power: regulator: stpmu1: add power off delay

This patch adds a delay when regulators are disabled.
This delay is set to 5 ms to cover all use cases.
The worst use case actually seen is during a SD card power cycle.

Signed-off-by: Christophe Kerello <christophe.kerello@st.com>
Signed-off-by: Patrice Chotard <patrice.chotard@st.com>

diff --git a/drivers/power/regulator/stpmu1.c b/drivers/power/regulator/stpmu1.c
index 2dedb80..6eb2420 100644 (file)
--- a/drivers/power/regulator/stpmu1.c
+++ b/drivers/power/regulator/stpmu1.c
@@ -183,6 +183,8 @@ static int stpmu1_buck_get_enable(struct udevice *dev)
 static int stpmu1_buck_set_enable(struct udevice *dev, bool enable)
 {
        struct dm_regulator_uclass_platdata *uc_pdata;
 static int stpmu1_buck_set_enable(struct udevice *dev, bool enable)
 {
        struct dm_regulator_uclass_platdata *uc_pdata;

+       int delay = enable ? STPMU1_DEFAULT_START_UP_DELAY_MS :
+                            STPMU1_DEFAULT_STOP_DELAY_MS;

        int ret, uv;
 
        /* if regulator is already in the wanted state, nothing to do */
        int ret, uv;
 
        /* if regulator is already in the wanted state, nothing to do */


@@ -199,8 +201,7 @@ static int stpmu1_buck_set_enable(struct udevice *dev, bool enable)
        ret = pmic_clrsetbits(dev->parent,
                              STPMU1_BUCKX_CTRL_REG(dev->driver_data - 1),
                              STPMU1_BUCK_EN, enable ? STPMU1_BUCK_EN : 0);
        ret = pmic_clrsetbits(dev->parent,
                              STPMU1_BUCKX_CTRL_REG(dev->driver_data - 1),
                              STPMU1_BUCK_EN, enable ? STPMU1_BUCK_EN : 0);

-       if (enable)
-               mdelay(STPMU1_DEFAULT_START_UP_DELAY_MS);
+       mdelay(delay);

 
        return ret;
 }
 
        return ret;
 }


@@ -361,6 +362,8 @@ static int stpmu1_ldo_get_enable(struct udevice *dev)
 static int stpmu1_ldo_set_enable(struct udevice *dev, bool enable)
 {
        struct dm_regulator_uclass_platdata *uc_pdata;
 static int stpmu1_ldo_set_enable(struct udevice *dev, bool enable)
 {
        struct dm_regulator_uclass_platdata *uc_pdata;

+       int delay = enable ? STPMU1_DEFAULT_START_UP_DELAY_MS :
+                            STPMU1_DEFAULT_STOP_DELAY_MS;

        int ret, uv;
 
        /* if regulator is already in the wanted state, nothing to do */
        int ret, uv;
 
        /* if regulator is already in the wanted state, nothing to do */


@@ -377,8 +380,7 @@ static int stpmu1_ldo_set_enable(struct udevice *dev, bool enable)
        ret = pmic_clrsetbits(dev->parent,
                              STPMU1_LDOX_CTRL_REG(dev->driver_data - 1),
                              STPMU1_LDO_EN, enable ? STPMU1_LDO_EN : 0);
        ret = pmic_clrsetbits(dev->parent,
                              STPMU1_LDOX_CTRL_REG(dev->driver_data - 1),
                              STPMU1_LDO_EN, enable ? STPMU1_LDO_EN : 0);

-       if (enable)
-               mdelay(STPMU1_DEFAULT_START_UP_DELAY_MS);
+       mdelay(delay);

 
        return ret;
 }
 
        return ret;
 }


@@ -489,6 +491,8 @@ static int stpmu1_vref_ddr_get_enable(struct udevice *dev)
 
 static int stpmu1_vref_ddr_set_enable(struct udevice *dev, bool enable)
 {
 
 static int stpmu1_vref_ddr_set_enable(struct udevice *dev, bool enable)
 {

+       int delay = enable ? STPMU1_DEFAULT_START_UP_DELAY_MS :
+                            STPMU1_DEFAULT_STOP_DELAY_MS;

        int ret;
 
        /* if regulator is already in the wanted state, nothing to do */
        int ret;
 
        /* if regulator is already in the wanted state, nothing to do */


@@ -497,8 +501,7 @@ static int stpmu1_vref_ddr_set_enable(struct udevice *dev, bool enable)
 
        ret = pmic_clrsetbits(dev->parent, STPMU1_VREF_CTRL_REG,
                              STPMU1_VREF_EN, enable ? STPMU1_VREF_EN : 0);
 
        ret = pmic_clrsetbits(dev->parent, STPMU1_VREF_CTRL_REG,
                              STPMU1_VREF_EN, enable ? STPMU1_VREF_EN : 0);

-       if (enable)
-               mdelay(STPMU1_DEFAULT_START_UP_DELAY_MS);
+       mdelay(delay);

 
        return ret;
 }
 
        return ret;
 }


@@ -610,6 +613,8 @@ static int stpmu1_pwr_sw_get_enable(struct udevice *dev)
 static int stpmu1_pwr_sw_set_enable(struct udevice *dev, bool enable)
 {
        uint mask = 1 << dev->driver_data;
 static int stpmu1_pwr_sw_set_enable(struct udevice *dev, bool enable)
 {
        uint mask = 1 << dev->driver_data;

+       int delay = enable ? STPMU1_DEFAULT_START_UP_DELAY_MS :
+                            STPMU1_DEFAULT_STOP_DELAY_MS;

        int ret;
 
        ret = pmic_reg_read(dev->parent, STPMU1_USB_CTRL_REG);
        int ret;
 
        ret = pmic_reg_read(dev->parent, STPMU1_USB_CTRL_REG);


@@ -633,8 +638,7 @@ static int stpmu1_pwr_sw_set_enable(struct udevice *dev, bool enable)
 
        ret = pmic_clrsetbits(dev->parent, STPMU1_USB_CTRL_REG,
                              mask, enable ? mask : 0);
 
        ret = pmic_clrsetbits(dev->parent, STPMU1_USB_CTRL_REG,
                              mask, enable ? mask : 0);

-       if (enable)
-               mdelay(STPMU1_DEFAULT_START_UP_DELAY_MS);
+       mdelay(delay);

 
        return ret;
 }
 
        return ret;
 }

diff --git a/include/power/stpmu1.h b/include/power/stpmu1.h
index 61c58f3..5906fbf 100644 (file)
--- a/include/power/stpmu1.h
+++ b/include/power/stpmu1.h
@@ -44,6 +44,7 @@
 #define STPMU1_NVM_USER_STATUS_ERROR   BIT(1)
 
 #define STPMU1_DEFAULT_START_UP_DELAY_MS       1
 #define STPMU1_NVM_USER_STATUS_ERROR   BIT(1)
 
 #define STPMU1_DEFAULT_START_UP_DELAY_MS       1

+#define STPMU1_DEFAULT_STOP_DELAY_MS           5

 #define STPMU1_USB_BOOST_START_UP_DELAY_MS     10
 
 enum {
 #define STPMU1_USB_BOOST_START_UP_DELAY_MS     10
 
 enum {