commit
c88db0eff9722fc2b6c4d172a50471d20e08ecc6 upstream.
Make sure to disable the alarm before updating the four alarm time
registers to avoid spurious alarms during the update.
Note that the disable needs to be done outside of the ctrl_reg_lock
section to prevent a racing alarm interrupt from disabling the newly set
alarm when the lock is released.
Fixes:
9a9a54ad7aa2 ("drivers/rtc: add support for Qualcomm PMIC8xxx RTC")
Cc: stable@vger.kernel.org # 3.1
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: David Collins <quic_collinsd@quicinc.com>
Link: https://lore.kernel.org/r/20230202155448.6715-2-johan+linaro@kernel.org
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
{
int rc, i;
u8 value[NUM_8_BIT_RTC_REGS];
{
int rc, i;
u8 value[NUM_8_BIT_RTC_REGS];
unsigned long secs, irq_flags;
struct pm8xxx_rtc *rtc_dd = dev_get_drvdata(dev);
const struct pm8xxx_rtc_regs *regs = rtc_dd->regs;
unsigned long secs, irq_flags;
struct pm8xxx_rtc *rtc_dd = dev_get_drvdata(dev);
const struct pm8xxx_rtc_regs *regs = rtc_dd->regs;
+ rc = regmap_update_bits(rtc_dd->regmap, regs->alarm_ctrl,
+ regs->alarm_en, 0);
+ if (rc)
+ return rc;
+
spin_lock_irqsave(&rtc_dd->ctrl_reg_lock, irq_flags);
rc = regmap_bulk_write(rtc_dd->regmap, regs->alarm_rw, value,
spin_lock_irqsave(&rtc_dd->ctrl_reg_lock, irq_flags);
rc = regmap_bulk_write(rtc_dd->regmap, regs->alarm_rw, value,
- rc = regmap_read(rtc_dd->regmap, regs->alarm_ctrl, &ctrl_reg);
- if (rc)
- goto rtc_rw_fail;
-
- if (alarm->enabled)
- ctrl_reg |= regs->alarm_en;
- else
- ctrl_reg &= ~regs->alarm_en;
-
- rc = regmap_write(rtc_dd->regmap, regs->alarm_ctrl, ctrl_reg);
- if (rc) {
- dev_err(dev, "Write to RTC alarm control register failed\n");
- goto rtc_rw_fail;
+ if (alarm->enabled) {
+ rc = regmap_update_bits(rtc_dd->regmap, regs->alarm_ctrl,
+ regs->alarm_en, regs->alarm_en);
+ if (rc)
+ goto rtc_rw_fail;
}
dev_dbg(dev, "Alarm Set for h:m:s=%ptRt, y-m-d=%ptRdr\n",
}
dev_dbg(dev, "Alarm Set for h:m:s=%ptRt, y-m-d=%ptRdr\n",