Remove b43 PIO support.
DMA works well on all supported devices. There's no reason to use PIO.
Additionally, new devices don't support PIO in hardware anymore.
b43 PIO support is dead and unused code.
After applying this patch please do
git rm drivers/net/wireless/b43/pio.h
git rm drivers/net/wireless/b43/pio.c
to remove the main PIO support code.
Signed-off-by: Michael Buesch <mb@bu3sch.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Say Y, if you want to find out why the driver does not
work for you.
-
-config B43_DMA
- bool
- depends on B43
-config B43_PIO
- bool
- depends on B43
-
-choice
- prompt "Broadcom 43xx data transfer mode"
- depends on B43
- default B43_DMA_AND_PIO_MODE
-
-config B43_DMA_AND_PIO_MODE
- bool "DMA + PIO"
- select B43_DMA
- select B43_PIO
- ---help---
- Include both, Direct Memory Access (DMA) and Programmed I/O (PIO)
- data transfer modes.
- The actually used mode is selectable through the module
- parameter "pio". If the module parameter is pio=0, DMA is used.
- Otherwise PIO is used. DMA is default.
-
- If unsure, choose this option.
-
-config B43_DMA_MODE
- bool "DMA (Direct Memory Access) only"
- select B43_DMA
- ---help---
- Only include Direct Memory Access (DMA).
- This reduces the size of the driver module, by omitting the PIO code.
-
-config B43_PIO_MODE
- bool "PIO (Programmed I/O) only"
- select B43_PIO
- ---help---
- Only include Programmed I/O (PIO).
- This reduces the size of the driver module, by omitting the DMA code.
- Please note that PIO transfers are slow (compared to DMA).
-
- Also note that not all devices of the 43xx series support PIO.
- The 4306 (Apple Airport Extreme and others) supports PIO, while
- the 4318 is known to _not_ support PIO.
-
- Only use PIO, if DMA does not work for you.
-
-endchoice
-# b43 core
b43-y += main.o
b43-y += tables.o
b43-y += phy.o
b43-y += xmit.o
b43-y += lo.o
b43-y += wa.o
-# b43 RFKILL button support
+b43-y += dma.o
b43-$(CONFIG_B43_RFKILL) += rfkill.o
-# b43 LED support
b43-$(CONFIG_B43_LEDS) += leds.o
-# b43 PCMCIA support
b43-$(CONFIG_B43_PCMCIA) += pcmcia.o
-# b43 debugging
b43-$(CONFIG_B43_DEBUG) += debugfs.o
-# b43 DMA and PIO
-b43-$(CONFIG_B43_DMA) += dma.o
-b43-$(CONFIG_B43_PIO) += pio.o
obj-$(CONFIG_B43) += b43.o
#define B43_MMIO_DMA64_BASE3 0x2C0
#define B43_MMIO_DMA64_BASE4 0x300
#define B43_MMIO_DMA64_BASE5 0x340
-/* PIO */
-#define B43_MMIO_PIO1_BASE 0x300
-#define B43_MMIO_PIO2_BASE 0x310
-#define B43_MMIO_PIO3_BASE 0x320
-#define B43_MMIO_PIO4_BASE 0x330
#define B43_MMIO_PHY_VER 0x3E0
#define B43_MMIO_PHY_RADIO 0x3E2
struct b43_dmaring *rx_ring3; /* only available on core.rev < 5 */
};
-/* Data structures for PIO transmission, per 80211 core. */
-struct b43_pio {
- struct b43_pioqueue *queue0;
- struct b43_pioqueue *queue1;
- struct b43_pioqueue *queue2;
- struct b43_pioqueue *queue3;
-};
-
/* Context information for a noise calculation (Link Quality). */
struct b43_noise_calculation {
u8 channel_at_start;
/* Saved init status for handling suspend. */
int suspend_init_status;
- bool __using_pio; /* Internal, use b43_using_pio(). */
bool bad_frames_preempt; /* Use "Bad Frames Preemption" (default off) */
bool reg124_set_0x4; /* Some variable to keep track of IRQ stuff. */
bool short_preamble; /* TRUE, if short preamble is enabled. */
/* PHY/Radio device. */
struct b43_phy phy;
- union {
- /* DMA engines. */
- struct b43_dma dma;
- /* PIO engines. */
- struct b43_pio pio;
- };
+
+ /* DMA engines. */
+ struct b43_dma dma;
/* Various statistics about the physical device. */
struct b43_stats stats;
return hw->priv;
}
-/* Helper function, which returns a boolean.
- * TRUE, if PIO is used; FALSE, if DMA is used.
- */
-#if defined(CONFIG_B43_DMA) && defined(CONFIG_B43_PIO)
-static inline int b43_using_pio(struct b43_wldev *dev)
-{
- return dev->__using_pio;
-}
-#elif defined(CONFIG_B43_DMA)
-static inline int b43_using_pio(struct b43_wldev *dev)
-{
- return 0;
-}
-#elif defined(CONFIG_B43_PIO)
-static inline int b43_using_pio(struct b43_wldev *dev)
-{
- return 1;
-}
-#else
-# error "Using neither DMA nor PIO? Confused..."
-#endif
-
static inline struct b43_wldev *dev_to_b43_wldev(struct device *dev)
{
struct ssb_device *ssb_dev = dev_to_ssb_dev(dev);
#include "main.h"
#include "debugfs.h"
#include "dma.h"
-#include "pio.h"
#include "xmit.h"
void b43_dma_free(struct b43_wldev *dev)
{
- struct b43_dma *dma;
-
- if (b43_using_pio(dev))
- return;
- dma = &dev->dma;
+ struct b43_dma *dma = &dev->dma;
b43_destroy_dmaring(dma->rx_ring3);
dma->rx_ring3 = NULL;
err = ssb_dma_set_mask(dev->dev, dmamask);
if (err) {
-#ifdef B43_PIO
- b43warn(dev->wl, "DMA for this device not supported. "
- "Falling back to PIO\n");
- dev->__using_pio = 1;
- return -EAGAIN;
-#else
- b43err(dev->wl, "DMA for this device not supported and "
- "no PIO support compiled in\n");
+ b43err(dev->wl, "The machine/kernel does not support "
+ "the required DMA mask (0x%08X%08X)\n",
+ (unsigned int)((dmamask & 0xFFFFFFFF00000000ULL) >> 32),
+ (unsigned int)(dmamask & 0x00000000FFFFFFFFULL));
return -EOPNOTSUPP;
-#endif
}
err = -ENOMEM;
#define B43_DMA0_RX_BUFFERSIZE (2304 + 100)
#define B43_DMA3_RX_BUFFERSIZE 16
-#ifdef CONFIG_B43_DMA
-
struct sk_buff;
struct b43_private;
struct b43_txstatus;
void b43_dma_rx(struct b43_dmaring *ring);
-#else /* CONFIG_B43_DMA */
-
-static inline int b43_dma_init(struct b43_wldev *dev)
-{
- return 0;
-}
-static inline void b43_dma_free(struct b43_wldev *dev)
-{
-}
-static inline
- int b43_dmacontroller_rx_reset(struct b43_wldev *dev,
- u16 dmacontroller_mmio_base, int dma64)
-{
- return 0;
-}
-static inline
- int b43_dmacontroller_tx_reset(struct b43_wldev *dev,
- u16 dmacontroller_mmio_base, int dma64)
-{
- return 0;
-}
-static inline
- void b43_dma_get_tx_stats(struct b43_wldev *dev,
- struct ieee80211_tx_queue_stats *stats)
-{
-}
-static inline
- int b43_dma_tx(struct b43_wldev *dev,
- struct sk_buff *skb, struct ieee80211_tx_control *ctl)
-{
- return 0;
-}
-static inline
- void b43_dma_handle_txstatus(struct b43_wldev *dev,
- const struct b43_txstatus *status)
-{
-}
-static inline void b43_dma_rx(struct b43_dmaring *ring)
-{
-}
-static inline void b43_dma_tx_suspend(struct b43_wldev *dev)
-{
-}
-static inline void b43_dma_tx_resume(struct b43_wldev *dev)
-{
-}
-
-#endif /* CONFIG_B43_DMA */
#endif /* B43_DMA_H_ */
#include "debugfs.h"
#include "phy.h"
#include "dma.h"
-#include "pio.h"
#include "sysfs.h"
#include "xmit.h"
#include "lo.h"
MODULE_AUTHOR("Michael Buesch");
MODULE_LICENSE("GPL");
-extern char *nvram_get(char *name);
-
-#if defined(CONFIG_B43_DMA) && defined(CONFIG_B43_PIO)
-static int modparam_pio;
-module_param_named(pio, modparam_pio, int, 0444);
-MODULE_PARM_DESC(pio, "enable(1) / disable(0) PIO mode");
-#elif defined(CONFIG_B43_DMA)
-# define modparam_pio 0
-#elif defined(CONFIG_B43_PIO)
-# define modparam_pio 1
-#endif
static int modparam_bad_frames_preempt;
module_param_named(bad_frames_preempt, modparam_bad_frames_preempt, int, 0444);
handle_irq_noise(dev);
/* Check the DMA reason registers for received data. */
- if (dma_reason[0] & B43_DMAIRQ_RX_DONE) {
- if (b43_using_pio(dev))
- b43_pio_rx(dev->pio.queue0);
- else
- b43_dma_rx(dev->dma.rx_ring0);
- }
+ if (dma_reason[0] & B43_DMAIRQ_RX_DONE)
+ b43_dma_rx(dev->dma.rx_ring0);
+ if (dma_reason[3] & B43_DMAIRQ_RX_DONE)
+ b43_dma_rx(dev->dma.rx_ring3);
B43_WARN_ON(dma_reason[1] & B43_DMAIRQ_RX_DONE);
B43_WARN_ON(dma_reason[2] & B43_DMAIRQ_RX_DONE);
- if (dma_reason[3] & B43_DMAIRQ_RX_DONE) {
- if (b43_using_pio(dev))
- b43_pio_rx(dev->pio.queue3);
- else
- b43_dma_rx(dev->dma.rx_ring3);
- }
B43_WARN_ON(dma_reason[4] & B43_DMAIRQ_RX_DONE);
B43_WARN_ON(dma_reason[5] & B43_DMAIRQ_RX_DONE);
spin_unlock_irqrestore(&dev->wl->irq_lock, flags);
}
-static void pio_irq_workaround(struct b43_wldev *dev, u16 base, int queueidx)
-{
- u16 rxctl;
-
- rxctl = b43_read16(dev, base + B43_PIO_RXCTL);
- if (rxctl & B43_PIO_RXCTL_DATAAVAILABLE)
- dev->dma_reason[queueidx] |= B43_DMAIRQ_RX_DONE;
- else
- dev->dma_reason[queueidx] &= ~B43_DMAIRQ_RX_DONE;
-}
-
static void b43_interrupt_ack(struct b43_wldev *dev, u32 reason)
{
- if (b43_using_pio(dev) &&
- (dev->dev->id.revision < 3) &&
- (!(reason & B43_IRQ_PIO_WORKAROUND))) {
- /* Apply a PIO specific workaround to the dma_reasons */
- pio_irq_workaround(dev, B43_MMIO_PIO1_BASE, 0);
- pio_irq_workaround(dev, B43_MMIO_PIO2_BASE, 1);
- pio_irq_workaround(dev, B43_MMIO_PIO3_BASE, 2);
- pio_irq_workaround(dev, B43_MMIO_PIO4_BASE, 3);
- }
-
b43_write32(dev, B43_MMIO_GEN_IRQ_REASON, reason);
b43_write32(dev, B43_MMIO_DMA0_REASON, dev->dma_reason[0]);
b43_write32(dev, B43_MMIO_MACCTL, b43_read32(dev, B43_MMIO_MACCTL)
| B43_MACCTL_INFRA);
- if (b43_using_pio(dev)) {
- b43_write32(dev, 0x0210, 0x00000100);
- b43_write32(dev, 0x0230, 0x00000100);
- b43_write32(dev, 0x0250, 0x00000100);
- b43_write32(dev, 0x0270, 0x00000100);
- b43_shm_write16(dev, B43_SHM_SHARED, 0x0034, 0x0000);
- }
-
/* Probe Response Timeout value */
/* FIXME: Default to 0, has to be set by ioctl probably... :-/ */
b43_shm_write16(dev, B43_SHM_SHARED, 0x0074, 0x0000);
struct b43_wl *wl = hw_to_b43_wl(hw);
struct b43_wldev *dev = wl->current_dev;
int err = -ENODEV;
- unsigned long flags;
if (unlikely(!dev))
goto out;
if (unlikely(b43_status(dev) < B43_STAT_STARTED))
goto out;
/* DMA-TX is done without a global lock. */
- if (b43_using_pio(dev)) {
- spin_lock_irqsave(&wl->irq_lock, flags);
- err = b43_pio_tx(dev, skb, ctl);
- spin_unlock_irqrestore(&wl->irq_lock, flags);
- } else
- err = b43_dma_tx(dev, skb, ctl);
+ err = b43_dma_tx(dev, skb, ctl);
out:
if (unlikely(err))
return NETDEV_TX_BUSY;
goto out;
spin_lock_irqsave(&wl->irq_lock, flags);
if (likely(b43_status(dev) >= B43_STAT_STARTED)) {
- if (b43_using_pio(dev))
- b43_pio_get_tx_stats(dev, stats);
- else
- b43_dma_get_tx_stats(dev, stats);
+ b43_dma_get_tx_stats(dev, stats);
err = 0;
}
spin_unlock_irqrestore(&wl->irq_lock, flags);
b43_leds_exit(dev);
b43_rng_exit(dev->wl);
- b43_pio_free(dev);
b43_dma_free(dev);
b43_chip_exit(dev);
b43_radio_turn_off(dev, 1);
/* Maximum Contention Window */
b43_shm_write16(dev, B43_SHM_SCRATCH, B43_SHM_SC_MAXCONT, 0x3FF);
- do {
- if (b43_using_pio(dev)) {
- err = b43_pio_init(dev);
- } else {
- err = b43_dma_init(dev);
- if (!err)
- b43_qos_init(dev);
- }
- } while (err == -EAGAIN);
+ err = b43_dma_init(dev);
if (err)
goto err_chip_exit;
+ b43_qos_init(dev);
//FIXME
#if 1
tasklet_init(&wldev->isr_tasklet,
(void (*)(unsigned long))b43_interrupt_tasklet,
(unsigned long)wldev);
- if (modparam_pio)
- wldev->__using_pio = 1;
INIT_LIST_HEAD(&wldev->list);
err = b43_wireless_core_attach(wldev);
#include "xmit.h"
#include "phy.h"
#include "dma.h"
-#include "pio.h"
+
/* Extract the bitrate out of a CCK PLCP header. */
static u8 b43_plcp_get_bitrate_cck(struct b43_plcp_hdr6 *plcp)
dev->wl->ieee_stats.dot11RTSSuccessCount++;
}
- if (b43_using_pio(dev))
- b43_pio_handle_txstatus(dev, status);
- else
- b43_dma_handle_txstatus(dev, status);
+ b43_dma_handle_txstatus(dev, status);
}
/* Handle TX status report as received through DMA/PIO queues */
/* Stop any TX operation on the device (suspend the hardware queues) */
void b43_tx_suspend(struct b43_wldev *dev)
{
- if (b43_using_pio(dev))
- b43_pio_freeze_txqueues(dev);
- else
- b43_dma_tx_suspend(dev);
+ b43_dma_tx_suspend(dev);
}
/* Resume any TX operation on the device (resume the hardware queues) */
void b43_tx_resume(struct b43_wldev *dev)
{
- if (b43_using_pio(dev))
- b43_pio_thaw_txqueues(dev);
- else
- b43_dma_tx_resume(dev);
+ b43_dma_tx_resume(dev);
}
#if 0
projects / profile / ivi / kernel-adaptation-intel-automotive.git / commitdiff