powerpc: Drop configs/manroland
authorSimon Glass <sjg@chromium.org>
Thu, 27 Apr 2017 04:28:10 +0000 (22:28 -0600)
committerTom Rini <trini@konsulko.com>
Sun, 30 Apr 2017 17:41:02 +0000 (13:41 -0400)
This is not used in U-Boot. Drop it.

Signed-off-by: Simon Glass <sjg@chromium.org>
include/configs/manroland/common.h [deleted file]
include/configs/manroland/mpc5200-common.h [deleted file]

diff --git a/include/configs/manroland/common.h b/include/configs/manroland/common.h
deleted file mode 100644 (file)
index 7d63e14..0000000
+++ /dev/null
@@ -1,106 +0,0 @@
-/*
- * (C) Copyright 2009
- * Heiko Schocher, DENX Software Engineering, hs@denx.de.
- *
- * SPDX-License-Identifier:    GPL-2.0+
- */
-
-#ifndef __MANROLAND_COMMON_H
-#define __MANROLAND_COMMON_H
-
-/*
- * High Level Configuration Options
- * (easy to change)
- */
-
-#define CONFIG_BOARD_EARLY_INIT_R
-
-/*
- * Command line configuration.
- */
-#define CONFIG_CMD_DATE
-#define CONFIG_CMD_EEPROM
-#define CONFIG_CMD_DTT
-#define CONFIG_CMD_IDE
-
-/*
- * 8-symbol LED display (can be accessed with 'display' command)
- */
-#define CONFIG_PDSP188x
-
-#define        CONFIG_TIMESTAMP        1       /* Print image info with timestamp */
-
-/*
- * Autobooting
- */
-
-#define CONFIG_PREBOOT "echo;" \
-       "echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;" \
-       "echo"
-
-#undef CONFIG_BOOTARGS
-
-#define CONFIG_EXTRA_ENV_SETTINGS                                      \
-       "netdev=eth0\0"                                                 \
-       "nfsargs=setenv bootargs root=/dev/nfs rw "                     \
-               "nfsroot=${serverip}:${rootpath}\0"                     \
-       "ramargs=setenv bootargs root=/dev/ram rw\0"                    \
-       "addwdt=setenv bootargs ${bootargs} wdt=off\0"                  \
-       "logval=4\0"                                                    \
-       "addlog=setenv bootargs ${bootargs} loglevel=${logval}\0"       \
-       "addip=setenv bootargs ${bootargs} "                            \
-               "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}"      \
-               ":${hostname}:${netdev}:off panic=1\0"                  \
-       "kernel_addr=ff810000\0"                                        \
-       "fdt_addr="__stringify(CONFIG_SYS_FLASH_BASE)"\0"               \
-       "flash_nfs=run nfsargs addip addcon addwdt addlog;"             \
-               "bootm ${kernel_addr} - ${fdt_addr}\0"                  \
-       "rootpath=/opt/eldk/ppc_82xx\0"                                 \
-       "kernel_addr_r=300000\0"                                        \
-       "fdt_addr_r=200000\0"                                           \
-       "fdt_file=" __stringify(CONFIG_HOSTNAME) "/"                    \
-               __stringify(CONFIG_HOSTNAME) ".dtb\0"                   \
-       "kernel_file=" __stringify(CONFIG_HOSTNAME) "/uImage \0"        \
-       "load_fdt=tftp ${fdt_addr_r} ${fdt_file};\0"                    \
-       "load_kernel=tftp ${kernel_addr_r} ${kernel_file};\0"           \
-       "addcon=setenv bootargs ${bootargs} console=ttyPSC0,${baudrate}\0"\
-       "net_nfs=run load_fdt load_kernel; "                            \
-               "run nfsargs addip addcon addwdt addlog;"               \
-               "bootm ${kernel_addr_r} - ${fdt_addr_r}\0"              \
-       "u-boot=" __stringify(CONFIG_HOSTNAME) "/u-boot.bin \0"         \
-       "u-boot_addr_r=200000\0"                                        \
-       "load=tftp ${u-boot_addr_r} ${u-boot}\0"                        \
-       "update=protect off " __stringify(CONFIG_SYS_TEXT_BASE) " +${filesize};"\
-               "erase " __stringify(CONFIG_SYS_TEXT_BASE) " +${filesize};"\
-               "cp.b ${u-boot_addr_r} " __stringify(CONFIG_SYS_TEXT_BASE) \
-               " ${filesize};"                                         \
-               "protect on " __stringify(CONFIG_SYS_TEXT_BASE) " +${filesize}\0"\
-       ""
-
-#define CONFIG_BOOTCOMMAND     "run net_nfs"
-
-#define CONFIG_MISC_INIT_R     1
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_LONGHELP                    /* undef to save memory     */
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_SYS_CBSIZE              1024    /* Console I/O Buffer Size  */
-#else
-#define CONFIG_SYS_CBSIZE              256     /* Console I/O Buffer Size  */
-#endif
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
-#define CONFIG_SYS_MAXARGS             16      /* max number of command args*/
-#define CONFIG_SYS_BARGSIZE            CONFIG_SYS_CBSIZE
-#define CONFIG_CMDLINE_EDITING         1       /* add command line history */
-#define CONFIG_AUTO_COMPLETE           /* add autocompletion support   */
-
-/* Enable an alternate, more extensive memory test */
-#define CONFIG_SYS_ALT_MEMTEST
-
-/*
- * Enable loopw command.
- */
-
-#endif /* __MANROLAND_COMMON_H */
diff --git a/include/configs/manroland/mpc5200-common.h b/include/configs/manroland/mpc5200-common.h
deleted file mode 100644 (file)
index 60e8716..0000000
+++ /dev/null
@@ -1,205 +0,0 @@
-/*
- * (C) Copyright 2009
- * Heiko Schocher, DENX Software Engineering, hs@denx.de.
- *
- * SPDX-License-Identifier:    GPL-2.0+
- */
-
-#ifndef __MANROLAND_MPC52XX__COMMON_H
-#define __MANROLAND_MPC52XX__COMMON_H
-
-/*
- * High Level Configuration Options
- * (easy to change)
- */
-#define CONFIG_MPC5200         1       /* MPC5200 CPU */
-
-#define CONFIG_SYS_MPC5XXX_CLKIN       33000000 /* ... running at 33.000000MHz */
-
-#define CONFIG_HIGH_BATS       1       /* High BATs supported                  */
-
-/*
- * Serial console configuration
- */
-#define CONFIG_PSC_CONSOLE     1       /* console is on PSC1   */
-#define CONFIG_SYS_BAUDRATE_TABLE      { 9600, 19200, 38400, 57600, 115200,\
-                                        230400 }
-
-#if (CONFIG_SYS_TEXT_BASE == 0xFFF00000) /* Boot low */
-#   define CONFIG_SYS_LOWBOOT          1
-#endif
-
-/*
- * IPB Bus clocking configuration.
- */
-#define CONFIG_SYS_IPBCLK_EQUALS_XLBCLK                /* define for 133MHz speed */
-
-/*
- * I2C configuration
- */
-#define CONFIG_HARD_I2C                1       /* I2C with hardware support */
-#define CONFIG_SYS_I2C_MODULE          2       /* Select I2C module #1 or #2 */
-
-#define CONFIG_SYS_I2C_SPEED           100000 /* 100 kHz */
-#define CONFIG_SYS_I2C_SLAVE           0x7F
-
-/*
- * EEPROM configuration
- */
-#define CONFIG_SYS_I2C_EEPROM_ADDR             0x58
-#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN         1
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS      4
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS  10
-
-/*
- * RTC configuration
- */
-#define CONFIG_RTC_PCF8563
-#define CONFIG_SYS_I2C_RTC_ADDR                0x51
-
-/* I2C SYSMON (LM75) */
-#define CONFIG_DTT_LM81                        1       /* ON Semi's LM75       */
-#define CONFIG_DTT_SENSORS             {0}     /* Sensor addresses     */
-#define CONFIG_SYS_DTT_MAX_TEMP                70
-#define CONFIG_SYS_DTT_LOW_TEMP                -30
-#define CONFIG_SYS_DTT_HYSTERESIS              3
-
-/*
- * Flash configuration
- */
-#define CONFIG_SYS_FLASH_BASE          0xFF800000
-
-#define CONFIG_SYS_FLASH_SIZE          0x00800000 /* 8 MByte */
-
-#define CONFIG_ENV_ADDR                (CONFIG_SYS_TEXT_BASE+0x40000) /* second sector */
-#define CONFIG_SYS_MAX_FLASH_BANKS     1       /* max num of flash banks
-                                          (= chip selects) */
-#define CONFIG_SYS_FLASH_ERASE_TOUT    240000  /* Flash Erase Timeout [ms]*/
-#define CONFIG_SYS_FLASH_WRITE_TOUT    500     /* Flash Write Timeout [ms]*/
-
-#define CONFIG_FLASH_CFI_DRIVER
-#define CONFIG_SYS_FLASH_CFI
-#define CONFIG_SYS_FLASH_EMPTY_INFO
-#define CONFIG_SYS_FLASH_CFI_AMD_RESET
-
-/*
- * Environment settings
- */
-#define CONFIG_ENV_IS_IN_FLASH 1
-#define CONFIG_ENV_SIZE                0x4000
-#define CONFIG_ENV_OFFSET_REDUND   (CONFIG_ENV_OFFSET+CONFIG_ENV_SECT_SIZE)
-#define CONFIG_ENV_SIZE_REDUND     (CONFIG_ENV_SIZE)
-
-/*
- * Memory map
- */
-#define CONFIG_SYS_MBAR                0xF0000000
-#define CONFIG_SYS_DEFAULT_MBAR        0x80000000
-
-#define CONFIG_SYS_GBL_DATA_OFFSET     (CONFIG_SYS_INIT_RAM_SIZE -\
-                                        GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_OFFSET      CONFIG_SYS_GBL_DATA_OFFSET
-
-#define CONFIG_SYS_SDRAM_BASE          0x00000000
-#define CONFIG_SYS_SRAM_BASE   0x80100000      /* CS 1 */
-#define CONFIG_SYS_DISPLAY_BASE        0x80600000      /* CS 3 */
-
-/* Settings for XLB = 132 MHz */
-#define SDRAM_DDR       1
-#define SDRAM_MODE      0x018D0000
-#define SDRAM_EMODE     0x40090000
-#define SDRAM_CONTROL   0x714f0f00
-#define SDRAM_CONFIG1   0x73722930
-#define SDRAM_CONFIG2   0x47770000
-#define SDRAM_TAPDELAY  0x10000000
-
-/* Use ON-Chip SRAM until RAM will be available */
-#define CONFIG_SYS_INIT_RAM_ADDR       MPC5XXX_SRAM
-#ifdef CONFIG_POST
-/* preserve space for the post_word at end of on-chip SRAM */
-#define CONFIG_SYS_INIT_RAM_SIZE       MPC5XXX_SRAM_POST_SIZE
-#else
-#define CONFIG_SYS_INIT_RAM_SIZE       MPC5XXX_SRAM_SIZE
-#endif
-
-#define CONFIG_SYS_MONITOR_BASE    CONFIG_SYS_TEXT_BASE
-#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
-#   define CONFIG_SYS_RAMBOOT          1
-#endif
-
-#define CONFIG_SYS_MONITOR_LEN         (192 << 10)
-#define CONFIG_SYS_MALLOC_LEN          (512 << 10)
-#define CONFIG_SYS_BOOTMAPSZ           (8 << 20)
-
-/*
- * Ethernet configuration
- */
-#define CONFIG_MPC5xxx_FEC     1
-#define CONFIG_MPC5xxx_FEC_MII100
-#define CONFIG_PHY_ADDR                0x00
-#define CONFIG_MII             1
-
-/*use  Hardware WDT */
-#define CONFIG_HW_WATCHDOG
-
-#define CONFIG_SYS_CACHELINE_SIZE      32      /* For MPC5xxx CPUs             */
-#if defined(CONFIG_CMD_KGDB)
-#  define CONFIG_SYS_CACHELINE_SHIFT   5       /* log base 2 of the above value*/
-#endif
-
-/*
- * Various low-level settings
- */
-#define CONFIG_SYS_HID0_INIT           HID0_ICE | HID0_ICFI
-#define CONFIG_SYS_HID0_FINAL          HID0_ICE
-
-#define CONFIG_SYS_BOOTCS_START        CONFIG_SYS_FLASH_BASE
-#define CONFIG_SYS_BOOTCS_SIZE         CONFIG_SYS_FLASH_SIZE
-#define CONFIG_SYS_CS0_START           CONFIG_SYS_FLASH_BASE
-#define CONFIG_SYS_CS0_SIZE            CONFIG_SYS_FLASH_SIZE
-
-/* 8Mbit SRAM @0x80100000 */
-#define CONFIG_SYS_CS1_START           CONFIG_SYS_SRAM_BASE
-
-#define CONFIG_SYS_CS_BURST            0x00000000
-#define CONFIG_SYS_CS_DEADCYCLE        0x33333333
-
-/*-----------------------------------------------------------------------
- * IDE/ATA stuff Supports IDE harddisk
- *-----------------------------------------------------------------------
- */
-
-#undef  CONFIG_IDE_8xx_PCCARD          /* Use IDE with PC Card Adapter */
-
-#undef CONFIG_IDE_8xx_DIRECT           /* Direct IDE    not supported  */
-#undef CONFIG_IDE_LED                  /* LED   for ide not supported  */
-
-#define CONFIG_SYS_IDE_MAXBUS          1       /* max. 1 IDE bus       */
-
-#define CONFIG_IDE_PREINIT     1
-
-#define CONFIG_SYS_ATA_IDE0_OFFSET     0x0000
-
-#define CONFIG_SYS_ATA_BASE_ADDR       MPC5XXX_ATA
-
-/* Offset for data I/O                 */
-#define CONFIG_SYS_ATA_DATA_OFFSET     (0x0060)
-
-/* Offset for normal register accesses */
-#define CONFIG_SYS_ATA_REG_OFFSET      (CONFIG_SYS_ATA_DATA_OFFSET)
-
-/* Offset for alternate registers      */
-#define CONFIG_SYS_ATA_ALT_OFFSET      (0x005C)
-
-/* Interval between registers  */
-#define CONFIG_SYS_ATA_STRIDE          4
-
-#define CONFIG_ATAPI            1
-
-#define OF_CPU                 "PowerPC,5200@0"
-#define OF_SOC                 "soc5200@f0000000"
-#define OF_TBCLK               (bd->bi_busfreq / 4)
-#define OF_STDOUT_PATH         "/soc5200@f0000000/serial@2000"
-#define CONFIG_OF_IDE_FIXUP
-
-#endif /* __MANROLAND_MPC52XX__COMMON_H */