Tizen 2.0beta

diff --git a/CMakeLists.txt b/CMakeLists.txt
index 92d4adbe9012258b77160da1a1714ae998a6d41e..7e39e817cde47997cf84d9679bad76f5133953c5 100755 (executable)
--- a/CMakeLists.txt
+++ b/CMakeLists.txt
@@ -10,7 +10,7 @@ SET(INC_DIR include)
 INCLUDE_DIRECTORIES(${INC_DIR})
 
 SET(dependents "capi-base-common")
 INCLUDE_DIRECTORIES(${INC_DIR})
 
 SET(dependents "capi-base-common")

-SET(pc_dependents "capi-base-common wifi-direct")
+SET(pc_dependents "capi-base-common")

 
 INCLUDE(FindPkgConfig)
 pkg_check_modules(${fw_name} REQUIRED ${dependents})
 
 INCLUDE(FindPkgConfig)
 pkg_check_modules(${fw_name} REQUIRED ${dependents})

diff --git a/debian/changelog b/debian/changelog
index 814e8566cf77c35a902e3c58024c906c36d44841..4bc40dbd37fa46fd6c1a9cc285199808a19471bc 100644 (file)
--- a/debian/changelog
+++ b/debian/changelog
@@ -1,7 +1,39 @@
+capi-network-wifi-direct (0.0.3-1) unstable; urgency=low
+
+  * tagging "tizen_build"
+  * Git: slp-source.sec.samsung.net:slp/framework/api/wifi-direct
+  * Tag: tizen_build
+
+ -- Sungsik Jang <sungsik.jang@samsung.com>  Mon, 13 Aug 2012 15:49:40 +0900
+
+capi-network-wifi-direct (0.0.3-1) unstable; urgency=low
+
+  * added new CAPIs for OSP
+  * Git: slp-source.sec.samsung.net:slp/api/wifi-direct
+  * Tag: capi-network-wifi-direct_0.0.3-1
+
+ -- Sungsik Jang <sungsik.jang@samsung.com>  Fri, 01 Jun 2012 16:58:40 +0900
+
+capi-network-wifi-direct (0.0.2-1) unstable; urgency=low
+
+  * added new CAPI for bada
+  * Git: slp-source.sec.samsung.net:slp/api/wifi-direct
+  * Tag: capi-network-wifi-direct_0.0.2-1
+
+ -- Sungsik Jang <sungsik.jang@samsung.com>  Wed, 09 May 2012 13:55:22 +0900
+
+capi-network-wifi-direct (0.0.1-5) unstable; urgency=low
+
+  * Remove dependent package of pc
+  * Git: slp-source.sec.samsung.net:slp/api/wifi-direct
+  * Tag: capi-network-wifi-direct_0.0.1-5
+
+ -- ByungWoo Lee <bw1212.lee@samsung.com>  Thu, 03 May 2012 19:17:00 +0900
+

 capi-network-wifi-direct (0.0.1-4) unstable; urgency=low
 
   * Add dependent package of dev package
 capi-network-wifi-direct (0.0.1-4) unstable; urgency=low
 
   * Add dependent package of dev package

-  * Git: api/wifi-direct
+  * Git: slp-source.sec.samsung.net:slp/api/wifi-direct

   * Tag: capi-network-wifi-direct_0.0.1-4
 
  -- ByungWoo Lee <bw1212.lee@samsung.com>  Fri, 30 Mar 2012 11:31:10 +0900
   * Tag: capi-network-wifi-direct_0.0.1-4
 
  -- ByungWoo Lee <bw1212.lee@samsung.com>  Fri, 30 Mar 2012 11:31:10 +0900


@@ -9,7 +41,7 @@ capi-network-wifi-direct (0.0.1-4) unstable; urgency=low
 capi-network-wifi-direct (0.0.1-3) unstable; urgency=low
 
   * Modified build script for dependent package
 capi-network-wifi-direct (0.0.1-3) unstable; urgency=low
 
   * Modified build script for dependent package

-  * Git: api/wifi-direct
+  * Git: slp-source.sec.samsung.net:slp/api/wifi-direct

   * Tag: capi-network-wifi-direct_0.0.1-3
 
  -- Sungsik Jang <sungsik.jang@samsung.com>  Wed, 21 Mar 2012 17:09:14 +0900
   * Tag: capi-network-wifi-direct_0.0.1-3
 
  -- Sungsik Jang <sungsik.jang@samsung.com>  Wed, 21 Mar 2012 17:09:14 +0900


@@ -17,7 +49,7 @@ capi-network-wifi-direct (0.0.1-3) unstable; urgency=low
 capi-network-wifi-direct (0.0.1-2) unstable; urgency=low
 
   * Modified build script for dependent package
 capi-network-wifi-direct (0.0.1-2) unstable; urgency=low
 
   * Modified build script for dependent package

-  * Git: api/wifi-direct
+  * Git: slp-source.sec.samsung.net:slp/api/wifi-direct

   * Tag: capi-network-wifi-direct_0.0.1-2
 
  -- Sungsik Jang <sungsik.jang@samsung.com>  Tue, 20 Mar 2012 14:36:49 +0900
   * Tag: capi-network-wifi-direct_0.0.1-2
 
  -- Sungsik Jang <sungsik.jang@samsung.com>  Tue, 20 Mar 2012 14:36:49 +0900


@@ -25,7 +57,7 @@ capi-network-wifi-direct (0.0.1-2) unstable; urgency=low
 capi-network-wifi-direct (0.0.1-1) unstable; urgency=low
 
   * Initial upload : WiFi-Direct API
 capi-network-wifi-direct (0.0.1-1) unstable; urgency=low
 
   * Initial upload : WiFi-Direct API

-  * Git: api/wifi-direct
+  * Git: slp-source.sec.samsung.net:slp/api/wifi-direct

   * Tag: capi-network-wifi-direct_0.0.1-1
 
  -- Sungsik Jang <sungsik.jang@samsung.com>  Fri, 17 Feb 2012 16:33:16 +0900
   * Tag: capi-network-wifi-direct_0.0.1-1
 
  -- Sungsik Jang <sungsik.jang@samsung.com>  Fri, 17 Feb 2012 16:33:16 +0900

diff --git a/debian/control b/debian/control
index 59ef809daa91948edbea33e9c73ba686f94214a1..ad4ce4749d626acf62c7790d5a553c333aa9a7b6 100755 (executable)
--- a/debian/control
+++ b/debian/control
@@ -11,7 +11,7 @@ Description: A Network WiFi-Direct Library in Tizen C API
 
 Package: capi-network-wifi-direct-dev
 Architecture: any
 
 Package: capi-network-wifi-direct-dev
 Architecture: any

-Depends: ${shlibs:Depends}, ${misc:Depends}, capi-network-wifi-direct (= ${Source-Version}), capi-base-common-dev, libwifi-direct-dev
+Depends: ${shlibs:Depends}, ${misc:Depends}, capi-network-wifi-direct (= ${Source-Version}), capi-base-common-dev

 Description: A Network WiFi-Direct Library in Tizen C API (DEV)
 
 Package: capi-network-wifi-direct-dbg
 Description: A Network WiFi-Direct Library in Tizen C API (DEV)
 
 Package: capi-network-wifi-direct-dbg

diff --git a/include/wifi-direct.h b/include/wifi-direct.h
index 3aca87442ce621ab8b8e83f73f9e107c0a45f39d..21ba9a4bebd047e9a98e75baae21946179f42c6d 100644 (file)
--- a/include/wifi-direct.h
+++ b/include/wifi-direct.h
@@ -11,14 +11,13 @@
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and

-* limitations under the License. 
+* limitations under the License.

 */
 
 #ifndef __TIZEN_NET_WIFI_DIRECT_H__
 #define __TIZEN_NET_WIFI_DIRECT_H__
 
 */
 
 #ifndef __TIZEN_NET_WIFI_DIRECT_H__
 #define __TIZEN_NET_WIFI_DIRECT_H__
 

-#include <tizen_type.h>
-#include <tizen_error.h>
+#include <tizen.h>

 
 #ifdef __cplusplus
 extern "C" {
 
 #ifdef __cplusplus
 extern "C" {


@@ -35,1719 +34,984 @@ extern "C" {
  */
 typedef enum
 {
  */
 typedef enum
 {

-
-       WIFI_DIRECT_ERROR_NONE = TIZEN_ERROR_NONE,  /**< Successful */
-       WIFI_DIRECT_ERROR_OUT_OF_MEMORY = TIZEN_ERROR_OUT_OF_MEMORY,  /**< Out of memory */
-       WIFI_DIRECT_ERROR_NOT_PERMITTED         = TIZEN_ERROR_NOT_PERMITTED,  /**< Operation not permitted */
-       WIFI_DIRECT_ERROR_INVALID_PARAMETER = TIZEN_ERROR_INVALID_PARAMETER,  /**< Invalid function parameter */
-       WIFI_DIRECT_ERROR_RESOURCE_BUSY = TIZEN_ERROR_RESOURCE_BUSY,  /**< Device or resource busy */
-       WIFI_DIRECT_ERROR_CONNECTION_TIME_OUT = TIZEN_ERROR_CONNECTION_TIME_OUT,  /**< Connection timed out */
-       WIFI_DIRECT_ERROR_STRANGE_CLIENT = TIZEN_ERROR_NETWORK_CLASS|0x0201,  /**< Invalid Client */
-       WIFI_DIRECT_ERROR_COMMUNICATION_FAILED = TIZEN_ERROR_NETWORK_CLASS|0x0202,  /**< I/O error */
-       WIFI_DIRECT_ERROR_WIFI_USED = TIZEN_ERROR_NETWORK_CLASS|0x0203,  /**< WiFi is being used */
-       WIFI_DIRECT_ERROR_MOBILE_AP_USED = TIZEN_ERROR_NETWORK_CLASS|0x0204,  /**< Mobile AP is being used */
-       WIFI_DIRECT_ERROR_CONNECTION_FAILED = TIZEN_ERROR_NETWORK_CLASS|0x0205,  /**< Connection failed */
-       WIFI_DIRECT_ERROR_AUTH_FAILED = TIZEN_ERROR_NETWORK_CLASS|0x0206,  /**< Authentication failed */
-       WIFI_DIRECT_ERROR_OPERATION_FAILED = TIZEN_ERROR_NETWORK_CLASS|0x0207,  /**< Operation failed */
-       WIFI_DIRECT_ERROR_TOO_MANY_CLIENT = TIZEN_ERROR_NETWORK_CLASS|0x0208,  /**< Too many client */
+    WIFI_DIRECT_ERROR_NONE = TIZEN_ERROR_NONE,  /**< Successful */
+    WIFI_DIRECT_ERROR_OUT_OF_MEMORY = TIZEN_ERROR_OUT_OF_MEMORY,  /**< Out of memory */
+    WIFI_DIRECT_ERROR_NOT_PERMITTED     = TIZEN_ERROR_NOT_PERMITTED,  /**< Operation not permitted */
+    WIFI_DIRECT_ERROR_INVALID_PARAMETER = TIZEN_ERROR_INVALID_PARAMETER,  /**< Invalid function parameter */
+    WIFI_DIRECT_ERROR_RESOURCE_BUSY = TIZEN_ERROR_RESOURCE_BUSY,  /**< Device or resource busy */
+    WIFI_DIRECT_ERROR_CONNECTION_TIME_OUT = TIZEN_ERROR_CONNECTION_TIME_OUT,  /**< Connection timed out */
+    WIFI_DIRECT_ERROR_NOT_INITIALIZED = TIZEN_ERROR_NETWORK_CLASS|0x0201,  /**< Not initialized */
+    WIFI_DIRECT_ERROR_COMMUNICATION_FAILED = TIZEN_ERROR_NETWORK_CLASS|0x0202,  /**< I/O error */
+    WIFI_DIRECT_ERROR_WIFI_USED = TIZEN_ERROR_NETWORK_CLASS|0x0203,  /**< WiFi is being used */
+    WIFI_DIRECT_ERROR_MOBILE_AP_USED = TIZEN_ERROR_NETWORK_CLASS|0x0204,  /**< Mobile AP is being used */
+    WIFI_DIRECT_ERROR_CONNECTION_FAILED = TIZEN_ERROR_NETWORK_CLASS|0x0205,  /**< Connection failed */
+    WIFI_DIRECT_ERROR_AUTH_FAILED = TIZEN_ERROR_NETWORK_CLASS|0x0206,  /**< Authentication failed */
+    WIFI_DIRECT_ERROR_OPERATION_FAILED = TIZEN_ERROR_NETWORK_CLASS|0x0207,  /**< Operation failed */
+    WIFI_DIRECT_ERROR_TOO_MANY_CLIENT = TIZEN_ERROR_NETWORK_CLASS|0x0208,  /**< Too many client */

 } wifi_direct_error_e;
 
 /**
  * @brief Enumeration for Wi-Fi Direct link status
  */
 typedef enum {
 } wifi_direct_error_e;
 
 /**
  * @brief Enumeration for Wi-Fi Direct link status
  */
 typedef enum {

-       WIFI_DIRECT_STATE_DEACTIVATED = 0,      /**< */
-       WIFI_DIRECT_STATE_DEACTIVATING,         /**< */
-       WIFI_DIRECT_STATE_ACTIVATING,           /**< */
-       WIFI_DIRECT_STATE_ACTIVATED,            /**< */
-       WIFI_DIRECT_STATE_DISCOVERING,          /**< */
-       WIFI_DIRECT_STATE_CONNECTING,           /**< */
-       WIFI_DIRECT_STATE_DISCONNECTING,        /**< */
-       WIFI_DIRECT_STATE_CONNECTED,            /**< */
+    WIFI_DIRECT_STATE_DEACTIVATED = 0,  /**< Deactivated */
+    WIFI_DIRECT_STATE_DEACTIVATING,  /**< Deactivating */
+    WIFI_DIRECT_STATE_ACTIVATING,  /**< Activating */
+    WIFI_DIRECT_STATE_ACTIVATED,  /**< Activated */
+    WIFI_DIRECT_STATE_DISCOVERING,  /**< Discovering */
+    WIFI_DIRECT_STATE_CONNECTING,  /**< Connecting */
+    WIFI_DIRECT_STATE_DISCONNECTING,  /**< Disconnecting */
+    WIFI_DIRECT_STATE_CONNECTED,  /**< Connected */

 } wifi_direct_state_e;
 
 /**
  * @brief Enumeration for Wi-Fi Direct device state
  */
 typedef enum {
 } wifi_direct_state_e;
 
 /**
  * @brief Enumeration for Wi-Fi Direct device state
  */
 typedef enum {

-    WIFI_DIRECT_DEVICE_STATE_ACTIVATED,
-    WIFI_DIRECT_DEVICE_STATE_DEACTIVATED, 
+    WIFI_DIRECT_DEVICE_STATE_ACTIVATED,  /**< Activated */
+    WIFI_DIRECT_DEVICE_STATE_DEACTIVATED, /**< Deactivated */

 } wifi_direct_device_state_e;
 
 /**
  * @brief Enumeration for Wi-Fi Direct discovery state
  */
 typedef enum {
 } wifi_direct_device_state_e;
 
 /**
  * @brief Enumeration for Wi-Fi Direct discovery state
  */
 typedef enum {

-    WIFI_DIRECT_ONLY_LISTEN_STARTED,
-    WIFI_DIRECT_DISCOVERY_STARTED,        
-    WIFI_DIRECT_DISCOVERY_FOUND,
-    WIFI_DIRECT_DISCOVERY_FINISHED,
+    WIFI_DIRECT_ONLY_LISTEN_STARTED,  /**< Only listen started */
+    WIFI_DIRECT_DISCOVERY_STARTED,  /**< Discovery started */
+    WIFI_DIRECT_DISCOVERY_FOUND,  /**< A remote peer is found */
+    WIFI_DIRECT_DISCOVERY_FINISHED,  /**< Discovery finished */

 } wifi_direct_discovery_state_e;
 
 /**
  * @brief Enumeration for Wi-Fi Direct connection state
  */
 typedef enum {
 } wifi_direct_discovery_state_e;
 
 /**
  * @brief Enumeration for Wi-Fi Direct connection state
  */
 typedef enum {

-    WIFI_DIRECT_CONNECTION_REQ,                                /**< */
-    WIFI_DIRECT_CONNECTION_WPS_REQ,         /**< */
-    WIFI_DIRECT_CONNECTION_IN_PROGRESS,                                /**< */
-    WIFI_DIRECT_CONNECTION_RSP,                                /**< */
-    WIFI_DIRECT_DISASSOCIATION_IND,             /**< */
-    WIFI_DIRECT_DISCONNECTION_RSP,                             /**< */
-    WIFI_DIRECT_DISCONNECTION_IND,                             /**< */
-    WIFI_DIRECT_GROUP_CREATED,                         /**< */
-    WIFI_DIRECT_GROUP_DESTROYED,                               /**< */
+    WIFI_DIRECT_CONNECTION_REQ,  /**< Connection is requested */
+    WIFI_DIRECT_CONNECTION_WPS_REQ,  /**< WPS is requested */
+    WIFI_DIRECT_CONNECTION_IN_PROGRESS,  /**< Connection in progress */
+    WIFI_DIRECT_CONNECTION_RSP,  /**< Connected */
+    WIFI_DIRECT_DISASSOCIATION_IND,  /**< Disconnected by remote Group Client */
+    WIFI_DIRECT_DISCONNECTION_RSP,  /**< Disconnected by local device */
+    WIFI_DIRECT_DISCONNECTION_IND,  /**< Disconnected by remote Group Owner */
+    WIFI_DIRECT_GROUP_CREATED,  /**< Group is created */
+    WIFI_DIRECT_GROUP_DESTROYED,  /**< Group is destroyed */

 } wifi_direct_connection_state_e;
 } wifi_direct_connection_state_e;

-    
+

 /**
  * @brief Enumeration for Wi-Fi Direct secondary device type
  */
 typedef enum {
 /**
  * @brief Enumeration for Wi-Fi Direct secondary device type
  */
 typedef enum {

-       WIFI_DIRECT_SECONDARY_DEVICE_TYPE_COMPUTER_PC         = 1,                      /**< */
-       WIFI_DIRECT_SECONDARY_DEVICE_TYPE_COMPUTER_SERVER     = 2,              /**< */
-       WIFI_DIRECT_SECONDARY_DEVICE_TYPE_COMPUTER_MEDIA_CTR  = 3,              /**< */
-       WIFI_DIRECT_SECONDARY_DEVICE_TYPE_COMPUTER_UMPC       = 4,              /**< */
-       WIFI_DIRECT_SECONDARY_DEVICE_TYPE_COMPUTER_NOTEBOOK   = 5,              /**< */
-       WIFI_DIRECT_SECONDARY_DEVICE_TYPE_COMPUTER_DESKTOP    = 6,              /**< */
-       WIFI_DIRECT_SECONDARY_DEVICE_TYPE_COMPUTER_MID        = 7,              /**< */ 
-       WIFI_DIRECT_SECONDARY_DEVICE_TYPE_COMPUTER_NETBOOK    = 8,              /**< */
-       WIFI_DIRECT_SECONDARY_DEVICE_TYPE_INPUT_KEYBOARD         = 1,                   /**< */
-       WIFI_DIRECT_SECONDARY_DEVICE_TYPE_INPUT_MOUSE       = 2,                /**< */
-       WIFI_DIRECT_SECONDARY_DEVICE_TYPE_INPUT_JOYSTICK    = 3,                /**< */
-       WIFI_DIRECT_SECONDARY_DEVICE_TYPE_INPUT_TRACKBALL   = 4,                /**< */
-       WIFI_DIRECT_SECONDARY_DEVICE_TYPE_INPUT_CONTROLLER  = 5,                /**< */
-       WIFI_DIRECT_SECONDARY_DEVICE_TYPE_INPUT_REMOTE      = 6,                /**< */
-       WIFI_DIRECT_SECONDARY_DEVICE_TYPE_INPUT_TOUCHSCREEN = 7,        /**< */
-       WIFI_DIRECT_SECONDARY_DEVICE_TYPE_INPUT_BIO_READER  = 8,                /**< */
-       WIFI_DIRECT_SECONDARY_DEVICE_TYPE_INPUT_BAR_READER  = 9,                /**< */
-       WIFI_DIRECT_SECONDARY_DEVICE_TYPE_PRINTER_PRINTER    = 1,               /**< */
-       WIFI_DIRECT_SECONDARY_DEVICE_TYPE_PRINTER_SCANNER    = 2,               /**< */
-       WIFI_DIRECT_SECONDARY_DEVICE_TYPE_PRINTER_FAX        = 3,                       /**< */
-       WIFI_DIRECT_SECONDARY_DEVICE_TYPE_PRINTER_COPIER     = 4,               /**< */
-       WIFI_DIRECT_SECONDARY_DEVICE_TYPE_PRINTER_ALLINONE   = 5,               /**< */
-       WIFI_DIRECT_SECONDARY_DEVICE_TYPE_CAMERA_DIGITAL_STILL  = 1,            /**< */
-       WIFI_DIRECT_SECONDARY_DEVICE_TYPE_CAMERA_VIDEO       = 2,               /**< */
-       WIFI_DIRECT_SECONDARY_DEVICE_TYPE_CAMERA_WEBCAM      = 3,               /**< */
-       WIFI_DIRECT_SECONDARY_DEVICE_TYPE_CAMERA_SECONDARYURITY    = 4,         /**< */
-       WIFI_DIRECT_SECONDARY_DEVICE_TYPE_STORAGE_NAS        = 1,               /**< */
-       WIFI_DIRECT_SECONDARY_DEVICE_TYPE_NETWORK_INFRA_AP           = 1,                       /**< */
-       WIFI_DIRECT_SECONDARY_DEVICE_TYPE_NETWORK_INFRA_ROUTER       = 2,               /**< */
-       WIFI_DIRECT_SECONDARY_DEVICE_TYPE_NETWORK_INFRA_SWITCH       = 3,               /**< */
-       WIFI_DIRECT_SECONDARY_DEVICE_TYPE_NETWORK_INFRA_GATEWAY      = 4,               /**< */
-       WIFI_DIRECT_SECONDARY_DEVICE_TYPE_DISPLAY_TV         = 1,                       /**< */
-       WIFI_DIRECT_SECONDARY_DEVICE_TYPE_DISPLAY_PIC_FRAME  = 2,               /**< */
-       WIFI_DIRECT_SECONDARY_DEVICE_TYPE_DISPLAY_PROJECTOR  = 3,               /**< */
-       WIFI_DIRECT_SECONDARY_DEVICE_TYPE_DISPLAY_MONITOR    = 4,               /**< */
-       WIFI_DIRECT_SECONDARY_DEVICE_TYPE_MULTIMEDIA_DAR          = 1,                  /**< */
-       WIFI_DIRECT_SECONDARY_DEVICE_TYPE_MULTIMEDIA_PVR          = 2,                  /**< */
-       WIFI_DIRECT_SECONDARY_DEVICE_TYPE_MULTIMEDIA_MCX          = 3,                  /**< */
-       WIFI_DIRECT_SECONDARY_DEVICE_TYPE_MULTIMEDIA_STB          = 4,                  /**< */
-       WIFI_DIRECT_SECONDARY_DEVICE_TYPE_MULTIMEDIA_MSMAME       = 5,          /**< */ 
-       WIFI_DIRECT_SECONDARY_DEVICE_TYPE_MULTIMEDIA_PVP          = 6,                  /**< */
-       WIFI_DIRECT_SECONDARY_DEVICE_TYPE_GAME_XBOX       = 1,          /**< */
-       WIFI_DIRECT_SECONDARY_DEVICE_TYPE_GAME_XBOX_360   = 2,          /**< */
-       WIFI_DIRECT_SECONDARY_DEVICE_TYPE_GAME_PS         = 3,                  /**< */
-       WIFI_DIRECT_SECONDARY_DEVICE_TYPE_GAME_CONSOLE    = 4,          /**< */
-       WIFI_DIRECT_SECONDARY_DEVICE_TYPE_GAME_PORTABLE   = 5,          /**< */
-       WIFI_DIRECT_SECONDARY_DEVICE_TYPE_PHONE_WM        = 1,          /**< */
-       WIFI_DIRECT_SECONDARY_DEVICE_TYPE_PHONE_SINGLE    = 2,          /**< */
-       WIFI_DIRECT_SECONDARY_DEVICE_TYPE_PHONE_DUAL      = 3,          /**< */
-       WIFI_DIRECT_SECONDARY_DEVICE_TYPE_PHONE_SM_SINGLE = 4,  /**< */
-       WIFI_DIRECT_SECONDARY_DEVICE_TYPE_PHONE_SM_DUAL   = 5,          /**< */
-       WIFI_DIRECT_SECONDARY_DEVICE_TYPE_AUDIO_TUNER     = 1,          /**< */
-       WIFI_DIRECT_SECONDARY_DEVICE_TYPE_AUDIO_SPEAKER   = 2,          /**< */
-       WIFI_DIRECT_SECONDARY_DEVICE_TYPE_AUDIO_PMP       = 3,          /**< */
-       WIFI_DIRECT_SECONDARY_DEVICE_TYPE_AUDIO_HEADSET   = 4,          /**< */
-       WIFI_DIRECT_SECONDARY_DEVICE_TYPE_AUDIO_HEADPHONE = 5,  /**< */ 
-       WIFI_DIRECT_SECONDARY_DEVICE_TYPE_AUDIO_MIC       = 6,          /**< */
-} wifi_direct_secondary_device_type_e ;
+    WIFI_DIRECT_SECONDARY_DEVICE_TYPE_COMPUTER_PC = 1,  /**< PC */
+    WIFI_DIRECT_SECONDARY_DEVICE_TYPE_COMPUTER_SERVER = 2,  /**< Server */
+    WIFI_DIRECT_SECONDARY_DEVICE_TYPE_COMPUTER_MEDIA_CENTER = 3,  /**< Media Center */
+    WIFI_DIRECT_SECONDARY_DEVICE_TYPE_COMPUTER_UMPC = 4,  /**< UMPC */
+    WIFI_DIRECT_SECONDARY_DEVICE_TYPE_COMPUTER_NOTEBOOK = 5,  /**< Notebook */
+    WIFI_DIRECT_SECONDARY_DEVICE_TYPE_COMPUTER_DESKTOP = 6,  /**< Desktop */
+    WIFI_DIRECT_SECONDARY_DEVICE_TYPE_COMPUTER_MID = 7,  /**< MID */
+    WIFI_DIRECT_SECONDARY_DEVICE_TYPE_COMPUTER_NETBOOK = 8,  /**< Netbook */
+    WIFI_DIRECT_SECONDARY_DEVICE_TYPE_INPUT_KEYBOARD = 1,  /**< Keyboard */
+    WIFI_DIRECT_SECONDARY_DEVICE_TYPE_INPUT_MOUSE = 2,  /**< Mouse */
+    WIFI_DIRECT_SECONDARY_DEVICE_TYPE_INPUT_JOYSTICK = 3,  /**< Joystick */
+    WIFI_DIRECT_SECONDARY_DEVICE_TYPE_INPUT_TRACKBALL = 4,  /**< Trackball */
+    WIFI_DIRECT_SECONDARY_DEVICE_TYPE_INPUT_CONTROLLER = 5,  /**< Controller */
+    WIFI_DIRECT_SECONDARY_DEVICE_TYPE_INPUT_REMOTE = 6,  /**< Remote */
+    WIFI_DIRECT_SECONDARY_DEVICE_TYPE_INPUT_TOUCHSCREEN = 7,  /**< Touchscreen */
+    WIFI_DIRECT_SECONDARY_DEVICE_TYPE_INPUT_BIOMETRIC_READER = 8,  /**< Biometric reader */
+    WIFI_DIRECT_SECONDARY_DEVICE_TYPE_INPUT_BARCODE_READER = 9,  /**< Barcode reader */
+    WIFI_DIRECT_SECONDARY_DEVICE_TYPE_PRINTER_PRINTER = 1,  /**< Printer */
+    WIFI_DIRECT_SECONDARY_DEVICE_TYPE_PRINTER_SCANNER = 2,  /**< Scanner */
+    WIFI_DIRECT_SECONDARY_DEVICE_TYPE_PRINTER_FAX = 3,  /**< Fax */
+    WIFI_DIRECT_SECONDARY_DEVICE_TYPE_PRINTER_COPIER = 4,  /**< Copier */
+    WIFI_DIRECT_SECONDARY_DEVICE_TYPE_PRINTER_ALL_IN_ONE = 5,  /**< All-in-one */
+    WIFI_DIRECT_SECONDARY_DEVICE_TYPE_CAMERA_DIGITAL_STILL = 1,  /**< Digital still camera */
+    WIFI_DIRECT_SECONDARY_DEVICE_TYPE_CAMERA_VIDEO = 2,  /**< Video camera */
+    WIFI_DIRECT_SECONDARY_DEVICE_TYPE_CAMERA_WEBCAM = 3,  /**< Webcam */
+    WIFI_DIRECT_SECONDARY_DEVICE_TYPE_CAMERA_SECURITY = 4,     /**< Security camera */
+    WIFI_DIRECT_SECONDARY_DEVICE_TYPE_STORAGE_NAS = 1,  /**< NAS */
+    WIFI_DIRECT_SECONDARY_DEVICE_TYPE_NETWORK_INFRA_AP = 1,  /**< AP */
+    WIFI_DIRECT_SECONDARY_DEVICE_TYPE_NETWORK_INFRA_ROUTER = 2,  /**< Router */
+    WIFI_DIRECT_SECONDARY_DEVICE_TYPE_NETWORK_INFRA_SWITCH = 3,  /**< Switch */
+    WIFI_DIRECT_SECONDARY_DEVICE_TYPE_NETWORK_INFRA_GATEWAY = 4,  /**< Gateway */
+    WIFI_DIRECT_SECONDARY_DEVICE_TYPE_DISPLAY_TV = 1,  /**< TV */
+    WIFI_DIRECT_SECONDARY_DEVICE_TYPE_DISPLAY_PIC_FRAME = 2,  /**< Picture frame */
+    WIFI_DIRECT_SECONDARY_DEVICE_TYPE_DISPLAY_PROJECTOR = 3,  /**< Projector */
+    WIFI_DIRECT_SECONDARY_DEVICE_TYPE_DISPLAY_MONITOR = 4,  /**< Monitor */
+    WIFI_DIRECT_SECONDARY_DEVICE_TYPE_MULTIMEDIA_DAR = 1,  /**< DAR */
+    WIFI_DIRECT_SECONDARY_DEVICE_TYPE_MULTIMEDIA_PVR = 2,  /**< PVR */
+    WIFI_DIRECT_SECONDARY_DEVICE_TYPE_MULTIMEDIA_MCX = 3,  /**< MCX */
+    WIFI_DIRECT_SECONDARY_DEVICE_TYPE_MULTIMEDIA_STB = 4,  /**< Set-top box */
+    WIFI_DIRECT_SECONDARY_DEVICE_TYPE_MULTIMEDIA_MS_MA_ME = 5,  /**< Media Server / Media Adapter / Media Extender */
+    WIFI_DIRECT_SECONDARY_DEVICE_TYPE_MULTIMEDIA_PVP = 6,  /**< Portable video player */
+    WIFI_DIRECT_SECONDARY_DEVICE_TYPE_GAME_XBOX = 1,  /**< Xbox */
+    WIFI_DIRECT_SECONDARY_DEVICE_TYPE_GAME_XBOX_360 = 2,  /**< Xbox 360 */
+    WIFI_DIRECT_SECONDARY_DEVICE_TYPE_GAME_PS = 3,  /**< Playstation */
+    WIFI_DIRECT_SECONDARY_DEVICE_TYPE_GAME_CONSOLE = 4,  /**< Console */
+    WIFI_DIRECT_SECONDARY_DEVICE_TYPE_GAME_PORTABLE = 5,  /**< Portable */
+    WIFI_DIRECT_SECONDARY_DEVICE_TYPE_TELEPHONE_WINDOWS_MOBILE = 1,  /**< Windows Mobile */
+    WIFI_DIRECT_SECONDARY_DEVICE_TYPE_TELEPHONE_PHONE_SINGLE = 2,  /**< Phone - single mode */
+    WIFI_DIRECT_SECONDARY_DEVICE_TYPE_TELEPHONE_PHONE_DUAL = 3,  /**< Phone - dual mode */
+    WIFI_DIRECT_SECONDARY_DEVICE_TYPE_TELEPHONE_SMARTPHONE_SINGLE = 4,  /**< Smart Phone - single mode */
+    WIFI_DIRECT_SECONDARY_DEVICE_TYPE_TELEPHONE_SMARTPHONE_DUAL = 5,  /**< Smart Phone - dual mode */
+    WIFI_DIRECT_SECONDARY_DEVICE_TYPE_AUDIO_TUNER = 1,  /**< Tuner */
+    WIFI_DIRECT_SECONDARY_DEVICE_TYPE_AUDIO_SPEAKER = 2,  /**< Speaker */
+    WIFI_DIRECT_SECONDARY_DEVICE_TYPE_AUDIO_PMP = 3, /**< Portable Music Player */
+    WIFI_DIRECT_SECONDARY_DEVICE_TYPE_AUDIO_HEADSET = 4,  /**< Headset */
+    WIFI_DIRECT_SECONDARY_DEVICE_TYPE_AUDIO_HEADPHONE = 5,  /**< Headphone */
+    WIFI_DIRECT_SECONDARY_DEVICE_TYPE_AUDIO_MIC = 6,  /**< Microphone */
+} wifi_direct_secondary_device_type_e;

 
 /**
  * @brief Enumeration for Wi-Fi Direct primary device type
  */
 typedef enum {
 
 /**
  * @brief Enumeration for Wi-Fi Direct primary device type
  */
 typedef enum {

-       WIFI_DIRECT_PRIMARY_DEVICE_TYPE_COMPUTER = 1,                   /**< */
-       WIFI_DIRECT_PRIMARY_DEVICE_TYPE_INPUT_DEVICE = 2,               /**< */
-       WIFI_DIRECT_PRIMARY_DEVICE_TYPE_PRINTER = 3,                    /**< */
-       WIFI_DIRECT_PRIMARY_DEVICE_TYPE_CAMERA = 4,                     /**< */
-       WIFI_DIRECT_PRIMARY_DEVICE_TYPE_STORAGE = 5,                    /**< */
-       WIFI_DIRECT_PRIMARY_DEVICE_TYPE_NETWORK_INFRA = 6,                      /**< */
-       WIFI_DIRECT_PRIMARY_DEVICE_TYPE_DISPLAY = 7,                    /**< */
-       WIFI_DIRECT_PRIMARY_DEVICE_TYPE_MULTIMEDIA_DEVICE = 8,                  /**< */
-       WIFI_DIRECT_PRIMARY_DEVICE_TYPE_GAME_DEVICE =  9,               /**< */ 
-       WIFI_DIRECT_PRIMARY_DEVICE_TYPE_TELEPHONE = 10,         /**< */
-       WIFI_DIRECT_PRIMARY_DEVICE_TYPE_AUDIO = 11,                     /**< */
-       WIFI_DIRECT_PRIMARY_DEVICE_TYPE_OTHER =  255                    /**< */
-} wifi_direct_primary_device_type_e  ;
+    WIFI_DIRECT_PRIMARY_DEVICE_TYPE_COMPUTER = 1,  /**< Computer */
+    WIFI_DIRECT_PRIMARY_DEVICE_TYPE_INPUT_DEVICE = 2,  /**< Input device */
+    WIFI_DIRECT_PRIMARY_DEVICE_TYPE_PRINTER = 3,  /**< Printer */
+    WIFI_DIRECT_PRIMARY_DEVICE_TYPE_CAMERA = 4,  /**< Camera */
+    WIFI_DIRECT_PRIMARY_DEVICE_TYPE_STORAGE = 5,  /**< Storage */
+    WIFI_DIRECT_PRIMARY_DEVICE_TYPE_NETWORK_INFRA = 6,  /**< Network Infrastructure */
+    WIFI_DIRECT_PRIMARY_DEVICE_TYPE_DISPLAY = 7,  /**< Display */
+    WIFI_DIRECT_PRIMARY_DEVICE_TYPE_MULTIMEDIA_DEVICE = 8,  /**< Multimedia device */
+    WIFI_DIRECT_PRIMARY_DEVICE_TYPE_GAME_DEVICE =  9,  /**< Game device */
+    WIFI_DIRECT_PRIMARY_DEVICE_TYPE_TELEPHONE = 10,  /**< Telephone */
+    WIFI_DIRECT_PRIMARY_DEVICE_TYPE_AUDIO = 11,  /**< Audio */
+    WIFI_DIRECT_PRIMARY_DEVICE_TYPE_OTHER =  255  /**< Others */
+} wifi_direct_primary_device_type_e;

 
 /**
 
 /**

- * @struct wifi_direct_discovered_peer_info_s
- * Wi-Fi Direct buffer structure to store result of peer discovery
+ * @brief Enumeration for Wi-Fi WPS type
+ */
+typedef enum {
+    WIFI_DIRECT_WPS_TYPE_NONE = 0x00,  /**< No WPS type */
+    WIFI_DIRECT_WPS_TYPE_PBC = 0x01,  /**< Push Button Configuration */
+    WIFI_DIRECT_WPS_TYPE_PIN_DISPLAY = 0x02,  /**< Display PIN code */
+    WIFI_DIRECT_WPS_TYPE_PIN_KEYPAD = 0x04,  /**< Provide the keypad to input the PIN */
+} wifi_direct_wps_type_e;
+
+/**
+ * @brief Wi-Fi Direct buffer structure to store result of peer discovery

  */
 typedef struct
 {
  */
 typedef struct
 {

-    char* ssid;  /** Null-terminated device friendly name. */
-    char *mac_address;  /** Device's P2P Device Address */
-    char* interface_address;  /** Device's P2P Interface Address.  Valid only if device is a P2P GO. */    
-    int channel;  /** Channel the device is listening on. */
-    bool is_connected;  /** Is peer connected*/
-    bool is_group_owner;  /** Is an active P2P Group Owner */    
-    bool is_persistent_group_owner;  /** Is a stored Persistent GO */
-    wifi_direct_primary_device_type_e primary_device_type;  /** primary category of device */
-    wifi_direct_secondary_device_type_e secondary_device_type;  /** sub category of device */
+    char* ssid;  /**< Device friendly name. */
+    char *mac_address;  /**< Device's P2P Device Address */
+    char* interface_address;  /**< Device's P2P Interface Address.  Valid only if device is a P2P GO. */
+    int channel;  /**< Channel the device is listening on. */
+    bool is_connected;  /**< Is peer connected*/
+    bool is_group_owner;  /**< Is an active P2P Group Owner */
+    bool is_persistent_group_owner;  /**< Is a stored Persistent GO */
+    wifi_direct_primary_device_type_e primary_device_type;  /**< Primary category of device */
+    wifi_direct_secondary_device_type_e secondary_device_type;  /**< Sub category of device */
+    int supported_wps_types;  /**< The list of supported WPS type.\n The OR operation on #wifi_direct_wps_type_e can be used like #WIFI_DIRECT_WPS_TYPE_PBC | #WIFI_DIRECT_WPS_TYPE_PIN_DISPLAY */
+    bool is_p2p_invitation_procedure_supported;  /**< Is capable of processing P2P Invitation Procedure signaling */

 } wifi_direct_discovered_peer_info_s;
 
 
 /**
 } wifi_direct_discovered_peer_info_s;
 
 
 /**

- * @struct wifi_direct_connected_peer_info_s
- * Wi-Fi Direct buffer structure to store information of connected peer
+ * @brief Wi-Fi Direct buffer structure to store information of connected peer

  */
 typedef struct
 {
  */
 typedef struct
 {

-    char* ssid;  /** Null-terminated device friendly name. */
-    char* mac_address;  /** Device's P2P Device Address */
+    char* ssid;  /**< Device friendly name. */
+    char* ip_address;  /**< The IP address */
+    char* mac_address;  /**< Device's P2P Device Address */

     char* interface_address;  /** Device's P2P Interface Address */
     bool p2p_supported;  /* whether peer is a P2P device */
     char* interface_address;  /** Device's P2P Interface Address */
     bool p2p_supported;  /* whether peer is a P2P device */

-    wifi_direct_primary_device_type_e  primary_device_type;  /* primary category of device */
+    wifi_direct_primary_device_type_e   primary_device_type;  /* primary category of device */
+    int channel;  /* Operating channel */

 } wifi_direct_connected_peer_info_s;
 
 /**
 } wifi_direct_connected_peer_info_s;
 
 /**

- * Notification callback function type. \n
- *
- * Discover notifications can occur at the peers or P2P groups are found.
- *
- * @param event             Specifies the types of notifications.
- *                          - WIFI_DIRECT_DISCOVERY_STARTED
- *                          - WIFI_DIRECT_ONLY_LISTEN_STARTED
- *                          - WIFI_DIRECT_DISCOVERY_FOUND
- *                          - WIFI_DIRECT_DISCOVERY_FINISHED
- * @param error_code        In failure case.
- * @param user_data         User can transfer the user specific data in callback.
- *
+ * @brief Called when the state of discovery is changed.
+ * @param[in] error_code  The error code
+ * @param[in] discovery_state  The discovery state
+ * @param[in] user_data  The user data passed from the callback registration function
+ * @pre Either wifi_direct_start_discovery() or wifi_direct_cancel_discovery() will invoke this callback
+ * if you register this callback using wifi_direct_set_discovery_state_changed_cb().
+ * @see wifi_direct_start_discovery()
+ * @see wifi_direct_cancel_discovery()
+ * @see wifi_direct_set_discovery_state_changed_cb()
+ * @see wifi_direct_unset_discovery_state_changed_cb()

  */
  */

-typedef void (*wifi_direct_discovery_state_chagned_cb) (int error_code, wifi_direct_discovery_state_e discovery_state, void *user_data);
+typedef void (*wifi_direct_discovery_state_chagned_cb) (wifi_direct_error_e error_code, wifi_direct_discovery_state_e discovery_state, void *user_data);

 
 /**
 
 /**

- * Notification callback function type. \n
- *
- * Activation notifications callback function type.
- *
- * @param event             Specifies the types of notifications.
- *                          - WIFI_DIRECT_DEVICE_STATE_ACTIVATED
- *                          - WIFI_DIRECT_DEVICE_STATE_DEACTIVATED
- * @param error_code        In failure case.
- * @param user_data         User can transfer the user specific data in callback.
- *
+ * @brief Called when the state of device is changed.
+ * @param[in] error_code  The error code
+ * @param[in] device_state  The device state
+ * @param[in] user_data  The user data passed from the callback registration function
+ * @pre Either wifi_direct_activate() or wifi_direct_deactivate() will invoke this callback
+ * if you register this callback using wifi_direct_set_device_state_changed_cb().
+ * @see wifi_direct_activate()
+ * @see wifi_direct_deactivate()
+ * @see wifi_direct_set_device_state_changed_cb()
+ * @see wifi_direct_unset_device_state_changed_cb()

  */
  */

-
-typedef void (*wifi_direct_device_state_changed_cb) (int error_code, wifi_direct_device_state_e device_state, void *user_data);
+typedef void (*wifi_direct_device_state_changed_cb) (wifi_direct_error_e error_code, wifi_direct_device_state_e device_state, void *user_data);

 
 /**
 
 /**

- * connection notification callback function type. \n
- *
- * @param event             Specifies the types of notifications.
- *                          - WIFI_DIRECT_CONNECTION_REQ
- *                          - WIFI_DIRECT_CONNECTION_WPS_REQ
- *                          - WIFI_DIRECT_CONNECTION_IN_PROGRESS
- *                          - WIFI_DIRECT_CONNECTION_RSP
- *                          - WIFI_DIRECT_DISASSOCIATION_IND
- *                          - WIFI_DIRECT_DISCONNECTION_RSP
- *                          - WIFI_DIRECT_DISCONNECTION_IND
- *                          - WIFI_DIRECT_GROUP_CREATED
- *                          - WIFI_DIRECT_GROUP_DESTROYED
- *
- * @param error_code        In failure case.
- *
- * @param param1        additional data for connection. ex) MAC
- * @param param2        additional data for connection. ex) SSID
- *
- * @param user_data         User can transfer the user specific data in callback.
- *
+ * @brief Called when the state of connection is changed.
+ * @param[in] error_code  The error code
+ * @param[in] connection_state  The connection state
+ * @param[in] mac_address  The MAC address of connection peer
+ * @param[in] user_data  The user data passed from the callback registration function
+ * @pre wifi_direct_create_group(), wifi_direct_destroy_group(), wifi_direct_connect(), wifi_direct_disconnect() or wifi_direct_disconnect_all() will invoke this callback
+ * if you register this callback using wifi_direct_set_connection_state_changed_cb().
+ * @see wifi_direct_connect()
+ * @see wifi_direct_disconnect()
+ * @see wifi_direct_disconnect_all()
+ * @see wifi_direct_set_connection_state_changed_cb()
+ * @see wifi_direct_unset_connection_state_changed_cb()

  */
  */

-typedef void (*wifi_direct_connection_state_changed_cb) (int error_code, wifi_direct_connection_state_e connection_state, const char* mac_address, void *user_data);
-
-
-/*=============================================================================
-                                        Wifi Direct Client APIs
-=============================================================================*/
+typedef void (*wifi_direct_connection_state_changed_cb) (wifi_direct_error_e error_code, wifi_direct_connection_state_e connection_state, const char* mac_address, void *user_data);

 
 

-/*****************************************************************************/
-/* wifi_direct_initialize API function prototype
- * int wifi_direct_initialize (void);
- */

 /**
 /**

- * \brief      This API shall register the client application with the Wi-Fi Direct server and  initialize the various variables. \n
- *
- * \pre None.
- *
- * \post Application is registered.
- *
- * \see wifi_direct_device_state_changed_cb
- * \see wifi_direct_discovery_state_chagned_cb
- * \see wifi_direct_connection_state_changed_cb
- *
- * \par Sync (or) Async:
- * This is a Synchronous API.
- *
- * \warning
- *  None
- *
- * \return Return Type (int) \n
- *
- * - WIFI_DIRECT_ERROR_NONE on success \n
- * - WIFI_DIRECT_ERROR_OPERATION_FAILED for "Unkown error" \n
- * - WIFI_DIRECT_ERROR_OUT_OF_MEMORY for "Out of memory" \n
- * - WIFI_DIRECT_ERROR_COMMUNICATION_FAILED for "I/O error" \n
- * - WIFI_DIRECT_ERROR_TOO_MANY_CLIENT for "Too many users" \n
- * - WIFI_DIRECT_ERROR_RESOURCE_BUSY for "Device or resource busy" \n
- * - WIFI_DIRECT_ERROR_STRANGE_CLIENT for "Invalid Client" \n
- *
- * \par Prospective Clients:
- * External Apps.
- *
- * \remarks None.
- * \code
- *
- * #include <wifi-direct.h>
- *
- * void foo(void)
- * {
- *
- * int result;
- * 
- * result = wifi_direct_initialize();
- *
- * if(result == WIFI_DIRECT_ERROR_NONE).........// Successfully connected to the wifi direct server
- *
- * \endcode
- ******************************************************************************/
-int wifi_direct_initialize(void);
-
+ * @brief Called when IP address of client is assigned when your device is group owner.
+ * @param[in] mac_address  The MAC address of connection peer
+ * @param[in] ip_address  The IP address of connection peer
+ * @param[in] interface_address  The interface address of connection peer
+ * @param[in] user_data  The user data passed from the callback registration function
+ * @see wifi_direct_set_client_ip_address_assigned_cb()
+ * @see wifi_direct_unset_client_ip_address_assigned_cb()
+ */
+typedef void (*wifi_direct_client_ip_address_assigned_cb) (const char* mac_address, const char* ip_address, const char* interface_address, void *user_data);

 
 

-/*****************************************************************************************/
-/* wifi_direct_deinitialize API function prototype
- * int wifi_direct_deinitialize(void);
+/**
+ * @brief Initialize Wi-Fi Direct service.
+ * @return 0 on success, otherwise a negative error value.
+ * @retval #WIFI_DIRECT_ERROR_NONE  Successful
+ * @retval #WIFI_DIRECT_ERROR_OPERATION_FAILED  Operation failed
+ * @retval #WIFI_DIRECT_ERROR_COMMUNICATION_FAILED  Communication failed
+ * @retval #WIFI_DIRECT_ERROR_RESOURCE_BUSY  Device or resource busy
+ * @retval #WIFI_DIRECT_ERROR_NOT_INITIALIZED  Not initialized
+ * @see wifi_direct_deinitialize()

  */
  */

+int wifi_direct_initialize(void);

 
 /**
 
 /**

- * \brief This API shall deregister the client application with the Wi-Fi Direct server and releases all resources.
- *
- * \pre Application must be already registered to the Wi-Fi Direct server.
- *
- * \post Application is de-registered.
- *
- * \see wifi_direct_initialize
- *
- * \par Sync (or) Async:
- * This is a Synchronous API.
- *
- * \warning
- *  None
- *
- *
- * \par Async Response Message:
- *        None
- *
- *
- * \return Return Type (int) \n
- * - WIFI_DIRECT_ERROR_NONE on success \n
- * - WIFI_DIRECT_ERROR_OPERATION_FAILED for "Unkown error" \n
- * - WIFI_DIRECT_ERROR_OUT_OF_MEMORY for "Out of memory" \n
- * - WIFI_DIRECT_ERROR_COMMUNICATION_FAILED for "I/O error" \n
- * - WIFI_DIRECT_ERROR_NOT_PERMITTED for "Operation not permitted" \n
- * - WIFI_DIRECT_ERROR_RESOURCE_BUSY for "Device or resource busy" \n
- * - WIFI_DIRECT_ERROR_STRANGE_CLIENT for "Invalid Client" \n
- *
- * \par Prospective Clients:
- * External Apps.
- *
- * \code
- *
- * #include <wifi-direct.h>
- *
- * void foo(void)
- * {
-
- * int result;
- *
- * result = wifi_direct_deinitialize();
- *
- * if(result == WIFI_DIRECT_ERROR_NONE)......... // Deregister is successful
- *
- *\endcode
- *
- *\remarks None.
- *
- ******************************************************************************/
+ * @brief Deinitialize Wi-Fi Direct service.
+ * @return 0 on success, otherwise a negative error value.
+ * @retval #WIFI_DIRECT_ERROR_NONE  Successful
+ * @retval #WIFI_DIRECT_ERROR_NOT_PERMITTED  Operation not permitted
+ * @retval #WIFI_DIRECT_ERROR_OPERATION_FAILED  Operation failed
+ * @retval #WIFI_DIRECT_ERROR_COMMUNICATION_FAILED  Communication failed
+ * @pre Wi-Fi Direct service must be initialized by wifi_direct_initialize().
+ * @see wifi_direct_initialize()
+ */

 int wifi_direct_deinitialize(void);
 
 int wifi_direct_deinitialize(void);
 

-
-/*****************************************************************************/
-/* wifi_direct_set_connection_state_changed_cb API function prototype
- * int wifi_direct_set_connection_state_changed_cb(wifi_direct_device_state_changed_cb cb, void* user_data)
- */

 /**
 /**

- * \brief      This API shall register the activation callback function and user data from client. \n
- *
- * \pre The Client should be initialized.
- *
- * \see wifi_direct_initialize
- * \see wifi_direct_device_state_changed_cb
- *
- * \par Sync (or) Async:
- * This is a Synchronous API.
- *
- * \warning
- *  None
- *
- * \param[in] cb    Application Callback function pointer to receive Wi-Fi Direct events
- * \param[in] user_data    user data
- * 
- * \return Return Type (int) \n
- *
- * - WIFI_DIRECT_ERROR_NONE on success \n
- * - WIFI_DIRECT_ERROR_NOT_PERMITTED for "Operation not permitted" \n
- *
- * \par Prospective Clients:
- * External Apps.
- *
- * \remarks None.
- * \code
- *
- * #include <wifi-direct.h>
- *
- * void foo(void)
- * {
- *
- * int result;
- * 
- * result = wifi_direct_set_connection_state_changed_cb(_cb_activation, void* user_data);
- *
- * if(result == WIFI_DIRECT_ERROR_NONE).........// Successfully registered the callback function
- *
- * \endcode
- ******************************************************************************/
+ * @brief Registers the callback called when the state of device is changed.
+ * @param[in] cb  The callback function to invoke
+ * @param[in] user_data  The user data to be passed to the callback function
+ * @return 0 on success, otherwise a negative error value.
+ * @retval #WIFI_DIRECT_ERROR_NONE  Successful
+ * @retval #WIFI_DIRECT_ERROR_INVALID_PARAMETER  Invalid parameter
+ * @retval #WIFI_DIRECT_ERROR_NOT_INITIALIZED  Not initialized
+ * @pre Wi-Fi Direct service must be initialized by wifi_direct_initialize().
+ * @see wifi_direct_initialize()
+ * @see wifi_direct_unset_device_state_changed_cb()
+ * @see wifi_direct_device_state_changed_cb()
+ */

 int wifi_direct_set_device_state_changed_cb(wifi_direct_device_state_changed_cb cb, void* user_data);
 
 int wifi_direct_set_device_state_changed_cb(wifi_direct_device_state_changed_cb cb, void* user_data);
 

-
-/*****************************************************************************/
-/* wifi_direct_unset_connection_state_changed_cb API function prototype
- * int wifi_direct_unset_connection_state_changed_cb(void)
- */

 /**
 /**

- * \brief      This API shall deregister the activation callback function and user data from client. \n
- *
- * \pre The Client should be initialized.
- *
- * \see wifi_direct_initialize
- * \see wifi_direct_set_connection_state_changed_cb
- *
- * \par Sync (or) Async:
- * This is a Synchronous API.
- *
- * \warning
- *  None
- *
- * \return Return Type (int) \n
- *
- * - WIFI_DIRECT_ERROR_NONE on success \n
- * - WIFI_DIRECT_ERROR_NOT_PERMITTED for "Operation not permitted" \n
- *
- * \par Prospective Clients:
- * External Apps.
- *
- * \remarks None.
- * \code
- *
- * #include <wifi-direct.h>
- *
- * void foo(void)
- * {
- *
- * int result;
- * 
- * result = wifi_direct_unset_connection_state_changed_cb();
- *
- * if(result == WIFI_DIRECT_ERROR_NONE).........// Successfully deregistered the callback function
- *
- * \endcode
- ******************************************************************************/
+ * @brief Unregisters the callback called when the state of device is changed.
+ * @return 0 on success, otherwise a negative error value.
+ * @retval #WIFI_DIRECT_ERROR_NONE  Successful
+ * @retval #WIFI_DIRECT_ERROR_NOT_INITIALIZED  Not initialized
+ * @pre Wi-Fi Direct service must be initialized by wifi_direct_initialize().
+ * @see wifi_direct_initialize()
+ * @see wifi_direct_set_device_state_changed_cb()
+ */

 int wifi_direct_unset_device_state_changed_cb(void);
 
 int wifi_direct_unset_device_state_changed_cb(void);
 

-
-
-/*****************************************************************************/
-/* wifi_direct_set_discovery_state_changed_cb API function prototype
- * int wifi_direct_set_discover_state_changed_cb(wifi_direct_discovery_state_chagned_cb cb, void* user_data)
- */

 /**
 /**

- * \brief      This API shall register the discover callback function and user data from client. \n
- *
- * \pre The Client should be initialized.
- *
- * \see wifi_direct_initialize
- * \see wifi_direct_discovery_state_chagned_cb
- *
- * \par Sync (or) Async:
- * This is a Synchronous API.
- *
- * \warning
- *  None
- *
- * \param[in] cb    Application Callback function pointer to receive Wi-Fi Direct events
- * \param[in] user_data    user data
- * 
- * \return Return Type (int) \n
- *
- * - WIFI_DIRECT_ERROR_NONE on success \n
- * - WIFI_DIRECT_ERROR_NOT_PERMITTED for "Operation not permitted" \n
- *
- * \par Prospective Clients:
- * External Apps.
- *
- * \remarks None.
- * \code
- *
- * #include <wifi-direct.h>
- *
- * void foo(void)
- * {
- *
- * int result;
- * 
- * result = wifi_direct_set_discovery_state_changed_cb(_cb_discover, void* user_data);
- *
- * if(result == WIFI_DIRECT_ERROR_NONE).........// Successfully registered the callback function
- *
- * \endcode
- ******************************************************************************/
+ * @brief Registers the callback called when the state of discovery is changed.
+ * @param[in] cb  The callback function to invoke
+ * @param[in] user_data  The user data to be passed to the callback function
+ * @return 0 on success, otherwise a negative error value.
+ * @retval #WIFI_DIRECT_ERROR_NONE  Successful
+ * @retval #WIFI_DIRECT_ERROR_INVALID_PARAMETER  Invalid parameter
+ * @retval #WIFI_DIRECT_ERROR_NOT_INITIALIZED  Not initialized
+ * @pre Wi-Fi Direct service must be initialized by wifi_direct_initialize().
+ * @see wifi_direct_initialize()
+ * @see wifi_direct_unset_discovery_state_changed_cb()
+ * @see wifi_direct_discovery_state_chagned_cb()
+ */

 int wifi_direct_set_discovery_state_changed_cb(wifi_direct_discovery_state_chagned_cb cb, void* user_data);
 
 int wifi_direct_set_discovery_state_changed_cb(wifi_direct_discovery_state_chagned_cb cb, void* user_data);
 

-
-/*****************************************************************************/
-/* wifi_direct_unset_discovery_state_changed_cb API function prototype
- * int wifi_direct_unset_discovery_state_changed_cb(void)
- */

 /**
 /**

- * \brief      This API shall deregister the discover callback function and user data from client. \n
- *
- * \pre The Client should be initialized.
- *
- * \see wifi_direct_initialize
- * \see wifi_direct_set_discovery_state_changed_cb
- *
- * \par Sync (or) Async:
- * This is a Synchronous API.
- *
- * \warning
- *  None
- *
- * \return Return Type (int) \n
- *
- * - WIFI_DIRECT_ERROR_NONE on success \n
- * - WIFI_DIRECT_ERROR_NOT_PERMITTED for "Operation not permitted" \n
- *
- * \par Prospective Clients:
- * External Apps.
- *
- * \remarks None.
- * \code
- *
- * #include <wifi-direct.h>
- *
- * void foo(void)
- * {
- *
- * int result;
- * 
- * result = wifi_direct_unset_discovery_state_changed_cb();
- *
- * if(result == WIFI_DIRECT_ERROR_NONE).........// Successfully deregistered the callback function
- *
- * \endcode
- ******************************************************************************/
+ * @brief Unregisters the callback called when the state of discovery is changed.
+ * @return 0 on success, otherwise a negative error value.
+ * @retval #WIFI_DIRECT_ERROR_NONE  Successful
+ * @retval #WIFI_DIRECT_ERROR_NOT_INITIALIZED  Not initialized
+ * @pre Wi-Fi Direct service must be initialized by wifi_direct_initialize().
+ * @see wifi_direct_initialize()
+ * @see wifi_direct_set_discovery_state_changed_cb()
+ */

 int wifi_direct_unset_discovery_state_changed_cb(void);
 
 int wifi_direct_unset_discovery_state_changed_cb(void);
 

-
-
-/*****************************************************************************/
-/* wifi_direct_set_connection_state_changed_cb API function prototype
- * int wifi_direct_set_connection_state_changed_cb(wifi_direct_connection_state_changed_cb cb, void* user_data)
- */

 /**
 /**

- * \brief      This API shall register the connection callback function and user data from client. \n
- *
- * \pre The Client should be initialized.
- *
- * \see wifi_direct_initialize
- * \see wifi_direct_connection_state_changed_cb
- *
- * \par Sync (or) Async:
- * This is a Synchronous API.
- *
- * \warning
- *  None
- *
- * \param[in] cb    Application Callback function pointer to receive Wi-Fi Direct events
- * \param[in] user_data    user data
- * 
- * \return Return Type (int) \n
- *
- * - WIFI_DIRECT_ERROR_NONE on success \n
- * - WIFI_DIRECT_ERROR_NOT_PERMITTED for "Operation not permitted" \n
- *
- * \par Prospective Clients:
- * External Apps.
- *
- * \remarks None.
- * \code
- *
- * #include <wifi-direct.h>
- *
- * void foo(void)
- * {
- *
- * int result;
- * 
- * result = wifi_direct_set_connection_state_changed_cb(_cb_connection, void* user_data);
- *
- * if(result == WIFI_DIRECT_ERROR_NONE).........// Successfully registered the callback function
- *
- * \endcode
- ******************************************************************************/
+ * @brief Registers the callback called when the state of connection is changed.
+ * @param[in] cb  The callback function to invoke
+ * @param[in] user_data  The user data to be passed to the callback function
+ * @return 0 on success, otherwise a negative error value.
+ * @retval #WIFI_DIRECT_ERROR_NONE  Successful
+ * @retval #WIFI_DIRECT_ERROR_INVALID_PARAMETER  Invalid parameter
+ * @retval #WIFI_DIRECT_ERROR_NOT_INITIALIZED  Not initialized
+ * @pre Wi-Fi Direct service must be initialized by wifi_direct_initialize().
+ * @see wifi_direct_initialize()
+ * @see wifi_direct_unset_connection_state_changed_cb()
+ * @see wifi_direct_connection_state_changed_cb()
+ */

 int wifi_direct_set_connection_state_changed_cb(wifi_direct_connection_state_changed_cb cb, void* user_data);
 
 int wifi_direct_set_connection_state_changed_cb(wifi_direct_connection_state_changed_cb cb, void* user_data);
 

-
-/*****************************************************************************/
-/* wifi_direct_unset_connection_state_changed_cb API function prototype
- * int wifi_direct_unset_connection_state_changed_cb(void)
- */

 /**
 /**

- * \brief      This API shall deregister the connection callback function and user data from client. \n
- *
- * \pre The Client should be initialized.
- *
- * \see wifi_direct_initialize
- * \see wifi_direct_set_connection_state_changed_cb
- *
- * \par Sync (or) Async:
- * This is a Synchronous API.
- *
- * \warning
- *  None
- *
- * \return Return Type (int) \n
- *
- * - WIFI_DIRECT_ERROR_NONE on success \n
- * - WIFI_DIRECT_ERROR_NOT_PERMITTED for "Operation not permitted" \n
- *
- * \par Prospective Clients:
- * External Apps.
- *
- * \remarks None.
- * \code
- *
- * #include <wifi-direct.h>
- *
- * void foo(void)
- * {
- *
- * int result;
- * 
- * result = wifi_direct_unset_connection_state_changed_cb();
- *
- * if(result == WIFI_DIRECT_ERROR_NONE).........// Successfully deregistered the callback function
- *
- * \endcode
- ******************************************************************************/
+ * @brief Unregisters the callback called when the state of connection is changed.
+ * @return 0 on success, otherwise a negative error value.
+ * @retval #WIFI_DIRECT_ERROR_NONE  Successful
+ * @retval #WIFI_DIRECT_ERROR_NOT_INITIALIZED  Not initialized
+ * @pre Wi-Fi Direct service must be initialized by wifi_direct_initialize().
+ * @see wifi_direct_initialize()
+ * @see wifi_direct_set_connection_state_changed_cb()
+ */

 int wifi_direct_unset_connection_state_changed_cb(void);
 
 int wifi_direct_unset_connection_state_changed_cb(void);
 

-
-/*****************************************************************************************/
-/* wifi_direct_activate API function prototype
- * int wifi_direct_activate(void);
+/**
+ * @brief Registers the callback called when IP address of client is assigned when your device is group owner.
+ * @param[in] cb  The callback function to invoke
+ * @param[in] user_data  The user data to be passed to the callback function
+ * @return 0 on success, otherwise a negative error value.
+ * @retval #WIFI_DIRECT_ERROR_NONE  Successful
+ * @retval #WIFI_DIRECT_ERROR_INVALID_PARAMETER  Invalid parameter
+ * @retval #WIFI_DIRECT_ERROR_NOT_INITIALIZED  Not initialized
+ * @pre Wi-Fi Direct service must be initialized by wifi_direct_initialize().
+ * @see wifi_direct_initialize()
+ * @see wifi_direct_unset_client_ip_address_assigned_cb()
+ * @see wifi_direct_client_ip_address_assigned_cb()

  */
  */

+int wifi_direct_set_client_ip_address_assigned_cb(wifi_direct_client_ip_address_assigned_cb cb, void* user_data);

 
 /**
 
 /**

- * \brief This API shall open a wireless adapter device for P2P use.
-
- * \pre Application must be already registered to the Wi-Fi Direct server.
- *
- * \post wireless adapter device will be ready to use.
- *
- * \see wifi_direct_initialize
- *
- * \par Sync (or) Async:
- * This is a Asynchronous API.
- *
- * \warning
- *  None
- *
- *
- * \par Async Response Message:
- *  - WIFI_DIRECT_DEVICE_STATE_ACTIVATED : Application will receive this event via wifi_direct_device_state_changed_cb, when activation  process is completed. \n
- *
- *
- * \return Return Type (int*) \n
- * - WIFI_DIRECT_ERROR_NONE on success \n
- * - WIFI_DIRECT_ERROR_OPERATION_FAILED for "Unkown error" \n
- * - WIFI_DIRECT_ERROR_OUT_OF_MEMORY for "Out of memory" \n
- * - WIFI_DIRECT_ERROR_COMMUNICATION_FAILED for "I/O error" \n
- * - WIFI_DIRECT_ERROR_NOT_PERMITTED for "Operation not permitted" \n
- * - WIFI_DIRECT_ERROR_RESOURCE_BUSY for "Device or resource busy" \n
- * - WIFI_DIRECT_ERROR_STRANGE_CLIENT for "Invalid Client" \n
- * - WIFI_DIRECT_ERROR_WIFI_USED for "WiFi is being used" \n
- * - WIFI_DIRECT_ERROR_MOBILE_AP_USED for "Mobile AP is being used" \n
- *
- *
- * \par Prospective Clients:
- * External Apps.
- *
- * \code
- *
- * #include <wifi-direct.h>
- *
- * void foo(void)
- * {
-
- * int result;
- *
- * result = wifi_direct_activate();
- *
- * if(result == WIFI_DIRECT_ERROR_NONE)......... // activation is successful
- *
- *\endcode
- *
- *\remarks None.
- *
- ******************************************************************************/
-int wifi_direct_activate(void);
-
+ * @brief Unregisters the callback called when IP address of client is assigned when your device is group owner.
+ * @return 0 on success, otherwise a negative error value.
+ * @retval #WIFI_DIRECT_ERROR_NONE  Successful
+ * @retval #WIFI_DIRECT_ERROR_NOT_INITIALIZED  Not initialized
+ * @pre Wi-Fi Direct service must be initialized by wifi_direct_initialize().
+ * @see wifi_direct_initialize()
+ * @see wifi_direct_set_connection_state_changed_cb()
+ */
+int wifi_direct_unset_client_ip_address_assigned_cb(void);

 
 

-/*****************************************************************************************/
-/* wifi_direct_deactivate API function prototype
- * int wifi_direct_deactivate(void);
+/**
+ * @brief Activates the Wi-Fi Direct service, asynchronous.
+ * @return 0 on success, otherwise a negative error value.
+ * @retval #WIFI_DIRECT_ERROR_NONE  Successful
+ * @retval #WIFI_DIRECT_ERROR_OPERATION_FAILED  Operation failed
+ * @retval #WIFI_DIRECT_ERROR_COMMUNICATION_FAILED  Communication failed
+ * @retval #WIFI_DIRECT_ERROR_NOT_PERMITTED  Operation not permitted
+ * @retval #WIFI_DIRECT_ERROR_NOT_INITIALIZED  Not initialized
+ * @retval #WIFI_DIRECT_ERROR_RESOURCE_BUSY  Device or resource busy
+ * @retval #WIFI_DIRECT_ERROR_WIFI_USED  Wi-Fi is being used
+ * @retval #WIFI_DIRECT_ERROR_MOBILE_AP_USED  Mobile AP is being used
+ * @pre Wi-Fi Direct service must be initialized by wifi_direct_initialize().
+ * @post wifi_direct_device_state_changed_cb() will be invoked.
+ * @see wifi_direct_initialize()
+ * @see wifi_direct_deactivate()
+ * @see wifi_direct_device_state_changed_cb()

  */
  */

+int wifi_direct_activate(void);

 
 /**
 
 /**

- * \brief This API shall close a wireless adapter device for P2P use
-
- * \pre Wireless adapter device must be already opened.
- *
- * \post wireless adapter device will be closed.
- *
- * \see wifi_direct_activate
- *
- * \par Sync (or) Async:
- * This is a Asynchronous API.
- *
- * \warning
- *  None
- *
- *
- * \par Async Response Message:
- *  - WIFI_DIRECT_DEVICE_STATE_DEACTIVATED : Application will receive this event via wifi_direct_device_state_changed_cb, when deactivation  process is completed. \n
-
- * \return Return Type (int) \n
- * - WIFI_DIRECT_ERROR_NONE on success \n
- * - WIFI_DIRECT_ERROR_OPERATION_FAILED for "Unkown error" \n
- * - WIFI_DIRECT_ERROR_OUT_OF_MEMORY for "Out of memory" \n
- * - WIFI_DIRECT_ERROR_COMMUNICATION_FAILED for "I/O error" \n
- * - WIFI_DIRECT_ERROR_NOT_PERMITTED for "Operation not permitted" \n
- * - WIFI_DIRECT_ERROR_RESOURCE_BUSY for "Device or resource busy" \n
- * - WIFI_DIRECT_ERROR_STRANGE_CLIENT for "Invalid Client" \n
- *
- *
- * \par Prospective Clients:
- * External Apps.
- *
- * \code
- *
- * #include <wifi-direct.h>
- *
- * void foo(void)
- * {
- * int result;
- *
- * result = wifi_direct_deactivate();
- *
- * if(result == WIFI_DIRECT_ERROR_NONE)......... // Deactivation is successful
- *
- *\endcode
- *
- *\remarks None.
- *
- ******************************************************************************/
+ * @brief Deactivates the Wi-Fi Direct service, asynchronous.
+ * @return 0 on success, otherwise a negative error value.
+ * @retval #WIFI_DIRECT_ERROR_NONE  Successful
+ * @retval #WIFI_DIRECT_ERROR_OPERATION_FAILED  Operation failed
+ * @retval #WIFI_DIRECT_ERROR_COMMUNICATION_FAILED  Communication failed
+ * @retval #WIFI_DIRECT_ERROR_NOT_PERMITTED  Operation not permitted
+ * @retval #WIFI_DIRECT_ERROR_NOT_INITIALIZED  Not initialized
+ * @retval #WIFI_DIRECT_ERROR_RESOURCE_BUSY  Device or resource busy
+ * @pre Wi-Fi Direct service must be activated by wifi_direct_activate().
+ * @post wifi_direct_device_state_changed_cb() will be invoked.
+ * @see wifi_direct_activate()
+ * @see wifi_direct_device_state_changed_cb()
+ */

 int wifi_direct_deactivate(void);
 
 int wifi_direct_deactivate(void);
 

-
-/*****************************************************************************************/
-/* wifi_direct_start_discovery API function prototype
- * int wifi_direct_start_discovery(bool listen_only, int timeout);
- */

 /**
 /**

- * \brief This API shall Start a discovery to find all P2P capable devices. \n
- *        Applications will be notified event via wifi_direct_discovery_state_chagned_cb(). \n
- *
- * @param listen_only    if true, skip the initial 802.11 scan and then enter
- *                       Listen state instead of cycling between Search and Listen.
- * @param timeout        Specifies the duration of discovery period, in seconds.
- *                       APs. If 0, a default value will be used, which depends on UX guideline.
- *
- * \pre Wireless adapter device must be already opened.
- *
- *
- * \see wifi_direct_get_discovery_result
- *
- * \par Sync (or) Async:
- * This is a Asynchronous API.
- *
- * \warning
- *  None
- *
- *
- * \par Async Response Message:
- *  - WIFI_DIRECT_DISCOVERY_STARTED : Application will receive this event via wifi_direct_discovery_state_chagned_cb (), when discover process (80211 Scan) started. \n
- *  - WIFI_DIRECT_ONLY_LISTEN_STARTED : Application will receive this event via wifi_direct_discovery_state_chagned_cb (), when discover process (listen only mode) started. \n
- *  - WIFI_DIRECT_DISCOVERY_FOUND : Application will receive this event via wifi_direct_discovery_state_chagned_cb (), when peer or group is found. \n
- *  - WIFI_DIRECT_DISCOVERY_FINISHED : Once the whole discovery process is completed, applications will receive it via wifi_direct_discovery_state_chagned_cb (). \n
- *                                 Applications may then call wifi_direct_foreach_discovered_peers() to get the final result.  \n
- *                                 With the intermediate or final list of P2P capable devices, applications can update their UI if needed. \n
- *                                 It is up to the applications to control how often to update their UI display. \n
- *
- *
- * \return Return Type (int) \n
- * - WIFI_DIRECT_ERROR_NONE on success \n
- * - WIFI_DIRECT_ERROR_OPERATION_FAILED for "Unkown error" \n
- * - WIFI_DIRECT_ERROR_OUT_OF_MEMORY for "Out of memory" \n
- * - WIFI_DIRECT_ERROR_COMMUNICATION_FAILED for "I/O error" \n
- * - WIFI_DIRECT_ERROR_NOT_PERMITTED for "Operation not permitted" \n
- * - WIFI_DIRECT_ERROR_INVALID_PARAMETER for "Invalid function parameter" \n
- * - WIFI_DIRECT_ERROR_RESOURCE_BUSY for "Device or resource busy" \n
- * - WIFI_DIRECT_ERROR_STRANGE_CLIENT for "Invalid Client" \n
- *
- *
- * \par Prospective Clients:
- * External Apps.
- *
- * \code
- *
- * #include <wifi-direct.h>
- *
- * void foo(void)
- * {
-
- * int result;
- *
- * result = wifi_direct_start_discovery(TRUE, 0);
- *
- * if(result == WIFI_DIRECT_ERROR_NONE)......... // discovery request is successful
- *
- *\endcode
- *
- *\remarks If discover is over, peer can not find the device and the device can not find peer, too. 
- * 
- ******************************************************************************/
+ * @brief Starts discovery to find all P2P capable devices, asynchronous.
+ * @param[in] listen_only  If true, skip the initial 802.11 Scan and then enter Listen state instead of cycling between Scan and Listen.
+ * @param[in] timeout  Specifies the duration of discovery period, in seconds. If 0, a default value will be used.
+ * @return 0 on success, otherwise a negative error value.
+ * @retval #WIFI_DIRECT_ERROR_NONE  Successful
+ * @retval #WIFI_DIRECT_ERROR_INVALID_PARAMETER  Invalid parameter
+ * @retval #WIFI_DIRECT_ERROR_OPERATION_FAILED  Operation failed
+ * @retval #WIFI_DIRECT_ERROR_COMMUNICATION_FAILED  Communication failed
+ * @retval #WIFI_DIRECT_ERROR_NOT_PERMITTED  Operation not permitted
+ * @retval #WIFI_DIRECT_ERROR_NOT_INITIALIZED  Not initialized
+ * @retval #WIFI_DIRECT_ERROR_RESOURCE_BUSY  Device or resource busy
+ * @pre Wi-Fi Direct service must be activated by wifi_direct_activate().
+ * @post wifi_direct_discovery_state_chagned_cb() will be invoked.
+ * @see wifi_direct_activate()
+ * @see wifi_direct_cancel_discovery()
+ * @see wifi_direct_discovery_state_chagned_cb()
+ */

 int wifi_direct_start_discovery(bool listen_only, int timeout);
 
 int wifi_direct_start_discovery(bool listen_only, int timeout);
 

-
-/*****************************************************************************************/
-/* wifi_direct_cancel_discovery API function prototype
- * int wifi_direct_cancel_discovery(void);
- */

 /**
 /**

- * \brief This API shall cancel the discovery process started from wifi_direct_start_discovery. \n
- *
- * \pre discovery process must be started.
- *
- * \post discovery process stopped.
- *
- * \see wifi_direct_client_start_discovery
- *
- * \par Sync (or) Async:
- * This is a Asynchronous API.
- *
- * \warning
- *  None
- *
- *
- * \par Async Response Message:
- *    - WIFI_DIRECT_DISCOVERY_FINISHED :  Applications will receive a this event
- *                                   via callback when the discovery process is cancelled or completed.
- *
- *
- * \return Return Type (int) \n
- * - WIFI_DIRECT_ERROR_NONE on success \n
- * - WIFI_DIRECT_ERROR_OPERATION_FAILED for "Unkown error" \n
- * - WIFI_DIRECT_ERROR_OUT_OF_MEMORY for "Out of memory" \n
- * - WIFI_DIRECT_ERROR_COMMUNICATION_FAILED for "I/O error" \n
- * - WIFI_DIRECT_ERROR_NOT_PERMITTED for "Operation not permitted" \n
- * - WIFI_DIRECT_ERROR_RESOURCE_BUSY for "Device or resource busy" \n
- * - WIFI_DIRECT_ERROR_STRANGE_CLIENT for "Invalid Client" \n
- *
- * \par Prospective Clients:
- * External Apps.
- *
- * \code
- *
- * #include <wifi-direct.h>
- *
- * void foo(void)
- * {
-
- * int result;
- *
- * result = wifi_direct_cancel_discovery();
- *
- * if(result == WIFI_DIRECT_ERROR_NONE)......... // discovery cancel request is successful
- *
- *\endcode
- *
- *\remarks None.
- *
- ******************************************************************************/
+ * @brief Cancels discovery process, asynchronous.
+ * @return 0 on success, otherwise a negative error value.
+ * @retval #WIFI_DIRECT_ERROR_NONE  Successful
+ * @retval #WIFI_DIRECT_ERROR_OPERATION_FAILED  Operation failed
+ * @retval #WIFI_DIRECT_ERROR_COMMUNICATION_FAILED  Communication failed
+ * @retval #WIFI_DIRECT_ERROR_NOT_PERMITTED  Operation not permitted
+ * @retval #WIFI_DIRECT_ERROR_NOT_INITIALIZED  Not initialized
+ * @retval #WIFI_DIRECT_ERROR_RESOURCE_BUSY  Device or resource busy
+ * @pre Discovery must be started by wifi_direct_start_discovery().
+ * @post wifi_direct_discovery_state_chagned_cb() will be invoked.
+ * @see wifi_direct_start_discovery()
+ * @see wifi_direct_discovery_state_chagned_cb()
+ */

 int wifi_direct_cancel_discovery(void);
 
 int wifi_direct_cancel_discovery(void);
 

-
-/**
- * discorverd peers notification callback function type. \n
- *
- * @param peer The discovered peer information.
- * @param user_data The user data passed from the foreach function.
- * @return @c true to continue with the next iteration of the loop,
- * \n @c false to break out of the loop.
- *
- * @pre wifi_direct_foreach_discovered_peers() will invoke this function.
- *
- * @see wifi_direct_foreach_discovered_peers()
- *
- */
+ /**
+  * @brief Called repeatedly when you get the information of discovered peers.
+  * @remarks @a peer is valid only in this function.
+  * @param[in] peer The information of discovered peer
+  * @param[in] user_data The user data passed from foreach function
+  * @return @c true to continue with the next iteration of the loop, \n @c false to break out of the loop
+  * @see wifi_direct_foreach_discovered_peers()
+  */

  typedef bool(*wifi_direct_discovered_peer_cb)(wifi_direct_discovered_peer_info_s* peer, void* user_data);
 
  typedef bool(*wifi_direct_discovered_peer_cb)(wifi_direct_discovered_peer_info_s* peer, void* user_data);
 

-
-/*****************************************************************************************/
-/* wifi_direct_foreach_discovered_peers API function prototype
- * int wifi_direct_foreach_discovered_peers(wifi_direct_discovered_peer_cb, void* user_data)
- */

 /**
 /**

- * \brief This API shall get the information of all discovered peers. \n
- *
- * @param callback The callback function to invoke.
- * @param user_data The user data passed from the foreach function.
- *
- * \see wifi_direct_discovered_peer_cb
- *
- * \par Sync (or) Async:
- * This is a Synchronous API.
- *
- * \warning
- *  None
- *
- * \return Return Type (int) \n
- * - WIFI_DIRECT_ERROR_NONE on success \n
- * - WIFI_DIRECT_ERROR_OPERATION_FAILED for "Unkown error" \n
- * - WIFI_DIRECT_ERROR_OUT_OF_MEMORY for "Out of memory" \n
- * - WIFI_DIRECT_ERROR_COMMUNICATION_FAILED for "I/O error" \n
- * - WIFI_DIRECT_ERROR_NOT_PERMITTED for "Operation not permitted" \n
- * - WIFI_DIRECT_ERROR_INVALID_PARAMETER for "Invalid function parameter" \n
- * - WIFI_DIRECT_ERROR_RESOURCE_BUSY for "Device or resource busy" \n
- * - WIFI_DIRECT_ERROR_STRANGE_CLIENT for "Invalid Client" \n
- *
- *
- * \par Prospective Clients:
- * External Apps.
- *
- * \code
- *
- * #include <wifi-direct.h>
- *
- * bool _cb_discovered_peers_impl(wifi_direct_discovered_peer_info_s* peer, void* user_data)
- * {
- *     struct appdata* ad = (struct appdata*) user_data;
- *     
- *     if(NULL != peer)
- *     {
- *             if ( ad->peer_count >= MAX_PEER_NUM )
- *                     return false;   // break out of the loop
- *
- *             memcpy(&ad->peer_list[ad->peer_count], peer, sizeof(wifi_direct_discovered_peer_info_s));
- *             ad->peer_count++;
- *     }
- *
- *     return true;    // continue with the next iteration of the loop
- * }
- *
- *
- * void foo()
- * {
- *     int result;
- *
- *     ad->peer_list = NULL;
- *     ad->peer_count = 0;
- *     ad ->selected_peer_index = 0;
- *     result = wifi_direct_foreach_discovered_peers(_cb_discovered_peers_impl, (void*)ad);
- *
- *     if(result == WIFI_DIRECT_ERROR_NONE)......... // get discovery result is successful
- *
- *\endcode
- *
- *\remarks None.
- *
- ******************************************************************************/
+ * @brief Gets the information of discovered peers.
+ * @param[in] callback  The callback function to invoke
+ * @param[in] user_data  The user data to be passed to the callback function
+ * @return 0 on success, otherwise a negative error value.
+ * @retval #WIFI_DIRECT_ERROR_NONE  Successful
+ * @retval #WIFI_DIRECT_ERROR_INVALID_PARAMETER  Invalid parameter
+ * @retval #WIFI_DIRECT_ERROR_OPERATION_FAILED  Operation failed
+ * @retval #WIFI_DIRECT_ERROR_COMMUNICATION_FAILED  Communication failed
+ * @retval #WIFI_DIRECT_ERROR_NOT_PERMITTED  Operation not permitted
+ * @retval #WIFI_DIRECT_ERROR_NOT_INITIALIZED  Not initialized
+ * @retval #WIFI_DIRECT_ERROR_RESOURCE_BUSY  Device or resource busy
+ * @pre Wi-Fi Direct service must be activated by wifi_direct_activate().
+ * @see wifi_direct_activate()
+ * @see wifi_direct_discovered_peer_cb()
+ */

 int wifi_direct_foreach_discovered_peers(wifi_direct_discovered_peer_cb callback, void* user_data);
 
 int wifi_direct_foreach_discovered_peers(wifi_direct_discovered_peer_cb callback, void* user_data);
 

-
-/*****************************************************************************************/
-/* wifi_direct_connect API function prototype
- * int wifi_direct_connect(const char* mac_address);
- */

 /**
 /**

- * \brief This API shall connect to specified peer by automatically determining whether to perform group \n
- * formation, join an existing group, invite, re-invoke a group. The decision is \n
- * based on the current state of the peers (i.e. GO, STA, not connected) and the \n
- * availability of persistent data. \n
- *
- * @param mac_addr Device address of target peer.
- *
- * \par Sync (or) Async:
- * This is a Asynchronous API.
- *
- * \warning
- *  None
- *
- *
- * \par Async Response Message:
- *    - WIFI_DIRECT_CONNECTION_IN_PROGRESS :  Applications will receive this event
- *                                   via callback when the connection process is started.
- *    - WIFI_DIRECT_CONNECTION_RSP :  Applications will receive this event
- *                                   via callback when the connection process is completed or failed.
- *
- * \return Return Type (int) \n
- * - WIFI_DIRECT_ERROR_NONE on success \n
- * - WIFI_DIRECT_ERROR_OPERATION_FAILED for "Unkown error" \n
- * - WIFI_DIRECT_ERROR_OUT_OF_MEMORY for "Out of memory" \n
- * - WIFI_DIRECT_ERROR_COMMUNICATION_FAILED for "I/O error" \n
- * - WIFI_DIRECT_ERROR_NOT_PERMITTED for "Operation not permitted" \n
- * - WIFI_DIRECT_ERROR_INVALID_PARAMETER for "Invalid function parameter" \n
- * - WIFI_DIRECT_ERROR_RESOURCE_BUSY for "Device or resource busy" \n
- * - WIFI_DIRECT_ERROR_CONNECTION_TIME_OUT for "Connection timed out" \n
- * - WIFI_DIRECT_ERROR_STRANGE_CLIENT for "Invalid Client" \n
- * - WIFI_DIRECT_ERROR_CONNECTION_FAILED for "Create Link fail" \n
- * - WIFI_DIRECT_ERROR_AUTH_FAILED for "Create Link Auth fail" \n
- *
- *
- * \par Prospective Clients:
- * External Apps.
- *
- * \code
- *
- * #include <wifi-direct.h>
- *
- * void foo(unsigned char* mac_addr)
- * {
-
- * int result;
- *
- * result = wifi_direct_connect(mac_addr);
- *
- * if(result == WIFI_DIRECT_ERROR_NONE)......... // connect request is successful
- *
- *\endcode
- *
- *\remarks This API will try to send provisioning request befre connecting.
- *
- ******************************************************************************/
+ * @brief Connects to a specified peer, asynchronous.
+ * @details This API connects to specified peer by automatically determining whether to perform group formation,
+ * join an existing group, invite, re-invoke a group.
+ * The decision is based on the current state of the peers (i.e. GO, STA, not connected) and the availability of persistent data.
+ * @param[in] mac_address  The MAC address of remote device
+ * @return 0 on success, otherwise a negative error value.
+ * @retval #WIFI_DIRECT_ERROR_NONE  Successful
+ * @retval #WIFI_DIRECT_ERROR_INVALID_PARAMETER  Invalid parameter
+ * @retval #WIFI_DIRECT_ERROR_OPERATION_FAILED  Operation failed
+ * @retval #WIFI_DIRECT_ERROR_COMMUNICATION_FAILED  Communication failed
+ * @retval #WIFI_DIRECT_ERROR_NOT_PERMITTED  Operation not permitted
+ * @retval #WIFI_DIRECT_ERROR_NOT_INITIALIZED  Not initialized
+ * @retval #WIFI_DIRECT_ERROR_TOO_MANY_CLIENT  Too many client
+ * @retval #WIFI_DIRECT_ERROR_CONNECTION_TIME_OUT  Connection timed out
+ * @retval #WIFI_DIRECT_ERROR_CONNECTION_FAILED  Connection failed
+ * @retval #WIFI_DIRECT_ERROR_AUTH_FAILED  Authentication failed
+ * @pre Wi-Fi Direct service must be activated by wifi_direct_activate().
+ * @post wifi_direct_connection_state_changed_cb() will be invoked.
+ * @see wifi_direct_activate()
+ * @see wifi_direct_disconnect()
+ * @see wifi_direct_disconnect_all()
+ * @see wifi_direct_connection_state_changed_cb()
+ */

 int wifi_direct_connect(const char* mac_address);
 
 int wifi_direct_connect(const char* mac_address);
 

-
-/*****************************************************************************************/
-/* wifi_direct_disconnect_all API function prototype
- * int wifi_direct_disconnect_all(void);
- */

 /**
 /**

- * \brief This API shall tear down all connected links to peers (stop soft AP, and close interface).  \n
- *
- * \see wifi_direct_connect
- *
- * \par Sync (or) Async:
- * This is a Asynchronous API.
- *
- * \warning
- *  None
- *
- *
- * \par Async Response Message:
- *    - WIFI_DIRECT_DISCONNECTION_RSP :  Applications will receive this event
- *                                   via callback when the disconnection process is completed.
- *                          
- *
- * \return Return Type (int) \n
- * - WIFI_DIRECT_ERROR_NONE on success \n
- * - WIFI_DIRECT_ERROR_OPERATION_FAILED for "Unkown error" \n
- * - WIFI_DIRECT_ERROR_OUT_OF_MEMORY for "Out of memory" \n
- * - WIFI_DIRECT_ERROR_COMMUNICATION_FAILED for "I/O error" \n
- * - WIFI_DIRECT_ERROR_NOT_PERMITTED for "Operation not permitted" \n
- * - WIFI_DIRECT_ERROR_RESOURCE_BUSY for "Device or resource busy" \n
- * - WIFI_DIRECT_ERROR_STRANGE_CLIENT for "Invalid Client" \n
- *
- *
- * \par Prospective Clients:
- * External Apps.
- *
- * \code
- *
- * #include <wifi-direct.h>
- *
- * void foo(void)
- * {
-
- * int result;
- *
- * result = wifi_direct_disconnect_all();
- *
- * if(result == WIFI_DIRECT_ERROR_NONE)......... // disconnect request is successful
- *
- *\endcode
- *
- *\remarks None.
- *
- ******************************************************************************/
+ * @brief Disconnects all connected links to peers, asynchronous.
+ * @return 0 on success, otherwise a negative error value.
+ * @retval #WIFI_DIRECT_ERROR_NONE  Successful
+ * @retval #WIFI_DIRECT_ERROR_OPERATION_FAILED  Operation failed
+ * @retval #WIFI_DIRECT_ERROR_COMMUNICATION_FAILED  Communication failed
+ * @retval #WIFI_DIRECT_ERROR_NOT_PERMITTED  Operation not permitted
+ * @retval #WIFI_DIRECT_ERROR_NOT_INITIALIZED  Not initialized
+ * @retval #WIFI_DIRECT_ERROR_RESOURCE_BUSY  Device or resource busy
+ * @pre Wi-Fi Direct service must be activated by wifi_direct_activate().
+ * @post wifi_direct_connection_state_changed_cb() will be invoked.
+ * @see wifi_direct_activate()
+ * @see wifi_direct_disconnect()
+ * @see wifi_direct_connection_state_changed_cb()
+ */

 int wifi_direct_disconnect_all(void);
 
 int wifi_direct_disconnect_all(void);
 

-
-
-/*****************************************************************************************/
-/* wifi_direct_disconnect API function prototype
- * int wifi_direct_disconnect(const char* mac_address);
- */

 /**
 /**

- * \brief This API shall disconnect the specified peer by mac address. 
- *
- * @param mac_addr Device address of target peer.
- *
- * \see
- *
- * \par Sync (or) Async:
- * This is a Asynchronous API.
- *
- * \warning
- *  None
- *
- *
- * \par Async Response Message:
- *    - WIFI_DIRECT_DISCONNECTION_RSP :  Applications will receive a this event
- *                                   via callback when a peer is disconnected.
- *
- * \return Return Type (int) \n
- * - WIFI_DIRECT_ERROR_NONE on success \n
- * - WIFI_DIRECT_ERROR_OPERATION_FAILED for "Unkown error" \n
- * - WIFI_DIRECT_ERROR_OUT_OF_MEMORY for "Out of memory" \n
- * - WIFI_DIRECT_ERROR_COMMUNICATION_FAILED for "I/O error" \n
- * - WIFI_DIRECT_ERROR_NOT_PERMITTED for "Operation not permitted" \n
- * - WIFI_DIRECT_ERROR_INVALID_PARAMETER for "Invalid function parameter" \n
- * - WIFI_DIRECT_ERROR_RESOURCE_BUSY for "Device or resource busy" \n
- * - WIFI_DIRECT_ERROR_STRANGE_CLIENT for "Invalid Client" \n
- *
- *
- * \par Prospective Clients:
- * External Apps.
- *
- * \code
- *
- * #include <wifi-direct.h>
- *
- * void foo(unsigned char* mac_addr)
- * {
-
- * int result;
- *
- * result = wifi_direct_disconnect(mac_addr);
- *
- * if(result == WIFI_DIRECT_ERROR_NONE)......... // disconnect request is successful
- *
- *\endcode
- *
- *\remarks None.
- *
- ******************************************************************************/
+ * @brief Disconnects the specified peer, asynchronous.
+ * @param[in] mac_address  The MAC address of remote device
+ * @return 0 on success, otherwise a negative error value.
+ * @retval #WIFI_DIRECT_ERROR_NONE  Successful
+ * @retval #WIFI_DIRECT_ERROR_INVALID_PARAMETER  Invalid parameter
+ * @retval #WIFI_DIRECT_ERROR_OPERATION_FAILED  Operation failed
+ * @retval #WIFI_DIRECT_ERROR_COMMUNICATION_FAILED  Communication failed
+ * @retval #WIFI_DIRECT_ERROR_NOT_PERMITTED  Operation not permitted
+ * @retval #WIFI_DIRECT_ERROR_NOT_INITIALIZED  Not initialized
+ * @retval #WIFI_DIRECT_ERROR_RESOURCE_BUSY  Device or resource busy
+ * @pre Wi-Fi Direct service must be activated by wifi_direct_activate().
+ * @post wifi_direct_connection_state_changed_cb() will be invoked.
+ * @see wifi_direct_activate()
+ * @see wifi_direct_disconnect()
+ * @see wifi_direct_connection_state_changed_cb()
+ */

 int wifi_direct_disconnect(const char* mac_address);
 
 int wifi_direct_disconnect(const char* mac_address);
 

-
-

 /**
 /**

- * connected peers notification callback function type. \n
- *
- * @param peer The connected peer information.
- * @param user_data The user data passed from the foreach function.
- * @return @c true to continue with the next iteration of the loop,
- * \n @c false to break out of the loop.
- *
- * @pre wifi_direct_foreach_connected_peers() will invoke this function.
- *
+ * @brief Called repeatedly when you get the information of connected peers.
+ * @remarks @a peer is valid only in this function.
+ * @param[in] peer The information of discovered peer
+ * @param[in] user_data The user data passed from foreach function
+ * @return @c true to continue with the next iteration of the loop, \n @c false to break out of the loop

  * @see wifi_direct_foreach_connected_peers()
  * @see wifi_direct_foreach_connected_peers()

- *

  */
 typedef bool(*wifi_direct_connected_peer_cb)(wifi_direct_connected_peer_info_s* peer, void* user_data);
 
  */
 typedef bool(*wifi_direct_connected_peer_cb)(wifi_direct_connected_peer_info_s* peer, void* user_data);
 

-
-/*****************************************************************************************/
-/* wifi_direct_foreach_connected_peers API function prototype
- * int wifi_direct_foreach_connected_peers(wifi_direct_connected_peer_cb, void* user_data)
- */

 /**
 /**

- * \brief This API shall get the information of all connected peers. \n
- *
- * @param callback The callback function to invoke.
- * @param user_data The user data passed from the foreach function.
- *
- * \see wifi_direct_connected_peer_cb
- *
- * \par Sync (or) Async:
- * This is a Synchronous API.
- *
- * \warning
- *  None
- *
- * \return Return Type (int) \n
- * - WIFI_DIRECT_ERROR_NONE on success \n
- * - WIFI_DIRECT_ERROR_OPERATION_FAILED for "Unkown error" \n
- * - WIFI_DIRECT_ERROR_OUT_OF_MEMORY for "Out of memory" \n
- * - WIFI_DIRECT_ERROR_COMMUNICATION_FAILED for "I/O error" \n
- * - WIFI_DIRECT_ERROR_NOT_PERMITTED for "Operation not permitted" \n
- * - WIFI_DIRECT_ERROR_INVALID_PARAMETER for "Invalid function parameter" \n
- * - WIFI_DIRECT_ERROR_RESOURCE_BUSY for "Device or resource busy" \n
- * - WIFI_DIRECT_ERROR_STRANGE_CLIENT for "Invalid Client" \n
- *
- * \par Prospective Clients:
- * External Apps.
- *
- * \code
- *
- * #include <wifi-direct.h>
- *
- * bool _cb_connected_peers_impl(wifi_direct_connected_peer_info_s* peer, void* user_data)
- *{
- *     
- *     struct appdata* ad = (struct appdata*) user_data;
- *
- *     if(NULL != peer)
- *     {
- *             if ( ad->connected_peer_count >= MAX_PEER_NUM )
- *                     return false;   // break out of the loop
- *             
- *             memcpy(&ad->connected_peer_list[ad->connected_peer_count], peer, sizeof(wifi_direct_connected_peer_info_s));
- *             ad->connected_peer_count++;
- *             
- *     }
- *
- *     return true;    // continue with the next iteration of the loop
- *}
- *
- * void foo()
- * {
- *     int result;
- *
- *     ad->connected_peer_list = NULL;
- *     ad->connected_peer_count = 0;
- *
- *     result = wifi_direct_foreach_connected_peers(_cb_connected_peers_impl, (void*)ad);
- *
- * if(result == WIFI_DIRECT_ERROR_NONE)......... // get discovery result is successful
- *
- *\endcode
- *
- *\remarks None.
- *
- ******************************************************************************/
+ * @brief Gets the information of connected peers.
+ * @param[in] callback  The callback function to invoke
+ * @param[in] user_data  The user data to be passed to the callback function
+ * @return 0 on success, otherwise a negative error value.
+ * @retval #WIFI_DIRECT_ERROR_NONE  Successful
+ * @retval #WIFI_DIRECT_ERROR_INVALID_PARAMETER  Invalid parameter
+ * @retval #WIFI_DIRECT_ERROR_OPERATION_FAILED  Operation failed
+ * @retval #WIFI_DIRECT_ERROR_COMMUNICATION_FAILED  Communication failed
+ * @retval #WIFI_DIRECT_ERROR_NOT_PERMITTED  Operation not permitted
+ * @retval #WIFI_DIRECT_ERROR_NOT_INITIALIZED  Not initialized
+ * @retval #WIFI_DIRECT_ERROR_RESOURCE_BUSY  Device or resource busy
+ * @pre Wi-Fi Direct service must be activated by wifi_direct_activate().
+ * @see wifi_direct_activate()
+ * @see wifi_direct_discovered_peer_cb()
+ */

 int wifi_direct_foreach_connected_peers(wifi_direct_connected_peer_cb callback, void* user_data);
 
 int wifi_direct_foreach_connected_peers(wifi_direct_connected_peer_cb callback, void* user_data);
 

-
-
-/*****************************************************************************************/
-/* wifi_direct_create_group API function prototype
- * int wifi_direct_create_group();
- */

 /**
 /**

- * \brief This API shall set up device as a Group Owner and wait for clients to connect. \n
- * Create a soft AP, start the WPS registrar, start the DHCP server. \n
- *
- * \see wifi_direct_destroy_group
- *
- * \par Sync (or) Async:
- * This is a Asynchronous API.
- *
- * \warning
- *  None
- *
- *
- * \par Async Response Message:
- *    - WIFI_DIRECT_GROUP_CREATED :  Applications will receive this event
- *                                   via callback when the group creating request is successful. \n
- *                               Errorcode will be set to the WFD_ERROR_CREATE_LINK_FAIL value. \n
- *
- * \return Return Type (int) \n
- * - WIFI_DIRECT_ERROR_NONE on success \n
- * - WIFI_DIRECT_ERROR_OPERATION_FAILED for "Unkown error" \n
- * - WIFI_DIRECT_ERROR_OUT_OF_MEMORY for "Out of memory" \n
- * - WIFI_DIRECT_ERROR_COMMUNICATION_FAILED for "I/O error" \n
- * - WIFI_DIRECT_ERROR_NOT_PERMITTED for "Operation not permitted" \n
- * - WIFI_DIRECT_ERROR_RESOURCE_BUSY for "Device or resource busy" \n
- * - WIFI_DIRECT_ERROR_STRANGE_CLIENT for "Invalid Client" \n
- * - WIFI_DIRECT_ERROR_CONNECTION_FAILED for "Create Link fail" \n
- * - WIFI_DIRECT_ERROR_AUTH_FAILED for "Create Link Auth fail" \n
- *
- *
- * \par Prospective Clients:
- * External Apps.
- *
- * \code
- *
- * #include <wifi-direct.h>
- *
- * void foo()
- * {
-
- * int result;
- *
- * result = wifi_direct_create_group();
- *
- * if(result == WIFI_DIRECT_ERROR_NONE)......... // create group request is successful
- *
- *\endcode
- *
- *\remarks None.
- *
- ******************************************************************************/
+ * @brief Creates a Wi-Fi Direct Group, asynchronous.
+ * @details This API sets up device as a Group Owner and wait for clients to connect.
+ * In addition, a soft AP will be created, the WPS registrar and the DHCP server will be started.
+ * @return 0 on success, otherwise a negative error value.
+ * @retval #WIFI_DIRECT_ERROR_NONE  Successful
+ * @retval #WIFI_DIRECT_ERROR_OPERATION_FAILED  Operation failed
+ * @retval #WIFI_DIRECT_ERROR_COMMUNICATION_FAILED  Communication failed
+ * @retval #WIFI_DIRECT_ERROR_NOT_PERMITTED  Operation not permitted
+ * @retval #WIFI_DIRECT_ERROR_NOT_INITIALIZED  Not initialized
+ * @retval #WIFI_DIRECT_ERROR_RESOURCE_BUSY  Device or resource busy
+ * @retval #WIFI_DIRECT_ERROR_AUTH_FAILED  Authentication failed
+ * @pre Wi-Fi Direct service must be activated by wifi_direct_activate().
+ * @post wifi_direct_connection_state_changed_cb() will be invoked with WIFI_DIRECT_GROUP_CREATED.
+ * @see wifi_direct_activate()
+ * @see wifi_direct_destroy_group()
+ * @see wifi_direct_connection_state_changed_cb()
+ */

 int wifi_direct_create_group(void);
 
 int wifi_direct_create_group(void);
 

-
-
-/*****************************************************************************************/
-/* wifi_direct_destroy_group API function prototype
- * int wifi_direct_destroy_group();
- */

 /**
 /**

- * \brief This API shall cancel P2P Group create or tear down a P2P Group that we own. \n
- *
- * \see wifi_direct_create_group
- *
- * \par Sync (or) Async:
- * This is a Asynchronous API.
- *
- * \warning
- *  None
- *
- *
- * \par Async Response Message:
- *    - WIFI_DIRECT_GROUP_DESTROYED :  Applications will receive this event via callback when the group is cancelled. \n
- *
- * \return Return Type (int) \n
- * - WIFI_DIRECT_ERROR_NONE on success \n
- * - WIFI_DIRECT_ERROR_OPERATION_FAILED for "Unkown error" \n
- * - WIFI_DIRECT_ERROR_OUT_OF_MEMORY for "Out of memory" \n
- * - WIFI_DIRECT_ERROR_COMMUNICATION_FAILED for "I/O error" \n
- * - WIFI_DIRECT_ERROR_NOT_PERMITTED for "Operation not permitted" \n
- * - WIFI_DIRECT_ERROR_RESOURCE_BUSY for "Device or resource busy" \n
- * - WIFI_DIRECT_ERROR_STRANGE_CLIENT for "Invalid Client" \n
- * - WIFI_DIRECT_ERROR_CONNECTION_FAILED for "Create Link fail" \n
- * - WIFI_DIRECT_ERROR_AUTH_FAILED for "Create Link Auth fail" \n
- *
- *
- * \par Prospective Clients:
- * External Apps.
- *
- * \code
- *
- * #include <wifi-direct.h>
- *
- * void foo()
- * {
-
- * int result;
- *
- * result = wifi_direct_destroy_group();
- *
- * if(result == WIFI_DIRECT_ERROR_NONE)......... // cancel group request is successful
- *
- *\endcode
- *
- *\remarks None.
- *
- ******************************************************************************/
+ * @brief Destorys the Wi-Fi Direct Group, asynchronous.
+ * @details This API destroys the Wi-Fi Direct Group owned by local device.
+ * If creating a Group is in progress, this API cancels that creating.
+ * @return 0 on success, otherwise a negative error value.
+ * @retval #WIFI_DIRECT_ERROR_NONE  Successful
+ * @retval #WIFI_DIRECT_ERROR_OPERATION_FAILED  Operation failed
+ * @retval #WIFI_DIRECT_ERROR_COMMUNICATION_FAILED  Communication failed
+ * @retval #WIFI_DIRECT_ERROR_NOT_PERMITTED  Operation not permitted
+ * @retval #WIFI_DIRECT_ERROR_NOT_INITIALIZED  Not initialized
+ * @retval #WIFI_DIRECT_ERROR_RESOURCE_BUSY  Device or resource busy
+ * @retval #WIFI_DIRECT_ERROR_AUTH_FAILED  Authentication failed
+ * @pre Wi-Fi Direct service must be activated by wifi_direct_activate().
+ * @post wifi_direct_connection_state_changed_cb() will be invoked with WIFI_DIRECT_GROUP_DESTROYED.
+ * @see wifi_direct_activate()
+ * @see wifi_direct_create_group()
+ * @see wifi_direct_connection_state_changed_cb()
+ */

 int wifi_direct_destroy_group(void);
 
 int wifi_direct_destroy_group(void);
 

-
-/*****************************************************************************************/
-/* wifi_direct_is_group_owner API function prototype
- * int wifi_direct_is_group_owner(bool *owner);
- */

 /**
 /**

- * \brief This API shall check whether the currunt client is group owner or not.
- * @param owner              Memory to store the value of TURE or FALSE. Application must allocate memory.
- *
- * \see wifi_direct_create_group
- *
- * \par Sync (or) Async:
- * This is a Synchronous API.
- *
- * \warning
- *  None
- *
- * \return Return Type (int) \n
- * - WIFI_DIRECT_ERROR_NONE on success \n
- * - WIFI_DIRECT_ERROR_OPERATION_FAILED for "Unkown error" \n
- * - WIFI_DIRECT_ERROR_OUT_OF_MEMORY for "Out of memory" \n
- * - WIFI_DIRECT_ERROR_COMMUNICATION_FAILED for "I/O error" \n
- * - WIFI_DIRECT_ERROR_NOT_PERMITTED for "Operation not permitted" \n
- * - WIFI_DIRECT_ERROR_INVALID_PARAMETER for "Invalid function parameter" \n
- * - WIFI_DIRECT_ERROR_RESOURCE_BUSY for "Device or resource busy" \n
- * - WIFI_DIRECT_ERROR_STRANGE_CLIENT for "Invalid Client" \n
- *
- * \par Prospective Clients:
- * External Apps.
- *
- * \code
- *
- * #include <wifi-direct.h>
- *
- * void foo(void)
- * {
-
- * int result;
- * bool owner;
- *
- * result = wifi_direct_is_group_owner(&owner);
- *
- *
- * if(result == WIFI_DIRECT_ERROR_NONE)......... // checking the value is successful
- *
- *\endcode
- *
- *\remarks None.
- *
- ******************************************************************************/
+ * @brief Checks whether this device is group owner or not.
+ * @param[out] is_group_owner  Indicats whether this device is group owner or not
+ * @return 0 on success, otherwise a negative error value.
+ * @retval #WIFI_DIRECT_ERROR_NONE  Successful
+ * @retval #WIFI_DIRECT_ERROR_INVALID_PARAMETER  Invalid parameter
+ * @retval #WIFI_DIRECT_ERROR_OPERATION_FAILED  Operation failed
+ * @retval #WIFI_DIRECT_ERROR_COMMUNICATION_FAILED  Communication failed
+ * @retval #WIFI_DIRECT_ERROR_NOT_PERMITTED  Operation not permitted
+ * @retval #WIFI_DIRECT_ERROR_NOT_INITIALIZED  Not initialized
+ * @retval #WIFI_DIRECT_ERROR_RESOURCE_BUSY  Device or resource busy
+ * @pre Wi-Fi Direct service must be activated by wifi_direct_activate().
+ * @see wifi_direct_activate()
+ */

 int wifi_direct_is_group_owner(bool* is_group_owner);
 
 int wifi_direct_is_group_owner(bool* is_group_owner);
 

+/**
+ * @brief Checks whether the currunt group is autonomous group or not.
+ * @details If you create a group by wifi_direct_create_group(), then the current group is autonomous group.
+ * @param[out] is_autonomous_group  Indicats whether the currunt group is autonomous group or not
+ * @return 0 on success, otherwise a negative error value.
+ * @retval #WIFI_DIRECT_ERROR_NONE  Successful
+ * @retval #WIFI_DIRECT_ERROR_INVALID_PARAMETER  Invalid parameter
+ * @retval #WIFI_DIRECT_ERROR_OPERATION_FAILED  Operation failed
+ * @retval #WIFI_DIRECT_ERROR_COMMUNICATION_FAILED  Communication failed
+ * @retval #WIFI_DIRECT_ERROR_NOT_PERMITTED  Operation not permitted
+ * @retval #WIFI_DIRECT_ERROR_NOT_INITIALIZED  Not initialized
+ * @retval #WIFI_DIRECT_ERROR_RESOURCE_BUSY  Device or resource busy
+ * @pre Wi-Fi Direct service must be activated by wifi_direct_activate().
+ * @see wifi_direct_activate()
+ * @see wifi_direct_create_group()
+ * @see wifi_direct_destroy_group()
+ */
+int wifi_direct_is_autonomous_group(bool* is_autonomous_group);

 
 

+/**
+ * @brief Sets SSID(Service Set Identifier) of local device.
+ * @param[in] ssid  The SSID to set
+ * @return 0 on success, otherwise a negative error value.
+ * @retval #WIFI_DIRECT_ERROR_NONE  Successful
+ * @retval #WIFI_DIRECT_ERROR_INVALID_PARAMETER  Invalid parameter
+ * @retval #WIFI_DIRECT_ERROR_OPERATION_FAILED  Operation failed
+ * @retval #WIFI_DIRECT_ERROR_COMMUNICATION_FAILED  Communication failed
+ * @retval #WIFI_DIRECT_ERROR_NOT_PERMITTED  Operation not permitteds
+ * @retval #WIFI_DIRECT_ERROR_NOT_INITIALIZED  Not initialized
+ * @retval #WIFI_DIRECT_ERROR_RESOURCE_BUSY  Device or resource busy
+ * @pre Wi-Fi Direct service must be initialized by wifi_direct_initialize().
+ * @see wifi_direct_initialize()
+ */
+int wifi_direct_set_ssid(const char* ssid);

 
 

-/*****************************************************************************************/
-/* wifi_direct_is_autonomous_group API function prototype
- * int wifi_direct_is_autonomous_group(bool *autonomous_group);
+/**
+ * @brief Gets SSID(Service Set Identifier) of local device.
+ * @remarks @a ssid must be released with free() by you.
+ * @param[out] ssid  The SSID
+ * @return 0 on success, otherwise a negative error value.
+ * @retval #WIFI_DIRECT_ERROR_NONE  Successful
+ * @retval #WIFI_DIRECT_ERROR_INVALID_PARAMETER  Invalid parameter
+ * @retval #WIFI_DIRECT_ERROR_OPERATION_FAILED  Operation failed
+ * @retval #WIFI_DIRECT_ERROR_OUT_OF_MEMORY  Out of memory
+ * @retval #WIFI_DIRECT_ERROR_COMMUNICATION_FAILED  Communication failed
+ * @retval #WIFI_DIRECT_ERROR_NOT_PERMITTED  Operation not permitted
+ * @retval #WIFI_DIRECT_ERROR_NOT_INITIALIZED  Not initialized
+ * @retval #WIFI_DIRECT_ERROR_RESOURCE_BUSY  Device or resource busy
+ * @pre Wi-Fi Direct service must be initialized by wifi_direct_initialize().
+ * @see wifi_direct_initialize()

  */
  */

+int wifi_direct_get_ssid(char** ssid);
+

 /**
 /**

- * \brief This API shall check whether the currunt group is autonomous group or not.
- * @param autonomous_group              Memory to store the value of TURE or FALSE. Application must allocate memory.
- *
- * \see wifi_direct_create_group
- *
- * \par Sync (or) Async:
- * This is a Synchronous API.
- *
- * \warning
- *  None
- *
- * \return Return Type (int) \n
- * - WIFI_DIRECT_ERROR_NONE on success \n
- * - WIFI_DIRECT_ERROR_OPERATION_FAILED for "Unkown error" \n
- * - WIFI_DIRECT_ERROR_OUT_OF_MEMORY for "Out of memory" \n
- * - WIFI_DIRECT_ERROR_COMMUNICATION_FAILED for "I/O error" \n
- * - WIFI_DIRECT_ERROR_NOT_PERMITTED for "Operation not permitted" \n
- * - WIFI_DIRECT_ERROR_INVALID_PARAMETER for "Invalid function parameter" \n
- * - WIFI_DIRECT_ERROR_RESOURCE_BUSY for "Device or resource busy" \n
- * - WIFI_DIRECT_ERROR_STRANGE_CLIENT for "Invalid Client" \n
- *
- * \par Prospective Clients:
- * External Apps.
- *
- * \code
- *
- * #include <wifi-direct.h>
- *
- * void foo(void)
- * {
-
- * int result;
- * bool autonomous_group;
- *
- * result = wifi_direct_is_autonomous_group(&autonomous_group);
- *
- *
- * if(result == WIFI_DIRECT_ERROR_NONE)......... // checking the value is successful
- *
- *\endcode
- *
- *\remarks None.
- *
- ******************************************************************************/
-int wifi_direct_is_autonomous_group(bool* is_autonomous_group);
+ * @brief Gets the name of network interface. For example, eth0 and pdp0.
+ * @remarks @a name must be released with free() by you.
+ * @param[out] name  The name of network interface
+ * @return 0 on success, otherwise negative error value.
+ * @retval #WIFI_DIRECT_ERROR_NONE  Successful
+ * @retval #WIFI_DIRECT_ERROR_INVALID_PARAMETER  Invalid parameter
+ * @retval #WIFI_DIRECT_ERROR_OPERATION_FAILED  Operation failed
+ * @retval #WIFI_DIRECT_ERROR_OUT_OF_MEMORY  Out of memory
+ * @retval #WIFI_DIRECT_ERROR_COMMUNICATION_FAILED  Communication failed
+ * @retval #WIFI_DIRECT_ERROR_NOT_PERMITTED  Operation not permitted
+ * @retval #WIFI_DIRECT_ERROR_NOT_INITIALIZED  Not initialized
+ * @retval #WIFI_DIRECT_ERROR_RESOURCE_BUSY  Device or resource busy
+ * @pre Wi-Fi Direct service must be activated by wifi_direct_activate().
+ * @see wifi_direct_activate()
+ */
+int wifi_direct_get_network_interface_name(char** name);

 
 

+/**
+ * @brief Gets IP address of local device.
+ * @remarks @a ip_address must be released with free() by you.
+ * @param[out] ip_address  The IP address
+ * @return 0 on success, otherwise a negative error value.
+ * @retval #WIFI_DIRECT_ERROR_NONE  Successful
+ * @retval #WIFI_DIRECT_ERROR_INVALID_PARAMETER  Invalid parameter
+ * @retval #WIFI_DIRECT_ERROR_OPERATION_FAILED  Operation failed
+ * @retval #WIFI_DIRECT_ERROR_OUT_OF_MEMORY  Out of memory
+ * @retval #WIFI_DIRECT_ERROR_COMMUNICATION_FAILED  Communication failed
+ * @retval #WIFI_DIRECT_ERROR_NOT_PERMITTED  Operation not permitted
+ * @retval #WIFI_DIRECT_ERROR_NOT_INITIALIZED  Not initialized
+ * @retval #WIFI_DIRECT_ERROR_RESOURCE_BUSY  Device or resource busy
+ * @pre Wi-Fi Direct service must be activated by wifi_direct_activate().
+ * @see wifi_direct_activate()
+ */
+int wifi_direct_get_ip_address(char** ip_address);

 
 

+/**
+ * @brief Gets the Subnet Mask.
+ * @remarks @a subnet_mask must be released with free() by you.
+ * @param[out] subnet_mask  The subnet mask
+ * @return 0 on success, otherwise negative error value.
+ * @retval #WIFI_DIRECT_ERROR_NONE  Successful
+ * @retval #WIFI_DIRECT_ERROR_INVALID_PARAMETER  Invalid parameter
+ * @retval #WIFI_DIRECT_ERROR_OPERATION_FAILED  Operation failed
+ * @retval #WIFI_DIRECT_ERROR_OUT_OF_MEMORY  Out of memory
+ * @retval #WIFI_DIRECT_ERROR_COMMUNICATION_FAILED  Communication failed
+ * @retval #WIFI_DIRECT_ERROR_NOT_PERMITTED  Operation not permitted
+ * @retval #WIFI_DIRECT_ERROR_NOT_INITIALIZED  Not initialized
+ * @retval #WIFI_DIRECT_ERROR_RESOURCE_BUSY  Device or resource busy
+ * @pre Wi-Fi Direct service must be activated by wifi_direct_activate().
+ * @see wifi_direct_activate()
+ */
+int wifi_direct_get_subnet_mask(char** subnet_mask);

 
 

+/**
+ * @brief Gets the Gateway address.
+ * @remarks @a gateway_address must be released with free() by you.
+ * @param[out] gateway_address  The gateway address
+ * @return 0 on success, otherwise negative error value.
+ * @retval #WIFI_DIRECT_ERROR_NONE  Successful
+ * @retval #WIFI_DIRECT_ERROR_INVALID_PARAMETER  Invalid parameter
+ * @retval #WIFI_DIRECT_ERROR_OPERATION_FAILED  Operation failed
+ * @retval #WIFI_DIRECT_ERROR_OUT_OF_MEMORY  Out of memory
+ * @retval #WIFI_DIRECT_ERROR_COMMUNICATION_FAILED  Communication failed
+ * @retval #WIFI_DIRECT_ERROR_NOT_PERMITTED  Operation not permitted
+ * @retval #WIFI_DIRECT_ERROR_NOT_INITIALIZED  Not initialized
+ * @retval #WIFI_DIRECT_ERROR_RESOURCE_BUSY  Device or resource busy
+ * @pre Wi-Fi Direct service must be activated by wifi_direct_activate().
+ * @see wifi_direct_activate()
+ */
+int wifi_direct_get_gateway_address(char** gateway_address);

 
 

-/*****************************************************************************************/
-/* wifi_direct_set_ssid API function prototype
- * int wifi_direct_set_ssid(const char* ssid);
+/**
+ * @brief Gets MAC address of local device.
+ * @remarks @a mac_address must be released with free() by you.
+ * @param[out] mac_address  The MAC address
+ * @return 0 on success, otherwise a negative error value.
+ * @retval #WIFI_DIRECT_ERROR_NONE  Successful
+ * @retval #WIFI_DIRECT_ERROR_INVALID_PARAMETER  Invalid parameter
+ * @retval #WIFI_DIRECT_ERROR_OPERATION_FAILED  Operation failed
+ * @retval #WIFI_DIRECT_ERROR_OUT_OF_MEMORY  Out of memory
+ * @retval #WIFI_DIRECT_ERROR_COMMUNICATION_FAILED  Communication failed
+ * @retval #WIFI_DIRECT_ERROR_NOT_PERMITTED  Operation not permitted
+ * @retval #WIFI_DIRECT_ERROR_NOT_INITIALIZED  Not initialized
+ * @retval #WIFI_DIRECT_ERROR_RESOURCE_BUSY  Device or resource busy
+ * @pre Wi-Fi Direct service must be initialized by wifi_direct_initialize().
+ * @see wifi_direct_initialize()

  */
  */

+int wifi_direct_get_mac_address(char** mac_address);
+

 /**
 /**

- * \brief This API shall set or update ssid of local device. \n 
- * @param ssid              new ssid to set. Application must set the new ssid before.
- *
- * \see wifi_direct_get_ssid
- *
- * \par Sync (or) Async:
- * This is a Synchronous API.
- *
- * \warning
- *  None
- *
- *
- * \return Return Type (int) \n
- * - WIFI_DIRECT_ERROR_NONE on success \n
- * - WIFI_DIRECT_ERROR_OPERATION_FAILED for "Unkown error" \n
- * - WIFI_DIRECT_ERROR_OUT_OF_MEMORY for "Out of memory" \n
- * - WIFI_DIRECT_ERROR_COMMUNICATION_FAILED for "I/O error" \n
- * - WIFI_DIRECT_ERROR_NOT_PERMITTED for "Operation not permitted" \n
- * - WIFI_DIRECT_ERROR_INVALID_PARAMETER for "Invalid function parameter" \n
- * - WIFI_DIRECT_ERROR_RESOURCE_BUSY for "Device or resource busy" \n
- * - WIFI_DIRECT_ERROR_STRANGE_CLIENT for "Invalid Client" \n
- *
- *
- * \par Prospective Clients:
- * External Apps.
- *
- * \code
- *
- * #include <wifi-direct.h>
- *
- * void foo()
- * {
- * int  result;
- * char ssid[11] = {0,};
- *
- * memset(pin, 0x00, sizeof(pin));
- * printf("Input 8 digit PIN number :\n");
- * scanf("%s", pin);
- *
- *if( strlen(ssid) > 0 )
- *     result = wifi_direct_set_ssid(ssid);
- * 
- * if(result == WIFI_DIRECT_ERROR_NONE)......... // setting ssid is successful
- *
- *\endcode
- *
- *\remarks When the wifi direct is re-activated, ssid will be reset to the device name. \n
- *             
- *
- ******************************************************************************/
-int wifi_direct_set_ssid(const char* ssid);
+ * @brief Gets the state of Wi-Fi Direct service.
+ * @param[out] state  The state of Wi-Fi Direct service
+ * @return 0 on success, otherwise a negative error value.
+ * @retval #WIFI_DIRECT_ERROR_NONE  Successful
+ * @retval #WIFI_DIRECT_ERROR_INVALID_PARAMETER  Invalid parameter
+ * @retval #WIFI_DIRECT_ERROR_OPERATION_FAILED  Operation failed
+ * @retval #WIFI_DIRECT_ERROR_COMMUNICATION_FAILED  Communication failed
+ * @retval #WIFI_DIRECT_ERROR_NOT_PERMITTED  Operation not permitted
+ * @retval #WIFI_DIRECT_ERROR_NOT_INITIALIZED  Not initialized
+ * @retval #WIFI_DIRECT_ERROR_RESOURCE_BUSY  Device or resource busy
+ * @pre Wi-Fi Direct service must be initialized by wifi_direct_initialize().
+ * @see wifi_direct_initialize()
+ */
+int wifi_direct_get_state(wifi_direct_state_e* state);

 
 

+/**
+ * @brief Checks whether this device is discoverable or not.
+ * @param[out] discoverable  Indicats whether this device is discoverable or not
+ * @return 0 on success, otherwise a negative error value.
+ * @retval #WIFI_DIRECT_ERROR_NONE  Successful
+ * @retval #WIFI_DIRECT_ERROR_INVALID_PARAMETER  Invalid parameter
+ * @retval #WIFI_DIRECT_ERROR_OPERATION_FAILED  Operation failed
+ * @retval #WIFI_DIRECT_ERROR_COMMUNICATION_FAILED  Communication failed
+ * @retval #WIFI_DIRECT_ERROR_NOT_PERMITTED  Operation not permitted
+ * @retval #WIFI_DIRECT_ERROR_NOT_INITIALIZED  Not initialized
+ * @retval #WIFI_DIRECT_ERROR_RESOURCE_BUSY  Device or resource busy
+ * @pre Wi-Fi Direct service must be initialized by wifi_direct_initialize().
+ * @see wifi_direct_initialize()
+ */
+int wifi_direct_is_discoverable(bool* discoverable);

 
 

-/*****************************************************************************************/
-/* wifi_direct_get_ssid API function prototype
- * int wifi_direct_get_ssid(char** ssid)
+/**
+ * @brief Gets the primary device type of local device.
+ * @param[out] type  The primary device type
+ * @return 0 on success, otherwise a negative error value.
+ * @retval #WIFI_DIRECT_ERROR_NONE  Successful
+ * @retval #WIFI_DIRECT_ERROR_INVALID_PARAMETER  Invalid parameter
+ * @retval #WIFI_DIRECT_ERROR_OPERATION_FAILED  Operation failed
+ * @retval #WIFI_DIRECT_ERROR_COMMUNICATION_FAILED  Communication failed
+ * @retval #WIFI_DIRECT_ERROR_NOT_PERMITTED  Operation not permitted
+ * @retval #WIFI_DIRECT_ERROR_NOT_INITIALIZED  Not initialized
+ * @retval #WIFI_DIRECT_ERROR_RESOURCE_BUSY  Device or resource busy
+ * @pre Wi-Fi Direct service must be initialized by wifi_direct_initialize().
+ * @see wifi_direct_initialize()

  */
  */

+int wifi_direct_get_primary_device_type(wifi_direct_primary_device_type_e* type);
+

 /**
 /**

- * \brief This API shall get ssid of local device. \n
- * @param ssid              Pointer to store ssid. Application must free this memory.
- *
- * \par Sync (or) Async:
- * This is a Synchronous API.
- *
- * \warning
- *  None
- *
- *
- * \return Return Type (int) \n
- * - WIFI_DIRECT_ERROR_NONE on success \n
- * - WIFI_DIRECT_ERROR_OPERATION_FAILED for "Unkown error" \n
- * - WIFI_DIRECT_ERROR_OUT_OF_MEMORY for "Out of memory" \n
- * - WIFI_DIRECT_ERROR_COMMUNICATION_FAILED for "I/O error" \n
- * - WIFI_DIRECT_ERROR_NOT_PERMITTED for "Operation not permitted" \n
- * - WIFI_DIRECT_ERROR_INVALID_PARAMETER for "Invalid function parameter" \n
- * - WIFI_DIRECT_ERROR_RESOURCE_BUSY for "Device or resource busy" \n
- * - WIFI_DIRECT_ERROR_STRANGE_CLIENT for "Invalid Client" \n
- *
- *
- * \par Prospective Clients:
- * External Apps.
- *
- * \code
- *
- * #include <wifi-direct.h>
- *
- * void foo()
- * {
- * int  result;
- * char* ssid = NULL;
- *
- * result = wifi_direct_get_ssid(&ssid);
- *
- * if(result == WIFI_DIRECT_ERROR_NONE)......... // getting ssid is successful
- *
- * free(ssid); // Application should free the memory.
- *
- *
- *\endcode
- *
- *\remarks None.
- *
- ******************************************************************************/
-int wifi_direct_get_ssid(char** ssid);
+ * @brief Gets the secondary device type of local device.
+ * @param[out] type  The secondary device type
+ * @return 0 on success, otherwise a negative error value.
+ * @retval #WIFI_DIRECT_ERROR_NONE  Successful
+ * @retval #WIFI_DIRECT_ERROR_INVALID_PARAMETER  Invalid parameter
+ * @retval #WIFI_DIRECT_ERROR_OPERATION_FAILED  Operation failed
+ * @retval #WIFI_DIRECT_ERROR_COMMUNICATION_FAILED  Communication failed
+ * @retval #WIFI_DIRECT_ERROR_NOT_PERMITTED  Operation not permitted
+ * @retval #WIFI_DIRECT_ERROR_NOT_INITIALIZED  Not initialized
+ * @retval #WIFI_DIRECT_ERROR_RESOURCE_BUSY  Device or resource busy
+ * @pre Wi-Fi Direct service must be initialized by wifi_direct_initialize().
+ * @see wifi_direct_initialize()
+ */
+int wifi_direct_get_secondary_device_type(wifi_direct_secondary_device_type_e* type);

 
 

+/**
+ * @brief Called when you get the supported WPS(Wi-Fi Protected Setup) type repeatedly.
+ * @param[in] type  The type of WPS
+ * @param[in] user_data  The user data passed from the request function
+ * @return  @c true to continue with the next iteration of the loop, \n @c false to break out of the loop
+ * @pre  wifi_direct_foreach_supported_wps_types() will invoke this callback.
+ * @see  wifi_direct_foreach_supported_wps_types()
+ */
+typedef bool(*wifi_direct_supported_wps_type_cb)(wifi_direct_wps_type_e type, void* user_data);

 
 

-/*****************************************************************************************/
-/* wifi_direct_get_ip_address API function prototype
- * int wifi_direct_get_ip_address(char** ip_address)
+/**
+ * @brief Gets the supported WPS(Wi-Fi Protected Setup) types.
+ * @param[in] callback  The callback function to invoke
+ * @param[in] user_data  The user data to be passed to the callback function
+ * @retval #WIFI_DIRECT_ERROR_NONE  Successful
+ * @retval #WIFI_DIRECT_ERROR_INVALID_PARAMETER  Invalid parameter
+ * @retval #WIFI_DIRECT_ERROR_OPERATION_FAILED  Operation failed
+ * @retval #WIFI_DIRECT_ERROR_COMMUNICATION_FAILED  Communication failed
+ * @retval #WIFI_DIRECT_ERROR_NOT_PERMITTED  Operation not permitted
+ * @retval #WIFI_DIRECT_ERROR_NOT_INITIALIZED  Not initialized
+ * @retval #WIFI_DIRECT_ERROR_RESOURCE_BUSY  Device or resource busy
+ * @pre Wi-Fi Direct service must be initialized by wifi_direct_initialize().
+ * @see wifi_direct_initialize()
+ * @see wifi_direct_supported_wps_type_cb()

  */
  */

+int wifi_direct_foreach_supported_wps_types(wifi_direct_supported_wps_type_cb callback, void* user_data);
+

 /**
 /**

- * \brief This API shall get IP address of local device interface. \n
- * @param ip_addr              Pointer to store ip address. Application must free this memory.
- *
- * \par Sync (or) Async:
- * This is a Synchronous API.
- *
- * \warning
- *  None
- *
- *
- * \return Return Type (int) \n
- * - WIFI_DIRECT_ERROR_NONE on success \n
- * - WIFI_DIRECT_ERROR_OPERATION_FAILED for "Unkown error" \n
- * - WIFI_DIRECT_ERROR_OUT_OF_MEMORY for "Out of memory" \n
- * - WIFI_DIRECT_ERROR_COMMUNICATION_FAILED for "I/O error" \n
- * - WIFI_DIRECT_ERROR_NOT_PERMITTED for "Operation not permitted" \n
- * - WIFI_DIRECT_ERROR_INVALID_PARAMETER for "Invalid function parameter" \n
- * - WIFI_DIRECT_ERROR_RESOURCE_BUSY for "Device or resource busy" \n
- * - WIFI_DIRECT_ERROR_STRANGE_CLIENT for "Invalid Client" \n
- *
- *
- * \par Prospective Clients:
- * External Apps.
- *
- * \code
- *
- * #include <wifi-direct.h>
- *
- * void foo()
- * {
- * int  result;
- * char* ip = NULL;
- *
- * result = wifi_direct_get_ip_address(&ip);
- *
- * if(result == WIFI_DIRECT_ERROR_NONE)......... // getting IP is successful
- *
- * free(ip); // Application should free the memory.
- *
- *\endcode
- *
- *\remarks None.
- *
- ******************************************************************************/
-int wifi_direct_get_ip_address(char** ip_address);
+ * @brief Sets the WPS(Wi-Fi Protected Setup) type.
+ * @param[in] type  The type of WPS
+ * @retval #WIFI_DIRECT_ERROR_NONE  Successful
+ * @retval #WIFI_DIRECT_ERROR_INVALID_PARAMETER  Invalid parameter
+ * @retval #WIFI_DIRECT_ERROR_OPERATION_FAILED  Operation failed
+ * @retval #WIFI_DIRECT_ERROR_COMMUNICATION_FAILED  Communication failed
+ * @retval #WIFI_DIRECT_ERROR_NOT_PERMITTED  Operation not permitted
+ * @retval #WIFI_DIRECT_ERROR_NOT_INITIALIZED  Not initialized
+ * @retval #WIFI_DIRECT_ERROR_RESOURCE_BUSY  Device or resource busy
+ * @pre Wi-Fi Direct service must be initialized by wifi_direct_initialize().
+ * @see wifi_direct_initialize()
+ * @see wifi_direct_foreach_supported_wps_types()
+ */
+int wifi_direct_set_wps_type(wifi_direct_wps_type_e type);

 
 

+/**
+ * @brief Gets the WPS(Wi-Fi Protected Setup) type.
+ * @param[out] type  The type of WPS
+ * @retval #WIFI_DIRECT_ERROR_NONE  Successful
+ * @retval #WIFI_DIRECT_ERROR_INVALID_PARAMETER  Invalid parameter
+ * @retval #WIFI_DIRECT_ERROR_OPERATION_FAILED  Operation failed
+ * @retval #WIFI_DIRECT_ERROR_COMMUNICATION_FAILED  Communication failed
+ * @retval #WIFI_DIRECT_ERROR_NOT_PERMITTED  Operation not permitted
+ * @retval #WIFI_DIRECT_ERROR_NOT_INITIALIZED  Not initialized
+ * @retval #WIFI_DIRECT_ERROR_RESOURCE_BUSY  Device or resource busy
+ * @pre Wi-Fi Direct service must be initialized by wifi_direct_initialize().
+ * @see wifi_direct_initialize()
+ * @see wifi_direct_foreach_supported_wps_types()
+ */
+int wifi_direct_get_wps_type(wifi_direct_wps_type_e* type);

 
 

-/*****************************************************************************************/
-/* wifi_direct_get_mac_addr API function prototype
- * int wifi_direct_get_mac_address(char **mac_address)
+/**
+ * @brief Sets the intent of a group owner.
+ * @remarks The range of intent is 0 ~ 15. The higher the @a intent is, the higher the probability to be group owner is.
+ * @param[in] intent  The intent of a group owner
+ * @retval #WIFI_DIRECT_ERROR_NONE  Successful
+ * @retval #WIFI_DIRECT_ERROR_INVALID_PARAMETER  Invalid parameter
+ * @retval #WIFI_DIRECT_ERROR_OPERATION_FAILED  Operation failed
+ * @retval #WIFI_DIRECT_ERROR_COMMUNICATION_FAILED  Communication failed
+ * @retval #WIFI_DIRECT_ERROR_NOT_PERMITTED  Operation not permitted
+ * @retval #WIFI_DIRECT_ERROR_NOT_INITIALIZED  Not initialized
+ * @retval #WIFI_DIRECT_ERROR_RESOURCE_BUSY  Device or resource busy
+ * @pre Wi-Fi Direct service must be initialized by wifi_direct_initialize().
+ * @see wifi_direct_initialize()
+ * @see wifi_direct_get_group_owner_intent()

  */
  */

+int wifi_direct_set_group_owner_intent(int intent);
+

 /**
 /**

- * \brief This API shall get device MAC address of local device.\n
- * @param mac_addr              Pointer to store MAC address. Application must free this memory.
- *
- * \par Sync (or) Async:
- * This is a Synchronous API.
- *
- * \warning
- *  None
- *
- *
- * \return Return Type (int) \n
- * - WIFI_DIRECT_ERROR_NONE on success \n
- * - WIFI_DIRECT_ERROR_OPERATION_FAILED for "Unkown error" \n
- * - WIFI_DIRECT_ERROR_OUT_OF_MEMORY for "Out of memory" \n
- * - WIFI_DIRECT_ERROR_COMMUNICATION_FAILED for "I/O error" \n
- * - WIFI_DIRECT_ERROR_NOT_PERMITTED for "Operation not permitted" \n
- * - WIFI_DIRECT_ERROR_INVALID_PARAMETER for "Invalid function parameter" \n
- * - WIFI_DIRECT_ERROR_RESOURCE_BUSY for "Device or resource busy" \n
- * - WIFI_DIRECT_ERROR_STRANGE_CLIENT for "Invalid Client" \n
- *
- *
- * \par Prospective Clients:
- * External Apps.
- *
- * \code
- *
- * #include <wifi-direct.h>
- *
- * void foo()
- * {
- * int  result;
- * char* mac_addr =NULL;
- *
- * result = wifi_direct_get_mac_addr(&mac_addr);
- *
- * if(result == WIFI_DIRECT_ERROR_NONE)......... // getting device MAC is successful
- *
- *\endcode
- *
- *\remarks None.
- *
- ******************************************************************************/
-int wifi_direct_get_mac_address(char** mac_address);
+ * @brief Gets the intent of a group owner.
+ * @param[out] intent  The intent of a group owner
+ * @retval #WIFI_DIRECT_ERROR_NONE  Successful
+ * @retval #WIFI_DIRECT_ERROR_INVALID_PARAMETER  Invalid parameter
+ * @retval #WIFI_DIRECT_ERROR_OPERATION_FAILED  Operation failed
+ * @retval #WIFI_DIRECT_ERROR_COMMUNICATION_FAILED  Communication failed
+ * @retval #WIFI_DIRECT_ERROR_NOT_PERMITTED  Operation not permitted
+ * @retval #WIFI_DIRECT_ERROR_NOT_INITIALIZED  Not initialized
+ * @retval #WIFI_DIRECT_ERROR_RESOURCE_BUSY  Device or resource busy
+ * @pre Wi-Fi Direct service must be initialized by wifi_direct_initialize().
+ * @see wifi_direct_initialize()
+ * @see wifi_direct_set_group_owner_intent()
+ */
+int wifi_direct_get_group_owner_intent(int* intent);

 
 

+/**
+ * @brief Sets the max number of clients.
+ * @param[in] max  The max number of clients
+ * @retval #WIFI_DIRECT_ERROR_NONE  Successful
+ * @retval #WIFI_DIRECT_ERROR_INVALID_PARAMETER  Invalid parameter
+ * @retval #WIFI_DIRECT_ERROR_OPERATION_FAILED  Operation failed
+ * @retval #WIFI_DIRECT_ERROR_COMMUNICATION_FAILED  Communication failed
+ * @retval #WIFI_DIRECT_ERROR_NOT_PERMITTED  Operation not permitted
+ * @retval #WIFI_DIRECT_ERROR_NOT_INITIALIZED  Not initialized
+ * @retval #WIFI_DIRECT_ERROR_RESOURCE_BUSY  Device or resource busy
+ * @pre Wi-Fi Direct service must be initialized by wifi_direct_initialize().
+ * @see wifi_direct_initialize()
+ * @see wifi_direct_get_max_clients()
+ */
+int wifi_direct_set_max_clients(int max);

 
 

-/*****************************************************************************************/
-/* wifi_direct_get_state API function prototype
- * int wifi_direct_get_state(wifi_direct_state_e * status);
+/**
+ * @brief Gets the max number of clients.
+ * @param[in] max  The max number of clients
+ * @retval #WIFI_DIRECT_ERROR_NONE  Successful
+ * @retval #WIFI_DIRECT_ERROR_INVALID_PARAMETER  Invalid parameter
+ * @retval #WIFI_DIRECT_ERROR_OPERATION_FAILED  Operation failed
+ * @retval #WIFI_DIRECT_ERROR_COMMUNICATION_FAILED  Communication failed
+ * @retval #WIFI_DIRECT_ERROR_NOT_PERMITTED  Operation not permitted
+ * @retval #WIFI_DIRECT_ERROR_NOT_INITIALIZED  Not initialized
+ * @retval #WIFI_DIRECT_ERROR_RESOURCE_BUSY  Device or resource busy
+ * @pre Wi-Fi Direct service must be initialized by wifi_direct_initialize().
+ * @see wifi_direct_initialize()
+ * @see wifi_direct_set_max_clients()

  */
  */

+int wifi_direct_get_max_clients(int* max);
+

 /**
 /**

- * \brief This API shall get current Wi-Fi direct link status. \n
- * @param status Memory to store link status information. Application must allocate memory.
- *
- * \see wifi_direct_state_e
- *
- * \par Sync (or) Async:
- * This is a Synchronous API.
- *
- * \warning
- *  None
- *
- *
- * \return Return Type (int) \n
- * - WIFI_DIRECT_ERROR_NONE on success \n
- * - WIFI_DIRECT_ERROR_OPERATION_FAILED for "Unkown error" \n
- * - WIFI_DIRECT_ERROR_OUT_OF_MEMORY for "Out of memory" \n
- * - WIFI_DIRECT_ERROR_COMMUNICATION_FAILED for "I/O error" \n
- * - WIFI_DIRECT_ERROR_NOT_PERMITTED for "Operation not permitted" \n
- * - WIFI_DIRECT_ERROR_INVALID_PARAMETER for "Invalid function parameter" \n
- * - WIFI_DIRECT_ERROR_RESOURCE_BUSY for "Device or resource busy" \n
- * - WIFI_DIRECT_ERROR_STRANGE_CLIENT for "Invalid Client" \n
- *
- *
- * \par Prospective Clients:
- * External Apps.
- *
- * \code
- *
- * #include <wifi-direct.h>
- *
- * void foo()
- * {
- * int result;
- * wifi_direct_state_e status;
- *
- * result = wifi_direct_get_state(&status);
- *
- * if(result == WIFI_DIRECT_ERROR_NONE)......... // getting link status is successful
- *
- *\endcode
- *
- *\remarks None.
- *
- ******************************************************************************/
-int wifi_direct_get_state(wifi_direct_state_e* state);
+ * @brief Gets the channel of own group. - DEPRECATED
+ * @remarks This API will be removed.
+ * @param[out] channel  The channel of own group
+ * @return 0 on success, otherwise a negative error value.
+ * @retval #WIFI_DIRECT_ERROR_NONE  Successful
+ * @retval #WIFI_DIRECT_ERROR_INVALID_PARAMETER  Invalid parameter
+ * @retval #WIFI_DIRECT_ERROR_OPERATION_FAILED  Operation failed
+ * @retval #WIFI_DIRECT_ERROR_COMMUNICATION_FAILED  Communication failed
+ * @retval #WIFI_DIRECT_ERROR_NOT_PERMITTED  Operation not permitted
+ * @retval #WIFI_DIRECT_ERROR_NOT_INITIALIZED  Not initialized
+ * @retval #WIFI_DIRECT_ERROR_RESOURCE_BUSY  Device or resource busy
+ * @pre Wi-Fi Direct service must be initialized by wifi_direct_initialize().
+ * @see wifi_direct_initialize()
+ */
+int wifi_direct_get_own_group_channel(int* channel);

 
 

+/**
+ * @brief Gets the operating channel.
+ * @param[out] channel  The operating channel
+ * @return 0 on success, otherwise a negative error value.
+ * @retval #WIFI_DIRECT_ERROR_NONE  Successful
+ * @retval #WIFI_DIRECT_ERROR_INVALID_PARAMETER  Invalid parameter
+ * @retval #WIFI_DIRECT_ERROR_OPERATION_FAILED  Operation failed
+ * @retval #WIFI_DIRECT_ERROR_COMMUNICATION_FAILED  Communication failed
+ * @retval #WIFI_DIRECT_ERROR_NOT_PERMITTED  Operation not permitted
+ * @retval #WIFI_DIRECT_ERROR_NOT_INITIALIZED  Not initialized
+ * @retval #WIFI_DIRECT_ERROR_RESOURCE_BUSY  Device or resource busy
+ * @pre Wi-Fi Direct service must be initialized by wifi_direct_initialize().
+ * @see wifi_direct_initialize()
+ */
+int wifi_direct_get_operating_channel(int* channel);

 
 /**
  * @}
 
 /**
  * @}

diff --git a/packaging/capi-network-wifi-direct.spec b/packaging/capi-network-wifi-direct.spec
index 8d34485ea913af5246ab549348fa7e6bbdb922b1..102ca55729f1c0a37009d173636fcaaa8b75c97d 100755 (executable)
--- a/packaging/capi-network-wifi-direct.spec
+++ b/packaging/capi-network-wifi-direct.spec
@@ -1,14 +1,15 @@
 Name:       capi-network-wifi-direct
 Summary:    Network WiFi-Direct library in Tizen CAPI
 Name:       capi-network-wifi-direct
 Summary:    Network WiFi-Direct library in Tizen CAPI

-Version: 0.0.1
-Release:    3
+Version: 0.0.4
+Release:    5

 Group:      TO_BE_FILLED
 License:    TO_BE_FILLED
 Source0:    %{name}-%{version}.tar.gz
 Group:      TO_BE_FILLED
 License:    TO_BE_FILLED
 Source0:    %{name}-%{version}.tar.gz

+Requires(post): /sbin/ldconfig
+Requires(postun): /sbin/ldconfig

 BuildRequires:  pkgconfig(dbus-glib-1)
 BuildRequires:  pkgconfig(dlog)
 BuildRequires:  pkgconfig(vconf)
 BuildRequires:  pkgconfig(dbus-glib-1)
 BuildRequires:  pkgconfig(dlog)
 BuildRequires:  pkgconfig(vconf)

-BuildRequires:  pkgconfig(wifi-direct)

 BuildRequires:  pkgconfig(capi-base-common)
 BuildRequires:  cmake
 
 BuildRequires:  pkgconfig(capi-base-common)
 BuildRequires:  cmake
 


@@ -19,9 +20,8 @@ BuildRequires:  cmake
 %package devel 
 Summary:    WiFi-Direct library (Shared Library) (Developement)
 Group:      TO_BE_FILLED 
 %package devel 
 Summary:    WiFi-Direct library (Shared Library) (Developement)
 Group:      TO_BE_FILLED 

-Requires:  pkgconfig(capi-base-common)
-Requires:  pkgconfig(wifi-direct)
-
+Requires: capi-base-common-devel
+BuildRequires:  pkgconfig(wifi-direct)

 %description devel
 WiFi-Direct library (Shared Library) (Developement)
 
 %description devel
 WiFi-Direct library (Shared Library) (Developement)
 


@@ -40,7 +40,10 @@ rm -rf %{buildroot}
 
 %postun
 
 
 %postun
 

+%files
+

 %files devel 
 %defattr(-,root,root,-)
 %{_libdir}/pkgconfig/*.pc
 %{_includedir}/*/*.h
 %files devel 
 %defattr(-,root,root,-)
 %{_libdir}/pkgconfig/*.pc
 %{_includedir}/*/*.h

+