*
*/
-
-/* begin_hvgdk */
+#ifndef __HVSTATUS_H
+#define __HVSTATUS_H
/* Status codes for hypervisor operations. */
-typedef u16 HV_STATUS, *PHV_STATUS;
-
-
-/* MessageId: HV_STATUS_SUCCESS */
-
-/* MessageText: */
-
-/* The specified hypercall succeeded */
-
-#define HV_STATUS_SUCCESS ((HV_STATUS)0x0000)
-
-
-/* MessageId: HV_STATUS_INVALID_HYPERCALL_CODE */
-
-/* MessageText: */
-
-/* The hypervisor does not support the operation because the specified hypercall code is not supported. */
-
-#define HV_STATUS_INVALID_HYPERCALL_CODE ((HV_STATUS)0x0002)
-
-
-/* MessageId: HV_STATUS_INVALID_HYPERCALL_INPUT */
-
-/* MessageText: */
-
-/* The hypervisor does not support the operation because the encoding for the hypercall input register is not supported. */
-
-#define HV_STATUS_INVALID_HYPERCALL_INPUT ((HV_STATUS)0x0003)
-
-
-/* MessageId: HV_STATUS_INVALID_ALIGNMENT */
-
-/* MessageText: */
-
-/* The hypervisor could not perform the operation beacuse a parameter has an invalid alignment. */
-
-#define HV_STATUS_INVALID_ALIGNMENT ((HV_STATUS)0x0004)
-
-
-/* MessageId: HV_STATUS_INVALID_PARAMETER */
-
-/* MessageText: */
-
-/* The hypervisor could not perform the operation beacuse an invalid parameter was specified. */
-
-#define HV_STATUS_INVALID_PARAMETER ((HV_STATUS)0x0005)
-
-
-/* MessageId: HV_STATUS_ACCESS_DENIED */
-
-/* MessageText: */
-
-/* Access to the specified object was denied. */
-
-#define HV_STATUS_ACCESS_DENIED ((HV_STATUS)0x0006)
-
-
-/* MessageId: HV_STATUS_INVALID_PARTITION_STATE */
-
-/* MessageText: */
-
-/* The hypervisor could not perform the operation because the partition is entering or in an invalid state. */
-
-#define HV_STATUS_INVALID_PARTITION_STATE ((HV_STATUS)0x0007)
-
-
-/* MessageId: HV_STATUS_OPERATION_DENIED */
-
-/* MessageText: */
-
-/* The operation is not allowed in the current state. */
-
-#define HV_STATUS_OPERATION_DENIED ((HV_STATUS)0x0008)
-
-
-/* MessageId: HV_STATUS_UNKNOWN_PROPERTY */
-
-/* MessageText: */
-
-/* The hypervisor does not recognize the specified partition property. */
-
-#define HV_STATUS_UNKNOWN_PROPERTY ((HV_STATUS)0x0009)
-
-
-/* MessageId: HV_STATUS_PROPERTY_VALUE_OUT_OF_RANGE */
-
-/* MessageText: */
-
-/* The specified value of a partition property is out of range or violates an invariant. */
-
-#define HV_STATUS_PROPERTY_VALUE_OUT_OF_RANGE ((HV_STATUS)0x000A)
-
-
-/* MessageId: HV_STATUS_INSUFFICIENT_MEMORY */
-
-/* MessageText: */
-
-/* There is not enough memory in the hypervisor pool to complete the operation. */
-
-#define HV_STATUS_INSUFFICIENT_MEMORY ((HV_STATUS)0x000B)
-
-
-/* MessageId: HV_STATUS_PARTITION_TOO_DEEP */
-
-/* MessageText: */
-
-/* The maximum partition depth has been exceeded for the partition hierarchy. */
-
-#define HV_STATUS_PARTITION_TOO_DEEP ((HV_STATUS)0x000C)
-
-
-/* MessageId: HV_STATUS_INVALID_PARTITION_ID */
-
-/* MessageText: */
-
-/* A partition with the specified partition Id does not exist. */
-
-#define HV_STATUS_INVALID_PARTITION_ID ((HV_STATUS)0x000D)
-
-
-/* MessageId: HV_STATUS_INVALID_VP_INDEX */
-
-/* MessageText: */
-
-/* The hypervisor could not perform the operation because the specified VP index is invalid. */
-
-#define HV_STATUS_INVALID_VP_INDEX ((HV_STATUS)0x000E)
-
-
-/* MessageId: HV_STATUS_NOT_FOUND */
-
-/* MessageText: */
-
-/* The iteration is complete; no addition items in the iteration could be found. */
-
-#define HV_STATUS_NOT_FOUND ((HV_STATUS)0x0010)
-
-
-/* MessageId: HV_STATUS_INVALID_PORT_ID */
-
-/* MessageText: */
-
-/* The hypervisor could not perform the operation because the specified port identifier is invalid. */
-
-#define HV_STATUS_INVALID_PORT_ID ((HV_STATUS)0x0011)
-
-
-/* MessageId: HV_STATUS_INVALID_CONNECTION_ID */
-
-/* MessageText: */
-
-/* The hypervisor could not perform the operation because the specified connection identifier is invalid. */
-
-#define HV_STATUS_INVALID_CONNECTION_ID ((HV_STATUS)0x0012)
-
-
-/* MessageId: HV_STATUS_INSUFFICIENT_BUFFERS */
-
-/* MessageText: */
-
-/* You did not supply enough message buffers to send a message. */
-
-#define HV_STATUS_INSUFFICIENT_BUFFERS ((HV_STATUS)0x0013)
-
-
-/* MessageId: HV_STATUS_NOT_ACKNOWLEDGED */
-
-/* MessageText: */
-
-/* The previous virtual interrupt has not been acknowledged. */
-
-#define HV_STATUS_NOT_ACKNOWLEDGED ((HV_STATUS)0x0014)
-
-
-/* MessageId: HV_STATUS_INVALID_VP_STATE */
-
-/* MessageText: */
-
-/* A virtual processor is not in the correct state for the performance of the indicated operation. */
-
-#define HV_STATUS_INVALID_VP_STATE ((HV_STATUS)0x0015)
-
-
-/* MessageId: HV_STATUS_ACKNOWLEDGED */
-
-/* MessageText: */
-
-/* The previous virtual interrupt has already been acknowledged. */
-
-#define HV_STATUS_ACKNOWLEDGED ((HV_STATUS)0x0016)
-
-
-/* MessageId: HV_STATUS_INVALID_SAVE_RESTORE_STATE */
-
-/* MessageText: */
-
-/* The indicated partition is not in a valid state for saving or restoring. */
-
-#define HV_STATUS_INVALID_SAVE_RESTORE_STATE ((HV_STATUS)0x0017)
-
-
-/* MessageId: HV_STATUS_INVALID_SYNIC_STATE */
-
-/* MessageText: */
-
-/* The hypervisor could not complete the operation because a required feature of the synthetic interrupt controller (SynIC) was disabled. */
-
-#define HV_STATUS_INVALID_SYNIC_STATE ((HV_STATUS)0x0018)
-
-
-/* MessageId: HV_STATUS_OBJECT_IN_USE */
-
-/* MessageText: */
-
-/* The hypervisor could not perform the operation because the object or value was either already in use or being used for a purpose that would not permit completing the operation. */
-
-#define HV_STATUS_OBJECT_IN_USE ((HV_STATUS)0x0019)
-
-
-/* MessageId: HV_STATUS_INVALID_PROXIMITY_DOMAIN_INFO */
-
-/* MessageText: */
-
-/* The proximity domain information is invalid. */
-
-#define HV_STATUS_INVALID_PROXIMITY_DOMAIN_INFO ((HV_STATUS)0x001A)
-
-
-/* MessageId: HV_STATUS_NO_DATA */
-
-/* MessageText: */
-
-/* An attempt to retrieve debugging data failed because none was available. */
-
-#define HV_STATUS_NO_DATA ((HV_STATUS)0x001B)
-
-
-/* MessageId: HV_STATUS_INACTIVE */
-
-/* MessageText: */
-
-/* The physical connection being used for debuggging has not recorded any receive activity since the last operation. */
-
-#define HV_STATUS_INACTIVE ((HV_STATUS)0x001C)
-
-
-/* MessageId: HV_STATUS_NO_RESOURCES */
-
-/* MessageText: */
-
-/* There are not enough resources to complete the operation. */
-
-#define HV_STATUS_NO_RESOURCES ((HV_STATUS)0x001D)
-
-
-/* MessageId: HV_STATUS_FEATURE_UNAVAILABLE */
-
-/* MessageText: */
-
-/* A hypervisor feature is not available to the user. */
-
-#define HV_STATUS_FEATURE_UNAVAILABLE ((HV_STATUS)0x001E)
-
-/* end_hvgdk */
-
-
-/* MessageId: HV_STATUS_UNSUCCESSFUL */
-
-/* MessageText: */
-
-/* {Operation Failed} */
-/* The requested operation was unsuccessful. */
-
-#define HV_STATUS_UNSUCCESSFUL ((HV_STATUS)0x1001)
-
-
-/* MessageId: HV_STATUS_INSUFFICIENT_BUFFER */
-
-/* MessageText: */
-
-/* The specified buffer was too small to contain all of the requested data. */
-
-#define HV_STATUS_INSUFFICIENT_BUFFER ((HV_STATUS)0x1002)
-
-
-/* MessageId: HV_STATUS_GPA_NOT_PRESENT */
-
-/* MessageText: */
-
-/* The guest physical address is not currently associated with a system physical address. */
-
-#define HV_STATUS_GPA_NOT_PRESENT ((HV_STATUS)0x1003)
-
-
-/* MessageId: HV_STATUS_GUEST_PAGE_FAULT */
-
-/* MessageText: */
-
-/* The operation would have resulted in a page fault in the guest. */
-
-#define HV_STATUS_GUEST_PAGE_FAULT ((HV_STATUS)0x1004)
-
-
-/* MessageId: HV_STATUS_RUNDOWN_DISABLED */
-
-/* MessageText: */
-
-/* The operation cannot proceed as the rundown object was marked disabled. */
-
-#define HV_STATUS_RUNDOWN_DISABLED ((HV_STATUS)0x1005)
-
-
-/* MessageId: HV_STATUS_KEY_ALREADY_EXISTS */
-
-/* MessageText: */
-
-/* The entry cannot be added as another entry with the same key already exists. */
-
-#define HV_STATUS_KEY_ALREADY_EXISTS ((HV_STATUS)0x1006)
-
-
-/* MessageId: HV_STATUS_GPA_INTERCEPT */
-
-/* MessageText: */
-
-/* The operation resulted an intercept on a region of guest physical memory. */
-
-#define HV_STATUS_GPA_INTERCEPT ((HV_STATUS)0x1007)
-
-
-/* MessageId: HV_STATUS_GUEST_GENERAL_PROTECTION_FAULT */
-
-/* MessageText: */
-
-/* The operation would have resulted in a general protection fault in the guest. */
-
-#define HV_STATUS_GUEST_GENERAL_PROTECTION_FAULT ((HV_STATUS)0x1008)
-
-
-/* MessageId: HV_STATUS_GUEST_STACK_FAULT */
-
-/* MessageText: */
-
-/* The operation would have resulted in a stack fault in the guest. */
-
-#define HV_STATUS_GUEST_STACK_FAULT ((HV_STATUS)0x1009)
-
-
-/* MessageId: HV_STATUS_GUEST_INVALID_OPCODE_FAULT */
-
-/* MessageText: */
-
-/* The operation would have resulted in an invalid opcode fault in the guest. */
-
-#define HV_STATUS_GUEST_INVALID_OPCODE_FAULT ((HV_STATUS)0x100A)
-
-
-/* MessageId: HV_STATUS_FINALIZE_INCOMPLETE */
-
-/* MessageText: */
-
-/* The partition is not completely finalized. */
-
-#define HV_STATUS_FINALIZE_INCOMPLETE ((HV_STATUS)0x100B)
-
-
-/* MessageId: HV_STATUS_GUEST_MACHINE_CHECK_ABORT */
-
-/* MessageText: */
-
-/* The operation would have resulted in an machine check abort in the guest. */
-
-#define HV_STATUS_GUEST_MACHINE_CHECK_ABORT ((HV_STATUS)0x100C)
-
-
-/* MessageId: HV_STATUS_ILLEGAL_OVERLAY_ACCESS */
-
-/* MessageText: */
-
-/* An illegal access was attempted to an overlay page. */
-
-#define HV_STATUS_ILLEGAL_OVERLAY_ACCESS ((HV_STATUS)0x100D)
-
-
-/* MessageId: HV_STATUS_INSUFFICIENT_SYSTEM_VA */
-
-/* MessageText: */
-
-/* There is not enough system VA space available to satisfy the request, */
-
-#define HV_STATUS_INSUFFICIENT_SYSTEM_VA ((HV_STATUS)0x100E)
-
-
-/* MessageId: HV_STATUS_VIRTUAL_ADDRESS_NOT_MAPPED */
-
-/* MessageText: */
-
-/* The passed virtual address was not mapped in the hypervisor address space. */
-
-#define HV_STATUS_VIRTUAL_ADDRESS_NOT_MAPPED ((HV_STATUS)0x100F)
-
-
-/* MessageId: HV_STATUS_NOT_IMPLEMENTED */
-
-/* MessageText: */
-
-/* The requested operation is not implemented in this version of the hypervisor. */
-
-#define HV_STATUS_NOT_IMPLEMENTED ((HV_STATUS)0x1010)
-
-
-/* MessageId: HV_STATUS_VMX_INSTRUCTION_FAILED */
-
-/* MessageText: */
-
-/* The requested VMX instruction failed to complete succesfully. */
-
-#define HV_STATUS_VMX_INSTRUCTION_FAILED ((HV_STATUS)0x1011)
-
-
-/* MessageId: HV_STATUS_VMX_INSTRUCTION_FAILED_WITH_STATUS */
-
-/* MessageText: */
-
-/* The requested VMX instruction failed to complete succesfully indicating status. */
-
-#define HV_STATUS_VMX_INSTRUCTION_FAILED_WITH_STATUS ((HV_STATUS)0x1012)
-
-
-/* MessageId: HV_STATUS_MSR_ACCESS_FAILED */
-
-/* MessageText: */
-
-/* The requested access to the model specific register failed. */
-
-#define HV_STATUS_MSR_ACCESS_FAILED ((HV_STATUS)0x1013)
-
-
-/* MessageId: HV_STATUS_CR_ACCESS_FAILED */
-
-/* MessageText: */
-
-/* The requested access to the control register failed. */
-
-#define HV_STATUS_CR_ACCESS_FAILED ((HV_STATUS)0x1014)
-
-
-/* MessageId: HV_STATUS_TIMEOUT */
-
-/* MessageText: */
-
-/* The specified timeout expired before the operation completed. */
-
-#define HV_STATUS_TIMEOUT ((HV_STATUS)0x1016)
-
-
-/* MessageId: HV_STATUS_MSR_INTERCEPT */
-
-/* MessageText: */
-
-/* The requested access to the model specific register generated an intercept. */
-
-#define HV_STATUS_MSR_INTERCEPT ((HV_STATUS)0x1017)
-
-
-/* MessageId: HV_STATUS_CPUID_INTERCEPT */
-
-/* MessageText: */
-
-/* The CPUID instruction generated an intercept. */
-
-#define HV_STATUS_CPUID_INTERCEPT ((HV_STATUS)0x1018)
-
-
-/* MessageId: HV_STATUS_REPEAT_INSTRUCTION */
-
-/* MessageText: */
-
-/* The current instruction should be repeated and the instruction pointer not advanced. */
-
-#define HV_STATUS_REPEAT_INSTRUCTION ((HV_STATUS)0x1019)
-
-
-/* MessageId: HV_STATUS_PAGE_PROTECTION_VIOLATION */
-
-/* MessageText: */
-
-/* The current instruction should be repeated and the instruction pointer not advanced. */
-
-#define HV_STATUS_PAGE_PROTECTION_VIOLATION ((HV_STATUS)0x101A)
-
-
-/* MessageId: HV_STATUS_PAGE_TABLE_INVALID */
-
-/* MessageText: */
-
-/* The current instruction should be repeated and the instruction pointer not advanced. */
-
-#define HV_STATUS_PAGE_TABLE_INVALID ((HV_STATUS)0x101B)
-
-
-/* MessageId: HV_STATUS_PAGE_NOT_PRESENT */
-
-/* MessageText: */
-
-/* The current instruction should be repeated and the instruction pointer not advanced. */
-
-#define HV_STATUS_PAGE_NOT_PRESENT ((HV_STATUS)0x101C)
-
-
-/* MessageId: HV_STATUS_IO_INTERCEPT */
-
-/* MessageText: */
-
-/* The requested access to the I/O port generated an intercept. */
-
-#define HV_STATUS_IO_INTERCEPT ((HV_STATUS)0x101D)
-
-
-/* MessageId: HV_STATUS_NOTHING_TO_DO */
-
-/* MessageText: */
-
-/* There is nothing to do. */
-
-#define HV_STATUS_NOTHING_TO_DO ((HV_STATUS)0x101E)
-
-
-/* MessageId: HV_STATUS_THREAD_TERMINATING */
-
-/* MessageText: */
-
-/* The requested thread is terminating. */
-
-#define HV_STATUS_THREAD_TERMINATING ((HV_STATUS)0x101F)
-
-
-/* MessageId: HV_STATUS_SECTION_ALREADY_CONSTRUCTED */
-
-/* MessageText: */
-
-/* The specified section was already constructed. */
-
-#define HV_STATUS_SECTION_ALREADY_CONSTRUCTED ((HV_STATUS)0x1020)
-
-
-/* MessageId: HV_STATUS_SECTION_NOT_ALREADY_CONSTRUCTED */
-
-/* MessageText: */
-
-/* The specified section was not already constructed. */
-
-#define HV_STATUS_SECTION_NOT_ALREADY_CONSTRUCTED ((HV_STATUS)0x1021)
+/*
+ * HV_STATUS_SUCCESS
+ * The specified hypercall succeeded
+ */
+#define HV_STATUS_SUCCESS ((u16)0x0000)
+/*
+ * HV_STATUS_INVALID_HYPERCALL_CODE
+ * The hypervisor does not support the operation because the specified
+ * hypercall code is not supported.
+ */
+#define HV_STATUS_INVALID_HYPERCALL_CODE ((u16)0x0002)
-/* MessageId: HV_STATUS_PAGE_ALREADY_COMMITTED */
+/*
+ * HV_STATUS_INVALID_HYPERCALL_INPUT
+ * The hypervisor does not support the operation because the encoding for the
+ * hypercall input register is not supported.
+ */
+#define HV_STATUS_INVALID_HYPERCALL_INPUT ((u16)0x0003)
-/* MessageText: */
+/*
+ * HV_STATUS_INVALID_ALIGNMENT
+ * The hypervisor could not perform the operation beacuse a parameter has an
+ * invalid alignment.
+ */
+#define HV_STATUS_INVALID_ALIGNMENT ((u16)0x0004)
-/* The specified virtual address was already backed by physical memory. */
+/*
+ * HV_STATUS_INVALID_PARAMETER
+ * The hypervisor could not perform the operation beacuse an invalid parameter
+ * was specified.
+ */
+#define HV_STATUS_INVALID_PARAMETER ((u16)0x0005)
-#define HV_STATUS_PAGE_ALREADY_COMMITTED ((HV_STATUS)0x1022)
+/*
+ * HV_STATUS_ACCESS_DENIED
+ * Access to the specified object was denied.
+ */
+#define HV_STATUS_ACCESS_DENIED ((u16)0x0006)
+/*
+ * HV_STATUS_INVALID_PARTITION_STATE
+ * The hypervisor could not perform the operation because the partition is
+ * entering or in an invalid state.
+ */
+#define HV_STATUS_INVALID_PARTITION_STATE ((u16)0x0007)
-/* MessageId: HV_STATUS_PAGE_NOT_ALREADY_COMMITTED */
+/*
+ * HV_STATUS_OPERATION_DENIED
+ * The operation is not allowed in the current state.
+ */
+#define HV_STATUS_OPERATION_DENIED ((u16)0x0008)
-/* MessageText: */
+/*
+ * HV_STATUS_UNKNOWN_PROPERTY
+ * The hypervisor does not recognize the specified partition property.
+ */
+#define HV_STATUS_UNKNOWN_PROPERTY ((u16)0x0009)
-/* The specified virtual address was not already backed by physical memory. */
+/*
+ * HV_STATUS_PROPERTY_VALUE_OUT_OF_RANGE
+ * The specified value of a partition property is out of range or violates an
+ * invariant.
+ */
+#define HV_STATUS_PROPERTY_VALUE_OUT_OF_RANGE ((u16)0x000A)
-#define HV_STATUS_PAGE_NOT_ALREADY_COMMITTED ((HV_STATUS)0x1023)
+/*
+ * HV_STATUS_INSUFFICIENT_MEMORY
+ * There is not enough memory in the hypervisor pool to complete the operation.
+ */
+#define HV_STATUS_INSUFFICIENT_MEMORY ((u16)0x000B)
+/*
+ * HV_STATUS_PARTITION_TOO_DEEP
+ * The maximum partition depth has been exceeded for the partition hierarchy.
+ */
+#define HV_STATUS_PARTITION_TOO_DEEP ((u16)0x000C)
-/* MessageId: HV_STATUS_COMMITTED_PAGES_REMAIN */
+/*
+ * HV_STATUS_INVALID_PARTITION_ID
+ * A partition with the specified partition Id does not exist.
+ */
+#define HV_STATUS_INVALID_PARTITION_ID ((u16)0x000D)
-/* MessageText: */
+/*
+ * HV_STATUS_INVALID_VP_INDEX
+ * The hypervisor could not perform the operation because the specified VP
+ * index is invalid.
+ */
+#define HV_STATUS_INVALID_VP_INDEX ((u16)0x000E)
-/* Committed pages remain in the section. */
+/*
+ * HV_STATUS_NOT_FOUND
+ * The iteration is complete; no addition items in the iteration could be
+ * found.
+ */
+#define HV_STATUS_NOT_FOUND ((u16)0x0010)
-#define HV_STATUS_COMMITTED_PAGES_REMAIN ((HV_STATUS)0x1024)
+/*
+ * HV_STATUS_INVALID_PORT_ID
+ * The hypervisor could not perform the operation because the specified port
+ * identifier is invalid.
+ */
+#define HV_STATUS_INVALID_PORT_ID ((u16)0x0011)
+/*
+ * HV_STATUS_INVALID_CONNECTION_ID
+ * The hypervisor could not perform the operation because the specified
+ * connection identifier is invalid.
+ */
+#define HV_STATUS_INVALID_CONNECTION_ID ((u16)0x0012)
-/* MessageId: HV_STATUS_NO_REMAINING_COMMITTED_PAGES */
+/*
+ * HV_STATUS_INSUFFICIENT_BUFFERS
+ * You did not supply enough message buffers to send a message.
+ */
+#define HV_STATUS_INSUFFICIENT_BUFFERS ((u16)0x0013)
-/* MessageText: */
+/*
+ * HV_STATUS_NOT_ACKNOWLEDGED
+ * The previous virtual interrupt has not been acknowledged.
+ */
+#define HV_STATUS_NOT_ACKNOWLEDGED ((u16)0x0014)
-/* No additional committed pages beyond the specified page exist in the section. */
+/*
+ * HV_STATUS_INVALID_VP_STATE
+ * A virtual processor is not in the correct state for the performance of the
+ * indicated operation.
+ */
+#define HV_STATUS_INVALID_VP_STATE ((u16)0x0015)
-#define HV_STATUS_NO_REMAINING_COMMITTED_PAGES ((HV_STATUS)0x1025)
+/*
+ * HV_STATUS_ACKNOWLEDGED
+ * The previous virtual interrupt has already been acknowledged.
+ */
+#define HV_STATUS_ACKNOWLEDGED ((u16)0x0016)
+/*
+ * HV_STATUS_INVALID_SAVE_RESTORE_STATE
+ * The indicated partition is not in a valid state for saving or restoring.
+ */
+#define HV_STATUS_INVALID_SAVE_RESTORE_STATE ((u16)0x0017)
-/* MessageId: HV_STATUS_INSUFFICIENT_COMPARTMENT_VA */
+/*
+ * HV_STATUS_INVALID_SYNIC_STATE
+ * The hypervisor could not complete the operation because a required feature
+ * of the synthetic interrupt controller (SynIC) was disabled.
+ */
+#define HV_STATUS_INVALID_SYNIC_STATE ((u16)0x0018)
-/* MessageText: */
+/*
+ * HV_STATUS_OBJECT_IN_USE
+ * The hypervisor could not perform the operation because the object or value
+ * was either already in use or being used for a purpose that would not permit
+ * completing the operation.
+ */
+#define HV_STATUS_OBJECT_IN_USE ((u16)0x0019)
-/* The VA space of the compartment is exhausted. */
+/*
+ * HV_STATUS_INVALID_PROXIMITY_DOMAIN_INFO
+ * The proximity domain information is invalid.
+ */
+#define HV_STATUS_INVALID_PROXIMITY_DOMAIN_INFO ((u16)0x001A)
-#define HV_STATUS_INSUFFICIENT_COMPARTMENT_VA ((HV_STATUS)0x1026)
+/*
+ * HV_STATUS_NO_DATA
+ * An attempt to retrieve debugging data failed because none was available.
+ */
+#define HV_STATUS_NO_DATA ((u16)0x001B)
+/*
+ * HV_STATUS_INACTIVE
+ * The physical connection being used for debuggging has not recorded any
+ * receive activity since the last operation.
+ */
+#define HV_STATUS_INACTIVE ((u16)0x001C)
-/* MessageId: HV_STATUS_DEREF_SPA_LIST_FULL */
+/*
+ * HV_STATUS_NO_RESOURCES
+ * There are not enough resources to complete the operation.
+ */
+#define HV_STATUS_NO_RESOURCES ((u16)0x001D)
-/* MessageText: */
+/*
+ * HV_STATUS_FEATURE_UNAVAILABLE
+ * A hypervisor feature is not available to the user.
+ */
+#define HV_STATUS_FEATURE_UNAVAILABLE ((u16)0x001E)
-/* The SPA dereference list is full, and there are additional entries */
-/* to be added to it. */
+/*
+ * HV_STATUS_UNSUCCESSFUL
+ * {Operation Failed} The requested operation was unsuccessful.
+ */
+#define HV_STATUS_UNSUCCESSFUL ((u16)0x1001)
-#define HV_STATUS_DEREF_SPA_LIST_FULL ((HV_STATUS)0x1027)
+/*
+ * HV_STATUS_INSUFFICIENT_BUFFER
+ * The specified buffer was too small to contain all of the requested data.
+ */
+#define HV_STATUS_INSUFFICIENT_BUFFER ((u16)0x1002)
+/*
+ * HV_STATUS_GPA_NOT_PRESENT
+ * The guest physical address is not currently associated with a system
+ * physical address.
+ */
+#define HV_STATUS_GPA_NOT_PRESENT ((u16)0x1003)
-/* MessageId: HV_STATUS_GPA_OUT_OF_RANGE */
+/*
+ * HV_STATUS_GUEST_PAGE_FAULT
+ * The operation would have resulted in a page fault in the guest.
+ */
+#define HV_STATUS_GUEST_PAGE_FAULT ((u16)0x1004)
-/* MessageText: */
+/*
+ * HV_STATUS_RUNDOWN_DISABLED
+ * The operation cannot proceed as the rundown object was marked disabled.
+ */
+#define HV_STATUS_RUNDOWN_DISABLED ((u16)0x1005)
-/* The supplied GPA is out of range. */
+/*
+ * HV_STATUS_KEY_ALREADY_EXISTS
+ * The entry cannot be added as another entry with the same key already exists.
+ */
+#define HV_STATUS_KEY_ALREADY_EXISTS ((u16)0x1006)
-#define HV_STATUS_GPA_OUT_OF_RANGE ((HV_STATUS)0x1027)
+/*
+ * HV_STATUS_GPA_INTERCEPT
+ * The operation resulted an intercept on a region of guest physical memory.
+ */
+#define HV_STATUS_GPA_INTERCEPT ((u16)0x1007)
+/*
+ * HV_STATUS_GUEST_GENERAL_PROTECTION_FAULT
+ * The operation would have resulted in a general protection fault in the
+ * guest.
+ */
+#define HV_STATUS_GUEST_GENERAL_PROTECTION_FAULT ((u16)0x1008)
-/* MessageId: HV_STATUS_NONVOLATILE_XMM_STALE */
+/*
+ * HV_STATUS_GUEST_STACK_FAULT
+ * The operation would have resulted in a stack fault in the guest.
+ */
+#define HV_STATUS_GUEST_STACK_FAULT ((u16)0x1009)
-/* MessageText: */
+/*
+ * HV_STATUS_GUEST_INVALID_OPCODE_FAULT
+ * The operation would have resulted in an invalid opcode fault in the guest.
+ */
+#define HV_STATUS_GUEST_INVALID_OPCODE_FAULT ((u16)0x100A)
-/* The XMM register that was being accessed is stale. */
+/*
+ * HV_STATUS_FINALIZE_INCOMPLETE
+ * The partition is not completely finalized.
+ */
+#define HV_STATUS_FINALIZE_INCOMPLETE ((u16)0x100B)
-#define HV_STATUS_NONVOLATILE_XMM_STALE ((HV_STATUS)0x1028)
+/*
+ * HV_STATUS_GUEST_MACHINE_CHECK_ABORT
+ * The operation would have resulted in an machine check abort in the guest.
+ */
+#define HV_STATUS_GUEST_MACHINE_CHECK_ABORT ((u16)0x100C)
+/*
+ * HV_STATUS_ILLEGAL_OVERLAY_ACCESS
+ * An illegal access was attempted to an overlay page.
+ */
+#define HV_STATUS_ILLEGAL_OVERLAY_ACCESS ((u16)0x100D)
-/* MessageId: HV_STATUS_UNSUPPORTED_PROCESSOR */
+/*
+ * HV_STATUS_INSUFFICIENT_SYSTEM_VA
+ * There is not enough system VA space available to satisfy the request,
+ */
+#define HV_STATUS_INSUFFICIENT_SYSTEM_VA ((u16)0x100E)
-/* MessageText: */
+/*
+ * HV_STATUS_VIRTUAL_ADDRESS_NOT_MAPPED
+ * The passed virtual address was not mapped in the hypervisor address space.
+ */
+#define HV_STATUS_VIRTUAL_ADDRESS_NOT_MAPPED ((u16)0x100F)
-/* The hypervisor does not support the processors in this system. */
+/*
+ * HV_STATUS_NOT_IMPLEMENTED
+ * The requested operation is not implemented in this version of the
+ * hypervisor.
+ */
+#define HV_STATUS_NOT_IMPLEMENTED ((u16)0x1010)
-#define HV_STATUS_UNSUPPORTED_PROCESSOR ((HV_STATUS)0x1029)
+/*
+ * HV_STATUS_VMX_INSTRUCTION_FAILED
+ * The requested VMX instruction failed to complete succesfully.
+ */
+#define HV_STATUS_VMX_INSTRUCTION_FAILED ((u16)0x1011)
+/*
+ * HV_STATUS_VMX_INSTRUCTION_FAILED_WITH_STATUS
+ * The requested VMX instruction failed to complete succesfully indicating
+ * status.
+ */
+#define HV_STATUS_VMX_INSTRUCTION_FAILED_WITH_STATUS ((u16)0x1012)
-/* MessageId: HV_STATUS_INSUFFICIENT_CROM_SPACE */
+/*
+ * HV_STATUS_MSR_ACCESS_FAILED
+ * The requested access to the model specific register failed.
+ */
+#define HV_STATUS_MSR_ACCESS_FAILED ((u16)0x1013)
-/* MessageText: */
+/*
+ * HV_STATUS_CR_ACCESS_FAILED
+ * The requested access to the control register failed.
+ */
+#define HV_STATUS_CR_ACCESS_FAILED ((u16)0x1014)
-/* Insufficient space existed for copying over the CROM contents. */
+/*
+ * HV_STATUS_TIMEOUT
+ * The specified timeout expired before the operation completed.
+ */
+#define HV_STATUS_TIMEOUT ((u16)0x1016)
-#define HV_STATUS_INSUFFICIENT_CROM_SPACE ((HV_STATUS)0x2000)
+/*
+ * HV_STATUS_MSR_INTERCEPT
+ * The requested access to the model specific register generated an intercept.
+ */
+#define HV_STATUS_MSR_INTERCEPT ((u16)0x1017)
+/*
+ * HV_STATUS_CPUID_INTERCEPT
+ * The CPUID instruction generated an intercept.
+ */
+#define HV_STATUS_CPUID_INTERCEPT ((u16)0x1018)
-/* MessageId: HV_STATUS_BAD_CROM_FORMAT */
+/*
+ * HV_STATUS_REPEAT_INSTRUCTION
+ * The current instruction should be repeated and the instruction pointer not
+ * advanced.
+ */
+#define HV_STATUS_REPEAT_INSTRUCTION ((u16)0x1019)
-/* MessageText: */
+/*
+ * HV_STATUS_PAGE_PROTECTION_VIOLATION
+ * The current instruction should be repeated and the instruction pointer not
+ * advanced.
+ */
+#define HV_STATUS_PAGE_PROTECTION_VIOLATION ((u16)0x101A)
-/* The contents of the CROM failed validation attempts. */
+/*
+ * HV_STATUS_PAGE_TABLE_INVALID
+ * The current instruction should be repeated and the instruction pointer not
+ * advanced.
+ */
+#define HV_STATUS_PAGE_TABLE_INVALID ((u16)0x101B)
-#define HV_STATUS_BAD_CROM_FORMAT ((HV_STATUS)0x2001)
+/*
+ * HV_STATUS_PAGE_NOT_PRESENT
+ * The current instruction should be repeated and the instruction pointer not
+ * advanced.
+ */
+#define HV_STATUS_PAGE_NOT_PRESENT ((u16)0x101C)
+/*
+ * HV_STATUS_IO_INTERCEPT
+ * The requested access to the I/O port generated an intercept.
+ */
+#define HV_STATUS_IO_INTERCEPT ((u16)0x101D)
-/* MessageId: HV_STATUS_UNSUPPORTED_CROM_FORMAT */
+/*
+ * HV_STATUS_NOTHING_TO_DO
+ * There is nothing to do.
+ */
+#define HV_STATUS_NOTHING_TO_DO ((u16)0x101E)
-/* MessageText: */
+/*
+ * HV_STATUS_THREAD_TERMINATING
+ * The requested thread is terminating.
+ */
+#define HV_STATUS_THREAD_TERMINATING ((u16)0x101F)
-/* The contents of the CROM contain contents the parser doesn't support. */
+/*
+ * HV_STATUS_SECTION_ALREADY_CONSTRUCTED
+ * The specified section was already constructed.
+ */
+#define HV_STATUS_SECTION_ALREADY_CONSTRUCTED ((u16)0x1020)
-#define HV_STATUS_UNSUPPORTED_CROM_FORMAT ((HV_STATUS)0x2002)
+/* HV_STATUS_SECTION_NOT_ALREADY_CONSTRUCTED
+ * The specified section was not already constructed.
+ */
+#define HV_STATUS_SECTION_NOT_ALREADY_CONSTRUCTED ((u16)0x1021)
+/*
+ * HV_STATUS_PAGE_ALREADY_COMMITTED
+ * The specified virtual address was already backed by physical memory.
+ */
+#define HV_STATUS_PAGE_ALREADY_COMMITTED ((u16)0x1022)
-/* MessageId: HV_STATUS_UNSUPPORTED_CONTROLLER */
+/*
+ * HV_STATUS_PAGE_NOT_ALREADY_COMMITTED
+ * The specified virtual address was not already backed by physical memory.
+ */
+#define HV_STATUS_PAGE_NOT_ALREADY_COMMITTED ((u16)0x1023)
-/* MessageText: */
+/*
+ * HV_STATUS_COMMITTED_PAGES_REMAIN
+ * Committed pages remain in the section.
+ */
+#define HV_STATUS_COMMITTED_PAGES_REMAIN ((u16)0x1024)
-/* The register format of the OHCI controller specified for debugging is not supported. */
+/*
+ * HV_STATUS_NO_REMAINING_COMMITTED_PAGES
+ * No additional committed pages beyond the specified page exist in the
+ * section.
+ */
+#define HV_STATUS_NO_REMAINING_COMMITTED_PAGES ((u16)0x1025)
-#define HV_STATUS_UNSUPPORTED_CONTROLLER ((HV_STATUS)0x2003)
+/*
+ * HV_STATUS_INSUFFICIENT_COMPARTMENT_VA
+ * The VA space of the compartment is exhausted.
+ */
+#define HV_STATUS_INSUFFICIENT_COMPARTMENT_VA ((u16)0x1026)
+/*
+ * HV_STATUS_DEREF_SPA_LIST_FULL
+ * The SPA dereference list is full, and there are additional entries to be
+ * added to it.
+ */
+#define HV_STATUS_DEREF_SPA_LIST_FULL ((u16)0x1027)
-/* MessageId: HV_STATUS_CROM_TOO_LARGE */
+/*
+ * HV_STATUS_GPA_OUT_OF_RANGE
+ * The supplied GPA is out of range.
+ */
+#define HV_STATUS_GPA_OUT_OF_RANGE ((u16)0x1027)
-/* MessageText: */
+/*
+ * HV_STATUS_NONVOLATILE_XMM_STALE
+ * The XMM register that was being accessed is stale.
+ */
+#define HV_STATUS_NONVOLATILE_XMM_STALE ((u16)0x1028)
-/* The CROM contents were to large to copy over. */
+/* HV_STATUS_UNSUPPORTED_PROCESSOR
+ * The hypervisor does not support the processors in this system.
+ */
+#define HV_STATUS_UNSUPPORTED_PROCESSOR ((u16)0x1029)
-#define HV_STATUS_CROM_TOO_LARGE ((HV_STATUS)0x2004)
+/*
+ * HV_STATUS_INSUFFICIENT_CROM_SPACE
+ * Insufficient space existed for copying over the CROM contents.
+ */
+#define HV_STATUS_INSUFFICIENT_CROM_SPACE ((u16)0x2000)
+/*
+ * HV_STATUS_BAD_CROM_FORMAT
+ * The contents of the CROM failed validation attempts.
+ */
+#define HV_STATUS_BAD_CROM_FORMAT ((u16)0x2001)
-/* MessageId: HV_STATUS_CONTROLLER_IN_USE */
+/*
+ * HV_STATUS_UNSUPPORTED_CROM_FORMAT
+ * The contents of the CROM contain contents the parser doesn't support.
+ */
+#define HV_STATUS_UNSUPPORTED_CROM_FORMAT ((u16)0x2002)
-/* MessageText: */
+/*
+ * HV_STATUS_UNSUPPORTED_CONTROLLER
+ * The register format of the OHCI controller specified for debugging is not
+ * supported.
+ */
+#define HV_STATUS_UNSUPPORTED_CONTROLLER ((u16)0x2003)
-/* The OHCI controller specified for debugging cannot be used as it is already in use. */
+/*
+ * HV_STATUS_CROM_TOO_LARGE
+ * The CROM contents were to large to copy over.
+ */
+#define HV_STATUS_CROM_TOO_LARGE ((u16)0x2004)
-#define HV_STATUS_CONTROLLER_IN_USE ((HV_STATUS)0x2005)
+/*
+ * HV_STATUS_CONTROLLER_IN_USE
+ * The OHCI controller specified for debugging cannot be used as it is already
+ * in use.
+ */
+#define HV_STATUS_CONTROLLER_IN_USE ((u16)0x2005)
+#endif
projects / platform / kernel / linux-starfive.git / commitdiff