mtd: nand: xway: convert to normal platform driver

Instead of hacking this into the plat_nand driver just make this a
normal nand driver.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>

diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig
index 3c26e89..ee76f92 100644 (file)
--- a/drivers/mtd/nand/Kconfig
+++ b/drivers/mtd/nand/Kconfig
@@ -539,7 +539,6 @@ config MTD_NAND_FSMC
 config MTD_NAND_XWAY
        tristate "Support for NAND on Lantiq XWAY SoC"
        depends on LANTIQ && SOC_TYPE_XWAY
-       select MTD_NAND_PLATFORM
        help
          Enables support for NAND Flash chips on Lantiq XWAY SoCs. NAND is attached
          to the External Bus Unit (EBU).

diff --git a/drivers/mtd/nand/xway_nand.c b/drivers/mtd/nand/xway_nand.c
index 2d74637..ec189e5 100644 (file)
--- a/drivers/mtd/nand/xway_nand.c
+++ b/drivers/mtd/nand/xway_nand.c
@@ -4,6 +4,7 @@
  *  by the Free Software Foundation.
  *
  *  Copyright © 2012 John Crispin <blogic@openwrt.org>
+ *  Copyright © 2016 Hauke Mehrtens <hauke@hauke-m.de>
  */
 
 #include <linux/mtd/nand.h>
@@ -63,6 +64,10 @@
 #define NAND_CON_CSMUX         (1 << 1)
 #define NAND_CON_NANDM         1
 
+struct xway_nand_data {
+       struct nand_chip        chip;
+};
+
 static void xway_reset_chip(struct nand_chip *chip)
 {
        unsigned long nandaddr = (unsigned long) chip->IO_ADDR_W;
@@ -139,16 +144,51 @@ static unsigned char xway_read_byte(struct mtd_info *mtd)
        return ret;
 }
 
+/*
+ * Probe for the NAND device.
+ */
 static int xway_nand_probe(struct platform_device *pdev)
 {
-       struct nand_chip *this = platform_get_drvdata(pdev);
-       unsigned long nandaddr = (unsigned long) this->IO_ADDR_W;
-       const __be32 *cs = of_get_property(pdev->dev.of_node,
-                                       "lantiq,cs", NULL);
+       struct xway_nand_data *data;
+       struct mtd_info *mtd;
+       struct resource *res;
+       int err;
+       void __iomem *nandaddr;
+       u32 cs;
        u32 cs_flag = 0;
 
+       /* Allocate memory for the device structure (and zero it) */
+       data = devm_kzalloc(&pdev->dev, sizeof(struct xway_nand_data),
+                           GFP_KERNEL);
+       if (!data)
+               return -ENOMEM;
+
+       res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+       nandaddr = devm_ioremap_resource(&pdev->dev, res);
+       if (IS_ERR(nandaddr))
+               return PTR_ERR(nandaddr);
+
+       nand_set_flash_node(&data->chip, pdev->dev.of_node);
+       mtd = nand_to_mtd(&data->chip);
+       mtd->dev.parent = &pdev->dev;
+
+       data->chip.IO_ADDR_R = nandaddr;
+       data->chip.IO_ADDR_W = nandaddr;
+       data->chip.cmd_ctrl = xway_cmd_ctrl;
+       data->chip.dev_ready = xway_dev_ready;
+       data->chip.select_chip = xway_select_chip;
+       data->chip.read_byte = xway_read_byte;
+       data->chip.chip_delay = 30;
+
+       data->chip.ecc.mode = NAND_ECC_SOFT;
+       data->chip.ecc.algo = NAND_ECC_HAMMING;
+
+       platform_set_drvdata(pdev, data);
+       nand_set_controller_data(&data->chip, data);
+
        /* load our CS from the DT. Either we find a valid 1 or default to 0 */
-       if (cs && (*cs == 1))
+       err = of_property_read_u32(pdev->dev.of_node, "lantiq,cs", &cs);
+       if (!err && cs == 1)
                cs_flag = NAND_CON_IN_CS1 | NAND_CON_OUT_CS1;
 
        /* setup the EBU to run in NAND mode on our base addr */
@@ -164,43 +204,47 @@ static int xway_nand_probe(struct platform_device *pdev)
                | cs_flag, EBU_NAND_CON);
 
        /* finish with a reset */
-       xway_reset_chip(this);
+       xway_reset_chip(&data->chip);
 
-       return 0;
-}
+       /* Scan to find existence of the device */
+       err = nand_scan(mtd, 1);
+       if (err)
+               return err;
 
-static struct platform_nand_data xway_nand_data = {
-       .chip = {
-               .nr_chips               = 1,
-               .chip_delay             = 30,
-       },
-       .ctrl = {
-               .probe          = xway_nand_probe,
-               .cmd_ctrl       = xway_cmd_ctrl,
-               .dev_ready      = xway_dev_ready,
-               .select_chip    = xway_select_chip,
-               .read_byte      = xway_read_byte,
-       }
-};
+       err = mtd_device_register(mtd, NULL, 0);
+       if (err)
+               nand_release(mtd);
+
+       return err;
+}
 
 /*
- * Try to find the node inside the DT. If it is available attach out
- * platform_nand_data
+ * Remove a NAND device.
  */
-static int __init xway_register_nand(void)
+static int xway_nand_remove(struct platform_device *pdev)
 {
-       struct device_node *node;
-       struct platform_device *pdev;
-
-       node = of_find_compatible_node(NULL, NULL, "lantiq,nand-xway");
-       if (!node)
-               return -ENOENT;
-       pdev = of_find_device_by_node(node);
-       if (!pdev)
-               return -EINVAL;
-       pdev->dev.platform_data = &xway_nand_data;
-       of_node_put(node);
+       struct xway_nand_data *data = platform_get_drvdata(pdev);
+
+       nand_release(nand_to_mtd(&data->chip));
+
        return 0;
 }
 
-subsys_initcall(xway_register_nand);
+static const struct of_device_id xway_nand_match[] = {
+       { .compatible = "lantiq,nand-xway" },
+       {},
+};
+MODULE_DEVICE_TABLE(of, xway_nand_match);
+
+static struct platform_driver xway_nand_driver = {
+       .probe  = xway_nand_probe,
+       .remove = xway_nand_remove,
+       .driver = {
+               .name           = "lantiq,nand-xway",
+               .of_match_table = xway_nand_match,
+       },
+};
+
+module_platform_driver(xway_nand_driver);
+
+MODULE_LICENSE("GPL");