This utilizes the new core voltage switch to power off the PL022
core voltage when it's not in use transmitting packets, if and
only if a core voltage switch is available.
Cc: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
msg->state = NULL;
if (msg->complete)
msg->complete(msg->context);
msg->state = NULL;
if (msg->complete)
msg->complete(msg->context);
- /* This message is completed, so let's turn off the clocks! */
+ /* This message is completed, so let's turn off the clocks & power */
clk_disable(pl022->clk);
amba_pclk_disable(pl022->adev);
clk_disable(pl022->clk);
amba_pclk_disable(pl022->adev);
+ amba_vcore_disable(pl022->adev);
/* Setup the SPI using the per chip configuration */
pl022->cur_chip = spi_get_ctldata(pl022->cur_msg->spi);
/*
/* Setup the SPI using the per chip configuration */
pl022->cur_chip = spi_get_ctldata(pl022->cur_msg->spi);
/*
- * We enable the clocks here, then the clocks will be disabled when
- * giveback() is called in each method (poll/interrupt/DMA)
+ * We enable the core voltage and clocks here, then the clocks
+ * and core will be disabled when giveback() is called in each method
+ * (poll/interrupt/DMA)
+ amba_vcore_enable(pl022->adev);
amba_pclk_enable(pl022->adev);
clk_enable(pl022->clk);
restore_state(pl022);
amba_pclk_enable(pl022->adev);
clk_enable(pl022->clk);
restore_state(pl022);
goto err_spi_register;
}
dev_dbg(dev, "probe succeded\n");
goto err_spi_register;
}
dev_dbg(dev, "probe succeded\n");
- /* Disable the silicon block pclk and clock it when needed */
+ /*
+ * Disable the silicon block pclk and any voltage domain and just
+ * power it up and clock it when it's needed
+ */
+ amba_vcore_disable(adev);
return 0;
err_spi_register:
return 0;
err_spi_register:
+ amba_vcore_enable(adev);
amba_pclk_enable(adev);
load_ssp_default_config(pl022);
amba_pclk_disable(adev);
amba_pclk_enable(adev);
load_ssp_default_config(pl022);
amba_pclk_disable(adev);
+ amba_vcore_disable(adev);
dev_dbg(&adev->dev, "suspended\n");
return 0;
}
dev_dbg(&adev->dev, "suspended\n");
return 0;
}