wil6210: support AP isolation

For the AP, configuration may say not to bridge traffic between
wireless clients. This is conveyed from user space (ex: hostapd has
ap_isolate parameter) with NL80211_CMD_SET_BSS, to the driver's
cfg80211 ops method change_bss

Add support for this setting.

Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>

diff --git a/drivers/net/wireless/ath/wil6210/cfg80211.c b/drivers/net/wireless/ath/wil6210/cfg80211.c
index 4bd708c..5db6a6d 100644 (file)
--- a/drivers/net/wireless/ath/wil6210/cfg80211.c
+++ b/drivers/net/wireless/ath/wil6210/cfg80211.c
@@ -917,6 +917,21 @@ static int wil_cfg80211_probe_client(struct wiphy *wiphy,
        return 0;
 }
 
+static int wil_cfg80211_change_bss(struct wiphy *wiphy,
+                                  struct net_device *dev,
+                                  struct bss_parameters *params)
+{
+       struct wil6210_priv *wil = wiphy_to_wil(wiphy);
+
+       if (params->ap_isolate >= 0) {
+               wil_dbg_misc(wil, "%s(ap_isolate %d => %d)\n", __func__,
+                            wil->ap_isolate, params->ap_isolate);
+               wil->ap_isolate = params->ap_isolate;
+       }
+
+       return 0;
+}
+
 static struct cfg80211_ops wil_cfg80211_ops = {
        .scan = wil_cfg80211_scan,
        .connect = wil_cfg80211_connect,
@@ -937,6 +952,7 @@ static struct cfg80211_ops wil_cfg80211_ops = {
        .stop_ap = wil_cfg80211_stop_ap,
        .del_station = wil_cfg80211_del_station,
        .probe_client = wil_cfg80211_probe_client,
+       .change_bss = wil_cfg80211_change_bss,
 };
 
 static void wil_wiphy_init(struct wiphy *wiphy)

diff --git a/drivers/net/wireless/ath/wil6210/debugfs.c b/drivers/net/wireless/ath/wil6210/debugfs.c
index 3830cc2..a42cb89 100644 (file)
--- a/drivers/net/wireless/ath/wil6210/debugfs.c
+++ b/drivers/net/wireless/ath/wil6210/debugfs.c
@@ -1405,6 +1405,7 @@ static const struct dbg_off dbg_wil_off[] = {
        WIL_FIELD(fw_version,   S_IRUGO,                doff_u32),
        WIL_FIELD(hw_version,   S_IRUGO,                doff_x32),
        WIL_FIELD(recovery_count, S_IRUGO,              doff_u32),
+       WIL_FIELD(ap_isolate,   S_IRUGO,                doff_u32),
        {},
 };
 

diff --git a/drivers/net/wireless/ath/wil6210/main.c b/drivers/net/wireless/ath/wil6210/main.c
index db74e81..afff8d3 100644 (file)
--- a/drivers/net/wireless/ath/wil6210/main.c
+++ b/drivers/net/wireless/ath/wil6210/main.c
@@ -714,6 +714,7 @@ int wil_reset(struct wil6210_priv *wil, bool load_fw)
 
        /* init after reset */
        wil->pending_connect_cid = -1;
+       wil->ap_isolate = 0;
        reinit_completion(&wil->wmi_ready);
        reinit_completion(&wil->wmi_call);
 

diff --git a/drivers/net/wireless/ath/wil6210/txrx.c b/drivers/net/wireless/ath/wil6210/txrx.c
index 08d3cac..689081c 100644 (file)
--- a/drivers/net/wireless/ath/wil6210/txrx.c
+++ b/drivers/net/wireless/ath/wil6210/txrx.c
@@ -515,7 +515,7 @@ void wil_netif_rx_any(struct sk_buff *skb, struct net_device *ndev)
 
        skb_orphan(skb);
 
-       if (wdev->iftype == NL80211_IFTYPE_AP) {
+       if (wdev->iftype == NL80211_IFTYPE_AP && !wil->ap_isolate) {
                if (mcast) {
                        /* send multicast frames both to higher layers in
                         * local net stack and back to the wireless medium

diff --git a/drivers/net/wireless/ath/wil6210/wil6210.h b/drivers/net/wireless/ath/wil6210/wil6210.h
index b6e65c3..c1a71ab 100644 (file)
--- a/drivers/net/wireless/ath/wil6210/wil6210.h
+++ b/drivers/net/wireless/ath/wil6210/wil6210.h
@@ -542,6 +542,7 @@ struct wil6210_priv {
        u32 monitor_flags;
        u32 privacy; /* secure connection? */
        int sinfo_gen;
+       u32 ap_isolate; /* no intra-BSS communication */
        /* interrupt moderation */
        u32 tx_max_burst_duration;
        u32 tx_interframe_timeout;