In non DM I2C read operations the address length passed in during a read
operation will be used automatically. However, in DM I2C the address length
is set to a default value of one which causes problems when trying to
perform a read with a differing alen. Therefore, before the first read in a
series of read operations set the alen to the correct value.
Signed-off-by: Franklin S Cooper Jr <fcooper@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Heiko Schocher <hs@denx.de>
static int __maybe_unused ti_i2c_eeprom_read(int dev_addr, int offset,
uchar *ep, int epsize)
{
static int __maybe_unused ti_i2c_eeprom_read(int dev_addr, int offset,
uchar *ep, int epsize)
{
- return i2c_read(dev_addr, offset, 2, ep, epsize);
+ int bus_num, rc, alen;
+
+ bus_num = i2c_get_bus_num();
+
+ alen = 2;
+
+ rc = ti_i2c_set_alen(bus_num, dev_addr, alen);
+ if (rc)
+ return rc;
+
+ return i2c_read(dev_addr, offset, alen, ep, epsize);
* Read the header first then only read the other contents.
*/
byte = 2;
* Read the header first then only read the other contents.
*/
byte = 2;
+
+ rc = ti_i2c_set_alen(bus_addr, dev_addr, byte);
+ if (rc)
+ return rc;
+
rc = i2c_read(dev_addr, 0x0, byte, (uint8_t *)&hdr_read, 4);
if (rc)
return rc;
rc = i2c_read(dev_addr, 0x0, byte, (uint8_t *)&hdr_read, 4);
if (rc)
return rc;
* 1 byte address (some legacy boards need this..)
*/
byte = 1;
* 1 byte address (some legacy boards need this..)
*/
byte = 1;
+ if (rc) {
+ rc = ti_i2c_set_alen(bus_addr, dev_addr, byte);
+ if (rc)
+ return rc;
+
rc = i2c_read(dev_addr, 0x0, byte, (uint8_t *)&hdr_read,
4);
rc = i2c_read(dev_addr, 0x0, byte, (uint8_t *)&hdr_read,
4);