ARM: 8258/1: l2c: use l2c_write_sec() for restoring latency and filter regs

All four register for latency and filter settings cannot be written in
non-secure mode and they should go through l2c_write_sec(). More on this
can be found in CoreLink Level 2 Cache Controller L2C-310 Technical
Reference Manual, 3.2. Register summary, table 3.1. This have been checked
the TRM for r3p3, but it should be uniform for all revisions.

Reported-by: Nishanth Menon <nm@ti.com>
Suggested-by: Tomasz Figa <tomasz.figa@gmail.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Tested-by: Nishanth Menon <nm@ti.com>
Acked-by: Nishanth Menon <nm@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

diff --git a/arch/arm/mm/cache-l2x0.c b/arch/arm/mm/cache-l2x0.c
index 5e65ca8..b83c401 100644 (file)
--- a/arch/arm/mm/cache-l2x0.c
+++ b/arch/arm/mm/cache-l2x0.c
@@ -623,14 +623,14 @@ static void l2c310_resume(void)
                unsigned revision;
 
                /* restore pl310 setup */
-               writel_relaxed(l2x0_saved_regs.tag_latency,
-                              base + L310_TAG_LATENCY_CTRL);
-               writel_relaxed(l2x0_saved_regs.data_latency,
-                              base + L310_DATA_LATENCY_CTRL);
-               writel_relaxed(l2x0_saved_regs.filter_end,
-                              base + L310_ADDR_FILTER_END);
-               writel_relaxed(l2x0_saved_regs.filter_start,
-                              base + L310_ADDR_FILTER_START);
+               l2c_write_sec(l2x0_saved_regs.tag_latency, base,
+                             L310_TAG_LATENCY_CTRL);
+               l2c_write_sec(l2x0_saved_regs.data_latency, base,
+                             L310_DATA_LATENCY_CTRL);
+               l2c_write_sec(l2x0_saved_regs.filter_end, base,
+                             L310_ADDR_FILTER_END);
+               l2c_write_sec(l2x0_saved_regs.filter_start, base,
+                             L310_ADDR_FILTER_START);
 
                revision = readl_relaxed(base + L2X0_CACHE_ID) &
                                L2X0_CACHE_ID_RTL_MASK;
@@ -1135,28 +1135,28 @@ static void __init l2c310_of_parse(const struct device_node *np,
 
        of_property_read_u32_array(np, "arm,tag-latency", tag, ARRAY_SIZE(tag));
        if (tag[0] && tag[1] && tag[2])
-               writel_relaxed(
+               l2c_write_sec(
                        L310_LATENCY_CTRL_RD(tag[0] - 1) |
                        L310_LATENCY_CTRL_WR(tag[1] - 1) |
                        L310_LATENCY_CTRL_SETUP(tag[2] - 1),
-                       l2x0_base + L310_TAG_LATENCY_CTRL);
+                       l2x0_base, L310_TAG_LATENCY_CTRL);
 
        of_property_read_u32_array(np, "arm,data-latency",
                                   data, ARRAY_SIZE(data));
        if (data[0] && data[1] && data[2])
-               writel_relaxed(
+               l2c_write_sec(
                        L310_LATENCY_CTRL_RD(data[0] - 1) |
                        L310_LATENCY_CTRL_WR(data[1] - 1) |
                        L310_LATENCY_CTRL_SETUP(data[2] - 1),
-                       l2x0_base + L310_DATA_LATENCY_CTRL);
+                       l2x0_base,  L310_DATA_LATENCY_CTRL);
 
        of_property_read_u32_array(np, "arm,filter-ranges",
                                   filter, ARRAY_SIZE(filter));
        if (filter[1]) {
-               writel_relaxed(ALIGN(filter[0] + filter[1], SZ_1M),
-                              l2x0_base + L310_ADDR_FILTER_END);
-               writel_relaxed((filter[0] & ~(SZ_1M - 1)) | L310_ADDR_FILTER_EN,
-                              l2x0_base + L310_ADDR_FILTER_START);
+               l2c_write_sec(ALIGN(filter[0] + filter[1], SZ_1M),
+                             l2x0_base, L310_ADDR_FILTER_END);
+               l2c_write_sec((filter[0] & ~(SZ_1M - 1)) | L310_ADDR_FILTER_EN,
+                             l2x0_base, L310_ADDR_FILTER_START);
        }
 
        ret = l2x0_cache_size_of_parse(np, aux_val, aux_mask, &assoc, SZ_512K);