This hantick HTIX5288 touchpad can quickly fall in a wrong state if
there are too many open/close operations. This will either make it stop
reporting any input, or will shift all the input reads by a few bytes,
making it impossible to decode.
Here, we never release the probed touchpad runtime pm while the driver
is loaded, which should disable all runtime pm suspend/resumes.
This fast repetition of sleep/wakeup is also more likely to happen when
using runtime PM, which is why the quirk is done there, and not for all
power downs, which would include suspend or module removal.
Signed-off-by: Anisse Astier <anisse@astier.eu>
Cc: stable@vger.kernel.org
Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Tested-by: Philip Müller <philm@manjaro.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
#define I2C_HID_QUIRK_SET_PWR_WAKEUP_DEV BIT(0)
#define I2C_HID_QUIRK_NO_IRQ_AFTER_RESET BIT(1)
#define I2C_HID_QUIRK_RESEND_REPORT_DESCR BIT(2)
#define I2C_HID_QUIRK_SET_PWR_WAKEUP_DEV BIT(0)
#define I2C_HID_QUIRK_NO_IRQ_AFTER_RESET BIT(1)
#define I2C_HID_QUIRK_RESEND_REPORT_DESCR BIT(2)
+#define I2C_HID_QUIRK_NO_RUNTIME_PM BIT(3)
/* flags */
#define I2C_HID_STARTED 0
/* flags */
#define I2C_HID_STARTED 0
{ USB_VENDOR_ID_WEIDA, USB_DEVICE_ID_WEIDA_8755,
I2C_HID_QUIRK_SET_PWR_WAKEUP_DEV },
{ I2C_VENDOR_ID_HANTICK, I2C_PRODUCT_ID_HANTICK_5288,
{ USB_VENDOR_ID_WEIDA, USB_DEVICE_ID_WEIDA_8755,
I2C_HID_QUIRK_SET_PWR_WAKEUP_DEV },
{ I2C_VENDOR_ID_HANTICK, I2C_PRODUCT_ID_HANTICK_5288,
- I2C_HID_QUIRK_NO_IRQ_AFTER_RESET },
+ I2C_HID_QUIRK_NO_IRQ_AFTER_RESET |
+ I2C_HID_QUIRK_NO_RUNTIME_PM },
{ USB_VENDOR_ID_SIS_TOUCH, USB_DEVICE_ID_SIS10FB_TOUCH,
I2C_HID_QUIRK_RESEND_REPORT_DESCR },
{ 0, 0 }
{ USB_VENDOR_ID_SIS_TOUCH, USB_DEVICE_ID_SIS10FB_TOUCH,
I2C_HID_QUIRK_RESEND_REPORT_DESCR },
{ 0, 0 }
- pm_runtime_put(&client->dev);
+ if (!(ihid->quirks & I2C_HID_QUIRK_NO_RUNTIME_PM))
+ pm_runtime_put(&client->dev);
+
struct i2c_hid *ihid = i2c_get_clientdata(client);
struct hid_device *hid;
struct i2c_hid *ihid = i2c_get_clientdata(client);
struct hid_device *hid;
- pm_runtime_get_sync(&client->dev);
+ if (!(ihid->quirks & I2C_HID_QUIRK_NO_RUNTIME_PM))
+ pm_runtime_get_sync(&client->dev);
pm_runtime_disable(&client->dev);
pm_runtime_set_suspended(&client->dev);
pm_runtime_put_noidle(&client->dev);
pm_runtime_disable(&client->dev);
pm_runtime_set_suspended(&client->dev);
pm_runtime_put_noidle(&client->dev);