int full_duplex;
};
-static int fec_enet_open(struct net_device *dev);
-static int fec_enet_start_xmit(struct sk_buff *skb, struct net_device *dev);
static void fec_enet_mii(struct net_device *dev);
static irqreturn_t fec_enet_interrupt(int irq, void * dev_id);
static void fec_enet_tx(struct net_device *dev);
static void fec_enet_rx(struct net_device *dev);
static int fec_enet_close(struct net_device *dev);
-static void set_multicast_list(struct net_device *dev);
static void fec_restart(struct net_device *dev, int duplex);
static void fec_stop(struct net_device *dev);
-static void fec_set_mac_address(struct net_device *dev);
/* MII processing. We keep this as simple as possible. Requests are
/* I should reset the ring buffers here, but I don't yet know
* a simple way to do that.
*/
- fec_set_mac_address(dev);
fep->sequence_done = 0;
fep->link = 0;
}
/* Set a MAC change in hardware. */
-static void
-fec_set_mac_address(struct net_device *dev)
+static int
+fec_set_mac_address(struct net_device *dev, void *p)
{
struct fec_enet_private *fep = netdev_priv(dev);
+ struct sockaddr *addr = p;
+
+ if (!is_valid_ether_addr(addr->sa_data))
+ return -EADDRNOTAVAIL;
+
+ memcpy(dev->dev_addr, addr->sa_data, dev->addr_len);
- /* Set station address. */
writel(dev->dev_addr[3] | (dev->dev_addr[2] << 8) |
(dev->dev_addr[1] << 16) | (dev->dev_addr[0] << 24),
fep->hwp + FEC_ADDR_LOW);
writel((dev->dev_addr[5] << 16) | (dev->dev_addr[4] << 24),
fep + FEC_ADDR_HIGH);
+ return 0;
}
+static const struct net_device_ops fec_netdev_ops = {
+ .ndo_open = fec_enet_open,
+ .ndo_stop = fec_enet_close,
+ .ndo_start_xmit = fec_enet_start_xmit,
+ .ndo_set_multicast_list = set_multicast_list,
+ .ndo_validate_addr = eth_validate_addr,
+ .ndo_tx_timeout = fec_timeout,
+ .ndo_set_mac_address = fec_set_mac_address,
+};
+
/*
* XXX: We need to clean up on failure exits here.
*
fec_request_mii_intr(dev);
#endif
/* The FEC Ethernet specific entries in the device structure */
- dev->open = fec_enet_open;
- dev->hard_start_xmit = fec_enet_start_xmit;
- dev->tx_timeout = fec_timeout;
dev->watchdog_timeo = TX_TIMEOUT;
- dev->stop = fec_enet_close;
- dev->set_multicast_list = set_multicast_list;
+ dev->netdev_ops = &fec_netdev_ops;
for (i=0; i<NMII-1; i++)
mii_cmds[i].mii_next = &mii_cmds[i+1];
/* Clear any outstanding interrupt. */
writel(0xffc00000, fep->hwp + FEC_IEVENT);
- /* Set station address. */
- fec_set_mac_address(dev);
-
/* Reset all multicast. */
writel(0, fep->hwp + FEC_GRP_HASH_TABLE_HIGH);
writel(0, fep->hwp + FEC_GRP_HASH_TABLE_LOW);