First check the presence of the ipu firmware in the boot partition.
If present enable the ipu and the related clocks & then move
on to load the firmware and eventually start remoteproc IPU1/IPU2.
do_enable_clocks by default puts the clock domains into auto
which does not work well with reset. Hence adding do_enable_ipu_clocks
function.
Signed-off-by: Keerthy <j-keerthy@ti.com>
[Amjad: fix IPU1_LOAD_ADDR and compile warnings]
Signed-off-by: Amjad Ouled-Ameur <aouledameur@baylibre.com>
#define HSMMC_CLKCTRL_CLKSEL_MASK (1 << 24)
#define HSMMC_CLKCTRL_CLKSEL_DIV_MASK (3 << 25)
+/* CM_IPU1_IPU1_CLKCTRL CLKSEL MASK */
+#define IPU1_CLKCTRL_CLKSEL_MASK BIT(24)
+
/* CM_L3INIT_SATA_CLKCTRL */
#define SATA_CLKCTRL_OPTFCLKEN_MASK (1 << 8)
/* IPU */
u32 cm_ipu_clkstctrl;
u32 cm_ipu_i2c5_clkctrl;
+ u32 cm_ipu1_clkstctrl;
+ u32 cm_ipu1_ipu1_clkctrl;
+ u32 cm_ipu2_clkstctrl;
+ u32 cm_ipu2_ipu2_clkctrl;
/*l3main1 edma*/
u32 cm_l3main1_tptc1_clkctrl;
u8 wait_for_disable);
#endif /* CONFIG_OMAP44XX || CONFIG_OMAP54XX */
+void do_enable_ipu_clocks(u32 const *clk_domains,
+ u32 const *clk_modules_hw_auto,
+ u32 const *clk_modules_explicit_en,
+ u8 wait_for_enable);
+void enable_ipu1_clocks(void);
+void enable_ipu2_clocks(void);
void setup_post_dividers(u32 const base,
const struct dpll_params *params);
u32 omap_ddr_clk(void);
#include <common.h>
#include <ahci.h>
#include <log.h>
+#include <dm/uclass.h>
+#include <fs_loader.h>
#include <spl.h>
#include <asm/global_data.h>
#include <asm/omap_common.h>
#include <watchdog.h>
#include <scsi.h>
#include <i2c.h>
+#include <remoteproc.h>
DECLARE_GLOBAL_DATA_PTR;
+#define IPU1_LOAD_ADDR (0xa17ff000)
+#define MAX_REMOTECORE_BIN_SIZE (8 * 0x100000)
+#define IPU2_LOAD_ADDR (IPU1_LOAD_ADDR + MAX_REMOTECORE_BIN_SIZE)
+
__weak u32 omap_sys_boot_device(void)
{
return BOOT_DEVICE_NONE;
return gd->arch.omap_boot_mode;
}
+int load_firmware(char *name_fw, u32 *loadaddr)
+{
+ struct udevice *fsdev;
+ int size = 0;
+
+ if (!IS_ENABLED(CONFIG_FS_LOADER))
+ return 0;
+
+ if (!*loadaddr)
+ return 0;
+
+ if (!uclass_get_device(UCLASS_FS_FIRMWARE_LOADER, 0, &fsdev)) {
+ size = request_firmware_into_buf(fsdev, name_fw,
+ (void *)*loadaddr, 0, 0);
+ }
+
+ return size;
+}
+
+void spl_boot_ipu(void)
+{
+ int ret, size;
+ u32 loadaddr = IPU1_LOAD_ADDR;
+
+ if (!IS_ENABLED(CONFIG_SPL_BUILD) ||
+ !IS_ENABLED(CONFIG_REMOTEPROC_TI_IPU))
+ return;
+
+ size = load_firmware("dra7-ipu1-fw.xem4", &loadaddr);
+ if (size <= 0) {
+ pr_err("Firmware loading failed\n");
+ goto skip_ipu1;
+ }
+
+ enable_ipu1_clocks();
+ ret = rproc_dev_init(0);
+ if (ret) {
+ debug("%s: IPU1 failed to initialize on rproc (%d)\n",
+ __func__, ret);
+ goto skip_ipu1;
+ }
+
+ ret = rproc_load(0, IPU1_LOAD_ADDR, 0x2000000);
+ if (ret) {
+ debug("%s: IPU1 failed to load on rproc (%d)\n", __func__,
+ ret);
+ goto skip_ipu1;
+ }
+
+ debug("Starting IPU1...\n");
+
+ ret = rproc_start(0);
+ if (ret)
+ debug("%s: IPU1 failed to start (%d)\n", __func__, ret);
+
+skip_ipu1:
+ loadaddr = IPU2_LOAD_ADDR;
+ size = load_firmware("dra7-ipu2-fw.xem4", &loadaddr);
+ if (size <= 0) {
+ pr_err("Firmware loading failed for ipu2\n");
+ return;
+ }
+
+ enable_ipu2_clocks();
+ ret = rproc_dev_init(1);
+ if (ret) {
+ debug("%s: IPU2 failed to initialize on rproc (%d)\n", __func__,
+ ret);
+ return;
+ }
+
+ ret = rproc_load(1, IPU2_LOAD_ADDR, 0x2000000);
+ if (ret) {
+ debug("%s: IPU2 failed to load on rproc (%d)\n", __func__,
+ ret);
+ return;
+ }
+
+ debug("Starting IPU2...\n");
+
+ ret = rproc_start(1);
+ if (ret)
+ debug("%s: IPU2 failed to start (%d)\n", __func__, ret);
+}
+
void spl_board_init(void)
{
/* Prepare console output */
#ifdef CONFIG_AM33XX
am33xx_spl_board_init();
#endif
+ if (IS_ENABLED(CONFIG_SPL_BUILD) &&
+ IS_ENABLED(CONFIG_REMOTEPROC_TI_IPU))
+ spl_boot_ipu();
}
void __noreturn jump_to_image_no_args(struct spl_image_info *spl_image)
}
}
+void do_enable_ipu_clocks(u32 const *clk_domains,
+ u32 const *clk_modules_hw_auto,
+ u32 const *clk_modules_explicit_en,
+ u8 wait_for_enable)
+{
+ u32 i, max = 10;
+
+ if (!IS_ENABLED(CONFIG_REMOTEPROC_TI_IPU))
+ return;
+
+ /* Put the clock domains in SW_WKUP mode */
+ for (i = 0; (i < max) && clk_domains && clk_domains[i]; i++) {
+ enable_clock_domain(clk_domains[i],
+ CD_CLKCTRL_CLKTRCTRL_SW_WKUP);
+ }
+
+ /* Clock modules that need to be put in HW_AUTO */
+ for (i = 0; (i < max) && clk_modules_hw_auto &&
+ clk_modules_hw_auto[i]; i++) {
+ enable_clock_module(clk_modules_hw_auto[i],
+ MODULE_CLKCTRL_MODULEMODE_HW_AUTO,
+ wait_for_enable);
+ };
+
+ /* Clock modules that need to be put in SW_EXPLICIT_EN mode */
+ for (i = 0; (i < max) && clk_modules_explicit_en &&
+ clk_modules_explicit_en[i]; i++) {
+ enable_clock_module(clk_modules_explicit_en[i],
+ MODULE_CLKCTRL_MODULEMODE_SW_EXPLICIT_EN,
+ wait_for_enable);
+ };
+}
+
void do_disable_clocks(u32 const *clk_domains,
u32 const *clk_modules_disable,
u8 wait_for_disable)
};
/*
+ * Enable IPU1 clock domains, modules and
+ * do some additional special settings needed
+ */
+void enable_ipu1_clocks(void)
+{
+ if (!IS_ENABLED(CONFIG_DRA7XX) ||
+ !IS_ENABLED(CONFIG_REMOTEPROC_TI_IPU))
+ return;
+
+ u32 const clk_domains[] = {
+ (*prcm)->cm_ipu_clkstctrl,
+ (*prcm)->cm_ipu1_clkstctrl,
+ 0
+ };
+
+ u32 const clk_modules_hw_auto_essential[] = {
+ (*prcm)->cm_ipu1_ipu1_clkctrl,
+ 0
+ };
+
+ u32 const clk_modules_explicit_en_essential[] = {
+ (*prcm)->cm_l4per_gptimer11_clkctrl,
+ (*prcm)->cm1_abe_timer7_clkctrl,
+ (*prcm)->cm1_abe_timer8_clkctrl,
+ 0
+ };
+ do_enable_ipu_clocks(clk_domains, clk_modules_hw_auto_essential,
+ clk_modules_explicit_en_essential, 0);
+
+ /* Enable optional additional functional clock for IPU1 */
+ setbits_le32((*prcm)->cm_ipu1_ipu1_clkctrl,
+ IPU1_CLKCTRL_CLKSEL_MASK);
+ /* Enable optional additional functional clock for IPU1 */
+ setbits_le32((*prcm)->cm1_abe_timer7_clkctrl,
+ IPU1_CLKCTRL_CLKSEL_MASK);
+ /* Enable optional additional functional clock for IPU1 */
+ setbits_le32((*prcm)->cm1_abe_timer8_clkctrl,
+ IPU1_CLKCTRL_CLKSEL_MASK);
+}
+
+/*
+ * Enable IPU2 clock domains, modules and
+ * do some additional special settings needed
+ */
+void enable_ipu2_clocks(void)
+{
+ if (!IS_ENABLED(CONFIG_DRA7XX) ||
+ !IS_ENABLED(CONFIG_REMOTEPROC_TI_IPU))
+ return;
+
+ u32 const clk_domains[] = {
+ (*prcm)->cm_ipu_clkstctrl,
+ (*prcm)->cm_ipu2_clkstctrl,
+ 0
+ };
+
+ u32 const clk_modules_hw_auto_essential[] = {
+ (*prcm)->cm_ipu2_ipu2_clkctrl,
+ 0
+ };
+
+ u32 const clk_modules_explicit_en_essential[] = {
+ (*prcm)->cm_l4per_gptimer3_clkctrl,
+ (*prcm)->cm_l4per_gptimer4_clkctrl,
+ (*prcm)->cm_l4per_gptimer9_clkctrl,
+ 0
+ };
+ do_enable_ipu_clocks(clk_domains, clk_modules_hw_auto_essential,
+ clk_modules_explicit_en_essential, 0);
+
+ /* Enable optional additional functional clock for IPU2 */
+ setbits_le32((*prcm)->cm_l4per_gptimer4_clkctrl,
+ IPU1_CLKCTRL_CLKSEL_MASK);
+ /* Enable optional additional functional clock for IPU2 */
+ setbits_le32((*prcm)->cm_l4per_gptimer9_clkctrl,
+ IPU1_CLKCTRL_CLKSEL_MASK);
+}
+
+/*
* Enable essential clock domains, modules and
* do some additional special settings needed
*/
void enable_basic_uboot_clocks(void)
{
- u32 const clk_domains_essential[] = {
-#if defined(CONFIG_DRA7XX)
- (*prcm)->cm_ipu_clkstctrl,
-#endif
- 0
- };
+ u32 cm_ipu_clkstctrl = 0;
+
+ if (IS_ENABLED(CONFIG_DRA7XX) &&
+ !IS_ENABLED(CONFIG_REMOTEPROC_TI_IPU))
+ cm_ipu_clkstctrl = (*prcm)->cm_ipu_clkstctrl;
+
+ u32 const clk_domains_essential[] = {cm_ipu_clkstctrl, 0};
u32 const clk_modules_hw_auto_essential[] = {
(*prcm)->cm_l3init_hsusbtll_clkctrl,
/* cm IPU */
.cm_ipu_clkstctrl = 0x4a005540,
.cm_ipu_i2c5_clkctrl = 0x4a005578,
-
+ .cm_ipu1_clkstctrl = 0x4a005500,
+ .cm_ipu1_ipu1_clkctrl = 0x4a005520,
+ .cm_ipu2_clkstctrl = 0x4a008900,
+ .cm_ipu2_ipu2_clkctrl = 0x4a008920,
/* prm irqstatus regs */
.prm_irqstatus_mpu = 0x4ae06010,
.prm_irqstatus_mpu_2 = 0x4ae06014,
/*l3main1 edma*/
.cm_l3main1_tptc1_clkctrl = 0x4a008778,
.cm_l3main1_tptc2_clkctrl = 0x4a008780,
+
+ /* cm1.abe */
+ .cm1_abe_timer7_clkctrl = 0x4a005568,
+ .cm1_abe_timer8_clkctrl = 0x4a005570,
};
void clrset_spare_register(u8 spare_type, u32 clear_bits, u32 set_bits)
projects / platform / kernel / u-boot.git / commitdiff