+/* Perform consistency checks on the current options. */
+
+static void
+mips_check_options (struct mips_set_options *opts, bfd_boolean abi_checks)
+{
+ /* Check the size of integer registers agrees with the ABI and ISA. */
+ if (opts->gp == 64 && !ISA_HAS_64BIT_REGS (opts->isa))
+ as_bad (_("`gp=64' used with a 32-bit processor"));
+ else if (abi_checks
+ && opts->gp == 32 && ABI_NEEDS_64BIT_REGS (mips_abi))
+ as_bad (_("`gp=32' used with a 64-bit ABI"));
+ else if (abi_checks
+ && opts->gp == 64 && ABI_NEEDS_32BIT_REGS (mips_abi))
+ as_bad (_("`gp=64' used with a 32-bit ABI"));
+
+ /* Check the size of the float registers agrees with the ABI and ISA. */
+ switch (opts->fp)
+ {
+ case 64:
+ if (!ISA_HAS_64BIT_FPRS (opts->isa))
+ as_bad (_("`fp=64' used with a 32-bit fpu"));
+ else if (abi_checks
+ && ABI_NEEDS_32BIT_REGS (mips_abi)
+ && !ISA_HAS_MXHC1 (opts->isa))
+ as_warn (_("`fp=64' used with a 32-bit ABI"));
+ break;
+ case 32:
+ if (abi_checks
+ && ABI_NEEDS_64BIT_REGS (mips_abi))
+ as_warn (_("`fp=32' used with a 64-bit ABI"));
+ break;
+ default:
+ as_bad (_("Unknown size of floating point registers"));
+ break;
+ }
+
+ if (opts->micromips == 1 && opts->mips16 == 1)
+ as_bad (_("`mips16' cannot be used with `micromips'"));
+}
+
+/* Perform consistency checks on the module level options exactly once.
+ This is a deferred check that happens:
+ at the first .set directive
+ or, at the first pseudo op that generates code (inc .dc.a)
+ or, at the first instruction
+ or, at the end. */
+
+static void
+file_mips_check_options (void)
+{
+ const struct mips_cpu_info *arch_info = 0;
+
+ if (file_mips_opts_checked)
+ return;
+
+ /* The following code determines the register size.
+ Similar code was added to GCC 3.3 (see override_options() in
+ config/mips/mips.c). The GAS and GCC code should be kept in sync
+ as much as possible. */
+
+ if (file_mips_opts.gp < 0)
+ {
+ /* Infer the integer register size from the ABI and processor.
+ Restrict ourselves to 32-bit registers if that's all the
+ processor has, or if the ABI cannot handle 64-bit registers. */
+ file_mips_opts.gp = (ABI_NEEDS_32BIT_REGS (mips_abi)
+ || !ISA_HAS_64BIT_REGS (file_mips_opts.isa))
+ ? 32 : 64;
+ }
+
+ if (file_mips_opts.fp < 0)
+ {
+ /* No user specified float register size.
+ ??? GAS treats single-float processors as though they had 64-bit
+ float registers (although it complains when double-precision
+ instructions are used). As things stand, saying they have 32-bit
+ registers would lead to spurious "register must be even" messages.
+ So here we assume float registers are never smaller than the
+ integer ones. */
+ if (file_mips_opts.gp == 64)
+ /* 64-bit integer registers implies 64-bit float registers. */
+ file_mips_opts.fp = 64;
+ else if ((file_mips_opts.ase & FP64_ASES)
+ && ISA_HAS_64BIT_FPRS (file_mips_opts.isa))
+ /* Handle ASEs that require 64-bit float registers, if possible. */
+ file_mips_opts.fp = 64;
+ else
+ /* 32-bit float registers. */
+ file_mips_opts.fp = 32;
+ }
+
+ arch_info = mips_cpu_info_from_arch (file_mips_opts.arch);
+
+ /* End of GCC-shared inference code. */
+
+ /* This flag is set when we have a 64-bit capable CPU but use only
+ 32-bit wide registers. Note that EABI does not use it. */
+ if (ISA_HAS_64BIT_REGS (file_mips_opts.isa)
+ && ((mips_abi == NO_ABI && file_mips_opts.gp == 32)
+ || mips_abi == O32_ABI))
+ mips_32bitmode = 1;
+
+ if (file_mips_opts.isa == ISA_MIPS1 && mips_trap)
+ as_bad (_("trap exception not supported at ISA 1"));
+
+ /* If the selected architecture includes support for ASEs, enable
+ generation of code for them. */
+ if (file_mips_opts.mips16 == -1)
+ file_mips_opts.mips16 = (CPU_HAS_MIPS16 (file_mips_opts.arch)) ? 1 : 0;
+ if (file_mips_opts.micromips == -1)
+ file_mips_opts.micromips = (CPU_HAS_MICROMIPS (file_mips_opts.arch))
+ ? 1 : 0;
+
+ /* Some ASEs require 64-bit FPRs, so -mfp32 should stop those ASEs from
+ being selected implicitly. */
+ if (file_mips_opts.fp != 64)
+ file_ase_explicit |= ASE_MIPS3D | ASE_MDMX | ASE_MSA;
+
+ /* If the user didn't explicitly select or deselect a particular ASE,
+ use the default setting for the CPU. */
+ file_mips_opts.ase |= (arch_info->ase & ~file_ase_explicit);
+
+ /* Set up the current options. These may change throughout assembly. */
+ mips_opts = file_mips_opts;
+
+ mips_check_isa_supports_ases ();
+ mips_check_options (&file_mips_opts, TRUE);
+ file_mips_opts_checked = TRUE;
+
+ if (!bfd_set_arch_mach (stdoutput, bfd_arch_mips, file_mips_opts.arch))
+ as_warn (_("could not set architecture and machine"));
+}
+