ice: reset first in crash dump kernels

When the system boots into the crash dump kernel after a panic, the ice
networking device may still have pending transactions that can cause errors
or machine checks when the device is re-enabled. This can prevent the crash
dump kernel from loading the driver or collecting the crash data.

To avoid this issue, perform a function level reset (FLR) on the ice device
via PCIe config space before enabling it on the crash kernel. This will
clear any outstanding transactions and stop all queues and interrupts.
Restore the config space after the FLR, otherwise it was found in testing
that the driver wouldn't load successfully.

The following sequence causes the original issue:
- Load the ice driver with modprobe ice
- Enable SR-IOV with 2 VFs: echo 2 > /sys/class/net/eth0/device/sriov_num_vfs
- Trigger a crash with echo c > /proc/sysrq-trigger
- Load the ice driver again (or let it load automatically) with modprobe ice
- The system crashes again during pcim_enable_device()

Fixes: 837f08fdecbe ("ice: Add basic driver framework for Intel(R) E800 Series")
Reported-by: Vishal Agrawal <vagrawal@redhat.com>
Reviewed-by: Jay Vosburgh <jay.vosburgh@canonical.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Link: https://lore.kernel.org/r/20231011233334.336092-3-jacob.e.keller@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

diff --git a/drivers/net/ethernet/intel/ice/ice_main.c b/drivers/net/ethernet/intel/ice/ice_main.c
index c8286adae94629ec725dc1c8c94d208fd1533845..6550c46e4e369b6e43bc4516cada8ad744f1a2ad 100644 (file)
--- a/drivers/net/ethernet/intel/ice/ice_main.c
+++ b/drivers/net/ethernet/intel/ice/ice_main.c
@@ -6,6 +6,7 @@
 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
 
 #include <generated/utsrelease.h>
+#include <linux/crash_dump.h>
 #include "ice.h"
 #include "ice_base.h"
 #include "ice_lib.h"
@@ -5014,6 +5015,20 @@ ice_probe(struct pci_dev *pdev, const struct pci_device_id __always_unused *ent)
                return -EINVAL;
        }
 
+       /* when under a kdump kernel initiate a reset before enabling the
+        * device in order to clear out any pending DMA transactions. These
+        * transactions can cause some systems to machine check when doing
+        * the pcim_enable_device() below.
+        */
+       if (is_kdump_kernel()) {
+               pci_save_state(pdev);
+               pci_clear_master(pdev);
+               err = pcie_flr(pdev);
+               if (err)
+                       return err;
+               pci_restore_state(pdev);
+       }
+
        /* this driver uses devres, see
         * Documentation/driver-api/driver-model/devres.rst
         */