CONFIG_VIDEO_ADV7343=m
CONFIG_DRM=m
CONFIG_DRM_TILCDC=m
-CONFIG_DRM_DUMB_VGA_DAC=m
+CONFIG_DRM_SIMPLE_BRIDGE=m
CONFIG_DRM_TINYDRM=m
CONFIG_TINYDRM_ST7586=m
CONFIG_FB=y
# CONFIG_KEYBOARD_ATKBD is not set
# CONFIG_SERIO_SERPORT is not set
CONFIG_DRM=y
-CONFIG_DRM_DUMB_VGA_DAC=y
+CONFIG_DRM_SIMPLE_BRIDGE=y
CONFIG_DRM_PL111=y
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_MATROX=y
CONFIG_DRM_PANEL_RAYDIUM_RM68200=m
CONFIG_DRM_PANEL_SAMSUNG_S6E63J0X03=m
CONFIG_DRM_PANEL_SAMSUNG_S6E8AA0=m
-CONFIG_DRM_DUMB_VGA_DAC=m
CONFIG_DRM_NXP_PTN3460=m
CONFIG_DRM_PARADE_PS8622=m
CONFIG_DRM_SII902X=m
CONFIG_DRM_SII9234=m
+CONFIG_DRM_SIMPLE_BRIDGE=m
CONFIG_DRM_TOSHIBA_TC358764=m
CONFIG_DRM_I2C_ADV7511=m
CONFIG_DRM_I2C_ADV7511_AUDIO=y
CONFIG_DRM=y
CONFIG_DRM_RCAR_DU=y
CONFIG_DRM_PANEL_SIMPLE=y
-CONFIG_DRM_DUMB_VGA_DAC=y
CONFIG_DRM_LVDS_CODEC=y
CONFIG_DRM_SII902X=y
+CONFIG_DRM_SIMPLE_BRIDGE=y
CONFIG_DRM_I2C_ADV7511=y
CONFIG_DRM_I2C_ADV7511_AUDIO=y
CONFIG_FB_SH_MOBILE_LCDC=y
CONFIG_IR_SUNXI=y
CONFIG_DRM=y
CONFIG_DRM_SUN4I=y
-CONFIG_DRM_DUMB_VGA_DAC=y
+CONFIG_DRM_SIMPLE_BRIDGE=y
CONFIG_FB_SIMPLE=y
CONFIG_SOUND=y
CONFIG_SND=y
CONFIG_DRM=y
CONFIG_DRM_PANEL_ARM_VERSATILE=y
CONFIG_DRM_PANEL_SIMPLE=y
-CONFIG_DRM_DUMB_VGA_DAC=y
+CONFIG_DRM_SIMPLE_BRIDGE=y
CONFIG_DRM_PL111=y
CONFIG_FB_MODE_HELPERS=y
CONFIG_BACKLIGHT_CLASS_DEVICE=y
Support Cadence DPI to DSI bridge. This is an internal
bridge and is meant to be directly embedded in a SoC.
-config DRM_DUMB_VGA_DAC
- tristate "Dumb VGA DAC Bridge support"
- depends on OF
- select DRM_KMS_HELPER
- help
- Support for non-programmable RGB to VGA DAC bridges, such as ADI
- ADV7123, TI THS8134 and THS8135 or passive resistor ladder DACs.
-
config DRM_LVDS_CODEC
tristate "Transparent LVDS encoders and decoders support"
depends on OF
It is an I2C driver, that detects connection of MHL bridge
and starts encapsulation of HDMI signal.
+config DRM_SIMPLE_BRIDGE
+ tristate "Simple DRM bridge support"
+ depends on OF
+ select DRM_KMS_HELPER
+ help
+ Support for non-programmable DRM bridges, such as ADI ADV7123, TI
+ THS8134 and THS8135 or passive resistor ladder DACs.
+
config DRM_THINE_THC63LVD1024
tristate "Thine THC63LVD1024 LVDS decoder bridge"
depends on OF
# SPDX-License-Identifier: GPL-2.0
obj-$(CONFIG_DRM_CDNS_DSI) += cdns-dsi.o
-obj-$(CONFIG_DRM_DUMB_VGA_DAC) += dumb-vga-dac.o
obj-$(CONFIG_DRM_LVDS_CODEC) += lvds-codec.o
obj-$(CONFIG_DRM_MEGACHIPS_STDPXXXX_GE_B850V3_FW) += megachips-stdpxxxx-ge-b850v3-fw.o
obj-$(CONFIG_DRM_NXP_PTN3460) += nxp-ptn3460.o
obj-$(CONFIG_DRM_SIL_SII8620) += sil-sii8620.o
obj-$(CONFIG_DRM_SII902X) += sii902x.o
obj-$(CONFIG_DRM_SII9234) += sii9234.o
+obj-$(CONFIG_DRM_SIMPLE_BRIDGE) += simple-bridge.o
obj-$(CONFIG_DRM_THINE_THC63LVD1024) += thc63lvd1024.o
obj-$(CONFIG_DRM_TOSHIBA_TC358764) += tc358764.o
obj-$(CONFIG_DRM_TOSHIBA_TC358767) += tc358767.o
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright (C) 2015-2016 Free Electrons
- * Copyright (C) 2015-2016 NextThing Co
- *
- * Maxime Ripard <maxime.ripard@free-electrons.com>
- */
-
-#include <linux/module.h>
-#include <linux/of_device.h>
-#include <linux/of_graph.h>
-#include <linux/regulator/consumer.h>
-
-#include <drm/drm_atomic_helper.h>
-#include <drm/drm_bridge.h>
-#include <drm/drm_crtc.h>
-#include <drm/drm_print.h>
-#include <drm/drm_probe_helper.h>
-
-struct simple_bridge {
- struct drm_bridge bridge;
- struct drm_connector connector;
-
- struct i2c_adapter *ddc;
- struct regulator *vdd;
-};
-
-static inline struct simple_bridge *
-drm_bridge_to_simple_bridge(struct drm_bridge *bridge)
-{
- return container_of(bridge, struct simple_bridge, bridge);
-}
-
-static inline struct simple_bridge *
-drm_connector_to_simple_bridge(struct drm_connector *connector)
-{
- return container_of(connector, struct simple_bridge, connector);
-}
-
-static int simple_bridge_get_modes(struct drm_connector *connector)
-{
- struct simple_bridge *sbridge = drm_connector_to_simple_bridge(connector);
- struct edid *edid;
- int ret;
-
- if (!sbridge->ddc)
- goto fallback;
-
- edid = drm_get_edid(connector, sbridge->ddc);
- if (!edid) {
- DRM_INFO("EDID readout failed, falling back to standard modes\n");
- goto fallback;
- }
-
- drm_connector_update_edid_property(connector, edid);
- ret = drm_add_edid_modes(connector, edid);
- kfree(edid);
- return ret;
-
-fallback:
- /*
- * In case we cannot retrieve the EDIDs (broken or missing i2c
- * bus), fallback on the XGA standards
- */
- ret = drm_add_modes_noedid(connector, 1920, 1200);
-
- /* And prefer a mode pretty much anyone can handle */
- drm_set_preferred_mode(connector, 1024, 768);
-
- return ret;
-}
-
-static const struct drm_connector_helper_funcs simple_bridge_con_helper_funcs = {
- .get_modes = simple_bridge_get_modes,
-};
-
-static enum drm_connector_status
-simple_bridge_connector_detect(struct drm_connector *connector, bool force)
-{
- struct simple_bridge *sbridge = drm_connector_to_simple_bridge(connector);
-
- /*
- * Even if we have an I2C bus, we can't assume that the cable
- * is disconnected if drm_probe_ddc fails. Some cables don't
- * wire the DDC pins, or the I2C bus might not be working at
- * all.
- */
- if (sbridge->ddc && drm_probe_ddc(sbridge->ddc))
- return connector_status_connected;
-
- return connector_status_unknown;
-}
-
-static const struct drm_connector_funcs simple_bridge_con_funcs = {
- .detect = simple_bridge_connector_detect,
- .fill_modes = drm_helper_probe_single_connector_modes,
- .destroy = drm_connector_cleanup,
- .reset = drm_atomic_helper_connector_reset,
- .atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state,
- .atomic_destroy_state = drm_atomic_helper_connector_destroy_state,
-};
-
-static int simple_bridge_attach(struct drm_bridge *bridge,
- enum drm_bridge_attach_flags flags)
-{
- struct simple_bridge *sbridge = drm_bridge_to_simple_bridge(bridge);
- int ret;
-
- if (flags & DRM_BRIDGE_ATTACH_NO_CONNECTOR) {
- DRM_ERROR("Fix bridge driver to make connector optional!");
- return -EINVAL;
- }
-
- if (!bridge->encoder) {
- DRM_ERROR("Missing encoder\n");
- return -ENODEV;
- }
-
- drm_connector_helper_add(&sbridge->connector,
- &simple_bridge_con_helper_funcs);
- ret = drm_connector_init_with_ddc(bridge->dev, &sbridge->connector,
- &simple_bridge_con_funcs,
- DRM_MODE_CONNECTOR_VGA,
- sbridge->ddc);
- if (ret) {
- DRM_ERROR("Failed to initialize connector\n");
- return ret;
- }
-
- drm_connector_attach_encoder(&sbridge->connector,
- bridge->encoder);
-
- return 0;
-}
-
-static void simple_bridge_enable(struct drm_bridge *bridge)
-{
- struct simple_bridge *sbridge = drm_bridge_to_simple_bridge(bridge);
- int ret = 0;
-
- if (sbridge->vdd)
- ret = regulator_enable(sbridge->vdd);
-
- if (ret)
- DRM_ERROR("Failed to enable vdd regulator: %d\n", ret);
-}
-
-static void simple_bridge_disable(struct drm_bridge *bridge)
-{
- struct simple_bridge *sbridge = drm_bridge_to_simple_bridge(bridge);
-
- if (sbridge->vdd)
- regulator_disable(sbridge->vdd);
-}
-
-static const struct drm_bridge_funcs simple_bridge_bridge_funcs = {
- .attach = simple_bridge_attach,
- .enable = simple_bridge_enable,
- .disable = simple_bridge_disable,
-};
-
-static struct i2c_adapter *simple_bridge_retrieve_ddc(struct device *dev)
-{
- struct device_node *phandle, *remote;
- struct i2c_adapter *ddc;
-
- remote = of_graph_get_remote_node(dev->of_node, 1, -1);
- if (!remote)
- return ERR_PTR(-EINVAL);
-
- phandle = of_parse_phandle(remote, "ddc-i2c-bus", 0);
- of_node_put(remote);
- if (!phandle)
- return ERR_PTR(-ENODEV);
-
- ddc = of_get_i2c_adapter_by_node(phandle);
- of_node_put(phandle);
- if (!ddc)
- return ERR_PTR(-EPROBE_DEFER);
-
- return ddc;
-}
-
-static int simple_bridge_probe(struct platform_device *pdev)
-{
- struct simple_bridge *sbridge;
-
- sbridge = devm_kzalloc(&pdev->dev, sizeof(*sbridge), GFP_KERNEL);
- if (!sbridge)
- return -ENOMEM;
- platform_set_drvdata(pdev, sbridge);
-
- sbridge->vdd = devm_regulator_get_optional(&pdev->dev, "vdd");
- if (IS_ERR(sbridge->vdd)) {
- int ret = PTR_ERR(sbridge->vdd);
- if (ret == -EPROBE_DEFER)
- return -EPROBE_DEFER;
- sbridge->vdd = NULL;
- dev_dbg(&pdev->dev, "No vdd regulator found: %d\n", ret);
- }
-
- sbridge->ddc = simple_bridge_retrieve_ddc(&pdev->dev);
- if (IS_ERR(sbridge->ddc)) {
- if (PTR_ERR(sbridge->ddc) == -ENODEV) {
- dev_dbg(&pdev->dev,
- "No i2c bus specified. Disabling EDID readout\n");
- sbridge->ddc = NULL;
- } else {
- dev_err(&pdev->dev, "Couldn't retrieve i2c bus\n");
- return PTR_ERR(sbridge->ddc);
- }
- }
-
- sbridge->bridge.funcs = &simple_bridge_bridge_funcs;
- sbridge->bridge.of_node = pdev->dev.of_node;
- sbridge->bridge.timings = of_device_get_match_data(&pdev->dev);
-
- drm_bridge_add(&sbridge->bridge);
-
- return 0;
-}
-
-static int simple_bridge_remove(struct platform_device *pdev)
-{
- struct simple_bridge *sbridge = platform_get_drvdata(pdev);
-
- drm_bridge_remove(&sbridge->bridge);
-
- if (sbridge->ddc)
- i2c_put_adapter(sbridge->ddc);
-
- return 0;
-}
-
-/*
- * We assume the ADV7123 DAC is the "default" for historical reasons
- * Information taken from the ADV7123 datasheet, revision D.
- * NOTE: the ADV7123EP seems to have other timings and need a new timings
- * set if used.
- */
-static const struct drm_bridge_timings default_bridge_timings = {
- /* Timing specifications, datasheet page 7 */
- .input_bus_flags = DRM_BUS_FLAG_PIXDATA_SAMPLE_POSEDGE,
- .setup_time_ps = 500,
- .hold_time_ps = 1500,
-};
-
-/*
- * Information taken from the THS8134, THS8134A, THS8134B datasheet named
- * "SLVS205D", dated May 1990, revised March 2000.
- */
-static const struct drm_bridge_timings ti_ths8134_bridge_timings = {
- /* From timing diagram, datasheet page 9 */
- .input_bus_flags = DRM_BUS_FLAG_PIXDATA_SAMPLE_POSEDGE,
- /* From datasheet, page 12 */
- .setup_time_ps = 3000,
- /* I guess this means latched input */
- .hold_time_ps = 0,
-};
-
-/*
- * Information taken from the THS8135 datasheet named "SLAS343B", dated
- * May 2001, revised April 2013.
- */
-static const struct drm_bridge_timings ti_ths8135_bridge_timings = {
- /* From timing diagram, datasheet page 14 */
- .input_bus_flags = DRM_BUS_FLAG_PIXDATA_SAMPLE_POSEDGE,
- /* From datasheet, page 16 */
- .setup_time_ps = 2000,
- .hold_time_ps = 500,
-};
-
-static const struct of_device_id simple_bridge_match[] = {
- {
- .compatible = "dumb-vga-dac",
- .data = NULL,
- },
- {
- .compatible = "adi,adv7123",
- .data = &default_bridge_timings,
- },
- {
- .compatible = "ti,ths8135",
- .data = &ti_ths8135_bridge_timings,
- },
- {
- .compatible = "ti,ths8134",
- .data = &ti_ths8134_bridge_timings,
- },
- {},
-};
-MODULE_DEVICE_TABLE(of, simple_bridge_match);
-
-static struct platform_driver simple_bridge_driver = {
- .probe = simple_bridge_probe,
- .remove = simple_bridge_remove,
- .driver = {
- .name = "dumb-vga-dac",
- .of_match_table = simple_bridge_match,
- },
-};
-module_platform_driver(simple_bridge_driver);
-
-MODULE_AUTHOR("Maxime Ripard <maxime.ripard@free-electrons.com>");
-MODULE_DESCRIPTION("Simple DRM bridge driver");
-MODULE_LICENSE("GPL");
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (C) 2015-2016 Free Electrons
+ * Copyright (C) 2015-2016 NextThing Co
+ *
+ * Maxime Ripard <maxime.ripard@free-electrons.com>
+ */
+
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/of_graph.h>
+#include <linux/regulator/consumer.h>
+
+#include <drm/drm_atomic_helper.h>
+#include <drm/drm_bridge.h>
+#include <drm/drm_crtc.h>
+#include <drm/drm_print.h>
+#include <drm/drm_probe_helper.h>
+
+struct simple_bridge {
+ struct drm_bridge bridge;
+ struct drm_connector connector;
+
+ struct i2c_adapter *ddc;
+ struct regulator *vdd;
+};
+
+static inline struct simple_bridge *
+drm_bridge_to_simple_bridge(struct drm_bridge *bridge)
+{
+ return container_of(bridge, struct simple_bridge, bridge);
+}
+
+static inline struct simple_bridge *
+drm_connector_to_simple_bridge(struct drm_connector *connector)
+{
+ return container_of(connector, struct simple_bridge, connector);
+}
+
+static int simple_bridge_get_modes(struct drm_connector *connector)
+{
+ struct simple_bridge *sbridge = drm_connector_to_simple_bridge(connector);
+ struct edid *edid;
+ int ret;
+
+ if (!sbridge->ddc)
+ goto fallback;
+
+ edid = drm_get_edid(connector, sbridge->ddc);
+ if (!edid) {
+ DRM_INFO("EDID readout failed, falling back to standard modes\n");
+ goto fallback;
+ }
+
+ drm_connector_update_edid_property(connector, edid);
+ ret = drm_add_edid_modes(connector, edid);
+ kfree(edid);
+ return ret;
+
+fallback:
+ /*
+ * In case we cannot retrieve the EDIDs (broken or missing i2c
+ * bus), fallback on the XGA standards
+ */
+ ret = drm_add_modes_noedid(connector, 1920, 1200);
+
+ /* And prefer a mode pretty much anyone can handle */
+ drm_set_preferred_mode(connector, 1024, 768);
+
+ return ret;
+}
+
+static const struct drm_connector_helper_funcs simple_bridge_con_helper_funcs = {
+ .get_modes = simple_bridge_get_modes,
+};
+
+static enum drm_connector_status
+simple_bridge_connector_detect(struct drm_connector *connector, bool force)
+{
+ struct simple_bridge *sbridge = drm_connector_to_simple_bridge(connector);
+
+ /*
+ * Even if we have an I2C bus, we can't assume that the cable
+ * is disconnected if drm_probe_ddc fails. Some cables don't
+ * wire the DDC pins, or the I2C bus might not be working at
+ * all.
+ */
+ if (sbridge->ddc && drm_probe_ddc(sbridge->ddc))
+ return connector_status_connected;
+
+ return connector_status_unknown;
+}
+
+static const struct drm_connector_funcs simple_bridge_con_funcs = {
+ .detect = simple_bridge_connector_detect,
+ .fill_modes = drm_helper_probe_single_connector_modes,
+ .destroy = drm_connector_cleanup,
+ .reset = drm_atomic_helper_connector_reset,
+ .atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state,
+ .atomic_destroy_state = drm_atomic_helper_connector_destroy_state,
+};
+
+static int simple_bridge_attach(struct drm_bridge *bridge,
+ enum drm_bridge_attach_flags flags)
+{
+ struct simple_bridge *sbridge = drm_bridge_to_simple_bridge(bridge);
+ int ret;
+
+ if (flags & DRM_BRIDGE_ATTACH_NO_CONNECTOR) {
+ DRM_ERROR("Fix bridge driver to make connector optional!");
+ return -EINVAL;
+ }
+
+ if (!bridge->encoder) {
+ DRM_ERROR("Missing encoder\n");
+ return -ENODEV;
+ }
+
+ drm_connector_helper_add(&sbridge->connector,
+ &simple_bridge_con_helper_funcs);
+ ret = drm_connector_init_with_ddc(bridge->dev, &sbridge->connector,
+ &simple_bridge_con_funcs,
+ DRM_MODE_CONNECTOR_VGA,
+ sbridge->ddc);
+ if (ret) {
+ DRM_ERROR("Failed to initialize connector\n");
+ return ret;
+ }
+
+ drm_connector_attach_encoder(&sbridge->connector,
+ bridge->encoder);
+
+ return 0;
+}
+
+static void simple_bridge_enable(struct drm_bridge *bridge)
+{
+ struct simple_bridge *sbridge = drm_bridge_to_simple_bridge(bridge);
+ int ret = 0;
+
+ if (sbridge->vdd)
+ ret = regulator_enable(sbridge->vdd);
+
+ if (ret)
+ DRM_ERROR("Failed to enable vdd regulator: %d\n", ret);
+}
+
+static void simple_bridge_disable(struct drm_bridge *bridge)
+{
+ struct simple_bridge *sbridge = drm_bridge_to_simple_bridge(bridge);
+
+ if (sbridge->vdd)
+ regulator_disable(sbridge->vdd);
+}
+
+static const struct drm_bridge_funcs simple_bridge_bridge_funcs = {
+ .attach = simple_bridge_attach,
+ .enable = simple_bridge_enable,
+ .disable = simple_bridge_disable,
+};
+
+static struct i2c_adapter *simple_bridge_retrieve_ddc(struct device *dev)
+{
+ struct device_node *phandle, *remote;
+ struct i2c_adapter *ddc;
+
+ remote = of_graph_get_remote_node(dev->of_node, 1, -1);
+ if (!remote)
+ return ERR_PTR(-EINVAL);
+
+ phandle = of_parse_phandle(remote, "ddc-i2c-bus", 0);
+ of_node_put(remote);
+ if (!phandle)
+ return ERR_PTR(-ENODEV);
+
+ ddc = of_get_i2c_adapter_by_node(phandle);
+ of_node_put(phandle);
+ if (!ddc)
+ return ERR_PTR(-EPROBE_DEFER);
+
+ return ddc;
+}
+
+static int simple_bridge_probe(struct platform_device *pdev)
+{
+ struct simple_bridge *sbridge;
+
+ sbridge = devm_kzalloc(&pdev->dev, sizeof(*sbridge), GFP_KERNEL);
+ if (!sbridge)
+ return -ENOMEM;
+ platform_set_drvdata(pdev, sbridge);
+
+ sbridge->vdd = devm_regulator_get_optional(&pdev->dev, "vdd");
+ if (IS_ERR(sbridge->vdd)) {
+ int ret = PTR_ERR(sbridge->vdd);
+ if (ret == -EPROBE_DEFER)
+ return -EPROBE_DEFER;
+ sbridge->vdd = NULL;
+ dev_dbg(&pdev->dev, "No vdd regulator found: %d\n", ret);
+ }
+
+ sbridge->ddc = simple_bridge_retrieve_ddc(&pdev->dev);
+ if (IS_ERR(sbridge->ddc)) {
+ if (PTR_ERR(sbridge->ddc) == -ENODEV) {
+ dev_dbg(&pdev->dev,
+ "No i2c bus specified. Disabling EDID readout\n");
+ sbridge->ddc = NULL;
+ } else {
+ dev_err(&pdev->dev, "Couldn't retrieve i2c bus\n");
+ return PTR_ERR(sbridge->ddc);
+ }
+ }
+
+ sbridge->bridge.funcs = &simple_bridge_bridge_funcs;
+ sbridge->bridge.of_node = pdev->dev.of_node;
+ sbridge->bridge.timings = of_device_get_match_data(&pdev->dev);
+
+ drm_bridge_add(&sbridge->bridge);
+
+ return 0;
+}
+
+static int simple_bridge_remove(struct platform_device *pdev)
+{
+ struct simple_bridge *sbridge = platform_get_drvdata(pdev);
+
+ drm_bridge_remove(&sbridge->bridge);
+
+ if (sbridge->ddc)
+ i2c_put_adapter(sbridge->ddc);
+
+ return 0;
+}
+
+/*
+ * We assume the ADV7123 DAC is the "default" for historical reasons
+ * Information taken from the ADV7123 datasheet, revision D.
+ * NOTE: the ADV7123EP seems to have other timings and need a new timings
+ * set if used.
+ */
+static const struct drm_bridge_timings default_bridge_timings = {
+ /* Timing specifications, datasheet page 7 */
+ .input_bus_flags = DRM_BUS_FLAG_PIXDATA_SAMPLE_POSEDGE,
+ .setup_time_ps = 500,
+ .hold_time_ps = 1500,
+};
+
+/*
+ * Information taken from the THS8134, THS8134A, THS8134B datasheet named
+ * "SLVS205D", dated May 1990, revised March 2000.
+ */
+static const struct drm_bridge_timings ti_ths8134_bridge_timings = {
+ /* From timing diagram, datasheet page 9 */
+ .input_bus_flags = DRM_BUS_FLAG_PIXDATA_SAMPLE_POSEDGE,
+ /* From datasheet, page 12 */
+ .setup_time_ps = 3000,
+ /* I guess this means latched input */
+ .hold_time_ps = 0,
+};
+
+/*
+ * Information taken from the THS8135 datasheet named "SLAS343B", dated
+ * May 2001, revised April 2013.
+ */
+static const struct drm_bridge_timings ti_ths8135_bridge_timings = {
+ /* From timing diagram, datasheet page 14 */
+ .input_bus_flags = DRM_BUS_FLAG_PIXDATA_SAMPLE_POSEDGE,
+ /* From datasheet, page 16 */
+ .setup_time_ps = 2000,
+ .hold_time_ps = 500,
+};
+
+static const struct of_device_id simple_bridge_match[] = {
+ {
+ .compatible = "dumb-vga-dac",
+ .data = NULL,
+ },
+ {
+ .compatible = "adi,adv7123",
+ .data = &default_bridge_timings,
+ },
+ {
+ .compatible = "ti,ths8135",
+ .data = &ti_ths8135_bridge_timings,
+ },
+ {
+ .compatible = "ti,ths8134",
+ .data = &ti_ths8134_bridge_timings,
+ },
+ {},
+};
+MODULE_DEVICE_TABLE(of, simple_bridge_match);
+
+static struct platform_driver simple_bridge_driver = {
+ .probe = simple_bridge_probe,
+ .remove = simple_bridge_remove,
+ .driver = {
+ .name = "simple-bridge",
+ .of_match_table = simple_bridge_match,
+ },
+};
+module_platform_driver(simple_bridge_driver);
+
+MODULE_AUTHOR("Maxime Ripard <maxime.ripard@free-electrons.com>");
+MODULE_DESCRIPTION("Simple DRM bridge driver");
+MODULE_LICENSE("GPL");
projects / platform / kernel / linux-starfive.git / commitdiff