURRENT_BCM4329
+ OUTPUT0(0) | OUTPUT1(1) | OUTPUT0(2) | OUTPUT1(3) |
+ OUTPUT1(4) | OUTPUT1(5) | OUTPUT1(6),
+#else
+ OUTPUT0(0) | OUTPUT1(1) | KEEP_STATE(2) | OUTPUT1(3) |
+ OUTPUT1(4) | OUTPUT1(5) | OUTPUT1(6),
+#endif
+ PULL_DIS(0) | PULL_DIS(1) | PULL_DIS(2) | PULL_DIS(3) |
+ PULL_DIS(4) | PULL_DIS(5) | PULL_DIS(6),
+ }, { /* S5PC110(ARIES)_GPIO_G2_OFFSET */
+ OUTPUT0(0) | OUTPUT0(1) | INPUT(2) | OUTPUT0(3) |
+ OUTPUT0(4) | OUTPUT0(5) | OUTPUT0(6),
+ PULL_DIS(0) | PULL_DIS(1) | PULL_DIS(2) | PULL_DIS(3) |
+ PULL_DIS(4) | PULL_DIS(5) | PULL_DIS(6),
+ }, { /* S5PC110(ARIES)_GPIO_G3_OFFSET */
+ OUTPUT1(0) | OUTPUT0(1) | PDNCON_NC(2) | INPUT(3) |
+ OUTPUT0(4) | OUTPUT0(5) | OUTPUT0(6),
+ PULL_DIS(0) | PULL_DIS(1) | PDNPUD_NC(2) | PULL_DIS(3) |
+ PULL_DIS(4) | PULL_DIS(5) | PULL_DIS(6),
+ }, { /* S5PC110(ARIES)_GPIO_I_OFFSET */
+ OUTPUT0(0) | OUTPUT0(1) | OUTPUT0(2) | OUTPUT0(3) |
+ OUTPUT0(4) | OUTPUT0(5) | OUTPUT0(6),
+ PULL_DIS(0) | PULL_DIS(1) | PULL_DIS(2) | PULL_DIS(3) |
+ PULL_DIS(4) | PULL_DIS(5) | PULL_DIS(6),
+ }, { /* S5PC110(ARIES)_GPIO_J0_OFFSET */
+ INPUT(0) | INPUT(1) | INPUT(2) | INPUT(3) |
+ INPUT(4) | INPUT(5) | OUTPUT0(6) | INPUT(7),
+ PULL_DIS(0) | PULL_DIS(1) | PULL_DIS(2) | PULL_DIS(3) |
+ PULL_DIS(4) | PULL_DIS(5) | PULL_DIS(6) | PULL_DIS(7),
+ }, { /* S5PC110(ARIES)_GPIO_J1_OFFSET */
+ OUTPUT1(0) | OUTPUT0(1) | OUTPUT0(2) | INPUT(3) |
+ INPUT(4) | OUTPUT0(5) | OUTPUT0(6) | OUTPUT0(7),
+ PULL_DIS(0) | PULL_DIS(1) | PULL_DIS(2) | PULL_DOWN(3) |
+ PULL_DIS(4) | PULL_DIS(5) | PULL_DIS(6) | PULL_DIS(7),
+ }, { /* S5PC110(ARIES)_GPIO_J2_OFFSET */
+ OUTPUT0(0) | OUTPUT0(1) | OUTPUT0(2) | OUTPUT0(3) |
+ INPUT(4) | OUTPUT0(5) | OUTPUT0(6) | OUTPUT0(7),
+ PULL_DIS(0) | PULL_DIS(1) | PULL_DIS(2) | PULL_DIS(3) |
+ PULL_DIS(4) | PULL_DIS(5) | PULL_DIS(6) | PULL_DIS(7),
+ }, { /* S5PC110(ARIES)_GPIO_J3_OFFSET */
+ INPUT(0) | INPUT(1) | OUTPUT0(2) | OUTPUT0(3) |
+ INPUT(4) | INPUT(5) | INPUT(6) | INPUT(7),
+ PULL_DIS(0) | PULL_DIS(1) | PULL_DIS(2) | PULL_DIS(3) |
+ PULL_DIS(4) | PULL_DIS(5) | PULL_DIS(6) | PULL_DIS(7),
+ }, { /* S5PC110(ARIES)_GPIO_J4_OFFSET */
+ INPUT(0) | INPUT(1) | OUTPUT0(2) | INPUT(3) |
+ OUTPUT0(4),
+ PULL_DIS(0) | PULL_DIS(1) | PULL_DIS(2) | PULL_DIS(3) |
+ PULL_DIS(4),
+ }, { /* S5PC110(ARIES)_MP0_1_OFFSET */
+ /* XM0CSN[4]: MP0_1[4] -> output high */
+ PDNCON_NC(0) | OUTPUT0(1) | PDNCON_NC(2) | INPUT(3) |
+ OUTPUT1(4) | INPUT(5) | PDNCON_NC(6) | PDNCON_NC(7),
+ PDNPUD_NC(0) | PULL_DIS(1) | PDNPUD_NC(2) | PULL_DOWN(3) |
+ PULL_DIS(4) | PULL_DOWN(5) | PDNPUD_NC(6) | PDNPUD_NC(7),
+ }, { /* S5PC110(ARIES)_MP0_2_OFFSET */
+ PDNCON_NC(0) | PDNCON_NC(1) | INPUT(2) | PDNCON_NC(3),
+ PDNPUD_NC(0) | PDNPUD_NC(1) | PULL_DIS(2) | PDNPUD_NC(3),
+ }, { /* S5PC110(ARIES)_MP0_3_OFFSET */
+ /* XM0FWEN: MP0_3[2] -> output high */
+ PDNCON_NC(0) | PDNCON_NC(1) | OUTPUT1(2) | INPUT(3) |
+ INPUT(4) | OUTPUT1(5) | PDNCON_NC(6) | PDNCON_NC(7),
+ PDNPUD_NC(0) | PDNPUD_NC(1) | PULL_DIS(2) | PULL_DOWN(3) |
+ PULL_DIS(4) | PULL_DIS(5) | PDNPUD_NC(6) | PDNPUD_NC(7),
+ }, { /* S5PC110(ARIES)_MP0_4_OFFSET */
+ PDNCON_NC(0) | OUTPUT0(1) | OUTPUT0(2) | INPUT(3) |
+ PDNCON_NC(4) | PDNCON_NC(5) | OUTPUT0(6) | PDNCON_NC(7),
+ PDNPUD_NC(0) | PULL_DIS(1) | PULL_DIS(2) | PULL_DOWN(3) |
+ PDNPUD_NC(4) | PDNPUD_NC(5) | PULL_DIS(6) | PDNPUD_NC(7),
+ }, { /* S5PC110(ARIES)_MP0_5_OFFSET */
+ INPUT(0) | INPUT(1) | INPUT(2) | INPUT(3) |
+ INPUT(4) | OUTPUT0(5) | INPUT(6) | OUTPUT0(7),
+ PULL_DIS(0) | PULL_DIS(1) | PULL_DIS(2) | PULL_DIS(3) |
+ PULL_DOWN(4) | PULL_DIS(5) | PULL_UP(6) | PULL_DIS(7),
+ }, { /* S5PC110(ARIES)_MP0_6_OFFSET */
+ PDNCON_NC(0) | PDNCON_NC(1) | PDNCON_NC(2) | PDNCON_NC(3) |
+ PDNCON_NC(4) | PDNCON_NC(5) | PDNCON_NC(6) | PDNCON_NC(7),
+ PDNPUD_NC(0) | PDNPUD_NC(1) | PDNPUD_NC(2) | PDNPUD_NC(3) |
+ PDNPUD_NC(4) | PDNPUD_NC(5) | PDNPUD_NC(6) | PDNPUD_NC(7),
+ }, { /* S5PC110(ARIES)_MP0_7_OFFSET */
+ PDNCON_NC(0) | PDNCON_NC(1) | PDNCON_NC(2) | PDNCON_NC(3) |
+ PDNCON_NC(4) | PDNCON_NC(5) | PDNCON_NC(6) | PDNCON_NC(7),
+ PDNPUD_NC(0) | PDNPUD_NC(1) | PDNPUD_NC(2) | PDNPUD_NC(3) |
+ PDNPUD_NC(4) | PDNPUD_NC(5) | PDNPUD_NC(6) | PDNPUD_NC(7),
+ },
+};
+
+static struct gpio_external kessler_external_powerdown_modes[] = {
+ { /* S5PC110(ARIES)_GPIO_H0_OFFSET */
+ CON_OUTPUT(0) | CON_INPUT(1) | CON_OUTPUT(2) | CON_OUTPUT(3) |
+ CON_OUTPUT(4) | CON_OUTPUT(5) | CON_INPUT(6) | CON_IRQ(7),
+ DAT_SET(0) | DAT_CLEAR(2) | DAT_CLEAR(3) |
+ DAT_CLEAR(4) | DAT_CLEAR(5),
+ PULL_DIS(0) | PULL_DIS(1) | PULL_DIS(2) | PULL_DIS(3) |
+ PULL_DIS(4) | PULL_DIS(5),
+ }, { /* S5PC110(ARIES)_GPIO_H1_OFFSET */
+ CON_OUTPUT(0) | CON_OUTPUT(1) | CON_OUTPUT(2) | CON_IRQ(3) |
+ CON_OUTPUT(4) | CON_OUTPUT(5) | CON_OUTPUT(6) | CON_INPUT(7),
+ DAT_CLEAR(0),
+ PULL_DIS(0) | PULL_DIS(1) | PULL_DIS(2) | PULL_DIS(3) |
+ PULL_DIS(4),
+ }, { /* S5PC110(ARIES)_GPIO_H2_OFFSET */
+ CON_OUTPUT(0) | CON_OUTPUT(1) | CON_OUTPUT(2) | CON_OUTPUT(3) |
+ CON_IRQ(4) | CON_IRQ(5) | CON_IRQ(6) | CON_IRQ(7),
+ DAT_CLEAR(0) | DAT_CLEAR(1) | DAT_CLEAR(2) | DAT_CLEAR(3),
+ 0,
+ }, { /* S5PC110(ARIES)_GPIO_H3_OFFSET */
+ CON_IRQ(0) | CON_IRQ(1) | CON_IRQ(2) | CON_OUTPUT(3) |
+ CON_IRQ(4) | CON_OUTPUT(5) | CON_IRQ(6) | CON_OUTPUT(7),
+ DAT_CLEAR(3) | DAT_CLEAR(5) | DAT_CLEAR(7),
+ 0,
+ },
+};
+
+#endif /* __GPIO_SETTING_H */
--- /dev/null
- static unsigned int get_hw_revision(struct s5pc1xx_gpio_bank *bank, int hwrev3)
+/*
+ * Copyright (C) 2009 Samsung Electronics
+ * Kyungmin Park <kyungmin.park@samsung.com>
+ * Minkyu Kang <mk7.kang@samsung.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <i2c.h>
+#include <malloc.h>
+#include <asm/io.h>
+#include <asm/arch/clk.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/keypad.h>
+#include <asm/arch/mmc.h>
+#include <asm/arch/power.h>
+#include <asm/arch/mem.h>
+#include <asm/arch/hs_otg.h>
+#include <asm/arch/regs-otg.h>
+#include <asm/arch/rtc.h>
+#include <asm/arch/adc.h>
+#include <asm/errno.h>
+#include <fbutils.h>
+#include <lcd.h>
+#include <bmp_layout.h>
+
+#include "animation_frames.h"
+#include "gpio_setting.h"
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#define C100_MACH_START 3000
+#define C110_MACH_START 3100
+
+static unsigned int board_rev;
+static unsigned int battery_soc;
+static struct s5pc110_gpio *s5pc110_gpio;
+
+enum {
+ I2C_2,
+ I2C_GPIO3,
+ I2C_PMIC,
+ I2C_GPIO5,
+ I2C_GPIO6,
+ I2C_GPIO7,
+ I2C_GPIO10,
+};
+
+/*
+ * i2c 2
+ * SDA: GPD1[4]
+ * SCL: GPD1[5]
+ */
+static struct i2c_gpio_bus_data i2c_2 = {
+ .sda_pin = 4,
+ .scl_pin = 5,
+};
+
+/*
+ * i2c gpio3
+ * SDA: GPJ3[6]
+ * SCL: GPJ3[7]
+ */
+static struct i2c_gpio_bus_data i2c_gpio3 = {
+ .sda_pin = 6,
+ .scl_pin = 7,
+};
+
+/*
+ * i2c pmic
+ * SDA: GPJ4[0]
+ * SCL: GPJ4[3]
+ */
+static struct i2c_gpio_bus_data i2c_pmic = {
+ .sda_pin = 0,
+ .scl_pin = 3,
+};
+
+/*
+ * i2c gpio5
+ * SDA: MP05[3]
+ * SCL: MP05[2]
+ */
+static struct i2c_gpio_bus_data i2c_gpio5 = {
+ .sda_pin = 3,
+ .scl_pin = 2,
+};
+
+/*
+ * i2c gpio6
+ * SDA: GPJ3[4]
+ * SCL: GPJ3[5]
+ */
+static struct i2c_gpio_bus_data i2c_gpio6 = {
+ .sda_pin = 4,
+ .scl_pin = 5,
+};
+
+/*
+ * i2c gpio7 - goni
+ * SDA: MP05[1]
+ * SCL: MP05[0]
+ */
+static struct i2c_gpio_bus_data i2c_gpio7 = {
+ .sda_pin = 1,
+ .scl_pin = 0,
+};
+
+/*
+ * i2c gpio7 - cypress
+ * SDA: MP05[6]
+ * SCL: MP05[4]
+ */
+static struct i2c_gpio_bus_data i2c_cypress_gpio7 = {
+ .sda_pin = 6,
+ .scl_pin = 4,
+};
+
+/*
+ * i2c gpio10
+ * SDA: GPJ3[0]
+ * SCL: GPJ3[1]
+ */
+static struct i2c_gpio_bus_data i2c_gpio10 = {
+ .sda_pin = 0,
+ .scl_pin = 1,
+};
+
+
+static struct i2c_gpio_bus i2c_gpio[] = {
+ {
+ .bus = &i2c_2,
+ }, {
+ .bus = &i2c_gpio3,
+ }, {
+ .bus = &i2c_pmic,
+ }, {
+ .bus = &i2c_gpio5,
+ }, {
+ .bus = &i2c_gpio6,
+ }, {
+ .bus = &i2c_gpio7,
+ }, {
+ .bus = &i2c_gpio10,
+ },
+};
+
+u32 get_board_rev(void)
+{
+ return board_rev;
+}
+
+static int hwrevision(int rev)
+{
+ return (board_rev & 0xf) == rev;
+}
+
+enum {
+ MACH_UNIVERSAL,
+ MACH_TICKERTAPE,
+ MACH_CHANGED,
+ MACH_P1P2, /* Don't remove it */
+ MACH_GEMINUS,
+ MACH_CYPRESS,
+
+ MACH_WMG160 = 160,
+
+ MACH_PSEUDO_END,
+
+ MACH_GONI = 2862,
+};
+
+#define SPLIT_SCREEN_FEATURE 0x100
+
+/* board is MACH_AQUILA and board is like below. */
+#define J1_B2_BOARD 0x0200
+#define LIMO_UNIVERSAL_BOARD 0x0400
+#define LIMO_REAL_BOARD 0x0800
+#define MEDIA_BOARD 0x1000
+#define BAMBOO_BOARD 0x2000
+
+/* board is MACH_GONI and board is like below */
+#define S1_BOARD 0x1000
+#define KESSLER_BOARD 0x4000
+#define SDK_BOARD 0x8000
+
+#define BOARD_MASK 0xFF00
+
+static int c110_machine_id(void)
+{
+ return gd->bd->bi_arch_number - C110_MACH_START;
+}
+
+static int mach_is_aquila(void)
+{
+ return gd->bd->bi_arch_number == MACH_TYPE_AQUILA;
+}
+
+static int mach_is_tickertape(void)
+{
+ return c110_machine_id() == MACH_TICKERTAPE;
+}
+
+static int mach_is_geminus(void)
+{
+ return c110_machine_id() == MACH_GEMINUS;
+}
+
+static int mach_is_cypress(void)
+{
+ return c110_machine_id() == MACH_CYPRESS;
+}
+
+static int board_is_limo_universal(void)
+{
+ return mach_is_aquila() && (board_rev & LIMO_UNIVERSAL_BOARD);
+}
+
+static int board_is_limo_real(void)
+{
+ return mach_is_aquila() && (board_rev & LIMO_REAL_BOARD);
+}
+
+static int board_is_bamboo(void)
+{
+ return mach_is_aquila() && (board_rev & BAMBOO_BOARD);
+}
+
+static int board_is_media(void)
+{
+ return mach_is_aquila() && (board_rev & MEDIA_BOARD);
+}
+
+static int board_is_j1b2(void)
+{
+ return mach_is_aquila() && (board_rev & J1_B2_BOARD);
+}
+
+/* Kessler */
+static int mach_is_goni(void)
+{
+ return gd->bd->bi_arch_number == MACH_GONI;
+}
+
+static int board_is_sdk(void)
+{
+ return mach_is_goni() && (board_rev & SDK_BOARD);
+}
+
+static int board_is_s1(void)
+{
+ return mach_is_goni() && (board_rev & S1_BOARD);
+}
+
+/* DLNA Dongle */
+static int mach_is_wmg160(void)
+{
+ return c110_machine_id() == MACH_WMG160;
+}
+
+static void check_battery(int mode);
+static void check_micro_usb(int intr);
+
+void i2c_init_board(void)
+{
+ struct s5pc110_gpio *gpio = (struct s5pc110_gpio *)S5PC110_GPIO_BASE;
+ int num_bus;
+
+ if (cpu_is_s5pc100())
+ return;
+
+ num_bus = ARRAY_SIZE(i2c_gpio);
+
+ if (mach_is_aquila()) {
+ i2c_gpio[I2C_GPIO6].bus->gpio_base = 0;
+ i2c_gpio[I2C_GPIO7].bus->gpio_base = 0;
+ } else if (mach_is_goni()) {
+ i2c_gpio[I2C_GPIO7].bus->gpio_base =
+ (unsigned int)&gpio->gpio_mp0_5;
+ } else if (mach_is_cypress()) {
+ i2c_gpio[I2C_GPIO7].bus = &i2c_cypress_gpio7;
+ i2c_gpio[I2C_GPIO7].bus->gpio_base =
+ (unsigned int)&gpio->gpio_mp0_5;
+ } else {
+ i2c_gpio[I2C_GPIO7].bus->gpio_base = 0;
+ }
+
+ i2c_gpio[I2C_2].bus->gpio_base = (unsigned int)&gpio->gpio_d1;
+ i2c_gpio[I2C_GPIO3].bus->gpio_base = (unsigned int)&gpio->gpio_j3;
+ i2c_gpio[I2C_PMIC].bus->gpio_base = (unsigned int)&gpio->gpio_j4;
+ i2c_gpio[I2C_GPIO5].bus->gpio_base = (unsigned int)&gpio->gpio_mp0_5;
+ i2c_gpio[I2C_GPIO6].bus->gpio_base = (unsigned int)&gpio->gpio_j3;
+
+ i2c_gpio_init(i2c_gpio, num_bus, I2C_PMIC);
+
+ /* Reset on fsa9480 early */
+ check_micro_usb(1);
+ /* Reset on max17040 early */
+ if (battery_soc == 0)
+ check_battery(1);
+}
+
+#ifdef CONFIG_MISC_INIT_R
+#define DEV_INFO_LEN 256
+static char device_info[DEV_INFO_LEN];
+static int display_info;
+
+static void empty_device_info_buffer(void)
+{
+ memset(device_info, 0x0, DEV_INFO_LEN);
+}
+
+static void dprintf(const char *fmt, ...)
+{
+ va_list args;
+ uint i;
+ char buf[128];
+
+ va_start(args, fmt);
+ i = vsprintf(buf, fmt, args);
+ va_end(args);
+
+ buf[127] = 0;
+
+ if ((strlen(device_info) + strlen(buf)) > (DEV_INFO_LEN - 1)) {
+ puts("Flushing device info...\n");
+ puts(device_info);
+ empty_device_info_buffer();
+ }
+ strncat(device_info, buf, 127);
+ puts(buf);
+}
+
+#ifdef CONFIG_S5PC1XXFB
+static void display_device_info(void)
+{
+ if (!display_info)
+ return;
+
+ init_font();
+ set_font_xy(0, 450);
+ set_font_color(FONT_WHITE);
+ fb_printf(device_info);
+ exit_font();
+
+ memset(device_info, 0x0, DEV_INFO_LEN);
+
+ udelay(5 * 1000 * 1000);
+}
+#endif
+
+static const char *board_name[] = {
+ "Universal",
+ "TickerTape",
+ "Goni",
+ "P1P2", /* Don't remove it */
+ "Geminus",
+ "Cypress",
+ "Limo SDK",
+};
+
+enum {
+ MEM_4G1G1G,
+ MEM_4G2G1G,
+ MEM_4G3G1G,
+ MEM_4G4G1G,
+};
+
+static char feature_buffer[32];
+
+static char *display_features(int board, int board_rev)
+{
+ int count = 0;
+ char *buf = feature_buffer;
+ char *name = NULL;
+
+ if (board == MACH_TYPE_AQUILA) {
+ if (board_rev & SPLIT_SCREEN_FEATURE)
+ name = "SplitScreen";
+ if (board_rev & J1_B2_BOARD)
+ name = "J1 B2";
+ /* Limo Real or Universal */
+ if (board_rev & LIMO_REAL_BOARD)
+ name = "Limo Real";
+ else if (board_rev & LIMO_UNIVERSAL_BOARD)
+ name = "Limo Universal";
+ if (board_rev & MEDIA_BOARD)
+ name = "Media";
+ if (board_rev & BAMBOO_BOARD)
+ name = "Bamboo";
+ } else if (board == MACH_GONI) {
+ if (board_rev & SDK_BOARD)
+ name = "Limo SDK";
+ if (board_rev & S1_BOARD)
+ name = "S1";
+ }
+ if (name)
+ count += sprintf(buf + count, " - %s", name);
+
+ return buf;
+}
+
+static char *get_board_name(int board)
+{
+ if (board == MACH_TYPE_AQUILA)
+ return "Aquila";
+ else if (board == MACH_GONI)
+ return "Goni";
+ else if (board == MACH_WMG160)
+ return "WMG160";
+ return (char *) board_name[board];
+}
+
+static void check_board_revision(int board, int rev)
+{
+ if (board == MACH_TYPE_AQUILA) {
+ /* Limo Real or Universal */
+ if (rev & LIMO_UNIVERSAL_BOARD)
+ board_rev &= ~J1_B2_BOARD;
+ if (rev & LIMO_REAL_BOARD)
+ board_rev &= ~(J1_B2_BOARD |
+ LIMO_UNIVERSAL_BOARD);
+ if (rev & MEDIA_BOARD)
+ board_rev &= ~(J1_B2_BOARD |
+ LIMO_UNIVERSAL_BOARD);
+ if (rev & BAMBOO_BOARD)
+ board_rev &= ~(J1_B2_BOARD |
+ LIMO_UNIVERSAL_BOARD |
+ LIMO_REAL_BOARD |
+ MEDIA_BOARD);
+ } else if (board == MACH_GONI) {
+ if (rev & KESSLER_BOARD)
+ board_rev &= ~(J1_B2_BOARD |
+ LIMO_UNIVERSAL_BOARD);
+ if (rev & SDK_BOARD)
+ board_rev &= ~(J1_B2_BOARD |
+ LIMO_UNIVERSAL_BOARD);
+ if (rev & S1_BOARD)
+ board_rev &= ~(J1_B2_BOARD | LIMO_UNIVERSAL_BOARD |
+ LIMO_REAL_BOARD);
+ } else {
+ board_rev &= ~BOARD_MASK;
+ }
+}
+
- struct s5pc1xx_gpio_bank *bank;
++static unsigned int get_hw_revision(struct s5p_gpio_bank *bank, int hwrev3)
+{
+ unsigned int rev;
+
+ gpio_direction_input(bank, 2);
+ gpio_direction_input(bank, 3);
+ gpio_direction_input(bank, 4);
+ gpio_direction_input(bank, hwrev3);
+
+ gpio_set_pull(bank, 2, GPIO_PULL_NONE); /* HWREV_MODE0 */
+ gpio_set_pull(bank, 3, GPIO_PULL_NONE); /* HWREV_MODE1 */
+ gpio_set_pull(bank, 4, GPIO_PULL_NONE); /* HWREV_MODE2 */
+ gpio_set_pull(bank, hwrev3, GPIO_PULL_NONE); /* HWREV_MODE3 */
+
+ rev = gpio_get_value(bank, 2);
+ rev |= (gpio_get_value(bank, 3) << 1);
+ rev |= (gpio_get_value(bank, 4) << 2);
+ rev |= (gpio_get_value(bank, hwrev3) << 3);
+
+ return rev;
+}
+
+static void check_hw_revision(void)
+{
+ unsigned int board = MACH_UNIVERSAL; /* Default is Universal */
+
+ if (cpu_is_s5pc100()) {
+ struct s5pc100_gpio *gpio =
+ (struct s5pc100_gpio *)S5PC100_GPIO_BASE;
+
+ board_rev = get_hw_revision(&gpio->gpio_j0, 0);
+
+ /* C100 TickerTape */
+ if (board_rev == 3)
+ board = MACH_TICKERTAPE;
+ } else {
+ struct s5pc110_gpio *gpio =
+ (struct s5pc110_gpio *)S5PC110_GPIO_BASE;
+ int hwrev3 = 1;
+
+ board_rev = 0;
+
+ /*
+ * Note Check 'Aquila' board first
+ *
+ * TT: TickerTape
+ * SS: SplitScreen
+ * LRA: Limo Real Aquila
+ * LUA: Limo Universal Aquila
+ * OA: Old Aquila
+ * CYP: Cypress
+ * BB: Bamboo
+ *
+ * ADDR = 0xE0200000 + OFF
+ *
+ * OFF Universal BB LRA LUA OA TT SS CYP
+ * J1: 0x0264 0x10 0x10 0x00 0x00 0x00 0x00 0x00
+ * J2: 0x0284 0x01 0x10 0x00
+ * H1: 0x0C24 W 0x28 0xA8 0x1C 0x0F
+ * H3: 0x0C64 0x03 0x07 0x0F
+ * D1: 0x00C4 0x0F 0x3F 0x3F 0x0F 0xXC 0x3F
+ * I: 0x0224 0x02 0x00 0x08
+ * MP03: 0x0324 0x9x 0xbx 0x9x
+ * MP05: 0x0364 0x80 0x88
+ */
+
+ /* C110 Aquila */
+ if (gpio_get_value(&gpio->gpio_j1, 4) == 0) {
+ board = MACH_TYPE_AQUILA;
+ board_rev |= J1_B2_BOARD;
+
+ gpio_set_pull(&gpio->gpio_j2, 6, GPIO_PULL_NONE);
+ gpio_direction_input(&gpio->gpio_j2, 6);
+
+ /* Check board */
+ if (gpio_get_value(&gpio->gpio_h1, 2) == 0)
+ board_rev |= LIMO_UNIVERSAL_BOARD;
+
+ if (gpio_get_value(&gpio->gpio_h3, 2) == 0)
+ board_rev |= LIMO_REAL_BOARD;
+
+ if (gpio_get_value(&gpio->gpio_j2, 6) == 1)
+ board_rev |= MEDIA_BOARD;
+
+ /* set gpio to default value. */
+ gpio_set_pull(&gpio->gpio_j2, 6, GPIO_PULL_DOWN);
+ gpio_direction_output(&gpio->gpio_j2, 6, 0);
+ }
+
+ /* Workaround: C110 Aquila Rev0.6 */
+ if (board_rev == 6) {
+ board = MACH_TYPE_AQUILA;
+ board_rev |= LIMO_REAL_BOARD;
+ }
+
+ /* C110 Aquila Bamboo */
+ if (gpio_get_value(&gpio->gpio_j2, 0) == 1) {
+ board = MACH_TYPE_AQUILA;
+ board_rev |= BAMBOO_BOARD;
+ }
+
+ /* C110 TickerTape */
+ if (gpio_get_value(&gpio->gpio_d1, 0) == 0 &&
+ gpio_get_value(&gpio->gpio_d1, 1) == 0)
+ board = MACH_TICKERTAPE;
+
+ /* WMG160 - GPH3[0:4] = 0x00 */
+ if (board == MACH_TICKERTAPE) {
+ int i, wmg160 = 1;
+
+ for (i = 0; i < 4; i++) {
+ if (gpio_get_value(&gpio->gpio_h3, i) != 0) {
+ wmg160 = 0;
+ break;
+ }
+ }
+ if (wmg160) {
+ board = MACH_WMG160;
+ hwrev3 = 7;
+ }
+ }
+
+ /* C110 Geminus for rev0.0 */
+ gpio_set_pull(&gpio->gpio_j1, 2, GPIO_PULL_NONE);
+ gpio_direction_input(&gpio->gpio_j1, 2);
+ if (gpio_get_value(&gpio->gpio_j1, 2) == 1) {
+ board = MACH_GEMINUS;
+ if ((board_rev & ~BOARD_MASK) == 3)
+ board_rev &= ~0xff;
+ }
+ gpio_set_pull(&gpio->gpio_j1, 2, GPIO_PULL_DOWN);
+ gpio_direction_output(&gpio->gpio_j1, 2, 0);
+
+ /* C110 Geminus for rev0.1 ~ */
+ gpio_set_pull(&gpio->gpio_j0, 6, GPIO_PULL_NONE);
+ gpio_direction_input(&gpio->gpio_j0, 6);
+ if (gpio_get_value(&gpio->gpio_j0, 6) == 1) {
+ board = MACH_GEMINUS;
+ hwrev3 = 7;
+ }
+ gpio_set_pull(&gpio->gpio_j0, 6, GPIO_PULL_DOWN);
+
+ /* Kessler MP0_5[6] == 1 */
+ gpio_direction_input(&gpio->gpio_mp0_5, 6);
+ if (gpio_get_value(&gpio->gpio_mp0_5, 6) == 1) {
+ /* Cypress: Do this for cypress */
+ gpio_set_pull(&gpio->gpio_j2, 2, GPIO_PULL_NONE);
+ gpio_direction_input(&gpio->gpio_j2, 2);
+ if (gpio_get_value(&gpio->gpio_j2, 2) == 1) {
+ board = MACH_CYPRESS;
+ gpio_direction_output(&gpio->gpio_mp0_5, 6, 0);
+ } else {
+ board = MACH_GONI;
+ board_rev |= KESSLER_BOARD;
+
+ /* Limo SDK MP0_5[4] == 1 */
+ gpio_direction_input(&gpio->gpio_mp0_5, 4);
+ if (gpio_get_value(&gpio->gpio_mp0_5, 4) == 1) {
+ board_rev &= ~KESSLER_BOARD;
+ board_rev |= SDK_BOARD;
+ }
+ }
+ gpio_set_pull(&gpio->gpio_j2, 2, GPIO_PULL_DOWN);
+ hwrev3 = 7;
+ } else {
+ gpio_direction_output(&gpio->gpio_mp0_5, 6, 0);
+ /* Goni S1 board detection */
+ if (board == MACH_TICKERTAPE) {
+ board = MACH_GONI;
+ board_rev |= S1_BOARD;
+ hwrev3 = 7;
+ }
+ }
+
+ board_rev |= get_hw_revision(&gpio->gpio_j0, hwrev3);
+ }
+
+ /* Set machine id */
+ if (board < MACH_PSEUDO_END) {
+ if (cpu_is_s5pc110())
+ gd->bd->bi_arch_number = C110_MACH_START + board;
+ else
+ gd->bd->bi_arch_number = C100_MACH_START + board;
+ } else {
+ gd->bd->bi_arch_number = board;
+ }
+
+ /* Architecture Common settings */
+ if (cpu_is_s5pc110()) {
+ setenv("mtdparts", MTDPARTS_DEFAULT_4KB);
+ } else {
+ setenv("bootk", "onenand read 0x30007FC0 0x60000 0x300000; "
+ "bootm 0x30007FC0");
+ setenv("updatek", "onenand erase 0x60000 0x300000; "
+ "onenand write 0x31008000 0x60000 0x300000");
+ }
+}
+
+static void show_hw_revision(void)
+{
+ int board;
+
+ /*
+ * Workaround for Rev 0.3 + CP Ver ES 3.1
+ * it's Rev 0.4
+ */
+ if (board_is_limo_real()) {
+ if (hwrevision(0)) {
+ /* default is Rev 0.4 */
+ board_rev &= ~0xf;
+ board_rev |= 0x4;
+ }
+ }
+
+ if (mach_is_goni() || mach_is_aquila())
+ board = gd->bd->bi_arch_number;
+ else if (cpu_is_s5pc110())
+ board = gd->bd->bi_arch_number - C110_MACH_START;
+ else
+ board = gd->bd->bi_arch_number - C100_MACH_START;
+
+ check_board_revision(board, board_rev);
+
+ /* Set CPU Revision */
+ if (mach_is_aquila()) {
+ if (board_is_limo_real()) {
+ if ((board_rev & 0xf) < 8)
+ s5pc1xx_set_cpu_rev(0);
+ }
+ else if (board_is_bamboo())
+ s5pc1xx_set_cpu_rev(0);
+ } else if (mach_is_goni()) {
+ if (board_is_sdk() && (hwrevision(2) || hwrevision(4)))
+ s5pc1xx_set_cpu_rev(2); /* EVT1-Fused */
+ else
+ s5pc1xx_set_cpu_rev(1);
+ } else if (mach_is_geminus()) {
+ if ((board_rev & 0xf) < 1)
+ s5pc1xx_set_cpu_rev(0);
+ } else if (mach_is_cypress()) {
+ s5pc1xx_set_cpu_rev(1);
+ } else {
+ s5pc1xx_set_cpu_rev(0);
+ }
+
+ if (cpu_is_s5pc110())
+ writel(0xc1100000 | (0xffff & (s5pc1xx_get_cpu_rev() ? 1 : 0)),
+ S5PC110_INFORM3);
+
+ empty_device_info_buffer();
+ dprintf("HW Revision:\t%x (%s%s) %s\n",
+ board_rev, get_board_name(board),
+ display_features(board, board_rev),
+ s5pc1xx_get_cpu_rev() ? "" : "EVT0");
+}
+
+static void check_auto_burn(void)
+{
+ unsigned long magic_base = CONFIG_SYS_SDRAM_BASE + 0x02000000;
+ unsigned int count = 0;
+ char buf[64];
+
+ if (readl(magic_base) == 0x426f6f74) { /* ASICC: Boot */
+ puts("Auto burning bootloader\n");
+ count += sprintf(buf + count, "run updateb; ");
+ }
+ if (readl(magic_base + 0x04) == 0x4b65726e) { /* ASICC: Kern */
+ puts("Auto burning kernel\n");
+ count += sprintf(buf + count, "run updatek; ");
+ }
+
+ if (count) {
+ count += sprintf(buf + count, "reset");
+ setenv("bootcmd", buf);
+ }
+
+ /* Clear the magic value */
+ writel(0xa5a55a5a, magic_base);
+ writel(0xa5a55a5a, magic_base + 0x4);
+}
+
+static void pmic_pin_init(void)
+{
+ unsigned int reg, value;
+
+ if (cpu_is_s5pc100())
+ return;
+
+ /* AP_PS_HOLD: XEINT_0: GPH0[0]
+ * Note: Don't use GPIO PS_HOLD it doesn't work
+ */
+ reg = S5PC110_PS_HOLD_CONTROL;
+ value = readl(reg);
+ value |= S5PC110_PS_HOLD_DIR_OUTPUT |
+ S5PC110_PS_HOLD_DATA_HIGH |
+ S5PC110_PS_HOLD_OUT_EN;
+ writel(value, reg);
+
+ /* nPOWER: XEINT_22: GPH2[6] interrupt mode */
+ gpio_cfg_pin(&s5pc110_gpio->gpio_h2, 6, GPIO_IRQ);
+ gpio_set_pull(&s5pc110_gpio->gpio_h2, 6, GPIO_PULL_UP);
+}
+
+static void enable_ldos(void)
+{
+ if (cpu_is_s5pc100())
+ return;
+
+ /* TOUCH_EN: XMMC3DATA_3: GPG3[6] output high */
+ gpio_direction_output(&s5pc110_gpio->gpio_g3, 6, 1);
+}
+
+static void enable_t_flash(void)
+{
+ if (!(board_is_limo_universal() || board_is_limo_real()))
+ return;
+
+ /* T_FLASH_EN : XM0ADDR_13: MP0_5[4] output high */
+ gpio_direction_output(&s5pc110_gpio->gpio_mp0_5, 4, 1);
+}
+
+static void setup_limo_real_gpios(void)
+{
+ if (!board_is_limo_real())
+ return;
+
+ /*
+ * Note: Please write GPIO alphabet order
+ */
+ /* CODEC_LDO_EN: XVVSYNC_LDI: GPF3[4] output high */
+ gpio_direction_output(&s5pc110_gpio->gpio_f3, 4, 1);
+
+ if (hwrevision(0))
+ /* RESET_REQ_N: XM0BEN_1: MP0_2[1] output high */
+ gpio_direction_output(&s5pc110_gpio->gpio_mp0_2, 1, 1);
+ else
+ /* RESET_REQ_N: XM0CSn_2: MP0_1[2] output high */
+ gpio_direction_output(&s5pc110_gpio->gpio_mp0_1, 2, 1);
+
+ /* T_FLASH_DETECT: EINT28: GPH3[4] interrupt mode */
+ gpio_cfg_pin(&s5pc110_gpio->gpio_h3, 4, GPIO_IRQ);
+ gpio_set_pull(&s5pc110_gpio->gpio_h3, 4, GPIO_PULL_UP);
+}
+
+static void setup_media_gpios(void)
+{
+ if (!board_is_media())
+ return;
+
+ /*
+ * Note: Please write GPIO alphabet order
+ */
+ /* RESET_REQ_N: XM0CSn_2: MP0_1[2] output high */
+ gpio_direction_output(&s5pc110_gpio->gpio_mp0_1, 2, 1);
+
+ /* T_FLASH_DETECT: EINT28: GPH3[4] interrupt mode */
+ gpio_cfg_pin(&s5pc110_gpio->gpio_h3, 4, GPIO_IRQ);
+ gpio_set_pull(&s5pc110_gpio->gpio_h3, 4, GPIO_PULL_UP);
+}
+
+#define KBR3 (1 << 3)
+#define KBR2 (1 << 2)
+#define KBR1 (1 << 1)
+#define KBR0 (1 << 0)
+
+static void check_keypad(void)
+{
+ unsigned int reg, value;
+ unsigned int col_num, row_num;
+ unsigned int col_mask;
+ unsigned int col_mask_shift;
+ unsigned int row_state[4];
+ unsigned int i;
+ unsigned int auto_download = 0;
+
+ if (mach_is_wmg160())
+ return;
+
+ if (cpu_is_s5pc100()) {
+ struct s5pc100_gpio *gpio =
+ (struct s5pc100_gpio *)S5PC100_GPIO_BASE;
+
+ row_num = 3;
+ col_num = 3;
+
+ /* Set GPH2[2:0] to KP_COL[2:0] */
+ gpio_cfg_pin(&gpio->gpio_h2, 0, 0x3);
+ gpio_cfg_pin(&gpio->gpio_h2, 1, 0x3);
+ gpio_cfg_pin(&gpio->gpio_h2, 2, 0x3);
+
+ /* Set GPH3[2:0] to KP_ROW[2:0] */
+ gpio_cfg_pin(&gpio->gpio_h3, 0, 0x3);
+ gpio_cfg_pin(&gpio->gpio_h3, 1, 0x3);
+ gpio_cfg_pin(&gpio->gpio_h3, 2, 0x3);
+
+ reg = S5PC100_KEYPAD_BASE;
+ col_mask = S5PC1XX_KEYIFCOL_MASK;
+ col_mask_shift = 0;
+ } else {
+ if (board_is_limo_real() || board_is_limo_universal()) {
+ row_num = 2;
+ col_num = 3;
+ } else {
+ row_num = 4;
+ col_num = 4;
+ }
+
+ for (i = 0; i < row_num; i++) {
+ if (board_is_sdk() && (hwrevision(3) || hwrevision(4)) && i == 0) {
+ continue;
+ }
+ /* Set GPH3[3:0] to KP_ROW[3:0] */
+ gpio_cfg_pin(&s5pc110_gpio->gpio_h3, i, 0x3);
+ gpio_set_pull(&s5pc110_gpio->gpio_h3, i, GPIO_PULL_UP);
+ }
+
+ for (i = 0; i < col_num; i++)
+ /* Set GPH2[3:0] to KP_COL[3:0] */
+ gpio_cfg_pin(&s5pc110_gpio->gpio_h2, i, 0x3);
+
+ reg = S5PC110_KEYPAD_BASE;
+ col_mask = S5PC110_KEYIFCOLEN_MASK;
+ col_mask_shift = 8;
+ }
+
+ /* KEYIFCOL reg clear */
+ writel(0, reg + S5PC1XX_KEYIFCOL_OFFSET);
+
+ /* key_scan */
+ for (i = 0; i < col_num; i++) {
+ value = col_mask;
+ value &= ~(1 << i) << col_mask_shift;
+
+ writel(value, reg + S5PC1XX_KEYIFCOL_OFFSET);
+ udelay(1000);
+
+ value = readl(reg + S5PC1XX_KEYIFROW_OFFSET);
+ row_state[i] = ~value & ((1 << row_num) - 1);
+ if (row_state[i])
+ printf("[%d col] row_state: 0x%x\n", i, row_state[i]);
+ }
+
+ /* KEYIFCOL reg clear */
+ writel(0, reg + S5PC1XX_KEYIFCOL_OFFSET);
+
+ if (mach_is_aquila() || mach_is_goni()) {
+ /* volume down */
+ if (row_state[1] & 0x2)
+ display_info = 1;
+ if (board_is_sdk() && hwrevision(0)) {
+ /* home & volume down */
+ if ((row_state[1] & 0x1) && (row_state[1] & 0x2))
+ auto_download = 1;
+ } else if (board_is_sdk() && hwrevision(2)) {
+ /* cam full shot & volume down */
+ if ((row_state[1] & 0x6) && (row_state[2] & 0x4))
+ auto_download = 1;
+ } else if (board_is_sdk() && (hwrevision(3) || hwrevision(4))) {
+ /* cam full shot & volume down */
+ if ((row_state[1] & 0x6) && (row_state[2] & 0x4))
+ auto_download = 1;
+ } else {
+ /* cam full shot & volume down */
+ if ((row_state[0] & 0x1) && (row_state[1] & 0x2))
+ auto_download = 1;
+ }
+ } else if (mach_is_geminus())
+ /* volume down & home */
+ if ((row_state[1] & 0x2) && (row_state[2] & 0x1))
+ auto_download = 1;
+
+ if (auto_download)
+ setenv("bootcmd", "usbdown");
+}
+
+static void check_battery(int mode)
+{
+ unsigned char val[2];
+ unsigned char addr = 0x36; /* max17040 fuel gauge */
+
+ i2c_set_bus_num(I2C_GPIO3);
+
+ if (mach_is_aquila()) {
+ if (board_is_j1b2())
+ return;
+ } else if (mach_is_goni()) {
+ i2c_set_bus_num(I2C_GPIO7);
+ } else if (mach_is_cypress()) {
+ i2c_set_bus_num(I2C_GPIO7);
+ } else if (mach_is_geminus()) {
+ if (hwrevision(1))
+ i2c_set_bus_num(I2C_GPIO7);
+ } else
+ return;
+
+ if (i2c_probe(addr)) {
+ puts("Can't found max17040 fuel gauge\n");
+ return;
+ }
+
+ /* mode 0: check mode / 1: enable mode */
+ if (mode) {
+ val[0] = 0x54;
+ val[1] = 0x00;
+ i2c_write(addr, 0xfe, 1, val, 2);
+ } else {
+ i2c_read(addr, 0x04, 1, val, 1);
+ dprintf("battery:\t%d%%\n", val[0]);
+ battery_soc = val[0];
+ }
+}
+
+static void check_mhl(void)
+{
+ unsigned char val[2];
+ unsigned char addr = 0x39; /* SIL9230 */
+
+ /* MHL Power enable */
+ /* HDMI_EN : GPJ2[2] XMSMDATA_2 output mode */
+ gpio_direction_output(&s5pc110_gpio->gpio_j2, 2, 1);
+
+ /* MHL_RST : MP0_4[7] XM0ADDR_7 output mode */
+ gpio_direction_output(&s5pc110_gpio->gpio_mp0_4, 7, 0);
+
+ /* 10ms required after reset */
+ udelay(10000);
+
+ /* output enable */
+ gpio_set_value(&s5pc110_gpio->gpio_mp0_4, 7, 1);
+
+ i2c_set_bus_num(I2C_GPIO5);
+
+ /* set usb path */
+ if (i2c_probe(addr)) {
+ puts("Can't found MHL Chip\n");
+ return;
+ }
+
+ /*
+ * System Control #1
+ * set to Normal operation
+ */
+ val[0] = 0x35;
+ i2c_write((0x72 >> 1), 0x08, 1, val, 1);
+ i2c_read((0x72 >> 1), 0x08, 1, val, 1);
+
+ /*
+ * MHL TX Control #1
+ * TERM_MODE [7:6]
+ * 00 = MHL termination ON
+ * 11 = MHL termination OFF
+ */
+ val[0] = 0xd0;
+ i2c_write((0x72 >> 1), 0xa0, 1, val, 1);
+ i2c_read((0x72 >> 1), 0xa0, 1, val, 1);
+}
+
+static int max8998_probe(void)
+{
+ unsigned char addr = 0xCC >> 1;
+
+ i2c_set_bus_num(I2C_PMIC);
+
+ if (i2c_probe(addr)) {
+ puts("Can't found max8998\n");
+ return 1;
+ }
+
+ return 0;
+}
+
+#define CHARGER_ANIMATION_FRAME 6
+static void max8998_clear_interrupt(void)
+{
+ unsigned char addr, val[2];
+ addr = 0xCC >> 1;
+
+ if (max8998_probe())
+ return;
+
+ i2c_read(addr, 0x00, 1, val, 1);
+ i2c_read(addr, 0x01, 1, val, 1);
+ i2c_read(addr, 0x02, 1, val, 1);
+ i2c_read(addr, 0x03, 1, val, 1);
+}
+
+static int max8998_power_key(void)
+{
+ unsigned char addr, val[2];
+ addr = 0xCC >> 1;
+
+ if (max8998_probe())
+ return 0;
+
+ /* Accessing IRQ1 register */
+ i2c_read(addr, 0x00, 1, val, 1);
+ if (val[0] & (1 << 6))
+ return 1;
+
+ return 0;
+}
+
+static int max8998_has_ext_power_source(void)
+{
+ unsigned char addr, val[2];
+ addr = 0xCC >> 1;
+
+ if (max8998_probe())
+ return 0;
+
+ /* Accessing STATUS2 register */
+ i2c_read(addr, 0x09, 1, val, 1);
+ if (val[0] & (1 << 5))
+ return 1;
+
+ return 0;
+}
+
+struct thermister_stat {
+ short centigrade;
+ unsigned short adc;
+};
+
+static struct thermister_stat adc_to_temperature_data[] = {
+ { .centigrade = -20, .adc = 1856, },
+ { .centigrade = -15, .adc = 1799, },
+ { .centigrade = -10, .adc = 1730, },
+ { .centigrade = -5, .adc = 1649, },
+ { .centigrade = 0, .adc = 1556, },
+ { .centigrade = 5, .adc = 1454, },
+ { .centigrade = 10, .adc = 1343, },
+ { .centigrade = 15, .adc = 1227, },
+ { .centigrade = 20, .adc = 1109, },
+ { .centigrade = 25, .adc = 992, },
+ { .centigrade = 30, .adc = 880, },
+ { .centigrade = 35, .adc = 773, },
+ { .centigrade = 40, .adc = 675, },
+ { .centigrade = 45, .adc = 586, },
+ { .centigrade = 50, .adc = 507, },
+ { .centigrade = 55, .adc = 436, },
+ { .centigrade = 58, .adc = 399, },
+ { .centigrade = 63, .adc = 343, },
+ { .centigrade = 65, .adc = 322, },
+};
+
+#ifndef USHRT_MAX
+#define USHRT_MAX 0xFFFFU
+#endif
+static int adc_to_temperature_centigrade(unsigned short adc)
+{
+ int i;
+ int approximation;
+ /* low_*: Greatest Lower Bound,
+ * * * * high_*: Smallest Upper Bound */
+ int low_temp = 0, high_temp = 0;
+ unsigned short low_adc = 0, high_adc = USHRT_MAX;
+ for (i = 0; i < ARRAY_SIZE(adc_to_temperature_data); i++) {
+ if (adc_to_temperature_data[i].adc <= adc &&
+ adc_to_temperature_data[i].adc >= low_adc) {
+ low_temp = adc_to_temperature_data[i].centigrade;
+ low_adc = adc_to_temperature_data[i].adc;
+ }
+ if (adc_to_temperature_data[i].adc >= adc &&
+ adc_to_temperature_data[i].adc <= high_adc) {
+ high_temp = adc_to_temperature_data[i].centigrade;
+ high_adc = adc_to_temperature_data[i].adc;
+ }
+ }
+
+ /* Linear approximation between cloest low and high,
+ * which is the weighted average of the two. */
+
+ /* The following equation is correct only when the two are different */
+ if (low_adc == high_adc)
+ return low_temp;
+ if (ARRAY_SIZE(adc_to_temperature_data) < 2)
+ return 20; /* The room temperature */
+ if (low_adc == 0)
+ return high_temp;
+ if (high_adc == USHRT_MAX)
+ return low_temp;
+
+ approximation = low_temp * (adc - low_adc) +
+ high_temp * (high_adc - adc);
+ approximation /= high_adc - low_adc;
+
+ return approximation;
+}
+
+static unsigned short get_adc_value(int channel)
+{
+ struct s5pc110_adc *adc = (struct s5pc110_adc *) S5PC110_ADC_BASE;
+ unsigned short ret = 0;
+ unsigned int reg;
+ int ldonum = 8;
+ char buf[64];
+ unsigned int loop = 0;
+
+ if (mach_is_goni())
+ ldonum = 4;
+ else if (mach_is_geminus())
+ ldonum = 4;
+ else if (mach_is_wmg160())
+ ldonum = 4;
+ else if (mach_is_cypress())
+ ldonum = 8;
+ else if (mach_is_tickertape())
+ ldonum = 8;
+ else if (mach_is_aquila())
+ ldonum = 8;
+ /*
+ else if (mach_is_p1p2())
+ ldonum = 4;
+ */
+
+ sprintf(buf, "pmic ldo %d on", ldonum);
+ run_command(buf, 0);
+
+ writel(channel & 0xF, &adc->adcmux);
+ writel((1 << 14) | (49 << 6), &adc->adccon);
+ writel(1000 & 0xffff, &adc->adcdly);
+ writel(readl(&adc->adccon) | (1 << 16), &adc->adccon); /* 12 bit */
+ udelay(10);
+ writel(readl(&adc->adccon) | (1 << 0), &adc->adccon); /* Enable */
+ udelay(10);
+
+ do {
+ udelay(1);
+ reg = readl(&adc->adccon);
+ } while (!(reg & (1 << 15)) && (loop++ < 1000));
+
+ ret = readl(&adc->adcdat0) & 0xFFF;
+ sprintf(buf, "pmic ldo %d off", ldonum);
+ run_command(buf, 0);
+
+ return ret;
+}
+
+static int adc_get_average_ambient_temperature(void)
+{
+ if (mach_is_goni()) {
+ unsigned short min = USHRT_MAX;
+ unsigned short max = 0;
+ unsigned int sum = 0;
+ unsigned int measured = 0;
+ int i;
+
+ for (i = 0; i < 7; i++) {
+ unsigned short measurement = get_adc_value(6);
+ sum += measurement;
+ measured++;
+ if (min > measurement)
+ min = measurement;
+ if (max < measurement)
+ max = measurement;
+ }
+ if (measured >= 3) {
+ measured -= 2;
+ sum -= min;
+ sum -= max;
+ }
+ sum /= measured;
+ printf("Average Ambient Temperature = %d(ADC=%d)\n",
+ adc_to_temperature_centigrade(sum), sum);
+ return adc_to_temperature_centigrade(sum);
+ }
+
+ return 20; /* 20 Centigrade */
+}
+
+enum temperature_level {
+ _TEMP_OK,
+ _TEMP_OK_HIGH,
+ _TEMP_OK_LOW,
+ _TEMP_TOO_HIGH,
+ _TEMP_TOO_LOW,
+};
+
+static enum temperature_level temperature_check(void)
+{
+ int temp = adc_get_average_ambient_temperature();
+ if (temp < -5)
+ return _TEMP_TOO_LOW;
+ if (temp < 0)
+ return _TEMP_OK_LOW;
+ if (temp > 63)
+ return _TEMP_TOO_HIGH;
+ if (temp > 58)
+ return _TEMP_OK_HIGH;
+ return _TEMP_OK;
+}
+
+extern void lcd_display_clear(void);
+extern int lcd_display_bitmap(ulong bmp_image, int x, int y);
+
+static void charger_en(int enable)
+{
+ /* 0: disable
+ * 600: 600mA
+ * 475: 475mA
+ */
+ unsigned char addr = 0xCC >> 1; /* max8998 */
+ unsigned char val[2];
+
+ if (max8998_probe())
+ return;
+
+ if (!enable) {
+ puts("Disable the charger.\n");
+ i2c_read(addr, 0x0D, 1, val, 1);
+ val[0] &= ~(0x1);
+ val[0] |= 0x1;
+ i2c_write(addr, 0x0D, 1, val, 1);
+ } else {
+ i2c_read(addr, 0x0C, 1, val, 1);
+ val[0] &= ~(0x7 << 0);
+ val[0] &= ~(0x7 << 5);
+ if (enable == 600) {
+ val[0] |= 5; /* 600mA */
+ val[0] |= (3 << 5); /* Stop at 150mA (25%) */
+ } else { /* Assume 475 mA */
+ enable = 475;
+ val[0] |= 2; /* 475mA */
+ val[0] |= (4 << 5); /* Stop at 142.5mA (30%) */
+ }
+ i2c_write(addr, 0x0C, 1, val, 1);
+
+ i2c_read(addr, 0x0D, 1, val, 1);
+ val[0] &= ~(0x1);
+ i2c_write(addr, 0x0D, 1, val, 1);
+ printf("Enable the charger @ %dmA\n", enable);
+ }
+}
+
+void lcd_power_on(unsigned int onoff);
+extern int do_sleep (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
+extern int drv_lcd_init_resume (void);
+
+static void into_charge_mode(void)
+{
+ unsigned int level;
+ int i, j;
+ bmp_image_t *bmp;
+ unsigned long len;
+ ulong bmp_addr[CHARGER_ANIMATION_FRAME];
+ unsigned int reg, wakeup_stat;
+ int charger_speed = 600;
+
+ max8998_clear_interrupt();
+
+ puts("Charge Mode\n");
+ charger_en(charger_speed);
+
+#ifdef CONFIG_S5PC1XXFB
+ init_font();
+
+ /* TODO: write the image-text for the charger */
+
+ level = battery_soc * CHARGER_ANIMATION_FRAME / 100;
+ if (level >= CHARGER_ANIMATION_FRAME)
+ level = CHARGER_ANIMATION_FRAME - 1;
+
+ for (i = 0; i < CHARGER_ANIMATION_FRAME; i++)
+ bmp_addr[i] = (ulong)battery_charging_animation[i];
+
+ lcd_display_clear();
+ for (i = 0; i < 3; i++) {
+ for (j = level; j < CHARGER_ANIMATION_FRAME; j++) {
+ int k;
+
+ bmp = gunzip_bmp(bmp_addr[j], &len);
+ lcd_display_bitmap((ulong)bmp, 140, 202);
+ free(bmp);
+
+ for (k = 0; k < 10; k++) {
+ if (max8998_power_key()) {
+ lcd_display_clear();
+ goto restore_screen;
+ } else if (!max8998_has_ext_power_source()) {
+ lcd_display_clear();
+ goto restore_screen;
+ } else {
+ udelay(100 * 1000);
+ }
+ }
+ }
+ }
+ exit_font();
+
+ /* Disable the display to prevent flickering */
+ /* TODO: how to reenable the display later? */
+ lcd_power_on(0);
+#endif
+
+ do {
+ struct s5pc110_rtc *rtc = (struct s5pc110_rtc *)S5PC110_RTC_BASE;
+ unsigned int org, org_ip3;
+ enum temperature_level previous_state = _TEMP_OK;
+
+ empty_device_info_buffer();
+ if (max8998_power_key())
+ break;
+ else if (!max8998_has_ext_power_source())
+ break;
+
+ /* Enable RTC, SYSTIMER, ADC at CLKGATE IP3 */
+ org_ip3 = readl(0xE010046C);
+ writel(org_ip3 | (1 << 15) | (1 << 16) | (1 << 24), 0xE010046C);
+
+ reg = org = readl(&rtc->rtccon);
+ reg |= (1 << 0);
+ writel(reg, &rtc->rtccon);
+
+ reg = readl(&rtc->rtccon);
+ writel(reg | (1 << 3), &rtc->rtccon);
+ udelay(10);
+ writel(reg & ~(1 << 3), &rtc->rtccon);
+ udelay(10);
+
+ reg = readl(&rtc->rtccon);
+ reg &= ~((1 << 8) | (0xF << 4));
+ reg |= (1 << 8) | (0xD << 4); /* D: 4 Hz, 9: 64 Hz */
+ writel(reg, &rtc->rtccon);
+
+ reg = 15 * 4 - 1; /* 15 sec */
+ writel(reg, &rtc->ticcnt);
+
+ /* EVT0: sleep 1, EVT1: sleep */
+ if (cpu_is_s5pc110()) {
+ char *name = "dummy";
+ char *usage = "N/A";
+ char *help = NULL;
+ cmd_tbl_t ctt;
+ ctt.name = name;
+ ctt.usage = usage;
+ ctt.help = help;
+
+ if (s5pc1xx_get_cpu_rev() == 0) {
+ char *argv[] = {"1", "1"};
+ wakeup_stat = do_sleep(&ctt, 0, 2, argv);
+ } else {
+ char *argv[] = {"0", "0"};
+ wakeup_stat = do_sleep(&ctt, 0, 1, argv);
+ }
+ } else {
+ puts("\n\n\nERROR: this is not S5PC110.\n\n\n");
+ return;
+ }
+
+ /* Check TEMP HIGH/LOW */
+ switch (temperature_check()) {
+ case _TEMP_OK:
+ charger_en(charger_speed);
+ previous_state = _TEMP_OK;
+ break;
+ case _TEMP_TOO_LOW:
+ charger_en(0);
+ previous_state = _TEMP_TOO_LOW;
+ break;
+ case _TEMP_TOO_HIGH:
+ charger_en(0);
+ previous_state = _TEMP_TOO_HIGH;
+ break;
+ case _TEMP_OK_LOW:
+ if (previous_state == _TEMP_TOO_LOW) {
+ charger_en(0);
+ } else {
+ charger_en(charger_speed);
+ previous_state = _TEMP_OK;
+ }
+ break;
+ case _TEMP_OK_HIGH:
+ if (previous_state == _TEMP_TOO_HIGH) {
+ charger_en(0);
+ } else {
+ charger_en(charger_speed);
+ previous_state = _TEMP_OK;
+ }
+ break;
+ }
+
+ writel(org, &rtc->rtccon);
+ writel(org_ip3, 0xE010046C);
+
+ } while (wakeup_stat == 0x04); /* RTC TICK */
+
+#ifdef CONFIG_S5PC1XXFB
+restore_screen:
+ /* TODO: Reenable logo display (not working yet) */
+ lcd_power_on(1);
+ drv_lcd_init_resume();
+#endif
+}
+
+#define S5PC110_RST_STAT 0xE010A000
+
+#define SWRESET (1 << 3)
+#define WDTRESET (1 << 2)
+#define WARMRESET (1 << 1)
+#define EXTRESET (1 << 0)
+
+static int get_reset_status(void)
+{
+ return readl(S5PC110_RST_STAT) & 0xf;
+}
+
+static int fsa9480_probe(void)
+{
+ unsigned char addr = 0x25;
+
+ if (cpu_is_s5pc100())
+ return 1;
+
+ if (board_is_limo_real()) {
+ if (hwrevision(0) || hwrevision(1))
+ return 1;
+ }
+
+ i2c_set_bus_num(I2C_PMIC);
+
+ if (mach_is_goni()) {
+ i2c_set_bus_num(I2C_GPIO6);
+ } else if (mach_is_cypress()) {
+ i2c_set_bus_num(I2C_GPIO6);
+ } else if (mach_is_geminus()) {
+ if (hwrevision(1))
+ i2c_set_bus_num(I2C_GPIO6);
+ } else if (mach_is_wmg160()) {
+ i2c_set_bus_num(I2C_GPIO6);
+ }
+
+ if (i2c_probe(addr)) {
+ puts("Can't found fsa9480\n");
+ return 1;
+ }
+
+ return 0;
+}
+
+static void check_micro_usb(int intr)
+{
+ unsigned char addr;
+ unsigned char val[2];
+ static int started_charging_once = 0;
+ char *path;
+
+ if (fsa9480_probe())
+ return;
+
+ addr = 0x25; /* fsa9480 */
+
+ /* Clear Interrupt */
+ if (intr) {
+ i2c_read(addr, 0x03, 1, val, 2);
+ return;
+ }
+
+ /* Read Device Type 1 */
+ i2c_read(addr, 0x0a, 1, val, 1);
+
+#define FSA_DEV1_CHARGER (1 << 6)
+#define FSA_DEV1_UART (1 << 3)
+#define FSA_DEV1_USB (1 << 2)
+#define FSA_DEV2_JIG_USB_OFF (1 << 1)
+#define FSA_DEV2_JIG_USB_ON (1 << 0)
+
+ /*
+ * If USB, use default 475mA
+ * If Charger, use 600mA and go to charge mode
+ */
+ if ((val[0] & FSA_DEV1_CHARGER) && !started_charging_once) {
+ started_charging_once = 1;
+
+ /* If it's full, do not charge. */
+ if (battery_soc < 100)
+ into_charge_mode();
+ else
+ charger_en(0);
+ } else if (val[0] & FSA_DEV1_USB) {
+ if (battery_soc < 100)
+ charger_en(475); /* enable charger and keep booting */
+ else
+ charger_en(0);
+ }
+
+ /* If reset status is watchdog reset then skip it */
+ if (!(get_reset_status() & WDTRESET)) {
+ /* If Factory Mode is Boot ON-USB, go to download mode */
+ i2c_read(addr, 0x07, 1, val, 1);
+
+#define FSA_ADC_FAC_USB_OFF 0x18
+#define FSA_ADC_FAC_USB_ON 0x19
+#define FSA_ADC_FAC_UART 0x1d
+
+ if (val[0] == FSA_ADC_FAC_USB_ON ||
+ val[0] == FSA_ADC_FAC_USB_OFF)
+ setenv("bootcmd", "usbdown");
+ }
+
+ path = getenv("usb");
+
+ if (!strncmp(path, "cp", 2))
+ run_command("microusb cp", 0);
+}
+
+static void micro_usb_switch(int path)
+{
+ unsigned char addr;
+ unsigned char val[2];
+
+ if (fsa9480_probe())
+ return;
+
+ addr = 0x25; /* fsa9480 */
+
+ if (path)
+ val[0] = 0x90; /* VAUDIO */
+ else
+ val[0] = (1 << 5) | (1 << 2); /* DHOST */
+
+ i2c_write(addr, 0x13, 1, val, 1); /* MANSW1 */
+
+ i2c_read(addr, 0x2, 1, val, 1);
+ val[0] &= ~(1 << 2); /* Manual switching */
+ i2c_write(addr, 0x2, 1, val, 1);
+}
+
+#define MAX8998_REG_ONOFF1 0x11
+#define MAX8998_REG_ONOFF2 0x12
+#define MAX8998_REG_ONOFF3 0x13
+#define MAX8998_REG_LDO7 0x21
+#define MAX8998_REG_LDO17 0x29
+/* ONOFF1 */
+#define MAX8998_LDO3 (1 << 2)
+/* ONOFF2 */
+#define MAX8998_LDO6 (1 << 7)
+#define MAX8998_LDO7 (1 << 6)
+#define MAX8998_LDO8 (1 << 5)
+#define MAX8998_LDO9 (1 << 4)
+#define MAX8998_LDO10 (1 << 3)
+#define MAX8998_LDO11 (1 << 2)
+#define MAX8998_LDO12 (1 << 1)
+#define MAX8998_LDO13 (1 << 0)
+/* ONOFF3 */
+#define MAX8998_LDO14 (1 << 7)
+#define MAX8998_LDO15 (1 << 6)
+#define MAX8998_LDO16 (1 << 5)
+#define MAX8998_LDO17 (1 << 4)
+
+
+static void init_pmic(void)
+{
+ unsigned char addr;
+ unsigned char val[2];
+
+ if (cpu_is_s5pc100())
+ return;
+
+ addr = 0xCC >> 1; /* max8998 */
+ if (max8998_probe())
+ return;
+
+ /* ONOFF1 */
+ i2c_read(addr, MAX8998_REG_ONOFF1, 1, val, 1);
+ val[0] &= ~MAX8998_LDO3;
+ i2c_write(addr, MAX8998_REG_ONOFF1, 1, val, 1);
+
+ /* ONOFF2 */
+ i2c_read(addr, MAX8998_REG_ONOFF2, 1, val, 1);
+ /*
+ * Disable LDO10(VPLL_1.1V), LDO11(CAM_IO_2.8V),
+ * LDO12(CAM_ISP_1.2V), LDO13(CAM_A_2.8V)
+ */
+ val[0] &= ~(MAX8998_LDO10 | MAX8998_LDO11 |
+ MAX8998_LDO12 | MAX8998_LDO13);
+
+ if (mach_is_goni())
+ val[0] |= MAX8998_LDO7; /* LDO7: VLCD_1.8V */
+
+ i2c_write(addr, MAX8998_REG_ONOFF2, 1, val, 1);
+ i2c_read(addr, MAX8998_REG_ONOFF2, 1, val, 1);
+ /* ONOFF3 */
+ i2c_read(addr, MAX8998_REG_ONOFF3, 1, val, 1);
+ /*
+ * Disable LDO14(CAM_CIF_1.8), LDO15(CAM_AF_3.3V),
+ * LDO16(VMIPI_1.8V), LDO17(CAM_8M_1.8V)
+ */
+ val[0] &= ~(MAX8998_LDO14 | MAX8998_LDO15 |
+ MAX8998_LDO16 | MAX8998_LDO17);
+
+ if (mach_is_goni())
+ val[0] |= MAX8998_LDO17; /* LDO17: VCC_3.0V_LCD */
+
+ i2c_write(addr, MAX8998_REG_ONOFF3, 1, val, 1);
+ i2c_read(addr, MAX8998_REG_ONOFF3, 1, val, 1);
+}
+
+static void setup_power_down_mode_registers(void)
+{
+ struct s5pc110_gpio *gpio = (struct s5pc110_gpio *)S5PC110_GPIO_BASE;
++ struct s5p_gpio_bank *bank;
+ struct gpio_powermode *p;
+ int n_p;
+ struct gpio_external *ge;
+ int n_ge;
+ struct s5pc1xx_gpio_item *mr;
+ int n_mr;
+ int i;
+
+ if (cpu_is_s5pc100())
+ return;
+
+ /* Only Limo real and kessler supports worked for sleep currnet */
+ if (mach_is_aquila()) {
+ if (board_is_limo_real())
+ /* Support */;
+ else
+ return;
+ } else if (mach_is_goni()) {
+ /* Support */;
+ } else if (mach_is_geminus()) {
+ /* Support */;
+ } else {
+ return;
+ }
+
+ if (mach_is_aquila()) {
+ /* Aquila rev 0.8 or lower */
+ p = aquila_powerdown_modes;
+ ge = aquila_external_powerdown_modes;
+ mr = aquila_mirror_powerdown_mode;
+ n_p = ARRAY_SIZE(aquila_powerdown_modes);
+ n_ge = ARRAY_SIZE(aquila_external_powerdown_modes);
+ n_mr = ARRAY_SIZE(aquila_mirror_powerdown_mode);
+ } else if (mach_is_goni()) {
+ /* Aquila rev 0.9 */
+ p = kessler_powerdown_modes;
+ ge = kessler_external_powerdown_modes;
+ mr = kessler_mirror_powerdown_mode;
+ n_p = ARRAY_SIZE(kessler_powerdown_modes);
+ n_ge = ARRAY_SIZE(kessler_external_powerdown_modes);
+ n_mr = ARRAY_SIZE(kessler_mirror_powerdown_mode);
+ } else if (mach_is_geminus()) {
+ if (hwrevision(1)) {
+ /* Same as Aquila rev 0.9 */
+#if 0
+ p = kessler_powerdown_modes;
+ ge = kessler_external_powerdown_modes;
+ mr = kessler_mirror_powerdown_mode;
+ n_p = ARRAY_SIZE(kessler_powerdown_modes);
+ n_ge = ARRAY_SIZE(kessler_external_powerdown_modes);
+ n_mr = ARRAY_SIZE(kessler_mirror_powerdown_mode);
+#else
+ p = aquila_powerdown_modes;
+ ge = aquila_external_powerdown_modes;
+ mr = aquila_mirror_powerdown_mode;
+ n_p = ARRAY_SIZE(aquila_powerdown_modes);
+ n_ge = ARRAY_SIZE(aquila_external_powerdown_modes);
+ n_mr = ARRAY_SIZE(aquila_mirror_powerdown_mode);
+#endif
+ } else if (hwrevision(0)) {
+ /* Same as Aquila rev 0.8 or lower */
+ p = aquila_powerdown_modes;
+ ge = aquila_external_powerdown_modes;
+ mr = aquila_mirror_powerdown_mode;
+ n_p = ARRAY_SIZE(aquila_powerdown_modes);
+ n_ge = ARRAY_SIZE(aquila_external_powerdown_modes);
+ n_mr = ARRAY_SIZE(aquila_mirror_powerdown_mode);
+ } else {
+ return; /* Not supported */
+ }
+ }
+
+ bank = &gpio->gpio_a0;
+
+ for (i = 0; i < n_p; i++, p++, bank++) {
+ writel(p->conpdn, &bank->pdn_con);
+ writel(p->pudpdn, &bank->pdn_pull);
+ }
+ /* M299 */
+ writel(0xff0022b0, (unsigned int *)0xF0000000);
+ writel(0xff0022b0, (unsigned int *)0xF1400000);
+
+ bank = &gpio->gpio_h0;
+
+ for (i = 0; i < n_ge; i++) {
+ writel(ge->con, &bank->con);
+ writel(ge->dat, &bank->dat);
+ writel(ge->pud, &bank->pull);
+
+ bank++;
+ ge++;
+ }
+
+ for (i = 0; i < n_mr; i++) {
+ unsigned int reg = readl(&mr->bank->pdn_con);
+ reg &= ~(0x3 << (mr->number << 1));
+ if (readl(&mr->bank->dat) & (1 << mr->number))
+ reg |= 0x1 << (mr->number << 1);
+ writel(reg, &mr->bank->pdn_con);
+ mr++;
+ }
+}
+
+#ifdef CONFIG_LCD
+#include "../../../drivers/video/s5p-spi.h"
+
+extern void s6e63m0_set_platform_data(struct spi_platform_data *pd);
+extern void s6d16a0x_set_platform_data(struct spi_platform_data *pd);
+extern void ld9040_set_platform_data(struct spi_platform_data *pd);
+
+struct spi_platform_data spi_pd;
+
+struct s5pc110_gpio *gpio_base = (struct s5pc110_gpio *) S5PC110_GPIO_BASE;
+
+void lcd_cfg_gpio(void)
+{
+ unsigned int i, f3_end = 4;
+
+ for (i = 0; i < 8; i++) {
+ /* set GPF0,1,2[0:7] for RGB Interface and Data lines (32bit) */
+ gpio_cfg_pin(&gpio_base->gpio_f0, i, GPIO_FUNC(2));
+ gpio_cfg_pin(&gpio_base->gpio_f1, i, GPIO_FUNC(2));
+ gpio_cfg_pin(&gpio_base->gpio_f2, i, GPIO_FUNC(2));
+ /* pull-up/down disable */
+ gpio_set_pull(&gpio_base->gpio_f0, i, GPIO_PULL_NONE);
+ gpio_set_pull(&gpio_base->gpio_f1, i, GPIO_PULL_NONE);
+ gpio_set_pull(&gpio_base->gpio_f2, i, GPIO_PULL_NONE);
+
+ /* drive strength to max (24bit) */
+ gpio_set_drv(&gpio_base->gpio_f0, i, GPIO_DRV_4X);
+ gpio_set_rate(&gpio_base->gpio_f0, i, GPIO_DRV_SLOW);
+ gpio_set_drv(&gpio_base->gpio_f1, i, GPIO_DRV_4X);
+ gpio_set_rate(&gpio_base->gpio_f1, i, GPIO_DRV_SLOW);
+ gpio_set_drv(&gpio_base->gpio_f2, i, GPIO_DRV_4X);
+ gpio_set_rate(&gpio_base->gpio_f2, i, GPIO_DRV_SLOW);
+ }
+
+ /* set DISPLAY_DE_B pin for dual rgb mode. */
+ if (board_is_media())
+ f3_end = 5;
+
+ for (i = 0; i < f3_end; i++) {
+ /* set GPF3[0:3] for RGB Interface and Data lines (32bit) */
+ gpio_cfg_pin(&gpio_base->gpio_f3, i, GPIO_PULL_UP);
+ /* pull-up/down disable */
+ gpio_set_pull(&gpio_base->gpio_f3, i, GPIO_PULL_NONE);
+ /* drive strength to max (24bit) */
+ gpio_set_drv(&gpio_base->gpio_f3, i, GPIO_DRV_4X);
+ gpio_set_rate(&gpio_base->gpio_f3, i, GPIO_DRV_SLOW);
+ }
+ /* display output path selection (only [1:0] valid) */
+ writel(0x2, 0xE0107008);
+
+ /* gpio pad configuration for LCD reset. */
+ gpio_cfg_pin(&gpio_base->gpio_mp0_5, 5, GPIO_OUTPUT);
+
+ /* gpio pad configuration for LCD ON. */
+ gpio_cfg_pin(&gpio_base->gpio_j1, 3, GPIO_OUTPUT);
+
+ /* LCD_BACKLIGHT_EN */
+ if (mach_is_geminus())
+ gpio_cfg_pin(&gpio_base->gpio_mp0_5, 0, GPIO_OUTPUT);
+ if (board_is_sdk() && hwrevision(0)) {
+ gpio_cfg_pin(&gpio_base->gpio_mp0_4, 4, GPIO_OUTPUT);
+ gpio_direction_output(&gpio_base->gpio_mp0_4, 4, 0);
+ }
+
+ /*
+ * gpio pad configuration for
+ * DISPLAY_CS, DISPLAY_CLK, DISPLAY_SO, DISPLAY_SI.
+ */
+ gpio_cfg_pin(&gpio_base->gpio_mp0_1, 1, GPIO_OUTPUT);
+ gpio_cfg_pin(&gpio_base->gpio_mp0_4, 1, GPIO_OUTPUT);
+ gpio_cfg_pin(&gpio_base->gpio_mp0_4, 2, GPIO_INPUT);
+ gpio_cfg_pin(&gpio_base->gpio_mp0_4, 3, GPIO_OUTPUT);
+
+ if (mach_is_aquila() || mach_is_goni()) {
+ spi_pd.cs_bank = &gpio_base->gpio_mp0_1;
+ spi_pd.cs_num = 1;
+ spi_pd.clk_bank = &gpio_base->gpio_mp0_4;
+ spi_pd.clk_num = 1;
+ spi_pd.si_bank = &gpio_base->gpio_mp0_4;
+ spi_pd.si_num = 3;
+ spi_pd.so_bank = &gpio_base->gpio_mp0_4;
+ spi_pd.so_num = 2;
+
+ if (board_is_sdk() && hwrevision(0))
+ s6d16a0x_set_platform_data(&spi_pd);
+ else if (board_is_sdk() && hwrevision(3))
+ ld9040_set_platform_data(&spi_pd);
+ else {
+ s6e63m0_set_platform_data(&spi_pd);
+ if (board_is_media())
+ spi_pd.set_rev = 1;
+ }
+ }
+
+ if (mach_is_cypress()) {
+#if 0 /* universal cypress */
+ /* FLCD_CS */
+ gpio_cfg_pin(&gpio_base->gpio_mp0_1, 0, GPIO_OUTPUT);
+#endif
+ /* FLCD_CS_S */
+ gpio_cfg_pin(&gpio_base->gpio_mp0_5, 1, GPIO_OUTPUT);
+ /* FLCD_CLK */
+ gpio_cfg_pin(&gpio_base->gpio_mp0_4, 0, GPIO_OUTPUT);
+ /* FLCD_SDI */
+ gpio_cfg_pin(&gpio_base->gpio_mp0_4, 2, GPIO_OUTPUT);
+ /* FLCD_RST_S */
+ gpio_cfg_pin(&gpio_base->gpio_mp0_4, 5, GPIO_OUTPUT);
+ /* FLCD_ON_S */
+ gpio_cfg_pin(&gpio_base->gpio_g2, 2, GPIO_OUTPUT);
+#if 0 /* universal cypress */
+ pd_cs.bank = &gpio_base->gpio_mp0_1;
+ pd_cs.num = 0;
+#endif
+ spi_pd.cs_bank = &gpio_base->gpio_mp0_5;
+ spi_pd.cs_num = 1;
+ spi_pd.clk_bank = &gpio_base->gpio_mp0_4;
+ spi_pd.clk_num = 0;
+ spi_pd.si_bank = &gpio_base->gpio_mp0_4;
+ spi_pd.si_num = 2;
+
+ spi_pd.set_rev = 1;
+
+ /* these data would be sent to s6e63m0 lcd panel driver. */
+ s6e63m0_set_platform_data(&spi_pd);
+ }
+
+ return;
+}
+
+#define SWRST_REG 0x00
+#define LEDCON_REG 0x01
+#define LED_CUR_SET_REG 0x03
+#define LED_CUR_TR_REG 0x08
+
+#define SWRST 0x01
+#define NORMAL_MODE 0x09
+#define CUR_SET 0x63
+#define TR_SET 0x00
+void backlight_on(unsigned int onoff)
+{
+
+ unsigned char addr;
+ unsigned char val[2];
+ struct s5pc110_gpio *gpio = (struct s5pc110_gpio *) S5PC110_GPIO_BASE;
+ printf("%s\n", __func__);
+
+ if (onoff) {
+ if (mach_is_geminus())
+ gpio_set_value(&gpio->gpio_mp0_5, 0, 1);
+ } else {
+ if (mach_is_geminus())
+ gpio_set_value(&gpio->gpio_mp0_5, 0, 0);
+ }
+
+ if (mach_is_goni() && board_is_sdk() && hwrevision(0)) {
+ gpio_set_value(&gpio->gpio_mp0_4, 4, 1);
+ udelay(6);
+
+ i2c_set_bus_num(I2C_GPIO5);
+
+ addr = 0x76;
+ if (i2c_probe(addr)) {
+ if (i2c_probe(addr)) {
+ puts("Can't found s6d16a0x backlight i2c\n");
+ return;
+ }
+ }
+ val[0] = SWRST;
+ i2c_write(addr, SWRST_REG, 1, val, 1);
+ /* NORMAL MODE */
+ val[0] = CUR_SET;
+ i2c_write(addr, LED_CUR_SET_REG, 1, val, 1);
+ val[0] = TR_SET;
+ i2c_write(addr, LED_CUR_TR_REG, 1, val, 1);
+ val[0] = NORMAL_MODE;
+ i2c_write(addr, LEDCON_REG, 1, val, 1);
+ udelay(5000);
+ }
+}
+
+void reset_lcd(void)
+{
+ struct s5pc110_gpio *gpio = (struct s5pc110_gpio *) S5PC110_GPIO_BASE;
+
+ if (mach_is_aquila() || mach_is_goni() || mach_is_geminus()) {
+ gpio_set_value(&gpio->gpio_mp0_5, 5, 1);
+ if (board_is_sdk() && (hwrevision(3))) {
+ udelay(10000);
+ gpio_set_value(&gpio->gpio_mp0_5, 5, 0);
+ udelay(10000);
+ gpio_set_value(&gpio->gpio_mp0_5, 5, 1);
+ udelay(100);
+ }
+ }
+ if (mach_is_cypress())
+ gpio_set_value(&gpio->gpio_mp0_4, 5, 1);
+}
+
+void lcd_power_on(unsigned int onoff)
+{
+ struct s5pc110_gpio *gpio = (struct s5pc110_gpio *) S5PC110_GPIO_BASE;
+ if (onoff) {
+ /* TSP_LDO_ON */
+ if (mach_is_aquila() || mach_is_geminus())
+ gpio_set_value(&gpio->gpio_j1, 3, 1);
+
+ if (mach_is_cypress())
+ gpio_set_value(&gpio->gpio_g2, 2, 1);
+
+ if (mach_is_goni()) {
+ unsigned char addr;
+ unsigned char val[2];
+ unsigned char val2[2];
+
+ gpio_set_value(&gpio->gpio_j1, 3, 1);
+
+ addr = 0xCC >> 1; /* max8998 */
+ if (max8998_probe())
+ return;
+
+ i2c_read(addr, MAX8998_REG_ONOFF3, 1, val, 1);
+ val[0] &= ~(MAX8998_LDO17);
+ val[0] |= MAX8998_LDO17; /* LDO17: VCC_3.0V_LCD */
+ i2c_write(addr, MAX8998_REG_ONOFF3, 1, val, 1);
+
+ i2c_read(addr, MAX8998_REG_ONOFF3, 1, val, 1);
+ val[0] |= MAX8998_LDO17;
+ val2[0] = 0xE;
+ i2c_write(addr, MAX8998_REG_LDO17, 1, val2, 1);
+ i2c_write(addr, MAX8998_REG_ONOFF3, 1, val, 1);
+
+ i2c_read(addr, MAX8998_REG_ONOFF2, 1, val, 1);
+ val[0] |= MAX8998_LDO7;
+ val2[0] = 0x2;
+ i2c_write(addr, MAX8998_REG_LDO7, 1, val2, 1);
+ i2c_write(addr, MAX8998_REG_ONOFF2, 1, val, 1);
+ }
+ } else {
+ if (mach_is_aquila() || mach_is_geminus())
+ gpio_set_value(&gpio->gpio_j1, 3, 0);
+
+ if (mach_is_cypress())
+ gpio_set_value(&gpio->gpio_g2, 2, 0);
+
+ if (mach_is_goni()) {
+ unsigned char addr;
+ unsigned char val[2];
+
+ gpio_set_value(&gpio->gpio_j1, 3, 0);
+
+ addr = 0xCC >> 1; /* max8998 */
+ if (max8998_probe())
+ return;
+
+ i2c_read(addr, MAX8998_REG_ONOFF2, 1, val, 1);
+ val[0] &= ~(MAX8998_LDO7);
+ i2c_write(addr, MAX8998_REG_ONOFF2, 1, val, 1);
+ i2c_read(addr, MAX8998_REG_ONOFF2, 1, val, 1);
+
+ i2c_read(addr, MAX8998_REG_ONOFF3, 1, val, 1);
+ val[0] &= ~(MAX8998_LDO17);
+ i2c_write(addr, MAX8998_REG_ONOFF3, 1, val, 1);
+ i2c_read(addr, MAX8998_REG_ONOFF3, 1, val, 1);
+ }
+ }
+}
+
+extern void s6e63m0_cfg_ldo(void);
+extern void s6e63m0_enable_ldo(unsigned int onoff);
+extern void s6d16a0x_cfg_ldo(void);
+extern void s6d16a0x_enable_ldo(unsigned int onoff);
+extern void ld9040_cfg_ldo(void);
+extern void ld9040_enable_ldo(unsigned int onoff);
+
+int s5p_no_lcd_support(void)
+{
+ if (mach_is_wmg160())
+ return 1;
+ return 0;
+}
+
+void init_panel_info(vidinfo_t *vid)
+{
+ vid->cfg_gpio = NULL;
+ vid->reset_lcd = NULL;
+ vid->backlight_on = NULL;
+ vid->lcd_power_on = NULL;
+
+ vid->cfg_ldo = NULL;
+ vid->enable_ldo = NULL;
+
+ vid->init_delay = 0;
+ vid->reset_delay = 0;
+ vid->power_on_delay = 0;
+
+ vid->vl_freq = 60;
+ vid->vl_col = 480;
+ vid->vl_row = 800;
+ vid->vl_width = 480;
+ vid->vl_height = 800;
+
+ vid->dual_lcd_enabled = 0;
+
+ if (board_is_media()) {
+ vid->vl_col = 960;
+ vid->vl_row = 800;
+ vid->vl_width = 960;
+ vid->vl_height = 800;
+
+ /* enable dual lcd mode. */
+ vid->dual_lcd_enabled = 1;
+ }
+
+ vid->vl_clkp = CONFIG_SYS_HIGH;
+ vid->vl_hsp = CONFIG_SYS_LOW;
+ vid->vl_vsp = CONFIG_SYS_LOW;
+ vid->vl_dp = CONFIG_SYS_HIGH;
+ vid->vl_bpix = 32;
+
+ /* S6E63M0 LCD Panel */
+ vid->vl_hspw = 2;
+ vid->vl_hbpd = 16;
+ vid->vl_hfpd = 16;
+
+ vid->vl_vspw = 2;
+ vid->vl_vbpd = 3;
+ vid->vl_vfpd = 28;
+
+ if (mach_is_aquila() || mach_is_goni()
+ || mach_is_cypress()) {
+ vid->cfg_gpio = lcd_cfg_gpio;
+ vid->reset_lcd = reset_lcd;
+ vid->backlight_on = backlight_on;
+ vid->lcd_power_on = lcd_power_on;
+ vid->cfg_ldo = s6e63m0_cfg_ldo;
+ vid->enable_ldo = s6e63m0_enable_ldo;
+
+ vid->init_delay = 25000;
+ vid->reset_delay = 120000;
+ }
+
+ if (board_is_sdk() && hwrevision(0)) {
+ vid->vl_freq = 100;
+ vid->vl_col = 320;
+ vid->vl_row = 480;
+ vid->vl_width = 320;
+ vid->vl_height = 480;
+
+ vid->vl_clkp = CONFIG_SYS_HIGH;
+ vid->vl_hsp = CONFIG_SYS_HIGH;
+ vid->vl_vsp = CONFIG_SYS_HIGH;
+ vid->vl_dp = CONFIG_SYS_LOW;
+ vid->vl_bpix = 32;
+
+ /* disable dual lcd mode. */
+ vid->dual_lcd_enabled = 0;
+
+ /* S6D16A0X LCD Panel */
+ vid->vl_hspw = 16;
+ vid->vl_hbpd = 24;
+ vid->vl_hfpd = 16;
+
+ vid->vl_vspw = 2;
+ vid->vl_vbpd = 2;
+ vid->vl_vfpd = 4;
+
+ vid->cfg_gpio = lcd_cfg_gpio;
+ vid->backlight_on = backlight_on;
+ vid->lcd_power_on = lcd_power_on;
+ vid->reset_lcd = reset_lcd;
+ vid->cfg_ldo = s6d16a0x_cfg_ldo;
+ vid->enable_ldo = s6d16a0x_enable_ldo;
+
+ vid->init_delay = 10000;
+ vid->power_on_delay = 10000;
+ vid->reset_delay = 1000;
+
+ }
+ if (board_is_sdk() && hwrevision(3)) {
+ vid->vl_freq = 60;
+ vid->vl_col = 480;
+ vid->vl_row = 800;
+ vid->vl_width = 480;
+ vid->vl_height = 800;
+ vid->vl_clkp = CONFIG_SYS_HIGH;
+ vid->vl_hsp = CONFIG_SYS_HIGH;
+ vid->vl_vsp = CONFIG_SYS_HIGH;
+ vid->vl_dp = CONFIG_SYS_HIGH;
+
+ vid->vl_bpix = 32;
+ /* disable dual lcd mode. */
+ vid->dual_lcd_enabled = 0;
+
+ /* LD9040 LCD Panel */
+ vid->vl_hspw = 2;
+ vid->vl_hbpd = 16;
+ vid->vl_hfpd = 16;
+
+ vid->vl_vspw = 2;
+ vid->vl_vbpd = 3;
+ vid->vl_vfpd = 28;
+
+ vid->cfg_gpio = lcd_cfg_gpio;
+ vid->backlight_on = NULL;
+ vid->lcd_power_on = lcd_power_on;
+ vid->reset_lcd = reset_lcd;
+ vid->cfg_ldo = ld9040_cfg_ldo;
+ vid->enable_ldo = ld9040_enable_ldo;
+
+ vid->init_delay = 0;
+ vid->power_on_delay = 30000;
+ vid->reset_delay = 20000;
+ }
+ if (mach_is_geminus()) {
+ vid->vl_freq = 60;
+ vid->vl_col = 1024,
+ vid->vl_row = 600,
+ vid->vl_width = 1024,
+ vid->vl_height = 600,
+ vid->vl_clkp = CONFIG_SYS_LOW,
+ vid->vl_hsp = CONFIG_SYS_HIGH,
+ vid->vl_vsp = CONFIG_SYS_HIGH,
+ vid->vl_dp = CONFIG_SYS_LOW,
+ vid->vl_bpix = 32,
+
+ vid->vl_hspw = 32,
+ vid->vl_hfpd = 48,
+ vid->vl_hbpd = 80,
+
+ vid->vl_vspw = 1,
+ vid->vl_vfpd = 3,
+ vid->vl_vbpd = 4,
+
+ vid->cfg_gpio = lcd_cfg_gpio;
+ vid->reset_lcd = reset_lcd;
+ vid->backlight_on = backlight_on;
+ vid->lcd_power_on = lcd_power_on;
+ }
+#if 0
+ vid->vl_freq = 60;
+ vid->vl_col = 480,
+ vid->vl_row = 800,
+ vid->vl_width = 480,
+ vid->vl_height = 800,
+ vid->vl_clkp = CONFIG_SYS_HIGH,
+ vid->vl_hsp = CONFIG_SYS_LOW,
+ vid->vl_vsp = CONFIG_SYS_LOW,
+ vid->vl_dp = CONFIG_SYS_HIGH,
+ vid->vl_bpix = 32,
+
+ /* tl2796 panel. */
+ vid->vl_hpw = 4,
+ vid->vl_blw = 8,
+ vid->vl_elw = 8,
+
+ vid->vl_vpw = 4,
+ vid->vl_bfw = 8,
+ vid->vl_efw = 8,
+#endif
+#if 0
+ vid->vl_freq = 60;
+ vid->vl_col = 1024,
+ vid->vl_row = 600,
+ vid->vl_width = 1024,
+ vid->vl_height = 600,
+ vid->vl_clkp = CONFIG_SYS_HIGH,
+ vid->vl_hsp = CONFIG_SYS_HIGH,
+ vid->vl_vsp = CONFIG_SYS_HIGH,
+ vid->vl_dp = CONFIG_SYS_LOW,
+ vid->vl_bpix = 32,
+
+ /* AMS701KA AMOLED Panel. */
+ vid->vl_hpw = 30,
+ vid->vl_blw = 114,
+ vid->vl_elw = 48,
+
+ vid->vl_vpw = 2,
+ vid->vl_bfw = 6,
+ vid->vl_efw = 8,
+#endif
+}
+#endif
+
+static void setup_meminfo(void)
+{
+ char meminfo[64] = {0, };
+ int count = 0, size, real;
+
+ size = gd->bd->bi_dram[0].size >> 20;
+ count += sprintf(meminfo + count, "mem=%dM", size);
+
+ /* Each Chip Select can't exceed the 256MiB */
+ size = gd->bd->bi_dram[1].size >> 20;
+ real = min(size, 256);
+ count += sprintf(meminfo + count, " mem=%dM@0x%x",
+ real, (unsigned int)gd->bd->bi_dram[1].start);
+
+ size -= real;
+ if (size > 0) {
+ count += sprintf(meminfo + count, " mem=%dM@0x%x", size,
+ (unsigned int)gd->bd->bi_dram[1].start + (real << 20));
+ }
+
+ setenv("meminfo", meminfo);
+}
+
+int misc_init_r(void)
+{
+#ifdef CONFIG_LCD
+ /* It should be located at first */
+ lcd_is_enabled = 0;
+
+ if (mach_is_aquila() || mach_is_goni()) {
+ if (board_is_sdk() && hwrevision(0))
+ setenv("lcdinfo", "lcd=s6d16a0x");
+ else if (board_is_sdk() && hwrevision(3))
+ setenv("lcdinfo", "lcd=ld9040");
+ else if (board_is_media())
+ setenv("lcdinfo", "lcd=s6e63m0");
+ else
+ setenv("lcdinfo", "lcd=s6e63m0");
+ }
+ if (mach_is_geminus())
+ setenv("lcdinfo", "lcd=lms480jc01");
+ if (mach_is_cypress())
+ setenv("lcdinfo", "lcd=s6e63m0");
+#endif
+ setup_meminfo();
+
+ show_hw_revision();
+
+ /* Set proper PMIC pins */
+ pmic_pin_init();
+
+ /* Check auto burning */
+ check_auto_burn();
+
+ /* To power up I2C2 */
+ enable_ldos();
+
+ /* Enable T-Flash at Limo Real or Limo Universal */
+ enable_t_flash();
+
+ /* Setup Limo Real board GPIOs */
+ setup_limo_real_gpios();
+
+ /* Setup Media board GPIOs */
+ setup_media_gpios();
+
+ /* To usbdown automatically */
+ check_keypad();
+
+ /* check max8998 */
+ init_pmic();
+
+#ifdef CONFIG_S5PC1XXFB
+ display_device_info();
+#endif
+
+ setup_power_down_mode_registers();
+
+ /* check max17040 */
+ check_battery(0);
+
+ /* check fsa9480 */
+ check_micro_usb(0);
+
+ return 0;
+}
+#endif
+
+int board_init(void)
+{
+ /* Set Initial global variables */
+ s5pc110_gpio = (struct s5pc110_gpio *) S5PC110_GPIO_BASE;
+
+ gd->bd->bi_arch_number = MACH_TYPE_AQUILA;
+ gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100;
+
+#ifdef CONFIG_LCD
+ /*
+ * set reserved memory region for framebuffer.
+ *
+ * this region wouldn't be rewrited by kernel so
+ * could avoid nosie screen filled by garbages
+ * after hibernation resume has been completed.
+ */
+ gd->fb_base = CONFIG_FB_RESERVED_MEM;
+#endif
+
+ /* Check H/W Revision */
+ check_hw_revision();
+
+ return 0;
+}
+
+int dram_init(void)
+{
+ unsigned int base, memconfig0, size;
+ unsigned int memconfig1, sz = 0;
+
+ if (cpu_is_s5pc100()) {
+ /* In mem setup, we swap the bank. So below size is correct */
+ gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
+ gd->bd->bi_dram[0].size = PHYS_SDRAM_2_SIZE;
+ gd->bd->bi_dram[1].start = S5PC100_PHYS_SDRAM_2;
+ size = 128;
+ } else {
+ /* In S5PC110, we can't swap the DMC0/1 */
+ gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
+ gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
+
+ base = S5PC110_DMC1_BASE;
+ /* DMC configuration */
+ memconfig0 = readl(base + MEMCONFIG0_OFFSET);
+ gd->bd->bi_dram[1].start = memconfig0 & 0xFF000000;
+
+ size = (memconfig0 >> 16) & 0xFF;
+ size = ((unsigned char) ~size) + 1;
+
+ /*
+ * (0x07 + 1) * 16 = 128 MiB
+ * (0x0f + 1) * 16 = 256 MiB
+ */
+ size = size << 4;
+
+ /*
+ * Aquila Rev0.5 4G3G1G
+ * Aquila Rev0.8 4G3G1G
+ * Aquila Rev0.9 4G3G1G
+ * Limo SDK Rev 0.2 4G3G1G
+ * Limo SDK Rev 0.3 4G3G1G
+ * Limo SDK Rev 0.4 4G3G1G
+ */
+ if (mach_is_aquila() || mach_is_goni()) {
+ if ((!board_is_sdk() && (hwrevision(5) ||
+ hwrevision(8) || hwrevision(9))) ||
+ (board_is_sdk() && !hwrevision(1))) {
+ memconfig1 = readl(base + MEMCONFIG1_OFFSET);
+
+ sz = (memconfig1 >> 16) & 0xFF;
+ sz = ((unsigned char) ~sz) + 1;
+ sz = sz << 4;
+ }
+ if (mach_is_goni () && board_is_s1())
+ sz = 0;
+ }
+ }
+ /*
+ * bi_dram[1].size contains all DMC1 memory size
+ */
+ gd->bd->bi_dram[1].size = (size + sz) << 20;
+
+ return 0;
+}
+
+/* Used for sleep test */
+static unsigned char saved_val[4][2];
+void board_sleep_init_late(void)
+{
+ /* CODEC_LDO_EN: GPF3[4] */
+ gpio_direction_output(&s5pc110_gpio->gpio_f3, 4, 0);
+ /* CODEC_XTAL_EN: GPH3[2] */
+ gpio_direction_output(&s5pc110_gpio->gpio_h3, 2, 0);
+
+ /* MMC T_FLASH off */
+ gpio_direction_output(&s5pc110_gpio->gpio_mp0_5, 4, 0);
+ /* MHL off */
+ gpio_direction_output(&s5pc110_gpio->gpio_j2, 2, 0);
+ gpio_direction_output(&s5pc110_gpio->gpio_mp0_4, 7, 0);
+ /* MHL_ON for REV02 or higher */
+ gpio_direction_output(&s5pc110_gpio->gpio_j2, 3, 0);
+}
+
+void board_sleep_init(void)
+{
+ unsigned char addr;
+ unsigned char val[2];
+
+ addr = 0xCC >> 1;
+ if (max8998_probe())
+ return;
+
+ if (mach_is_goni()) {
+ /* Set ONOFF1 */
+ i2c_read(addr, MAX8998_REG_ONOFF1, 1, val, 1);
+ saved_val[0][0] = val[0];
+ saved_val[0][1] = val[1];
+ val[0] &= ~((1 << 7) | (1 << 6) | (1 << 4) | (1 << 2) |
+ (1 << 1) | (1 << 0));
+ i2c_write(addr, MAX8998_REG_ONOFF1, 1, val, 1);
+ i2c_read(addr, MAX8998_REG_ONOFF1, 1, val, 1);
+
+ /* Set ONOFF2 */
+ i2c_read(addr, MAX8998_REG_ONOFF2, 1, val, 1);
+ saved_val[1][0] = val[0];
+ saved_val[1][1] = val[1];
+ val[0] &= ~((1 << 7) | (1 << 6) | (1 << 5) | (1 << 3) |
+ (1 << 2) | (1 << 1) | (1 << 0));
+ val[0] |= (1 << 7);
+ i2c_write(addr, MAX8998_REG_ONOFF2, 1, val, 1);
+ i2c_read(addr, MAX8998_REG_ONOFF2, 1, val, 1);
+
+ /* Set ONOFF3 */
+ i2c_read(addr, MAX8998_REG_ONOFF3, 1, val, 1);
+ saved_val[2][0] = val[0];
+ saved_val[2][1] = val[1];
+ val[0] &= ~((1 << 7) | (1 << 6) | (1 << 5) | (1 << 4));
+ i2c_write(addr, MAX8998_REG_ONOFF3, 1, val, 1);
+ i2c_read(addr, MAX8998_REG_ONOFF3, 1, val, 1);
+
+ /* Set ONOFF4 */
+ i2c_read(addr, MAX8998_REG_ONOFF3+1, 1, val, 1);
+ saved_val[3][0] = val[0];
+ saved_val[3][1] = val[1];
+ val[0] &= ~((1 << 6) | (1 << 4));
+ i2c_write(addr, MAX8998_REG_ONOFF3+1, 1, val, 1);
+ i2c_read(addr, MAX8998_REG_ONOFF3+1, 1, val, 1);
+
+ printf("Turned off regulators with Kessler setting."
+ " Preparing to sleep. [%s:%d]\n",
+ __FILE__, __LINE__);
+ } else { /* Default */
+ /* Set ONOFF1 */
+ i2c_read(addr, MAX8998_REG_ONOFF1, 1, val, 1);
+ saved_val[0][0] = val[0];
+ saved_val[0][1] = val[1];
+ val[0] &= ~((1 << 7) | (1 << 6) | (1 << 4) | (1 << 2) |
+ (1 << 1) | (1 << 0));
+ i2c_write(addr, MAX8998_REG_ONOFF1, 1, val, 1);
+ i2c_read(addr, MAX8998_REG_ONOFF1, 1, val, 1);
+
+ /* Set ONOFF2 */
+ i2c_read(addr, MAX8998_REG_ONOFF2, 1, val, 1);
+ saved_val[1][0] = val[0];
+ saved_val[1][1] = val[1];
+ val[0] &= ~((1 << 7) | (1 << 6) | (1 << 5) | (1 << 3) |
+ (1 << 2) | (1 << 1) | (1 << 0));
+ val[0] |= (1 << 7);
+ i2c_write(addr, MAX8998_REG_ONOFF2, 1, val, 1);
+ i2c_read(addr, MAX8998_REG_ONOFF2, 1, val, 1);
+
+ /* Set ONOFF3 */
+ i2c_read(addr, MAX8998_REG_ONOFF3, 1, val, 1);
+ saved_val[2][0] = val[0];
+ saved_val[2][1] = val[1];
+ val[0] &= ~((1 << 7) | (1 << 6) | (1 << 5) | (1 << 4));
+ i2c_write(addr, MAX8998_REG_ONOFF3, 1, val, 1);
+ i2c_read(addr, MAX8998_REG_ONOFF3, 1, val, 1);
+
+ /* Set ONOFF4 */
+ i2c_read(addr, MAX8998_REG_ONOFF3+1, 1, val, 1);
+ saved_val[3][0] = val[0];
+ saved_val[3][1] = val[1];
+ val[0] &= ~((1 << 7) | (1 << 6) | (1 << 4));
+ i2c_write(addr, MAX8998_REG_ONOFF3+1, 1, val, 1);
+ i2c_read(addr, MAX8998_REG_ONOFF3+1, 1, val, 1);
+
+ printf("Turned off regulators with default(Aquila) setting."
+ " Preparing to sleep. [%s:%d]\n",
+ __FILE__, __LINE__);
+ }
+}
+
+void board_sleep_resume(void)
+{
+ unsigned char addr;
+ unsigned char val[2];
+
+ show_hw_revision();
+
+ addr = 0xCC >> 1;
+ if (max8998_probe())
+ return;
+
+ /* Set ONOFF1 */
+ i2c_write(addr, MAX8998_REG_ONOFF1, 1, saved_val[0], 1);
+ i2c_read(addr, MAX8998_REG_ONOFF1, 1, val, 1);
+ /* Set ONOFF2 */
+ i2c_write(addr, MAX8998_REG_ONOFF2, 1, saved_val[1], 1);
+ i2c_read(addr, MAX8998_REG_ONOFF2, 1, val, 1);
+ /* Set ONOFF3 */
+ i2c_write(addr, MAX8998_REG_ONOFF3, 1, saved_val[2], 1);
+ i2c_read(addr, MAX8998_REG_ONOFF3, 1, val, 1);
+ /* Set ONOFF4 */
+ i2c_write(addr, MAX8998_REG_ONOFF3+1, 1, saved_val[3], 1);
+ i2c_read(addr, MAX8998_REG_ONOFF3+1, 1, val, 1);
+ puts("Waked up.\n");
+
+ /* check max17040 */
+ check_battery(0);
+
+ /* check fsa9480 */
+ check_micro_usb(0);
+}
+
+#if defined(CONFIG_USB_GADGET_S3C_UDC_OTG)
+
+static int s5pc1xx_phy_control(int on)
+{
+ static int status;
+
+ if (on && !status) {
+#ifdef CONFIG_CMD_PMIC
+ run_command("pmic ldo 3 on", 0);
+#endif
+ /* S5PC110 */
+ if (board_is_limo_universal() ||
+ board_is_limo_real() ||
+ board_is_media()) {
+ /* check usb path */
+ if (board_is_limo_real() && !hwrevision(6))
+ check_mhl();
+ }
+
+ if (mach_is_tickertape())
+ /* USB_SEL: XM0ADDR_0: MP04[0] output mode */
+ gpio_direction_output(&s5pc110_gpio->gpio_mp0_4, 0, 0);
+
+ /* USB Path to AP */
+ micro_usb_switch(0);
+ status = 1;
+ } else if (!on && status) {
+#ifdef CONFIG_CMD_PMIC
+ run_command("pmic ldo 3 off", 0);
+#endif
+ status = 0;
+ }
+ udelay(10000);
+
+ return 0;
+}
+
+struct s3c_plat_otg_data s5pc110_otg_data = {
+ .phy_control = s5pc1xx_phy_control,
+ .regs_phy = S5PC110_PHY_BASE,
+ .regs_otg = S5PC110_OTG_BASE,
+};
+
+int board_eth_init(bd_t *bis)
+{
+ int res = -1;
+
+ if (cpu_is_s5pc100())
+ return -1;
+
+ s3c_udc_probe(&s5pc110_otg_data);
+ if (usb_eth_initialize(bis) >= 0)
+ res = 0;
+ return res;
+}
+#endif
+
+#ifdef CONFIG_CMD_USBDOWN
+int usb_board_init(void)
+{
+#ifdef CONFIG_CMD_PMIC
+ run_command("pmic ldo 3 on", 0);
+#endif
+
+ if (cpu_is_s5pc100()) {
+#ifdef CONFIG_HARD_I2C
+ uchar val[2] = {0,};
+
+ /* PMIC */
+ if (i2c_read(0x66, 0, 1, val, 2)) {
+ puts("i2c_read error\n");
+ return 1;
+ }
+
+ val[0] |= (1 << 3);
+ val[1] |= (1 << 5);
+
+ if (i2c_write(0x66, 0, 1, val, 2)) {
+ puts("i2c_write error\n");
+ return 1;
+ }
+ i2c_read(0x66, 0, 1, val, 2);
+#endif
+ return 0;
+ }
+
+ /* S5PC110 */
+ if (board_is_limo_universal() ||
+ board_is_limo_real() ||
+ board_is_media()) {
+ /* check usb path */
+ if (board_is_limo_real() && !hwrevision(6))
+ check_mhl();
+ }
+
+ if (mach_is_tickertape())
+ /* USB_SEL: XM0ADDR_0: MP04[0] output mode */
+ gpio_direction_output(&s5pc110_gpio->gpio_mp0_4, 0, 0);
+
+ /* USB Path to AP */
+ micro_usb_switch(0);
+
+ return 0;
+}
+#endif
+
+#ifdef CONFIG_GENERIC_MMC
+int s5p_no_mmc_support(void)
+{
+ if (mach_is_wmg160())
+ return 1;
+ return 0;
+}
+
+int board_mmc_init(bd_t *bis)
+{
+ unsigned int reg;
+ unsigned int clock;
+ struct s5pc110_clock *clk = (struct s5pc110_clock *)S5PC1XX_CLOCK_BASE;
+ int i;
+
+ /* MASSMEMORY_EN: XMSMDATA7: GPJ2[7] output high */
+ if (mach_is_goni())
+ gpio_direction_output(&s5pc110_gpio->gpio_j2, 7, 1);
+
+ if (mach_is_wmg160())
+ return -1;
+
+ /* MMC0 Clock source = SCLKMPLL */
+ reg = readl(&clk->src4);
+ reg &= ~0xf;
+ reg |= 0x6;
+ writel(reg, &clk->src4);
+
+ reg = readl(&clk->div4);
+ reg &= ~0xf;
+
+ /* set div value near 50MHz */
+ clock = get_pll_clk(MPLL) / 1000000;
+ for (i = 0; i < 0xf; i++) {
+ if ((clock / (i + 1)) <= 50) {
+ reg |= i << 0;
+ break;
+ }
+ }
+
+ writel(reg, &clk->div4);
+
+ /*
+ * MMC0 GPIO
+ * GPG0[0] SD_0_CLK
+ * GPG0[1] SD_0_CMD
+ * GPG0[2] SD_0_CDn -> Not used
+ * GPG0[3:6] SD_0_DATA[0:3]
+ */
+ for (i = 0; i < 7; i++) {
+ if (i == 2)
+ continue;
+ /* GPG0[0:6] special function 2 */
+ gpio_cfg_pin(&s5pc110_gpio->gpio_g0, i, 0x2);
+ /* GPG0[0:6] pull disable */
+ gpio_set_pull(&s5pc110_gpio->gpio_g0, i, GPIO_PULL_NONE);
+ /* GPG0[0:6] drv 4x */
+ gpio_set_drv(&s5pc110_gpio->gpio_g0, i, GPIO_DRV_4X);
+ }
+
+ if (mach_is_geminus()) {
+ gpio_direction_output(&s5pc110_gpio->gpio_j2, 7, 1);
+ gpio_set_pull(&s5pc110_gpio->gpio_j2, 7, GPIO_PULL_NONE);
+ }
+
+ return s5pc1xx_mmc_init(0);
+}
+#endif
+
+#ifdef CONFIG_CMD_PMIC
+static int pmic_status(void)
+{
+ unsigned char addr, val[2];
+ int reg, i;
+
+ addr = 0xCC >> 1;
+
+ if (max8998_probe())
+ return -1;
+
+ reg = 0x11;
+ i2c_read(addr, reg, 1, val, 1);
+ for (i = 7; i >= 4; i--)
+ printf("BUCK%d %s\n", 7 - i + 1,
+ val[0] & (1 << i) ? "on" : "off");
+ for (; i >= 0; i--)
+ printf("LDO%d %s\n", 5 - i,
+ val[0] & (1 << i) ? "on" : "off");
+ reg = 0x12;
+ i2c_read(addr, reg, 1, val, 1);
+ for (i = 7; i >= 0; i--)
+ printf("LDO%d %s\n", 7 - i + 6,
+ val[0] & (1 << i) ? "on" : "off");
+ reg = 0x13;
+ i2c_read(addr, reg, 1, val, 1);
+ for (i = 7; i >= 4; i--)
+ printf("LDO%d %s\n", 7 - i + 14,
+ val[0] & (1 << i) ? "on" : "off");
+
+ reg = 0xd;
+ i2c_read(addr, reg, 1, val, 1);
+ for (i = 7; i >= 6; i--)
+ printf("SAFEOUT%d %s\n", 7 - i + 1,
+ val[0] & (1 << i) ? "on" : "off");
+ return 0;
+}
+
+static int pmic_ldo_control(int buck, int ldo, int safeout, int on)
+{
+ unsigned char addr, val[2];
+ unsigned int reg, shift;
+
+ if (ldo) {
+ if (ldo < 2)
+ return -1;
+ if (ldo <= 5) {
+ reg = 0x11;
+ shift = 5 - ldo;
+ } else if (ldo <= 13) {
+ reg = 0x12;
+ shift = 13 - ldo;
+ } else if (ldo <= 17) {
+ reg = 0x13;
+ shift = 17 - ldo + 4;
+ } else
+ return -1;
+ } else if (buck) {
+ if (buck > 4)
+ return -1;
+ reg = 0x11;
+ shift = 4 - buck + 4;
+ } else if (safeout) {
+ if (safeout > 3)
+ return -1;
+ reg = 0xd;
+ shift = 8 - safeout;
+ } else
+ return -1;
+
+ addr = 0xCC >> 1;
+
+ if (max8998_probe())
+ return -1;
+
+ i2c_read(addr, reg, 1, val, 1);
+ if (on)
+ val[0] |= (1 << shift);
+ else
+ val[0] &= ~(1 << shift);
+ i2c_write(addr, reg, 1, val, 1);
+ i2c_read(addr, reg, 1, val, 1);
+
+ if (ldo)
+ printf("ldo %d value 0x%x, %s\n", ldo, val[0],
+ val[0] & (1 << shift) ? "on" : "off");
+ else if (buck)
+ printf("buck %d value 0x%x, %s\n", buck, val[0],
+ val[0] & (1 << shift) ? "on" : "off");
+ else if (safeout)
+ printf("safeout %d value 0x%x, %s\n", safeout, val[0],
+ val[0] & (1 << shift) ? "on" : "off");
+
+ return 0;
+}
+
+static int do_pmic(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+{
+ int buck = 0, ldo = 0, safeout = 0, on = -1;
+
+ switch (argc) {
+ case 2:
+ if (strncmp(argv[1], "status", 6) == 0)
+ return pmic_status();
+ break;
+ case 4:
+ if (strncmp(argv[1], "ldo", 3) == 0)
+ ldo = simple_strtoul(argv[2], NULL, 10);
+ else if (strncmp(argv[1], "buck", 4) == 0)
+ buck = simple_strtoul(argv[2], NULL, 10);
+ else if (strncmp(argv[1], "safeout", 7) == 0)
+ safeout = simple_strtoul(argv[2], NULL, 10);
+ else
+ break;
+
+ if (strncmp(argv[3], "on", 2) == 0)
+ on = 1;
+ else if (strncmp(argv[3], "off", 3) == 0)
+ on = 0;
+ else
+ break;
+
+ return pmic_ldo_control(buck, ldo, safeout, on);
+
+ default:
+ break;
+ }
+
+ cmd_usage(cmdtp);
+ return 1;
+}
+
+U_BOOT_CMD(
+ pmic, CONFIG_SYS_MAXARGS, 1, do_pmic,
+ "PMIC LDO & BUCK control",
+ "status - Display PMIC LDO & BUCK status\n"
+ "pmic ldo num on/off - Turn on/off the LDO\n"
+ "pmic buck num on/off - Turn on/off the BUCK\n"
+ "pmic safeout num on/off - Turn on/off the SAFEOUT\n"
+);
+#endif
+
+#ifdef CONFIG_CMD_DEVICE_POWER
+static int do_microusb(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+{
+ switch (argc) {
+ case 2:
+ if (strncmp(argv[1], "cp", 2) == 0) {
+ micro_usb_switch(1);
+ pmic_ldo_control(0, 0, 2, 1);
+ setenv("usb", "cp");
+ } else if (strncmp(argv[1], "ap", 2) == 0) {
+ micro_usb_switch(0);
+ pmic_ldo_control(0, 0, 2, 0);
+ setenv("usb", "ap");
+ }
+ break;
+ default:
+ cmd_usage(cmdtp);
+ return 1;
+ }
+
+ saveenv();
+
+ printf("USB Path is set to %s\n", getenv("usb"));
+
+ return 0;
+}
+
+U_BOOT_CMD(
+ microusb, CONFIG_SYS_MAXARGS, 1, do_microusb,
+ "Micro USB Switch",
+ "cp - switch to CP\n"
+ "microusb ap - switch to AP\n"
+);
+#endif
const char *ids, *parts;
const char *current_partition;
int ids_changed;
- char tmp_ep[PARTITION_MAXLEN];
+ char tmp_ep[PARTITION_MAXLEN+1];
- DEBUGF("\n---mtdparts_init---\n");
+ debug("\n---mtdparts_init---\n");
if (!initialized) {
INIT_LIST_HEAD(&mtdids);
INIT_LIST_HEAD(&devices);
return 0;
}
- int do_onenand(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
+ static int do_onenand_info(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
+ {
+ printf("%s\n", mtd->name);
+ return 0;
+ }
+
+ static int do_onenand_bad(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
+ {
+ ulong ofs;
+
+ mtd = &onenand_mtd;
+ /* Currently only one OneNAND device is supported */
+ printf("\nDevice %d bad blocks:\n", 0);
+ for (ofs = 0; ofs < mtd->size; ofs += mtd->erasesize) {
+ if (mtd->block_isbad(mtd, ofs))
+ printf(" %08x\n", (u32)ofs);
+ }
+
+ return 0;
+ }
+
+ static int do_onenand_read(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
{
- struct onenand_chip *this;
- int blocksize;
+ char *s;
+ int oob = 0;
ulong addr, ofs;
- ssize_t len, retlen = 0;
- size_t len;
++ ssize_t len;
int ret = 0;
- char *cmd, *s;
- size_t retlen = 0;
++ ssize_t retlen = 0;
- mtd = &onenand_mtd;
- this = mtd->priv;
- blocksize = (1 << this->erase_shift);
+ if (argc < 3)
+ {
+ cmd_usage(cmdtp);
+ return 1;
+ }
- cmd = argv[1];
+ s = strchr(argv[0], '.');
+ if ((s != NULL) && (!strcmp(s, ".oob")))
+ oob = 1;
- switch (argc) {
- case 0:
- case 1:
- goto usage;
+ addr = (ulong)simple_strtoul(argv[1], NULL, 16);
- case 2:
- if (strcmp(cmd, "info") == 0) {
- printf("%s\n", mtd->name);
- return 0;
- }
+ printf("\nOneNAND read: ");
+ if (arg_off_size(argc - 2, argv + 2, &ofs, &len) != 0)
+ return 1;
- if (strcmp(cmd, "bad") == 0) {
- /* Currently only one OneNAND device is supported */
- printf("\nDevice %d bad blocks:\n", 0);
- for (ofs = 0; ofs < mtd->size; ofs += mtd->erasesize) {
- if (mtd->block_isbad(mtd, ofs))
- printf(" %08x\n", (u32)ofs);
- }
+ ret = onenand_block_read(ofs, len, &retlen, (u8 *)addr, oob);
- return 0;
- }
+ printf(" %d bytes read: %s\n", retlen, ret ? "ERROR" : "OK");
- default:
- /* At least 4 args */
+ return ret == 0 ? 0 : 1;
+ }
- /*
- * Syntax is:
- * 0 1 2 3 4
- * onenand erase [force] [off size]
- */
- if ((strcmp(cmd, "erase") == 0) || (strcmp(cmd, "test") == 0)) {
- int force = argc > 2 && !strcmp("force", argv[2]);
- int o = force ? 3 : 2;
- int erase;
+ static int do_onenand_write(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
+ {
+ ulong addr, ofs;
- size_t len;
++ ssize_t len;
+ int ret = 0;
- size_t retlen = 0;
++ ssize_t retlen = 0;
- erase = strcmp(cmd, "erase") == 0; /* 1 = erase, 0 = test */
- printf("\nOneNAND %s %s: ", erase ? "erase" : "test",
- force ? "force" : "");
+ if (argc < 3)
+ {
+ cmd_usage(cmdtp);
+ return 1;
+ }
- /* skip first two or three arguments, look for offset and size */
- if (arg_off_size(argc - o, argv + o, &ofs, &len) != 0)
- return 1;
+ addr = (ulong)simple_strtoul(argv[1], NULL, 16);
- if (erase)
- ret = onenand_block_erase(ofs, len, force);
- else
- ret = onenand_block_test(ofs, len);
+ printf("\nOneNAND write: ");
+ if (arg_off_size(argc - 2, argv + 2, &ofs, &len) != 0)
+ return 1;
- printf("%s\n", ret ? "ERROR" : "OK");
+ ret = onenand_block_write(ofs, len, &retlen, (u8 *)addr);
+
+ printf(" %d bytes written: %s\n", retlen, ret ? "ERROR" : "OK");
+
+ return ret == 0 ? 0 : 1;
+ }
- return ret == 0 ? 0 : 1;
+ static int do_onenand_erase(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
+ {
+ ulong ofs;
+ int ret = 0;
- size_t len;
++ ssize_t len;
+ int force;
+
+ /*
+ * Syntax is:
+ * 0 1 2 3 4
+ * onenand erase [force] [off size]
+ */
+ argc--;
+ argv++;
+ if (argc)
+ {
+ if (!strcmp("force", argv[0]))
+ {
+ force = 1;
+ argc--;
+ argv++;
}
+ }
+ printf("\nOneNAND erase: ");
- if (strncmp(cmd, "read", 4) == 0 || strncmp(cmd, "write", 5) == 0) {
- int read;
- int oob = 0;
+ /* skip first two or three arguments, look for offset and size */
+ if (arg_off_size(argc, argv, &ofs, &len) != 0)
+ return 1;
- if (argc < 4)
- goto usage;
+ ret = onenand_block_erase(ofs, len, force);
- addr = (ulong)simple_strtoul(argv[2], NULL, 16);
+ printf("%s\n", ret ? "ERROR" : "OK");
- read = strncmp(cmd, "read", 4) == 0; /* 1 = read, 0 = write */
- printf("\nOneNAND %s: ", read ? "read" : "write");
- if (arg_off_size(argc - 3, argv + 3, &ofs, &len) != 0)
- return 1;
+ return ret == 0 ? 0 : 1;
+ }
- s = strchr(cmd, '.');
- if ((s != NULL) && (!strcmp(s, ".oob")))
- oob = 1;
+ static int do_onenand_test(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
+ {
+ ulong ofs;
+ int ret = 0;
- size_t len;
++ ssize_t len;
- if (read) {
- ret = onenand_block_read(ofs, len, &retlen,
- (u8 *)addr, oob);
- } else {
- ret = onenand_block_write(ofs, len, &retlen,
- (u8 *)addr);
- }
+ /*
+ * Syntax is:
+ * 0 1 2 3 4
+ * onenand test [force] [off size]
+ */
- printf(" %d bytes %s: %s\n", retlen,
- read ? "read" : "written", ret ? "ERROR" : "OK");
+ printf("\nOneNAND test: ");
- return ret == 0 ? 0 : 1;
- }
+ /* skip first two or three arguments, look for offset and size */
+ if (arg_off_size(argc - 1, argv + 1, &ofs, &len) != 0)
+ return 1;
- if (strcmp(cmd, "markbad") == 0) {
- argc -= 2;
- argv += 2;
-
- if (argc <= 0)
- goto usage;
-
- while (argc > 0) {
- addr = simple_strtoul(*argv, NULL, 16);
-
- if (mtd->block_markbad(mtd, addr)) {
- printf("block 0x%08lx NOT marked "
- "as bad! ERROR %d\n",
- addr, ret);
- ret = 1;
- } else {
- printf("block 0x%08lx successfully "
- "marked as bad\n",
- addr);
- }
- --argc;
- ++argv;
- }
- return ret;
- }
+ ret = onenand_block_test(ofs, len);
- if (strncmp(cmd, "dump", 4) == 0) {
- if (argc < 3)
- goto usage;
+ printf("%s\n", ret ? "ERROR" : "OK");
- s = strchr(cmd, '.');
- ofs = (int)simple_strtoul(argv[2], NULL, 16);
+ return ret == 0 ? 0 : 1;
+ }
+
+ static int do_onenand_dump(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
+ {
+ ulong ofs;
+ int ret = 0;
+ char *s;
- if (s != NULL && strcmp(s, ".oob") == 0)
- ret = onenand_dump(mtd, ofs, 1);
- else
- ret = onenand_dump(mtd, ofs, 0);
+ if (argc < 2)
+ {
+ cmd_usage(cmdtp);
+ return 1;
+ }
- return ret == 0 ? 1 : 0;
- }
+ s = strchr(argv[0], '.');
+ ofs = (int)simple_strtoul(argv[1], NULL, 16);
- if (strncmp(cmd, "lock", 4) == 0) {
- printf("OneNAND lock: ");
- if (argc < 4) {
- ofs = 0x0;
- len = mtd->size;
- } else {
- if (arg_off_size(argc-2, argv+2, &ofs, &len))
- return 1;
- }
+ if (s != NULL && strcmp(s, ".oob") == 0)
+ ret = onenand_dump(mtd, ofs, 1);
+ else
+ ret = onenand_dump(mtd, ofs, 0);
- ret = onenand_block_islock(ofs, len);
+ return ret == 0 ? 1 : 0;
+ }
- return ret;
+ static int do_onenand_markbad(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
+ {
+ int ret = 0;
+ ulong addr;
+
+ argc -= 2;
+ argv += 2;
+
+ if (argc <= 0)
+ {
+ cmd_usage(cmdtp);
+ return 1;
+ }
+
+ while (argc > 0) {
+ addr = simple_strtoul(*argv, NULL, 16);
+
+ if (mtd->block_markbad(mtd, addr)) {
+ printf("block 0x%08lx NOT marked "
+ "as bad! ERROR %d\n",
+ addr, ret);
+ ret = 1;
+ } else {
+ printf("block 0x%08lx successfully "
+ "marked as bad\n",
+ addr);
}
+ --argc;
+ ++argv;
+ }
+ return ret;
+ }
- break;
++static int do_onenand_lock(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
++{
++ ulong start;
++ ssize_t size;
++ struct onenand_chip *this = mtd->priv;
++ loff_t ofs;
++ int status;
++ int status_mask = ONENAND_WP_LS|ONENAND_WP_LTS;
++
++ if (argc < 4) {
++ start = 0x0;
++ size = mtd->size;
++ } else {
++ if (arg_off_size(argc - 2, argv + 2, &start, &size))
++ return 1;
++ }
++
++ for (ofs = start; ofs < (start + size); ofs += mtd->erasesize) {
++ if (this->block_islock != NULL)
++ status = this->block_islock(mtd, ofs);
++ else
++ status = 0;
++
++ if (status & status_mask)
++ return (status & status_mask);
+ }
+
+ return 0;
++}
+
- usage:
- cmd_usage(cmdtp);
- return 1;
+ static cmd_tbl_t cmd_onenand_sub[] = {
+ U_BOOT_CMD_MKENT(info, 1, 0, do_onenand_info, "", ""),
+ U_BOOT_CMD_MKENT(bad, 1, 0, do_onenand_bad, "", ""),
+ U_BOOT_CMD_MKENT(read, 4, 0, do_onenand_read, "", ""),
+ U_BOOT_CMD_MKENT(write, 4, 0, do_onenand_write, "", ""),
+ U_BOOT_CMD_MKENT(erase, 3, 0, do_onenand_erase, "", ""),
+ U_BOOT_CMD_MKENT(test, 3, 0, do_onenand_test, "", ""),
+ U_BOOT_CMD_MKENT(dump, 2, 0, do_onenand_dump, "", ""),
+ U_BOOT_CMD_MKENT(markbad, CONFIG_SYS_MAXARGS, 0, do_onenand_markbad, "", ""),
++ U_BOOT_CMD_MKENT(lock, 3, 0, do_onenand_lock, "", ""),
+ };
+
-static int do_onenand(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
++int do_onenand(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
+ {
+ cmd_tbl_t *c;
+
+ mtd = &onenand_mtd;
+
+ /* Strip off leading 'onenand' command argument */
+ argc--;
+ argv++;
+
+ c = find_cmd_tbl(argv[0], &cmd_onenand_sub[0], ARRAY_SIZE(cmd_onenand_sub));
+
+ if (c) {
+ return c->cmd(cmdtp, flag, argc, argv);
+ } else {
+ cmd_usage(cmdtp);
+ return 1;
+ }
}
U_BOOT_CMD(
--- /dev/null
+/*
+ * USB Downloader for SAMSUNG Platform
+ *
+ * Copyright (C) 2007-2008 Samsung Electronics
+ * Minkyu Kang <mk7.kang@samsung.com>
+ *
+ */
+
+#include <common.h>
+#include <usbd.h>
+#include <asm/errno.h>
+#include <malloc.h>
+
+/* version of USB Downloader Application */
+#define APP_VERSION "1.5.3"
+
+#define OPS_READ 0
+#define OPS_WRITE 1
+
+#ifdef CONFIG_CMD_MTDPARTS
+#include <jffs2/load_kernel.h>
+static struct part_info *parts[16];
+#endif
+
+static const char pszMe[] = "usbd: ";
+
+static struct usbd_ops usbd_ops;
+
+static unsigned int part_id;
+static unsigned int write_part = 0;
+static unsigned long fs_offset = 0x0;
+
+#ifdef CONFIG_USE_YAFFS
+static unsigned int yaffs_len = 0;
+static unsigned char yaffs_data[2112];
+#define YAFFS_PAGE 2112
+#endif
+
+#define NAND_PAGE_SIZE 2048
+
+static unsigned long down_ram_addr;
+
+static int down_mode;
+
+/* cpu/${CPU} dependent */
+extern void do_reset(void);
+
+/* common commands */
+extern int do_bootm(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
+extern int do_run(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]);
+
+int mtdparts_init(void);
+int find_dev_and_part(const char*, struct mtd_device**, u8*, struct part_info**);
+
+/* common/cmd_jffs2.c */
+extern struct list_head devices;
+
+static u8 count_mtdparts(void)
+{
+ struct list_head *dentry, *pentry;
+ struct mtd_device *dev;
+ u8 part_num = 0;
+
+ list_for_each(dentry, &devices) {
+ dev = list_entry(dentry, struct mtd_device, link);
+
+ /* list partitions for given device */
+ list_for_each(pentry, &dev->parts)
+ part_num++;
+ }
+
+ return part_num;
+}
+
+#ifdef CONFIG_CMD_UBI
+static int check_ubi_mode(void)
+{
+ char *env_ubifs;
+ int ubi_mode;
+
+ env_ubifs = getenv("ubi");
+ ubi_mode = !strcmp(env_ubifs, "enabled");
+
+ return ubi_mode;
+}
+#else
+#define check_ubi_mode() 0
+#endif
+
+#ifdef CONFIG_MTD_PARTITIONS
+static int get_part_info(void)
+{
+ struct mtd_device *dev;
+ u8 out_partnum;
+ char part_name[12];
+ char nand_name[12];
+ int i;
+ int part_num;
+ int ubi_mode = 0;
+
+#if defined(CONFIG_CMD_NAND)
+ sprintf(nand_name, "nand0");
+#elif defined(CONFIG_CMD_ONENAND)
+ sprintf(nand_name, "onenand0");
+#else
+ printf("Configure your NAND sub-system\n");
+ return 0;
+#endif
+
+ if (mtdparts_init())
+ return 0;
+
+ ubi_mode = check_ubi_mode();
+
+ part_num = count_mtdparts();
+ for (i = 0; i < part_num; i++) {
+ sprintf(part_name, "%s,%d", nand_name, i);
+
+ if (find_dev_and_part(part_name, &dev, &out_partnum, &parts[i]))
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int get_part_id(char *name)
+{
+ int nparts = count_mtdparts();
+ int i;
+
+ for (i = 0; i < nparts; i++) {
+ if (strcmp(parts[i]->name, name) == 0)
+ return i;
+ }
+
+ printf("Error: Unknown partition -> %s\n", name);
+ return -1;
+}
+#else
+static int get_part_info(void)
+{
+ printf("Error: Can't get patition information\n");
+ return -EINVAL;
+}
+
+static int get_part_id(char *name)
+{
+ return 0;
+}
+#endif
+
+static void boot_cmd(char *addr)
+{
+ char *argv[] = { "bootm", addr };
+ do_bootm(NULL, 0, 2, argv);
+}
+
+static void run_cmd(char *cmd)
+{
+ char *argv[] = { "run", cmd };
+ do_run(NULL, 0, 2, argv);
+}
+
+#if defined(CONFIG_CMD_NAND)
+extern int do_nand(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
+#elif defined(CONFIG_CMD_ONENAND)
+extern int do_onenand(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
+#endif
+
+/* NAND erase and write using nand command */
+static int nand_cmd(int type, char *p1, char *p2, char *p3)
+{
+ int ret = 1;
+ char nand_name[12];
+ int (*nand_func) (cmd_tbl_t *, int, int, char **);
+
+#if defined(CONFIG_CMD_NAND)
+ sprintf(nand_name, "nand");
+ nand_func = do_nand;
+#elif defined(CONFIG_CMD_ONENAND)
+ sprintf(nand_name, "onenand");
+ nand_func = do_onenand;
+#else
+ printf("Configure your NAND sub-system\n");
+ return 0;
+#endif
+
+ if (type == 0) {
+ char *argv[] = {nand_name, "erase", p1, p2};
+ printf("%s %s %s %s\n", argv[0], argv[1], argv[2], argv[3]);
+ ret = nand_func(NULL, 0, 4, argv);
+ } else if (type == 1) {
+ char *argv[] = {nand_name, "write", p1, p2, p3};
+ printf("%s %s %s %s %s\n", argv[0], argv[1], argv[2],
+ argv[3], argv[4]);
+ ret = nand_func(NULL, 0, 5, argv);
+ } else if (type == 2) {
+ char *argv[] = {nand_name, "write.yaffs", p1, p2, p3};
+ printf("%s %s %s %s %s\n", argv[0], argv[1], argv[2],
+ argv[3], argv[4]);
+ ret = nand_func(NULL, 0, 5, argv);
+ } else if (type == 3) {
+ char *argv[] = {nand_name, "lock", p1, p2};
+ printf("%s %s %s %s\n", argv[0], argv[1], argv[2], argv[3]);
+ ret = nand_func(NULL, 0, 4, argv);
+ }
+
+ if (ret)
+ printf("Error: NAND Command\n");
+
+ return ret;
+}
+
+#ifdef CONFIG_CMD_UBI
+int do_ubi(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
+
+int ubi_cmd(int part, char *p1, char *p2, char *p3)
+{
+ int ret = 1;
+
+ if (part == RAMDISK_PART_ID) {
+ char *argv[] = {"ubi", "write", p1, "rootfs.cramfs", p2, p3};
+ printf("%s %s %s %s %s %s\n", argv[0], argv[1], argv[2],
+ argv[3], argv[4], argv[5]);
+ ret = do_ubi(NULL, 0, 6, argv);
+ } else if (part == FILESYSTEM_PART_ID) {
+ char *argv[] = {"ubi", "write", p1, "factoryfs.cramfs", p2, p3};
+ printf("%s %s %s %s %s %s\n", argv[0], argv[1], argv[2],
+ argv[3], argv[4], argv[5]);
+ ret = do_ubi(NULL, 0, 6, argv);
+ } else if (part == FILESYSTEM2_PART_ID) {
+ char *argv[] = {"ubi", "write", p1, "datafs.ubifs", p2, p3};
+ printf("%s %s %s %s %s %s\n", argv[0], argv[1], argv[2],
+ argv[3], argv[4], argv[5]);
+ ret = do_ubi(NULL, 0, 6, argv);
+ }
+
+ return ret;
+}
+#endif
+
+#ifdef CONFIG_CMD_MMC
+#include <fat.h>
+
+extern int do_mmcops(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
+
+static int mmc_cmd(int ops, char *p1, char *p2, char *p3)
+{
+ int ret;
+
+ if (ops) {
+ char *argv[] = {"mmc", "write", "0", p1, p2, p3};
+ ret = do_mmcops(NULL, 0, 6, argv);
+ } else {
+ char *argv[] = {"mmc", "read", "0", p1, p2, p3};
+ ret = do_mmcops(NULL, 0, 6, argv);
+ }
+
+ return ret;
+}
+
+static unsigned int cur_blk_offset;
+static unsigned int cur_part_size;
+static unsigned int cur_partition;
+
+static unsigned int mmc_parts;
+static unsigned int mmc_part_write;
+
+struct partition_info {
+ u32 size;
+ u32 checksum;
+ u32 res;
+} __attribute__((packed));
+
+struct partition_header {
+ u8 fat32head[16]; /* RFSHEAD identifier */
+ struct partition_info partition[4];
+ u8 res[448]; /* reserved */
+} __attribute__((packed));
+
+struct partition_table {
+ u8 boot_flag;
+ u8 chs_begin[3];
+ u8 type_code;
+ u8 chs_end[3];
+ u32 lba_begin;
+ u32 num_sectors;
+} __attribute__((packed));
+
+struct mbr_table {
+ u8 boot_code[446];
+ struct partition_table partition[4];
+ u16 signature;
+} __attribute__((packed));
+
+#define MBR_OFFSET 0x10
+
+struct partition_header part_info;
+struct mbr_table mbr_info;
+
+static int write_mmc_partition(struct usbd_ops *usbd, u32 *ram_addr, u32 len)
+{
+ unsigned int blocks;
+ char offset[12], length[12], ramaddr[12];
+ int i;
+ int loop;
+ u32 cnt;
+ int ret;
+
+ if (cur_part_size > len) {
+ blocks = len / usbd->mmc_blk;
+ ret = -1;
+ } else {
+ blocks = cur_part_size / usbd->mmc_blk;
+ ret = len - cur_part_size;
+ }
+
+ if (len % usbd->mmc_blk)
+ blocks++;
+
+ loop = blocks / usbd->mmc_max;
+ if (blocks % usbd->mmc_max)
+ loop++;
+
+ for (i = 0; i < loop; i++) {
+ if (i == 0) {
+ cnt = blocks % usbd->mmc_max;
+ if (cnt == 0)
+ cnt = usbd->mmc_max;
+ } else {
+ cnt = usbd->mmc_max;
+ }
+
+ sprintf(length, "%x", cnt);
+ sprintf(offset, "%x", cur_blk_offset);
+ sprintf(ramaddr, "0x%x", *ram_addr);
+ mmc_cmd(OPS_WRITE, ramaddr, offset, length);
+
+ cur_blk_offset += cnt;
+
+ *ram_addr += (cnt * usbd->mmc_blk);
+ }
+
+ return ret;
+}
+
+static int write_file_mmc(struct usbd_ops *usbd, char *ramaddr, u32 len,
+ char *offset, char *length)
+{
+ u32 ram_addr;
+ int i;
+ int ret;
+
+ if (!usbd->mmc_total) {
+ printf("MMC is not supported!\n");
+ return 0;
+ }
+
+ ram_addr = (u32)down_ram_addr;
+
+ if (cur_blk_offset == 0) {
+ boot_sector *bs;
+ struct mbr_table *mbr;
+
+ memcpy(&part_info, (void *)ram_addr,
+ sizeof(struct partition_header));
+
+ ram_addr += sizeof(struct partition_header);
+ len -= sizeof(struct partition_header);
+ mbr = (struct mbr_table*)ram_addr;
+
+ /* modify sectors of p1 */
+ mbr->partition[0].num_sectors = usbd->mmc_total -
+ (MBR_OFFSET +
+ mbr->partition[1].num_sectors +
+ mbr->partition[2].num_sectors +
+ mbr->partition[3].num_sectors);
+
+ mmc_parts++;
+
+ /* modify lba_begin of p2 and p3 and p4 */
+ for (i = 1; i < 4; i++) {
+ if (part_info.partition[i].size == 0)
+ break;
+
+ mmc_parts++;
+ mbr->partition[i].lba_begin =
+ mbr->partition[i - 1].lba_begin +
+ mbr->partition[i - 1].num_sectors;
+ }
+
+ /* copy MBR */
+ memcpy(&mbr_info, mbr, sizeof(struct mbr_table));
+
+ printf("Total Size: 0x%08x #parts %d\n",
+ (unsigned int)usbd->mmc_total, mmc_parts);
+ for (i = 0; i < mmc_parts; i++) {
+ printf("p%d\t0x%08x\t0x%08x\n", i + 1,
+ mbr_info.partition[i].lba_begin,
+ mbr_info.partition[i].num_sectors);
+ }
+
+ /* write MBR */
+ sprintf(length, "%x", MBR_OFFSET);
+ sprintf(offset, "%x", 0);
+ sprintf(ramaddr, "0x%x", (u32)ram_addr);
+ ret = mmc_cmd(OPS_WRITE, ramaddr, offset, length);
+
+ ram_addr += (MBR_OFFSET * usbd->mmc_blk);
+ len -= (MBR_OFFSET * usbd->mmc_blk);
+
+ cur_blk_offset = MBR_OFFSET;
+ cur_partition = 0;
+ cur_part_size = part_info.partition[0].size;
+
+ /* modify p1's total sector */
+ bs = (boot_sector *)ram_addr;
+ bs->total_sect = mbr_info.partition[0].num_sectors;
+
+ printf("\nWrite Partition %d.. %d blocks\n",
+ cur_partition + 1,
+ part_info.partition[cur_partition].size /
+ (int)usbd->mmc_blk);
+ }
+
+ for (i = cur_partition; i < mmc_parts; i++) {
+ ret = write_mmc_partition(usbd, &ram_addr, len);
+
+ if (ret < 0) {
+ cur_part_size -= len;
+ break;
+ } else {
+ cur_partition++;
+ cur_part_size =
+ part_info.partition[cur_partition].size;
+ cur_blk_offset =
+ mbr_info.partition[cur_partition].lba_begin;
+
+ if (ret == 0)
+ break;
+ else
+ len = ret;
+
+ printf("\nWrite Partition %d.. %d blocks\n",
+ cur_partition + 1,
+ part_info.partition[cur_partition].size /
+ (int)usbd->mmc_blk);
+ }
+ }
+
+ return 0;
+}
+
+static int write_file_mmc_part(struct usbd_ops *usbd, char *ramaddr, u32 len,
+ char *offset, char *length)
+{
+ u32 ram_addr;
+ int ret;
+ int i;
+
+ ram_addr = (u32)down_ram_addr;
+
+ if (cur_blk_offset == 0) {
+ /* read MBR */
+ sprintf(length, "%x", MBR_OFFSET);
+ sprintf(offset, "%x", 0);
+ sprintf(ramaddr, "0x%x", (u32)&mbr_info);
+ ret = mmc_cmd(OPS_READ, ramaddr, offset, length);
+
+ for (i = 0; i < 4; i++) {
+ printf("p%d\t0x%08x\t0x%08x\n", i + 1,
+ mbr_info.partition[i].lba_begin,
+ mbr_info.partition[i].num_sectors);
+ }
+
+ cur_blk_offset = (unsigned int)
+ mbr_info.partition[mmc_part_write - 1].lba_begin;
+ cur_partition = mmc_part_write - 1;
+ cur_part_size = (unsigned int)len;
+
+ if (mmc_part_write == 1) {
+ ram_addr += sizeof(boot_sector);
+ cur_blk_offset += sizeof(boot_sector) / usbd->mmc_blk;
+ len -= sizeof(boot_sector);
+ }
+ }
+
+ printf("\nWrite Partition %d.. %d blocks\n",
+ cur_partition + 1,
+ len / (int)usbd->mmc_blk);
+
+ write_mmc_partition(usbd, &ram_addr, len);
+
+ return 0;
+}
+#endif
+
+static int write_file_system(char *ramaddr, ulong len, char *offset,
+ char *length, int part_num, int ubi_update)
+{
+#ifdef CONFIG_USE_YAFFS
+ int actual_len = 0;
+ int yaffs_write = 0;
+#endif
+ int ret = 0;
+
+#ifdef CONFIG_CMD_UBI
+ /* UBI Update */
+ if (ubi_update) {
+ sprintf(length, "0x%x", (uint)len);
+ ret = ubi_cmd(part_id, ramaddr, length, "cont");
+ return ret;
+ }
+#endif
+
+ /* Erase entire partition at the first writing */
+ if (write_part == 0 && ubi_update == 0) {
+ sprintf(offset, "0x%x", (uint)parts[part_num]->offset);
+ sprintf(length, "0x%x", (uint)parts[part_num]->size);
+ nand_cmd(0, offset, length, NULL);
+ }
+
+#ifdef CONFIG_USE_YAFFS
+ /* if using yaffs, wirte size must be 2112*X
+ * so, must have to realloc, and writing */
+ if (!strcmp("yaffs", getenv(parts[part_num]->name))) {
+ yaffs_write = 1;
+
+ memcpy((void *)down_ram_addr, yaffs_data, yaffs_len);
+
+ actual_len = len + yaffs_len;
+ yaffs_len = actual_len % YAFFS_PAGE;
+ len = actual_len - yaffs_len;
+
+ memset(yaffs_data, 0x00, YAFFS_PAGE);
+ memcpy(yaffs_data, (char *)down_ram_addr + len, yaffs_len);
+ }
+#endif
+
+ sprintf(offset, "0x%x", (uint)(parts[part_num]->offset + fs_offset));
+ sprintf(length, "0x%x", (uint)len);
+
+#ifdef CONFIG_USE_YAFFS
+ if (yaffs_write)
+ ret = nand_cmd(2, ramaddr, offset, length);
+ else
+ ret = nand_cmd(1, ramaddr, offset, length);
+
+ if (!strcmp("yaffs", getenv(parts[part_num]->name)))
+ fs_offset += len / YAFFS_PAGE * NAND_PAGE_SIZE;
+ else
+ fs_offset += len;
+
+#else
+ fs_offset += len;
+ ret = nand_cmd(1, ramaddr, offset, length);
+#endif
+
+ return ret;
+}
+
+/* Parsing received data packet and Process data */
+static int process_data(struct usbd_ops *usbd)
+{
+ ulong cmd = 0, arg = 0, ofs = 0, len = 0, flag = 0;
+ char offset[12], length[12], ramaddr[12];
+ int recvlen = 0;
+ unsigned int blocks = 0;
+ int ret = 0;
+ int ubi_update = 0;
+ int ubi_mode = 0;
+ int img_type;
+
+ sprintf(ramaddr, "0x%x", (uint) down_ram_addr);
+
+ /* Parse command */
+ cmd = *((ulong *) usbd->rx_data + 0);
+ arg = *((ulong *) usbd->rx_data + 1);
+ len = *((ulong *) usbd->rx_data + 2);
+ flag = *((ulong *) usbd->rx_data + 3);
+
+ /* Reset tx buffer */
+ memset(usbd->tx_data, 0, sizeof(usbd->tx_data));
+
+ ubi_mode = check_ubi_mode();
+
+ switch (cmd) {
+ case COMMAND_DOWNLOAD_IMAGE:
+ printf("\nCOMMAND_DOWNLOAD_IMAGE\n");
+
+#ifdef CONFIG_USE_YAFFS
+ usbd->recv_setup((char *)down_ram_addr + yaffs_len, (int)len);
+ printf("Download to 0x%08x, %d bytes\n",
+ (uint)down_ram_addr + yaffs_len, (int)len);
+#else
+ usbd->recv_setup((char *)down_ram_addr, (int)len);
+ printf("Download to 0x%08x, %d bytes\n",
+ (uint)down_ram_addr, (int)len);
+#endif
+ /* response */
+ usbd->send_data(usbd->tx_data, usbd->tx_len);
+
+ /* Receive image by using dma */
+ recvlen = usbd->recv_data();
+ if (recvlen < len) {
+ printf("Error: wrong image size -> %d/%d\n",
+ (int)recvlen, (int)len);
+
+ /* Retry this commad */
+ *((ulong *) usbd->tx_data) = STATUS_RETRY;
+ } else
+ *((ulong *) usbd->tx_data) = STATUS_DONE;
+
+ usbd->send_data(usbd->tx_data, usbd->tx_len);
+ return 1;
+
+ /* Report partition info */
+ case COMMAND_PARTITION_SYNC:
+ part_id = arg;
+
+#ifdef CONFIG_CMD_UBI
+ if (ubi_mode) {
+ if (part_id == RAMDISK_PART_ID ||
+ part_id == FILESYSTEM_PART_ID ||
+ part_id == FILESYSTEM2_PART_ID) {
+ /* change to yaffs style */
+ get_part_info();
+ }
+ } else {
+ if (part_id == FILESYSTEM3_PART_ID) {
+ /* change ubi style */
+ get_part_info();
+ }
+ }
+#endif
+
+ if (part_id == FILESYSTEM3_PART_ID)
+ part_id = get_part_id("UBI");
+ else if (part_id == MODEM_PART_ID)
+ part_id = get_part_id("modem");
+ else if (part_id == KERNEL_PART_ID)
+ part_id = get_part_id("kernel");
+#ifdef CONFIG_MIRAGE
+ if (part_id)
+ part_id--;
+#endif
+ printf("COMMAND_PARTITION_SYNC - Part%d\n", part_id);
+
+ blocks = parts[part_id]->size / 1024 / 128;
+ printf("COMMAND_PARTITION_SYNC - Part%d, %d blocks\n",
+ part_id, blocks);
+
+ *((ulong *) usbd->tx_data) = blocks;
+ usbd->send_data(usbd->tx_data, usbd->tx_len);
+ return 1;
+
+ case COMMAND_WRITE_PART_0:
+ /* Do nothing */
+ printf("COMMAND_WRITE_PART_0\n");
+ return 1;
+
+ case COMMAND_WRITE_PART_1:
+ printf("COMMAND_WRITE_PART_BOOT\n");
+ part_id = get_part_id("bootloader");
+ img_type = IMG_BOOT;
+ break;
+
+ case COMMAND_WRITE_PART_2:
+ case COMMAND_ERASE_PARAMETER:
+ printf("COMMAND_PARAMETER - not support!\n");
+ break;
+
+ case COMMAND_WRITE_PART_3:
+ printf("COMMAND_WRITE_KERNEL\n");
+ part_id = get_part_id("kernel");
+ img_type = IMG_KERNEL;
+ break;
+
+ case COMMAND_WRITE_PART_4:
+ printf("COMMAND_WRITE_ROOTFS\n");
+ part_id = get_part_id("Root");
+ img_type = IMG_FILESYSTEM;
+ ubi_update = arg;
+ break;
+
+ case COMMAND_WRITE_PART_5:
+ printf("COMMAND_WRITE_FACTORYFS\n");
+ part_id = get_part_id("Fact");
+ img_type = IMG_FILESYSTEM;
+ ubi_update = arg;
+ break;
+
+ case COMMAND_WRITE_PART_6:
+ printf("COMMAND_WRITE_DATAFS\n");
+ part_id = get_part_id("Data");
+ img_type = IMG_FILESYSTEM;
+ ubi_update = arg;
+ break;
+
+ case COMMAND_WRITE_PART_7:
+ printf("COMMAND_WRITE_UBI\n");
+ part_id = get_part_id("UBI");
+ img_type = IMG_FILESYSTEM;
+ ubi_update = 0;
+ /* someday, it will be deleted */
+ get_part_info();
+ break;
+
+ case COMMAND_WRITE_PART_8:
+ printf("COMMAND_WRITE_MODEM\n");
+ part_id = get_part_id("modem");
+ img_type = IMG_MODEM;
+ break;
+
++#ifdef CONFIG_CMD_MMC
+ case COMMAND_WRITE_PART_9:
+ printf("COMMAND_WRITE_MMC\n");
+ img_type = IMG_MMC;
+ mmc_part_write = arg;
+ break;
++#endif
+
+ case COMMAND_WRITE_UBI_INFO:
+ printf("COMMAND_WRITE_UBI_INFO\n");
+
+ if (ubi_mode) {
+#ifdef CONFIG_CMD_UBI
+ part_id = arg-1;
+ sprintf(length, "0x%x", (uint)len);
+ ret = ubi_cmd(part_id, ramaddr, length, "begin");
+ } else {
+#endif
+ printf("Error: Not UBI mode\n");
+ ret = 1;
+ }
+
+ *((ulong *) usbd->tx_data) = ret;
+ /* Write image success -> Report status */
+ usbd->send_data(usbd->tx_data, usbd->tx_len);
+
+ return !ret;
+ /* Download complete -> reset */
+ case COMMAND_RESET_PDA:
+ printf("\nDownload finished and Auto reset!\nWait........\n");
+
+ /* Stop USB */
+ usbd->usb_stop();
+
+ if (usbd->cpu_reset)
+ usbd->cpu_reset();
+ else
+ do_reset();
+
+ return 0;
+
+ /* Error */
+ case COMMAND_RESET_USB:
+ printf("\nError is occured!(maybe previous step)->\
+ Turn off and restart!\n");
+
+ /* Stop USB */
+ usbd->usb_stop();
+ return 0;
+
+ case COMMAND_RAM_BOOT:
+ usbd->usb_stop();
+ boot_cmd(ramaddr);
+ return 0;
+
+ case COMMAND_RAMDISK_MODE:
+ printf("COMMAND_RAMDISK_MODE\n");
+#ifdef CONFIG_RAMDISK_ADDR
+ if (arg) {
+ down_ram_addr = usbd->ram_addr;
+ } else {
+ down_ram_addr = CONFIG_RAMDISK_ADDR;
+ run_cmd("ramboot");
+ }
+#endif
+ return 1;
+
+#ifdef CONFIG_DOWN_PHONE
+ case COMMAND_DOWN_PHONE:
+ printf("COMMAND_RESET_PHONE\n");
+
+ usbd_phone_down();
+
+ *((ulong *) usbd->tx_data) = STATUS_DONE;
+ usbd->send_data(usbd->tx_data, usbd->tx_len);
+ return 1;
+
+ case COMMAND_CHANGE_USB:
+ printf("COMMAND_CHANGE_USB\n");
+
+ /* Stop USB */
+ usbd->usb_stop();
+
+ usbd_path_change();
+
+ do_reset();
+ return 0;
+#endif
+ case COMMAND_CSA_CLEAR:
+ printf("COMMAND_CSA_CLEAR\n");
+ part_id = get_part_id("csa");
+ img_type = IMG_MODEM;
+ break;
+
+ case COMMAND_PROGRESS:
+ if (usbd->set_progress)
+ usbd->set_progress(arg);
+ return 1;
+
+ default:
+ printf("Error: Unknown command -> (%d)\n", (int)cmd);
+ return 1;
+ }
+
+ /* Erase and Write to NAND */
+ switch (img_type) {
+ case IMG_BOOT:
+ ofs = parts[part_id]->offset;
+#ifdef CONFIG_RECOVERY
+ {
+ /* block is fixed:
+ 1m = ipl(16k)+recovery(240k)+bootloader(768k)*/
+ long *buf = (long *)down_ram_addr;
+ u32 ofst;
+ u32 bootloader_edge = parts[part_id]->size;
+ u32 bootloader_addr = bootloader_edge >> 2;
+ u32 recovery_edge = bootloader_addr;
+ u32 recovery_addr = recovery_edge >> 4;
+ u32 ipl_addr = 0;
+
+ if (len > bootloader_addr) {
+ ofst = bootloader_addr / sizeof(buf);
+ if (*(buf + ofst) == 0xea000012) {
+ /* case: ipl + recovery + bootloader */
+ printf("target: ipl + recovery + loader\n");
+ ofs = ipl_addr;
+ } else {
+ /* case: unknown format */
+ printf("target: unknown\n");
+ *((ulong *) usbd->tx_data) = STATUS_ERROR;
+ usbd->send_data(usbd->tx_data, usbd->tx_len);
+ return 0;
+ }
+ } else {
+ ofst = recovery_addr/sizeof(buf);
+ if (*(buf + ofst) == 0xea000012 &&
+ *(buf + ofst - 1) == 0x00000000) {
+ /* case: ipl + bootloader (old type) */
+ printf("target: ipl + bootloader\n");
+ ofs = ipl_addr;
+ } else {
+ /* case: bootloader only */
+ printf("target: bootloader\n");
+ ofs = bootloader_addr;
+
+ /* skip revision check */
+ down_mode = MODE_FORCE;
+ }
+ }
+
+ sprintf(offset, "%x", (uint)ofs);
+ sprintf(length, "%x", parts[part_id]->size);
+
+ /* check block is locked/locked-tight */
+ ret = nand_cmd(3, offset, length, NULL);
+ if (ret) {
+ printf("target is locked%s\n",
+ (ret == 1) ? "-tight" : "");
+ printf("-> try at recovery mode "
+ "to update 'system'.\n");
+ printf(" how-to: reset "
+ "while pressing volume up and down.\n");
+ *((ulong *) usbd->tx_data) = STATUS_ERROR;
+ usbd->send_data(usbd->tx_data, usbd->tx_len);
+ return 0;
+ }
+ }
+#endif
+#ifdef CONFIG_S5PC1XX
+ /* Workaround: for prevent revision mismatch */
+ if (cpu_is_s5pc110() && (down_mode != MODE_FORCE)) {
+ int img_rev = 1;
+ long *img_header = (long *)down_ram_addr;
+
+ if (*img_header == 0xea000012)
+ img_rev = 0;
+ else if (*(img_header + 0x400) == 0xea000012)
+ img_rev = 2;
+
+ if (img_rev != s5pc1xx_get_cpu_rev()) {
+ printf("CPU revision mismatch!\n"
+ "bootloader is %s%s\n"
+ "download image is %s%s\n",
+ s5pc1xx_get_cpu_rev() ? "EVT1" : "EVT0",
+ s5pc1xx_get_cpu_rev() == 2 ? "-Fused" : "",
+ img_rev ? "EVT1" : "EVT0",
+ img_rev == 2 ? "-Fused" : "");
+ *((ulong *) usbd->tx_data) = STATUS_ERROR;
+ usbd->send_data(usbd->tx_data, usbd->tx_len);
+ return 0;
+ }
+ }
+#endif
+#if defined(CONFIG_ENV_IS_IN_NAND) || defined(CONFIG_ENV_IS_IN_ONENAND)
+ /* Erase the environment also when write bootloader */
+ {
+ int param_id;
+ param_id = get_part_id("params");
+
+ if (param_id == -1) {
+ sprintf(offset, "%x", CONFIG_ENV_ADDR);
+ sprintf(length, "%x", CONFIG_ENV_SIZE);
+ } else {
+ sprintf(offset, "%x", parts[param_id]->offset);
+ sprintf(length, "%x", parts[param_id]->size);
+ }
+ nand_cmd(0, offset, length, NULL);
+ }
+#endif
+ sprintf(offset, "%x", (uint)ofs);
+ if (ofs != 0)
+ sprintf(length, "%x", parts[part_id]->size - (uint)ofs);
+ else
+ sprintf(length, "%x", parts[part_id]->size);
+
+ /* Erase */
+ nand_cmd(0, offset, length, NULL);
+ /* Write */
+ sprintf(length, "%x", (unsigned int) len);
+ ret = nand_cmd(1, ramaddr, offset, length);
+ break;
+
+ case IMG_KERNEL:
+ sprintf(offset, "%x", parts[part_id]->offset);
+ sprintf(length, "%x", parts[part_id]->size);
+
+ /* Erase */
+ nand_cmd(0, offset, length, NULL);
+ /* Write */
+ sprintf(length, "%x", (unsigned int) len);
+ ret = nand_cmd(1, ramaddr, offset, length);
+ break;
+
+ /* File Systems */
+ case IMG_FILESYSTEM:
+ /* Erase the qboot also when write ubi image */
+ {
+ int qboot_id;
+ qboot_id = get_part_id("qboot");
+
+ if (qboot_id != -1) {
+ sprintf(offset, "%x", parts[qboot_id]->offset);
+ sprintf(length, "%x", parts[qboot_id]->size);
+ nand_cmd(0, offset, length, NULL);
+ }
+ }
+ ret = write_file_system(ramaddr, len, offset, length,
+ part_id, ubi_update);
+ break;
+
+ case IMG_MODEM:
+ sprintf(offset, "%x", parts[part_id]->offset);
+ sprintf(length, "%x", parts[part_id]->size);
+
+ /* Erase */
+ if (!arg)
+ nand_cmd(0, offset, length, NULL);
+ else
+ printf("CSA Clear will be skipped temporary\n");
+
+ /* Write : arg (0 Modem) / (1 CSA) */
+ if (!arg) {
+ sprintf(length, "%x", (unsigned int) len);
+ ret = nand_cmd(1, ramaddr, offset, length);
+ }
+ break;
+
+#ifdef CONFIG_CMD_MMC
+ case IMG_MMC:
+ if (mmc_part_write)
+ ret = write_file_mmc_part(usbd, ramaddr,
+ len, offset, length);
+ else
+ ret = write_file_mmc(usbd, ramaddr,
+ len, offset, length);
+ break;
+#endif
+
+ default:
+ /* Retry? */
+ write_part--;
+ }
+
+ if (ret) {
+ /* Retry this commad */
+ *((ulong *) usbd->tx_data) = STATUS_RETRY;
+ usbd->send_data(usbd->tx_data, usbd->tx_len);
+ return 1;
+ } else
+ *((ulong *) usbd->tx_data) = STATUS_DONE;
+
+ /* Write image success -> Report status */
+ usbd->send_data(usbd->tx_data, usbd->tx_len);
+
+ write_part++;
+
+ /* Reset write count for another image */
+ if (flag) {
+ write_part = 0;
+ fs_offset = 0;
+#ifdef CONFIG_USE_YAFFS
+ yaffs_len = 0;
+#endif
+ }
+
+ return 1;
+}
+
+static const char *recv_key = "SAMSUNG";
+static const char *tx_key = "MPL";
+
+int do_usbd_down(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+{
+ struct usbd_ops *usbd;
+ int err;
+
+ if (argc > 1)
+ down_mode = simple_strtoul(argv[1], NULL, 10);
+ else
+ down_mode = MODE_NORMAL;
+
+ printf("USB Downloader v%s\n", APP_VERSION);
+
+ /* get partition info */
+ err = get_part_info();
+ if (err)
+ return err;
+
+ /* interface setting */
+ usbd = usbd_set_interface(&usbd_ops);
+ down_ram_addr = usbd->ram_addr;
+
+ /* init the usb controller */
+ usbd->usb_init();
+
+ /* receive setting */
+ usbd->recv_setup(usbd->rx_data, usbd->rx_len);
+
+ /* detect the download request from Host PC */
+ if (usbd->recv_data()) {
+ if (strncmp(usbd->rx_data, recv_key, strlen(recv_key)) == 0) {
+ printf("Download request from the Host PC\n");
+ msleep(30);
+
+ strcpy(usbd->tx_data, tx_key);
+ usbd->send_data(usbd->tx_data, usbd->tx_len);
+ } else {
+ printf("No download request from the Host PC!! 1\n");
+ return 0;
+ }
+ } else {
+ printf("No download request from the Host PC!!\n");
+ return 0;
+ }
+
+ printf("Receive the packet\n");
+
+ /* receive the data from Host PC */
+ while (1) {
+ usbd->recv_setup(usbd->rx_data, usbd->rx_len);
+
+ if (usbd->recv_data()) {
+ if (process_data(usbd) == 0)
+ return 0;
+ }
+ }
+
+ return 0;
+}
+
+U_BOOT_CMD(usbdown, CONFIG_SYS_MAXARGS, 1, do_usbd_down,
+ "Initialize USB device and Run USB Downloader (specific)",
+ "- normal mode\n"
+ "usbdown mode - specific mode (0: NORAML, 1: FORCE)\n"
+);
#else
#error "CONFIG_SERIAL? missing."
#endif
-#elif defined(CONFIG_S5PC1XX)
+#elif defined(CONFIG_S5PC1XX) || defined(CONFIG_S5P64XX)
#if defined(CONFIG_SERIAL0)
- return &s5pc1xx_serial0_device;
+ return &s5p_serial0_device;
#elif defined(CONFIG_SERIAL1)
- return &s5pc1xx_serial1_device;
+ return &s5p_serial1_device;
#elif defined(CONFIG_SERIAL2)
- return &s5pc1xx_serial2_device;
+ return &s5p_serial2_device;
#elif defined(CONFIG_SERIAL3)
- return &s5pc1xx_serial3_device;
+ return &s5p_serial3_device;
#else
#error "CONFIG_SERIAL? missing."
#endif
COBJS-$(CONFIG_SYS_NS16550) += ns16550.o
COBJS-$(CONFIG_DRIVER_S3C4510_UART) += s3c4510b_uart.o
COBJS-$(CONFIG_S3C64XX) += s3c64xx.o
- COBJS-$(CONFIG_S5PC1XX) += serial_s5pc1xx.o
- COBJS-$(CONFIG_S5P64XX) += serial_s5pc1xx.o
+ COBJS-$(CONFIG_S5PC1XX) += serial_s5p.o
++COBJS-$(CONFIG_S5P64XX) += serial_s5p.o
COBJS-$(CONFIG_SYS_NS16550_SERIAL) += serial.o
COBJS-$(CONFIG_CLPS7111_SERIAL) += serial_clps7111.o
COBJS-$(CONFIG_IMX_SERIAL) += serial_imx.o
--- /dev/null
+ /*
+ * (C) Copyright 2009 SAMSUNG Electronics
+ * Minkyu Kang <mk7.kang@samsung.com>
+ * Heungjun Kim <riverful.kim@samsung.com>
+ *
+ * based on drivers/serial/s3c64xx.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+ #include <common.h>
+ #include <asm/io.h>
+ #include <asm/arch/uart.h>
+ #include <asm/arch/clk.h>
+ #include <serial.h>
+
+ static inline struct s5p_uart *s5p_get_base_uart(int dev_index)
+ {
+ u32 offset = dev_index * sizeof(struct s5p_uart);
+
++#ifdef CONFIG_S5PC1XX
+ if (cpu_is_s5pc100())
+ return (struct s5p_uart *)(S5PC100_UART_BASE + offset);
+ else
+ return (struct s5p_uart *)(S5PC110_UART_BASE + offset);
++#elif CONFIG_S5P64XX
++ if (cpu_is_s5p6442())
++ return (struct s5pc1xx_uart *)(S5P6442_UART_BASE + offset);
++ else
++ return NULL;
++#endif
+ }
+
+ /*
+ * The coefficient, used to calculate the baudrate on S5P UARTs is
+ * calculated as
+ * C = UBRDIV * 16 + number_of_set_bits_in_UDIVSLOT
+ * however, section 31.6.11 of the datasheet doesn't recomment using 1 for 1,
+ * 3 for 2, ... (2^n - 1) for n, instead, they suggest using these constants:
+ */
+ static const int udivslot[] = {
+ 0,
+ 0x0080,
+ 0x0808,
+ 0x0888,
+ 0x2222,
+ 0x4924,
+ 0x4a52,
+ 0x54aa,
+ 0x5555,
+ 0xd555,
+ 0xd5d5,
+ 0xddd5,
+ 0xdddd,
+ 0xdfdd,
+ 0xdfdf,
+ 0xffdf,
+ };
+
+ void serial_setbrg_dev(const int dev_index)
+ {
+ DECLARE_GLOBAL_DATA_PTR;
+ struct s5p_uart *const uart = s5p_get_base_uart(dev_index);
+ u32 pclk = get_pclk();
+ u32 baudrate = gd->baudrate;
+ u32 val;
+
+ val = pclk / baudrate;
+
+ writel(val / 16 - 1, &uart->ubrdiv);
+ writew(udivslot[val % 16], &uart->udivslot);
+ }
+
+ /*
+ * Initialise the serial port with the given baudrate. The settings
+ * are always 8 data bits, no parity, 1 stop bit, no start bits.
+ */
+ int serial_init_dev(const int dev_index)
+ {
+ struct s5p_uart *const uart = s5p_get_base_uart(dev_index);
+
+ /* reset and enable FIFOs, set triggers to the maximum */
+ writel(0, &uart->ufcon);
+ writel(0, &uart->umcon);
+ /* 8N1 */
+ writel(0x3, &uart->ulcon);
+ /* No interrupts, no DMA, pure polling */
+ writel(0x245, &uart->ucon);
+
+ serial_setbrg_dev(dev_index);
+
+ return 0;
+ }
+
+ static int serial_err_check(const int dev_index, int op)
+ {
+ struct s5p_uart *const uart = s5p_get_base_uart(dev_index);
+ unsigned int mask;
+
+ /*
+ * UERSTAT
+ * Break Detect [3]
+ * Frame Err [2] : receive operation
+ * Parity Err [1] : receive operation
+ * Overrun Err [0] : receive operation
+ */
+ if (op)
+ mask = 0x8;
+ else
+ mask = 0xf;
+
+ return readl(&uart->uerstat) & mask;
+ }
+
+ /*
+ * Read a single byte from the serial port. Returns 1 on success, 0
+ * otherwise. When the function is succesfull, the character read is
+ * written into its argument c.
+ */
+ int serial_getc_dev(const int dev_index)
+ {
+ struct s5p_uart *const uart = s5p_get_base_uart(dev_index);
+
+ /* wait for character to arrive */
+ while (!(readl(&uart->utrstat) & 0x1)) {
+ if (serial_err_check(dev_index, 0))
+ return 0;
+ }
+
+ return (int)(readl(&uart->urxh) & 0xff);
+ }
+
+ /*
+ * Output a single byte to the serial port.
+ */
+ void serial_putc_dev(const char c, const int dev_index)
+ {
+ struct s5p_uart *const uart = s5p_get_base_uart(dev_index);
+
+ /* wait for room in the tx FIFO */
+ while (!(readl(&uart->utrstat) & 0x2)) {
+ if (serial_err_check(dev_index, 1))
+ return;
+ }
+
+ writel(c, &uart->utxh);
+
+ /* If \n, also do \r */
+ if (c == '\n')
+ serial_putc('\r');
+ }
+
+ /*
+ * Test whether a character is in the RX buffer
+ */
+ int serial_tstc_dev(const int dev_index)
+ {
+ struct s5p_uart *const uart = s5p_get_base_uart(dev_index);
+
+ return (int)(readl(&uart->utrstat) & 0x1);
+ }
+
+ void serial_puts_dev(const char *s, const int dev_index)
+ {
+ while (*s)
+ serial_putc_dev(*s++, dev_index);
+ }
+
+ /* Multi serial device functions */
+ #define DECLARE_S5P_SERIAL_FUNCTIONS(port) \
+ int s5p_serial##port##_init(void) { return serial_init_dev(port); } \
+ void s5p_serial##port##_setbrg(void) { serial_setbrg_dev(port); } \
+ int s5p_serial##port##_getc(void) { return serial_getc_dev(port); } \
+ int s5p_serial##port##_tstc(void) { return serial_tstc_dev(port); } \
+ void s5p_serial##port##_putc(const char c) { serial_putc_dev(c, port); } \
+ void s5p_serial##port##_puts(const char *s) { serial_puts_dev(s, port); }
+
+ #define INIT_S5P_SERIAL_STRUCTURE(port, name, bus) { \
+ name, \
+ bus, \
+ s5p_serial##port##_init, \
+ NULL, \
+ s5p_serial##port##_setbrg, \
+ s5p_serial##port##_getc, \
+ s5p_serial##port##_tstc, \
+ s5p_serial##port##_putc, \
+ s5p_serial##port##_puts, }
+
+ DECLARE_S5P_SERIAL_FUNCTIONS(0);
+ struct serial_device s5p_serial0_device =
+ INIT_S5P_SERIAL_STRUCTURE(0, "s5pser0", "S5PUART0");
+ DECLARE_S5P_SERIAL_FUNCTIONS(1);
+ struct serial_device s5p_serial1_device =
+ INIT_S5P_SERIAL_STRUCTURE(1, "s5pser1", "S5PUART1");
+ DECLARE_S5P_SERIAL_FUNCTIONS(2);
+ struct serial_device s5p_serial2_device =
+ INIT_S5P_SERIAL_STRUCTURE(2, "s5pser2", "S5PUART2");
+ DECLARE_S5P_SERIAL_FUNCTIONS(3);
+ struct serial_device s5p_serial3_device =
+ INIT_S5P_SERIAL_STRUCTURE(3, "s5pser3", "S5PUART3");
COBJS-$(CONFIG_VIDEO_SED13806) += sed13806.o
COBJS-$(CONFIG_SED156X) += sed156x.o
COBJS-$(CONFIG_VIDEO_SM501) += sm501.o
- COBJS-$(CONFIG_VIDEO_SMI_LYNXEM) += smiLynxEM.o
+ COBJS-$(CONFIG_VIDEO_SMI_LYNXEM) += smiLynxEM.o videomodes.o
COBJS-$(CONFIG_VIDEO_VCXK) += bus_vcxk.o
- COBJS-y += videomodes.o
+COBJS-$(CONFIG_S5PC1XXFB) += s5p-fb.o s5p-fimd.o s5p-spi.o
+COBJS-$(CONFIG_S6E63M0) += s6e63m0.o
+COBJS-$(CONFIG_S6D16A0X) += s6d16a0x.o
+COBJS-$(CONFIG_AMS701KA) += ams701ka.o
+COBJS-$(CONFIG_LD9040) += ld9040.o
+#COBJS-$(CONFIG_S5PC1XXFB) += s5p-fb.o s5p_fimd_aquila.o tl2796_aquila.o
+#COBJS-$(CONFIG_S5PC1XXFB) += s5p-dualfb.o s5p-dualfimd.o tl2796_dual.o
+#COBJS-$(CONFIG_S5PC1XXFB) += s5p-dualfb.o s5p_dualfimd_aquila.o tl2796_dual_aquila.o
+#COBJS-$(CONFIG_SUBLCD) += eltz_lcd.o
++#COBJS-y += videomodes.o
+COBJS-$(CONFIG_S5PC1XXFB) += font_8x16.o fbutils.o
COBJS := $(COBJS-y)
SRCS := $(COBJS:.o=.c)
--- /dev/null
- struct s5pc1xx_gpio_bank *cs_bank;
- struct s5pc1xx_gpio_bank *clk_bank;
- struct s5pc1xx_gpio_bank *si_bank;
- struct s5pc1xx_gpio_bank *so_bank;
+#define COMMAND_ONLY 0xFE
+#define DATA_ONLY 0xFF
+#define PACKET_LEN 8
+
+struct spi_platform_data {
++ struct s5p_gpio_bank *cs_bank;
++ struct s5p_gpio_bank *clk_bank;
++ struct s5p_gpio_bank *si_bank;
++ struct s5p_gpio_bank *so_bank;
+
+ unsigned int cs_num;
+ unsigned int clk_num;
+ unsigned int si_num;
+ unsigned int so_num;
+
+ unsigned int set_rev;
+};
+
+void spi_write_byte(struct spi_platform_data *spi,
+ unsigned char address, unsigned char command);
+void spi_read_byte(struct spi_platform_data *spi,
+ unsigned char address, unsigned char command);
#define CONFIG_DOS_PARTITION 1
+ /*
+ * Ethernet Contoller driver
+ */
+ #ifdef CONFIG_CMD_NET
+ #define CONFIG_NET_MULTI
+ #define CONFIG_SMC911X 1 /* we have a SMC9115 on-board */
+ #define CONFIG_SMC911X_16_BIT 1 /* SMC911X_16_BIT Mode */
+ #define CONFIG_SMC911X_BASE 0x98800300 /* SMC911X Drive Base */
+ #define CONFIG_ENV_SROM_BANK 3 /* Select SROM Bank-3 for Ethernet*/
+ #endif /* CONFIG_CMD_NET */
+
+/* USB Downloader */
+#define CONFIG_CMD_USBDOWN
+#define CONFIG_SAMSUNG_USB
+#define CONFIG_OTG_CLK_OSCC
+#define CONFIG_SYS_DOWN_ADDR CONFIG_SYS_SDRAM_BASE
+#define CONFIG_RAMDISK_ADDR 0x33000000
+
#endif /* __CONFIG_H */
#ifdef CONFIG_MCAST_TFTP
int (*mcast) (struct eth_device*, u32 ip, u8 set);
#endif
+ int (*write_hwaddr) (struct eth_device*);
struct eth_device *next;
void *priv;
+ int mtu;
};
extern int eth_initialize(bd_t *bis); /* Initialize network subsystem */
extern struct serial_device s3c24xx_serial2_device;
#endif
-#if defined(CONFIG_S5PC1XX)
+#if defined(CONFIG_S5PC1XX) || defined(CONFIG_S5P64XX)
- extern struct serial_device s5pc1xx_serial0_device;
- extern struct serial_device s5pc1xx_serial1_device;
- extern struct serial_device s5pc1xx_serial2_device;
- extern struct serial_device s5pc1xx_serial3_device;
+ extern struct serial_device s5p_serial0_device;
+ extern struct serial_device s5p_serial1_device;
+ extern struct serial_device s5p_serial2_device;
+ extern struct serial_device s5p_serial3_device;
#endif
#if defined(CONFIG_OMAP3_ZOOM2)
--- /dev/null
- ln -s $(SRCTREE)/cpu/$(CPU)/start.S $@
+#
+# Samsung SMDK6442(S5P6442) board OneNAND IPL
+#
+# Copyright (C) 2009 Samsung Electronics
+# Minkyu Kang <mk7.kang@samsung.com>
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+
+include $(TOPDIR)/config.mk
+TEXT_BASE = 0xD0021800
+TEXT_BASE8K = 0xD0023800
+
+LDSCRIPT= $(TOPDIR)/onenand_ipl/board/$(BOARDDIR)/u-boot-onenand.lds
+LDFLAGS = -Bstatic -T $(LDSCRIPT) -Ttext $(TEXT_BASE) $(PLATFORM_LDFLAGS)
+AFLAGS += -DCONFIG_ONENAND_IPL -g
+CFLAGS += -DCONFIG_ONENAND_IPL -g -D__HAVE_ARCH_MEMCPY32
+OBJCFLAGS += --gap-fill=0x00
+
+SOBJS := lowlevel_init.o mem_setup.o
+SOBJS += start.o _memcpy32.o
+COBJS += onenand_read.o
+COBJS += onenand_boot.o
+
+SRCS := $(addprefix $(obj),$(SOBJS:.o=.S) $(COBJS:.o=.c))
+OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS))
+__OBJS := $(SOBJS) $(COBJS)
+LNDIR := $(OBJTREE)/onenand_ipl/board/$(BOARDDIR)
+
+onenandobj := $(OBJTREE)/onenand_ipl/
+
+ALL = $(onenandobj)onenand-ipl $(onenandobj)onenand-ipl.bin $(onenandobj)onenand-ipl-8k.bin
+
+all: $(obj).depend $(ALL)
+
+$(onenandobj)onenand-ipl-8k.bin: $(onenandobj)onenand-ipl checksum
+ $(OBJCOPY) ${OBJCFLAGS} --pad-to=$(TEXT_BASE8K) -O binary $< $@
+ $(onenandobj)/board/$(BOARDDIR)/checksum $@
+
+$(onenandobj)onenand-ipl.bin: $(onenandobj)onenand-ipl
+ $(OBJCOPY) ${OBJCFLAGS} -O binary $< $@
+
+$(onenandobj)onenand-ipl: $(OBJS)
+ cd $(LNDIR) && $(LD) $(LDFLAGS) $$UNDEF_SYM $(__OBJS) \
+ -Map $@.map -o $@
+
+checksum: checksum.c
+ $(HOSTCC) -o $@ $<
+
+# create symbolic links from common files
+
+# from cpu directory
+$(obj)start.S:
+ @rm -f $@
- ln -sf $(SRCTREE)/lib_arm/_memcpy32.S $@
++ ln -s $(SRCTREE)/$(CPUDIR)/start.S $@
+
+$(obj)mem_setup.S:
+ ln -sf $(SRCTREE)/board/$(BOARDDIR)/mem_setup.S $@
+
+$(obj)lowlevel_init.S:
+ ln -sf $(SRCTREE)/board/$(BOARDDIR)/lowlevel_init.S $@
+
+# from lib_arm
+$(obj)_memcpy32.S:
++ ln -sf $(SRCTREE)/arch/$(ARCH)/lib/_memcpy32.S $@
+
+# from onenand_ipl directory
+$(obj)onenand_ipl.h:
+ @rm -f $@
+ ln -s $(SRCTREE)/onenand_ipl/onenand_ipl.h $@
+
+$(obj)onenand_boot.c: $(obj)onenand_ipl.h
+ @rm -f $@
+ ln -s $(SRCTREE)/onenand_ipl/onenand_boot.c $@
+
+$(obj)onenand_read.c: $(obj)onenand_ipl.h
+ @rm -f $@
+ ln -s $(SRCTREE)/onenand_ipl/onenand_read.c $@
+
+$(obj)samsung_read.c: $(obj)onenand_ipl.h
+ @rm -f $@
+ ln -s $(SRCTREE)/onenand_ipl/samsung_read.c $@
+
+#########################################################################
+
+$(obj)%.o: $(obj)%.S
+ $(CC) $(AFLAGS) -c -o $@ $<
+
+$(obj)%.o: $(obj)$.c
+ $(CC) $(CFLAGS) -c -o $@ $<
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+clean:
+ rm onenand_boot.c onenand_read.c
+
+#########################################################################
--- /dev/null
- ln -s $(SRCTREE)/cpu/$(CPU)/start.S $@
+#
+# Samsung SMDKC100(S5PC100) board OneNAND IPL
+#
+# Copyright (C) 2009 Samsung Electronics
+# Minkyu Kang <mk7.kang@samsung.com>
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+
+include $(TOPDIR)/config.mk
+TEXT_BASE = 0xD0034000
+TEXT_BASE2K = 0xD0034800
+TEXT_BASE4K = 0xD0035000
+TEXT_BASE16K = 0xD0038000
+
+LDSCRIPT= $(TOPDIR)/onenand_ipl/board/$(BOARDDIR)/u-boot-onenand.lds
+LDFLAGS = -Bstatic -T $(LDSCRIPT) -Ttext $(TEXT_BASE) $(PLATFORM_LDFLAGS)
+AFLAGS += -DCONFIG_ONENAND_IPL -g
+CFLAGS += -DCONFIG_ONENAND_IPL -g
+OBJCFLAGS += --gap-fill=0x00
+
+SOBJS := lowlevel_init.o mem_setup.o
+SOBJS += start.o
+COBJS += onenand_read.o samsung_read.o
+COBJS += onenand_boot.o
+
+SRCS := $(addprefix $(obj),$(SOBJS:.o=.S) $(COBJS:.o=.c))
+OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS))
+__OBJS := $(SOBJS) $(COBJS)
+LNDIR := $(OBJTREE)/onenand_ipl/board/$(BOARDDIR)
+
+onenandobj := $(OBJTREE)/onenand_ipl/
+
+ALL = $(onenandobj)onenand-ipl $(onenandobj)onenand-ipl.bin $(onenandobj)onenand-ipl-2k.bin $(onenandobj)onenand-ipl-4k.bin $(onenandobj)onenand-ipl-16k.bin
+
+all: $(obj).depend $(ALL)
+
+$(onenandobj)onenand-ipl-2k.bin: $(onenandobj)onenand-ipl
+ $(OBJCOPY) ${OBJCFLAGS} --pad-to=$(TEXT_BASE2K) -O binary $< $@
+
+$(onenandobj)onenand-ipl-4k.bin: $(onenandobj)onenand-ipl
+ $(OBJCOPY) ${OBJCFLAGS} --pad-to=$(TEXT_BASE4K) -O binary $< $@
+
+$(onenandobj)onenand-ipl-16k.bin: $(onenandobj)onenand-ipl
+ $(OBJCOPY) ${OBJCFLAGS} --pad-to=$(TEXT_BASE16K) -O binary $< $@
+
+$(onenandobj)onenand-ipl.bin: $(onenandobj)onenand-ipl
+ $(OBJCOPY) ${OBJCFLAGS} -O binary $< $@
+
+$(onenandobj)onenand-ipl: $(OBJS)
+ cd $(LNDIR) && $(LD) $(LDFLAGS) $$UNDEF_SYM $(__OBJS) \
+ -Map $@.map -o $@
+
+# create symbolic links from common files
+
+# from cpu directory
+$(obj)start.S:
+ @rm -f $@
++ ln -s $(SRCTREE)/$(CPUDIR)/start.S $@
+
+$(obj)mem_setup.S:
+ ln -sf $(SRCTREE)/board/$(BOARDDIR)/mem_setup.S $@
+
+$(obj)lowlevel_init.S:
+ ln -sf $(SRCTREE)/board/$(BOARDDIR)/lowlevel_init.S $@
+
+# from onenand_ipl directory
+$(obj)onenand_ipl.h:
+ @rm -f $@
+ ln -s $(SRCTREE)/onenand_ipl/onenand_ipl.h $@
+
+$(obj)onenand_boot.c: $(obj)onenand_ipl.h
+ @rm -f $@
+ ln -s $(SRCTREE)/onenand_ipl/onenand_boot.c $@
+
+$(obj)onenand_read.c: $(obj)onenand_ipl.h
+ @rm -f $@
+ ln -s $(SRCTREE)/onenand_ipl/onenand_read.c $@
+
+$(obj)samsung_read.c: $(obj)onenand_ipl.h
+ @rm -f $@
+ ln -s $(SRCTREE)/onenand_ipl/samsung_read.c $@
+
+#########################################################################
+
+$(obj)%.o: $(obj)%.S
+ $(CC) $(AFLAGS) -c -o $@ $<
+
+$(obj)%.o: $(obj)$.c
+ $(CC) $(CFLAGS) -c -o $@ $<
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+clean:
+ rm onenand_boot.c onenand_read.c
+
+#########################################################################
--- /dev/null
- ln -s $(SRCTREE)/cpu/$(CPU)/start.S $@
+#
+# Samsung Universal(S5PC100/S5PC110) board OneNAND IPL
+#
+# Copyright (C) 2009 Samsung Electronics
+# Minkyu Kang <mk7.kang@samsung.com>
+# Kyungmin Park <kyungmin.park@samsung.com>
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+
+include $(TOPDIR)/config.mk
+# S5PC100 loads at 0x34000
+# S5PC110 loads at 0x30000 (EVT0)
+# S5PC110 loads at 0x20010 (EVT1)
+# Now it uses the S5PC100 as default
+# If you use the S5PC110, the load address is relocated at start.S
+# XXX Never set it S5PC110 it don't relocate it
+# FIXME BL1 header uses 16 bytes at S5PC110 EVT1
+TEXT_BASE = 0xD0034000
+TEXT_BASE16K_EVT0 = 0xD0038000
+TEXT_BASE16K_EVT1 = 0xD0037ff0
+TEXT_BASE16K_EVT1_SEC = 0xD0037000
+
+LDSCRIPT= $(TOPDIR)/onenand_ipl/board/$(BOARDDIR)/u-boot-onenand.lds
+LDFLAGS = -Bstatic -T $(LDSCRIPT) -Ttext $(TEXT_BASE) $(PLATFORM_LDFLAGS)
+AFLAGS += -DCONFIG_ONENAND_IPL -g -UTEXT_BASE -DTEXT_BASE=$(TEXT_BASE)
+CFLAGS += -DCONFIG_ONENAND_IPL -g -D__HAVE_ARCH_MEMCPY32
+OBJCFLAGS += --gap-fill=0x00
+
+SOBJS := lowlevel_init.o mem_setup.o
+SOBJS += start.o _memcpy32.o
+SOBJS += cache.o
+COBJS += onenand_read.o samsung_read.o
+COBJS += onenand_boot.o
+
+SRCS := $(addprefix $(obj),$(SOBJS:.o=.S) $(COBJS:.o=.c))
+OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS))
+__OBJS := $(SOBJS) $(COBJS)
+LNDIR := $(OBJTREE)/onenand_ipl/board/$(BOARDDIR)
+
+onenandobj := $(OBJTREE)/onenand_ipl/
+
+ALL = $(onenandobj)onenand-ipl $(onenandobj)onenand-ipl.bin $(onenandobj)onenand-ipl-16k-evt0.bin $(onenandobj)onenand-ipl-16k-evt1.bin $(onenandobj)onenand-ipl-fused.bin
+
+all: $(obj).depend $(ALL)
+
+$(onenandobj)onenand-ipl-16k-evt0.bin: $(onenandobj)onenand-ipl checksum
+ $(OBJCOPY) ${OBJCFLAGS} --pad-to=$(TEXT_BASE16K_EVT0) -O binary $< $@
+ $(onenandobj)/board/$(BOARDDIR)/checksum $@ 0
+
+$(onenandobj)onenand-ipl-16k-evt1.bin: $(onenandobj)onenand-ipl checksum
+ $(OBJCOPY) ${OBJCFLAGS} --pad-to=$(TEXT_BASE16K_EVT1) -O binary $< $@
+ $(onenandobj)/board/$(BOARDDIR)/checksum $@ 1
+ cat $(onenandobj)/board/$(BOARDDIR)/header.bin $@ > $(onenandobj)onenand-ipl-16k.bin
+
+$(onenandobj)onenand-ipl-fused.bin: $(onenandobj)onenand-ipl checksum
+ $(OBJCOPY) ${OBJCFLAGS} --pad-to=$(TEXT_BASE16K_EVT1_SEC) -O binary $< $@
+ cat $(onenandobj)/board/$(BOARDDIR)/bl1.img $@ > $(onenandobj)onenand-ipl-16k-fused.bin
+
+$(onenandobj)onenand-ipl.bin: $(onenandobj)onenand-ipl
+ $(OBJCOPY) ${OBJCFLAGS} -O binary $< $@
+
+$(onenandobj)onenand-ipl: $(OBJS)
+ cd $(LNDIR) && $(LD) $(LDFLAGS) $$UNDEF_SYM $(__OBJS) \
+ -Map $@.map -o $@
+
+checksum: checksum.c
+ $(HOSTCC) -o $@ $<
+
+# create symbolic links from common files
+
+# from cpu directory
+$(obj)start.S:
+ @rm -f $@
- ln -s $(SRCTREE)/cpu/$(CPU)/$(SOC)/cache.S $@
++ ln -s $(SRCTREE)/$(CPUDIR)/start.S $@
+
+# from SoC directory
+$(obj)cache.S:
+ @rm -f $@
- ln -sf $(SRCTREE)/lib_arm/_memcpy32.S $@
++ ln -s $(SRCTREE)/$(CPUDIR)/$(SOC)/cache.S $@
+
+$(obj)mem_setup.S:
+ ln -sf $(SRCTREE)/board/$(BOARDDIR)/mem_setup.S $@
+
+$(obj)lowlevel_init.S:
+ ln -sf $(SRCTREE)/board/$(BOARDDIR)/lowlevel_init.S $@
+
+# from lib_arm
+$(obj)_memcpy32.S:
++ ln -sf $(SRCTREE)/arch/$(ARCH)/lib/_memcpy32.S $@
+
+# from onenand_ipl directory
+$(obj)onenand_ipl.h:
+ @rm -f $@
+ ln -s $(SRCTREE)/onenand_ipl/onenand_ipl.h $@
+
+$(obj)onenand_boot.c: $(obj)onenand_ipl.h
+ @rm -f $@
+ ln -s $(SRCTREE)/onenand_ipl/onenand_boot.c $@
+
+$(obj)onenand_read.c: $(obj)onenand_ipl.h
+ @rm -f $@
+ ln -s $(SRCTREE)/onenand_ipl/onenand_read.c $@
+
+$(obj)samsung_read.c: $(obj)onenand_ipl.h
+ @rm -f $@
+ ln -s $(SRCTREE)/onenand_ipl/samsung_read.c $@
+
+#########################################################################
+
+$(obj)%.o: $(obj)%.S
+ $(CC) $(AFLAGS) -c -o $@ $<
+
+$(obj)%.o: $(obj)$.c
+ $(CC) $(CFLAGS) -c -o $@ $<
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+clean:
+ rm onenand_boot.c onenand_read.c samsung_read.c
+
+#########################################################################
--- /dev/null
- ln -s $(SRCTREE)/cpu/$(CPU)/$@ $@
+#
+# Samsung Universal(S5PC110) board Recovery block
+#
+# Copyright (C) 2010 Samsung Electronics
+# Minkyu Kang <mk7.kang@samsung.com>
+# Kyungmin Park <kyungmin.park@samsung.com>
+#
+
+include $(TOPDIR)/$(RECOVERY_BLOCK)/config.mk
+
+LIB := $(obj)lib$(BOARD).a
+
+SOBJS = start.o reset.o _memcpy32.o
+COBJS = string.o dlmalloc.o cpu_info.o
+COBJS += gpio.o
+COBJS += universal.o
+
+SRCS := $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+
+all: $(LIB)
+
+$(LIB): $(obj).depend $(SOBJS) $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(SOBJS) $(OBJS)
+
+# create symbolic links from common files
+
+$(obj)start.S:
+ @rm -f $@
- ln -s $(SRCTREE)/cpu/$(CPU)/$(SOC)/$@ $@
++ ln -s $(SRCTREE)/$(CPUDIR)/$@ $@
+
+$(obj)reset.S:
+ @rm -f $@
- ln -s $(SRCTREE)/cpu/$(CPU)/$(SOC)/$@ $@
++ ln -s $(SRCTREE)/$(CPUDIR)/$(SOC)/$@ $@
+
+$(obj)cpu_info.c:
+ @rm -f $@
- ln -sf $(SRCTREE)/lib_arm/$@ $@
++ ln -s $(SRCTREE)/$(CPUDIR)/$(SOC)/$@ $@
+
+$(obj)_memcpy32.S:
- ln -s $(SRCTREE)/lib_generic/$@ $@
++ ln -sf $(SRCTREE)/arch/$(ARCH)/lib/$@ $@
+
+$(obj)string.c:
+ @rm -f $@
++ ln -s $(SRCTREE)/lib/$@ $@
+
+$(obj)dlmalloc.c:
+ @rm -f $@
+ ln -s $(SRCTREE)/common/$@ $@
+
+#########################################################################
+
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
--- /dev/null
- void gpio_cfg_pin(struct s5pc1xx_gpio_bank *bank, int gpio, int cfg)
+/*
+ * Copyright (C) 2009-2010 Samsung Electronics
+ * Minkyu Kang <mk7.kang@samsung.com>
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/gpio.h>
+
+#define CON_MASK(x) (0xf << ((x) << 2))
+#define CON_SFR(x, v) ((v) << ((x) << 2))
+
+#define DAT_MASK(x) (0x1 << (x))
+#define DAT_SET(x) (0x1 << (x))
+
+#define PULL_MASK(x) (0x3 << ((x) << 1))
+#define PULL_MODE(x, v) ((v) << ((x) << 1))
+
+#define DRV_MASK(x) (0x3 << ((x) << 1))
+#define DRV_SET(x, m) ((m) << ((x) << 1))
+#define RATE_MASK(x) (0x1 << (x + 16))
+#define RATE_SET(x) (0x1 << (x + 16))
+
- void gpio_direction_output(struct s5pc1xx_gpio_bank *bank, int gpio, int en)
++void gpio_cfg_pin(struct s5p_gpio_bank *bank, int gpio, int cfg)
+{
+ unsigned int value;
+
+ value = readl(&bank->con);
+ value &= ~CON_MASK(gpio);
+ value |= CON_SFR(gpio, cfg);
+ writel(value, &bank->con);
+#if 0
+ if (s5pc1xx_get_cpu_rev() == 0)
+#endif
+ value = readl(&bank->con);
+}
+
- void gpio_direction_input(struct s5pc1xx_gpio_bank *bank, int gpio)
++void gpio_direction_output(struct s5p_gpio_bank *bank, int gpio, int en)
+{
+ unsigned int value;
+
+ gpio_cfg_pin(bank, gpio, GPIO_OUTPUT);
+
+ value = readl(&bank->dat);
+ value &= ~DAT_MASK(gpio);
+ if (en)
+ value |= DAT_SET(gpio);
+ writel(value, &bank->dat);
+#if 0
+ if (s5pc1xx_get_cpu_rev() == 0)
+#endif
+ value = readl(&bank->dat);
+}
+
- void gpio_set_value(struct s5pc1xx_gpio_bank *bank, int gpio, int en)
++void gpio_direction_input(struct s5p_gpio_bank *bank, int gpio)
+{
+ gpio_cfg_pin(bank, gpio, GPIO_INPUT);
+}
+
- unsigned int gpio_get_value(struct s5pc1xx_gpio_bank *bank, int gpio)
++void gpio_set_value(struct s5p_gpio_bank *bank, int gpio, int en)
+{
+ unsigned int value;
+
+ value = readl(&bank->dat);
+ value &= ~DAT_MASK(gpio);
+ if (en)
+ value |= DAT_SET(gpio);
+ writel(value, &bank->dat);
+#if 0
+ if (s5pc1xx_get_cpu_rev() == 0)
+#endif
+ value = readl(&bank->dat);
+}
+
- void gpio_set_pull(struct s5pc1xx_gpio_bank *bank, int gpio, int mode)
++unsigned int gpio_get_value(struct s5p_gpio_bank *bank, int gpio)
+{
+ unsigned int value;
+
+ value = readl(&bank->dat);
+ return !!(value & DAT_MASK(gpio));
+}
+
- void gpio_set_drv(struct s5pc1xx_gpio_bank *bank, int gpio, int mode)
++void gpio_set_pull(struct s5p_gpio_bank *bank, int gpio, int mode)
+{
+ unsigned int value;
+
+ value = readl(&bank->pull);
+ value &= ~PULL_MASK(gpio);
+
+ switch (mode) {
+ case GPIO_PULL_DOWN:
+ case GPIO_PULL_UP:
+ value |= PULL_MODE(gpio, mode);
+ break;
+ default:
+ break;
+ }
+
+ writel(value, &bank->pull);
+#if 0
+ if (s5pc1xx_get_cpu_rev() == 0)
+#endif
+ value = readl(&bank->pull);
+}
+
- void gpio_set_rate(struct s5pc1xx_gpio_bank *bank, int gpio, int mode)
++void gpio_set_drv(struct s5p_gpio_bank *bank, int gpio, int mode)
+{
+ unsigned int value;
+
+ value = readl(&bank->drv);
+ value &= ~DRV_MASK(gpio);
+
+ switch (mode) {
+ case GPIO_DRV_1X:
+ case GPIO_DRV_2X:
+ case GPIO_DRV_3X:
+ case GPIO_DRV_4X:
+ value |= DRV_SET(gpio, mode);
+ break;
+ default:
+ return;
+ }
+
+ writel(value, &bank->drv);
+#if 0
+ if (s5pc1xx_get_cpu_rev() == 0)
+#endif
+ value = readl(&bank->drv);
+}
+
++void gpio_set_rate(struct s5p_gpio_bank *bank, int gpio, int mode)
+{
+ unsigned int value;
+
+ value = readl(&bank->drv);
+ value &= ~RATE_MASK(gpio);
+
+ switch (mode) {
+ case GPIO_DRV_FAST:
+ case GPIO_DRV_SLOW:
+ value |= RATE_SET(gpio);
+ break;
+ default:
+ return;
+ }
+
+ writel(value, &bank->drv);
+#if 0
+ if (s5pc1xx_get_cpu_rev() == 0)
+#endif
+ value = readl(&bank->drv);
+}
+
--- /dev/null
- static unsigned int get_hw_revision(struct s5pc1xx_gpio_bank *bank, int hwrev3)
+/*
+ * Copyright (C) 2009-2010 Samsung Electronics
+ */
+
+#include <common.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/onenand.h>
+#include <asm/io.h>
+#include <asm/arch/cpu.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/keypad.h>
+#include <asm/arch/power.h>
+#include "recovery.h"
+#include "onenand.h"
+
+#ifdef RECOVERY_DEBUG
+#define PUTS(s) serial_puts(DEBUG_MARK""s)
+#else
+#define PUTS(s)
+#endif
+
+#define C110_MACH_START 3100
+#define C100_MACH_START 3000
+
+/* board is MACH_AQUILA and board is like below. */
+#define J1_B2_BOARD 0x0200
+#define LIMO_UNIVERSAL_BOARD 0x0400
+#define LIMO_REAL_BOARD 0x0800
+#define MEDIA_BOARD 0x1000
+#define BAMBOO_BOARD 0x2000
+
+/* board is MACH_GONI and board is like below */
+#define S1_BOARD 0x1000
+#define KESSLER_BOARD 0x4000
+#define SDK_BOARD 0x8000
+
+#define BOARD_MASK 0xFF00
+
+enum {
+ MACH_UNIVERSAL,
+ MACH_TICKERTAPE,
+ MACH_CHANGED,
+ MACH_P1P2, /* Don't remove it */
+ MACH_GEMINUS,
+ MACH_CYPRESS,
+
+ MACH_WMG160 = 160,
+
+ MACH_PSEUDO_END,
+
+ MACH_GONI = 3102,
+};
+
+typedef int (init_fnc_t) (void);
+
+static bd_t bd;
+
+static unsigned int board_rev;
+
+static void sdelay(unsigned long usec)
+{
+ ulong kv;
+
+ do {
+ kv = 0x100000;
+ while (kv)
+ kv--;
+ usec--;
+ } while (usec);
+}
+
+static int hwrevision(int rev)
+{
+ return (board_rev & 0xf) == rev;
+}
+
+static int c110_machine_id(void)
+{
+ return bd.bi_arch_number - C110_MACH_START;
+}
+
+static int mach_is_aquila(void)
+{
+ return bd.bi_arch_number == MACH_TYPE_AQUILA;
+}
+
+static int mach_is_geminus(void)
+{
+ return c110_machine_id() == MACH_GEMINUS;
+}
+
+static int board_is_limo_universal(void)
+{
+ return mach_is_aquila() && (board_rev & LIMO_UNIVERSAL_BOARD);
+}
+
+static int board_is_limo_real(void)
+{
+ return mach_is_aquila() && (board_rev & LIMO_REAL_BOARD);
+}
+
+/* Kessler */
+static int mach_is_goni(void)
+{
+ return bd.bi_arch_number == MACH_GONI;
+}
+
+static int board_is_sdk(void)
+{
+ return mach_is_goni() && (board_rev & SDK_BOARD);
+}
+
+static void check_board_revision(int board, int rev)
+{
+ if (board == MACH_TYPE_AQUILA) {
+ /* Limo Real or Universal */
+ if (rev & LIMO_UNIVERSAL_BOARD)
+ board_rev &= ~J1_B2_BOARD;
+ if (rev & LIMO_REAL_BOARD)
+ board_rev &= ~(J1_B2_BOARD |
+ LIMO_UNIVERSAL_BOARD);
+ if (rev & MEDIA_BOARD)
+ board_rev &= ~(J1_B2_BOARD |
+ LIMO_UNIVERSAL_BOARD);
+ if (rev & BAMBOO_BOARD)
+ board_rev &= ~(J1_B2_BOARD |
+ LIMO_UNIVERSAL_BOARD |
+ LIMO_REAL_BOARD |
+ MEDIA_BOARD);
+ } else if (board == MACH_GONI) {
+ if (rev & KESSLER_BOARD)
+ board_rev &= ~(J1_B2_BOARD |
+ LIMO_UNIVERSAL_BOARD);
+ if (rev & SDK_BOARD)
+ board_rev &= ~(J1_B2_BOARD |
+ LIMO_UNIVERSAL_BOARD);
+ if (rev & S1_BOARD)
+ board_rev &= ~(J1_B2_BOARD | LIMO_UNIVERSAL_BOARD |
+ LIMO_REAL_BOARD);
+ } else {
+ board_rev &= ~BOARD_MASK;
+ }
+}
+
++static unsigned int get_hw_revision(struct s5p_gpio_bank *bank, int hwrev3)
+{
+ unsigned int rev;
+
+ gpio_direction_input(bank, 2);
+ gpio_direction_input(bank, 3);
+ gpio_direction_input(bank, 4);
+ gpio_direction_input(bank, hwrev3);
+
+ gpio_set_pull(bank, 2, GPIO_PULL_NONE); /* HWREV_MODE0 */
+ gpio_set_pull(bank, 3, GPIO_PULL_NONE); /* HWREV_MODE1 */
+ gpio_set_pull(bank, 4, GPIO_PULL_NONE); /* HWREV_MODE2 */
+ gpio_set_pull(bank, hwrev3, GPIO_PULL_NONE); /* HWREV_MODE3 */
+
+ rev = gpio_get_value(bank, 2);
+ rev |= (gpio_get_value(bank, 3) << 1);
+ rev |= (gpio_get_value(bank, 4) << 2);
+ rev |= (gpio_get_value(bank, hwrev3) << 3);
+
+ return rev;
+}
+
+static void check_hw_revision(void)
+{
+ unsigned int board = MACH_UNIVERSAL; /* Default is Universal */
+
+ if (cpu_is_s5pc100()) {
+ struct s5pc100_gpio *gpio =
+ (struct s5pc100_gpio *)S5PC100_GPIO_BASE;
+
+ board_rev = get_hw_revision(&gpio->gpio_j0, 0);
+
+ /* C100 TickerTape */
+ if (board_rev == 3)
+ board = MACH_TICKERTAPE;
+ } else {
+ struct s5pc110_gpio *gpio =
+ (struct s5pc110_gpio *)S5PC110_GPIO_BASE;
+ int hwrev3 = 1;
+
+ board_rev = 0;
+
+ /*
+ * Note Check 'Aquila' board first
+ *
+ * TT: TickerTape
+ * SS: SplitScreen
+ * LRA: Limo Real Aquila
+ * LUA: Limo Universal Aquila
+ * OA: Old Aquila
+ * CYP: Cypress
+ * BB: Bamboo
+ *
+ * ADDR = 0xE0200000 + OFF
+ *
+ * OFF Universal BB LRA LUA OA TT SS CYP
+ * J1: 0x0264 0x10 0x10 0x00 0x00 0x00 0x00 0x00
+ * J2: 0x0284 0x01 0x10 0x00
+ * H1: 0x0C24 W 0x28 0xA8 0x1C 0x0F
+ * H3: 0x0C64 0x03 0x07 0x0F
+ * D1: 0x00C4 0x0F 0x3F 0x3F 0x0F 0xXC 0x3F
+ * I: 0x0224 0x02 0x00 0x08
+ * MP03: 0x0324 0x9x 0xbx 0x9x
+ * MP05: 0x0364 0x80 0x88
+ */
+
+ /* C110 Aquila */
+ if (gpio_get_value(&gpio->gpio_j1, 4) == 0) {
+ board = MACH_TYPE_AQUILA;
+ board_rev |= J1_B2_BOARD;
+
+ gpio_set_pull(&gpio->gpio_j2, 6, GPIO_PULL_NONE);
+ gpio_direction_input(&gpio->gpio_j2, 6);
+
+ /* Check board */
+ if (gpio_get_value(&gpio->gpio_h1, 2) == 0)
+ board_rev |= LIMO_UNIVERSAL_BOARD;
+
+ if (gpio_get_value(&gpio->gpio_h3, 2) == 0)
+ board_rev |= LIMO_REAL_BOARD;
+
+ if (gpio_get_value(&gpio->gpio_j2, 6) == 1)
+ board_rev |= MEDIA_BOARD;
+
+ /* set gpio to default value. */
+ gpio_set_pull(&gpio->gpio_j2, 6, GPIO_PULL_DOWN);
+ gpio_direction_output(&gpio->gpio_j2, 6, 0);
+ }
+
+ /* Workaround: C110 Aquila Rev0.6 */
+ if (board_rev == 6) {
+ board = MACH_TYPE_AQUILA;
+ board_rev |= LIMO_REAL_BOARD;
+ }
+
+ /* C110 Aquila Bamboo */
+ if (gpio_get_value(&gpio->gpio_j2, 0) == 1) {
+ board = MACH_TYPE_AQUILA;
+ board_rev |= BAMBOO_BOARD;
+ }
+
+ /* C110 TickerTape */
+ if (gpio_get_value(&gpio->gpio_d1, 0) == 0 &&
+ gpio_get_value(&gpio->gpio_d1, 1) == 0)
+ board = MACH_TICKERTAPE;
+
+ /* WMG160 - GPH3[0:4] = 0x00 */
+ if (board == MACH_TICKERTAPE) {
+ int i, wmg160 = 1;
+
+ for (i = 0; i < 4; i++) {
+ if (gpio_get_value(&gpio->gpio_h3, i) != 0) {
+ wmg160 = 0;
+ break;
+ }
+ }
+ if (wmg160) {
+ board = MACH_WMG160;
+ hwrev3 = 7;
+ }
+ }
+
+ /* C110 Geminus for rev0.0 */
+ gpio_set_pull(&gpio->gpio_j1, 2, GPIO_PULL_NONE);
+ gpio_direction_input(&gpio->gpio_j1, 2);
+ if (gpio_get_value(&gpio->gpio_j1, 2) == 1) {
+ board = MACH_GEMINUS;
+ if ((board_rev & ~BOARD_MASK) == 3)
+ board_rev &= ~0xff;
+ }
+ gpio_set_pull(&gpio->gpio_j1, 2, GPIO_PULL_DOWN);
+ gpio_direction_output(&gpio->gpio_j1, 2, 0);
+
+ /* C110 Geminus for rev0.1 ~ */
+ gpio_set_pull(&gpio->gpio_j0, 6, GPIO_PULL_NONE);
+ gpio_direction_input(&gpio->gpio_j0, 6);
+ if (gpio_get_value(&gpio->gpio_j0, 6) == 1) {
+ board = MACH_GEMINUS;
+ hwrev3 = 7;
+ }
+ gpio_set_pull(&gpio->gpio_j0, 6, GPIO_PULL_DOWN);
+
+ /* Kessler MP0_5[6] == 1 */
+ gpio_direction_input(&gpio->gpio_mp0_5, 6);
+ if (gpio_get_value(&gpio->gpio_mp0_5, 6) == 1) {
+ /* Cypress: Do this for cypress */
+ gpio_set_pull(&gpio->gpio_j2, 2, GPIO_PULL_NONE);
+ gpio_direction_input(&gpio->gpio_j2, 2);
+ if (gpio_get_value(&gpio->gpio_j2, 2) == 1) {
+ board = MACH_CYPRESS;
+ gpio_direction_output(&gpio->gpio_mp0_5, 6, 0);
+ } else {
+ board = MACH_GONI;
+ board_rev |= KESSLER_BOARD;
+
+ /* Limo SDK MP0_5[4] == 1 */
+ gpio_direction_input(&gpio->gpio_mp0_5, 4);
+ if (gpio_get_value(&gpio->gpio_mp0_5, 4) == 1) {
+ board_rev &= ~KESSLER_BOARD;
+ board_rev |= SDK_BOARD;
+ }
+ }
+ gpio_set_pull(&gpio->gpio_j2, 2, GPIO_PULL_DOWN);
+ hwrev3 = 7;
+ } else {
+ gpio_direction_output(&gpio->gpio_mp0_5, 6, 0);
+ /* Goni S1 board detection */
+ if (board == MACH_TICKERTAPE) {
+ board = MACH_GONI;
+ board_rev |= S1_BOARD;
+ hwrev3 = 7;
+ }
+ }
+
+ board_rev |= get_hw_revision(&gpio->gpio_j0, hwrev3);
+ }
+
+ /* Set machine id */
+ if (board < MACH_PSEUDO_END) {
+ if (cpu_is_s5pc110())
+ bd.bi_arch_number = C110_MACH_START + board;
+ else
+ bd.bi_arch_number = C100_MACH_START + board;
+ } else {
+ bd.bi_arch_number = board;
+ }
+}
+
+static void show_hw_revision(void)
+{
+ int board;
+
+ /*
+ * Workaround for Rev 0.3 + CP Ver ES 3.1
+ * it's Rev 0.4
+ */
+ if (board_is_limo_real()) {
+ if (hwrevision(0)) {
+ /* default is Rev 0.4 */
+ board_rev &= ~0xf;
+ board_rev |= 0x4;
+ }
+ }
+
+ if (mach_is_goni() || mach_is_aquila())
+ board = bd.bi_arch_number;
+ else if (cpu_is_s5pc110())
+ board = bd.bi_arch_number - C110_MACH_START;
+ else
+ board = bd.bi_arch_number - C100_MACH_START;
+
+ check_board_revision(board, board_rev);
+
+ /* Set CPU Revision */
+ if (mach_is_aquila()) {
+ if (board_is_limo_real()) {
+ if ((board_rev & 0xf) < 8)
+ s5pc1xx_set_cpu_rev(0);
+ }
+ } else if (mach_is_goni()) {
+ if (board_is_sdk() && hwrevision(2))
+ s5pc1xx_set_cpu_rev(2); /* EVT1-Fused */
+ else
+ s5pc1xx_set_cpu_rev(1);
+ } else if (mach_is_geminus()) {
+ if ((board_rev & 0xf) < 1)
+ s5pc1xx_set_cpu_rev(0);
+ } else {
+ s5pc1xx_set_cpu_rev(0);
+ }
+
+ if (cpu_is_s5pc110())
+ writel(0xc1100000 | (0xffff & (s5pc1xx_get_cpu_rev() ? 1 : 0)),
+ S5PC110_INFORM3);
+}
+
+static int check_keypad(void)
+{
+ uint condition = 0;
+ uint reg, value;
+ uint col_num, row_num;
+ uint col_mask;
+ uint col_mask_shift;
+ uint row_state[4] = {0, 0, 0, 0};
+ uint i;
+ int cpu_rev;
+
+ if (cpu_is_s5pc100()) {
+ struct s5pc100_gpio *gpio =
+ (struct s5pc100_gpio *)S5PC100_GPIO_BASE;
+
+ row_num = 3;
+ col_num = 3;
+
+ /* Set GPH2[2:0] to KP_COL[2:0] */
+ gpio_cfg_pin(&gpio->gpio_h2, 0, 0x3);
+ gpio_cfg_pin(&gpio->gpio_h2, 1, 0x3);
+ gpio_cfg_pin(&gpio->gpio_h2, 2, 0x3);
+
+ /* Set GPH3[2:0] to KP_ROW[2:0] */
+ gpio_cfg_pin(&gpio->gpio_h3, 0, 0x3);
+ gpio_cfg_pin(&gpio->gpio_h3, 1, 0x3);
+ gpio_cfg_pin(&gpio->gpio_h3, 2, 0x3);
+
+ reg = S5PC100_KEYPAD_BASE;
+ col_mask = S5PC1XX_KEYIFCOL_MASK;
+ col_mask_shift = 0;
+ } else {
+ struct s5pc110_gpio *gpio =
+ (struct s5pc110_gpio *) S5PC110_GPIO_BASE;
+
+ if (board_is_limo_real() || board_is_limo_universal()) {
+ row_num = 2;
+ col_num = 3;
+ } else {
+ row_num = 4;
+ col_num = 4;
+ }
+
+ for (i = 0; i < row_num; i++) {
+ /* Set GPH3[3:0] to KP_ROW[3:0] */
+ gpio_cfg_pin(&gpio->gpio_h3, i, 0x3);
+ gpio_set_pull(&gpio->gpio_h3, i, GPIO_PULL_UP);
+ }
+
+ for (i = 0; i < col_num; i++)
+ /* Set GPH2[3:0] to KP_COL[3:0] */
+ gpio_cfg_pin(&gpio->gpio_h2, i, 0x3);
+
+ reg = S5PC110_KEYPAD_BASE;
+ col_mask = S5PC110_KEYIFCOLEN_MASK;
+ col_mask_shift = 8;
+ }
+
+ /* KEYIFCOL reg clear */
+ writel(0, reg + S5PC1XX_KEYIFCOL_OFFSET);
+
+ /* key_scan */
+ for (i = 0; i < col_num; i++) {
+ value = col_mask;
+ value &= ~(1 << i) << col_mask_shift;
+
+ writel(value, reg + S5PC1XX_KEYIFCOL_OFFSET);
+ sdelay(1000);
+
+ value = readl(reg + S5PC1XX_KEYIFROW_OFFSET);
+ row_state[i] = ~value & ((1 << row_num) - 1);
+ }
+
+ /* KEYIFCOL reg clear */
+ writel(0, reg + S5PC1XX_KEYIFCOL_OFFSET);
+
+ cpu_rev = s5pc1xx_get_cpu_rev();
+ if (cpu_rev == 1) {
+ if ((row_state[1] & 0x6) == 0x6)
+ condition = 1;
+ } else if (cpu_rev == 2) {
+ if ((row_state[2] & 0x6) == 0x6)
+ condition = 1;
+ } else {
+ if ((row_state[1] & 0x3) == 0x3)
+ condition = 1;
+ }
+
+ return condition;
+}
+
+static int check_block(void)
+{
+ struct onenand_op *onenand_ops = onenand_get_interface();
+ struct mtd_info *mtd = onenand_ops->mtd;
+ struct onenand_chip *this = mtd->priv;
+ int i;
+ int retlen = 0;
+ u32 from = CONFIG_RECOVERY_UBOOT_BLOCK << this->erase_shift;
+ u32 len = 1 << this->erase_shift;
+ u32 *buf = (u32 *)CONFIG_SYS_DOWN_ADDR;
+
+ /* check first page of bootloader*/
+ onenand_ops->read(from, len, (ssize_t *)&retlen, (u_char *)buf, 0);
+ if (retlen != len)
+ return 1;
+
+ for (i = 0; i < (this->writesize / sizeof(this->writesize)); i++)
+ if (*(buf + i) != 0xffffffff)
+ return 0;
+
+ return 1;
+}
+
+int board_check_condition(void)
+{
+ if (check_keypad()) {
+ PUTS("check: manual\n");
+ return 1;
+ }
+
+ if (check_block()) {
+ PUTS("check: bootloader broken\n");
+ return 2;
+ }
+
+ return 0;
+}
+
+int board_load_bootloader(unsigned char *buf)
+{
+ struct mtd_info *mtd = &onenand_mtd;
+ struct onenand_chip *this = mtd->priv;
+ u32 ofs, len, retlen;
+
+ ofs = CONFIG_RECOVERY_UBOOT_BLOCK << this->erase_shift;
+ len = CONFIG_SYS_MONITOR_LEN;
+
+ mtd->read(mtd, ofs, len, &retlen, buf);
+
+ if (len != retlen)
+ return -1;
+
+ return 0;
+}
+
+int board_lock_recoveryblock(void)
+{
+ struct mtd_info *mtd = &onenand_mtd;
+ struct onenand_chip *this = mtd->priv;
+ u32 ofs = 0;
+ u32 len = CONFIG_RECOVERY_UBOOT_BLOCK << this->erase_shift;
+ int ret = 0;
+
+ /* lock-tight the recovery block */
+ if (this->lock_tight != NULL)
+ ret = this->lock_tight(mtd, ofs, len);
+
+ return ret;
+}
+
+void board_update_init(void)
+{
+ struct mtd_info *mtd = &onenand_mtd;
+ struct onenand_chip *this = mtd->priv;
+
+ /* Unlock whole block */
+ this->unlock_all(mtd);
+}
+
+int board_update_image(u32 *buf, u32 len)
+{
+ struct onenand_op *onenand_ops = onenand_get_interface();
+ struct mtd_info *mtd = &onenand_mtd;
+ struct onenand_chip *this = mtd->priv;
+ u32 ofs;
+ u32 ipl_addr = 0;
+ u32 ipl_edge = CONFIG_ONENAND_START_PAGE << this->page_shift;
+ u32 recovery_addr = ipl_edge;
+ u32 recovery_edge = CONFIG_RECOVERY_UBOOT_BLOCK << this->erase_shift;
+ u32 bootloader_addr = recovery_edge;
+ int ret, retlen;
+
+ if (len > bootloader_addr) {
+ if (*(buf + bootloader_addr/sizeof(buf)) == 0xea000012) {
+ /* case: IPL + Recovery + bootloader */
+ PUTS("target: ipl + recovery + bootloader\n");
+ ofs = ipl_addr;
+ /* len = bootloader_edge; */
+ } else {
+ /* case: unknown format */
+ PUTS("target: unknown\n");
+ return 1;
+ }
+ } else {
+ if (*(buf + recovery_addr/sizeof(buf)) == 0xea000012 &&
+ *(buf + recovery_addr/sizeof(buf) - 1) == 0x00000000) {
+ /* case: old image (IPL + bootloader) */
+ PUTS("target: ipl + bootloader (old type)\n");
+ ofs = ipl_addr;
+ /* len = recovery_edge; */
+ } else {
+ /* case: bootloader only */
+ PUTS("target: bootloader\n");
+ ofs = bootloader_addr;
+ /* len = bootloader_edge - recovery_edge; */
+ }
+ }
+
+#ifdef CONFIG_S5PC1XX
+ /* Workaround: for prevent revision mismatch */
+ if (cpu_is_s5pc110() && (ofs == 0)) {
+ int img_rev;
+
+ if (*buf == 0xea000012)
+ img_rev = 0;
+ else if (*(buf + 0x400) == 0xea000012)
+ img_rev = 2;
+ else
+ img_rev = 1;
+
+ if (img_rev != s5pc1xx_get_cpu_rev()) {
+ PUTS("target check: CPU revision mismatch!\n");
+ PUTS("target check: system is ");
+ if (s5pc1xx_get_cpu_rev() == 1)
+ serial_puts("EVT1\n");
+ else if (s5pc1xx_get_cpu_rev() == 2)
+ serial_puts("EVT1-Fused\n");
+ else
+ serial_puts("EVT0\n");
+ PUTS("target check: download image is ");
+ if (img_rev == 1)
+ serial_puts("EVT1\n");
+ else if (img_rev == 2)
+ serial_puts("EVT1-Fused\n");
+ else
+ serial_puts("EVT0\n");
+ PUTS("try again.");
+ return 1;
+ }
+ }
+#endif
+
+ /* Erase */
+ ret = onenand_ops->erase(ofs, len, 0);
+ if (ret)
+ return ret;
+
+ /* Write */
+ onenand_ops->write(ofs, len, (ssize_t *)&retlen, (u_char *)buf);
+ if (ret)
+ return ret;
+
+ return 0;
+}
+
+void board_recovery_init(void)
+{
+ struct s5pc110_gpio *gpio_base =
+ (struct s5pc110_gpio *) S5PC110_GPIO_BASE;
+
+ /* basic arch cpu dependent setup */
+ arch_cpu_init();
+
+ /* Check H/W Revision */
+ check_hw_revision();
+
+ show_hw_revision();
+
+ /* set GPIO to enable UART2 */
+ gpio_cfg_pin(&gpio_base->gpio_a1, 0, 0x2);
+ gpio_cfg_pin(&gpio_base->gpio_a1, 1, 0x2);
+
+ /* UART_SEL MP0_5[7] at S5PC110 */
+ gpio_direction_output(&gpio_base->gpio_mp0_5, 7, 0x1);
+ gpio_set_pull(&gpio_base->gpio_mp0_5, 7, GPIO_PULL_DOWN);
+}
--- /dev/null
+#
+# Copyright (C) 2010 Samsung Electronics
+#
+
+#########################################################################
+
+ifneq ($(OBJTREE),$(SRCTREE))
+ifeq ($(CURDIR),$(SRCTREE))
+dir :=
+else
+dir := $(subst $(SRCTREE)/,,$(CURDIR))
+endif
+
+obj := $(if $(dir),$(OBJTREE)/$(dir)/,$(OBJTREE)/)
+src := $(if $(dir),$(SRCTREE)/$(dir)/,$(SRCTREE)/)
+
+$(shell mkdir -p $(obj))
+else
+obj :=
+src :=
+endif
+
+# clean the slate ...
+PLATFORM_RELFLAGS =
+PLATFORM_CPPFLAGS =
+PLATFORM_LDFLAGS =
+
+#########################################################################
+
+HOSTCFLAGS = -Wall -Wstrict-prototypes -O2 -fomit-frame-pointer \
+ $(HOSTCPPFLAGS)
+HOSTSTRIP = strip
+
+#
+# Mac OS X / Darwin's C preprocessor is Apple specific. It
+# generates numerous errors and warnings. We want to bypass it
+# and use GNU C's cpp. To do this we pass the -traditional-cpp
+# option to the compiler. Note that the -traditional-cpp flag
+# DOES NOT have the same semantics as GNU C's flag, all it does
+# is invoke the GNU preprocessor in stock ANSI/ISO C fashion.
+#
+# Apple's linker is similar, thanks to the new 2 stage linking
+# multiple symbol definitions are treated as errors, hence the
+# -multiply_defined suppress option to turn off this error.
+#
+
+ifeq ($(HOSTOS),darwin)
+HOSTCC = cc
+HOSTCFLAGS += -traditional-cpp
+HOSTLDFLAGS += -multiply_defined suppress
+else
+HOSTCC = gcc
+endif
+
+ifeq ($(HOSTOS),cygwin)
+HOSTCFLAGS += -ansi
+endif
+
+# We build some files with extra pedantic flags to try to minimize things
+# that won't build on some weird host compiler -- though there are lots of
+# exceptions for files that aren't complaint.
+
+HOSTCFLAGS_NOPED = $(filter-out -pedantic,$(HOSTCFLAGS))
+HOSTCFLAGS += -pedantic
+
+#########################################################################
+#
+# Option checker (courtesy linux kernel) to ensure
+# only supported compiler options are used
+#
+cc-option = $(shell if $(CC) $(CFLAGS) $(1) -S -o /dev/null -xc /dev/null \
+ > /dev/null 2>&1; then echo "$(1)"; else echo "$(2)"; fi ;)
+
+#
+# Include the make variables (CC, etc...)
+#
+AS = $(CROSS_COMPILE)as
+LD = $(CROSS_COMPILE)ld
+CC = $(CROSS_COMPILE)gcc
+CPP = $(CC) -E
+AR = $(CROSS_COMPILE)ar
+NM = $(CROSS_COMPILE)nm
+LDR = $(CROSS_COMPILE)ldr
+STRIP = $(CROSS_COMPILE)strip
+OBJCOPY = $(CROSS_COMPILE)objcopy
+OBJDUMP = $(CROSS_COMPILE)objdump
+RANLIB = $(CROSS_COMPILE)RANLIB
+
+#########################################################################
+
+# Load generated board configuration
+sinclude $(OBJTREE)/include/autoconf.mk
+
++# Some architecture config.mk files need to know what CPUDIR is set to,
++# so calculate CPUDIR before including ARCH/SOC/CPU config.mk files.
++# Check if arch/$ARCH/cpu/$CPU exists, otherwise assume arch/$ARCH/cpu contains
++# CPU-specific code.
++CPUDIR=arch/$(ARCH)/cpu/$(CPU)
++ifneq ($(SRCTREE)/$(CPUDIR),$(wildcard $(SRCTREE)/$(CPUDIR)))
++CPUDIR=arch/$(ARCH)/cpu
++endif
++
++sinclude $(TOPDIR)/arch/$(ARCH)/config.mk # include architecture dependend rules
++sinclude $(TOPDIR)/$(CPUDIR)/config.mk # include CPU specific rules
++
++ifdef SOC
++sinclude $(TOPDIR)/$(CPUDIR)/$(SOC)/config.mk # include SoC specific rules
++endif
+ifdef VENDOR
+BOARDDIR = $(VENDOR)/$(BOARD)
+else
+BOARDDIR = $(BOARD)
+endif
+ifdef BOARD
+sinclude $(TOPDIR)/$(RECOVERY_BLOCK)/board/$(BOARDDIR)/config.mk
+endif
+
+#########################################################################
+
+# sinclude $(TOPDIR)/lib_$(ARCH)/config.mk
+
+CROSS_COMPILE ?= arm-linux-
+
+PLATFORM_CPPFLAGS += -DCONFIG_ARM -D__ARM__
+
+# Explicitly specifiy 32-bit ARM ISA since toolchain default can be -mthumb:
+PLATFORM_CPPFLAGS += $(call cc-option,-marm,)
+
+# Try if EABI is supported, else fall back to old API,
+# i. e. for example:
+# - with ELDK 4.2 (EABI supported), use:
+# -mabi=aapcs-linux -mno-thumb-interwork
+# - with ELDK 4.1 (gcc 4.x, no EABI), use:
+# -mabi=apcs-gnu -mno-thumb-interwork
+# - with ELDK 3.1 (gcc 3.x), use:
+# -mapcs-32 -mno-thumb-interwork
+PLATFORM_CPPFLAGS += $(call cc-option,\
+ -mabi=aapcs-linux -mno-thumb-interwork,\
+ $(call cc-option,\
+ -mapcs-32,\
+ $(call cc-option,\
+ -mabi=apcs-gnu,\
+ )\
+ ) $(call cc-option,-mno-thumb-interwork,)\
+ )
+
+# For EABI, make sure to provide raise()
+ifneq (,$(findstring -mabi=aapcs-linux,$(PLATFORM_CPPFLAGS)))
+# This file is parsed several times; make sure to add only once.
+ifeq (,$(findstring lib_arm/eabi_compat.o,$(PLATFORM_LIBS)))
+PLATFORM_LIBS += $(OBJTREE)/lib_arm/eabi_compat.o
+endif
+endif
+LDSCRIPT := $(SRCTREE)/$(RECOVERY_BLOCK)/board/$(BOARDDIR)/recovery.lds
+
+#########################################################################
+
+# sinclude $(TOPDIR)/cpu/$(CPU)/config.mk
+PLATFORM_RELFLAGS += -fno-strict-aliasing -fno-common -ffixed-r8 \
+ -msoft-float
+
+# Make ARMv5 to allow more compilers to work, even though its v7a.
+PLATFORM_CPPFLAGS += -march=armv5
+# =========================================================================
+#
+# Supply options according to compiler version
+#
+# =========================================================================
+PLATFORM_RELFLAGS +=$(call cc-option,-mshort-load-bytes,\
+ $(call cc-option,-malignment-traps,))
+
+#########################################################################
+
+ifneq (,$(findstring s,$(MAKEFLAGS)))
+ARFLAGS = cr
+else
+ARFLAGS = crv
+endif
+RELFLAGS= $(PLATFORM_RELFLAGS)
+DBGFLAGS= -g # -DDEBUG
+OPTFLAGS= -Os #-fomit-frame-pointer
+OBJCFLAGS += --gap-fill=0x00
+
+gccincdir := $(shell $(CC) -print-file-name=include)
+
+CPPFLAGS := $(DBGFLAGS) $(OPTFLAGS) $(RELFLAGS) \
+ -D__KERNEL__
+ifneq ($(TEXT_BASE),)
+CPPFLAGS += -DTEXT_BASE=$(TEXT_BASE)
+endif
+
+ifneq ($(RESET_VECTOR_ADDRESS),)
+CPPFLAGS += -DRESET_VECTOR_ADDRESS=$(RESET_VECTOR_ADDRESS)
+endif
+
+ifneq ($(OBJTREE),$(SRCTREE))
+CPPFLAGS += -I$(OBJTREE)/include2 -I$(OBJTREE)/include
+endif
+
+CPPFLAGS += -I$(TOPDIR)/include
+CPPFLAGS += -fno-builtin -ffreestanding -nostdinc \
+ -isystem $(gccincdir) -pipe $(PLATFORM_CPPFLAGS)
+
+CPPFLAGS += -I$(TOPDIR)/$(RECOVERY_BLOCK)
+CPPFLAGS += -DCONFIG_RECOVERY_BLOCK -D__HAVE_ARCH_MEMCPY32
+CPPFLAGS += -DRECOVERY_DEBUG
+
+ifdef BUILD_TAG
+CFLAGS := $(CPPFLAGS) -Wall -Wstrict-prototypes \
+ -DBUILD_TAG='"$(BUILD_TAG)"'
+else
+CFLAGS := $(CPPFLAGS) -Wall -Wstrict-prototypes
+endif
+
+CFLAGS += $(call cc-option,-fno-stack-protector)
+
+# avoid trigraph warnings while parsing pci.h (produced by NIOS gcc-2.9)
+# this option have to be placed behind -Wall -- that's why it is here
+ifeq ($(ARCH),nios)
+ifeq ($(findstring 2.9,$(shell $(CC) --version)),2.9)
+CFLAGS := $(CPPFLAGS) -Wall -Wno-trigraphs
+endif
+endif
+
+# $(CPPFLAGS) sets -g, which causes gcc to pass a suitable -g<format>
+# option to the assembler.
+AFLAGS_DEBUG :=
+
+# turn jbsr into jsr for m68k
+ifeq ($(ARCH),m68k)
+ifeq ($(findstring 3.4,$(shell $(CC) --version)),3.4)
+AFLAGS_DEBUG := -Wa,-gstabs,-S
+endif
+endif
+
+AFLAGS := $(AFLAGS_DEBUG) -D__ASSEMBLY__ $(CPPFLAGS)
+
+LDFLAGS += -Bstatic -T $(LDSCRIPT) $(PLATFORM_LDFLAGS)
+ifneq ($(TEXT_BASE),)
+LDFLAGS += -Ttext $(TEXT_BASE)
+endif
+
+#########################################################################
+
+export HOSTCC HOSTCFLAGS HOSTLDFLAGS PEDCFLAGS HOSTSTRIP CROSS_COMPILE \
+ AS LD CC CPP AR NM STRIP OBJCOPY OBJDUMP MAKE
+export TEXT_BASE PLATFORM_CPPFLAGS PLATFORM_RELFLAGS CPPFLAGS CFLAGS AFLAGS
+
+#########################################################################
+
+# Allow boards to use custom optimize flags on a per dir/file basis
+BCURDIR := $(notdir $(CURDIR))
+$(obj)%.s: %.S
+ $(CPP) $(AFLAGS) $(AFLAGS_$(@F)) $(AFLAGS_$(BCURDIR)) -o $@ $<
+$(obj)%.o: %.S
+ $(CC) $(AFLAGS) $(AFLAGS_$(@F)) $(AFLAGS_$(BCURDIR)) -o $@ $< -c
+$(obj)%.o: %.c
+ $(CC) $(CFLAGS) $(CFLAGS_$(@F)) $(CFLAGS_$(BCURDIR)) -o $@ $< -c
+$(obj)%.i: %.c
+ $(CPP) $(CFLAGS) $(CFLAGS_$(@F)) $(CFLAGS_$(BCURDIR)) -o $@ $< -c
+$(obj)%.s: %.c
+ $(CC) $(CFLAGS) $(CFLAGS_$(@F)) $(CFLAGS_$(BCURDIR)) -o $@ $< -c -S
+
+#########################################################################
--- /dev/null
- static inline struct s5pc1xx_uart *s5pc1xx_get_base_uart(int dev_index)
+/*
+ * Copyright (C) 2009 Samsung Electronics
+ * Minkyu Kang <mk7.kang@samsung.com>
+ * Heungjun Kim <riverful.kim@samsung.com>
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/uart.h>
+#include <asm/arch/clk.h>
+#include <serial.h>
+
- u32 offset = dev_index * sizeof(struct s5pc1xx_uart);
++static inline struct s5p_uart *s5pc1xx_get_base_uart(int dev_index)
+{
- return (struct s5pc1xx_uart *)(S5PC110_UART_BASE + offset);
++ u32 offset = dev_index * sizeof(struct s5p_uart);
+
- struct s5pc1xx_uart *const uart = s5pc1xx_get_base_uart(dev_index);
++ return (struct s5p_uart *)(S5PC110_UART_BASE + offset);
+}
+
+/*
+ * The coefficient, used to calculate the baudrate on S3C6400 UARTs is
+ * calculated as
+ * C = UBRDIV * 16 + number_of_set_bits_in_UDIVSLOT
+ * however, section 31.6.11 of the datasheet doesn't recomment using 1 for 1,
+ * 3 for 2, ... (2^n - 1) for n, instead, they suggest using these constants:
+ */
+static const int udivslot[] = {
+ 0,
+ 0x0080,
+ 0x0808,
+ 0x0888,
+ 0x2222,
+ 0x4924,
+ 0x4a52,
+ 0x54aa,
+ 0x5555,
+ 0xd555,
+ 0xd5d5,
+ 0xddd5,
+ 0xdddd,
+ 0xdfdd,
+ 0xdfdf,
+ 0xffdf,
+};
+
+void serial_setbrg_dev(const int dev_index)
+{
- struct s5pc1xx_uart *const uart = s5pc1xx_get_base_uart(dev_index);
++ struct s5p_uart *const uart = s5pc1xx_get_base_uart(dev_index);
+
+ /* baudrate: 115200*/
+ writel(0x23, &uart->ubrdiv);
+ writew(udivslot[2], &uart->udivslot);
+}
+
+/*
+ * Initialise the serial port with the given baudrate. The settings
+ * are always 8 data bits, no parity, 1 stop bit, no start bits.
+ */
+int serial_init_dev(const int dev_index)
+{
- struct s5pc1xx_uart *const uart = s5pc1xx_get_base_uart(dev_index);
++ struct s5p_uart *const uart = s5pc1xx_get_base_uart(dev_index);
+
+ /* reset and enable FIFOs, set triggers to the maximum */
+ writel(0, &uart->ufcon);
+ writel(0, &uart->umcon);
+ /* 8N1 */
+ writel(0x3, &uart->ulcon);
+ /* No interrupts, no DMA, pure polling */
+ writel(0x245, &uart->ucon);
+
+ serial_setbrg_dev(dev_index);
+
+ return 0;
+}
+
+static int serial_err_check(const int dev_index, int op)
+{
- struct s5pc1xx_uart *const uart = s5pc1xx_get_base_uart(dev_index);
++ struct s5p_uart *const uart = s5pc1xx_get_base_uart(dev_index);
+ unsigned int mask;
+
+ /*
+ * UERSTAT
+ * Break Detect [3]
+ * Frame Err [2] : receive operation
+ * Parity Err [1] : receive operation
+ * Overrun Err [0] : receive operation
+ */
+ if (op)
+ mask = 0x8;
+ else
+ mask = 0xf;
+
+ return readl(&uart->uerstat) & mask;
+}
+
+/*
+ * Read a single byte from the serial port. Returns 1 on success, 0
+ * otherwise. When the function is succesfull, the character read is
+ * written into its argument c.
+ */
+int serial_getc_dev(const int dev_index)
+{
- struct s5pc1xx_uart *const uart = s5pc1xx_get_base_uart(dev_index);
++ struct s5p_uart *const uart = s5pc1xx_get_base_uart(dev_index);
+
+ /* wait for character to arrive */
+ while (!(readl(&uart->utrstat) & 0x1)) {
+ if (serial_err_check(dev_index, 0))
+ return 0;
+ }
+
+ return (int)(readl(&uart->urxh) & 0xff);
+}
+
+/*
+ * Output a single byte to the serial port.
+ */
+void serial_putc_dev(const char c, const int dev_index)
+{
- struct s5pc1xx_uart *const uart = s5pc1xx_get_base_uart(dev_index);
++ struct s5p_uart *const uart = s5pc1xx_get_base_uart(dev_index);
+
+ /* wait for room in the tx FIFO */
+ while (!(readl(&uart->utrstat) & 0x2)) {
+ if (serial_err_check(dev_index, 1))
+ return;
+ }
+
+ writel(c, &uart->utxh);
+
+ /* If \n, also do \r */
+ if (c == '\n')
+ serial_putc_dev('\r', dev_index);
+}
+
+/*
+ * Test whether a character is in the RX buffer
+ */
+int serial_tstc_dev(const int dev_index)
+{
- struct serial_device s5pc1xx_serial0_device =
++ struct s5p_uart *const uart = s5pc1xx_get_base_uart(dev_index);
+
+ return (int)(readl(&uart->utrstat) & 0x1);
+}
+
+void serial_puts_dev(const char *s, const int dev_index)
+{
+ while (*s)
+ serial_putc_dev(*s++, dev_index);
+}
+
+/* Multi serial device functions */
+#define DECLARE_S5P_SERIAL_FUNCTIONS(port) \
+int s5p_serial##port##_init(void) { return serial_init_dev(port); } \
+void s5p_serial##port##_setbrg(void) { serial_setbrg_dev(port); } \
+int s5p_serial##port##_getc(void) { return serial_getc_dev(port); } \
+int s5p_serial##port##_tstc(void) { return serial_tstc_dev(port); } \
+void s5p_serial##port##_putc(const char c) { serial_putc_dev(c, port); } \
+void s5p_serial##port##_puts(const char *s) { serial_puts_dev(s, port); }
+
+#define INIT_S5P_SERIAL_STRUCTURE(port, name, bus) { \
+ name, \
+ bus, \
+ s5p_serial##port##_init, \
++ NULL, \
+ s5p_serial##port##_setbrg, \
+ s5p_serial##port##_getc, \
+ s5p_serial##port##_tstc, \
+ s5p_serial##port##_putc, \
+ s5p_serial##port##_puts, }
+
+DECLARE_S5P_SERIAL_FUNCTIONS(0);
- struct serial_device s5pc1xx_serial1_device =
++struct serial_device s5p_serial0_device =
+ INIT_S5P_SERIAL_STRUCTURE(0, "s5pser0", "S5PUART0");
+DECLARE_S5P_SERIAL_FUNCTIONS(1);
- struct serial_device s5pc1xx_serial2_device =
++struct serial_device s5p_serial1_device =
+ INIT_S5P_SERIAL_STRUCTURE(1, "s5pser1", "S5PUART1");
+DECLARE_S5P_SERIAL_FUNCTIONS(2);
- struct serial_device s5pc1xx_serial3_device =
++struct serial_device s5p_serial2_device =
+ INIT_S5P_SERIAL_STRUCTURE(2, "s5pser2", "S5PUART2");
+DECLARE_S5P_SERIAL_FUNCTIONS(3);
++struct serial_device s5p_serial3_device =
+ INIT_S5P_SERIAL_STRUCTURE(3, "s5pser3", "S5PUART3");
--- /dev/null
- static struct serial_device *serial_current = &s5pc1xx_serial2_device;
+/*
+ * Copyright (C) 2010 Samsung Electronics
+ * Sanghee Kim <sh0130.kim@samsung.com>
+ */
+
+#include <common.h>
+#include <serial.h>
+
- return &s5pc1xx_serial2_device;
++static struct serial_device *serial_current = &s5p_serial2_device;
+
+struct serial_device *__default_serial_console(void)
+{
++ return &s5p_serial2_device;
+}
+
+struct serial_device *default_serial_console(void)
+ __attribute__((weak, alias("__default_serial_console")));
+
+void serial_putc(const char c)
+{
+ if (!serial_current) {
+ struct serial_device *dev = default_serial_console();
+
+ dev->putc(c);
+ return;
+ }
+
+ serial_current->putc(c);
+}
+
+void serial_puts(const char *s)
+{
+ if (!serial_current) {
+ struct serial_device *dev = default_serial_console();
+
+ dev->puts(s);
+ return;
+ }
+
+ serial_current->puts(s);
+}
+
+int serial_init(void)
+{
+ if (!serial_current) {
+ struct serial_device *dev = default_serial_console();
+
+ return dev->init();
+ }
+
+ return serial_current->init();
+}
projects / kernel / u-boot.git / commitdiff