Change-Id: Ibbac1607fe34b400cf97d0be606c889c7608d5da
Signed-off-by: Jaehyun Kim <jeik01.kim@samsung.com>
* @brief Initializes Wi-Fi Direct service.
* @since_tizen 2.3
* @privlevel public
* @brief Initializes Wi-Fi Direct service.
* @since_tizen 2.3
* @privlevel public
- * @privilege http://tizen.org/privilege/wifidirect
+ * @privilege %http://tizen.org/privilege/wifidirect
* @return @c 0 on success,
* otherwise a negative error value
* @retval #WIFI_DIRECT_ERROR_NONE Successful
* @return @c 0 on success,
* otherwise a negative error value
* @retval #WIFI_DIRECT_ERROR_NONE Successful
* // Handle WPS PIN Display case here
* }
*
* // Handle WPS PIN Display case here
* }
*
- * if (wps_mode == WIFI_DIRECT_WPS_PIN_KEYPAD) {
+ * if (wps_mode == WIFI_DIRECT_WPS_TYPE_PIN_KEYPAD) {
* printf("Connection type WPS PIN KEYPAD\n");
* // Handle WPS PIN Keypad case here
* }
* printf("Connection type WPS PIN KEYPAD\n");
* // Handle WPS PIN Keypad case here
* }
* printf("peer device disconnection response MAC %s\n", mac_address);
* break;
*
* printf("peer device disconnection response MAC %s\n", mac_address);
* break;
*
- * case WIFI_DIRECT_CONNECTION_DISASSOCIATION_IND:
+ * case WIFI_DIRECT_DISASSOCIATION_IND:
* if (error_code == WIFI_DIRECT_ERROR_NONE)
* printf("peer device disassociation MAC %s\n", mac_address);
* break;
* if (error_code == WIFI_DIRECT_ERROR_NONE)
* printf("peer device disassociation MAC %s\n", mac_address);
* break;
* @brief Activates the Wi-Fi Direct service, asynchronously.
* @since_tizen 2.3
* @privlevel public
* @brief Activates the Wi-Fi Direct service, asynchronously.
* @since_tizen 2.3
* @privlevel public
- * @privilege http://tizen.org/privilege/wifidirect
+ * @privilege %http://tizen.org/privilege/wifidirect
* @return @c 0 on success,
* otherwise a negative error value
* @retval #WIFI_DIRECT_ERROR_NONE Successful
* @return @c 0 on success,
* otherwise a negative error value
* @retval #WIFI_DIRECT_ERROR_NONE Successful
* @brief Deactivates the Wi-Fi Direct service, asynchronously.
* @since_tizen 2.3
* @privlevel public
* @brief Deactivates the Wi-Fi Direct service, asynchronously.
* @since_tizen 2.3
* @privlevel public
- * @privilege http://tizen.org/privilege/wifidirect
+ * @privilege %http://tizen.org/privilege/wifidirect
* @return @c 0 on success,
* otherwise a negative error value
* @retval #WIFI_DIRECT_ERROR_NONE Successful
* @return @c 0 on success,
* otherwise a negative error value
* @retval #WIFI_DIRECT_ERROR_NONE Successful
* cycling between Scan and Listen.
* @since_tizen 2.3
* @privlevel public
* cycling between Scan and Listen.
* @since_tizen 2.3
* @privlevel public
- * @privilege http://tizen.org/privilege/wifidirect
+ * @privilege %http://tizen.org/privilege/wifidirect
* @remarks The function can be called if the Wi-Fi Direct state is one of:\n
* #WIFI_DIRECT_STATE_ACTIVATED\n
* #WIFI_DIRECT_STATE_DISCOVERING\n
* @remarks The function can be called if the Wi-Fi Direct state is one of:\n
* #WIFI_DIRECT_STATE_ACTIVATED\n
* #WIFI_DIRECT_STATE_DISCOVERING\n
* then will search only the devices on the channel 11.
* @since_tizen 2.3
* @privlevel public
* then will search only the devices on the channel 11.
* @since_tizen 2.3
* @privlevel public
- * @privilege http://tizen.org/privilege/wifidirect
+ * @privilege %http://tizen.org/privilege/wifidirect
* @remarks The function can be called if the Wi-Fi Direct state is one of:\n
* #WIFI_DIRECT_STATE_ACTIVATED\n
* #WIFI_DIRECT_STATE_DISCOVERING\n
* @remarks The function can be called if the Wi-Fi Direct state is one of:\n
* #WIFI_DIRECT_STATE_ACTIVATED\n
* #WIFI_DIRECT_STATE_DISCOVERING\n
* @brief Starts discovery to find all P2P capable devices with specified frequency, asynchronously.
* @since_tizen 4.0
* @privlevel public
* @brief Starts discovery to find all P2P capable devices with specified frequency, asynchronously.
* @since_tizen 4.0
* @privlevel public
- * @privilege http://tizen.org/privilege/wifidirect
+ * @privilege %http://tizen.org/privilege/wifidirect
* @remarks The function can be called if the Wi-Fi Direct state is one of:\n
* #WIFI_DIRECT_STATE_ACTIVATED\n
* #WIFI_DIRECT_STATE_DISCOVERING\n
* @remarks The function can be called if the Wi-Fi Direct state is one of:\n
* #WIFI_DIRECT_STATE_ACTIVATED\n
* #WIFI_DIRECT_STATE_DISCOVERING\n
* wifi_direct_start_discovery() functions.
* @since_tizen 2.3
* @privlevel public
* wifi_direct_start_discovery() functions.
* @since_tizen 2.3
* @privlevel public
- * @privilege http://tizen.org/privilege/wifidirect
+ * @privilege %http://tizen.org/privilege/wifidirect
* @return @c 0 on success,
* otherwise a negative error value
* @retval #WIFI_DIRECT_ERROR_NONE Successful
* @return @c 0 on success,
* otherwise a negative error value
* @retval #WIFI_DIRECT_ERROR_NONE Successful
* @brief Gets the information of discovered peers.
* @since_tizen 2.3
* @privlevel public
* @brief Gets the information of discovered peers.
* @since_tizen 2.3
* @privlevel public
- * @privilege http://tizen.org/privilege/wifidirect
+ * @privilege %http://tizen.org/privilege/wifidirect
* @param[in] callback The callback function to invoke
* @param[in] user_data The user data to be passed to the callback function
* @return @c 0 on success,
* @param[in] callback The callback function to invoke
* @param[in] user_data The user data to be passed to the callback function
* @return @c 0 on success,
* and the availability of persistent data.
* @since_tizen 2.3
* @privlevel public
* and the availability of persistent data.
* @since_tizen 2.3
* @privlevel public
- * @privilege http://tizen.org/privilege/wifidirect
+ * @privilege %http://tizen.org/privilege/wifidirect
* @param[in] mac_address The MAC address of remote device
* @return @c 0 on success,
* otherwise a negative error value
* @param[in] mac_address The MAC address of remote device
* @return @c 0 on success,
* otherwise a negative error value
* printf("Connection in progress\n");
* break;
*
* printf("Connection in progress\n");
* break;
*
- * case WIFI_DIRECT_CONNECTON_RSP:
+ * case WIFI_DIRECT_CONNECTION_RSP:
* printf("Connected\n");
* break;
*
* printf("Connected\n");
* break;
*
* @brief Cancels the connection now in progress.
* @since_tizen 2.3
* @privlevel public
* @brief Cancels the connection now in progress.
* @since_tizen 2.3
* @privlevel public
- * @privilege http://tizen.org/privilege/wifidirect
+ * @privilege %http://tizen.org/privilege/wifidirect
* @param[in] mac_address The MAC address of rejected device
* @return @c 0 on success,
* otherwise a negative error value
* @param[in] mac_address The MAC address of rejected device
* @return @c 0 on success,
* otherwise a negative error value
* @brief Disconnects all connected links to peers, asynchronously.
* @since_tizen 2.3
* @privlevel public
* @brief Disconnects all connected links to peers, asynchronously.
* @since_tizen 2.3
* @privlevel public
- * @privilege http://tizen.org/privilege/wifidirect
+ * @privilege %http://tizen.org/privilege/wifidirect
* @return @c 0 on success,
* otherwise a negative error value
* @retval #WIFI_DIRECT_ERROR_NONE Successful
* @return @c 0 on success,
* otherwise a negative error value
* @retval #WIFI_DIRECT_ERROR_NONE Successful
* @brief Disconnects the specified peer, asynchronously.
* @since_tizen 2.3
* @privlevel public
* @brief Disconnects the specified peer, asynchronously.
* @since_tizen 2.3
* @privlevel public
- * @privilege http://tizen.org/privilege/wifidirect
+ * @privilege %http://tizen.org/privilege/wifidirect
* @param[in] mac_address The MAC address of remote device
* @return @c 0 on success,
* otherwise a negative error value
* @param[in] mac_address The MAC address of remote device
* @return @c 0 on success,
* otherwise a negative error value
* @brief Gets the information of connected peers.
* @since_tizen 2.3
* @privlevel public
* @brief Gets the information of connected peers.
* @since_tizen 2.3
* @privlevel public
- * @privilege http://tizen.org/privilege/wifidirect
+ * @privilege %http://tizen.org/privilege/wifidirect
* @param[in] callback The callback function to invoke
* @param[in] user_data The user data to be passed to the callback function
* @return @c 0 on success,
* @param[in] callback The callback function to invoke
* @param[in] user_data The user data to be passed to the callback function
* @return @c 0 on success,
* In addition, a soft AP will be created, the WPS registrar and the DHCP server will be started.
* @since_tizen 2.3
* @privlevel public
* In addition, a soft AP will be created, the WPS registrar and the DHCP server will be started.
* @since_tizen 2.3
* @privlevel public
- * @privilege http://tizen.org/privilege/wifidirect
+ * @privilege %http://tizen.org/privilege/wifidirect
* @return @c 0 on success,
* otherwise a negative error value
* @retval #WIFI_DIRECT_ERROR_NONE Successful
* @return @c 0 on success,
* otherwise a negative error value
* @retval #WIFI_DIRECT_ERROR_NONE Successful
* In addition, a soft AP will be created, the WPS registrar and the DHCP server will be started.
* @since_tizen 5.0
* @privlevel public
* In addition, a soft AP will be created, the WPS registrar and the DHCP server will be started.
* @since_tizen 5.0
* @privlevel public
- * @privilege http://tizen.org/privilege/wifidirect
+ * @privilege %http://tizen.org/privilege/wifidirect
* @param[in] ssid Referred to as a network name, it is a name that identifies a wireless network
* @return 0 on success, otherwise a negative error value
* @retval #WIFI_DIRECT_ERROR_NONE Successful
* @param[in] ssid Referred to as a network name, it is a name that identifies a wireless network
* @return 0 on success, otherwise a negative error value
* @retval #WIFI_DIRECT_ERROR_NONE Successful
* If creating a Group is in progress, this function cancels that creating.
* @since_tizen 2.3
* @privlevel public
* If creating a Group is in progress, this function cancels that creating.
* @since_tizen 2.3
* @privlevel public
- * @privilege http://tizen.org/privilege/wifidirect
+ * @privilege %http://tizen.org/privilege/wifidirect
* @return @c 0 on success,
* otherwise a negative error value
* @retval #WIFI_DIRECT_ERROR_NONE Successful
* @return @c 0 on success,
* otherwise a negative error value
* @retval #WIFI_DIRECT_ERROR_NONE Successful
* @brief Checks whether this device is the group owner or not.
* @since_tizen 2.3
* @privlevel public
* @brief Checks whether this device is the group owner or not.
* @since_tizen 2.3
* @privlevel public
- * @privilege http://tizen.org/privilege/wifidirect
+ * @privilege %http://tizen.org/privilege/wifidirect
* @param[out] is_group_owner Indicates whether this device is the group owner or not
* @return @c 0 on success,
* otherwise a negative error value
* @param[out] is_group_owner Indicates whether this device is the group owner or not
* @return @c 0 on success,
* otherwise a negative error value
* then the current group is the autonomous group.
* @since_tizen 2.3
* @privlevel public
* then the current group is the autonomous group.
* @since_tizen 2.3
* @privlevel public
- * @privilege http://tizen.org/privilege/wifidirect
+ * @privilege %http://tizen.org/privilege/wifidirect
* @param[out] is_autonomous_group Indicates whether the current group is the autonomous group or not
* @return @c 0 on success,
* otherwise a negative error value
* @param[out] is_autonomous_group Indicates whether the current group is the autonomous group or not
* @return @c 0 on success,
* otherwise a negative error value
* @details This device name is shown to other devices during device discovery.
* @since_tizen 2.3
* @privlevel public
* @details This device name is shown to other devices during device discovery.
* @since_tizen 2.3
* @privlevel public
- * @privilege http://tizen.org/privilege/wifidirect
+ * @privilege %http://tizen.org/privilege/wifidirect
* @remarks The name set is only valid during activated state.
* After Wi-Fi Direct is deactivated, this name will be same as the phone name.
* @param[in] device_name The name of a local device
* @remarks The name set is only valid during activated state.
* After Wi-Fi Direct is deactivated, this name will be same as the phone name.
* @param[in] device_name The name of a local device
* @brief Gets the name of a local device.
* @since_tizen 2.3
* @privlevel public
* @brief Gets the name of a local device.
* @since_tizen 2.3
* @privlevel public
- * @privilege http://tizen.org/privilege/wifidirect
+ * @privilege %http://tizen.org/privilege/wifidirect
* @remarks @a device_name must be released with free().
* @param[out] device_name The name of a local device
* @return @c 0 on success,
* @remarks @a device_name must be released with free().
* @param[out] device_name The name of a local device
* @return @c 0 on success,
* @brief Gets SSID (Service Set Identifier) of a local device.
* @since_tizen 2.3
* @privlevel public
* @brief Gets SSID (Service Set Identifier) of a local device.
* @since_tizen 2.3
* @privlevel public
- * @privilege http://tizen.org/privilege/wifidirect
+ * @privilege %http://tizen.org/privilege/wifidirect
* @remarks @a ssid must be released using free().
* @param[out] ssid The SSID
* @return @c 0 on success,
* @remarks @a ssid must be released using free().
* @param[out] ssid The SSID
* @return @c 0 on success,
* @brief Gets the name of network interface (for example: eth0, pdp0).
* @since_tizen 2.3
* @privlevel public
* @brief Gets the name of network interface (for example: eth0, pdp0).
* @since_tizen 2.3
* @privlevel public
- * @privilege http://tizen.org/privilege/wifidirect
+ * @privilege %http://tizen.org/privilege/wifidirect
* @remarks @a name must be released using free().
* @param[out] name The name of the network interface
* @return @c 0 on success,
* @remarks @a name must be released using free().
* @param[out] name The name of the network interface
* @return @c 0 on success,
* @brief Gets IP address of a local device.
* @since_tizen 2.3
* @privlevel public
* @brief Gets IP address of a local device.
* @since_tizen 2.3
* @privlevel public
- * @privilege http://tizen.org/privilege/wifidirect
+ * @privilege %http://tizen.org/privilege/wifidirect
* @remarks @a ip_address must be released using free().
* @param[out] ip_address The IP address
* @return @c 0 on success,
* @remarks @a ip_address must be released using free().
* @param[out] ip_address The IP address
* @return @c 0 on success,
* @brief Gets the Subnet Mask.
* @since_tizen 2.3
* @privlevel public
* @brief Gets the Subnet Mask.
* @since_tizen 2.3
* @privlevel public
- * @privilege http://tizen.org/privilege/wifidirect
+ * @privilege %http://tizen.org/privilege/wifidirect
* @remarks @a subnet_mask must be released using free().
* @param[out] subnet_mask The subnet mask
* @return @c 0 on success,
* @remarks @a subnet_mask must be released using free().
* @param[out] subnet_mask The subnet mask
* @return @c 0 on success,
*
* wifi_direct_get_ip_address(&ip); // get ip address
*
*
* wifi_direct_get_ip_address(&ip); // get ip address
*
- * ret = wifi_direct_get_subnetmask(&subnet); // get subnet mask
+ * ret = wifi_direct_get_subnet_mask(&subnet); // get subnet mask
*
* if (ret != WIFI_DIRECT_ERROR_NONE) {
* printf("Failed to get subnet mask\n");
*
* if (ret != WIFI_DIRECT_ERROR_NONE) {
* printf("Failed to get subnet mask\n");
* @brief Gets the Gateway address.
* @since_tizen 2.3
* @privlevel public
* @brief Gets the Gateway address.
* @since_tizen 2.3
* @privlevel public
- * @privilege http://tizen.org/privilege/wifidirect
+ * @privilege %http://tizen.org/privilege/wifidirect
* @remarks @a gateway_address must be released using free().
* @param[out] gateway_address The gateway address
* @return @c 0 on success,
* @remarks @a gateway_address must be released using free().
* @param[out] gateway_address The gateway address
* @return @c 0 on success,
* @brief Gets MAC address of a local device.
* @since_tizen 2.3
* @privlevel public
* @brief Gets MAC address of a local device.
* @since_tizen 2.3
* @privlevel public
- * @privilege http://tizen.org/privilege/wifidirect
+ * @privilege %http://tizen.org/privilege/wifidirect
* @remarks @a mac_address must be released using free().
* @param[out] mac_address The MAC address
* @return @c 0 on success,
* @remarks @a mac_address must be released using free().
* @param[out] mac_address The MAC address
* @return @c 0 on success,
* @details If you call wifi_direct_start_discovery(), then your device can be discoverable.
* @since_tizen 2.3
* @privlevel public
* @details If you call wifi_direct_start_discovery(), then your device can be discoverable.
* @since_tizen 2.3
* @privlevel public
- * @privilege http://tizen.org/privilege/wifidirect
+ * @privilege %http://tizen.org/privilege/wifidirect
* @param[out] discoverable The status of discoverable:
* (@c true = discoverable, @c false = non-discoverable)
* @return @c 0 on success,
* @param[out] discoverable The status of discoverable:
* (@c true = discoverable, @c false = non-discoverable)
* @return @c 0 on success,
* it does not support specific channel but the initial 802.11.
* @since_tizen 2.3
* @privlevel public
* it does not support specific channel but the initial 802.11.
* @since_tizen 2.3
* @privlevel public
- * @privilege http://tizen.org/privilege/wifidirect
+ * @privilege %http://tizen.org/privilege/wifidirect
* @param[out] listen_only The status of listen only:(@c true = listen only, @c false =
* cycling between Scan and Listen or not in discovery state)
* @return @c 0 on success,
* @param[out] listen_only The status of listen only:(@c true = listen only, @c false =
* cycling between Scan and Listen or not in discovery state)
* @return @c 0 on success,
* @brief Gets the primary device type of a local device.
* @since_tizen 2.3
* @privlevel public
* @brief Gets the primary device type of a local device.
* @since_tizen 2.3
* @privlevel public
- * @privilege http://tizen.org/privilege/wifidirect
+ * @privilege %http://tizen.org/privilege/wifidirect
* @param[out] type The primary device type
* @return @c 0 on success,
* otherwise a negative error value
* @param[out] type The primary device type
* @return @c 0 on success,
* otherwise a negative error value
* @brief Gets the secondary device type of a local device.
* @since_tizen 2.3
* @privlevel public
* @brief Gets the secondary device type of a local device.
* @since_tizen 2.3
* @privlevel public
- * @privilege http://tizen.org/privilege/wifidirect
+ * @privilege %http://tizen.org/privilege/wifidirect
* @param[out] type The secondary device type
* @return @c 0 on success,
* otherwise a negative error value
* @param[out] type The secondary device type
* @return @c 0 on success,
* otherwise a negative error value
* @brief Sets the WPS config PBC as preferred method for connection.
* @since_tizen 2.3
* @privlevel public
* @brief Sets the WPS config PBC as preferred method for connection.
* @since_tizen 2.3
* @privlevel public
- * @privilege http://tizen.org/privilege/wifidirect
+ * @privilege %http://tizen.org/privilege/wifidirect
* @return @c 0 on success,
* otherwise a negative error value
* @retval #WIFI_DIRECT_ERROR_NONE Successful
* @return @c 0 on success,
* otherwise a negative error value
* @retval #WIFI_DIRECT_ERROR_NONE Successful
* @brief Sets or updates the WPS PIN number user expects.
* @since_tizen 2.3
* @privlevel public
* @brief Sets or updates the WPS PIN number user expects.
* @since_tizen 2.3
* @privlevel public
- * @privilege http://tizen.org/privilege/wifidirect
+ * @privilege %http://tizen.org/privilege/wifidirect
* @param[in] pin New pin to set. Application must set the new pin number before
* @return @c 0 on success,
* otherwise a negative error value
* @param[in] pin New pin to set. Application must set the new pin number before
* @return @c 0 on success,
* otherwise a negative error value
* // Handle WPS PIN Display case here
* }
*
* // Handle WPS PIN Display case here
* }
*
- * if (wps_mode == WIFI_DIRECT_WPS_PIN_KEYPAD) {
+ * if (wps_mode == WIFI_DIRECT_WPS_TYPE_PIN_KEYPAD) {
* printf("Connection type WPS PIN KEYPAD\n");
*
* // Set 8 digit WPS PIN here
* printf("Connection type WPS PIN KEYPAD\n");
*
* // Set 8 digit WPS PIN here
* printf("peer device disconnection response MAC %s\n", mac_address);
* break;
*
* printf("peer device disconnection response MAC %s\n", mac_address);
* break;
*
- * case WIFI_DIRECT_CONNECTION_DISASSOCIATION_IND:
+ * case WIFI_DIRECT_DISASSOCIATION_IND:
* if (error_code == WIFI_DIRECT_ERROR_NONE)
* printf("peer device disassociation MAC %s\n", mac_address);
* break;
* if (error_code == WIFI_DIRECT_ERROR_NONE)
* printf("peer device disassociation MAC %s\n", mac_address);
* break;
* @brief Gets the WPS PIN number.
* @since_tizen 2.3
* @privlevel public
* @brief Gets the WPS PIN number.
* @since_tizen 2.3
* @privlevel public
- * @privilege http://tizen.org/privilege/wifidirect
+ * @privilege %http://tizen.org/privilege/wifidirect
* @remarks @a pin must be released with free().
* @param[out] pin Pointer to store pin number. Application must free this memory
* @return @c 0 on success,
* @remarks @a pin must be released with free().
* @param[out] pin Pointer to store pin number. Application must free this memory
* @return @c 0 on success,
- * if (wps_mode == WIFI_DIRECT_WPS_PIN_KEYPAD) {
+ * if (wps_mode == WIFI_DIRECT_WPS_TYPE_PIN_KEYPAD) {
* printf("Connection type WPS PIN KEYPAD\n");
* // Handle WPS PIN Keypad case here
* }
* printf("Connection type WPS PIN KEYPAD\n");
* // Handle WPS PIN Keypad case here
* }
* printf("peer device disconnection response MAC %s\n", mac_address);
* break;
*
* printf("peer device disconnection response MAC %s\n", mac_address);
* break;
*
- * case WIFI_DIRECT_CONNECTION_DISASSOCIATION_IND:
+ * case WIFI_DIRECT_DISASSOCIATION_IND:
* if (error_code == WIFI_DIRECT_ERROR_NONE)
* printf("peer device disassociation MAC %s\n", mac_address);
* break;
* if (error_code == WIFI_DIRECT_ERROR_NONE)
* printf("peer device disassociation MAC %s\n", mac_address);
* break;
* @brief Gets all the supported WPS (Wi-Fi Protected Setup) types at local device.
* @since_tizen 2.3
* @privlevel public
* @brief Gets all the supported WPS (Wi-Fi Protected Setup) types at local device.
* @since_tizen 2.3
* @privlevel public
- * @privilege http://tizen.org/privilege/wifidirect
+ * @privilege %http://tizen.org/privilege/wifidirect
* @param[out] wps_mode Supported WPS mode for local device
* @return @c 0 on success,
* otherwise a negative error value
* @param[out] wps_mode Supported WPS mode for local device
* @return @c 0 on success,
* otherwise a negative error value
* @brief Gets the supported WPS (Wi-Fi Protected Setup) types.
* @since_tizen 2.3
* @privlevel public
* @brief Gets the supported WPS (Wi-Fi Protected Setup) types.
* @since_tizen 2.3
* @privlevel public
- * @privilege http://tizen.org/privilege/wifidirect
+ * @privilege %http://tizen.org/privilege/wifidirect
* @param[in] callback The callback function to invoke
* @param[in] user_data The user data to be passed to the callback function
* @return @c 0 on success,
* @param[in] callback The callback function to invoke
* @param[in] user_data The user data to be passed to the callback function
* @return @c 0 on success,
* @brief Gets the WPS (Wi-Fi Protected Setup) type.
* @since_tizen 2.3
* @privlevel public
* @brief Gets the WPS (Wi-Fi Protected Setup) type.
* @since_tizen 2.3
* @privlevel public
- * @privilege http://tizen.org/privilege/wifidirect
+ * @privilege %http://tizen.org/privilege/wifidirect
* @param[out] type The type of WPS
* @return @c 0 on success,
* otherwise a negative error value
* @param[out] type The type of WPS
* @return @c 0 on success,
* otherwise a negative error value
* @brief Sets the requested WPS (Wi-Fi Protected Setup) type.
* @since_tizen 2.3
* @privlevel public
* @brief Sets the requested WPS (Wi-Fi Protected Setup) type.
* @since_tizen 2.3
* @privlevel public
- * @privilege http://tizen.org/privilege/wifidirect
+ * @privilege %http://tizen.org/privilege/wifidirect
* @param[in] type The type of WPS
* @return @c 0 on success,
* otherwise a negative error value
* @param[in] type The type of WPS
* @return @c 0 on success,
* otherwise a negative error value
* @brief Gets the requested WPS (Wi-Fi Protected Setup) type.
* @since_tizen 2.3
* @privlevel public
* @brief Gets the requested WPS (Wi-Fi Protected Setup) type.
* @since_tizen 2.3
* @privlevel public
- * @privilege http://tizen.org/privilege/wifidirect
+ * @privilege %http://tizen.org/privilege/wifidirect
* @param[out] type The type of WPS
* @return @c 0 on success,
* otherwise a negative error value
* @param[out] type The type of WPS
* @return @c 0 on success,
* otherwise a negative error value
* @brief Sets the intent of the group owner.
* @since_tizen 2.3
* @privlevel public
* @brief Sets the intent of the group owner.
* @since_tizen 2.3
* @privlevel public
- * @privilege http://tizen.org/privilege/wifidirect
+ * @privilege %http://tizen.org/privilege/wifidirect
* @remarks The range of intent is 0 - 15. The higher the @a intent is,
* the higher the probability to be the group owner is.
* @param[in] intent The intent of the group owner
* @remarks The range of intent is 0 - 15. The higher the @a intent is,
* the higher the probability to be the group owner is.
* @param[in] intent The intent of the group owner
* @brief Sets the intent of the group owner for each connection type.
* @since_tizen 5.0
* @privlevel public
* @brief Sets the intent of the group owner for each connection type.
* @since_tizen 5.0
* @privlevel public
- * @privilege http://tizen.org/privilege/wifidirect
+ * @privilege %http://tizen.org/privilege/wifidirect
* @remarks The range of intent is 0 - 15. The higher the @a intent is, the higher the probability to be the group owner is.
* @param[in] type The type of connection for a peer device
* @param[in] intent The intent of the group owner
* @remarks The range of intent is 0 - 15. The higher the @a intent is, the higher the probability to be the group owner is.
* @param[in] type The type of connection for a peer device
* @param[in] intent The intent of the group owner
* @brief Gets the intent of the group owner.
* @since_tizen 2.3
* @privlevel public
* @brief Gets the intent of the group owner.
* @since_tizen 2.3
* @privlevel public
- * @privilege http://tizen.org/privilege/wifidirect
+ * @privilege %http://tizen.org/privilege/wifidirect
* @param[out] intent The intent of the group owner
* @return @c 0 on success,
* otherwise a negative error value
* @param[out] intent The intent of the group owner
* @return @c 0 on success,
* otherwise a negative error value
* @brief Gets the intent of the group owner for each connection type.
* @since_tizen 5.0
* @privlevel public
* @brief Gets the intent of the group owner for each connection type.
* @since_tizen 5.0
* @privlevel public
- * @privilege http://tizen.org/privilege/wifidirect
+ * @privilege %http://tizen.org/privilege/wifidirect
* @param[in] type The type of connection for a peer device
* @param[out] intent The intent of the group owner
* @return 0 on success, otherwise a negative error value
* @param[in] type The type of connection for a peer device
* @param[out] intent The intent of the group owner
* @return 0 on success, otherwise a negative error value
* @brief Sets the max number of clients.
* @since_tizen 2.3
* @privlevel public
* @brief Sets the max number of clients.
* @since_tizen 2.3
* @privlevel public
- * @privilege http://tizen.org/privilege/wifidirect
+ * @privilege %http://tizen.org/privilege/wifidirect
* @param[in] max The max number of clients
* @return @c 0 on success,
* otherwise a negative error value
* @param[in] max The max number of clients
* @return @c 0 on success,
* otherwise a negative error value
* @brief Gets the max number of clients.
* @since_tizen 2.3
* @privlevel public
* @brief Gets the max number of clients.
* @since_tizen 2.3
* @privlevel public
- * @privilege http://tizen.org/privilege/wifidirect
+ * @privilege %http://tizen.org/privilege/wifidirect
* @param[in] max The max number of clients
* @return @c 0 on success,
* otherwise a negative error value
* @param[in] max The max number of clients
* @return @c 0 on success,
* otherwise a negative error value
* When creating Wi-Fi Direct Group, this password will be used.
* @since_tizen 2.4
* @privlevel public
* When creating Wi-Fi Direct Group, this password will be used.
* @since_tizen 2.4
* @privlevel public
- * @privilege http://tizen.org/privilege/wifidirect
+ * @privilege %http://tizen.org/privilege/wifidirect
* @remarks A peer can connect to this group as Wi-Fi Infrastructured mode with a passphrase.
* @param[in] passphrase new wpa password to set. Application must set the new password before.
* @return @c 0 on success,
* @remarks A peer can connect to this group as Wi-Fi Infrastructured mode with a passphrase.
* @param[in] passphrase new wpa password to set. Application must set the new password before.
* @return @c 0 on success,
* @brief Gets the Wi-Fi Protected Access (WPA) password when creating Wi-Fi Direct Group.
* @since_tizen 2.4
* @privlevel public
* @brief Gets the Wi-Fi Protected Access (WPA) password when creating Wi-Fi Direct Group.
* @since_tizen 2.4
* @privlevel public
- * @privilege http://tizen.org/privilege/wifidirect
+ * @privilege %http://tizen.org/privilege/wifidirect
* @remarks @a passphrase must be released with free().
* @param[out] passphrase Pointer to store wpa password. Application must free this memory
* @return @c 0 on success,
* @remarks @a passphrase must be released with free().
* @param[out] passphrase Pointer to store wpa password. Application must free this memory
* @return @c 0 on success,
* @brief Gets the operating channel.
* @since_tizen 2.3
* @privlevel public
* @brief Gets the operating channel.
* @since_tizen 2.3
* @privlevel public
- * @privilege http://tizen.org/privilege/wifidirect
+ * @privilege %http://tizen.org/privilege/wifidirect
* @param[out] channel The operating channel
* @return @c 0 on success,
* otherwise a negative error value
* @param[out] channel The operating channel
* @return @c 0 on success,
* otherwise a negative error value
* @brief Sets the Autoconnection mode.
* @since_tizen 2.3
* @privlevel public
* @brief Sets the Autoconnection mode.
* @since_tizen 2.3
* @privlevel public
- * @privilege http://tizen.org/privilege/wifidirect
+ * @privilege %http://tizen.org/privilege/wifidirect
* @param[in] mode Describes the mode of connection. In case of TRUE \n
* auto-connection will be taken care by framework
* @return @c 0 on success,
* @param[in] mode Describes the mode of connection. In case of TRUE \n
* auto-connection will be taken care by framework
* @return @c 0 on success,
* if (auto_connect)
* ret = wifi_direct_set_autoconnection_mode(true);
* else
* if (auto_connect)
* ret = wifi_direct_set_autoconnection_mode(true);
* else
- * ret = wifi_direct_set_sutoconnection_mode(false);
+ * ret = wifi_direct_set_autoconnection_mode(false);
*
* if (ret != WIFI_DIRECT_ERROR_NONE) {
* printf("Failed to set autoconnection mode\n");
*
* if (ret != WIFI_DIRECT_ERROR_NONE) {
* printf("Failed to set autoconnection mode\n");
* @brief Gets the Autoconnection mode status.
* @since_tizen 2.3
* @privlevel public
* @brief Gets the Autoconnection mode status.
* @since_tizen 2.3
* @privlevel public
- * @privilege http://tizen.org/privilege/wifidirect
+ * @privilege %http://tizen.org/privilege/wifidirect
* @param[out] mode Describes the auto connection mode of framework has set.
* @return @c 0 on success,
* otherwise a negative error value
* @param[out] mode Describes the auto connection mode of framework has set.
* @return @c 0 on success,
* otherwise a negative error value
* @brief Allows a device to connect automatically.
* @since_tizen 2.4
* @privlevel public
* @brief Allows a device to connect automatically.
* @since_tizen 2.4
* @privlevel public
- * @privilege http://tizen.org/privilege/wifidirect
+ * @privilege %http://tizen.org/privilege/wifidirect
* @param[in] mac_address Device MAC address to allow autoconnection
* @return @c 0 on success,
* otherwise a negative error value
* @param[in] mac_address Device MAC address to allow autoconnection
* @return @c 0 on success,
* otherwise a negative error value
* while creating a group and establishing a connection.
* @since_tizen 2.3
* @privlevel public
* while creating a group and establishing a connection.
* @since_tizen 2.3
* @privlevel public
- * @privilege http://tizen.org/privilege/wifidirect
+ * @privilege %http://tizen.org/privilege/wifidirect
* @param[in] enabled The status of persistent group: (@c true = enabled, @c false = disabled)
* @return @c 0 on success,
* otherwise a negative error value
* @param[in] enabled The status of persistent group: (@c true = enabled, @c false = disabled)
* @return @c 0 on success,
* otherwise a negative error value
- * ret = wifi_direct_set_persistence_group_enabled(true);
+ * ret = wifi_direct_set_persistent_group_enabled(true);
*
* if (ret != WIFI_DIRECT_ERROR_NONE) {
* printf("Failed to set persistence group enabled\n");
*
* if (ret != WIFI_DIRECT_ERROR_NONE) {
* printf("Failed to set persistence group enabled\n");
* @brief Checks whether the persistent group is enabled or disabled.
* @since_tizen 2.3
* @privlevel public
* @brief Checks whether the persistent group is enabled or disabled.
* @since_tizen 2.3
* @privlevel public
- * @privilege http://tizen.org/privilege/wifidirect
+ * @privilege %http://tizen.org/privilege/wifidirect
* @param[out] enabled The status of the persistent group: (@c true = enabled, @c false = disabled)
* @return @c 0 on success,
* otherwise a negative error value
* @param[out] enabled The status of the persistent group: (@c true = enabled, @c false = disabled)
* @return @c 0 on success,
* otherwise a negative error value
* @brief Gets the persistent groups.
* @since_tizen 2.3
* @privlevel public
* @brief Gets the persistent groups.
* @since_tizen 2.3
* @privlevel public
- * @privilege http://tizen.org/privilege/wifidirect
+ * @privilege %http://tizen.org/privilege/wifidirect
* @param[in] callback The callback function to invoke
* @param[in] user_data The user data to be passed to the callback function
* @return @c 0 on success,
* @param[in] callback The callback function to invoke
* @param[in] user_data The user data to be passed to the callback function
* @return @c 0 on success,
* @brief Removes a persistent group.
* @since_tizen 2.3
* @privlevel public
* @brief Removes a persistent group.
* @since_tizen 2.3
* @privlevel public
- * @privilege http://tizen.org/privilege/wifidirect
+ * @privilege %http://tizen.org/privilege/wifidirect
* @param[in] mac_address The MAC address of the persistent group owner
* @param[in] ssid The SSID (Service Set Identifier) of the persistent group owner
* @return @c 0 on success,
* @param[in] mac_address The MAC address of the persistent group owner
* @param[in] ssid The SSID (Service Set Identifier) of the persistent group owner
* @return @c 0 on success,
* @brief Starts wifi direct service discovery.
* @since_tizen 2.3
* @privlevel public
* @brief Starts wifi direct service discovery.
* @since_tizen 2.3
* @privlevel public
- * @privilege http://tizen.org/privilege/wifidirect
+ * @privilege %http://tizen.org/privilege/wifidirect
* @param[in] mac_address The MAC address of servicing device. A broadcast \n
* will be sent when MAC is SET to ZERO
* @param[in] service_type Describes the type of service
* @param[in] mac_address The MAC address of servicing device. A broadcast \n
* will be sent when MAC is SET to ZERO
* @param[in] service_type Describes the type of service
* @brief Cancels an ongoing wifi direct service discovery.
* @since_tizen 2.3
* @privlevel public
* @brief Cancels an ongoing wifi direct service discovery.
* @since_tizen 2.3
* @privlevel public
- * @privilege http://tizen.org/privilege/wifidirect
+ * @privilege %http://tizen.org/privilege/wifidirect
* @param[in] mac_address The MAC address of servicing device. A broadcast \n
* will be sent when MAC is SET to ZERO
* @param[in] service_type Describes the type of service
* @param[in] mac_address The MAC address of servicing device. A broadcast \n
* will be sent when MAC is SET to ZERO
* @param[in] service_type Describes the type of service
* wifi_direct_activate(); // Activate Wi-Fi Direct
*
* wifi_direct_start_service_discovery(NULL,
* wifi_direct_activate(); // Activate Wi-Fi Direct
*
* wifi_direct_start_service_discovery(NULL,
- * WIFI_DIRECT_SERVICE_TYPE); // start broadcast service discovery
+ * WIFI_DIRECT_SERVICE_TYPE_ALL); // start broadcast service discovery
* @brief Registers for a service using Wi-Fi Direct Service Discovery.
* @since_tizen 2.3
* @privlevel public
* @brief Registers for a service using Wi-Fi Direct Service Discovery.
* @since_tizen 2.3
* @privlevel public
- * @privilege http://tizen.org/privilege/wifidirect
+ * @privilege %http://tizen.org/privilege/wifidirect
* @param[in] service_type Describes the type of service.
* @param[in] info1 Describes the information of service. It is service-specific
* @param[in] info2 Describes the information of service. It is service-specific
* @param[in] service_type Describes the type of service.
* @param[in] info1 Describes the information of service. It is service-specific
* @param[in] info2 Describes the information of service. It is service-specific
* @brief Deregisters for a service used for Wi-Fi Direct Service Discovery.
* @since_tizen 2.3
* @privlevel public
* @brief Deregisters for a service used for Wi-Fi Direct Service Discovery.
* @since_tizen 2.3
* @privlevel public
- * @privilege http://tizen.org/privilege/wifidirect
+ * @privilege %http://tizen.org/privilege/wifidirect
* @param[in] service_id A Service ID for which service has to be deregistered
* @return @c 0 on success,
* otherwise a negative error value
* @param[in] service_id A Service ID for which service has to be deregistered
* @return @c 0 on success,
* otherwise a negative error value
* @brief Initializes OR Deintializes the WiFi Direct Display (MIRACAST) service.
* @since_tizen 2.3
* @privlevel public
* @brief Initializes OR Deintializes the WiFi Direct Display (MIRACAST) service.
* @since_tizen 2.3
* @privlevel public
- * @privilege http://tizen.org/privilege/wifidirect
+ * @privilege %http://tizen.org/privilege/wifidirect
* @param[in] enable Enables/Disables Service based on the value TRUE/FALSE
* @return @c 0 on success,
* otherwise a negative error value
* @param[in] enable Enables/Disables Service based on the value TRUE/FALSE
* @return @c 0 on success,
* otherwise a negative error value
* @brief Gets the information of a discovered peer.
* @since_tizen 2.3
* @privlevel public
* @brief Gets the information of a discovered peer.
* @since_tizen 2.3
* @privlevel public
- * @privilege http://tizen.org/privilege/wifidirect
+ * @privilege %http://tizen.org/privilege/wifidirect
* @param[in] mac_address The MAC address of peer to get
* @param[out] peer_info The peer information to be passed
* @return @c 0 on success,
* @param[in] mac_address The MAC address of peer to get
* @param[out] peer_info The peer information to be passed
* @return @c 0 on success,
* only in assigned listen channel.
* @since_tizen 2.4
* @privlevel public
* only in assigned listen channel.
* @since_tizen 2.4
* @privlevel public
- * @privilege http://tizen.org/privilege/wifidirect
+ * @privilege %http://tizen.org/privilege/wifidirect
* @return @c 0 on success,
* otherwise a negative error value
* @retval #WIFI_DIRECT_ERROR_NONE Successful
* @return @c 0 on success,
* otherwise a negative error value
* @retval #WIFI_DIRECT_ERROR_NONE Successful
* @brief Disables Wi-Fi Display functionality & disables the support of WFD Information Element (IE).
* @since_tizen 2.4
* @privlevel public
* @brief Disables Wi-Fi Display functionality & disables the support of WFD Information Element (IE).
* @since_tizen 2.4
* @privlevel public
- * @privilege http://tizen.org/privilege/wifidirect
+ * @privilege %http://tizen.org/privilege/wifidirect
* @return @c 0 on success,
* otherwise a negative error value
* @retval #WIFI_DIRECT_ERROR_NONE Successful
* @return @c 0 on success,
* otherwise a negative error value
* @retval #WIFI_DIRECT_ERROR_NONE Successful
* @brief Sets the Wi-Fi Display parameters for the WFD IE of local device.
* @since_tizen 2.4
* @privlevel public
* @brief Sets the Wi-Fi Display parameters for the WFD IE of local device.
* @since_tizen 2.4
* @privlevel public
- * @privilege http://tizen.org/privilege/wifidirect
+ * @privilege %http://tizen.org/privilege/wifidirect
* @param[in] type WFD Device Type: define the Role of WFD device like source or sink
* @param[in] port Specifies Session Management Control Port number. It should be 2 bytes (0~65535)
* @param[in] hdcp CP support bit: (@c 1 = enable the hdcp support, @c 0 = disable the hdcp support)
* @param[in] type WFD Device Type: define the Role of WFD device like source or sink
* @param[in] port Specifies Session Management Control Port number. It should be 2 bytes (0~65535)
* @param[in] hdcp CP support bit: (@c 1 = enable the hdcp support, @c 0 = disable the hdcp support)
* @brief Sets the Wi-Fi Display Session Availability.
* @since_tizen 2.4
* @privlevel public
* @brief Sets the Wi-Fi Display Session Availability.
* @since_tizen 2.4
* @privlevel public
- * @privilege http://tizen.org/privilege/wifidirect
+ * @privilege %http://tizen.org/privilege/wifidirect
* @param[in] availability Wi-Fi Display Session Availability
* @return @c 0 on success,
* otherwise a negative error value
* @param[in] availability Wi-Fi Display Session Availability
* @return @c 0 on success,
* otherwise a negative error value
* @brief Gets the Wi-Fi Display parameters for the WFD IE of local device.
* @since_tizen 5.0
* @privlevel public
* @brief Gets the Wi-Fi Display parameters for the WFD IE of local device.
* @since_tizen 5.0
* @privlevel public
- * @privilege http://tizen.org/privilege/wifidirect
+ * @privilege %http://tizen.org/privilege/wifidirect
* @param[out] type WFD device type: role of WFD device like source or sink
* @param[out] port Session management control port number, it will be of 2 bytes (0~65535)
* @param[out] hdcp CP support bit: (@c 1 = hdcp support is enabled, @c 0 = hdcp support is disabled)
* @param[out] type WFD device type: role of WFD device like source or sink
* @param[out] port Session management control port number, it will be of 2 bytes (0~65535)
* @param[out] hdcp CP support bit: (@c 1 = hdcp support is enabled, @c 0 = hdcp support is disabled)
* @brief Gets the Wi-Fi Display Session Availability.
* @since_tizen 5.0
* @privlevel public
* @brief Gets the Wi-Fi Display Session Availability.
* @since_tizen 5.0
* @privlevel public
- * @privilege http://tizen.org/privilege/wifidirect
+ * @privilege %http://tizen.org/privilege/wifidirect
* @param[out] availability Wi-Fi display session availability
* @return @c 0 on success,
* otherwise a negative error value
* @param[out] availability Wi-Fi display session availability
* @return @c 0 on success,
* otherwise a negative error value
* @brief Gets the information of a peer's Wi-Fi Display device type.
* @since_tizen 2.4
* @privlevel public
* @brief Gets the information of a peer's Wi-Fi Display device type.
* @since_tizen 2.4
* @privlevel public
- * @privilege http://tizen.org/privilege/wifidirect
+ * @privilege %http://tizen.org/privilege/wifidirect
* @param[in] mac_address MAC Address of the PEER
* @param[out] type The information of a peer's Wi-Fi Display device type
* if there's Wi-Fi Direct information, this will be NULL
* @param[in] mac_address MAC Address of the PEER
* @param[out] type The information of a peer's Wi-Fi Display device type
* if there's Wi-Fi Direct information, this will be NULL
* @brief Gets the information of a peer's Wi-Fi Display session availability.
* @since_tizen 2.4
* @privlevel public
* @brief Gets the information of a peer's Wi-Fi Display session availability.
* @since_tizen 2.4
* @privlevel public
- * @privilege http://tizen.org/privilege/wifidirect
+ * @privilege %http://tizen.org/privilege/wifidirect
* @param[in] mac_address MAC Address of the PEER
* @param[out] availability The information of a peer's Wi-Fi Display session availability
* if there's Wi-Fi Direct information, this will be NULL
* @param[in] mac_address MAC Address of the PEER
* @param[out] availability The information of a peer's Wi-Fi Display session availability
* if there's Wi-Fi Direct information, this will be NULL
* @brief Gets the information of a peer's Wi-Fi Display HDCP support.
* @since_tizen 2.4
* @privlevel public
* @brief Gets the information of a peer's Wi-Fi Display HDCP support.
* @since_tizen 2.4
* @privlevel public
- * @privilege http://tizen.org/privilege/wifidirect
+ * @privilege %http://tizen.org/privilege/wifidirect
* @param[in] mac_address MAC Address of the PEER
* @param[out] hdcp The information of a peer's Wi-Fi Display HDCP support
* if there's Wi-Fi Direct information, this will be NULL
* @param[in] mac_address MAC Address of the PEER
* @param[out] hdcp The information of a peer's Wi-Fi Display HDCP support
* if there's Wi-Fi Direct information, this will be NULL
* @brief Gets the information of a peer's Wi-Fi Display RTSP control port.
* @since_tizen 2.4
* @privlevel public
* @brief Gets the information of a peer's Wi-Fi Display RTSP control port.
* @since_tizen 2.4
* @privlevel public
- * @privilege http://tizen.org/privilege/wifidirect
+ * @privilege %http://tizen.org/privilege/wifidirect
* @param[in] mac_address MAC Address of the PEER
* @param[out] port The information of a peer's Wi-Fi Display RTSP control port
* if there's Wi-Fi Direct information, this will be NULL
* @param[in] mac_address MAC Address of the PEER
* @param[out] port The information of a peer's Wi-Fi Display RTSP control port
* if there's Wi-Fi Direct information, this will be NULL
* @brief Gets the information of a peer's Wi-Fi Display max throughput.
* @since_tizen 2.4
* @privlevel public
* @brief Gets the information of a peer's Wi-Fi Display max throughput.
* @since_tizen 2.4
* @privlevel public
- * @privilege http://tizen.org/privilege/wifidirect
+ * @privilege %http://tizen.org/privilege/wifidirect
* @param[in] mac_address MAC Address of the PEER
* @param[out] throughput The information of a peer's Wi-Fi Display max throughput (Mbps)
* if there's Wi-Fi Direct information, this will be NULL
* @param[in] mac_address MAC Address of the PEER
* @param[out] throughput The information of a peer's Wi-Fi Display max throughput (Mbps)
* if there's Wi-Fi Direct information, this will be NULL
* @brief Enables / Disables automatic group removal feature when all peers are disconnected.
* @since_tizen 3.0
* @privlevel public
* @brief Enables / Disables automatic group removal feature when all peers are disconnected.
* @since_tizen 3.0
* @privlevel public
- * @privilege http://tizen.org/privilege/wifidirect
+ * @privilege %http://tizen.org/privilege/wifidirect
* @param[in] enable Enables/Disables Group Removal feature based on the value TRUE/FALSE
* @return @c 0 on success,
* otherwise a negative error value
* @param[in] enable Enables/Disables Group Removal feature based on the value TRUE/FALSE
* @return @c 0 on success,
* otherwise a negative error value
* @brief Sets the timer which is used to expire the connection session.
* @since_tizen 3.0
* @privlevel public
* @brief Sets the timer which is used to expire the connection session.
* @since_tizen 3.0
* @privlevel public
- * @privilege http://tizen.org/privilege/wifidirect
+ * @privilege %http://tizen.org/privilege/wifidirect
* @param[in] seconds Set the connection session timer value in seconds
* @return @c 0 on success,
* otherwise a negative error value
* @param[in] seconds Set the connection session timer value in seconds
* @return @c 0 on success,
* otherwise a negative error value
* @brief Gets the timer which is used to expire the connection session.
* @since_tizen 3.0
* @privlevel public
* @brief Gets the timer which is used to expire the connection session.
* @since_tizen 3.0
* @privlevel public
- * @privilege http://tizen.org/privilege/wifidirect
+ * @privilege %http://tizen.org/privilege/wifidirect
* @param[out] seconds Connection session timer value
* @return @c 0 on success,
* otherwise a negative error value
* @param[out] seconds Connection session timer value
* @return @c 0 on success,
* otherwise a negative error value
* @brief Gets the information of a peer's RSSI value.
* @since_tizen 3.0
* @privlevel public
* @brief Gets the information of a peer's RSSI value.
* @since_tizen 3.0
* @privlevel public
- * @privilege http://tizen.org/privilege/wifidirect
+ * @privilege %http://tizen.org/privilege/wifidirect
* @param[in] mac_address MAC Address of the peer device
* @param[out] rssi RSSI value of the peer device
* @return @c 0 on success,
* @param[in] mac_address MAC Address of the peer device
* @param[out] rssi RSSI value of the peer device
* @return @c 0 on success,
* @brief Adds the Wi-Fi Vendor Specific Information Element (VSIE) to specific frame type.
* @since_tizen 4.0
* @privlevel public
* @brief Adds the Wi-Fi Vendor Specific Information Element (VSIE) to specific frame type.
* @since_tizen 4.0
* @privlevel public
- * @privilege http://tizen.org/privilege/wifidirect
+ * @privilege %http://tizen.org/privilege/wifidirect
* @remarks @a vsie_str for @a frame_id will be in effect until Wi-Fi Direct is deactivated.
* @param[in] frame_id frame ID for setting VSIE
* @param[in] vsie_str VSIE data
* @remarks @a vsie_str for @a frame_id will be in effect until Wi-Fi Direct is deactivated.
* @param[in] frame_id frame ID for setting VSIE
* @param[in] vsie_str VSIE data
* @brief Gets the Wi-Fi Vendor Specific Information Elements (VSIE) from specific frame.
* @since_tizen 4.0
* @privlevel public
* @brief Gets the Wi-Fi Vendor Specific Information Elements (VSIE) from specific frame.
* @since_tizen 4.0
* @privlevel public
- * @privilege http://tizen.org/privilege/wifidirect
+ * @privilege %http://tizen.org/privilege/wifidirect
* @remarks @a vsie_str must be released with free().
* @param[in] frame_id frame ID for setting VSIE
* @param[out] vsie_str VSIE data
* @remarks @a vsie_str must be released with free().
* @param[in] frame_id frame ID for setting VSIE
* @param[out] vsie_str VSIE data
* @brief Removes the Wi-Fi Vendor Specific Information Element (VSIE) from specific frame.
* @since_tizen 4.0
* @privlevel public
* @brief Removes the Wi-Fi Vendor Specific Information Element (VSIE) from specific frame.
* @since_tizen 4.0
* @privlevel public
- * @privilege http://tizen.org/privilege/wifidirect
+ * @privilege %http://tizen.org/privilege/wifidirect
* @remarks @a vsie_str for @a frame_id will be in effect until Wi-Fi Direct is deactivated.
* @param[in] frame_id frame ID for removing VSIE
* @param[in] vsie_str VSIE data
* @remarks @a vsie_str for @a frame_id will be in effect until Wi-Fi Direct is deactivated.
* @param[in] frame_id frame ID for removing VSIE
* @param[in] vsie_str VSIE data
* @brief Gets the information of peer devices which is in the connecting state.
* @since_tizen 4.0
* @privlevel public
* @brief Gets the information of peer devices which is in the connecting state.
* @since_tizen 4.0
* @privlevel public
- * @privilege http://tizen.org/privilege/wifidirect
+ * @privilege %http://tizen.org/privilege/wifidirect
* @remarks @a peer_info must be released with free().
* @param[out] peer_info connecting peer device data
* @return @c 0 on success,
* @remarks @a peer_info must be released with free().
* @param[out] peer_info connecting peer device data
* @return @c 0 on success,
- * case WIFI_DIRECT_CONNECTON_RSP:
+ * case WIFI_DIRECT_CONNECTION_RSP:
* printf("Connected\n");
* break;
*
* printf("Connected\n");
* break;
*
* @brief Gets the vendor specific information element (VSIE) of a peer.
* @since_tizen 5.0
* @privlevel public
* @brief Gets the vendor specific information element (VSIE) of a peer.
* @since_tizen 5.0
* @privlevel public
- * @privilege http://tizen.org/privilege/wifidirect
+ * @privilege %http://tizen.org/privilege/wifidirect
* @remarks @a vsie must be released with free().
* @param[in] mac_address MAC Address of the PEER
* @param[out] vsie The vendor specific information element (VSIE) of peer
* @remarks @a vsie must be released with free().
* @param[in] mac_address MAC Address of the PEER
* @param[out] vsie The vendor specific information element (VSIE) of peer
* @brief Sets the advertizing WPS (Wi-Fi Protected Setup) type.
* @since_tizen 5.0
* @privlevel public
* @brief Sets the advertizing WPS (Wi-Fi Protected Setup) type.
* @since_tizen 5.0
* @privlevel public
- * @privilege http://tizen.org/privilege/wifidirect
+ * @privilege %http://tizen.org/privilege/wifidirect
* @param[in] type The type of WPS. composition of #wifi_direct_config_method_type_e
* for example #WIFI_DIRECT_CONFIG_METHOD_PBC|#WIFI_DIRECT_CONFIG_METHOD_PIN_DISPLAY
* Use #WIFI_DIRECT_CONFIG_METHOD_DEFAULT to reset to default value
* @param[in] type The type of WPS. composition of #wifi_direct_config_method_type_e
* for example #WIFI_DIRECT_CONFIG_METHOD_PBC|#WIFI_DIRECT_CONFIG_METHOD_PIN_DISPLAY
* Use #WIFI_DIRECT_CONFIG_METHOD_DEFAULT to reset to default value
* @brief Gets the advertizing WPS (Wi-Fi Protected Setup) type.
* @since_tizen 5.0
* @privlevel public
* @brief Gets the advertizing WPS (Wi-Fi Protected Setup) type.
* @since_tizen 5.0
* @privlevel public
- * @privilege http://tizen.org/privilege/wifidirect
+ * @privilege %http://tizen.org/privilege/wifidirect
* @param[out] type The type of WPS. composition of #wifi_direct_config_method_type_e
* @return 0 on success, otherwise a negative error value
* @retval #WIFI_DIRECT_ERROR_NONE Successful
* @param[out] type The type of WPS. composition of #wifi_direct_config_method_type_e
* @return 0 on success, otherwise a negative error value
* @retval #WIFI_DIRECT_ERROR_NONE Successful
* @brief Removes a persistent device.
* @since_tizen 5.0
* @privlevel public
* @brief Removes a persistent device.
* @since_tizen 5.0
* @privlevel public
- * @privilege http://tizen.org/privilege/wifidirect
+ * @privilege %http://tizen.org/privilege/wifidirect
* @param[in] mac_address The MAC address of the persistent group owner
* @return 0 on success, otherwise a negative error value
* @retval #WIFI_DIRECT_ERROR_NONE Successful
* @param[in] mac_address The MAC address of the persistent group owner
* @return 0 on success, otherwise a negative error value
* @retval #WIFI_DIRECT_ERROR_NONE Successful
* @brief Removes all persistent devices.
* @since_tizen 5.0
* @privlevel public
* @brief Removes all persistent devices.
* @since_tizen 5.0
* @privlevel public
- * @privilege http://tizen.org/privilege/wifidirect
+ * @privilege %http://tizen.org/privilege/wifidirect
* @return 0 on success, otherwise a negative error value
* @retval #WIFI_DIRECT_ERROR_NONE Successful
* @retval #WIFI_DIRECT_ERROR_OPERATION_FAILED Operation failed
* @return 0 on success, otherwise a negative error value
* @retval #WIFI_DIRECT_ERROR_NONE Successful
* @retval #WIFI_DIRECT_ERROR_OPERATION_FAILED Operation failed