Staging: USB/IP: add client driver
authorTakahiro Hirofuchi <hirofuchi@users.sourceforge.net>
Wed, 9 Jul 2008 20:56:51 +0000 (14:56 -0600)
committerGreg Kroah-Hartman <gregkh@suse.de>
Fri, 10 Oct 2008 22:31:09 +0000 (15:31 -0700)
This adds the USB IP client driver

Brian Merrell cleaned up a lot of this code and submitted it for
inclusion.  Greg also did a lot of cleanup.

Signed-off-by: Brian G. Merrell <bgmerrell@novell.com>
Cc: Takahiro Hirofuchi <hirofuchi@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
drivers/staging/usbip/Kconfig
drivers/staging/usbip/Makefile
drivers/staging/usbip/vhci.h [new file with mode: 0644]
drivers/staging/usbip/vhci_hcd.c [new file with mode: 0644]
drivers/staging/usbip/vhci_rx.c [new file with mode: 0644]
drivers/staging/usbip/vhci_sysfs.c [new file with mode: 0644]
drivers/staging/usbip/vhci_tx.c [new file with mode: 0644]

index 37efb5e..c4d68e1 100644 (file)
@@ -12,3 +12,14 @@ config USB_IP_COMMON
          module will be called usbip_common_mod.
 
          If unsure, say N.
+
+config USB_IP_VHCI_HCD
+       tristate "USB IP client driver"
+       depends on USB_IP_COMMON
+       default N
+       ---help---
+        This enables the USB IP host controller driver which will
+        run on the client machine.
+
+        To compile this driver as a module, choose M here: the
+        module will be called vhci_hcd.
index ce925ca..6ef4c39 100644 (file)
@@ -1,6 +1,9 @@
 obj-$(CONFIG_USB_IP_COMMON) += usbip_common_mod.o
 usbip_common_mod-objs := usbip_common.o usbip_event.o
 
+obj-$(CONFIG_USB_IP_VHCI_HCD) += vhci-hcd.o
+vhci-hcd-objs := vhci_sysfs.o vhci_tx.o vhci_rx.o vhci_hcd.o
+
 ifeq ($(CONFIG_USB_DEBUG),y)
        EXTRA_CFLAGS += -DDEBUG
 endif
diff --git a/drivers/staging/usbip/vhci.h b/drivers/staging/usbip/vhci.h
new file mode 100644 (file)
index 0000000..5e37517
--- /dev/null
@@ -0,0 +1,142 @@
+/*
+ * Copyright (C) 2003-2008 Takahiro Hirofuchi
+ *
+ * This is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307,
+ * USA.
+ */
+
+#include <linux/platform_device.h>
+#include "../../usb/core/hcd.h"
+
+
+struct vhci_device {
+       struct usb_device *udev;
+
+       /*
+        * devid specifies a remote usb device uniquely instead
+        * of combination of busnum and devnum.
+        */
+       __u32 devid;
+
+       /* speed of a remote device */
+       enum usb_device_speed speed;
+
+       /*  vhci root-hub port to which this device is attached  */
+       __u32 rhport;
+
+       struct usbip_device ud;
+
+
+       /* lock for the below link lists */
+       spinlock_t priv_lock;
+
+       /* vhci_priv is linked to one of them. */
+       struct list_head priv_tx;
+       struct list_head priv_rx;
+
+       /* vhci_unlink is linked to one of them */
+       struct list_head unlink_tx;
+       struct list_head unlink_rx;
+
+       /* vhci_tx thread sleeps for this queue */
+       wait_queue_head_t waitq_tx;
+};
+
+
+/* urb->hcpriv, use container_of() */
+struct vhci_priv {
+       unsigned long seqnum;
+       struct list_head list;
+
+       struct vhci_device *vdev;
+       struct urb *urb;
+};
+
+
+struct vhci_unlink {
+       /* seqnum of this request */
+       unsigned long seqnum;
+
+       struct list_head list;
+
+       /* seqnum of the unlink target */
+       unsigned long unlink_seqnum;
+};
+
+/*
+ * The number of ports is less than 16 ?
+ * USB_MAXCHILDREN is statically defined to 16 in usb.h.  Its maximum value
+ * would be 31 because the event_bits[1] of struct usb_hub is defined as
+ * unsigned long in hub.h
+ */
+#define VHCI_NPORTS 8
+
+/* for usb_bus.hcpriv */
+struct vhci_hcd {
+       spinlock_t      lock;
+
+       u32     port_status[VHCI_NPORTS];
+
+       unsigned        resuming:1;
+       unsigned long   re_timeout;
+
+       atomic_t seqnum;
+
+       /*
+        * NOTE:
+        * wIndex shows the port number and begins from 1.
+        * But, the index of this array begins from 0.
+        */
+       struct vhci_device vdev[VHCI_NPORTS];
+
+       /* vhci_device which has not been assiged its address yet */
+       int pending_port;
+};
+
+
+extern struct vhci_hcd *the_controller;
+extern struct attribute_group dev_attr_group;
+
+
+/*-------------------------------------------------------------------------*/
+/* prototype declaration */
+
+/* vhci_hcd.c */
+void rh_port_connect(int rhport, enum usb_device_speed speed);
+void rh_port_disconnect(int rhport);
+void vhci_rx_loop(struct usbip_task *ut);
+void vhci_tx_loop(struct usbip_task *ut);
+
+#define hardware               (&the_controller->pdev.dev)
+
+static inline struct vhci_device *port_to_vdev(__u32 port)
+{
+       return &the_controller->vdev[port];
+}
+
+static inline struct vhci_hcd *hcd_to_vhci(struct usb_hcd *hcd)
+{
+       return (struct vhci_hcd *) (hcd->hcd_priv);
+}
+
+static inline struct usb_hcd *vhci_to_hcd(struct vhci_hcd *vhci)
+{
+       return container_of((void *) vhci, struct usb_hcd, hcd_priv);
+}
+
+static inline struct device *vhci_dev(struct vhci_hcd *vhci)
+{
+       return vhci_to_hcd(vhci)->self.controller;
+}
diff --git a/drivers/staging/usbip/vhci_hcd.c b/drivers/staging/usbip/vhci_hcd.c
new file mode 100644 (file)
index 0000000..5b5a2e3
--- /dev/null
@@ -0,0 +1,1275 @@
+/*
+ * Copyright (C) 2003-2008 Takahiro Hirofuchi
+ *
+ * This is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307,
+ * USA.
+ */
+
+
+#include "usbip_common.h"
+#include "vhci.h"
+
+#define DRIVER_VERSION "1.0"
+#define DRIVER_AUTHOR "Takahiro Hirofuchi"
+#define DRIVER_DESC "Virtual Host Controller Interface Driver for USB/IP"
+#define DRIVER_LICENCE "GPL"
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE(DRIVER_LICENCE);
+
+
+
+/*
+ * TODO
+ *     - update root hub emulation
+ *     - move the emulation code to userland ?
+ *             porting to other operating systems
+ *             minimize kernel code
+ *     - add suspend/resume code
+ *     - clean up everything
+ */
+
+
+/* See usb gadget dummy hcd */
+
+
+static int vhci_hub_status(struct usb_hcd *hcd, char *buff);
+static int vhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
+               u16 wIndex, char *buff, u16 wLength);
+static int vhci_urb_enqueue(struct usb_hcd *hcd, struct urb *urb,
+                                                       gfp_t mem_flags);
+static int vhci_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status);
+static int vhci_start(struct usb_hcd *vhci_hcd);
+static void vhci_stop(struct usb_hcd *hcd);
+static int vhci_get_frame_number(struct usb_hcd *hcd);
+
+static const char driver_name[] = "vhci_hcd";
+static const char driver_desc[] = "USB/IP Virtual Host Contoroller";
+
+struct vhci_hcd *the_controller;
+
+static const char *bit_desc[] = {
+       "CONNECTION",           /*0*/
+       "ENABLE",               /*1*/
+       "SUSPEND",              /*2*/
+       "OVER_CURRENT",         /*3*/
+       "RESET",                /*4*/
+       "R5",           /*5*/
+       "R6",           /*6*/
+       "R7",           /*7*/
+       "POWER",                /*8*/
+       "LOWSPEED",             /*9*/
+       "HIGHSPEED",            /*10*/
+       "PORT_TEST",            /*11*/
+       "INDICATOR",            /*12*/
+       "R13",          /*13*/
+       "R14",          /*14*/
+       "R15",          /*15*/
+       "C_CONNECTION",         /*16*/
+       "C_ENABLE",             /*17*/
+       "C_SUSPEND",            /*18*/
+       "C_OVER_CURRENT",       /*19*/
+       "C_RESET",              /*20*/
+       "R21",          /*21*/
+       "R22",          /*22*/
+       "R23",          /*23*/
+       "R24",          /*24*/
+       "R25",          /*25*/
+       "R26",          /*26*/
+       "R27",          /*27*/
+       "R28",          /*28*/
+       "R29",          /*29*/
+       "R30",          /*30*/
+       "R31",          /*31*/
+};
+
+
+static void dump_port_status(u32 status)
+{
+       int i = 0;
+
+       printk(KERN_DEBUG "status %08x:", status);
+       for (i = 0; i < 32; i++) {
+               if (status & (1 << i))
+                       printk(" %s", bit_desc[i]);
+       }
+
+       printk("\n");
+}
+
+
+
+void rh_port_connect(int rhport, enum usb_device_speed speed)
+{
+       unsigned long   flags;
+
+       dbg_vhci_rh("rh_port_connect %d\n", rhport);
+
+       spin_lock_irqsave(&the_controller->lock, flags);
+
+       the_controller->port_status[rhport] |= USB_PORT_STAT_CONNECTION
+               | (1 << USB_PORT_FEAT_C_CONNECTION);
+
+       switch (speed) {
+       case USB_SPEED_HIGH:
+               the_controller->port_status[rhport] |= USB_PORT_STAT_HIGH_SPEED;
+               break;
+       case USB_SPEED_LOW:
+               the_controller->port_status[rhport] |= USB_PORT_STAT_LOW_SPEED;
+               break;
+       default:
+               break;
+       }
+
+       /* spin_lock(&the_controller->vdev[rhport].ud.lock);
+        * the_controller->vdev[rhport].ud.status = VDEV_CONNECT;
+        * spin_unlock(&the_controller->vdev[rhport].ud.lock); */
+
+       the_controller->pending_port = rhport;
+
+       spin_unlock_irqrestore(&the_controller->lock, flags);
+
+       usb_hcd_poll_rh_status(vhci_to_hcd(the_controller));
+}
+
+void rh_port_disconnect(int rhport)
+{
+       unsigned long flags;
+
+       dbg_vhci_rh("rh_port_disconnect %d\n", rhport);
+
+       spin_lock_irqsave(&the_controller->lock, flags);
+       /* stop_activity(dum, driver); */
+       the_controller->port_status[rhport] &= ~USB_PORT_STAT_CONNECTION;
+       the_controller->port_status[rhport] |=
+                                       (1 << USB_PORT_FEAT_C_CONNECTION);
+
+
+       /* not yet complete the disconnection
+        * spin_lock(&vdev->ud.lock);
+        * vdev->ud.status = VHC_ST_DISCONNECT;
+        * spin_unlock(&vdev->ud.lock); */
+
+       spin_unlock_irqrestore(&the_controller->lock, flags);
+}
+
+
+
+/*----------------------------------------------------------------------*/
+
+#define PORT_C_MASK \
+       ((USB_PORT_STAT_C_CONNECTION \
+         | USB_PORT_STAT_C_ENABLE \
+         | USB_PORT_STAT_C_SUSPEND \
+         | USB_PORT_STAT_C_OVERCURRENT \
+         | USB_PORT_STAT_C_RESET) << 16)
+
+/*
+ * This function is almostly the same as dummy_hcd.c:dummy_hub_status() without
+ * suspend/resume support. But, it is modified to provide multiple ports.
+ *
+ * @buf: a bitmap to show which port status has been changed.
+ *  bit  0: reserved or used for another purpose?
+ *  bit  1: the status of port 0 has been changed.
+ *  bit  2: the status of port 1 has been changed.
+ *  ...
+ *  bit  7: the status of port 6 has been changed.
+ *  bit  8: the status of port 7 has been changed.
+ *  ...
+ *  bit 15: the status of port 14 has been changed.
+ *
+ * So, the maximum number of ports is 31 ( port 0 to port 30) ?
+ *
+ * The return value is the actual transfered length in byte. If nothing has
+ * been changed, return 0. In the case that the number of ports is less than or
+ * equal to 6 (VHCI_NPORTS==7), return 1.
+ *
+ */
+static int vhci_hub_status(struct usb_hcd *hcd, char *buf)
+{
+       struct vhci_hcd *vhci;
+       unsigned long   flags;
+       int             retval = 0;
+
+       /* the enough buffer is allocated according to USB_MAXCHILDREN */
+       unsigned long   *event_bits = (unsigned long *) buf;
+       int             rhport;
+       int             changed = 0;
+
+
+       *event_bits = 0;
+
+       vhci = hcd_to_vhci(hcd);
+
+       spin_lock_irqsave(&vhci->lock, flags);
+       if (!test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags)) {
+               dbg_vhci_rh("hw accessible flag in on?\n");
+               goto done;
+       }
+
+       /* check pseudo status register for each port */
+       for (rhport = 0; rhport < VHCI_NPORTS; rhport++) {
+               if ((vhci->port_status[rhport] & PORT_C_MASK)) {
+                       /* The status of a port has been changed, */
+                       dbg_vhci_rh("port %d is changed\n", rhport);
+
+                       *event_bits |= 1 << (rhport + 1);
+                       changed = 1;
+               }
+       }
+
+       uinfo("changed %d\n", changed);
+
+       if (hcd->state == HC_STATE_SUSPENDED)
+               usb_hcd_resume_root_hub(hcd);
+
+       if (changed)
+               retval = 1 + (VHCI_NPORTS / 8);
+       else
+               retval = 0;
+
+done:
+       spin_unlock_irqrestore(&vhci->lock, flags);
+       return retval;
+}
+
+/* See hub_configure in hub.c */
+static inline void hub_descriptor(struct usb_hub_descriptor *desc)
+{
+       memset(desc, 0, sizeof(*desc));
+       desc->bDescriptorType = 0x29;
+       desc->bDescLength = 9;
+       desc->wHubCharacteristics = (__force __u16)
+               (__constant_cpu_to_le16(0x0001));
+       desc->bNbrPorts = VHCI_NPORTS;
+       desc->bitmap[0] = 0xff;
+       desc->bitmap[1] = 0xff;
+}
+
+static int vhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
+                           u16 wIndex, char *buf, u16 wLength)
+{
+       struct vhci_hcd *dum;
+       int             retval = 0;
+       unsigned long   flags;
+       int             rhport;
+
+       u32 prev_port_status[VHCI_NPORTS];
+
+       if (!test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags))
+               return -ETIMEDOUT;
+
+       /*
+        * NOTE:
+        * wIndex shows the port number and begins from 1.
+        */
+       dbg_vhci_rh("typeReq %x wValue %x wIndex %x\n", typeReq, wValue,
+                                                               wIndex);
+       if (wIndex > VHCI_NPORTS)
+               printk(KERN_ERR "%s: invalid port number %d\n", __func__, wIndex);
+       rhport = ((__u8)(wIndex & 0x00ff)) - 1;
+
+       dum = hcd_to_vhci(hcd);
+
+       spin_lock_irqsave(&dum->lock, flags);
+
+       /* store old status and compare now and old later */
+       if (dbg_flag_vhci_rh) {
+               int i = 0;
+               for (i = 0; i < VHCI_NPORTS; i++)
+                       prev_port_status[i] = dum->port_status[i];
+       }
+
+       switch (typeReq) {
+       case ClearHubFeature:
+               dbg_vhci_rh(" ClearHubFeature\n");
+               break;
+       case ClearPortFeature:
+               switch (wValue) {
+               case USB_PORT_FEAT_SUSPEND:
+                       if (dum->port_status[rhport] & USB_PORT_STAT_SUSPEND) {
+                               /* 20msec signaling */
+                               dum->resuming = 1;
+                               dum->re_timeout =
+                                       jiffies + msecs_to_jiffies(20);
+                       }
+                       break;
+               case USB_PORT_FEAT_POWER:
+                       dbg_vhci_rh(" ClearPortFeature: USB_PORT_FEAT_POWER\n");
+                       dum->port_status[rhport] = 0;
+                       /* dum->address = 0; */
+                       /* dum->hdev = 0; */
+                       dum->resuming = 0;
+                       break;
+               case USB_PORT_FEAT_C_RESET:
+                       dbg_vhci_rh(" ClearPortFeature: "
+                                       "USB_PORT_FEAT_C_RESET\n");
+                       switch (dum->vdev[rhport].speed) {
+                       case USB_SPEED_HIGH:
+                               dum->port_status[rhport] |=
+                                               USB_PORT_STAT_HIGH_SPEED;
+                               break;
+                       case USB_SPEED_LOW:
+                               dum->port_status[rhport] |=
+                                               USB_PORT_STAT_LOW_SPEED;
+                               break;
+                       default:
+                               break;
+                       }
+               default:
+                       dbg_vhci_rh(" ClearPortFeature: default %x\n", wValue);
+                       dum->port_status[rhport] &= ~(1 << wValue);
+               }
+               break;
+       case GetHubDescriptor:
+               dbg_vhci_rh(" GetHubDescriptor\n");
+               hub_descriptor((struct usb_hub_descriptor *) buf);
+               break;
+       case GetHubStatus:
+               dbg_vhci_rh(" GetHubStatus\n");
+               *(__le32 *) buf = __constant_cpu_to_le32(0);
+               break;
+       case GetPortStatus:
+               dbg_vhci_rh(" GetPortStatus port %x\n", wIndex);
+               if (wIndex > VHCI_NPORTS || wIndex < 1) {
+                       printk(KERN_ERR "%s: invalid port number %d\n",
+                              __func__, wIndex);
+                       retval = -EPIPE;
+               }
+
+               /* we do no care of resume. */
+
+               /* whoever resets or resumes must GetPortStatus to
+                * complete it!!
+                *                                   */
+               if (dum->resuming && time_after(jiffies, dum->re_timeout)) {
+                       printk(KERN_ERR "%s: not yet\n", __func__);
+                       dum->port_status[rhport] |=
+                                       (1 << USB_PORT_FEAT_C_SUSPEND);
+                       dum->port_status[rhport] &=
+                                       ~(1 << USB_PORT_FEAT_SUSPEND);
+                       dum->resuming = 0;
+                       dum->re_timeout = 0;
+                       /* if (dum->driver && dum->driver->resume) {
+                        *      spin_unlock (&dum->lock);
+                        *      dum->driver->resume (&dum->gadget);
+                        *      spin_lock (&dum->lock);
+                        * } */
+               }
+
+               if ((dum->port_status[rhport] & (1 << USB_PORT_FEAT_RESET)) !=
+                               0 && time_after(jiffies, dum->re_timeout)) {
+                       dum->port_status[rhport] |=
+                                               (1 << USB_PORT_FEAT_C_RESET);
+                       dum->port_status[rhport] &=
+                                               ~(1 << USB_PORT_FEAT_RESET);
+                       dum->re_timeout = 0;
+
+                       if (dum->vdev[rhport].ud.status ==
+                                                       VDEV_ST_NOTASSIGNED) {
+                               dbg_vhci_rh(" enable rhport %d (status %u)\n",
+                                               rhport,
+                                               dum->vdev[rhport].ud.status);
+                               dum->port_status[rhport] |=
+                                                       USB_PORT_STAT_ENABLE;
+                       }
+#if 0
+                       if (dum->driver) {
+
+                               dum->port_status[rhport] |=
+                                                       USB_PORT_STAT_ENABLE;
+                               /* give it the best speed we agree on */
+                               dum->gadget.speed = dum->driver->speed;
+                               dum->gadget.ep0->maxpacket = 64;
+                               switch (dum->gadget.speed) {
+                               case USB_SPEED_HIGH:
+                                       dum->port_status[rhport] |=
+                                       USB_PORT_STAT_HIGH_SPEED;
+                                       break;
+                               case USB_SPEED_LOW:
+                                       dum->gadget.ep0->maxpacket = 8;
+                                       dum->port_status[rhport] |=
+                                       USB_PORT_STAT_LOW_SPEED;
+                                       break;
+                               default:
+                                       dum->gadget.speed = USB_SPEED_FULL;
+                                       break;
+                               }
+                       }
+#endif
+
+               }
+               ((u16 *) buf)[0] = cpu_to_le16(dum->port_status[rhport]);
+               ((u16 *) buf)[1] =
+                               cpu_to_le16(dum->port_status[rhport] >> 16);
+
+               dbg_vhci_rh(" GetPortStatus bye %x %x\n", ((u16 *)buf)[0],
+                                                       ((u16 *)buf)[1]);
+               break;
+       case SetHubFeature:
+               dbg_vhci_rh(" SetHubFeature\n");
+               retval = -EPIPE;
+               break;
+       case SetPortFeature:
+               switch (wValue) {
+               case USB_PORT_FEAT_SUSPEND:
+                       dbg_vhci_rh(" SetPortFeature: "
+                                       "USB_PORT_FEAT_SUSPEND\n");
+                       printk(KERN_ERR "%s: not yet\n", __func__);
+#if 0
+                       dum->port_status[rhport] |=
+                                               (1 << USB_PORT_FEAT_SUSPEND);
+                       if (dum->driver->suspend) {
+                               spin_unlock(&dum->lock);
+                               dum->driver->suspend(&dum->gadget);
+                               spin_lock(&dum->lock);
+                       }
+#endif
+                       break;
+               case USB_PORT_FEAT_RESET:
+                       dbg_vhci_rh(" SetPortFeature: USB_PORT_FEAT_RESET\n");
+                       /* if it's already running, disconnect first */
+                       if (dum->port_status[rhport] & USB_PORT_STAT_ENABLE) {
+                               dum->port_status[rhport] &=
+                                               ~(USB_PORT_STAT_ENABLE |
+                                                 USB_PORT_STAT_LOW_SPEED |
+                                                 USB_PORT_STAT_HIGH_SPEED);
+#if 0
+                               if (dum->driver) {
+                                       dev_dbg(hardware, "disconnect\n");
+                                       stop_activity(dum, dum->driver);
+                               }
+#endif
+
+                               /* FIXME test that code path! */
+                       }
+                       /* 50msec reset signaling */
+                       dum->re_timeout = jiffies + msecs_to_jiffies(50);
+
+                       /* FALLTHROUGH */
+               default:
+                       dbg_vhci_rh(" SetPortFeature: default %d\n", wValue);
+                       dum->port_status[rhport] |= (1 << wValue);
+               }
+               break;
+
+       default:
+               printk(KERN_ERR "%s: default: no such request\n", __func__);
+               /* dev_dbg (hardware,
+                *              "hub control req%04x v%04x i%04x l%d\n",
+                *              typeReq, wValue, wIndex, wLength); */
+
+               /* "protocol stall" on error */
+               retval = -EPIPE;
+       }
+
+       if (dbg_flag_vhci_rh) {
+               printk(KERN_DEBUG "port %d\n", rhport);
+               dump_port_status(prev_port_status[rhport]);
+               dump_port_status(dum->port_status[rhport]);
+       }
+       dbg_vhci_rh(" bye\n");
+
+       spin_unlock_irqrestore(&dum->lock, flags);
+
+       return retval;
+}
+
+
+
+/*----------------------------------------------------------------------*/
+
+static struct vhci_device *get_vdev(struct usb_device *udev)
+{
+       int i;
+
+       if (!udev)
+               return NULL;
+
+       for (i = 0; i < VHCI_NPORTS; i++)
+               if (the_controller->vdev[i].udev == udev)
+                       return port_to_vdev(i);
+
+       return NULL;
+}
+
+static void vhci_tx_urb(struct urb *urb)
+{
+       struct vhci_device *vdev = get_vdev(urb->dev);
+       struct vhci_priv *priv;
+       unsigned long flag;
+
+       if (!vdev) {
+               err("could not get virtual device");
+               /* BUG(); */
+               return;
+       }
+
+       spin_lock_irqsave(&vdev->priv_lock, flag);
+
+       priv = kzalloc(sizeof(struct vhci_priv), GFP_ATOMIC);
+       if (!priv) {
+               dev_err(&urb->dev->dev, "malloc vhci_priv\n");
+               spin_unlock_irqrestore(&vdev->priv_lock, flag);
+               usbip_event_add(&vdev->ud, VDEV_EVENT_ERROR_MALLOC);
+               return;
+       }
+
+       priv->seqnum = atomic_inc_return(&the_controller->seqnum);
+       if (priv->seqnum == 0xffff)
+               uinfo("seqnum max\n");
+
+       priv->vdev = vdev;
+       priv->urb = urb;
+
+       urb->hcpriv = (void *) priv;
+
+
+       list_add_tail(&priv->list, &vdev->priv_tx);
+
+       wake_up(&vdev->waitq_tx);
+       spin_unlock_irqrestore(&vdev->priv_lock, flag);
+}
+
+static int vhci_urb_enqueue(struct usb_hcd *hcd, struct urb *urb,
+                           gfp_t mem_flags)
+{
+       struct device *dev = &urb->dev->dev;
+       int ret = 0;
+       unsigned long flags;
+
+       dbg_vhci_hc("enter, usb_hcd %p urb %p mem_flags %d\n",
+                   hcd, urb, mem_flags);
+
+       /* patch to usb_sg_init() is in 2.5.60 */
+       BUG_ON(!urb->transfer_buffer && urb->transfer_buffer_length);
+
+       spin_lock_irqsave(&the_controller->lock, flags);
+
+       /* check HC is active or not */
+       if (!HC_IS_RUNNING(hcd->state)) {
+               dev_err(dev, "HC is not running\n");
+               spin_unlock_irqrestore(&the_controller->lock, flags);
+               return -ENODEV;
+       }
+
+       if (urb->status != -EINPROGRESS) {
+               dev_err(dev, "URB already unlinked!, status %d\n", urb->status);
+               spin_unlock_irqrestore(&the_controller->lock, flags);
+               return urb->status;
+       }
+
+       ret = usb_hcd_link_urb_to_ep(hcd, urb);
+       if (ret)
+               goto no_need_unlink;
+
+       /*
+        * The enumelation process is as follows;
+        *
+        *  1. Get_Descriptor request to DevAddrs(0) EndPoint(0)
+        *     to get max packet length of default pipe
+        *
+        *  2. Set_Address request to DevAddr(0) EndPoint(0)
+        *
+        */
+
+       if (usb_pipedevice(urb->pipe) == 0) {
+               __u8 type = usb_pipetype(urb->pipe);
+               struct usb_ctrlrequest *ctrlreq =
+                               (struct usb_ctrlrequest *) urb->setup_packet;
+               struct vhci_device *vdev =
+                               port_to_vdev(the_controller->pending_port);
+
+               if (type != PIPE_CONTROL || !ctrlreq) {
+                       dev_err(dev, "invalid request to devnum 0\n");
+                       ret = EINVAL;
+                       goto no_need_xmit;
+               }
+
+               switch (ctrlreq->bRequest) {
+               case USB_REQ_SET_ADDRESS:
+                       /* set_address may come when a device is reset */
+                       dev_info(dev, "SetAddress Request (%d) to port %d\n",
+                                ctrlreq->wValue, vdev->rhport);
+
+                       vdev->udev = urb->dev;
+
+                       spin_lock(&vdev->ud.lock);
+                       vdev->ud.status = VDEV_ST_USED;
+                       spin_unlock(&vdev->ud.lock);
+
+                       if (urb->status == -EINPROGRESS) {
+                               /* This request is successfully completed. */
+                               /* If not -EINPROGRESS, possibly unlinked. */
+                               urb->status = 0;
+                       }
+
+                       goto no_need_xmit;
+
+               case USB_REQ_GET_DESCRIPTOR:
+                       if (ctrlreq->wValue == (USB_DT_DEVICE << 8))
+                               dbg_vhci_hc("Not yet?: "
+                                               "Get_Descriptor to device 0 "
+                                               "(get max pipe size)\n");
+
+                       /* FIXME: reference count? (usb_get_dev()) */
+                       vdev->udev = urb->dev;
+                       goto out;
+
+               default:
+                       /* NOT REACHED */
+                       dev_err(dev, "invalid request to devnum 0 bRequest %u, "
+                               "wValue %u\n", ctrlreq->bRequest,
+                               ctrlreq->wValue);
+                       ret =  -EINVAL;
+                       goto no_need_xmit;
+               }
+
+       }
+
+out:
+       vhci_tx_urb(urb);
+
+       spin_unlock_irqrestore(&the_controller->lock, flags);
+
+       return 0;
+
+no_need_xmit:
+       usb_hcd_unlink_urb_from_ep(hcd, urb);
+no_need_unlink:
+       spin_unlock_irqrestore(&the_controller->lock, flags);
+
+       usb_hcd_giveback_urb(vhci_to_hcd(the_controller), urb, urb->status);
+
+       return 0;
+}
+
+/*
+ * vhci_rx gives back the urb after receiving the reply of the urb.  If an
+ * unlink pdu is sent or not, vhci_rx receives a normal return pdu and gives
+ * back its urb. For the driver unlinking the urb, the content of the urb is
+ * not important, but the calling to its completion handler is important; the
+ * completion of unlinking is notified by the completion handler.
+ *
+ *
+ * CLIENT SIDE
+ *
+ * - When vhci_hcd receives RET_SUBMIT,
+ *
+ *     - case 1a). the urb of the pdu is not unlinking.
+ *             - normal case
+ *             => just give back the urb
+ *
+ *     - case 1b). the urb of the pdu is unlinking.
+ *             - usbip.ko will return a reply of the unlinking request.
+ *             => give back the urb now and go to case 2b).
+ *
+ * - When vhci_hcd receives RET_UNLINK,
+ *
+ *     - case 2a). a submit request is still pending in vhci_hcd.
+ *             - urb was really pending in usbip.ko and urb_unlink_urb() was
+ *               completed there.
+ *             => free a pending submit request
+ *             => notify unlink completeness by giving back the urb
+ *
+ *     - case 2b). a submit request is *not* pending in vhci_hcd.
+ *             - urb was already given back to the core driver.
+ *             => do not give back the urb
+ *
+ *
+ * SERVER SIDE
+ *
+ * - When usbip receives CMD_UNLINK,
+ *
+ *     - case 3a). the urb of the unlink request is now in submission.
+ *             => do usb_unlink_urb().
+ *             => after the unlink is completed, send RET_UNLINK.
+ *
+ *     - case 3b). the urb of the unlink request is not in submission.
+ *             - may be already completed or never be received
+ *             => send RET_UNLINK
+ *
+ */
+static int vhci_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status)
+{
+       unsigned long flags;
+       struct vhci_priv *priv;
+       struct vhci_device *vdev;
+
+       uinfo("vhci_hcd: dequeue a urb %p\n", urb);
+
+
+       spin_lock_irqsave(&the_controller->lock, flags);
+
+       priv = urb->hcpriv;
+       if (!priv) {
+               /* URB was never linked! or will be soon given back by
+                * vhci_rx. */
+               spin_unlock_irqrestore(&the_controller->lock, flags);
+               return 0;
+       }
+
+       {
+               int ret = 0;
+               ret = usb_hcd_check_unlink_urb(hcd, urb, status);
+               if (ret) {
+                       spin_unlock_irqrestore(&the_controller->lock, flags);
+                       return 0;
+               }
+       }
+
+        /* send unlink request here? */
+       vdev = priv->vdev;
+
+       if (!vdev->ud.tcp_socket) {
+               /* tcp connection is closed */
+               unsigned long flags2;
+
+               spin_lock_irqsave(&vdev->priv_lock, flags2);
+
+               uinfo("vhci_hcd: device %p seems to be disconnected\n", vdev);
+               list_del(&priv->list);
+               kfree(priv);
+               urb->hcpriv = NULL;
+
+               spin_unlock_irqrestore(&vdev->priv_lock, flags2);
+
+       } else {
+               /* tcp connection is alive */
+               unsigned long flags2;
+               struct vhci_unlink *unlink;
+
+               spin_lock_irqsave(&vdev->priv_lock, flags2);
+
+               /* setup CMD_UNLINK pdu */
+               unlink = kzalloc(sizeof(struct vhci_unlink), GFP_ATOMIC);
+               if (!unlink) {
+                       uerr("malloc vhci_unlink\n");
+                       spin_unlock_irqrestore(&vdev->priv_lock, flags2);
+                       spin_unlock_irqrestore(&the_controller->lock, flags);
+                       usbip_event_add(&vdev->ud, VDEV_EVENT_ERROR_MALLOC);
+                       return -ENOMEM;
+               }
+
+               unlink->seqnum = atomic_inc_return(&the_controller->seqnum);
+               if (unlink->seqnum == 0xffff)
+                       uinfo("seqnum max\n");
+
+               unlink->unlink_seqnum = priv->seqnum;
+
+               uinfo("vhci_hcd: device %p seems to be still connected\n",
+                                                                       vdev);
+
+               /* send cmd_unlink and try to cancel the pending URB in the
+                * peer */
+               list_add_tail(&unlink->list, &vdev->unlink_tx);
+               wake_up(&vdev->waitq_tx);
+
+               spin_unlock_irqrestore(&vdev->priv_lock, flags2);
+       }
+
+
+       /*
+        * If tcp connection is alive, we have sent CMD_UNLINK.
+        * vhci_rx will receive RET_UNLINK and give back the URB.
+        * Otherwise, we give back it here.
+        */
+       if (!vdev->ud.tcp_socket) {
+               /* tcp connection is closed */
+               uinfo("vhci_hcd: vhci_urb_dequeue() gives back urb %p\n", urb);
+
+               usb_hcd_unlink_urb_from_ep(hcd, urb);
+
+               spin_unlock_irqrestore(&the_controller->lock, flags);
+               usb_hcd_giveback_urb(vhci_to_hcd(the_controller), urb,
+                                                               urb->status);
+               spin_lock_irqsave(&the_controller->lock, flags);
+       }
+
+       spin_unlock_irqrestore(&the_controller->lock, flags);
+
+       dbg_vhci_hc("leave\n");
+       return 0;
+}
+
+
+static void vhci_device_unlink_cleanup(struct vhci_device *vdev)
+{
+       struct vhci_unlink *unlink, *tmp;
+
+       spin_lock(&vdev->priv_lock);
+
+       list_for_each_entry_safe(unlink, tmp, &vdev->unlink_tx, list) {
+               list_del(&unlink->list);
+               kfree(unlink);
+       }
+
+       list_for_each_entry_safe(unlink, tmp, &vdev->unlink_rx, list) {
+               list_del(&unlink->list);
+               kfree(unlink);
+       }
+
+       spin_unlock(&vdev->priv_lock);
+}
+
+/*
+ * The important thing is that only one context begins cleanup.
+ * This is why error handling and cleanup become simple.
+ * We do not want to consider race condition as possible.
+ */
+static void vhci_shutdown_connection(struct usbip_device *ud)
+{
+       struct vhci_device *vdev = container_of(ud, struct vhci_device, ud);
+
+       /* need this? see stub_dev.c */
+       if (ud->tcp_socket) {
+               udbg("shutdown tcp_socket %p\n", ud->tcp_socket);
+               kernel_sock_shutdown(ud->tcp_socket, SHUT_RDWR);
+       }
+
+       usbip_stop_threads(&vdev->ud);
+       uinfo("stop threads\n");
+
+       /* active connection is closed */
+       if (vdev->ud.tcp_socket != NULL) {
+               sock_release(vdev->ud.tcp_socket);
+               vdev->ud.tcp_socket = NULL;
+       }
+       uinfo("release socket\n");
+
+       vhci_device_unlink_cleanup(vdev);
+
+       /*
+        * rh_port_disconnect() is a trigger of ...
+        *   usb_disable_device():
+        *      disable all the endpoints for a USB device.
+        *   usb_disable_endpoint():
+        *      disable endpoints. pending urbs are unlinked(dequeued).
+        *
+        * NOTE: After calling rh_port_disconnect(), the USB device drivers of a
+        * deteched device should release used urbs in a cleanup function(i.e.
+        * xxx_disconnect()). Therefore, vhci_hcd does not need to release
+        * pushed urbs and their private data in this function.
+        *
+        * NOTE: vhci_dequeue() must be considered carefully. When shutdowning
+        * a connection, vhci_shutdown_connection() expects vhci_dequeue()
+        * gives back pushed urbs and frees their private data by request of
+        * the cleanup function of a USB driver. When unlinking a urb with an
+        * active connection, vhci_dequeue() does not give back the urb which
+        * is actually given back by vhci_rx after receiving its return pdu.
+        *
+        */
+       rh_port_disconnect(vdev->rhport);
+
+       uinfo("disconnect device\n");
+}
+
+
+static void vhci_device_reset(struct usbip_device *ud)
+{
+       struct vhci_device *vdev = container_of(ud, struct vhci_device, ud);
+
+       spin_lock(&ud->lock);
+
+       vdev->speed  = 0;
+       vdev->devid  = 0;
+
+       ud->tcp_socket = NULL;
+
+       ud->status = VDEV_ST_NULL;
+
+       spin_unlock(&ud->lock);
+}
+
+static void vhci_device_unusable(struct usbip_device *ud)
+{
+       spin_lock(&ud->lock);
+
+       ud->status = VDEV_ST_ERROR;
+
+       spin_unlock(&ud->lock);
+}
+
+static void vhci_device_init(struct vhci_device *vdev)
+{
+       memset(vdev, 0, sizeof(*vdev));
+
+       usbip_task_init(&vdev->ud.tcp_rx, "vhci_rx", vhci_rx_loop);
+       usbip_task_init(&vdev->ud.tcp_tx, "vhci_tx", vhci_tx_loop);
+
+       vdev->ud.side   = USBIP_VHCI;
+       vdev->ud.status = VDEV_ST_NULL;
+       /* vdev->ud.lock   = SPIN_LOCK_UNLOCKED; */
+       spin_lock_init(&vdev->ud.lock);
+
+       INIT_LIST_HEAD(&vdev->priv_rx);
+       INIT_LIST_HEAD(&vdev->priv_tx);
+       INIT_LIST_HEAD(&vdev->unlink_tx);
+       INIT_LIST_HEAD(&vdev->unlink_rx);
+       /* vdev->priv_lock = SPIN_LOCK_UNLOCKED; */
+       spin_lock_init(&vdev->priv_lock);
+
+       init_waitqueue_head(&vdev->waitq_tx);
+
+       vdev->ud.eh_ops.shutdown = vhci_shutdown_connection;
+       vdev->ud.eh_ops.reset = vhci_device_reset;
+       vdev->ud.eh_ops.unusable = vhci_device_unusable;
+
+       usbip_start_eh(&vdev->ud);
+}
+
+
+/*----------------------------------------------------------------------*/
+
+static int vhci_start(struct usb_hcd *hcd)
+{
+       struct vhci_hcd *vhci = hcd_to_vhci(hcd);
+       int rhport;
+       int err = 0;
+
+       dbg_vhci_hc("enter vhci_start\n");
+
+
+       /* initialize private data of usb_hcd */
+
+       for (rhport = 0; rhport < VHCI_NPORTS; rhport++) {
+               struct vhci_device *vdev = &vhci->vdev[rhport];
+               vhci_device_init(vdev);
+               vdev->rhport = rhport;
+       }
+
+       atomic_set(&vhci->seqnum, 0);
+       spin_lock_init(&vhci->lock);
+
+
+
+       hcd->power_budget = 0; /* no limit */
+       hcd->state  = HC_STATE_RUNNING;
+       hcd->uses_new_polling = 1;
+
+
+       /* vhci_hcd is now ready to be controlled through sysfs */
+       err = sysfs_create_group(&vhci_dev(vhci)->kobj, &dev_attr_group);
+       if (err) {
+               uerr("create sysfs files\n");
+               return err;
+       }
+
+       return 0;
+}
+
+static void vhci_stop(struct usb_hcd *hcd)
+{
+       struct vhci_hcd *vhci = hcd_to_vhci(hcd);
+       int rhport = 0;
+
+       dbg_vhci_hc("stop VHCI controller\n");
+
+
+       /* 1. remove the userland interface of vhci_hcd */
+       sysfs_remove_group(&vhci_dev(vhci)->kobj, &dev_attr_group);
+
+       /* 2. shutdown all the ports of vhci_hcd */
+       for (rhport = 0 ; rhport < VHCI_NPORTS; rhport++) {
+               struct vhci_device *vdev = &vhci->vdev[rhport];
+
+               usbip_event_add(&vdev->ud, VDEV_EVENT_REMOVED);
+               usbip_stop_eh(&vdev->ud);
+       }
+
+
+       uinfo("vhci_stop done\n");
+}
+
+/*----------------------------------------------------------------------*/
+
+static int vhci_get_frame_number(struct usb_hcd *hcd)
+{
+       uerr("Not yet implemented\n");
+       return 0;
+}
+
+
+#ifdef CONFIG_PM
+
+/* FIXME: suspend/resume */
+static int vhci_bus_suspend(struct usb_hcd *hcd)
+{
+       struct vhci_hcd *vhci = hcd_to_vhci(hcd);
+
+       dev_dbg(&hcd->self.root_hub->dev, "%s\n", __func__);
+
+       spin_lock_irq(&vhci->lock);
+       /* vhci->rh_state = DUMMY_RH_SUSPENDED;
+        * set_link_state(vhci); */
+       hcd->state = HC_STATE_SUSPENDED;
+       spin_unlock_irq(&vhci->lock);
+
+       return 0;
+}
+
+static int vhci_bus_resume(struct usb_hcd *hcd)
+{
+       struct vhci_hcd *vhci = hcd_to_vhci(hcd);
+       int rc = 0;
+
+       dev_dbg(&hcd->self.root_hub->dev, "%s\n", __func__);
+
+       spin_lock_irq(&vhci->lock);
+       if (!test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags)) {
+               rc = -ESHUTDOWN;
+       } else {
+               /* vhci->rh_state = DUMMY_RH_RUNNING;
+                * set_link_state(vhci);
+                * if (!list_empty(&vhci->urbp_list))
+                *      mod_timer(&vhci->timer, jiffies); */
+               hcd->state = HC_STATE_RUNNING;
+       }
+       spin_unlock_irq(&vhci->lock);
+       return rc;
+
+       return 0;
+}
+
+#else
+
+#define vhci_bus_suspend      NULL
+#define vhci_bus_resume       NULL
+#endif
+
+
+
+static struct hc_driver vhci_hc_driver = {
+       .description    = driver_name,
+       .product_desc   = driver_desc,
+       .hcd_priv_size  = sizeof(struct vhci_hcd),
+
+       .flags          = HCD_USB2,
+
+       .start          = vhci_start,
+       .stop           = vhci_stop,
+
+       .urb_enqueue    = vhci_urb_enqueue,
+       .urb_dequeue    = vhci_urb_dequeue,
+
+       .get_frame_number = vhci_get_frame_number,
+
+       .hub_status_data = vhci_hub_status,
+       .hub_control    = vhci_hub_control,
+       .bus_suspend    = vhci_bus_suspend,
+       .bus_resume     = vhci_bus_resume,
+};
+
+static int vhci_hcd_probe(struct platform_device *pdev)
+{
+       struct usb_hcd          *hcd;
+       int                     ret;
+
+       uinfo("proving...\n");
+
+       dbg_vhci_hc("name %s id %d\n", pdev->name, pdev->id);
+
+       /* will be removed */
+       if (pdev->dev.dma_mask) {
+               dev_info(&pdev->dev, "vhci_hcd DMA not supported\n");
+               return -EINVAL;
+       }
+
+       /*
+        * Allocate and initialize hcd.
+        * Our private data is also allocated automatically.
+        */
+       hcd = usb_create_hcd(&vhci_hc_driver, &pdev->dev, pdev->dev.bus_id);
+       if (!hcd) {
+               uerr("create hcd failed\n");
+               return -ENOMEM;
+       }
+
+
+       /* this is private data for vhci_hcd */
+       the_controller = hcd_to_vhci(hcd);
+
+       /*
+        * Finish generic HCD structure initialization and register.
+        * Call the driver's reset() and start() routines.
+        */
+       ret = usb_add_hcd(hcd, 0, 0);
+       if (ret != 0) {
+               uerr("usb_add_hcd failed %d\n", ret);
+               usb_put_hcd(hcd);
+               the_controller = NULL;
+               return ret;
+       }
+
+
+       dbg_vhci_hc("bye\n");
+       return 0;
+}
+
+
+static int vhci_hcd_remove(struct platform_device *pdev)
+{
+       struct usb_hcd  *hcd;
+
+       hcd = platform_get_drvdata(pdev);
+       if (!hcd)
+               return 0;
+
+       /*
+        * Disconnects the root hub,
+        * then reverses the effects of usb_add_hcd(),
+        * invoking the HCD's stop() methods.
+        */
+       usb_remove_hcd(hcd);
+       usb_put_hcd(hcd);
+       the_controller = NULL;
+
+
+       return 0;
+}
+
+
+
+#ifdef CONFIG_PM
+
+/* what should happen for USB/IP under suspend/resume? */
+static int vhci_hcd_suspend(struct platform_device *pdev, pm_message_t state)
+{
+       struct usb_hcd *hcd;
+       int rhport = 0;
+       int connected = 0;
+       int ret = 0;
+
+       dev_dbg(&pdev->dev, "%s\n", __func__);
+
+       hcd = platform_get_drvdata(pdev);
+
+       spin_lock(&the_controller->lock);
+
+       for (rhport = 0; rhport < VHCI_NPORTS; rhport++)
+               if (the_controller->port_status[rhport] &
+                                               USB_PORT_STAT_CONNECTION)
+                       connected += 1;
+
+       spin_unlock(&the_controller->lock);
+
+       if (connected > 0) {
+               uinfo("We have %d active connection%s. Do not suspend.\n",
+                               connected, (connected == 1 ? "" : "s"));
+               ret =  -EBUSY;
+       } else {
+               uinfo("suspend vhci_hcd");
+               clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
+       }
+
+       return ret;
+}
+
+static int vhci_hcd_resume(struct platform_device *pdev)
+{
+       struct usb_hcd *hcd;
+
+       dev_dbg(&pdev->dev, "%s\n", __func__);
+
+       hcd = platform_get_drvdata(pdev);
+       set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
+       usb_hcd_poll_rh_status(hcd);
+
+       return 0;
+}
+
+#else
+
+#define vhci_hcd_suspend       NULL
+#define vhci_hcd_resume                NULL
+
+#endif
+
+
+static struct platform_driver vhci_driver = {
+       .probe  = vhci_hcd_probe,
+       .remove = __devexit_p(vhci_hcd_remove),
+       .suspend = vhci_hcd_suspend,
+       .resume = vhci_hcd_resume,
+       .driver = {
+               .name = (char *) driver_name,
+               .owner = THIS_MODULE,
+       },
+};
+
+/*----------------------------------------------------------------------*/
+
+/*
+ * The VHCI 'device' is 'virtual'; not a real plug&play hardware.
+ * We need to add this virtual device as a platform device arbitrarily:
+ *     1. platform_device_register()
+ */
+static void the_pdev_release(struct device *dev)
+{
+       return;
+}
+
+static struct platform_device the_pdev = {
+       /* should be the same name as driver_name */
+       .name = (char *) driver_name,
+       .id = -1,
+       .dev = {
+               /* .driver = &vhci_driver, */
+               .release = the_pdev_release,
+       },
+};
+
+static int __init vhci_init(void)
+{
+       int ret;
+
+       dbg_vhci_hc("enter\n");
+       if (usb_disabled())
+               return -ENODEV;
+
+       printk(KERN_INFO KBUILD_MODNAME ": %s, %s\n", driver_name,
+              DRIVER_VERSION);
+
+       ret = platform_driver_register(&vhci_driver);
+       if (ret < 0)
+               goto err_driver_register;
+
+       ret = platform_device_register(&the_pdev);
+       if (ret < 0)
+               goto err_platform_device_register;
+
+       dbg_vhci_hc("bye\n");
+       return ret;
+
+       /* error occurred */
+err_platform_device_register:
+       platform_driver_unregister(&vhci_driver);
+
+err_driver_register:
+       dbg_vhci_hc("bye\n");
+       return ret;
+}
+module_init(vhci_init);
+
+static void __exit vhci_cleanup(void)
+{
+       dbg_vhci_hc("enter\n");
+
+       platform_device_unregister(&the_pdev);
+       platform_driver_unregister(&vhci_driver);
+
+       dbg_vhci_hc("bye\n");
+}
+module_exit(vhci_cleanup);
diff --git a/drivers/staging/usbip/vhci_rx.c b/drivers/staging/usbip/vhci_rx.c
new file mode 100644 (file)
index 0000000..933ccaf
--- /dev/null
@@ -0,0 +1,251 @@
+/*
+ * Copyright (C) 2003-2008 Takahiro Hirofuchi
+ *
+ * This is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307,
+ * USA.
+ */
+
+#include "usbip_common.h"
+#include "vhci.h"
+
+
+/* get URB from transmitted urb queue */
+static struct urb *pickup_urb_and_free_priv(struct vhci_device *vdev,
+                                           __u32 seqnum)
+{
+       struct vhci_priv *priv, *tmp;
+       struct urb *urb = NULL;
+       int status;
+
+       spin_lock(&vdev->priv_lock);
+
+       list_for_each_entry_safe(priv, tmp, &vdev->priv_rx, list) {
+               if (priv->seqnum == seqnum) {
+                       urb = priv->urb;
+                       status = urb->status;
+
+                       dbg_vhci_rx("find urb %p vurb %p seqnum %u\n",
+                                   urb, priv, seqnum);
+
+                       /* TODO: fix logic here to improve indent situtation */
+                       if (status != -EINPROGRESS) {
+                               if (status == -ENOENT ||
+                                    status == -ECONNRESET)
+                                       dev_info(&urb->dev->dev,
+                                                "urb %p was unlinked "
+                                                "%ssynchronuously.\n", urb,
+                                                status == -ENOENT ? "" : "a");
+                               else
+                                       dev_info(&urb->dev->dev,
+                                                "urb %p may be in a error, "
+                                                "status %d\n", urb, status);
+                       }
+
+                       list_del(&priv->list);
+                       kfree(priv);
+                       urb->hcpriv = NULL;
+
+                       break;
+               }
+       }
+
+       spin_unlock(&vdev->priv_lock);
+
+       return urb;
+}
+
+static void vhci_recv_ret_submit(struct vhci_device *vdev,
+                                               struct usbip_header *pdu)
+{
+       struct usbip_device *ud = &vdev->ud;
+       struct urb *urb;
+
+
+       urb = pickup_urb_and_free_priv(vdev, pdu->base.seqnum);
+
+
+       if (!urb) {
+               uerr("cannot find a urb of seqnum %u\n", pdu->base.seqnum);
+               uinfo("max seqnum %d\n", atomic_read(&the_controller->seqnum));
+               usbip_event_add(ud, VDEV_EVENT_ERROR_TCP);
+               return;
+       }
+
+
+       /* unpack the pdu to a urb */
+       usbip_pack_pdu(pdu, urb, USBIP_RET_SUBMIT, 0);
+
+
+       /* recv transfer buffer */
+       if (usbip_recv_xbuff(ud, urb) < 0)
+               return;
+
+
+       /* recv iso_packet_descriptor */
+       if (usbip_recv_iso(ud, urb) < 0)
+               return;
+
+
+       if (dbg_flag_vhci_rx)
+               usbip_dump_urb(urb);
+
+
+       dbg_vhci_rx("now giveback urb %p\n", urb);
+
+       spin_lock(&the_controller->lock);
+       usb_hcd_unlink_urb_from_ep(vhci_to_hcd(the_controller), urb);
+       spin_unlock(&the_controller->lock);
+
+       usb_hcd_giveback_urb(vhci_to_hcd(the_controller), urb, urb->status);
+
+
+       dbg_vhci_rx("Leave\n");
+
+       return;
+}
+
+
+static struct vhci_unlink *dequeue_pending_unlink(struct vhci_device *vdev,
+               struct usbip_header *pdu)
+{
+       struct vhci_unlink *unlink, *tmp;
+
+       spin_lock(&vdev->priv_lock);
+
+       list_for_each_entry_safe(unlink, tmp, &vdev->unlink_rx, list) {
+               uinfo("unlink->seqnum %lu\n", unlink->seqnum);
+               if (unlink->seqnum == pdu->base.seqnum) {
+                       dbg_vhci_rx("found pending unlink, %lu\n",
+                                                       unlink->seqnum);
+                       list_del(&unlink->list);
+
+                       spin_unlock(&vdev->priv_lock);
+                       return unlink;
+               }
+       }
+
+       spin_unlock(&vdev->priv_lock);
+
+       return NULL;
+}
+
+
+static void vhci_recv_ret_unlink(struct vhci_device *vdev,
+                                               struct usbip_header *pdu)
+{
+       struct vhci_unlink *unlink;
+       struct urb *urb;
+
+       usbip_dump_header(pdu);
+
+       unlink = dequeue_pending_unlink(vdev, pdu);
+       if (!unlink) {
+               uinfo("cannot find the pending unlink %u\n", pdu->base.seqnum);
+               return;
+       }
+
+       urb = pickup_urb_and_free_priv(vdev, unlink->unlink_seqnum);
+       if (!urb) {
+               /*
+                * I get the result of a unlink request. But, it seems that I
+                * already received the result of its submit result and gave
+                * back the URB.
+                */
+               uinfo("the urb (seqnum %d) was already given backed\n",
+                                                       pdu->base.seqnum);
+       } else {
+               dbg_vhci_rx("now giveback urb %p\n", urb);
+
+               /* If unlink is succeed, status is -ECONNRESET */
+               urb->status = pdu->u.ret_unlink.status;
+               uinfo("%d\n", urb->status);
+
+               spin_lock(&the_controller->lock);
+               usb_hcd_unlink_urb_from_ep(vhci_to_hcd(the_controller), urb);
+               spin_unlock(&the_controller->lock);
+
+               usb_hcd_giveback_urb(vhci_to_hcd(the_controller), urb,
+                                                               urb->status);
+       }
+
+       kfree(unlink);
+
+       return;
+}
+
+/* recv a pdu */
+static void vhci_rx_pdu(struct usbip_device *ud)
+{
+       int ret;
+       struct usbip_header pdu;
+       struct vhci_device *vdev = container_of(ud, struct vhci_device, ud);
+
+
+       dbg_vhci_rx("Enter\n");
+
+       memset(&pdu, 0, sizeof(pdu));
+
+
+       /* 1. receive a pdu header */
+       ret = usbip_xmit(0, ud->tcp_socket, (char *) &pdu, sizeof(pdu), 0);
+       if (ret != sizeof(pdu)) {
+               uerr("receiving pdu failed! size is %d, should be %d\n",
+                               ret, sizeof(pdu));
+               usbip_event_add(ud, VDEV_EVENT_ERROR_TCP);
+               return;
+       }
+
+       usbip_header_correct_endian(&pdu, 0);
+
+       if (dbg_flag_vhci_rx)
+               usbip_dump_header(&pdu);
+
+       switch (pdu.base.command) {
+       case USBIP_RET_SUBMIT:
+               vhci_recv_ret_submit(vdev, &pdu);
+               break;
+       case USBIP_RET_UNLINK:
+               vhci_recv_ret_unlink(vdev, &pdu);
+               break;
+       default:
+               /* NOTREACHED */
+               uerr("unknown pdu %u\n", pdu.base.command);
+               usbip_dump_header(&pdu);
+               usbip_event_add(ud, VDEV_EVENT_ERROR_TCP);
+       }
+}
+
+
+/*-------------------------------------------------------------------------*/
+
+void vhci_rx_loop(struct usbip_task *ut)
+{
+       struct usbip_device *ud = container_of(ut, struct usbip_device, tcp_rx);
+
+
+       while (1) {
+               if (signal_pending(current)) {
+                       dbg_vhci_rx("signal catched!\n");
+                       break;
+               }
+
+
+               if (usbip_event_happend(ud))
+                       break;
+
+               vhci_rx_pdu(ud);
+       }
+}
+
diff --git a/drivers/staging/usbip/vhci_sysfs.c b/drivers/staging/usbip/vhci_sysfs.c
new file mode 100644 (file)
index 0000000..24c2851
--- /dev/null
@@ -0,0 +1,250 @@
+/*
+ * Copyright (C) 2003-2008 Takahiro Hirofuchi
+ *
+ * This is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307,
+ * USA.
+ */
+
+#include "usbip_common.h"
+#include "vhci.h"
+
+#include <linux/in.h>
+
+/* TODO: refine locking ?*/
+
+/* Sysfs entry to show port status */
+static ssize_t show_status(struct device *dev, struct device_attribute *attr,
+                          char *out)
+{
+       char *s = out;
+       int i = 0;
+
+       if (!the_controller || !out)
+               BUG();
+
+       spin_lock(&the_controller->lock);
+
+       /*
+        * output example:
+        * prt sta spd dev socket           local_busid
+        * 000 004 000 000         c5a7bb80 1-2.3
+        * 001 004 000 000         d8cee980 2-3.4
+        *
+        * IP address can be retrieved from a socket pointer address by looking
+        * up /proc/net/{tcp,tcp6}. Also, a userland program may remember a
+        * port number and its peer IP address.
+        */
+       out += sprintf(out, "prt sta spd bus dev socket           "
+                      "local_busid\n");
+
+       for (i = 0; i < VHCI_NPORTS; i++) {
+               struct vhci_device *vdev = port_to_vdev(i);
+
+               spin_lock(&vdev->ud.lock);
+
+               out += sprintf(out, "%03u %03u ", i, vdev->ud.status);
+
+               if (vdev->ud.status == VDEV_ST_USED) {
+                       out += sprintf(out, "%03u %08x ",
+                                       vdev->speed, vdev->devid);
+                       out += sprintf(out, "%16p ", vdev->ud.tcp_socket);
+                       out += sprintf(out, "%s", vdev->udev->dev.bus_id);
+
+               } else
+                       out += sprintf(out, "000 000 000 0000000000000000 0-0");
+
+               out += sprintf(out, "\n");
+
+               spin_unlock(&vdev->ud.lock);
+       }
+
+       spin_unlock(&the_controller->lock);
+
+       return out - s;
+}
+static DEVICE_ATTR(status, S_IRUGO, show_status, NULL);
+
+/* Sysfs entry to shutdown a virtual connection */
+static int vhci_port_disconnect(__u32 rhport)
+{
+       struct vhci_device *vdev;
+
+       dbg_vhci_sysfs("enter\n");
+
+       /* lock */
+       spin_lock(&the_controller->lock);
+
+       vdev = port_to_vdev(rhport);
+
+       spin_lock(&vdev->ud.lock);
+       if (vdev->ud.status == VDEV_ST_NULL) {
+               uerr("not connected %d\n", vdev->ud.status);
+
+               /* unlock */
+               spin_unlock(&vdev->ud.lock);
+               spin_unlock(&the_controller->lock);
+
+               return -EINVAL;
+       }
+
+       /* unlock */
+       spin_unlock(&vdev->ud.lock);
+       spin_unlock(&the_controller->lock);
+
+       usbip_event_add(&vdev->ud, VDEV_EVENT_DOWN);
+
+       return 0;
+}
+
+static ssize_t store_detach(struct device *dev, struct device_attribute *attr,
+                           const char *buf, size_t count)
+{
+       int err;
+       __u32 rhport = 0;
+
+       sscanf(buf, "%u", &rhport);
+
+       /* check rhport */
+       if (rhport >= VHCI_NPORTS) {
+               uerr("invalid port %u\n", rhport);
+               return -EINVAL;
+       }
+
+       err = vhci_port_disconnect(rhport);
+       if (err < 0)
+               return -EINVAL;
+
+       dbg_vhci_sysfs("Leave\n");
+       return count;
+}
+static DEVICE_ATTR(detach, S_IWUSR, NULL, store_detach);
+
+/* Sysfs entry to establish a virtual connection */
+static int valid_args(__u32 rhport, enum usb_device_speed speed)
+{
+       /* check rhport */
+       if ((rhport < 0) || (rhport >= VHCI_NPORTS)) {
+               uerr("port %u\n", rhport);
+               return -EINVAL;
+       }
+
+       /* check speed */
+       switch (speed) {
+       case USB_SPEED_LOW:
+       case USB_SPEED_FULL:
+       case USB_SPEED_HIGH:
+       case USB_SPEED_VARIABLE:
+               break;
+       default:
+               uerr("speed %d\n", speed);
+               return -EINVAL;
+       }
+
+       return 0;
+}
+
+/*
+ * To start a new USB/IP attachment, a userland program needs to setup a TCP
+ * connection and then write its socket descriptor with remote device
+ * information into this sysfs file.
+ *
+ * A remote device is virtually attached to the root-hub port of @rhport with
+ * @speed. @devid is embedded into a request to specify the remote device in a
+ * server host.
+ *
+ * write() returns 0 on success, else negative errno.
+ */
+static ssize_t store_attach(struct device *dev, struct device_attribute *attr,
+                           const char *buf, size_t count)
+{
+       struct vhci_device *vdev;
+       struct socket *socket;
+       int sockfd = 0;
+       __u32 rhport = 0, devid = 0, speed = 0;
+
+       /*
+        * @rhport: port number of vhci_hcd
+        * @sockfd: socket descriptor of an established TCP connection
+        * @devid: unique device identifier in a remote host
+        * @speed: usb device speed in a remote host
+        */
+       sscanf(buf, "%u %u %u %u", &rhport, &sockfd, &devid, &speed);
+
+       dbg_vhci_sysfs("rhport(%u) sockfd(%u) devid(%u) speed(%u)\n",
+                       rhport, sockfd, devid, speed);
+
+
+       /* check received parameters */
+       if (valid_args(rhport, speed) < 0)
+               return -EINVAL;
+
+       /* check sockfd */
+       socket = sockfd_to_socket(sockfd);
+       if (!socket)
+               return  -EINVAL;
+
+       /* now need lock until setting vdev status as used */
+
+       /* begin a lock */
+       spin_lock(&the_controller->lock);
+
+       vdev = port_to_vdev(rhport);
+
+       spin_lock(&vdev->ud.lock);
+
+       if (vdev->ud.status != VDEV_ST_NULL) {
+               /* end of the lock */
+               spin_unlock(&vdev->ud.lock);
+               spin_unlock(&the_controller->lock);
+
+               uerr("port %d already used\n", rhport);
+               return -EINVAL;
+       }
+
+       uinfo("rhport(%u) sockfd(%d) devid(%u) speed(%u)\n",
+                       rhport, sockfd, devid, speed);
+
+       vdev->devid         = devid;
+       vdev->speed         = speed;
+       vdev->ud.tcp_socket = socket;
+       vdev->ud.status     = VDEV_ST_NOTASSIGNED;
+
+       spin_unlock(&vdev->ud.lock);
+       spin_unlock(&the_controller->lock);
+       /* end the lock */
+
+       /*
+        * this function will sleep, so should be out of the lock. but, it's ok
+        * because we already marked vdev as being used. really?
+        */
+       usbip_start_threads(&vdev->ud);
+
+       rh_port_connect(rhport, speed);
+
+       return count;
+}
+static DEVICE_ATTR(attach, S_IWUSR, NULL, store_attach);
+
+static struct attribute *dev_attrs[] = {
+       &dev_attr_status.attr,
+       &dev_attr_detach.attr,
+       &dev_attr_attach.attr,
+       &dev_attr_usbip_debug.attr,
+       NULL,
+};
+
+struct attribute_group dev_attr_group = {
+       .attrs = dev_attrs,
+};
diff --git a/drivers/staging/usbip/vhci_tx.c b/drivers/staging/usbip/vhci_tx.c
new file mode 100644 (file)
index 0000000..1f552a9
--- /dev/null
@@ -0,0 +1,239 @@
+/*
+ * Copyright (C) 2003-2008 Takahiro Hirofuchi
+ *
+ * This is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307,
+ * USA.
+ */
+
+#include "usbip_common.h"
+#include "vhci.h"
+
+
+static void setup_cmd_submit_pdu(struct usbip_header *pdup,  struct urb *urb)
+{
+       struct vhci_priv *priv = ((struct vhci_priv *)urb->hcpriv);
+       struct vhci_device *vdev = priv->vdev;
+
+       dbg_vhci_tx("URB, local devnum %u, remote devid %u\n",
+                               usb_pipedevice(urb->pipe), vdev->devid);
+
+       pdup->base.command = USBIP_CMD_SUBMIT;
+       pdup->base.seqnum  = priv->seqnum;
+       pdup->base.devid   = vdev->devid;
+       if (usb_pipein(urb->pipe))
+               pdup->base.direction = USBIP_DIR_IN;
+       else
+               pdup->base.direction = USBIP_DIR_OUT;
+       pdup->base.ep      = usb_pipeendpoint(urb->pipe);
+
+       usbip_pack_pdu(pdup, urb, USBIP_CMD_SUBMIT, 1);
+
+       if (urb->setup_packet)
+               memcpy(pdup->u.cmd_submit.setup, urb->setup_packet, 8);
+}
+
+static struct vhci_priv *dequeue_from_priv_tx(struct vhci_device *vdev)
+{
+       unsigned long flags;
+       struct vhci_priv *priv, *tmp;
+
+       spin_lock_irqsave(&vdev->priv_lock, flags);
+
+       list_for_each_entry_safe(priv, tmp, &vdev->priv_tx, list) {
+               list_move_tail(&priv->list, &vdev->priv_rx);
+               spin_unlock_irqrestore(&vdev->priv_lock, flags);
+               return priv;
+       }
+
+       spin_unlock_irqrestore(&vdev->priv_lock, flags);
+
+       return NULL;
+}
+
+
+
+static int vhci_send_cmd_submit(struct vhci_device *vdev)
+{
+       struct vhci_priv *priv = NULL;
+
+       struct msghdr msg;
+       struct kvec iov[3];
+       size_t txsize;
+
+       size_t total_size = 0;
+
+       while ((priv = dequeue_from_priv_tx(vdev)) != NULL) {
+               int ret;
+               struct urb *urb = priv->urb;
+               struct usbip_header pdu_header;
+               void *iso_buffer = NULL;
+
+               txsize = 0;
+               memset(&pdu_header, 0, sizeof(pdu_header));
+               memset(&msg, 0, sizeof(msg));
+               memset(&iov, 0, sizeof(iov));
+
+               dbg_vhci_tx("setup txdata urb %p\n", urb);
+
+
+               /* 1. setup usbip_header */
+               setup_cmd_submit_pdu(&pdu_header, urb);
+               usbip_header_correct_endian(&pdu_header, 1);
+
+               iov[0].iov_base = &pdu_header;
+               iov[0].iov_len  = sizeof(pdu_header);
+               txsize += sizeof(pdu_header);
+
+               /* 2. setup transfer buffer */
+               if (!usb_pipein(urb->pipe) && urb->transfer_buffer_length > 0) {
+                       iov[1].iov_base = urb->transfer_buffer;
+                       iov[1].iov_len  = urb->transfer_buffer_length;
+                       txsize += urb->transfer_buffer_length;
+               }
+
+               /* 3. setup iso_packet_descriptor */
+               if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) {
+                       ssize_t len = 0;
+
+                       iso_buffer = usbip_alloc_iso_desc_pdu(urb, &len);
+                       if (!iso_buffer) {
+                               usbip_event_add(&vdev->ud,
+                                               SDEV_EVENT_ERROR_MALLOC);
+                               return -1;
+                       }
+
+                       iov[2].iov_base = iso_buffer;
+                       iov[2].iov_len  = len;
+                       txsize += len;
+               }
+
+               ret = kernel_sendmsg(vdev->ud.tcp_socket, &msg, iov, 3, txsize);
+               if (ret != txsize) {
+                       uerr("sendmsg failed!, retval %d for %zd\n", ret,
+                                                               txsize);
+                       kfree(iso_buffer);
+                       usbip_event_add(&vdev->ud, VDEV_EVENT_ERROR_TCP);
+                       return -1;
+               }
+
+               kfree(iso_buffer);
+               dbg_vhci_tx("send txdata\n");
+
+               total_size += txsize;
+       }
+
+       return total_size;
+}
+
+
+/*-------------------------------------------------------------------------*/
+
+static struct vhci_unlink *dequeue_from_unlink_tx(struct vhci_device *vdev)
+{
+       unsigned long flags;
+       struct vhci_unlink *unlink, *tmp;
+
+       spin_lock_irqsave(&vdev->priv_lock, flags);
+
+       list_for_each_entry_safe(unlink, tmp, &vdev->unlink_tx, list) {
+               list_move_tail(&unlink->list, &vdev->unlink_rx);
+               spin_unlock_irqrestore(&vdev->priv_lock, flags);
+               return unlink;
+       }
+
+       spin_unlock_irqrestore(&vdev->priv_lock, flags);
+
+       return NULL;
+}
+
+static int vhci_send_cmd_unlink(struct vhci_device *vdev)
+{
+       struct vhci_unlink *unlink = NULL;
+
+       struct msghdr msg;
+       struct kvec iov[3];
+       size_t txsize;
+
+       size_t total_size = 0;
+
+       while ((unlink = dequeue_from_unlink_tx(vdev)) != NULL) {
+               int ret;
+               struct usbip_header pdu_header;
+
+               txsize = 0;
+               memset(&pdu_header, 0, sizeof(pdu_header));
+               memset(&msg, 0, sizeof(msg));
+               memset(&iov, 0, sizeof(iov));
+
+               dbg_vhci_tx("setup cmd unlink, %lu \n", unlink->seqnum);
+
+
+               /* 1. setup usbip_header */
+               pdu_header.base.command = USBIP_CMD_UNLINK;
+               pdu_header.base.seqnum  = unlink->seqnum;
+               pdu_header.base.devid   = vdev->devid;
+               pdu_header.base.ep      = 0;
+               pdu_header.u.cmd_unlink.seqnum = unlink->unlink_seqnum;
+
+               usbip_header_correct_endian(&pdu_header, 1);
+
+               iov[0].iov_base = &pdu_header;
+               iov[0].iov_len  = sizeof(pdu_header);
+               txsize += sizeof(pdu_header);
+
+               ret = kernel_sendmsg(vdev->ud.tcp_socket, &msg, iov, 1, txsize);
+               if (ret != txsize) {
+                       uerr("sendmsg failed!, retval %d for %zd\n", ret,
+                                                               txsize);
+                       usbip_event_add(&vdev->ud, VDEV_EVENT_ERROR_TCP);
+                       return -1;
+               }
+
+
+               dbg_vhci_tx("send txdata\n");
+
+               total_size += txsize;
+       }
+
+       return total_size;
+}
+
+
+/*-------------------------------------------------------------------------*/
+
+void vhci_tx_loop(struct usbip_task *ut)
+{
+       struct usbip_device *ud = container_of(ut, struct usbip_device, tcp_tx);
+       struct vhci_device *vdev = container_of(ud, struct vhci_device, ud);
+
+       while (1) {
+               if (signal_pending(current)) {
+                       uinfo("vhci_tx signal catched\n");
+                       break;
+               }
+
+               if (vhci_send_cmd_submit(vdev) < 0)
+                       break;
+
+               if (vhci_send_cmd_unlink(vdev) < 0)
+                       break;
+
+               wait_event_interruptible(vdev->waitq_tx,
+                               (!list_empty(&vdev->priv_tx) ||
+                                !list_empty(&vdev->unlink_tx)));
+
+               dbg_vhci_tx("pending urbs ?, now wake up\n");
+       }
+}