xea: spl: Disable pull UP for GPIO0_2{35}

On the imx287 pin GPMI_WRN (GPIO0_25) no PullUP is available that can be
enabled.

To get the same behavior for both boot select pins (i.e. GPIO0_2{35})
disable pull UPs on both.

Signed-off-by: Lukasz Majewski <lukma@denx.de>

diff --git a/board/liebherr/xea/spl_xea.c b/board/liebherr/xea/spl_xea.c
index d88b75b..192f68f 100644 (file)
--- a/board/liebherr/xea/spl_xea.c
+++ b/board/liebherr/xea/spl_xea.c
@@ -20,7 +20,7 @@
 #include <asm/arch/sys_proto.h>
 
 #define        MUX_CONFIG_LCD  (MXS_PAD_3V3 | MXS_PAD_4MA | MXS_PAD_NOPULL)
 #include <asm/arch/sys_proto.h>
 
 #define        MUX_CONFIG_LCD  (MXS_PAD_3V3 | MXS_PAD_4MA | MXS_PAD_NOPULL)

-#define        MUX_CONFIG_BOOT (MXS_PAD_3V3 | MXS_PAD_PULLUP)
+#define        MUX_CONFIG_BOOT (MXS_PAD_3V3)

 #define        MUX_CONFIG_TSC  (MXS_PAD_3V3 | MXS_PAD_8MA | MXS_PAD_PULLUP)
 #define        MUX_CONFIG_SSP0 (MXS_PAD_3V3 | MXS_PAD_12MA | MXS_PAD_PULLUP)
 #define        MUX_CONFIG_SSP2 (MXS_PAD_3V3 | MXS_PAD_4MA | MXS_PAD_PULLUP)
 #define        MUX_CONFIG_TSC  (MXS_PAD_3V3 | MXS_PAD_8MA | MXS_PAD_PULLUP)
 #define        MUX_CONFIG_SSP0 (MXS_PAD_3V3 | MXS_PAD_12MA | MXS_PAD_PULLUP)
 #define        MUX_CONFIG_SSP2 (MXS_PAD_3V3 | MXS_PAD_4MA | MXS_PAD_PULLUP)