[ Upstream commit
87d0f2a5536fdf5053a6d341880f96135549a644 ]
This addresses deadlocks in these common cases in hierarchies containing
two switches:
- All involved ports are runtime suspended and they are unplugged. This
can happen easily if the drivers involved automatically enable runtime
PM (xHCI for example does that).
- System is suspended (e.g., closing the lid on a laptop) with a dock +
something else connected, and the dock is unplugged while suspended.
These cases lead to the following deadlock:
INFO: task irq/126-pciehp:198 blocked for more than 120 seconds.
irq/126-pciehp D 0 198 2 0x80000000
Call Trace:
schedule+0x2c/0x80
schedule_timeout+0x246/0x350
wait_for_completion+0xb7/0x140
kthread_stop+0x49/0x110
free_irq+0x32/0x70
pcie_shutdown_notification+0x2f/0x50
pciehp_remove+0x27/0x50
pcie_port_remove_service+0x36/0x50
device_release_driver+0x12/0x20
bus_remove_device+0xec/0x160
device_del+0x13b/0x350
device_unregister+0x1a/0x60
remove_iter+0x1e/0x30
device_for_each_child+0x56/0x90
pcie_port_device_remove+0x22/0x40
pcie_portdrv_remove+0x20/0x60
pci_device_remove+0x3e/0xc0
device_release_driver_internal+0x18c/0x250
device_release_driver+0x12/0x20
pci_stop_bus_device+0x6f/0x90
pci_stop_bus_device+0x31/0x90
pci_stop_and_remove_bus_device+0x12/0x20
pciehp_unconfigure_device+0x88/0x140
pciehp_disable_slot+0x6a/0x110
pciehp_handle_presence_or_link_change+0x263/0x400
pciehp_ist+0x1c9/0x1d0
irq_thread_fn+0x24/0x60
irq_thread+0xeb/0x190
kthread+0x120/0x140
INFO: task irq/190-pciehp:2288 blocked for more than 120 seconds.
irq/190-pciehp D 0 2288 2 0x80000000
Call Trace:
__schedule+0x2a2/0x880
schedule+0x2c/0x80
schedule_preempt_disabled+0xe/0x10
mutex_lock+0x2c/0x30
pci_lock_rescan_remove+0x15/0x20
pciehp_unconfigure_device+0x4d/0x140
pciehp_disable_slot+0x6a/0x110
pciehp_handle_presence_or_link_change+0x263/0x400
pciehp_ist+0x1c9/0x1d0
irq_thread_fn+0x24/0x60
irq_thread+0xeb/0x190
kthread+0x120/0x140
What happens here is that the whole hierarchy is runtime resumed and the
parent PCIe downstream port, which got the hot-remove event, starts
removing devices below it, taking pci_lock_rescan_remove() lock. When the
child PCIe port is runtime resumed it calls pciehp_check_presence() which
ends up calling pciehp_card_present() and pciehp_check_link_active(). Both
of these use pcie_capability_read_word(), which notices that the underlying
device is already gone and returns PCIBIOS_DEVICE_NOT_FOUND with the
capability value set to 0. When pciehp gets this value it thinks that its
child device is also hot-removed and schedules its IRQ thread to handle the
event.
The deadlock happens when the child's IRQ thread runs and tries to acquire
pci_lock_rescan_remove() which is already taken by the parent and the
parent waits for the child's IRQ thread to finish.
Prevent this from happening by checking the return value of
pcie_capability_read_word() and if it is PCIBIOS_DEVICE_NOT_FOUND stop
performing any hot-removal activities.
[bhelgaas: add common scenarios to commit log]
Link: https://lore.kernel.org/r/20191029170022.57528-2-mika.westerberg@linux.intel.com
Tested-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
void pciehp_get_latch_status(struct controller *ctrl, u8 *status);
int pciehp_query_power_fault(struct controller *ctrl);
-bool pciehp_card_present(struct controller *ctrl);
-bool pciehp_card_present_or_link_active(struct controller *ctrl);
+int pciehp_card_present(struct controller *ctrl);
+int pciehp_card_present_or_link_active(struct controller *ctrl);
int pciehp_check_link_status(struct controller *ctrl);
-bool pciehp_check_link_active(struct controller *ctrl);
+int pciehp_check_link_active(struct controller *ctrl);
void pciehp_release_ctrl(struct controller *ctrl);
int pciehp_sysfs_enable_slot(struct hotplug_slot *hotplug_slot);
{
struct controller *ctrl = to_ctrl(hotplug_slot);
struct pci_dev *pdev = ctrl->pcie->port;
+ int ret;
pci_config_pm_runtime_get(pdev);
- *value = pciehp_card_present_or_link_active(ctrl);
+ ret = pciehp_card_present_or_link_active(ctrl);
pci_config_pm_runtime_put(pdev);
+ if (ret < 0)
+ return ret;
+
+ *value = ret;
return 0;
}
*/
static void pciehp_check_presence(struct controller *ctrl)
{
- bool occupied;
+ int occupied;
down_read(&ctrl->reset_lock);
mutex_lock(&ctrl->state_lock);
occupied = pciehp_card_present_or_link_active(ctrl);
- if ((occupied && (ctrl->state == OFF_STATE ||
+ if ((occupied > 0 && (ctrl->state == OFF_STATE ||
ctrl->state == BLINKINGON_STATE)) ||
(!occupied && (ctrl->state == ON_STATE ||
ctrl->state == BLINKINGOFF_STATE)))
void pciehp_handle_presence_or_link_change(struct controller *ctrl, u32 events)
{
- bool present, link_active;
+ int present, link_active;
/*
* If the slot is on and presence or link has changed, turn it off.
mutex_lock(&ctrl->state_lock);
present = pciehp_card_present(ctrl);
link_active = pciehp_check_link_active(ctrl);
- if (!present && !link_active) {
+ if (present <= 0 && link_active <= 0) {
mutex_unlock(&ctrl->state_lock);
return;
}
pcie_do_write_cmd(ctrl, cmd, mask, false);
}
-bool pciehp_check_link_active(struct controller *ctrl)
+/**
+ * pciehp_check_link_active() - Is the link active
+ * @ctrl: PCIe hotplug controller
+ *
+ * Check whether the downstream link is currently active. Note it is
+ * possible that the card is removed immediately after this so the
+ * caller may need to take it into account.
+ *
+ * If the hotplug controller itself is not available anymore returns
+ * %-ENODEV.
+ */
+int pciehp_check_link_active(struct controller *ctrl)
{
struct pci_dev *pdev = ctrl_dev(ctrl);
u16 lnk_status;
- bool ret;
+ int ret;
- pcie_capability_read_word(pdev, PCI_EXP_LNKSTA, &lnk_status);
- ret = !!(lnk_status & PCI_EXP_LNKSTA_DLLLA);
+ ret = pcie_capability_read_word(pdev, PCI_EXP_LNKSTA, &lnk_status);
+ if (ret == PCIBIOS_DEVICE_NOT_FOUND || lnk_status == (u16)~0)
+ return -ENODEV;
- if (ret)
- ctrl_dbg(ctrl, "%s: lnk_status = %x\n", __func__, lnk_status);
+ ret = !!(lnk_status & PCI_EXP_LNKSTA_DLLLA);
+ ctrl_dbg(ctrl, "%s: lnk_status = %x\n", __func__, lnk_status);
return ret;
}
*status = !!(slot_status & PCI_EXP_SLTSTA_MRLSS);
}
-bool pciehp_card_present(struct controller *ctrl)
+/**
+ * pciehp_card_present() - Is the card present
+ * @ctrl: PCIe hotplug controller
+ *
+ * Function checks whether the card is currently present in the slot and
+ * in that case returns true. Note it is possible that the card is
+ * removed immediately after the check so the caller may need to take
+ * this into account.
+ *
+ * It the hotplug controller itself is not available anymore returns
+ * %-ENODEV.
+ */
+int pciehp_card_present(struct controller *ctrl)
{
struct pci_dev *pdev = ctrl_dev(ctrl);
u16 slot_status;
+ int ret;
- pcie_capability_read_word(pdev, PCI_EXP_SLTSTA, &slot_status);
- return slot_status & PCI_EXP_SLTSTA_PDS;
+ ret = pcie_capability_read_word(pdev, PCI_EXP_SLTSTA, &slot_status);
+ if (ret == PCIBIOS_DEVICE_NOT_FOUND || slot_status == (u16)~0)
+ return -ENODEV;
+
+ return !!(slot_status & PCI_EXP_SLTSTA_PDS);
}
/**
* Presence Detect State bit, this helper also returns true if the Link Active
* bit is set. This is a concession to broken hotplug ports which hardwire
* Presence Detect State to zero, such as Wilocity's [1ae9:0200].
+ *
+ * Returns: %1 if the slot is occupied and %0 if it is not. If the hotplug
+ * port is not present anymore returns %-ENODEV.
*/
-bool pciehp_card_present_or_link_active(struct controller *ctrl)
+int pciehp_card_present_or_link_active(struct controller *ctrl)
{
- return pciehp_card_present(ctrl) || pciehp_check_link_active(ctrl);
+ int ret;
+
+ ret = pciehp_card_present(ctrl);
+ if (ret)
+ return ret;
+
+ return pciehp_check_link_active(ctrl);
}
int pciehp_query_power_fault(struct controller *ctrl)