drivers: char: add generic gpiomem driver
authorJonathan Bell <jonathan@raspberrypi.com>
Tue, 25 Apr 2023 14:52:13 +0000 (15:52 +0100)
committerDom Cobley <popcornmix@gmail.com>
Mon, 19 Feb 2024 11:33:40 +0000 (11:33 +0000)
Based on bcm2835-gpiomem.

We allow export of the "GPIO registers" to userspace via a chardev as
this allows for finer access control (e.g. users must be group gpio, root
not required).

This driver allows access to either rp1-gpiomem or gpiomem, depending on
which nodes are populated in devicetree.

RP1 has a different look-and-feel to BCM283x SoCs as it has split ranges
for IO controls and the parallel registered OE/IN/OUT access. To handle
this, the driver concatenates the ranges for an IO bank and the
corresponding RIO instance into a contiguous buffer.

Signed-off-by: Jonathan Bell <jonathan@raspberrypi.com>
drivers/char/Kconfig
drivers/char/Makefile
drivers/char/raspberrypi-gpiomem.c [new file with mode: 0644]

index 735d992..96c3c37 100644 (file)
@@ -424,4 +424,12 @@ config ADI
          and SSM (Silicon Secured Memory).  Intended consumers of this
          driver include crash and makedumpfile.
 
+config RASPBERRYPI_GPIOMEM
+        tristate "Rootless GPIO access via mmap() on Raspberry Pi boards"
+        default n
+        help
+                Provides users with root-free access to the GPIO registers
+                on the board. Calling mmap(/dev/gpiomem) will map the GPIO
+                register page to the user's pointer.
+
 endmenu
index 723e9fe..2ae1602 100644 (file)
@@ -45,3 +45,4 @@ obj-$(CONFIG_XILLYBUS_CLASS)  += xillybus/
 obj-$(CONFIG_POWERNV_OP_PANEL) += powernv-op-panel.o
 obj-$(CONFIG_ADI)              += adi.o
 obj-$(CONFIG_BRCM_CHAR_DRIVERS) += broadcom/
+obj-$(CONFIG_RASPBERRYPI_GPIOMEM) += raspberrypi-gpiomem.o
diff --git a/drivers/char/raspberrypi-gpiomem.c b/drivers/char/raspberrypi-gpiomem.c
new file mode 100644 (file)
index 0000000..8606f39
--- /dev/null
@@ -0,0 +1,276 @@
+// SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause
+/**
+ * raspberrypi-gpiomem.c
+ *
+ * Provides MMIO access to discontiguous section of Device memory as a linear
+ * user mapping. Successor to bcm2835-gpiomem.c.
+ *
+ * Copyright (c) 2023, Raspberry Pi Ltd.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/mm.h>
+#include <linux/slab.h>
+#include <linux/cdev.h>
+#include <linux/pagemap.h>
+#include <linux/io.h>
+
+#define DRIVER_NAME "rpi-gpiomem"
+#define DEVICE_MINOR 0
+
+/*
+ * Sensible max for a hypothetical "gpio" controller that splits pads,
+ * IO controls, GPIO in/out/enable, and function selection into different
+ * ranges. Most use only one or two.
+ */
+#define MAX_RANGES 4
+
+struct io_windows {
+       unsigned long phys_base;
+       unsigned long len;
+};
+
+struct rpi_gpiomem_priv {
+       dev_t devid;
+       struct class *class;
+       struct cdev rpi_gpiomem_cdev;
+       struct device *dev;
+       const char *name;
+       unsigned int nr_wins;
+       struct io_windows iowins[4];
+};
+
+static int rpi_gpiomem_open(struct inode *inode, struct file *file)
+{
+       int dev = iminor(inode);
+       int ret = 0;
+       struct rpi_gpiomem_priv *priv;
+
+       if (dev != DEVICE_MINOR)
+               ret = -ENXIO;
+
+       priv = container_of(inode->i_cdev, struct rpi_gpiomem_priv,
+                               rpi_gpiomem_cdev);
+       if (!priv)
+               return -EINVAL;
+       file->private_data = priv;
+       return ret;
+}
+
+static int rpi_gpiomem_release(struct inode *inode, struct file *file)
+{
+       int dev = iminor(inode);
+       int ret = 0;
+
+       if (dev != DEVICE_MINOR)
+               ret = -ENXIO;
+
+       return ret;
+}
+
+static const struct vm_operations_struct rpi_gpiomem_vm_ops = {
+#ifdef CONFIG_HAVE_IOREMAP_PROT
+       .access = generic_access_phys
+#endif
+};
+
+static int rpi_gpiomem_mmap(struct file *file, struct vm_area_struct *vma)
+{
+       int i;
+       struct rpi_gpiomem_priv *priv;
+       unsigned long base;
+       unsigned long len = 0;
+       unsigned long offset;
+
+       priv = file->private_data;
+       /*
+        * Userspace must provide a virtual address space at least
+        * the size of the concatenated ranges.
+        */
+       for (i = 0; i < priv->nr_wins; i++)
+               len += priv->iowins[i].len;
+       if (len > vma->vm_end - vma->vm_start + 1)
+               return -EINVAL;
+
+       vma->vm_ops = &rpi_gpiomem_vm_ops;
+       offset = vma->vm_start;
+       for (i = 0; i < priv->nr_wins; i++) {
+               base = priv->iowins[i].phys_base >> PAGE_SHIFT;
+               len = priv->iowins[i].len;
+               vma->vm_page_prot = phys_mem_access_prot(file, base, len,
+                                                        vma->vm_page_prot);
+               if (remap_pfn_range(vma, offset,
+                           base, len,
+                           vma->vm_page_prot))
+                       break;
+               offset += len;
+       }
+
+       if (i < priv->nr_wins)
+               return -EAGAIN;
+
+       return 0;
+}
+
+static const struct file_operations rpi_gpiomem_fops = {
+       .owner = THIS_MODULE,
+       .open = rpi_gpiomem_open,
+       .release = rpi_gpiomem_release,
+       .mmap = rpi_gpiomem_mmap,
+};
+
+static const struct of_device_id rpi_gpiomem_of_match[];
+
+static int rpi_gpiomem_probe(struct platform_device *pdev)
+{
+       int err, i;
+       const struct of_device_id *id;
+       struct device *dev = &pdev->dev;
+       struct device_node *node = dev->of_node;
+       struct resource *ioresource;
+       struct rpi_gpiomem_priv *priv;
+
+       /* Allocate buffers and instance data */
+
+       priv = kzalloc(sizeof(struct rpi_gpiomem_priv), GFP_KERNEL);
+
+       if (!priv) {
+               err = -ENOMEM;
+               goto failed_inst_alloc;
+       }
+       platform_set_drvdata(pdev, priv);
+
+       priv->dev = dev;
+       id = of_match_device(rpi_gpiomem_of_match, dev);
+       if (!id)
+               return -EINVAL;
+
+       /*
+        * Device node naming - for legacy (bcm2835) DT bindings, the driver
+        * created the node based on a hardcoded name - for new bindings,
+        * take the node name from DT.
+        */
+       if (id == &rpi_gpiomem_of_match[0]) {
+               priv->name = "gpiomem";
+       } else {
+               err = of_property_read_string(node, "chardev-name", &priv->name);
+               if (err)
+                       return -EINVAL;
+       }
+
+       /*
+        * Go find the register ranges associated with this instance
+        */
+       for (i = 0; i < MAX_RANGES; i++) {
+               ioresource = platform_get_resource(pdev, IORESOURCE_MEM, i);
+               if (!ioresource && i == 0) {
+                       dev_err(priv->dev, "failed to get IO resource - no ranges available\n");
+                       err = -ENOENT;
+                       goto failed_get_resource;
+               }
+               if (!ioresource)
+                       break;
+
+               priv->iowins[i].phys_base = ioresource->start;
+               priv->iowins[i].len = (ioresource->end + 1) - ioresource->start;
+               dev_info(&pdev->dev, "window base 0x%08lx size 0x%08lx\n",
+                        priv->iowins[i].phys_base, priv->iowins[i].len);
+               priv->nr_wins++;
+       }
+
+       /* Create character device entries */
+
+       err = alloc_chrdev_region(&priv->devid,
+                                 DEVICE_MINOR, 1, priv->name);
+       if (err != 0) {
+               dev_err(priv->dev, "unable to allocate device number");
+               goto failed_alloc_chrdev;
+       }
+       cdev_init(&priv->rpi_gpiomem_cdev, &rpi_gpiomem_fops);
+       priv->rpi_gpiomem_cdev.owner = THIS_MODULE;
+       err = cdev_add(&priv->rpi_gpiomem_cdev, priv->devid, 1);
+       if (err != 0) {
+               dev_err(priv->dev, "unable to register device");
+               goto failed_cdev_add;
+       }
+
+       /* Create sysfs entries */
+
+       priv->class = class_create(priv->name);
+       if (IS_ERR(priv->class)) {
+               err = PTR_ERR(priv->class);
+               goto failed_class_create;
+       }
+
+       dev = device_create(priv->class, NULL, priv->devid, NULL, priv->name);
+       if (IS_ERR(dev)) {
+               err = PTR_ERR(dev);
+               goto failed_device_create;
+       }
+
+       dev_info(priv->dev, "initialised %u regions as /dev/%s\n",
+                priv->nr_wins, priv->name);
+
+       return 0;
+
+failed_device_create:
+       class_destroy(priv->class);
+failed_class_create:
+       cdev_del(&priv->rpi_gpiomem_cdev);
+failed_cdev_add:
+       unregister_chrdev_region(priv->devid, 1);
+failed_alloc_chrdev:
+failed_get_resource:
+       kfree(priv);
+failed_inst_alloc:
+       dev_err(&pdev->dev, "could not load rpi_gpiomem");
+       return err;
+}
+
+static int rpi_gpiomem_remove(struct platform_device *pdev)
+{
+       struct device *dev = &pdev->dev;
+       struct rpi_gpiomem_priv *priv = platform_get_drvdata(pdev);
+
+       device_destroy(priv->class, priv->devid);
+       class_destroy(priv->class);
+       cdev_del(&priv->rpi_gpiomem_cdev);
+       unregister_chrdev_region(priv->devid, 1);
+       kfree(priv);
+
+       dev_info(dev, "%s driver removed - OK", priv->name);
+       return 0;
+}
+
+static const struct of_device_id rpi_gpiomem_of_match[] = {
+       {
+               .compatible = "brcm,bcm2835-gpiomem",
+       },
+       {
+               .compatible = "raspberrypi,gpiomem",
+       },
+       { /* sentinel */ },
+};
+
+MODULE_DEVICE_TABLE(of, rpi_gpiomem_of_match);
+
+static struct platform_driver rpi_gpiomem_driver = {
+       .probe = rpi_gpiomem_probe,
+       .remove = rpi_gpiomem_remove,
+       .driver = {
+                  .name = DRIVER_NAME,
+                  .owner = THIS_MODULE,
+                  .of_match_table = rpi_gpiomem_of_match,
+                  },
+};
+
+module_platform_driver(rpi_gpiomem_driver);
+
+MODULE_ALIAS("platform:rpi-gpiomem");
+MODULE_LICENSE("Dual BSD/GPL");
+MODULE_DESCRIPTION("Driver for accessing GPIOs from userspace");
+MODULE_AUTHOR("Jonathan Bell <jonathan@raspberrypi.com>");