net: phy: micrel: use BIT macro

Use BIT macro for bitmask definitions.

Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

diff --git a/drivers/net/phy/micrel.c b/drivers/net/phy/micrel.c
index 62ca961..d962a28 100644 (file)
--- a/drivers/net/phy/micrel.c
+++ b/drivers/net/phy/micrel.c
@@ -30,30 +30,30 @@
 
 /* Operation Mode Strap Override */
 #define MII_KSZPHY_OMSO                                0x16
-#define KSZPHY_OMSO_B_CAST_OFF                 (1 << 9)
-#define KSZPHY_OMSO_RMII_OVERRIDE              (1 << 1)
-#define KSZPHY_OMSO_MII_OVERRIDE               (1 << 0)
+#define KSZPHY_OMSO_B_CAST_OFF                 BIT(9)
+#define KSZPHY_OMSO_RMII_OVERRIDE              BIT(1)
+#define KSZPHY_OMSO_MII_OVERRIDE               BIT(0)
 
 /* general Interrupt control/status reg in vendor specific block. */
 #define MII_KSZPHY_INTCS                       0x1B
-#define        KSZPHY_INTCS_JABBER                     (1 << 15)
-#define        KSZPHY_INTCS_RECEIVE_ERR                (1 << 14)
-#define        KSZPHY_INTCS_PAGE_RECEIVE               (1 << 13)
-#define        KSZPHY_INTCS_PARELLEL                   (1 << 12)
-#define        KSZPHY_INTCS_LINK_PARTNER_ACK           (1 << 11)
-#define        KSZPHY_INTCS_LINK_DOWN                  (1 << 10)
-#define        KSZPHY_INTCS_REMOTE_FAULT               (1 << 9)
-#define        KSZPHY_INTCS_LINK_UP                    (1 << 8)
+#define        KSZPHY_INTCS_JABBER                     BIT(15)
+#define        KSZPHY_INTCS_RECEIVE_ERR                BIT(14)
+#define        KSZPHY_INTCS_PAGE_RECEIVE               BIT(13)
+#define        KSZPHY_INTCS_PARELLEL                   BIT(12)
+#define        KSZPHY_INTCS_LINK_PARTNER_ACK           BIT(11)
+#define        KSZPHY_INTCS_LINK_DOWN                  BIT(10)
+#define        KSZPHY_INTCS_REMOTE_FAULT               BIT(9)
+#define        KSZPHY_INTCS_LINK_UP                    BIT(8)
 #define        KSZPHY_INTCS_ALL                        (KSZPHY_INTCS_LINK_UP |\
                                                KSZPHY_INTCS_LINK_DOWN)
 
 /* general PHY control reg in vendor specific block. */
 #define        MII_KSZPHY_CTRL                 0x1F
 /* bitmap of PHY register to set interrupt mode */
-#define KSZPHY_CTRL_INT_ACTIVE_HIGH            (1 << 9)
-#define KSZ9021_CTRL_INT_ACTIVE_HIGH           (1 << 14)
-#define KS8737_CTRL_INT_ACTIVE_HIGH            (1 << 14)
-#define KSZ8051_RMII_50MHZ_CLK                 (1 << 7)
+#define KSZPHY_CTRL_INT_ACTIVE_HIGH            BIT(9)
+#define KSZ9021_CTRL_INT_ACTIVE_HIGH           BIT(14)
+#define KS8737_CTRL_INT_ACTIVE_HIGH            BIT(14)
+#define KSZ8051_RMII_50MHZ_CLK                 BIT(7)
 
 /* Write/read to/from extended registers */
 #define MII_KSZPHY_EXTREG                       0x0b
@@ -400,8 +400,8 @@ static int ksz9031_config_init(struct phy_device *phydev)
 }
 
 #define KSZ8873MLL_GLOBAL_CONTROL_4    0x06
-#define KSZ8873MLL_GLOBAL_CONTROL_4_DUPLEX     (1 << 6)
-#define KSZ8873MLL_GLOBAL_CONTROL_4_SPEED      (1 << 4)
+#define KSZ8873MLL_GLOBAL_CONTROL_4_DUPLEX     BIT(6)
+#define KSZ8873MLL_GLOBAL_CONTROL_4_SPEED      BIT(4)
 static int ksz8873mll_read_status(struct phy_device *phydev)
 {
        int regval;